[v7,05/20] x86/virt/tdx: Implement functions to make SEAMCALL
Commit Message
TDX introduces a new CPU mode: Secure Arbitration Mode (SEAM). This
mode runs only the TDX module itself or other code to load the TDX
module.
The host kernel communicates with SEAM software via a new SEAMCALL
instruction. This is conceptually similar to a guest->host hypercall,
except it is made from the host to SEAM software instead.
The TDX module defines a set of SEAMCALL leaf functions to allow the
host to initialize it, and to create and run protected VMs. SEAMCALL
leaf functions use an ABI different from the x86-64 system-v ABI.
Instead, they share the same ABI with the TDCALL leaf functions.
Implement a function __seamcall() to allow the host to make SEAMCALL
to SEAM software using the TDX_MODULE_CALL macro which is the common
assembly for both SEAMCALL and TDCALL.
SEAMCALL instruction causes #GP when SEAMRR isn't enabled, and #UD when
CPU is not in VMX operation. The current TDX_MODULE_CALL macro doesn't
handle any of them. There's no way to check whether the CPU is in VMX
operation or not.
Initializing the TDX module is done at runtime on demand, and it depends
on the caller to ensure CPU is in VMX operation before making SEAMCALL.
To avoid getting Oops when the caller mistakenly tries to initialize the
TDX module when CPU is not in VMX operation, extend the TDX_MODULE_CALL
macro to handle #UD (and also #GP, which can theoretically still happen
when TDX isn't actually enabled by the BIOS, i.e. due to BIOS bug).
Introduce two new TDX error codes for #UD and #GP respectively so the
caller can distinguish. Also, Opportunistically put the new TDX error
codes and the existing TDX_SEAMCALL_VMFAILINVALID into INTEL_TDX_HOST
Kconfig option as they are only used when it is on.
As __seamcall() can potentially return multiple error codes, besides the
actual SEAMCALL leaf function return code, also introduce a wrapper
function seamcall() to convert the __seamcall() error code to the kernel
error code, so the caller doesn't need to duplicate the code to check
return value of __seamcall() and return kernel error code accordingly.
Signed-off-by: Kai Huang <kai.huang@intel.com>
---
v6 -> v7:
- No change.
v5 -> v6:
- Added code to handle #UD and #GP (Dave).
- Moved the seamcall() wrapper function to this patch, and used a
temporary __always_unused to avoid compile warning (Dave).
- v3 -> v5 (no feedback on v4):
- Explicitly tell TDX_SEAMCALL_VMFAILINVALID is returned if the
SEAMCALL itself fails.
- Improve the changelog.
---
arch/x86/include/asm/tdx.h | 9 ++++++
arch/x86/virt/vmx/tdx/Makefile | 2 +-
arch/x86/virt/vmx/tdx/seamcall.S | 52 ++++++++++++++++++++++++++++++++
arch/x86/virt/vmx/tdx/tdx.c | 42 ++++++++++++++++++++++++++
arch/x86/virt/vmx/tdx/tdx.h | 8 +++++
arch/x86/virt/vmx/tdx/tdxcall.S | 19 ++++++++++--
6 files changed, 129 insertions(+), 3 deletions(-)
create mode 100644 arch/x86/virt/vmx/tdx/seamcall.S
Comments
On Mon, Nov 21, 2022 at 01:26:27PM +1300, Kai Huang wrote:
> +/*
> + * Wrapper of __seamcall() to convert SEAMCALL leaf function error code
> + * to kernel error code. @seamcall_ret and @out contain the SEAMCALL
> + * leaf function return code and the additional output respectively if
> + * not NULL.
> + */
> +static int __always_unused seamcall(u64 fn, u64 rcx, u64 rdx, u64 r8, u64 r9,
> + u64 *seamcall_ret,
> + struct tdx_module_output *out)
> +{
What's the point of a 'static __always_unused' function again? Other
than to test the DCE pass of a linker, that is?
On 11/20/22 16:26, Kai Huang wrote:
> TDX introduces a new CPU mode: Secure Arbitration Mode (SEAM). This
> mode runs only the TDX module itself or other code to load the TDX
> module.
>
> The host kernel communicates with SEAM software via a new SEAMCALL
> instruction. This is conceptually similar to a guest->host hypercall,
> except it is made from the host to SEAM software instead.
