[v2] drm/msm/dp: correct configure Colorimetry Indicator Field at MISC0

Message ID 1705514068-22394-1-git-send-email-quic_khsieh@quicinc.com
State New
Headers
Series [v2] drm/msm/dp: correct configure Colorimetry Indicator Field at MISC0 |

Commit Message

Kuogee Hsieh Jan. 17, 2024, 5:54 p.m. UTC
  MSA MISC0 bit 1 to 7 contains Colorimetry Indicator Field. At
current implementation, at DP_TEST_DYNAMIC_RANGE_CEA case the
Colorimetry Indicator Field is mistakenly left shifted one extra
bit. This patch return correct value of colorimetry at
dp_link_get_colorimetry_config() to fix this problem.

Changes in V2:
-- drop retrieving colorimetry from colorspace
-- drop dr = link->dp_link.test_video.test_dyn_range assignment

Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
---
 drivers/gpu/drm/msm/dp/dp_link.c | 11 ++++++-----
 drivers/gpu/drm/msm/dp/dp_link.h |  3 +++
 2 files changed, 9 insertions(+), 5 deletions(-)
  

Comments

Dmitry Baryshkov Jan. 17, 2024, 6:12 p.m. UTC | #1
On Wed, 17 Jan 2024 at 19:54, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote:
>
> MSA MISC0 bit 1 to 7 contains Colorimetry Indicator Field. At
> current implementation, at DP_TEST_DYNAMIC_RANGE_CEA case the

In the current implementation, in the ... case

> Colorimetry Indicator Field is mistakenly left shifted one extra
> bit.

This doesn't make sense. You say that the value is mistakenly shifted,
but the shift is still in place in dp_catalog_ctrl_config_misc().

> This patch return correct value of colorimetry at
> dp_link_get_colorimetry_config() to fix this problem.

See Documentation/process/submitting-patches.rst#_describe_changes

>
> Changes in V2:
> -- drop retrieving colorimetry from colorspace
> -- drop dr = link->dp_link.test_video.test_dyn_range assignment
>
> Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>  drivers/gpu/drm/msm/dp/dp_link.c | 11 ++++++-----
>  drivers/gpu/drm/msm/dp/dp_link.h |  3 +++
>  2 files changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
> index 98427d4..2e1bdaf 100644
> --- a/drivers/gpu/drm/msm/dp/dp_link.c
> +++ b/drivers/gpu/drm/msm/dp/dp_link.c
> @@ -1082,7 +1082,7 @@ int dp_link_process_request(struct dp_link *dp_link)
>
>  int dp_link_get_colorimetry_config(struct dp_link *dp_link)
>  {
> -       u32 cc;
> +       u32 cc = DP_MISC0_LEGACY_RGB;
>         struct dp_link_private *link;
>
>         if (!dp_link) {
> @@ -1096,10 +1096,11 @@ int dp_link_get_colorimetry_config(struct dp_link *dp_link)
>          * Unless a video pattern CTS test is ongoing, use RGB_VESA
>          * Only RGB_VESA and RGB_CEA supported for now
>          */
> -       if (dp_link_is_video_pattern_requested(link))
> -               cc = link->dp_link.test_video.test_dyn_range;
> -       else
> -               cc = DP_TEST_DYNAMIC_RANGE_VESA;
> +       if (dp_link_is_video_pattern_requested(link)) {
> +               if (link->dp_link.test_video.test_dyn_range &
> +                                       DP_TEST_DYNAMIC_RANGE_CEA)
> +                       cc = DP_MISC0_CEA_RGB;
> +       }
>
>         return cc;
>  }
> diff --git a/drivers/gpu/drm/msm/dp/dp_link.h b/drivers/gpu/drm/msm/dp/dp_link.h
> index 9dd4dd9..fe8f716 100644
> --- a/drivers/gpu/drm/msm/dp/dp_link.h
> +++ b/drivers/gpu/drm/msm/dp/dp_link.h
> @@ -12,6 +12,9 @@
>  #define DP_TEST_BIT_DEPTH_UNKNOWN 0xFFFFFFFF
>  #define DP_LINK_CAP_ENHANCED_FRAMING (1 << 0)
>
> +#define DP_MISC0_LEGACY_RGB            0
> +#define DP_MISC0_CEA_RGB               0x04

