xfs: account extra freespace btree splits for multiple allocations

  There is a long standing issue which could cause fs shutdown due to
inode extent-to-btree conversion failure right after an extent
allocation in the same AG, which is absolutely unexpected due to the
proper minleft reservation in the previous allocation.  Brian once
addressed one of the root cause [1], however, such symptom can still
occur after the commit is merged as reported [2], and our cloud
environment is also suffering from this issue.

From the description of the commit [1], I found that Zirong has an
in-house stress test reproducer for this issue, therefore I asked him
to reproduce again and he confirmed that such issue can still be
reproduced on RHEL 9 in several days.

Thanks to him, after adding some debugging code to dump the current
transaction log items, I think the root cause is as below:

  1. xfs_bmapi_allocate() with the following condition:
     freeblks: 18304 pagf_flcount: 6
     reservation: 18276 need (min_free): 6
     args->minleft: 1
     available = freeblks + agflcount - reservation - need - minleft
               = 18304 + min(6, 6) - 18276 - 6 - 1 = 27
     The first allocation check itself is ok, and args->maxlen = 27
     here

     At this time, AG 3 also has the following state:
     1st:64  last:69  cnt:6  longest:6395

     AGFL has the following state:
     64:547 65:167 66:1651 67:2040807 68:783 69:604

  2. Tried to get 27 blocks from this AG, but in order to finish such
     allocation, it had to need a new btree block for cntbt (so take
     another free block from agfl).  It can be seen with a new AGF
     recorded in the transaction:
      blkno 62914177, len 1, map_size 1
      00000000: 58 41 47 46 00 00 00 01 00 00 00 03 00 27 ff f0  XAGF.........'..
      00000010: 00 00 00 09 00 00 00 07 00 00 00 00 00 00 00 02  ................
      00000020: 00 00 00 02 00 00 00 00 00 00 00 41 00 00 00 45  ...........A...E
      00000030: 00 00 00 05 00 00 47 65 00 00 18 fb 00 00 00 09  ......Ge........
      00000040: 75 dc c1 b5 1a 45 40 2a 80 50 72 f0 59 6e 62 66  u....E@*.Pr.Ynbf

      It can be parsed as:
      agf 3  flfirst: 65 (0x41) fllast: 69 (0x45) cnt: 5
      freeblks 18277

  3. agfl 64 (agbno 547, daddr 62918552) was then written as a cntbt
     block, which can also be seen in a log item as below:
       type#011= 0x123c
       flags#011= 0x8
      blkno 62918552, len 8, map_size 1
      00000000: 41 42 33 43 00 00 00 fd 00 1f 23 e4 ff ff ff ff  AB3C......#.....
      00000010: 00 00 00 00 03 c0 0f 98 00 00 00 00 00 00 00 00  ................
      00000020: 75 dc c1 b5 1a 45 40 2a 80 50 72 f0 59 6e 62 66  u....E@*.Pr.Ynbf
      ...

  4. Finally, the following inode extent to btree allocation fails
     as below:
     kernel: ------------[ cut here ]------------
     WARNING: CPU: 15 PID: 49290 at fs/xfs/libxfs/xfs_bmap.c:717 xfs_bmap_extents_to_btree+0xc51/0x1050 [xfs]
     ...
     XFS (sda2): agno 3 agflcount 5 freeblks 18277 reservation 18276 6

     since freeblks = 18304 - 27 = 18277, but with another agfl
     block allocated (pagf_flcount from 6 to 5), the inequality will
     not be satisfied:

     available = freeblks + agflcount - reservation - need - minleft
               = 18277 + min(5, 6) - 18276 - 6 - 0 = 0   < 1

  Full current transaction log item dump can be fetched from [3].

As a short-term solution, the following allocations (e.g. allocation
for inode extent-to-btree conversion) can be recorded in order to count
more blocks to reserve for safely freespace btree splits so that it
will shorten available and args->maxlen to
     available = freeblks + agflcount - reservation - need - minleft
               = 18304 + min(6, 6) - 18276 - 6*2 - 1 = 21
     args->maxlen = 21
in the first allocation, and the following conversion should then
succeed.  At least, it's easy to be backported and do hotfix.

In the long term, args->total and args->minleft have be revisited
although it could cause more refactoring.

[1] commit 1ca89fbc48e1 ("xfs: don't account extra agfl blocks as available")
    https://lore.kernel.org/r/20190327145000.10756-1-bfoster@redhat.com
[2] https://lore.kernel.org/r/20220105071052.GD20464@templeofstupid.com
[3] https://lore.kernel.org/linux-xfs/Y2RevDyoeJZSpiat@B-P7TQMD6M-0146.local/2-dmesg.log.xz
Reported-by: Zirong Lang <zlang@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
---
Previous discussion is at:
https://lore.kernel.org/linux-xfs/202211040048.FeUQMLE6-lkp@intel.com/T/#mfcfac181079ddaa5a22eecb74db56534fc4ff918

 fs/xfs/libxfs/xfs_alloc.c | 9 +++++++--
 fs/xfs/libxfs/xfs_alloc.h | 1 +
 fs/xfs/libxfs/xfs_bmap.c  | 2 ++
 3 files changed, 10 insertions(+), 2 deletions(-)
  

