[v9,2/6] remoteproc: pru: Add APIs to get and put the PRU cores
Commit Message
From: Tero Kristo <t-kristo@ti.com>
Add two new APIs, pru_rproc_get() and pru_rproc_put(), to the PRU
driver to allow client drivers to acquire and release the remoteproc
device associated with a PRU core. The PRU cores are treated as
resources with only one client owning it at a time.
The pru_rproc_get() function returns the rproc handle corresponding
to a PRU core identified by the device tree "ti,prus" property under
the client node. The pru_rproc_put() is the complementary function
to pru_rproc_get().
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
drivers/remoteproc/pru_rproc.c | 134 ++++++++++++++++++++++++++++++++-
include/linux/pruss.h | 47 ++++++++++++
2 files changed, 179 insertions(+), 2 deletions(-)
create mode 100644 include/linux/pruss.h
Comments
On Fri, Nov 18, 2022 at 04:49:20PM +0530, MD Danish Anwar wrote:
> From: Tero Kristo <t-kristo@ti.com>
>
> Add two new APIs, pru_rproc_get() and pru_rproc_put(), to the PRU
> driver to allow client drivers to acquire and release the remoteproc
> device associated with a PRU core. The PRU cores are treated as
> resources with only one client owning it at a time.
>
> The pru_rproc_get() function returns the rproc handle corresponding
> to a PRU core identified by the device tree "ti,prus" property under
> the client node. The pru_rproc_put() is the complementary function
> to pru_rproc_get().
>
> Signed-off-by: Suman Anna <s-anna@ti.com>
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
> Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
> ---
> drivers/remoteproc/pru_rproc.c | 134 ++++++++++++++++++++++++++++++++-
> include/linux/pruss.h | 47 ++++++++++++
> 2 files changed, 179 insertions(+), 2 deletions(-)
> create mode 100644 include/linux/pruss.h
>
> diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
> index 128bf9912f2c..4769ade9c316 100644
> --- a/drivers/remoteproc/pru_rproc.c
> +++ b/drivers/remoteproc/pru_rproc.c
> @@ -2,12 +2,14 @@
> /*
> * PRU-ICSS remoteproc driver for various TI SoCs
> *
> - * Copyright (C) 2014-2020 Texas Instruments Incorporated - https://www.ti.com/
> + * Copyright (C) 2014-2022 Texas Instruments Incorporated - https://www.ti.com/
> *
> * Author(s):
> * Suman Anna <s-anna@ti.com>
> * Andrew F. Davis <afd@ti.com>
> * Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> for Texas Instruments
> + * Puranjay Mohan <p-mohan@ti.com>
> + * Md Danish Anwar <danishanwar@ti.com>
> */
>
> #include <linux/bitops.h>
> @@ -16,6 +18,7 @@
> #include <linux/module.h>
> #include <linux/of_device.h>
> #include <linux/of_irq.h>
> +#include <linux/pruss.h>
> #include <linux/pruss_driver.h>
> #include <linux/remoteproc.h>
>
> @@ -111,6 +114,8 @@ struct pru_private_data {
> * @rproc: remoteproc pointer for this PRU core
> * @data: PRU core specific data
> * @mem_regions: data for each of the PRU memory regions
> + * @client_np: client device node
> + * @lock: mutex to protect client usage
> * @fw_name: name of firmware image used during loading
> * @mapped_irq: virtual interrupt numbers of created fw specific mapping
> * @pru_interrupt_map: pointer to interrupt mapping description (firmware)
> @@ -126,6 +131,8 @@ struct pru_rproc {
> struct rproc *rproc;
> const struct pru_private_data *data;
> struct pruss_mem_region mem_regions[PRU_IOMEM_MAX];
> + struct device_node *client_np;
> + struct mutex lock;
> const char *fw_name;
> unsigned int *mapped_irq;
> struct pru_irq_rsc *pru_interrupt_map;
> @@ -146,6 +153,125 @@ void pru_control_write_reg(struct pru_rproc *pru, unsigned int reg, u32 val)
> writel_relaxed(val, pru->mem_regions[PRU_IOMEM_CTRL].va + reg);
> }
>
> +static struct rproc *__pru_rproc_get(struct device_node *np, int index)
> +{
> + struct rproc *rproc;
> + phandle rproc_phandle;
> + int ret;
> +
> + ret = of_property_read_u32_index(np, "ti,prus", index, &rproc_phandle);
> + if (ret)
> + return ERR_PTR(ret);
> +
> + rproc = rproc_get_by_phandle(rproc_phandle);
> + if (!rproc) {
> + ret = -EPROBE_DEFER;
> + goto err_no_rproc_handle;
> + }
> +
> + /* make sure it is PRU rproc */
> + if (!is_pru_rproc(rproc->dev.parent)) {
> + rproc_put(rproc);
> + return ERR_PTR(-ENODEV);
> + }
> +
> + return rproc;
> +
> +err_no_rproc_handle:
> + rproc_put(rproc);
> + return ERR_PTR(ret);
> +}
> +
> +/**
> + * pru_rproc_get() - get the PRU rproc instance from a device node
> + * @np: the user/client device node
> + * @index: index to use for the ti,prus property
> + * @pru_id: optional pointer to return the PRU remoteproc processor id
> + *
> + * This function looks through a client device node's "ti,prus" property at
> + * index @index and returns the rproc handle for a valid PRU remote processor if
> + * found. The function allows only one user to own the PRU rproc resource at a
> + * time. Caller must call pru_rproc_put() when done with using the rproc, not
> + * required if the function returns a failure.