These should go to dp_reg.h and should start with DP_MISC0_COLORIMETRY_CFG

> +
>  struct dp_link_info {
>         unsigned char revision;
>         unsigned int rate;
> --
> 2.7.4
>
  
Kuogee Hsieh Jan. 17, 2024, 6:29 p.m. UTC | #2
On 1/17/2024 10:12 AM, Dmitry Baryshkov wrote:
> On Wed, 17 Jan 2024 at 19:54, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote:
>> MSA MISC0 bit 1 to 7 contains Colorimetry Indicator Field. At
>> current implementation, at DP_TEST_DYNAMIC_RANGE_CEA case the
> In the current implementation, in the ... case
>
>> Colorimetry Indicator Field is mistakenly left shifted one extra
>> bit.
> This doesn't make sense. You say that the value is mistakenly shifted,
> but the shift is still in place in dp_catalog_ctrl_config_misc().

The problem is at

  link->dp_link.test_video.test_dyn_range =   (bp & 
DP_TEST_DYNAMIC_RANGE_CEA);   <== this from reading dpcd directly where 
==> DP_TEST_DYNAMIC_RANGE_CEA  is   (1 << 3)

within dp_catalog_ctrl_config_misc(), cc will be left shift one more bit.
so that cc is totally is left shifted 4 bits (bit 4).

at misc0, it should be bit 3 set only for CEA_RGB.

>
>> This patch return correct value of colorimetry at
>> dp_link_get_colorimetry_config() to fix this problem.
> See Documentation/process/submitting-patches.rst#_describe_changes
>
>> Changes in V2:
>> -- drop retrieving colorimetry from colorspace
>> -- drop dr = link->dp_link.test_video.test_dyn_range assignment
>>
>> Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
>> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
>> ---
>>   drivers/gpu/drm/msm/dp/dp_link.c | 11 ++++++-----
>>   drivers/gpu/drm/msm/dp/dp_link.h |  3 +++
>>   2 files changed, 9 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
>> index 98427d4..2e1bdaf 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_link.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_link.c
>> @@ -1082,7 +1082,7 @@ int dp_link_process_request(struct dp_link *dp_link)
>>
>>   int dp_link_get_colorimetry_config(struct dp_link *dp_link)
>>   {
>> -       u32 cc;
>> +       u32 cc = DP_MISC0_LEGACY_RGB;
>>          struct dp_link_private *link;
>>
>>          if (!dp_link) {
>> @@ -1096,10 +1096,11 @@ int dp_link_get_colorimetry_config(struct dp_link *dp_link)
>>           * Unless a video pattern CTS test is ongoing, use RGB_VESA
>>           * Only RGB_VESA and RGB_CEA supported for now
>>           */
>> -       if (dp_link_is_video_pattern_requested(link))
>> -               cc = link->dp_link.test_video.test_dyn_range;
>> -       else
>> -               cc = DP_TEST_DYNAMIC_RANGE_VESA;
>> +       if (dp_link_is_video_pattern_requested(link)) {
>> +               if (link->dp_link.test_video.test_dyn_range &
>> +                                       DP_TEST_DYNAMIC_RANGE_CEA)
>> +                       cc = DP_MISC0_CEA_RGB;
>> +       }
>>
>>          return cc;
>>   }
>> diff --git a/drivers/gpu/drm/msm/dp/dp_link.h b/drivers/gpu/drm/msm/dp/dp_link.h
>> index 9dd4dd9..fe8f716 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_link.h
>> +++ b/drivers/gpu/drm/msm/dp/dp_link.h
>> @@ -12,6 +12,9 @@
>>   #define DP_TEST_BIT_DEPTH_UNKNOWN 0xFFFFFFFF
>>   #define DP_LINK_CAP_ENHANCED_FRAMING (1 << 0)
>>
>> +#define DP_MISC0_LEGACY_RGB            0
>> +#define DP_MISC0_CEA_RGB               0x04
> These should go to dp_reg.h and should start with DP_MISC0_COLORIMETRY_CFG
>
>> +
>>   struct dp_link_info {
>>          unsigned char revision;
>>          unsigned int rate;
>> --
>> 2.7.4
>>
>
  
