[net-next,v5,11/11] net: dsa: realtek: embed dsa_switch into realtek_priv
Commit Message
To eliminate the need for a second memory allocation for dsa_switch, it
has been embedded within realtek_priv.
Suggested-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
---
drivers/net/dsa/realtek/realtek.h | 2 +-
drivers/net/dsa/realtek/rtl8365mb.c | 12 ++++++------
drivers/net/dsa/realtek/rtl8366rb.c | 2 +-
drivers/net/dsa/realtek/rtl83xx.c | 18 +++++++-----------
4 files changed, 15 insertions(+), 19 deletions(-)
Comments
On Tue, Jan 30, 2024 at 08:13:30PM -0300, Luiz Angelo Daros de Luca wrote:
> To eliminate the need for a second memory allocation for dsa_switch, it
> has been embedded within realtek_priv.
>
> Suggested-by: Alvin Šipraga <alsi@bang-olufsen.dk>
> Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
> ---
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
I don't think it would be bad if you could just define a local variable
struct dsa_switch *ds = &priv->ds;
in all functions, including those which reference &priv->ds just once.
> diff --git a/drivers/net/dsa/realtek/realtek.h b/drivers/net/dsa/realtek/realtek.h
> index 864bb9a88f14..b80bfde1ad04 100644
> --- a/drivers/net/dsa/realtek/realtek.h
> +++ b/drivers/net/dsa/realtek/realtek.h
> @@ -61,7 +61,7 @@ struct realtek_priv {
> const struct realtek_variant *variant;
>
> spinlock_t lock; /* Locks around command writes */
> - struct dsa_switch *ds;
> + struct dsa_switch ds;
> struct irq_domain *irqdomain;
> bool leds_disabled;
>
> diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c
> index 778a962727ab..9066e34e9ace 100644
> --- a/drivers/net/dsa/realtek/rtl8365mb.c
> +++ b/drivers/net/dsa/realtek/rtl8365mb.c
> @@ -880,7 +880,7 @@ static int rtl8365mb_ext_config_rgmii(struct realtek_priv *priv, int port,
> if (!extint)
> return -ENODEV;
>
> - dp = dsa_to_port(priv->ds, port);
> + dp = dsa_to_port(&priv->ds, port);
Nitpick: I don't think it would be bad if you could just define a local variable
struct dsa_switch *ds = &priv->ds;
in all functions, including those which reference &priv->ds just once,
like this one.
> dn = dp->dn;
>
> /* Set the RGMII TX/RX delay
> diff --git a/drivers/net/dsa/realtek/rtl83xx.c b/drivers/net/dsa/realtek/rtl83xx.c
> index aa998e15c42b..f65e47339d5b 100644
> --- a/drivers/net/dsa/realtek/rtl83xx.c
> +++ b/drivers/net/dsa/realtek/rtl83xx.c
> @@ -226,16 +226,12 @@ int rtl83xx_register_switch(struct realtek_priv *priv)
> return ret;
> }
>
> - priv->ds = devm_kzalloc(priv->dev, sizeof(*priv->ds), GFP_KERNEL);
> - if (!priv->ds)
> - return -ENOMEM;
> + priv->ds.priv = priv;
> + priv->ds.dev = priv->dev;
> + priv->ds.ops = priv->variant->ds_ops;
> + priv->ds.num_ports = priv->num_ports;
And here, I think it would actually look better to dereference just
through "ds".
Also, priv->dev is dereferenced 4 times in rtl83xx_register_switch(),
maybe you could add a local variable for it in the patch that introduces
rtl83xx_register_switch().
>
> - priv->ds->priv = priv;
> - priv->ds->dev = priv->dev;
> - priv->ds->ops = priv->variant->ds_ops;
> - priv->ds->num_ports = priv->num_ports;
> -
> - ret = dsa_register_switch(priv->ds);
> + ret = dsa_register_switch(&priv->ds);
> if (ret) {
> dev_err_probe(priv->dev, ret, "unable to register switch\n");
> return ret;
>
>
> I don't think it would be bad if you could just define a local variable
>
> struct dsa_switch *ds = &priv->ds;
Yes, I'll use it. It does look better.