On Wed, Nov 09, 2022 at 11:48:02AM +0800, Gao Xiang wrote:
> There is a long standing issue which could cause fs shutdown due to
> inode extent-to-btree conversion failure right after an extent
> allocation in the same AG, which is absolutely unexpected due to the
> proper minleft reservation in the previous allocation.  Brian once
> addressed one of the root cause [1], however, such symptom can still
> occur after the commit is merged as reported [2], and our cloud
> environment is also suffering from this issue.
> 
> From the description of the commit [1], I found that Zirong has an
> in-house stress test reproducer for this issue, therefore I asked him
> to reproduce again and he confirmed that such issue can still be
> reproduced on RHEL 9 in several days.
> 
> Thanks to him, after adding some debugging code to dump the current
> transaction log items, I think the root cause is as below:
> 
>   1. xfs_bmapi_allocate() with the following condition:
>      freeblks: 18304 pagf_flcount: 6
>      reservation: 18276 need (min_free): 6
>      args->minleft: 1
>      available = freeblks + agflcount - reservation - need - minleft
>                = 18304 + min(6, 6) - 18276 - 6 - 1 = 27
>      The first allocation check itself is ok, and args->maxlen = 27
>      here
> 
>      At this time, AG 3 also has the following state:
>      1st:64  last:69  cnt:6  longest:6395
> 
>      AGFL has the following state:
>      64:547 65:167 66:1651 67:2040807 68:783 69:604
> 
>   2. Tried to get 27 blocks from this AG, but in order to finish such
>      allocation, it had to need a new btree block for cntbt (so take
>      another free block from agfl).  It can be seen with a new AGF
>      recorded in the transaction:
>       blkno 62914177, len 1, map_size 1
>       00000000: 58 41 47 46 00 00 00 01 00 00 00 03 00 27 ff f0  XAGF.........'..
>       00000010: 00 00 00 09 00 00 00 07 00 00 00 00 00 00 00 02  ................
>       00000020: 00 00 00 02 00 00 00 00 00 00 00 41 00 00 00 45  ...........A...E
>       00000030: 00 00 00 05 00 00 47 65 00 00 18 fb 00 00 00 09  ......Ge........
>       00000040: 75 dc c1 b5 1a 45 40 2a 80 50 72 f0 59 6e 62 66  u....E@*.Pr.Ynbf
> 
>       It can be parsed as:
>       agf 3  flfirst: 65 (0x41) fllast: 69 (0x45) cnt: 5
>       freeblks 18277
> 
>   3. agfl 64 (agbno 547, daddr 62918552) was then written as a cntbt
>      block, which can also be seen in a log item as below:
>        type#011= 0x123c
>        flags#011= 0x8
>       blkno 62918552, len 8, map_size 1
>       00000000: 41 42 33 43 00 00 00 fd 00 1f 23 e4 ff ff ff ff  AB3C......#.....
>       00000010: 00 00 00 00 03 c0 0f 98 00 00 00 00 00 00 00 00  ................
>       00000020: 75 dc c1 b5 1a 45 40 2a 80 50 72 f0 59 6e 62 66  u....E@*.Pr.Ynbf
>       ...
> 
>   4. Finally, the following inode extent to btree allocation fails
>      as below:
>      kernel: ------------[ cut here ]------------
>      WARNING: CPU: 15 PID: 49290 at fs/xfs/libxfs/xfs_bmap.c:717 xfs_bmap_extents_to_btree+0xc51/0x1050 [xfs]
>      ...
>      XFS (sda2): agno 3 agflcount 5 freeblks 18277 reservation 18276 6
> 
>      since freeblks = 18304 - 27 = 18277, but with another agfl
>      block allocated (pagf_flcount from 6 to 5), the inequality will
>      not be satisfied:
> 
>      available = freeblks + agflcount - reservation - need - minleft
>                = 18277 + min(5, 6) - 18276 - 6 - 0 = 0   < 1
> 
>   Full current transaction log item dump can be fetched from [3].
> 
> As a short-term solution, the following allocations (e.g. allocation
> for inode extent-to-btree conversion) can be recorded in order to count
> more blocks to reserve for safely freespace btree splits so that it
> will shorten available and args->maxlen to
>      available = freeblks + agflcount - reservation - need - minleft
>                = 18304 + min(6, 6) - 18276 - 6*2 - 1 = 21
>      args->maxlen = 21
> in the first allocation, and the following conversion should then
> succeed.  At least, it's easy to be backported and do hotfix.
> 
> In the long term, args->total and args->minleft have be revisited
> although it could cause more refactoring.
> 
> [1] commit 1ca89fbc48e1 ("xfs: don't account extra agfl blocks as available")
>     https://lore.kernel.org/r/20190327145000.10756-1-bfoster@redhat.com
> [2] https://lore.kernel.org/r/20220105071052.GD20464@templeofstupid.com
> [3] https://lore.kernel.org/linux-xfs/Y2RevDyoeJZSpiat@B-P7TQMD6M-0146.local/2-dmesg.log.xz
> Reported-by: Zirong Lang <zlang@redhat.com>
> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
> ---

FYI, I've tested this bug, with the original reproducer I hit this bug. Although
the reproducer is a big long time (3days) stress test, and can't reproduce
this bug 100%, but generally with about 1/5 chance.

So I submitted 6 testing jobs, all test passed today, didn't this bug, so I
think this patch works for me. (This testing can't replace regression test)

Anway, for more convince, I just submitted more 6 testing jobs again. They'll
be done on next Monday (11-14). I'll feedback if there're any problems, or
nothing wrong.