> + *
> + * When optional @pru_id pointer is passed the PRU remoteproc processor id is
> + * returned.
> + *
> + * Return: rproc handle on success, and an ERR_PTR on failure using one
> + * of the following error values
> + * -ENODEV if device is not found
> + * -EBUSY if PRU is already acquired by anyone
> + * -EPROBE_DEFER is PRU device is not probed yet
> + */
> +struct rproc *pru_rproc_get(struct device_node *np, int index,
> + enum pruss_pru_id *pru_id)
> +{
> + struct rproc *rproc;
> + struct pru_rproc *pru;
> + struct device *dev;
> + int ret;
> +
> + rproc = __pru_rproc_get(np, index);
> + if (IS_ERR(rproc))
> + return rproc;
> +
> + pru = rproc->priv;
> + dev = &rproc->dev;
> +
> + mutex_lock(&pru->lock);
> +
> + if (pru->client_np) {
> + mutex_unlock(&pru->lock);
> + put_device(dev);
> + ret = -EBUSY;
> + goto err_no_rproc_handle;
> + }
> +
> + pru->client_np = np;
> +
> + mutex_unlock(&pru->lock);
> +
> + if (pru_id)
> + *pru_id = pru->id;
> +
> + return rproc;
> +
> +err_no_rproc_handle:
> + rproc_put(rproc);
> + return ERR_PTR(ret);
> +}
> +EXPORT_SYMBOL_GPL(pru_rproc_get);
> +
> +/**
> + * pru_rproc_put() - release the PRU rproc resource
> + * @rproc: the rproc resource to release
> + *
> + * Releases the PRU rproc resource and makes it available to other
> + * users.
> + */
> +void pru_rproc_put(struct rproc *rproc)
> +{
> + struct pru_rproc *pru;
> +
> + if (IS_ERR_OR_NULL(rproc) || !is_pru_rproc(rproc->dev.parent))
> + return;
> +
> + pru = rproc->priv;
> +
> + mutex_lock(&pru->lock);
> +
> + if (!pru->client_np) {
> + mutex_unlock(&pru->lock);
> + return;
> + }
> +
> + pru->client_np = NULL;
> + mutex_unlock(&pru->lock);
> +
> + rproc_put(rproc);
> +}
> +EXPORT_SYMBOL_GPL(pru_rproc_put);
> +
> static inline u32 pru_debug_read_reg(struct pru_rproc *pru, unsigned int reg)
> {
> return readl_relaxed(pru->mem_regions[PRU_IOMEM_DEBUG].va + reg);
> @@ -816,6 +942,8 @@ static int pru_rproc_probe(struct platform_device *pdev)
> pru->pruss = platform_get_drvdata(ppdev);
> pru->rproc = rproc;
> pru->fw_name = fw_name;
> + pru->client_np = NULL;
> + mutex_init(&pru->lock);
>
> for (i = 0; i < ARRAY_SIZE(mem_names); i++) {
> res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> @@ -904,7 +1032,7 @@ MODULE_DEVICE_TABLE(of, pru_rproc_match);
>
> static struct platform_driver pru_rproc_driver = {
> .driver = {
> - .name = "pru-rproc",
> + .name = PRU_RPROC_DRVNAME,
> .of_match_table = pru_rproc_match,
> .suppress_bind_attrs = true,
> },
> @@ -916,5 +1044,7 @@ module_platform_driver(pru_rproc_driver);
> MODULE_AUTHOR("Suman Anna <s-anna@ti.com>");
> MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
> MODULE_AUTHOR("Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>");
> +MODULE_AUTHOR("Puranjay Mohan <p-mohan@ti.com>");
> +MODULE_AUTHOR("Md Danish Anwar <danishanwar@ti.com>");
> MODULE_DESCRIPTION("PRU-ICSS Remote Processor Driver");
> MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/pruss.h b/include/linux/pruss.h
> new file mode 100644
> index 000000000000..4909226f14a9
> --- /dev/null
> +++ b/include/linux/pruss.h
> @@ -0,0 +1,47 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/**
> + * PRU-ICSS Subsystem user interfaces
> + *
> + * Copyright (C) 2015-2022 Texas Instruments Incorporated - http://www.ti.com
> + * Suman Anna <s-anna@ti.com>
> + */
> +