Regards,
Luiz
@@ -61,7 +61,7 @@ struct realtek_priv {
const struct realtek_variant *variant;
spinlock_t lock; /* Locks around command writes */
- struct dsa_switch *ds;
+ struct dsa_switch ds;
struct irq_domain *irqdomain;
bool leds_disabled;
@@ -880,7 +880,7 @@ static int rtl8365mb_ext_config_rgmii(struct realtek_priv *priv, int port,
if (!extint)
return -ENODEV;
- dp = dsa_to_port(priv->ds, port);
+ dp = dsa_to_port(&priv->ds, port);
dn = dp->dn;
/* Set the RGMII TX/RX delay
@@ -1543,7 +1543,7 @@ static void rtl8365mb_stats_setup(struct realtek_priv *priv)
for (i = 0; i < priv->num_ports; i++) {
struct rtl8365mb_port *p = &mb->ports[i];
- if (dsa_is_unused_port(priv->ds, i))
+ if (dsa_is_unused_port(&priv->ds, i))
continue;
/* Per-port spinlock to protect the stats64 data */
@@ -1564,7 +1564,7 @@ static void rtl8365mb_stats_teardown(struct realtek_priv *priv)
for (i = 0; i < priv->num_ports; i++) {
struct rtl8365mb_port *p = &mb->ports[i];
- if (dsa_is_unused_port(priv->ds, i))
+ if (dsa_is_unused_port(&priv->ds, i))
continue;
cancel_delayed_work_sync(&p->mib_work);
@@ -1963,7 +1963,7 @@ static int rtl8365mb_setup(struct dsa_switch *ds)
dev_info(priv->dev, "no interrupt support\n");
/* Configure CPU tagging */
- dsa_switch_for_each_cpu_port(cpu_dp, priv->ds) {
+ dsa_switch_for_each_cpu_port(cpu_dp, &priv->ds) {
cpu->mask |= BIT(cpu_dp->index);
if (cpu->trap_port == RTL8365MB_MAX_NUM_PORTS)
@@ -1978,7 +1978,7 @@ static int rtl8365mb_setup(struct dsa_switch *ds)
for (i = 0; i < priv->num_ports; i++) {
struct rtl8365mb_port *p = &mb->ports[i];
- if (dsa_is_unused_port(priv->ds, i))
+ if (dsa_is_unused_port(&priv->ds, i))
continue;
/* Forward only to the CPU */
@@ -1995,7 +1995,7 @@ static int rtl8365mb_setup(struct dsa_switch *ds)
* ports will still forward frames to the CPU despite being
* administratively down by default.
*/
- rtl8365mb_port_stp_state_set(priv->ds, i, BR_STATE_DISABLED);
+ rtl8365mb_port_stp_state_set(&priv->ds, i, BR_STATE_DISABLED);
/* Set up per-port private data */
p->priv = priv;
@@ -1675,7 +1675,7 @@ static int rtl8366rb_set_mc_index(struct realtek_priv *priv, int port, int index
* not drop any untagged or C-tagged frames. Make sure to update the
* filtering setting.
*/
- if (dsa_port_is_vlan_filtering(dsa_to_port(priv->ds, port)))
+ if (dsa_port_is_vlan_filtering(dsa_to_port(&priv->ds, port)))
ret = rtl8366rb_drop_untagged(priv, port, !pvid_enabled);
return ret;
@@ -226,16 +226,12 @@ int rtl83xx_register_switch(struct realtek_priv *priv)
return ret;
}
- priv->ds = devm_kzalloc(priv->dev, sizeof(*priv->ds), GFP_KERNEL);
- if (!priv->ds)
- return -ENOMEM;
+ priv->ds.priv = priv;
+ priv->ds.dev = priv->dev;
+ priv->ds.ops = priv->variant->ds_ops;
+ priv->ds.num_ports = priv->num_ports;
- priv->ds->priv = priv;
- priv->ds->dev = priv->dev;
- priv->ds->ops = priv->variant->ds_ops;
- priv->ds->num_ports = priv->num_ports;
-
- ret = dsa_register_switch(priv->ds);
+ ret = dsa_register_switch(&priv->ds);
if (ret) {
dev_err_probe(priv->dev, ret, "unable to register switch\n");
return ret;
@@ -256,7 +252,7 @@ EXPORT_SYMBOL_NS_GPL(rtl83xx_register_switch, REALTEK_DSA);
*/
void rtl83xx_unregister_switch(struct realtek_priv *priv)
{
- dsa_unregister_switch(priv->ds);
+ dsa_unregister_switch(&priv->ds);
}
EXPORT_SYMBOL_NS_GPL(rtl83xx_unregister_switch, REALTEK_DSA);
@@ -273,7 +269,7 @@ EXPORT_SYMBOL_NS_GPL(rtl83xx_unregister_switch, REALTEK_DSA);
*/
void rtl83xx_shutdown(struct realtek_priv *priv)
{
- dsa_switch_shutdown(priv->ds);
+ dsa_switch_shutdown(&priv->ds);
dev_set_drvdata(priv->dev, NULL);
}