>
> The TDX module defines a set of SEAMCALL leaf functions to allow the
> host to initialize it, and to create and run protected VMs. SEAMCALL
> leaf functions use an ABI different from the x86-64 system-v ABI.
> Instead, they share the same ABI with the TDCALL leaf functions.
I may have suggested this along the way, but the mention of the sysv ABI
is just confusing here. This is enough for a changelog:
The TDX module establishes a new SEAMCALL ABI which allows the
host to initialize the module and to and to manage VMs.
Kill the rest.
> Implement a function __seamcall() to allow the host to make SEAMCALL
> to SEAM software using the TDX_MODULE_CALL macro which is the common
> assembly for both SEAMCALL and TDCALL.
In general, I dislike mentioning function names in changelogs. Keep
this high-level, like:
Add infrastructure to make SEAMCALLs. The SEAMCALL ABI is very
similar to the TDCALL ABI and leverages much TDCALL
infrastructure.
> SEAMCALL instruction causes #GP when SEAMRR isn't enabled, and #UD when
> CPU is not in VMX operation. The current TDX_MODULE_CALL macro doesn't
> handle any of them. There's no way to check whether the CPU is in VMX
> operation or not.
What is SEAMRR?
Why even mention this behavior in the changelog. Is this a problem?
Does it have a solution?
> Initializing the TDX module is done at runtime on demand, and it depends
> on the caller to ensure CPU is in VMX operation before making SEAMCALL.
> To avoid getting Oops when the caller mistakenly tries to initialize the
> TDX module when CPU is not in VMX operation, extend the TDX_MODULE_CALL
> macro to handle #UD (and also #GP, which can theoretically still happen
> when TDX isn't actually enabled by the BIOS, i.e. due to BIOS bug).
I'm not completely sure this is worth it. If the BIOS lies, we oops.
There are lots of ways that the BIOS lying can make the kernel oops.
What's one more?
> Introduce two new TDX error codes for #UD and #GP respectively so the
> caller can distinguish. Also, Opportunistically put the new TDX error
> codes and the existing TDX_SEAMCALL_VMFAILINVALID into INTEL_TDX_HOST
> Kconfig option as they are only used when it is on.
>
> As __seamcall() can potentially return multiple error codes, besides the
> actual SEAMCALL leaf function return code, also introduce a wrapper
> function seamcall() to convert the __seamcall() error code to the kernel
> error code, so the caller doesn't need to duplicate the code to check
> return value of __seamcall() and return kernel error code accordingly.
> diff --git a/arch/x86/include/asm/tdx.h b/arch/x86/include/asm/tdx.h
> index 05fc89d9742a..d688228f3151 100644
> --- a/arch/x86/include/asm/tdx.h
> +++ b/arch/x86/include/asm/tdx.h
> @@ -8,6 +8,10 @@
> #include <asm/ptrace.h>
> #include <asm/shared/tdx.h>
>
> +#ifdef CONFIG_INTEL_TDX_HOST
> +
> +#include <asm/trapnr.h>
> +
> /*
> * SW-defined error codes.
> *
> @@ -18,6 +22,11 @@
> #define TDX_SW_ERROR (TDX_ERROR | GENMASK_ULL(47, 40))
> #define TDX_SEAMCALL_VMFAILINVALID (TDX_SW_ERROR | _UL(0xFFFF0000))
>
> +#define TDX_SEAMCALL_GP (TDX_SW_ERROR | X86_TRAP_GP)
> +#define TDX_SEAMCALL_UD (TDX_SW_ERROR | X86_TRAP_UD)
> +
> +#endif
> +
> #ifndef __ASSEMBLY__
>
> /*
> diff --git a/arch/x86/virt/vmx/tdx/Makefile b/arch/x86/virt/vmx/tdx/Makefile
> index 93ca8b73e1f1..38d534f2c113 100644
> --- a/arch/x86/virt/vmx/tdx/Makefile
> +++ b/arch/x86/virt/vmx/tdx/Makefile
> @@ -1,2 +1,2 @@
> # SPDX-License-Identifier: GPL-2.0-only
> -obj-y += tdx.o
> +obj-y += tdx.o seamcall.o
> diff --git a/arch/x86/virt/vmx/tdx/seamcall.S b/arch/x86/virt/vmx/tdx/seamcall.S
> new file mode 100644
> index 000000000000..f81be6b9c133
> --- /dev/null
> +++ b/arch/x86/virt/vmx/tdx/seamcall.S
> @@ -0,0 +1,52 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#include <linux/linkage.h>
> +#include <asm/frame.h>
> +
> +#include "tdxcall.S"
> +
> +/*
> + * __seamcall() - Host-side interface functions to SEAM software module
> + * (the P-SEAMLDR or the TDX module).