> +#ifndef __LINUX_PRUSS_H
> +#define __LINUX_PRUSS_H
> +
> +#include <linux/device.h>
> +#include <linux/types.h>
> +
> +#define PRU_RPROC_DRVNAME "pru-rproc"
> +
> +struct device_node;
> +
> +#if IS_ENABLED(CONFIG_PRU_REMOTEPROC)
> +
> +struct rproc *pru_rproc_get(struct device_node *np, int index,
> + enum pruss_pru_id *pru_id);
Did you really send me code that doesn't compile? It sure looks that way...
CC drivers/remoteproc/pru_rproc.o
In file included from /home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c:21:
/home/mpoirier/work/remoteproc/kernel-review/include/linux/pruss.h:22:13: warning: ‘enum pruss_pru_id’ declared inside parameter list will not be visible outside of this definition or declaration
22 | enum pruss_pru_id *pru_id);
| ^~~~~~~~~~~~
/home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c:207:13: warning: ‘enum pruss_pru_id’ declared inside parameter list will not be visible outside of this definition or declaration
207 | enum pruss_pru_id *pru_id)
| ^~~~~~~~~~~~
/home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c:206:15: error: conflicting types for ‘pru_rproc_get’
206 | struct rproc *pru_rproc_get(struct device_node *np, int index,
| ^~~~~~~~~~~~~
In file included from /home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c:21:
/home/mpoirier/work/remoteproc/kernel-review/include/linux/pruss.h:21:15: note: previous declaration of ‘pru_rproc_get’ was here
21 | struct rproc *pru_rproc_get(struct device_node *np, int index,
| ^~~~~~~~~~~~~
/home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c: In function ‘pru_rproc_get’:
/home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c:235:3: error: dereferencing pointer to incomplete type ‘enum pruss_pru_id’
235 | *pru_id = pru->id;
| ^~~~~~~
In file included from /home/mpoirier/work/remoteproc/kernel-review/include/linux/linkage.h:7,
from /home/mpoirier/work/remoteproc/kernel-review/include/linux/fs.h:5,
from /home/mpoirier/work/remoteproc/kernel-review/include/linux/debugfs.h:15,
from /home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c:16:
/home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c: At top level:
/home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c:243:19: error: conflicting types for ‘pru_rproc_get’
243 | EXPORT_SYMBOL_GPL(pru_rproc_get);
> +void pru_rproc_put(struct rproc *rproc);
> +
> +#else
> +
> +static inline struct rproc *
> +pru_rproc_get(struct device_node *np, int index, enum pruss_pru_id *pru_id)
> +{
> + return ERR_PTR(-EOPNOTSUPP);
> +}
> +
> +static inline void pru_rproc_put(struct rproc *rproc) { }
> +
> +#endif /* CONFIG_PRU_REMOTEPROC */
> +
> +static inline bool is_pru_rproc(struct device *dev)
> +{
> + const char *drv_name = dev_driver_string(dev);
> +
> + if (strncmp(drv_name, PRU_RPROC_DRVNAME, sizeof(PRU_RPROC_DRVNAME)))
> + return false;
> +
> + return true;
> +}
> +
> +#endif /* __LINUX_PRUSS_H */
> --
> 2.25.1
>
Hi Mathieu,
On 21/11/22 23:19, Mathieu Poirier wrote:
> On Fri, Nov 18, 2022 at 04:49:20PM +0530, MD Danish Anwar wrote:
>> From: Tero Kristo <t-kristo@ti.com>
>>
>> Add two new APIs, pru_rproc_get() and pru_rproc_put(), to the PRU
>> driver to allow client drivers to acquire and release the remoteproc
>> device associated with a PRU core. The PRU cores are treated as
>> resources with only one client owning it at a time.