Thanks,
Zorro

> Previous discussion is at:
> https://lore.kernel.org/linux-xfs/202211040048.FeUQMLE6-lkp@intel.com/T/#mfcfac181079ddaa5a22eecb74db56534fc4ff918
> 
>  fs/xfs/libxfs/xfs_alloc.c | 9 +++++++--
>  fs/xfs/libxfs/xfs_alloc.h | 1 +
>  fs/xfs/libxfs/xfs_bmap.c  | 2 ++
>  3 files changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/fs/xfs/libxfs/xfs_alloc.c b/fs/xfs/libxfs/xfs_alloc.c
> index 6261599bb389..684c67310175 100644
> --- a/fs/xfs/libxfs/xfs_alloc.c
> +++ b/fs/xfs/libxfs/xfs_alloc.c
> @@ -2630,7 +2630,12 @@ xfs_alloc_fix_freelist(
>  		goto out_agbp_relse;
>  	}
>  
> -	need = xfs_alloc_min_freelist(mp, pag);
> +	/*
> +	 * Also need to fulfill freespace btree splits by reservaing more
> +	 * blocks to perform multiple allocations from a single AG and
> +	 * transaction if needed.
> +	 */
> +	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
>  	if (!xfs_alloc_space_available(args, need, flags |
>  			XFS_ALLOC_FLAG_CHECK))
>  		goto out_agbp_relse;
> @@ -2654,7 +2659,7 @@ xfs_alloc_fix_freelist(
>  		xfs_agfl_reset(tp, agbp, pag);
>  
>  	/* If there isn't enough total space or single-extent, reject it. */
> -	need = xfs_alloc_min_freelist(mp, pag);
> +	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
>  	if (!xfs_alloc_space_available(args, need, flags))
>  		goto out_agbp_relse;
>  
> diff --git a/fs/xfs/libxfs/xfs_alloc.h b/fs/xfs/libxfs/xfs_alloc.h
> index 2c3f762dfb58..be7f15d6a40d 100644
> --- a/fs/xfs/libxfs/xfs_alloc.h
> +++ b/fs/xfs/libxfs/xfs_alloc.h
> @@ -73,6 +73,7 @@ typedef struct xfs_alloc_arg {
>  	int		datatype;	/* mask defining data type treatment */
>  	char		wasdel;		/* set if allocation was prev delayed */
>  	char		wasfromfl;	/* set if allocation is from freelist */
> +	bool		postallocs;	/* number of post-allocations */
>  	struct xfs_owner_info	oinfo;	/* owner of blocks being allocated */
>  	enum xfs_ag_resv_type	resv;	/* block reservation to use */
>  #ifdef DEBUG
> diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c
> index 49d0d4ea63fc..ed92c6a314b6 100644
> --- a/fs/xfs/libxfs/xfs_bmap.c
> +++ b/fs/xfs/libxfs/xfs_bmap.c
> @@ -3497,6 +3497,7 @@ xfs_bmap_exact_minlen_extent_alloc(
>  	args.alignment = 1;
>  	args.minalignslop = 0;
>  
> +	args.postallocs = 1;
>  	args.minleft = ap->minleft;
>  	args.wasdel = ap->wasdel;
>  	args.resv = XFS_AG_RESV_NONE;
> @@ -3658,6 +3659,7 @@ xfs_bmap_btalloc(
>  		args.alignment = 1;
>  		args.minalignslop = 0;
>  	}
> +	args.postallocs = 1;
>  	args.minleft = ap->minleft;
>  	args.wasdel = ap->wasdel;
>  	args.resv = XFS_AG_RESV_NONE;
> -- 
> 2.24.4
>
  