> + *
> + * Transform function call register arguments into the SEAMCALL register
> + * ABI. Return TDX_SEAMCALL_VMFAILINVALID if the SEAMCALL itself fails,
> + * or the completion status of the SEAMCALL leaf function. Additional
> + * output operands are saved in @out (if it is provided by the caller).
> + *
> + *-------------------------------------------------------------------------
> + * SEAMCALL ABI:
> + *-------------------------------------------------------------------------
> + * Input Registers:
> + *
> + * RAX - SEAMCALL Leaf number.
> + * RCX,RDX,R8-R9 - SEAMCALL Leaf specific input registers.
> + *
> + * Output Registers:
> + *
> + * RAX - SEAMCALL completion status code.
> + * RCX,RDX,R8-R11 - SEAMCALL Leaf specific output registers.
> + *
> + *-------------------------------------------------------------------------
> + *
> + * __seamcall() function ABI:
> + *
> + * @fn (RDI) - SEAMCALL Leaf number, moved to RAX
> + * @rcx (RSI) - Input parameter 1, moved to RCX
> + * @rdx (RDX) - Input parameter 2, moved to RDX
> + * @r8 (RCX) - Input parameter 3, moved to R8
> + * @r9 (R8) - Input parameter 4, moved to R9
> + *
> + * @out (R9) - struct tdx_module_output pointer
> + * stored temporarily in R12 (not
> + * used by the P-SEAMLDR or the TDX
> + * module). It can be NULL.
> + *
> + * Return (via RAX) the completion status of the SEAMCALL, or
> + * TDX_SEAMCALL_VMFAILINVALID.
> + */
> +SYM_FUNC_START(__seamcall)
> + FRAME_BEGIN
> + TDX_MODULE_CALL host=1
> + FRAME_END
> + RET
> +SYM_FUNC_END(__seamcall)
> diff --git a/arch/x86/virt/vmx/tdx/tdx.c b/arch/x86/virt/vmx/tdx/tdx.c
> index 28c187b8726f..b06c1a2bc9cb 100644
> --- a/arch/x86/virt/vmx/tdx/tdx.c
> +++ b/arch/x86/virt/vmx/tdx/tdx.c
> @@ -124,6 +124,48 @@ bool platform_tdx_enabled(void)
> return !!tdx_keyid_num;
> }
>
> +/*
> + * Wrapper of __seamcall() to convert SEAMCALL leaf function error code
> + * to kernel error code. @seamcall_ret and @out contain the SEAMCALL
> + * leaf function return code and the additional output respectively if
> + * not NULL.
> + */
> +static int __always_unused seamcall(u64 fn, u64 rcx, u64 rdx, u64 r8, u64 r9,
> + u64 *seamcall_ret,
> + struct tdx_module_output *out)
> +{
> + u64 sret;
> +
> + sret = __seamcall(fn, rcx, rdx, r8, r9, out);
> +
> + /* Save SEAMCALL return code if caller wants it */
> + if (seamcall_ret)
> + *seamcall_ret = sret;
> +
> + /* SEAMCALL was successful */
> + if (!sret)
> + return 0;
> +
> + switch (sret) {
> + case TDX_SEAMCALL_GP:
> + /*
> + * platform_tdx_enabled() is checked to be true
> + * before making any SEAMCALL.
> + */
This doesn't make any sense. "platform_tdx_enabled() is checked"???
Do you mean that it *should* be checked and probably wasn't which is
what caused the error?
> + WARN_ON_ONCE(1);
> + fallthrough;
> + case TDX_SEAMCALL_VMFAILINVALID:
> + /* Return -ENODEV if the TDX module is not loaded. */
> + return -ENODEV;
Pro tip: you don't need to rewrite code in comments. If the code
literally says, "return -ENODEV", there is very little value in writing
virtually identical bytes "Return -ENODEV" in the comment.