>>
>> The pru_rproc_get() function returns the rproc handle corresponding
>> to a PRU core identified by the device tree "ti,prus" property under
>> the client node. The pru_rproc_put() is the complementary function
>> to pru_rproc_get().
>>
>> Signed-off-by: Suman Anna <s-anna@ti.com>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
>> Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
>> ---
>> drivers/remoteproc/pru_rproc.c | 134 ++++++++++++++++++++++++++++++++-
>> include/linux/pruss.h | 47 ++++++++++++
>> 2 files changed, 179 insertions(+), 2 deletions(-)
>> create mode 100644 include/linux/pruss.h
>>
>> diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
>> index 128bf9912f2c..4769ade9c316 100644
>> --- a/drivers/remoteproc/pru_rproc.c
>> +++ b/drivers/remoteproc/pru_rproc.c
>> @@ -2,12 +2,14 @@
>> /*
>> * PRU-ICSS remoteproc driver for various TI SoCs
>> *
>> - * Copyright (C) 2014-2020 Texas Instruments Incorporated - https://www.ti.com/
>> + * Copyright (C) 2014-2022 Texas Instruments Incorporated - https://www.ti.com/
>> *
>> * Author(s):
>> * Suman Anna <s-anna@ti.com>
>> * Andrew F. Davis <afd@ti.com>
>> * Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> for Texas Instruments
>> + * Puranjay Mohan <p-mohan@ti.com>
>> + * Md Danish Anwar <danishanwar@ti.com>
>> */
>>
>> #include <linux/bitops.h>
>> @@ -16,6 +18,7 @@
>> #include <linux/module.h>
>> #include <linux/of_device.h>
>> #include <linux/of_irq.h>
>> +#include <linux/pruss.h>
>> #include <linux/pruss_driver.h>
>> #include <linux/remoteproc.h>
>>
>> @@ -111,6 +114,8 @@ struct pru_private_data {
>> * @rproc: remoteproc pointer for this PRU core
>> * @data: PRU core specific data
>> * @mem_regions: data for each of the PRU memory regions
>> + * @client_np: client device node
>> + * @lock: mutex to protect client usage
>> * @fw_name: name of firmware image used during loading
>> * @mapped_irq: virtual interrupt numbers of created fw specific mapping
>> * @pru_interrupt_map: pointer to interrupt mapping description (firmware)
>> @@ -126,6 +131,8 @@ struct pru_rproc {
>> struct rproc *rproc;
>> const struct pru_private_data *data;
>> struct pruss_mem_region mem_regions[PRU_IOMEM_MAX];
>> + struct device_node *client_np;
>> + struct mutex lock;
>> const char *fw_name;
>> unsigned int *mapped_irq;
>> struct pru_irq_rsc *pru_interrupt_map;
>> @@ -146,6 +153,125 @@ void pru_control_write_reg(struct pru_rproc *pru, unsigned int reg, u32 val)
>> writel_relaxed(val, pru->mem_regions[PRU_IOMEM_CTRL].va + reg);
>> }
>>
>> +static struct rproc *__pru_rproc_get(struct device_node *np, int index)
>> +{
>> + struct rproc *rproc;
>> + phandle rproc_phandle;
>> + int ret;
>> +
>> + ret = of_property_read_u32_index(np, "ti,prus", index, &rproc_phandle);
>> + if (ret)
>> + return ERR_PTR(ret);
>> +
>> + rproc = rproc_get_by_phandle(rproc_phandle);
>> + if (!rproc) {
>> + ret = -EPROBE_DEFER;
>> + goto err_no_rproc_handle;
>> + }
>> +
>> + /* make sure it is PRU rproc */
>> + if (!is_pru_rproc(rproc->dev.parent)) {
>> + rproc_put(rproc);
>> + return ERR_PTR(-ENODEV);
>> + }
>> +
>> + return rproc;
>> +
>> +err_no_rproc_handle:
>> + rproc_put(rproc);
>> + return ERR_PTR(ret);
>> +}
>> +
>> +/**
>> + * pru_rproc_get() - get the PRU rproc instance from a device node
>> + * @np: the user/client device node
>> + * @index: index to use for the ti,prus property
>> + * @pru_id: optional pointer to return the PRU remoteproc processor id
>> + *
>> + * This function looks through a client device node's "ti,prus" property at
>> + * index @index and returns the rproc handle for a valid PRU remote processor if
>> + * found. The function allows only one user to own the PRU rproc resource at a
>> + * time. Caller must call pru_rproc_put() when done with using the rproc, not
>> + * required if the function returns a failure.