On Wed, Nov 09, 2022 at 11:48:02AM +0800, Gao Xiang wrote:
> There is a long standing issue which could cause fs shutdown due to
> inode extent-to-btree conversion failure right after an extent
> allocation in the same AG, which is absolutely unexpected due to the
> proper minleft reservation in the previous allocation.  Brian once
> addressed one of the root cause [1], however, such symptom can still
> occur after the commit is merged as reported [2], and our cloud
> environment is also suffering from this issue.
> 
> From the description of the commit [1], I found that Zirong has an
> in-house stress test reproducer for this issue, therefore I asked him
> to reproduce again and he confirmed that such issue can still be
> reproduced on RHEL 9 in several days.
> 
> Thanks to him, after adding some debugging code to dump the current
> transaction log items, I think the root cause is as below:
> 
>   1. xfs_bmapi_allocate() with the following condition:
>      freeblks: 18304 pagf_flcount: 6
>      reservation: 18276 need (min_free): 6
>      args->minleft: 1
>      available = freeblks + agflcount - reservation - need - minleft
>                = 18304 + min(6, 6) - 18276 - 6 - 1 = 27
>      The first allocation check itself is ok, and args->maxlen = 27
>      here
> 
>      At this time, AG 3 also has the following state:
>      1st:64  last:69  cnt:6  longest:6395
> 
>      AGFL has the following state:
>      64:547 65:167 66:1651 67:2040807 68:783 69:604
> 
>   2. Tried to get 27 blocks from this AG, but in order to finish such
>      allocation, it had to need a new btree block for cntbt (so take
>      another free block from agfl).  It can be seen with a new AGF
>      recorded in the transaction:
>       blkno 62914177, len 1, map_size 1
>       00000000: 58 41 47 46 00 00 00 01 00 00 00 03 00 27 ff f0  XAGF.........'..
>       00000010: 00 00 00 09 00 00 00 07 00 00 00 00 00 00 00 02  ................
>       00000020: 00 00 00 02 00 00 00 00 00 00 00 41 00 00 00 45  ...........A...E
>       00000030: 00 00 00 05 00 00 47 65 00 00 18 fb 00 00 00 09  ......Ge........
>       00000040: 75 dc c1 b5 1a 45 40 2a 80 50 72 f0 59 6e 62 66  u....E@*.Pr.Ynbf
> 
>       It can be parsed as:
>       agf 3  flfirst: 65 (0x41) fllast: 69 (0x45) cnt: 5
>       freeblks 18277
> 
>   3. agfl 64 (agbno 547, daddr 62918552) was then written as a cntbt
>      block, which can also be seen in a log item as below:
>        type#011= 0x123c
>        flags#011= 0x8
>       blkno 62918552, len 8, map_size 1
>       00000000: 41 42 33 43 00 00 00 fd 00 1f 23 e4 ff ff ff ff  AB3C......#.....
>       00000010: 00 00 00 00 03 c0 0f 98 00 00 00 00 00 00 00 00  ................
>       00000020: 75 dc c1 b5 1a 45 40 2a 80 50 72 f0 59 6e 62 66  u....E@*.Pr.Ynbf
>       ...
> 
>   4. Finally, the following inode extent to btree allocation fails
>      as below:
>      kernel: ------------[ cut here ]------------
>      WARNING: CPU: 15 PID: 49290 at fs/xfs/libxfs/xfs_bmap.c:717 xfs_bmap_extents_to_btree+0xc51/0x1050 [xfs]
>      ...
>      XFS (sda2): agno 3 agflcount 5 freeblks 18277 reservation 18276 6
> 
>      since freeblks = 18304 - 27 = 18277, but with another agfl
>      block allocated (pagf_flcount from 6 to 5), the inequality will
>      not be satisfied:
> 
>      available = freeblks + agflcount - reservation - need - minleft
>                = 18277 + min(5, 6) - 18276 - 6 - 0 = 0   < 1
> 
>   Full current transaction log item dump can be fetched from [3].
> 
> As a short-term solution, the following allocations (e.g. allocation
> for inode extent-to-btree conversion) can be recorded in order to count
> more blocks to reserve for safely freespace btree splits so that it
> will shorten available and args->maxlen to
>      available = freeblks + agflcount - reservation - need - minleft
>                = 18304 + min(6, 6) - 18276 - 6*2 - 1 = 21
>      args->maxlen = 21
> in the first allocation, and the following conversion should then
> succeed.  At least, it's easy to be backported and do hotfix.
> 
> In the long term, args->total and args->minleft have be revisited
> although it could cause more refactoring.
> 
> [1] commit 1ca89fbc48e1 ("xfs: don't account extra agfl blocks as available")
>     https://lore.kernel.org/r/20190327145000.10756-1-bfoster@redhat.com
> [2] https://lore.kernel.org/r/20220105071052.GD20464@templeofstupid.com
> [3] https://lore.kernel.org/linux-xfs/Y2RevDyoeJZSpiat@B-P7TQMD6M-0146.local/2-dmesg.log.xz
> Reported-by: Zirong Lang <zlang@redhat.com>
> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
> ---
> Previous discussion is at:
> https://lore.kernel.org/linux-xfs/202211040048.FeUQMLE6-lkp@intel.com/T/#mfcfac181079ddaa5a22eecb74db56534fc4ff918
> 
>  fs/xfs/libxfs/xfs_alloc.c | 9 +++++++--
>  fs/xfs/libxfs/xfs_alloc.h | 1 +
>  fs/xfs/libxfs/xfs_bmap.c  | 2 ++
>  3 files changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/fs/xfs/libxfs/xfs_alloc.c b/fs/xfs/libxfs/xfs_alloc.c
> index 6261599bb389..684c67310175 100644
> --- a/fs/xfs/libxfs/xfs_alloc.c
> +++ b/fs/xfs/libxfs/xfs_alloc.c
> @@ -2630,7 +2630,12 @@ xfs_alloc_fix_freelist(
>  		goto out_agbp_relse;
>  	}
>  
> -	need = xfs_alloc_min_freelist(mp, pag);
> +	/*
> +	 * Also need to fulfill freespace btree splits by reservaing more
> +	 * blocks to perform multiple allocations from a single AG and
> +	 * transaction if needed.
> +	 */
> +	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
>  	if (!xfs_alloc_space_available(args, need, flags |
>  			XFS_ALLOC_FLAG_CHECK))
>  		goto out_agbp_relse;
> @@ -2654,7 +2659,7 @@ xfs_alloc_fix_freelist(
>  		xfs_agfl_reset(tp, agbp, pag);
>  
>  	/* If there isn't enough total space or single-extent, reject it. */
> -	need = xfs_alloc_min_freelist(mp, pag);
> +	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
>  	if (!xfs_alloc_space_available(args, need, flags))
>  		goto out_agbp_relse;
>  
> diff --git a/fs/xfs/libxfs/xfs_alloc.h b/fs/xfs/libxfs/xfs_alloc.h
> index 2c3f762dfb58..be7f15d6a40d 100644
> --- a/fs/xfs/libxfs/xfs_alloc.h
> +++ b/fs/xfs/libxfs/xfs_alloc.h
> @@ -73,6 +73,7 @@ typedef struct xfs_alloc_arg {
>  	int		datatype;	/* mask defining data type treatment */
>  	char		wasdel;		/* set if allocation was prev delayed */
>  	char		wasfromfl;	/* set if allocation is from freelist */
> +	bool		postallocs;	/* number of post-allocations */
>  	struct xfs_owner_info	oinfo;	/* owner of blocks being allocated */
>  	enum xfs_ag_resv_type	resv;	/* block reservation to use */
>  #ifdef DEBUG
> diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c
> index 49d0d4ea63fc..ed92c6a314b6 100644
> --- a/fs/xfs/libxfs/xfs_bmap.c
> +++ b/fs/xfs/libxfs/xfs_bmap.c
> @@ -3497,6 +3497,7 @@ xfs_bmap_exact_minlen_extent_alloc(
>  	args.alignment = 1;
>  	args.minalignslop = 0;
>  
> +	args.postallocs = 1;
>  	args.minleft = ap->minleft;
>  	args.wasdel = ap->wasdel;
>  	args.resv = XFS_AG_RESV_NONE;
> @@ -3658,6 +3659,7 @@ xfs_bmap_btalloc(
>  		args.alignment = 1;
>  		args.minalignslop = 0;
>  	}
> +	args.postallocs = 1;
>  	args.minleft = ap->minleft;
>  	args.wasdel = ap->wasdel;
>  	args.resv = XFS_AG_RESV_NONE;

That's not going to work. What happens when we do a full bno
split? Or we do both a bno and a cnt split in the same allocation?

Regardless, I don't see anything wrong with the allocation setup -
it's telling the allocation code exactly what it needs for
subsequent BMBT block allocations to succeed (i.e. args->minleft).
The problem here is that the internal allocation code is failing to
handle the corner case where space is just about gone correctly.

As I pointed out previously - we have a huge amount of reserve space
available in the AG here, so why not use some of the reserve space
to get out of this temporary deficit corner case? We can argue that
it's not really a deficit, either, because moving free blocks to the
free list still accounts them as unused and free, so could still
make up part of the unused reservation....

i.e. is the problem here simply that we don't allow AGFL blocks to
be considered part of the reserved free space?

-Dave.
  