On Tue, 2022-11-22 at 10:06 +0100, Peter Zijlstra wrote:
> On Mon, Nov 21, 2022 at 01:26:27PM +1300, Kai Huang wrote:
> > +/*
> > + * Wrapper of __seamcall() to convert SEAMCALL leaf function error code
> > + * to kernel error code. @seamcall_ret and @out contain the SEAMCALL
> > + * leaf function return code and the additional output respectively if
> > + * not NULL.
> > + */
> > +static int __always_unused seamcall(u64 fn, u64 rcx, u64 rdx, u64 r8, u64 r9,
> > + u64 *seamcall_ret,
> > + struct tdx_module_output *out)
> > +{
>
> What's the point of a 'static __always_unused' function again? Other
> than to test the DCE pass of a linker, that is?
>
It is used to avoid the compile warning as so far with this patch it doesn't
have any caller. Without the __always_unused, the compiler will complain.
Originally it was in the patch "Shut down TDX module in case of error" where it
was firstly called. Dave suggested to move it out:
https://lore.kernel.org/all/6ed2746d-f44c-4511-7373-5706dd7c3f0f@intel.com/
On Tue, 2022-11-22 at 10:20 -0800, Dave Hansen wrote:
> On 11/20/22 16:26, Kai Huang wrote:
> > TDX introduces a new CPU mode: Secure Arbitration Mode (SEAM). This
> > mode runs only the TDX module itself or other code to load the TDX
> > module.
> >
> > The host kernel communicates with SEAM software via a new SEAMCALL
> > instruction. This is conceptually similar to a guest->host hypercall,
> > except it is made from the host to SEAM software instead.
> >
> > The TDX module defines a set of SEAMCALL leaf functions to allow the
> > host to initialize it, and to create and run protected VMs. SEAMCALL
> > leaf functions use an ABI different from the x86-64 system-v ABI.
> > Instead, they share the same ABI with the TDCALL leaf functions.
>
> I may have suggested this along the way, but the mention of the sysv ABI
> is just confusing here. This is enough for a changelog:
>
> The TDX module establishes a new SEAMCALL ABI which allows the
> host to initialize the module and to and to manage VMs.
>
> Kill the rest.
Thanks will do.
>
> > Implement a function __seamcall() to allow the host to make SEAMCALL
> > to SEAM software using the TDX_MODULE_CALL macro which is the common
> > assembly for both SEAMCALL and TDCALL.
>
> In general, I dislike mentioning function names in changelogs. Keep
> this high-level, like:
>
> Add infrastructure to make SEAMCALLs. The SEAMCALL ABI is very
> similar to the TDCALL ABI and leverages much TDCALL
> infrastructure.
Will do.
>
> > SEAMCALL instruction causes #GP when SEAMRR isn't enabled, and #UD when
> > CPU is not in VMX operation. The current TDX_MODULE_CALL macro doesn't
> > handle any of them. There's no way to check whether the CPU is in VMX
> > operation or not.
>
> What is SEAMRR?
Sorry it is a leftover. Should be "when TDX isn't enabled".
>
> Why even mention this behavior in the changelog. Is this a problem?
> Does it have a solution?
My intention was to provide some background information why to extend
TDX_MODULE_CALL macro to handle #UD and #GP as mentioned below.
>
> > Initializing the TDX module is done at runtime on demand, and it depends
> > on the caller to ensure CPU is in VMX operation before making SEAMCALL.
> > To avoid getting Oops when the caller mistakenly tries to initialize the
> > TDX module when CPU is not in VMX operation, extend the TDX_MODULE_CALL
> > macro to handle #UD (and also #GP, which can theoretically still happen
> > when TDX isn't actually enabled by the BIOS, i.e. due to BIOS bug).
>
> I'm not completely sure this is worth it. If the BIOS lies, we oops.
> There are lots of ways that the BIOS lying can make the kernel oops.
> What's one more?
I agree. But if we want to handle #UD, then #GP won't cause oops any more, so I
just added error code for #GP too.
Or perhaps we can change to below: ?
"... extend the TDX_MODULE_CALL to handle #UD (and opportunistically #GP since
they share the same assembly)."
Or other suggestions?
>
> > Introduce two new TDX error codes for #UD and #GP respectively so the
> > caller can distinguish. Also, Opportunistically put the new TDX error
> > codes and the existing TDX_SEAMCALL_VMFAILINVALID into INTEL_TDX_HOST
> > Kconfig option as they are only used when it is on.