Dmitry Baryshkov Jan. 17, 2024, 6:40 p.m. UTC | #3
On Wed, 17 Jan 2024 at 20:29, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote:
>
>
> On 1/17/2024 10:12 AM, Dmitry Baryshkov wrote:
> > On Wed, 17 Jan 2024 at 19:54, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote:
> >> MSA MISC0 bit 1 to 7 contains Colorimetry Indicator Field. At
> >> current implementation, at DP_TEST_DYNAMIC_RANGE_CEA case the
> > In the current implementation, in the ... case
> >
> >> Colorimetry Indicator Field is mistakenly left shifted one extra
> >> bit.
> > This doesn't make sense. You say that the value is mistakenly shifted,
> > but the shift is still in place in dp_catalog_ctrl_config_misc().
>
> The problem is at
>
>   link->dp_link.test_video.test_dyn_range =   (bp &
> DP_TEST_DYNAMIC_RANGE_CEA);   <== this from reading dpcd directly where
> ==> DP_TEST_DYNAMIC_RANGE_CEA  is   (1 << 3)
>
> within dp_catalog_ctrl_config_misc(), cc will be left shift one more bit.
> so that cc is totally is left shifted 4 bits (bit 4).
>
> at misc0, it should be bit 3 set only for CEA_RGB.

Yes. But your patch doesn't fix the shift (which is correct). You
patch fixes the value being written to that field.

>
> >
> >> This patch return correct value of colorimetry at
> >> dp_link_get_colorimetry_config() to fix this problem.
> > See Documentation/process/submitting-patches.rst#_describe_changes
> >
> >> Changes in V2:
> >> -- drop retrieving colorimetry from colorspace
> >> -- drop dr = link->dp_link.test_video.test_dyn_range assignment
> >>
> >> Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
> >> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> >> ---
> >>   drivers/gpu/drm/msm/dp/dp_link.c | 11 ++++++-----
> >>   drivers/gpu/drm/msm/dp/dp_link.h |  3 +++
> >>   2 files changed, 9 insertions(+), 5 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
> >> index 98427d4..2e1bdaf 100644
> >> --- a/drivers/gpu/drm/msm/dp/dp_link.c
> >> +++ b/drivers/gpu/drm/msm/dp/dp_link.c
> >> @@ -1082,7 +1082,7 @@ int dp_link_process_request(struct dp_link *dp_link)
> >>
> >>   int dp_link_get_colorimetry_config(struct dp_link *dp_link)
> >>   {
> >> -       u32 cc;
> >> +       u32 cc = DP_MISC0_LEGACY_RGB;
> >>          struct dp_link_private *link;
> >>
> >>          if (!dp_link) {
> >> @@ -1096,10 +1096,11 @@ int dp_link_get_colorimetry_config(struct dp_link *dp_link)
> >>           * Unless a video pattern CTS test is ongoing, use RGB_VESA
> >>           * Only RGB_VESA and RGB_CEA supported for now
> >>           */
> >> -       if (dp_link_is_video_pattern_requested(link))
> >> -               cc = link->dp_link.test_video.test_dyn_range;
> >> -       else
> >> -               cc = DP_TEST_DYNAMIC_RANGE_VESA;
> >> +       if (dp_link_is_video_pattern_requested(link)) {
> >> +               if (link->dp_link.test_video.test_dyn_range &
> >> +                                       DP_TEST_DYNAMIC_RANGE_CEA)
> >> +                       cc = DP_MISC0_CEA_RGB;
> >> +       }
> >>
> >>          return cc;
> >>   }
> >> diff --git a/drivers/gpu/drm/msm/dp/dp_link.h b/drivers/gpu/drm/msm/dp/dp_link.h
> >> index 9dd4dd9..fe8f716 100644
> >> --- a/drivers/gpu/drm/msm/dp/dp_link.h
> >> +++ b/drivers/gpu/drm/msm/dp/dp_link.h
> >> @@ -12,6 +12,9 @@
> >>   #define DP_TEST_BIT_DEPTH_UNKNOWN 0xFFFFFFFF
> >>   #define DP_LINK_CAP_ENHANCED_FRAMING (1 << 0)
> >>
> >> +#define DP_MISC0_LEGACY_RGB            0
> >> +#define DP_MISC0_CEA_RGB               0x04
> > These should go to dp_reg.h and should start with DP_MISC0_COLORIMETRY_CFG
> >
> >> +
> >>   struct dp_link_info {
> >>          unsigned char revision;
> >>          unsigned int rate;
> >> --
> >> 2.7.4
> >>
> >
  