Hi Dave,

On Sat, Nov 12, 2022 at 07:39:05AM +1100, Dave Chinner wrote:
> On Wed, Nov 09, 2022 at 11:48:02AM +0800, Gao Xiang wrote:
> > There is a long standing issue which could cause fs shutdown due to
> > inode extent-to-btree conversion failure right after an extent
> > allocation in the same AG, which is absolutely unexpected due to the
> > proper minleft reservation in the previous allocation.  Brian once
> > addressed one of the root cause [1], however, such symptom can still
> > occur after the commit is merged as reported [2], and our cloud
> > environment is also suffering from this issue.
> > 
> > From the description of the commit [1], I found that Zirong has an
> > in-house stress test reproducer for this issue, therefore I asked him
> > to reproduce again and he confirmed that such issue can still be
> > reproduced on RHEL 9 in several days.
> > 
> > Thanks to him, after adding some debugging code to dump the current
> > transaction log items, I think the root cause is as below:
> > 
> >   1. xfs_bmapi_allocate() with the following condition:
> >      freeblks: 18304 pagf_flcount: 6
> >      reservation: 18276 need (min_free): 6
> >      args->minleft: 1
> >      available = freeblks + agflcount - reservation - need - minleft
> >                = 18304 + min(6, 6) - 18276 - 6 - 1 = 27
> >      The first allocation check itself is ok, and args->maxlen = 27
> >      here
> > 
> >      At this time, AG 3 also has the following state:
> >      1st:64  last:69  cnt:6  longest:6395
> > 
> >      AGFL has the following state:
> >      64:547 65:167 66:1651 67:2040807 68:783 69:604
> > 
> >   2. Tried to get 27 blocks from this AG, but in order to finish such
> >      allocation, it had to need a new btree block for cntbt (so take
> >      another free block from agfl).  It can be seen with a new AGF
> >      recorded in the transaction:
> >       blkno 62914177, len 1, map_size 1
> >       00000000: 58 41 47 46 00 00 00 01 00 00 00 03 00 27 ff f0  XAGF.........'..
> >       00000010: 00 00 00 09 00 00 00 07 00 00 00 00 00 00 00 02  ................
> >       00000020: 00 00 00 02 00 00 00 00 00 00 00 41 00 00 00 45  ...........A...E
> >       00000030: 00 00 00 05 00 00 47 65 00 00 18 fb 00 00 00 09  ......Ge........
> >       00000040: 75 dc c1 b5 1a 45 40 2a 80 50 72 f0 59 6e 62 66  u....E@*.Pr.Ynbf
> > 
> >       It can be parsed as:
> >       agf 3  flfirst: 65 (0x41) fllast: 69 (0x45) cnt: 5
> >       freeblks 18277
> > 
> >   3. agfl 64 (agbno 547, daddr 62918552) was then written as a cntbt
> >      block, which can also be seen in a log item as below:
> >        type#011= 0x123c
> >        flags#011= 0x8
> >       blkno 62918552, len 8, map_size 1
> >       00000000: 41 42 33 43 00 00 00 fd 00 1f 23 e4 ff ff ff ff  AB3C......#.....
> >       00000010: 00 00 00 00 03 c0 0f 98 00 00 00 00 00 00 00 00  ................
> >       00000020: 75 dc c1 b5 1a 45 40 2a 80 50 72 f0 59 6e 62 66  u....E@*.Pr.Ynbf
> >       ...
> > 
> >   4. Finally, the following inode extent to btree allocation fails
> >      as below:
> >      kernel: ------------[ cut here ]------------
> >      WARNING: CPU: 15 PID: 49290 at fs/xfs/libxfs/xfs_bmap.c:717 xfs_bmap_extents_to_btree+0xc51/0x1050 [xfs]
> >      ...
> >      XFS (sda2): agno 3 agflcount 5 freeblks 18277 reservation 18276 6
> > 
> >      since freeblks = 18304 - 27 = 18277, but with another agfl
> >      block allocated (pagf_flcount from 6 to 5), the inequality will
> >      not be satisfied:
> > 
> >      available = freeblks + agflcount - reservation - need - minleft
> >                = 18277 + min(5, 6) - 18276 - 6 - 0 = 0   < 1
> > 
> >   Full current transaction log item dump can be fetched from [3].
> > 
> > As a short-term solution, the following allocations (e.g. allocation
> > for inode extent-to-btree conversion) can be recorded in order to count
> > more blocks to reserve for safely freespace btree splits so that it
> > will shorten available and args->maxlen to
> >      available = freeblks + agflcount - reservation - need - minleft
> >                = 18304 + min(6, 6) - 18276 - 6*2 - 1 = 21
> >      args->maxlen = 21
> > in the first allocation, and the following conversion should then
> > succeed.  At least, it's easy to be backported and do hotfix.
> > 
> > In the long term, args->total and args->minleft have be revisited
> > although it could cause more refactoring.
> > 
> > [1] commit 1ca89fbc48e1 ("xfs: don't account extra agfl blocks as available")
> >     https://lore.kernel.org/r/20190327145000.10756-1-bfoster@redhat.com
> > [2] https://lore.kernel.org/r/20220105071052.GD20464@templeofstupid.com
> > [3] https://lore.kernel.org/linux-xfs/Y2RevDyoeJZSpiat@B-P7TQMD6M-0146.local/2-dmesg.log.xz
> > Reported-by: Zirong Lang <zlang@redhat.com>
> > Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
> > ---
> > Previous discussion is at:
> > https://lore.kernel.org/linux-xfs/202211040048.FeUQMLE6-lkp@intel.com/T/#mfcfac181079ddaa5a22eecb74db56534fc4ff918
> > 
> >  fs/xfs/libxfs/xfs_alloc.c | 9 +++++++--
> >  fs/xfs/libxfs/xfs_alloc.h | 1 +
> >  fs/xfs/libxfs/xfs_bmap.c  | 2 ++
> >  3 files changed, 10 insertions(+), 2 deletions(-)
> > 
> > diff --git a/fs/xfs/libxfs/xfs_alloc.c b/fs/xfs/libxfs/xfs_alloc.c
> > index 6261599bb389..684c67310175 100644
> > --- a/fs/xfs/libxfs/xfs_alloc.c
> > +++ b/fs/xfs/libxfs/xfs_alloc.c
> > @@ -2630,7 +2630,12 @@ xfs_alloc_fix_freelist(
> >  		goto out_agbp_relse;
> >  	}
> >  
> > -	need = xfs_alloc_min_freelist(mp, pag);
> > +	/*
> > +	 * Also need to fulfill freespace btree splits by reservaing more
> > +	 * blocks to perform multiple allocations from a single AG and
> > +	 * transaction if needed.
> > +	 */
> > +	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
> >  	if (!xfs_alloc_space_available(args, need, flags |
> >  			XFS_ALLOC_FLAG_CHECK))
> >  		goto out_agbp_relse;
> > @@ -2654,7 +2659,7 @@ xfs_alloc_fix_freelist(
> >  		xfs_agfl_reset(tp, agbp, pag);
> >  
> >  	/* If there isn't enough total space or single-extent, reject it. */
> > -	need = xfs_alloc_min_freelist(mp, pag);
> > +	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
> >  	if (!xfs_alloc_space_available(args, need, flags))
> >  		goto out_agbp_relse;
> >  
> > diff --git a/fs/xfs/libxfs/xfs_alloc.h b/fs/xfs/libxfs/xfs_alloc.h
> > index 2c3f762dfb58..be7f15d6a40d 100644
> > --- a/fs/xfs/libxfs/xfs_alloc.h
> > +++ b/fs/xfs/libxfs/xfs_alloc.h
> > @@ -73,6 +73,7 @@ typedef struct xfs_alloc_arg {
> >  	int		datatype;	/* mask defining data type treatment */
> >  	char		wasdel;		/* set if allocation was prev delayed */
> >  	char		wasfromfl;	/* set if allocation is from freelist */
> > +	bool		postallocs;	/* number of post-allocations */
> >  	struct xfs_owner_info	oinfo;	/* owner of blocks being allocated */
> >  	enum xfs_ag_resv_type	resv;	/* block reservation to use */
> >  #ifdef DEBUG
> > diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c
> > index 49d0d4ea63fc..ed92c6a314b6 100644
> > --- a/fs/xfs/libxfs/xfs_bmap.c
> > +++ b/fs/xfs/libxfs/xfs_bmap.c
> > @@ -3497,6 +3497,7 @@ xfs_bmap_exact_minlen_extent_alloc(
> >  	args.alignment = 1;
> >  	args.minalignslop = 0;
> >  
> > +	args.postallocs = 1;
> >  	args.minleft = ap->minleft;
> >  	args.wasdel = ap->wasdel;
> >  	args.resv = XFS_AG_RESV_NONE;
> > @@ -3658,6 +3659,7 @@ xfs_bmap_btalloc(
> >  		args.alignment = 1;
> >  		args.minalignslop = 0;
> >  	}
> > +	args.postallocs = 1;
> >  	args.minleft = ap->minleft;
> >  	args.wasdel = ap->wasdel;
> >  	args.resv = XFS_AG_RESV_NONE;
> 
> That's not going to work. What happens when we do a full bno
> split? Or we do both a bno and a cnt split in the same allocation?