> >
> > As __seamcall() can potentially return multiple error codes, besides the
> > actual SEAMCALL leaf function return code, also introduce a wrapper
> > function seamcall() to convert the __seamcall() error code to the kernel
> > error code, so the caller doesn't need to duplicate the code to check
> > return value of __seamcall() and return kernel error code accordingly.
>
>
[...]
> > +/*
> > + * Wrapper of __seamcall() to convert SEAMCALL leaf function error code
> > + * to kernel error code. @seamcall_ret and @out contain the SEAMCALL
> > + * leaf function return code and the additional output respectively if
> > + * not NULL.
> > + */
> > +static int __always_unused seamcall(u64 fn, u64 rcx, u64 rdx, u64 r8, u64 r9,
> > + u64 *seamcall_ret,
> > + struct tdx_module_output *out)
> > +{
> > + u64 sret;
> > +
> > + sret = __seamcall(fn, rcx, rdx, r8, r9, out);
> > +
> > + /* Save SEAMCALL return code if caller wants it */
> > + if (seamcall_ret)
> > + *seamcall_ret = sret;
> > +
> > + /* SEAMCALL was successful */
> > + if (!sret)
> > + return 0;
> > +
> > + switch (sret) {
> > + case TDX_SEAMCALL_GP:
> > + /*
> > + * platform_tdx_enabled() is checked to be true
> > + * before making any SEAMCALL.
> > + */
>
> This doesn't make any sense. "platform_tdx_enabled() is checked"???
>
> Do you mean that it *should* be checked and probably wasn't which is
> what caused the error?
I meant tdx_enable() already calls platform_tdx_enabled() to check whether BIOS
has enabled TDX at the very beginning before making any SEAMCALL, so
theoretically #GP should not happen unless there's BIOS bug. I thought a WARN()
can help to catch.
>
> > + WARN_ON_ONCE(1);
> > + fallthrough;
> > + case TDX_SEAMCALL_VMFAILINVALID:
> > + /* Return -ENODEV if the TDX module is not loaded. */
> > + return -ENODEV;
>
> Pro tip: you don't need to rewrite code in comments. If the code
> literally says, "return -ENODEV", there is very little value in writing
> virtually identical bytes "Return -ENODEV" in the comment.
>
Indeed. Thanks for the tip! I'll update those comments.
@@ -8,6 +8,10 @@
#include <asm/ptrace.h>
#include <asm/shared/tdx.h>
+#ifdef CONFIG_INTEL_TDX_HOST
+
+#include <asm/trapnr.h>
+
/*
* SW-defined error codes.
*
@@ -18,6 +22,11 @@
#define TDX_SW_ERROR (TDX_ERROR | GENMASK_ULL(47, 40))
#define TDX_SEAMCALL_VMFAILINVALID (TDX_SW_ERROR | _UL(0xFFFF0000))
+#define TDX_SEAMCALL_GP (TDX_SW_ERROR | X86_TRAP_GP)
+#define TDX_SEAMCALL_UD (TDX_SW_ERROR | X86_TRAP_UD)
+
+#endif
+
#ifndef __ASSEMBLY__
/*
@@ -1,2 +1,2 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-y += tdx.o
+obj-y += tdx.o seamcall.o
new file mode 100644
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+#include <asm/frame.h>
+
+#include "tdxcall.S"
+
+/*
+ * __seamcall() - Host-side interface functions to SEAM software module
+ * (the P-SEAMLDR or the TDX module).
+ *
+ * Transform function call register arguments into the SEAMCALL register
+ * ABI. Return TDX_SEAMCALL_VMFAILINVALID if the SEAMCALL itself fails,
+ * or the completion status of the SEAMCALL leaf function. Additional
+ * output operands are saved in @out (if it is provided by the caller).
+ *
+ *-------------------------------------------------------------------------
+ * SEAMCALL ABI:
+ *-------------------------------------------------------------------------
+ * Input Registers:
+ *
+ * RAX - SEAMCALL Leaf number.
+ * RCX,RDX,R8-R9 - SEAMCALL Leaf specific input registers.
+ *
+ * Output Registers:
+ *
+ * RAX - SEAMCALL completion status code.
+ * RCX,RDX,R8-R11 - SEAMCALL Leaf specific output registers.