>> + *
>> + * When optional @pru_id pointer is passed the PRU remoteproc processor id is
>> + * returned.
>> + *
>> + * Return: rproc handle on success, and an ERR_PTR on failure using one
>> + * of the following error values
>> + * -ENODEV if device is not found
>> + * -EBUSY if PRU is already acquired by anyone
>> + * -EPROBE_DEFER is PRU device is not probed yet
>> + */
>> +struct rproc *pru_rproc_get(struct device_node *np, int index,
>> + enum pruss_pru_id *pru_id)
>> +{
>> + struct rproc *rproc;
>> + struct pru_rproc *pru;
>> + struct device *dev;
>> + int ret;
>> +
>> + rproc = __pru_rproc_get(np, index);
>> + if (IS_ERR(rproc))
>> + return rproc;
>> +
>> + pru = rproc->priv;
>> + dev = &rproc->dev;
>> +
>> + mutex_lock(&pru->lock);
>> +
>> + if (pru->client_np) {
>> + mutex_unlock(&pru->lock);
>> + put_device(dev);
>> + ret = -EBUSY;
>> + goto err_no_rproc_handle;
>> + }
>> +
>> + pru->client_np = np;
>> +
>> + mutex_unlock(&pru->lock);
>> +
>> + if (pru_id)
>> + *pru_id = pru->id;
>> +
>> + return rproc;
>> +
>> +err_no_rproc_handle:
>> + rproc_put(rproc);
>> + return ERR_PTR(ret);
>> +}
>> +EXPORT_SYMBOL_GPL(pru_rproc_get);
>> +
>> +/**
>> + * pru_rproc_put() - release the PRU rproc resource
>> + * @rproc: the rproc resource to release
>> + *
>> + * Releases the PRU rproc resource and makes it available to other
>> + * users.
>> + */
>> +void pru_rproc_put(struct rproc *rproc)
>> +{
>> + struct pru_rproc *pru;
>> +
>> + if (IS_ERR_OR_NULL(rproc) || !is_pru_rproc(rproc->dev.parent))
>> + return;
>> +
>> + pru = rproc->priv;
>> +
>> + mutex_lock(&pru->lock);
>> +
>> + if (!pru->client_np) {
>> + mutex_unlock(&pru->lock);
>> + return;
>> + }
>> +
>> + pru->client_np = NULL;
>> + mutex_unlock(&pru->lock);
>> +
>> + rproc_put(rproc);
>> +}
>> +EXPORT_SYMBOL_GPL(pru_rproc_put);
>> +
>> static inline u32 pru_debug_read_reg(struct pru_rproc *pru, unsigned int reg)
>> {
>> return readl_relaxed(pru->mem_regions[PRU_IOMEM_DEBUG].va + reg);
>> @@ -816,6 +942,8 @@ static int pru_rproc_probe(struct platform_device *pdev)
>> pru->pruss = platform_get_drvdata(ppdev);
>> pru->rproc = rproc;
>> pru->fw_name = fw_name;
>> + pru->client_np = NULL;
>> + mutex_init(&pru->lock);
>>
>> for (i = 0; i < ARRAY_SIZE(mem_names); i++) {
>> res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
>> @@ -904,7 +1032,7 @@ MODULE_DEVICE_TABLE(of, pru_rproc_match);
>>
>> static struct platform_driver pru_rproc_driver = {
>> .driver = {
>> - .name = "pru-rproc",
>> + .name = PRU_RPROC_DRVNAME,
>> .of_match_table = pru_rproc_match,
>> .suppress_bind_attrs = true,
>> },
>> @@ -916,5 +1044,7 @@ module_platform_driver(pru_rproc_driver);
>> MODULE_AUTHOR("Suman Anna <s-anna@ti.com>");
>> MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
>> MODULE_AUTHOR("Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>");
>> +MODULE_AUTHOR("Puranjay Mohan <p-mohan@ti.com>");
>> +MODULE_AUTHOR("Md Danish Anwar <danishanwar@ti.com>");
>> MODULE_DESCRIPTION("PRU-ICSS Remote Processor Driver");
>> MODULE_LICENSE("GPL v2");
>> diff --git a/include/linux/pruss.h b/include/linux/pruss.h
>> new file mode 100644
>> index 000000000000..4909226f14a9
>> --- /dev/null
>> +++ b/include/linux/pruss.h
>> @@ -0,0 +1,47 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/**
>> + * PRU-ICSS Subsystem user interfaces
>> + *
>> + * Copyright (C) 2015-2022 Texas Instruments Incorporated - http://www.ti.com
>> + * Suman Anna <s-anna@ti.com>
>> + */
>> +
>> +#ifndef __LINUX_PRUSS_H
>> +#define __LINUX_PRUSS_H
>> +
>> +#include <linux/device.h>
>> +#include <linux/types.h>
>> +
>> +#define PRU_RPROC_DRVNAME "pru-rproc"
>> +
>> +struct device_node;
>> +
>> +#if IS_ENABLED(CONFIG_PRU_REMOTEPROC)
>> +
>> +struct rproc *pru_rproc_get(struct device_node *np, int index,
>> + enum pruss_pru_id *pru_id);
>
> Did you really send me code that doesn't compile? It sure looks that way...