I'm not sure if I got your point or not. I think it reserves another
full splits in the first allocation by doing:

	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);

as I wrote above.

> 
> Regardless, I don't see anything wrong with the allocation setup -
> it's telling the allocation code exactly what it needs for
> subsequent BMBT block allocations to succeed (i.e. args->minleft).

In the long term, I think the main point is that args->minleft doesn't
have the exact meaning.  I don't know how many blocks should be counted
by args->minleft or other ways.

> The problem here is that the internal allocation code is failing to
> handle the corner case where space is just about gone correctly.
> 
> As I pointed out previously - we have a huge amount of reserve space
> available in the AG here, so why not use some of the reserve space
> to get out of this temporary deficit corner case? We can argue that
> it's not really a deficit, either, because moving free blocks to the
> free list still accounts them as unused and free, so could still
> make up part of the unused reservation....
> 
> i.e. is the problem here simply that we don't allow AGFL blocks to
> be considered part of the reserved free space?

I don't know how to simply reuse per-AG reservation blocks for this,
and I think it could another corner case for this if it designs without
careful thinking.  For the moment, I'd like to have a quick fix for
our all old kernels, and if it's possible, we'd like to upstream it
first.

Thanks,
Gao Xiang

> 
> -Dave.
> -- 
> Dave Chinner
> david@fromorbit.com
  

On Sat, Nov 12, 2022 at 07:46:33AM +0800, Gao Xiang wrote:
> Hi Dave,
> 
> On Sat, Nov 12, 2022 at 07:39:05AM +1100, Dave Chinner wrote:
> > On Wed, Nov 09, 2022 at 11:48:02AM +0800, Gao Xiang wrote:
> > > There is a long standing issue which could cause fs shutdown due to
> > > inode extent-to-btree conversion failure right after an extent
> > > allocation in the same AG, which is absolutely unexpected due to the
> > > proper minleft reservation in the previous allocation.  Brian once
> > > addressed one of the root cause [1], however, such symptom can still
> > > occur after the commit is merged as reported [2], and our cloud
> > > environment is also suffering from this issue.
> > > 
> > > From the description of the commit [1], I found that Zirong has an
> > > in-house stress test reproducer for this issue, therefore I asked him
> > > to reproduce again and he confirmed that such issue can still be
> > > reproduced on RHEL 9 in several days.
> > > 
> > > Thanks to him, after adding some debugging code to dump the current
> > > transaction log items, I think the root cause is as below:
> > > 
> > >   1. xfs_bmapi_allocate() with the following condition:
> > >      freeblks: 18304 pagf_flcount: 6
> > >      reservation: 18276 need (min_free): 6
> > >      args->minleft: 1
> > >      available = freeblks + agflcount - reservation - need - minleft
> > >                = 18304 + min(6, 6) - 18276 - 6 - 1 = 27
> > >      The first allocation check itself is ok, and args->maxlen = 27
> > >      here
> > > 
> > >      At this time, AG 3 also has the following state:
> > >      1st:64  last:69  cnt:6  longest:6395
> > > 
> > >      AGFL has the following state:
> > >      64:547 65:167 66:1651 67:2040807 68:783 69:604
> > > 
> > >   2. Tried to get 27 blocks from this AG, but in order to finish such
> > >      allocation, it had to need a new btree block for cntbt (so take
> > >      another free block from agfl).  It can be seen with a new AGF
> > >      recorded in the transaction:
> > >       blkno 62914177, len 1, map_size 1
> > >       00000000: 58 41 47 46 00 00 00 01 00 00 00 03 00 27 ff f0  XAGF.........'..
> > >       00000010: 00 00 00 09 00 00 00 07 00 00 00 00 00 00 00 02  ................
> > >       00000020: 00 00 00 02 00 00 00 00 00 00 00 41 00 00 00 45  ...........A...E
> > >       00000030: 00 00 00 05 00 00 47 65 00 00 18 fb 00 00 00 09  ......Ge........
> > >       00000040: 75 dc c1 b5 1a 45 40 2a 80 50 72 f0 59 6e 62 66  u....E@*.Pr.Ynbf
> > > 
> > >       It can be parsed as:
> > >       agf 3  flfirst: 65 (0x41) fllast: 69 (0x45) cnt: 5
> > >       freeblks 18277
> > > 
> > >   3. agfl 64 (agbno 547, daddr 62918552) was then written as a cntbt
> > >      block, which can also be seen in a log item as below:
> > >        type#011= 0x123c
> > >        flags#011= 0x8
> > >       blkno 62918552, len 8, map_size 1
> > >       00000000: 41 42 33 43 00 00 00 fd 00 1f 23 e4 ff ff ff ff  AB3C......#.....
> > >       00000010: 00 00 00 00 03 c0 0f 98 00 00 00 00 00 00 00 00  ................
> > >       00000020: 75 dc c1 b5 1a 45 40 2a 80 50 72 f0 59 6e 62 66  u....E@*.Pr.Ynbf
> > >       ...
> > > 
> > >   4. Finally, the following inode extent to btree allocation fails
> > >      as below:
> > >      kernel: ------------[ cut here ]------------