+ *
+ *-------------------------------------------------------------------------
+ *
+ * __seamcall() function ABI:
+ *
+ * @fn (RDI) - SEAMCALL Leaf number, moved to RAX
+ * @rcx (RSI) - Input parameter 1, moved to RCX
+ * @rdx (RDX) - Input parameter 2, moved to RDX
+ * @r8 (RCX) - Input parameter 3, moved to R8
+ * @r9 (R8) - Input parameter 4, moved to R9
+ *
+ * @out (R9) - struct tdx_module_output pointer
+ * stored temporarily in R12 (not
+ * used by the P-SEAMLDR or the TDX
+ * module). It can be NULL.
+ *
+ * Return (via RAX) the completion status of the SEAMCALL, or
+ * TDX_SEAMCALL_VMFAILINVALID.
+ */
+SYM_FUNC_START(__seamcall)
+ FRAME_BEGIN
+ TDX_MODULE_CALL host=1
+ FRAME_END
+ RET
+SYM_FUNC_END(__seamcall)
@@ -124,6 +124,48 @@ bool platform_tdx_enabled(void)
return !!tdx_keyid_num;
}
+/*
+ * Wrapper of __seamcall() to convert SEAMCALL leaf function error code
+ * to kernel error code. @seamcall_ret and @out contain the SEAMCALL
+ * leaf function return code and the additional output respectively if
+ * not NULL.
+ */
+static int __always_unused seamcall(u64 fn, u64 rcx, u64 rdx, u64 r8, u64 r9,
+ u64 *seamcall_ret,
+ struct tdx_module_output *out)
+{
+ u64 sret;
+
+ sret = __seamcall(fn, rcx, rdx, r8, r9, out);
+
+ /* Save SEAMCALL return code if caller wants it */
+ if (seamcall_ret)
+ *seamcall_ret = sret;
+
+ /* SEAMCALL was successful */
+ if (!sret)
+ return 0;
+
+ switch (sret) {
+ case TDX_SEAMCALL_GP:
+ /*
+ * platform_tdx_enabled() is checked to be true
+ * before making any SEAMCALL.
+ */
+ WARN_ON_ONCE(1);
+ fallthrough;
+ case TDX_SEAMCALL_VMFAILINVALID:
+ /* Return -ENODEV if the TDX module is not loaded. */
+ return -ENODEV;
+ case TDX_SEAMCALL_UD:
+ /* Return -EINVAL if CPU isn't in VMX operation. */
+ return -EINVAL;
+ default:
+ /* Return -EIO if the actual SEAMCALL leaf failed. */
+ return -EIO;
+ }
+}
+
/*
* Detect and initialize the TDX module.
*
@@ -12,4 +12,12 @@
/* MSR to report KeyID partitioning between MKTME and TDX */
#define MSR_IA32_MKTME_KEYID_PARTITIONING 0x00000087
+/*
+ * Do not put any hardware-defined TDX structure representations below
+ * this comment!
+ */
+
+struct tdx_module_output;
+u64 __seamcall(u64 fn, u64 rcx, u64 rdx, u64 r8, u64 r9,
+ struct tdx_module_output *out);
#endif
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 */
#include <asm/asm-offsets.h>
#include <asm/tdx.h>
+#include <asm/asm.h>
/*
* TDCALL and SEAMCALL are supported in Binutils >= 2.36.
@@ -45,6 +46,7 @@
/* Leave input param 2 in RDX */
.if \host
+1:
seamcall
/*
* SEAMCALL instruction is essentially a VMExit from VMX root
@@ -57,10 +59,23 @@
* This value will never be used as actual SEAMCALL error code as
* it is from the Reserved status code class.
*/
- jnc .Lno_vmfailinvalid
+ jnc .Lseamcall_out
mov $TDX_SEAMCALL_VMFAILINVALID, %rax
-.Lno_vmfailinvalid:
+ jmp .Lseamcall_out
+2:
+ /*
+ * SEAMCALL caused #GP or #UD. By reaching here %eax contains
+ * the trap number. Convert the trap number to the TDX error
+ * code by setting TDX_SW_ERROR to the high 32-bits of %rax.
+ *
+ * Note cannot OR TDX_SW_ERROR directly to %rax as OR instruction
+ * only accepts 32-bit immediate at most.
+ */
+ mov $TDX_SW_ERROR, %r12
+ orq %r12, %rax
+ _ASM_EXTABLE_FAULT(1b, 2b)
+.Lseamcall_out:
.else
tdcall
.endif