diff mbox series

[v3,03/17] dt-bindings: pinctrl: allow pin controller device without unit address

Message ID 20240123-mbly-clk-v3-3-392b010b8281@bootlin.com
State New
Headers
Series Add support for Mobileye EyeQ5 system controller |

Commit Message

Théo Lebrun Jan. 23, 2024, 6:46 p.m. UTC 
  Allow a pin controller device to have no address, therefore no unit
address.

The previous $nodename was enforcing a unit address, but
scripts/dtc/checks.c enforced that names with unit addresses have reg
or ranges:

   Warning (unit_address_vs_reg): .../pinctrl@0: node has a unit
   name, but no reg or ranges property

Fix pinctrl.yaml to adopt a (pinctrl|pinmux)(-[a-z]+)? node name when
neither reg nor ranges are required. Use [a-z]+ to avoid conflicts with
pinctrl-consumer.yaml.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 Documentation/devicetree/bindings/pinctrl/pinctrl.yaml | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

Comments

Rob Herring Jan. 23, 2024, 8:57 p.m. UTC | #1 
On Tue, 23 Jan 2024 19:46:48 +0100, Théo Lebrun wrote:
> Allow a pin controller device to have no address, therefore no unit
> address.
> 
> The previous $nodename was enforcing a unit address, but
> scripts/dtc/checks.c enforced that names with unit addresses have reg
> or ranges:
> 
>    Warning (unit_address_vs_reg): .../pinctrl@0: node has a unit
>    name, but no reg or ranges property
> 
> Fix pinctrl.yaml to adopt a (pinctrl|pinmux)(-[a-z]+)? node name when
> neither reg nor ranges are required. Use [a-z]+ to avoid conflicts with
> pinctrl-consumer.yaml.
> 
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
> ---
>  Documentation/devicetree/bindings/pinctrl/pinctrl.yaml | 18 +++++++++++++++---
>  1 file changed, 15 insertions(+), 3 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml:45:8: [warning] wrong indentation: expected 8 but found 7 (indentation)
/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml:47:8: [warning] wrong indentation: expected 8 but found 7 (indentation)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240123-mbly-clk-v3-3-392b010b8281@bootlin.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml
index d471563119a9..1f1239c9b94d 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml
@@ -26,9 +26,6 @@  description: |
   controller device.
 
 properties:
-  $nodename:
-    pattern: "^(pinctrl|pinmux)(@[0-9a-f]+)?$"
-
   "#pinctrl-cells":
     description: >
       Number of pin control cells in addition to the index within the pin
@@ -42,4 +39,19 @@  properties:
       This property can be set either globally for the pin controller or in
       child nodes for individual pin group control.
 
+if:
+  anyOf:
+    - required:
+       - reg
+    - required:
+       - ranges
+then:
+  properties:
+    $nodename:
+      pattern: "^(pinctrl|pinmux)(@[0-9a-f]+)?$"
+else:
+  properties:
+    $nodename:
+      pattern: "^(pinctrl|pinmux)(-[a-z]+)?$"
+
 additionalProperties: true