> > >      WARNING: CPU: 15 PID: 49290 at fs/xfs/libxfs/xfs_bmap.c:717 xfs_bmap_extents_to_btree+0xc51/0x1050 [xfs]
> > >      ...
> > >      XFS (sda2): agno 3 agflcount 5 freeblks 18277 reservation 18276 6
> > > 
> > >      since freeblks = 18304 - 27 = 18277, but with another agfl
> > >      block allocated (pagf_flcount from 6 to 5), the inequality will
> > >      not be satisfied:
> > > 
> > >      available = freeblks + agflcount - reservation - need - minleft
> > >                = 18277 + min(5, 6) - 18276 - 6 - 0 = 0   < 1
> > > 
> > >   Full current transaction log item dump can be fetched from [3].
> > > 
> > > As a short-term solution, the following allocations (e.g. allocation
> > > for inode extent-to-btree conversion) can be recorded in order to count
> > > more blocks to reserve for safely freespace btree splits so that it
> > > will shorten available and args->maxlen to
> > >      available = freeblks + agflcount - reservation - need - minleft
> > >                = 18304 + min(6, 6) - 18276 - 6*2 - 1 = 21
> > >      args->maxlen = 21
> > > in the first allocation, and the following conversion should then
> > > succeed.  At least, it's easy to be backported and do hotfix.
> > > 
> > > In the long term, args->total and args->minleft have be revisited
> > > although it could cause more refactoring.
> > > 
> > > [1] commit 1ca89fbc48e1 ("xfs: don't account extra agfl blocks as available")
> > >     https://lore.kernel.org/r/20190327145000.10756-1-bfoster@redhat.com
> > > [2] https://lore.kernel.org/r/20220105071052.GD20464@templeofstupid.com
> > > [3] https://lore.kernel.org/linux-xfs/Y2RevDyoeJZSpiat@B-P7TQMD6M-0146.local/2-dmesg.log.xz
> > > Reported-by: Zirong Lang <zlang@redhat.com>
> > > Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
> > > ---
> > > Previous discussion is at:
> > > https://lore.kernel.org/linux-xfs/202211040048.FeUQMLE6-lkp@intel.com/T/#mfcfac181079ddaa5a22eecb74db56534fc4ff918
> > > 
> > >  fs/xfs/libxfs/xfs_alloc.c | 9 +++++++--
> > >  fs/xfs/libxfs/xfs_alloc.h | 1 +
> > >  fs/xfs/libxfs/xfs_bmap.c  | 2 ++
> > >  3 files changed, 10 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/fs/xfs/libxfs/xfs_alloc.c b/fs/xfs/libxfs/xfs_alloc.c
> > > index 6261599bb389..684c67310175 100644
> > > --- a/fs/xfs/libxfs/xfs_alloc.c
> > > +++ b/fs/xfs/libxfs/xfs_alloc.c
> > > @@ -2630,7 +2630,12 @@ xfs_alloc_fix_freelist(
> > >  		goto out_agbp_relse;
> > >  	}
> > >  
> > > -	need = xfs_alloc_min_freelist(mp, pag);
> > > +	/
> > > +	 * Also need to fulfill freespace btree splits by reservaing more
> > > +	 * blocks to perform multiple allocations from a single AG and
> > > +	 * transaction if needed.
> > > +	 */
> > > +	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
> > >  	if (!xfs_alloc_space_available(args, need, flags |
> > >  			XFS_ALLOC_FLAG_CHECK))
> > >  		goto out_agbp_relse;
> > > @@ -2654,7 +2659,7 @@ xfs_alloc_fix_freelist(
> > >  		xfs_agfl_reset(tp, agbp, pag);
> > >  
> > >  	/* If there isn't enough total space or single-extent, reject it. */
> > > -	need = xfs_alloc_min_freelist(mp, pag);
> > > +	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
> > >  	if (!xfs_alloc_space_available(args, need, flags))
> > >  		goto out_agbp_relse;
> > >  
> > > diff --git a/fs/xfs/libxfs/xfs_alloc.h b/fs/xfs/libxfs/xfs_alloc.h
> > > index 2c3f762dfb58..be7f15d6a40d 100644
> > > --- a/fs/xfs/libxfs/xfs_alloc.h
> > > +++ b/fs/xfs/libxfs/xfs_alloc.h
> > > @@ -73,6 +73,7 @@ typedef struct xfs_alloc_arg {
> > >  	int		datatype;	/* mask defining data type treatment */
> > >  	char		wasdel;		/* set if allocation was prev delayed */
> > >  	char		wasfromfl;	/* set if allocation is from freelist */
> > > +	bool		postallocs;	/* number of post-allocations */
> > >  	struct xfs_owner_info	oinfo;	/* owner of blocks being allocated */
> > >  	enum xfs_ag_resv_type	resv;	/* block reservation to use */
> > >  #ifdef DEBUG
> > > diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c
> > > index 49d0d4ea63fc..ed92c6a314b6 100644
> > > --- a/fs/xfs/libxfs/xfs_bmap.c
> > > +++ b/fs/xfs/libxfs/xfs_bmap.c
> > > @@ -3497,6 +3497,7 @@ xfs_bmap_exact_minlen_extent_alloc(
> > >  	args.alignment = 1;
> > >  	args.minalignslop = 0;
> > >  
> > > +	args.postallocs = 1;
> > >  	args.minleft = ap->minleft;
> > >  	args.wasdel = ap->wasdel;
> > >  	args.resv = XFS_AG_RESV_NONE;
> > > @@ -3658,6 +3659,7 @@ xfs_bmap_btalloc(
> > >  		args.alignment = 1;
> > >  		args.minalignslop = 0;
> > >  	}
> > > +	args.postallocs = 1;
> > >  	args.minleft = ap->minleft;
> > >  	args.wasdel = ap->wasdel;
> > >  	args.resv = XFS_AG_RESV_NONE;
> > 
> > That's not going to work. What happens when we do a full bno
> > split? Or we do both a bno and a cnt split in the same allocation?
> 
> I'm not sure if I got your point or not. I think it reserves another
> full splits in the first allocation by doing:
> 
> 	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
> 
> as I wrote above.