>
Previously patch 2/6 and patch 3/6 of this series were part of the same patch.
In the previous version Roger asked to introduce the pruss_pru_id enum in a
separate patch. So I split the older patch 2/6 into two parts ( "Add APIs to
get and put the PRU cores" and "Add enum for PRU Core Identifiers").
I made the new patch as 3rd patch and kept this patch as second part of the
series. I compiled all the patches together and it was getting compiled properly.
There seems to be ordering issue, the current patch ([PATCH v9 2/6] remoteproc:
pru: Add APIs to get and put the PRU cores depends on the new patch ([PATCH v9
3/6] remoteproc: pru: Add enum for PRU Core Identifiers). I should have added
the current patch after the enum introduction patch. But my bad, I added them
the other way around.
I didn't compile patches individually. I compiled all 6 of them together and
they got compiled. I'll reorder the patches and make sure each patch compiles
properly.
Thanks,
Danish.
>
> CC drivers/remoteproc/pru_rproc.o
> In file included from /home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c:21:
> /home/mpoirier/work/remoteproc/kernel-review/include/linux/pruss.h:22:13: warning: ‘enum pruss_pru_id’ declared inside parameter list will not be visible outside of this definition or declaration
> 22 | enum pruss_pru_id *pru_id);
> | ^~~~~~~~~~~~
> /home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c:207:13: warning: ‘enum pruss_pru_id’ declared inside parameter list will not be visible outside of this definition or declaration
> 207 | enum pruss_pru_id *pru_id)
> | ^~~~~~~~~~~~
> /home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c:206:15: error: conflicting types for ‘pru_rproc_get’
> 206 | struct rproc *pru_rproc_get(struct device_node *np, int index,
> | ^~~~~~~~~~~~~
> In file included from /home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c:21:
> /home/mpoirier/work/remoteproc/kernel-review/include/linux/pruss.h:21:15: note: previous declaration of ‘pru_rproc_get’ was here
> 21 | struct rproc *pru_rproc_get(struct device_node *np, int index,
> | ^~~~~~~~~~~~~
> /home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c: In function ‘pru_rproc_get’:
> /home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c:235:3: error: dereferencing pointer to incomplete type ‘enum pruss_pru_id’
> 235 | *pru_id = pru->id;
> | ^~~~~~~
> In file included from /home/mpoirier/work/remoteproc/kernel-review/include/linux/linkage.h:7,
> from /home/mpoirier/work/remoteproc/kernel-review/include/linux/fs.h:5,
> from /home/mpoirier/work/remoteproc/kernel-review/include/linux/debugfs.h:15,
> from /home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c:16:
> /home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c: At top level:
> /home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c:243:19: error: conflicting types for ‘pru_rproc_get’
> 243 | EXPORT_SYMBOL_GPL(pru_rproc_get);
>
>> +void pru_rproc_put(struct rproc *rproc);
>> +
>> +#else
>> +
>> +static inline struct rproc *
>> +pru_rproc_get(struct device_node *np, int index, enum pruss_pru_id *pru_id)
>> +{
>> + return ERR_PTR(-EOPNOTSUPP);
>> +}
>> +
>> +static inline void pru_rproc_put(struct rproc *rproc) { }