Kuogee Hsieh Jan. 17, 2024, 6:46 p.m. UTC | #4
On 1/17/2024 10:40 AM, Dmitry Baryshkov wrote:
> On Wed, 17 Jan 2024 at 20:29, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote:
>>
>> On 1/17/2024 10:12 AM, Dmitry Baryshkov wrote:
>>> On Wed, 17 Jan 2024 at 19:54, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote:
>>>> MSA MISC0 bit 1 to 7 contains Colorimetry Indicator Field. At
>>>> current implementation, at DP_TEST_DYNAMIC_RANGE_CEA case the
>>> In the current implementation, in the ... case
>>>
>>>> Colorimetry Indicator Field is mistakenly left shifted one extra
>>>> bit.
>>> This doesn't make sense. You say that the value is mistakenly shifted,
>>> but the shift is still in place in dp_catalog_ctrl_config_misc().
>> The problem is at
>>
>>    link->dp_link.test_video.test_dyn_range =   (bp &
>> DP_TEST_DYNAMIC_RANGE_CEA);   <== this from reading dpcd directly where
>> ==> DP_TEST_DYNAMIC_RANGE_CEA  is   (1 << 3)
>>
>> within dp_catalog_ctrl_config_misc(), cc will be left shift one more bit.
>> so that cc is totally is left shifted 4 bits (bit 4).
>>
>> at misc0, it should be bit 3 set only for CEA_RGB.
> Yes. But your patch doesn't fix the shift (which is correct). You
> patch fixes the value being written to that field.
ok, i will rewording the commit test
>
>>>> This patch return correct value of colorimetry at
>>>> dp_link_get_colorimetry_config() to fix this problem.
>>> See Documentation/process/submitting-patches.rst#_describe_changes
>>>
>>>> Changes in V2:
>>>> -- drop retrieving colorimetry from colorspace
>>>> -- drop dr = link->dp_link.test_video.test_dyn_range assignment
>>>>
>>>> Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
>>>> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
>>>> ---
>>>>    drivers/gpu/drm/msm/dp/dp_link.c | 11 ++++++-----
>>>>    drivers/gpu/drm/msm/dp/dp_link.h |  3 +++
>>>>    2 files changed, 9 insertions(+), 5 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
>>>> index 98427d4..2e1bdaf 100644
>>>> --- a/drivers/gpu/drm/msm/dp/dp_link.c
>>>> +++ b/drivers/gpu/drm/msm/dp/dp_link.c
>>>> @@ -1082,7 +1082,7 @@ int dp_link_process_request(struct dp_link *dp_link)
>>>>
>>>>    int dp_link_get_colorimetry_config(struct dp_link *dp_link)
>>>>    {
>>>> -       u32 cc;
>>>> +       u32 cc = DP_MISC0_LEGACY_RGB;
>>>>           struct dp_link_private *link;
>>>>
>>>>           if (!dp_link) {
>>>> @@ -1096,10 +1096,11 @@ int dp_link_get_colorimetry_config(struct dp_link *dp_link)
>>>>            * Unless a video pattern CTS test is ongoing, use RGB_VESA
>>>>            * Only RGB_VESA and RGB_CEA supported for now
>>>>            */
>>>> -       if (dp_link_is_video_pattern_requested(link))
>>>> -               cc = link->dp_link.test_video.test_dyn_range;
>>>> -       else
>>>> -               cc = DP_TEST_DYNAMIC_RANGE_VESA;
>>>> +       if (dp_link_is_video_pattern_requested(link)) {
>>>> +               if (link->dp_link.test_video.test_dyn_range &
>>>> +                                       DP_TEST_DYNAMIC_RANGE_CEA)
>>>> +                       cc = DP_MISC0_CEA_RGB;
>>>> +       }
>>>>
>>>>           return cc;
>>>>    }
>>>> diff --git a/drivers/gpu/drm/msm/dp/dp_link.h b/drivers/gpu/drm/msm/dp/dp_link.h
>>>> index 9dd4dd9..fe8f716 100644
>>>> --- a/drivers/gpu/drm/msm/dp/dp_link.h
>>>> +++ b/drivers/gpu/drm/msm/dp/dp_link.h
>>>> @@ -12,6 +12,9 @@
>>>>    #define DP_TEST_BIT_DEPTH_UNKNOWN 0xFFFFFFFF
>>>>    #define DP_LINK_CAP_ENHANCED_FRAMING (1 << 0)
>>>>
>>>> +#define DP_MISC0_LEGACY_RGB            0
>>>> +#define DP_MISC0_CEA_RGB               0x04
>>> These should go to dp_reg.h and should start with DP_MISC0_COLORIMETRY_CFG
>>>
>>>> +
>>>>    struct dp_link_info {
>>>>           unsigned char revision;
>>>>           unsigned int rate;
>>>> --
>>>> 2.7.4
>>>>
>
>
  

Patch

diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
index 98427d4..2e1bdaf 100644
--- a/drivers/gpu/drm/msm/dp/dp_link.c
+++ b/drivers/gpu/drm/msm/dp/dp_link.c
@@ -1082,7 +1082,7 @@  int dp_link_process_request(struct dp_link *dp_link)
 
 int dp_link_get_colorimetry_config(struct dp_link *dp_link)
 {
-	u32 cc;
+	u32 cc = DP_MISC0_LEGACY_RGB;
 	struct dp_link_private *link;
 
 	if (!dp_link) {
@@ -1096,10 +1096,11 @@  int dp_link_get_colorimetry_config(struct dp_link *dp_link)
 	 * Unless a video pattern CTS test is ongoing, use RGB_VESA
 	 * Only RGB_VESA and RGB_CEA supported for now
 	 */
-	if (dp_link_is_video_pattern_requested(link))
-		cc = link->dp_link.test_video.test_dyn_range;
-	else
-		cc = DP_TEST_DYNAMIC_RANGE_VESA;
+	if (dp_link_is_video_pattern_requested(link)) {
+		if (link->dp_link.test_video.test_dyn_range &
+					DP_TEST_DYNAMIC_RANGE_CEA)
+			cc = DP_MISC0_CEA_RGB;
+	}
 
 	return cc;
 }
diff --git a/drivers/gpu/drm/msm/dp/dp_link.h b/drivers/gpu/drm/msm/dp/dp_link.h
index 9dd4dd9..fe8f716 100644
--- a/drivers/gpu/drm/msm/dp/dp_link.h
+++ b/drivers/gpu/drm/msm/dp/dp_link.h
@@ -12,6 +12,9 @@ 
 #define DP_TEST_BIT_DEPTH_UNKNOWN 0xFFFFFFFF
 #define DP_LINK_CAP_ENHANCED_FRAMING (1 << 0)
 
+#define DP_MISC0_LEGACY_RGB		0
+#define DP_MISC0_CEA_RGB		0x04
+
 struct dp_link_info {
 	unsigned char revision;
 	unsigned int rate;