>> +
>> +#endif /* CONFIG_PRU_REMOTEPROC */
>> +
>> +static inline bool is_pru_rproc(struct device *dev)
>> +{
>> + const char *drv_name = dev_driver_string(dev);
>> +
>> + if (strncmp(drv_name, PRU_RPROC_DRVNAME, sizeof(PRU_RPROC_DRVNAME)))
>> + return false;
>> +
>> + return true;
>> +}
>> +
>> +#endif /* __LINUX_PRUSS_H */
>> --
>> 2.25.1
>>
@@ -2,12 +2,14 @@
/*
* PRU-ICSS remoteproc driver for various TI SoCs
*
- * Copyright (C) 2014-2020 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2014-2022 Texas Instruments Incorporated - https://www.ti.com/
*
* Author(s):
* Suman Anna <s-anna@ti.com>
* Andrew F. Davis <afd@ti.com>
* Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> for Texas Instruments
+ * Puranjay Mohan <p-mohan@ti.com>
+ * Md Danish Anwar <danishanwar@ti.com>
*/
#include <linux/bitops.h>
@@ -16,6 +18,7 @@
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
+#include <linux/pruss.h>
#include <linux/pruss_driver.h>
#include <linux/remoteproc.h>
@@ -111,6 +114,8 @@ struct pru_private_data {
* @rproc: remoteproc pointer for this PRU core
* @data: PRU core specific data
* @mem_regions: data for each of the PRU memory regions
+ * @client_np: client device node
+ * @lock: mutex to protect client usage
* @fw_name: name of firmware image used during loading
* @mapped_irq: virtual interrupt numbers of created fw specific mapping
* @pru_interrupt_map: pointer to interrupt mapping description (firmware)
@@ -126,6 +131,8 @@ struct pru_rproc {
struct rproc *rproc;
const struct pru_private_data *data;
struct pruss_mem_region mem_regions[PRU_IOMEM_MAX];
+ struct device_node *client_np;
+ struct mutex lock;
const char *fw_name;
unsigned int *mapped_irq;
struct pru_irq_rsc *pru_interrupt_map;
@@ -146,6 +153,125 @@ void pru_control_write_reg(struct pru_rproc *pru, unsigned int reg, u32 val)
writel_relaxed(val, pru->mem_regions[PRU_IOMEM_CTRL].va + reg);
}
+static struct rproc *__pru_rproc_get(struct device_node *np, int index)
+{
+ struct rproc *rproc;
+ phandle rproc_phandle;
+ int ret;
+
+ ret = of_property_read_u32_index(np, "ti,prus", index, &rproc_phandle);
+ if (ret)
+ return ERR_PTR(ret);
+
+ rproc = rproc_get_by_phandle(rproc_phandle);
+ if (!rproc) {
+ ret = -EPROBE_DEFER;
+ goto err_no_rproc_handle;
+ }
+
+ /* make sure it is PRU rproc */
+ if (!is_pru_rproc(rproc->dev.parent)) {
+ rproc_put(rproc);
+ return ERR_PTR(-ENODEV);
+ }
+
+ return rproc;
+
+err_no_rproc_handle:
+ rproc_put(rproc);
+ return ERR_PTR(ret);
+}
+
+/**
+ * pru_rproc_get() - get the PRU rproc instance from a device node
+ * @np: the user/client device node
+ * @index: index to use for the ti,prus property
+ * @pru_id: optional pointer to return the PRU remoteproc processor id
+ *
+ * This function looks through a client device node's "ti,prus" property at
+ * index @index and returns the rproc handle for a valid PRU remote processor if
+ * found. The function allows only one user to own the PRU rproc resource at a
+ * time. Caller must call pru_rproc_put() when done with using the rproc, not
+ * required if the function returns a failure.
+ *
+ * When optional @pru_id pointer is passed the PRU remoteproc processor id is
+ * returned.
+ *
+ * Return: rproc handle on success, and an ERR_PTR on failure using one
+ * of the following error values
+ * -ENODEV if device is not found
+ * -EBUSY if PRU is already acquired by anyone
+ * -EPROBE_DEFER is PRU device is not probed yet
+ */
+struct rproc *pru_rproc_get(struct device_node *np, int index,
+ enum pruss_pru_id *pru_id)
+{
+ struct rproc *rproc;
+ struct pru_rproc *pru;
+ struct device *dev;
+ int ret;
+
+ rproc = __pru_rproc_get(np, index);
+ if (IS_ERR(rproc))
+ return rproc;
+
+ pru = rproc->priv;
+ dev = &rproc->dev;
+
+ mutex_lock(&pru->lock);
+
+ if (pru->client_np) {
+ mutex_unlock(&pru->lock);
+ put_device(dev);
+ ret = -EBUSY;
+ goto err_no_rproc_handle;
+ }
+
+ pru->client_np = np;
+
+ mutex_unlock(&pru->lock);
+
+ if (pru_id)
+ *pru_id = pru->id;
+
+ return rproc;
+
+err_no_rproc_handle:
+ rproc_put(rproc);
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(pru_rproc_get);
+
+/**
+ * pru_rproc_put() - release the PRU rproc resource
+ * @rproc: the rproc resource to release
+ *
+ * Releases the PRU rproc resource and makes it available to other
+ * users.
+ */
+void pru_rproc_put(struct rproc *rproc)
+{
+ struct pru_rproc *pru;
+
+ if (IS_ERR_OR_NULL(rproc) || !is_pru_rproc(rproc->dev.parent))
+ return;
+
+ pru = rproc->priv;
+
+ mutex_lock(&pru->lock);
+
+ if (!pru->client_np) {
+ mutex_unlock(&pru->lock);
+ return;
+ }
+
+ pru->client_np = NULL;
+ mutex_unlock(&pru->lock);
+
+ rproc_put(rproc);
+}
+EXPORT_SYMBOL_GPL(pru_rproc_put);
+
static inline u32 pru_debug_read_reg(struct pru_rproc *pru, unsigned int reg)
{
return readl_relaxed(pru->mem_regions[PRU_IOMEM_DEBUG].va + reg);
@@ -816,6 +942,8 @@ static int pru_rproc_probe(struct platform_device *pdev)
pru->pruss = platform_get_drvdata(ppdev);
pru->rproc = rproc;
pru->fw_name = fw_name;
+ pru->client_np = NULL;
+ mutex_init(&pru->lock);
for (i = 0; i < ARRAY_SIZE(mem_names); i++) {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
@@ -904,7 +1032,7 @@ MODULE_DEVICE_TABLE(of, pru_rproc_match);
static struct platform_driver pru_rproc_driver = {
.driver = {
- .name = "pru-rproc",
+ .name = PRU_RPROC_DRVNAME,
.of_match_table = pru_rproc_match,
.suppress_bind_attrs = true,
},
@@ -916,5 +1044,7 @@ module_platform_driver(pru_rproc_driver);
MODULE_AUTHOR("Suman Anna <s-anna@ti.com>");
MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
MODULE_AUTHOR("Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>");
+MODULE_AUTHOR("Puranjay Mohan <p-mohan@ti.com>");
+MODULE_AUTHOR("Md Danish Anwar <danishanwar@ti.com>");
MODULE_DESCRIPTION("PRU-ICSS Remote Processor Driver");
MODULE_LICENSE("GPL v2");
new file mode 100644
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/**
+ * PRU-ICSS Subsystem user interfaces
+ *
+ * Copyright (C) 2015-2022 Texas Instruments Incorporated - http://www.ti.com
+ * Suman Anna <s-anna@ti.com>
+ */
+
+#ifndef __LINUX_PRUSS_H
+#define __LINUX_PRUSS_H
+
+#include <linux/device.h>
+#include <linux/types.h>
+
+#define PRU_RPROC_DRVNAME "pru-rproc"
+
+struct device_node;
+
+#if IS_ENABLED(CONFIG_PRU_REMOTEPROC)
+
+struct rproc *pru_rproc_get(struct device_node *np, int index,
+ enum pruss_pru_id *pru_id);
+void pru_rproc_put(struct rproc *rproc);
+
+#else
+
+static inline struct rproc *
+pru_rproc_get(struct device_node *np, int index, enum pruss_pru_id *pru_id)
+{
+ return ERR_PTR(-EOPNOTSUPP);
+}
+
+static inline void pru_rproc_put(struct rproc *rproc) { }
+
+#endif /* CONFIG_PRU_REMOTEPROC */
+
+static inline bool is_pru_rproc(struct device *dev)
+{
+ const char *drv_name = dev_driver_string(dev);
+
+ if (strncmp(drv_name, PRU_RPROC_DRVNAME, sizeof(PRU_RPROC_DRVNAME)))
+ return false;
+
+ return true;
+}
+
+#endif /* __LINUX_PRUSS_H */