You're changing the BMBT reservation code. If the first "post-extent
BMBT block allocation" does a full split of both the bno/cnt trees,
then this uses all the AGFL reservations made.

How many blocks does a BMBT split need to allocate?

> > Regardless, I don't see anything wrong with the allocation setup -
> > it's telling the allocation code exactly what it needs for
> > subsequent BMBT block allocations to succeed (i.e. args->minleft).
> 
> In the long term, I think the main point is that args->minleft doesn't
> have the exact meaning.  I don't know how many blocks should be counted
> by args->minleft or other ways.

args->minleft has an *exact* meaning - that the AG must have that
many blocks left available for potential btree record insertion
allocations after the initial extent is allocated. For inode fork
allocations, the BMBT blocks required is defined by
xfs_bmapi_minleft(). For inode chunk extent allocation and inobt
record insertion, it is defined by the pre-calculated
igeo->inobt_maxlevels variable.

IOWs, this "postalloc" concept is redundant - minleft already
provides the maximum number of single block allocations that need to
have space reserved in the AG for the initial extent allocation to
succeed. i.e.  the allocation setup is already taking into account
blocks needed for extra allocations within the AG, but that's not
being handled correctly by the AG allocation code.

On review, it is quite possible that args->minleft is not being
handled by the BMBT and inobt block allocation code correctly.
Shouldn't btree block allocation drop args->minleft by 1 for
each block that is allocated?

> > The problem here is that the internal allocation code is failing to
> > handle the corner case where space is just about gone correctly.
> > 
> > As I pointed out previously - we have a huge amount of reserve space
> > available in the AG here, so why not use some of the reserve space
> > to get out of this temporary deficit corner case? We can argue that
> > it's not really a deficit, either, because moving free blocks to the
> > free list still accounts them as unused and free, so could still
> > make up part of the unused reservation....
> > 
> > i.e. is the problem here simply that we don't allow AGFL blocks to
> > be considered part of the reserved free space?
> 
> I don't know how to simply reuse per-AG reservation blocks for this,

I don't know either, which is *why I asked the question*. i.e. I'm
asking for you to investigate a potential alternative solution that
challenges a design assumption this code makes. i.e. AGBNO and AGCNT
btree blocks are considered free space because when we are at ENOSPC
they are empty.

However, with this ag reservation code, we can be at ENOSPC when
there are still tens of thousands of free extents, and hence the
AGBNO and AGCNT btree blocks are used space, not free space. The
AGFL accounting is based on AGFL blocks being considered free space,
which matches the AG btree blocks being considered free space, and
so maybe the root of the problem here is the assumption that AG
btree blocks and AGFL blocks are accounted as free space rather than
part of this new "reserved space"....

> and I think it could another corner case for this if it designs without
> careful thinking.  For the moment, I'd like to have a quick fix for
> our all old kernels, and if it's possible, we'd like to upstream it
> first.

Slapping expedient bandaids into upstream kernels because some
vendor production kernel needs a quick fix is bad process and bad
policy.

"Upstream first" as a policy was originally intended for major
changes (e.g new features, design changes, on-disk format changes,
etc) to ensure that there is consensus on the changes and they've
been adequately reviewed before they get deployed to production
environments.

Over time, this has morphed into vendors defining "upstream first"
as "we can't ship any code unless it is upstream first". That's a
much different policy, and while the intention is good it is being
used more and more frequently as a big hammer to try to force
upstream to take poor code. i.e. it encourages vendor engineers to
"hack on a problem until it goes away, then get it merged upstream
because *urgent for production* and upstream first!!!!".

IOWs, "upstream first" is not intended as a mechanism to enable
band-aids to be applied so some random production system can avoid
an issue right now. "upstream first" as a policy is intended to get
the *right fix to production systems* as quickly as possible.

If anyone wants upstream to merge a band-aid that is easy to back
port, then it should be provided as the first patch in the series
that fixes the problem properly. The series that is merged needs to
effectively remove the technical debt the "easy to backport"
band-aid adds to the kernel. The end result in the upstream kernel
should always be "we fixed the problem to the best of our
abilities", not "we fixed the problem as quickly as possible"....

Cheers,

-Dave.
  

On Fri, Nov 11, 2022 at 02:04:50PM +0800, Zorro Lang wrote:
> On Wed, Nov 09, 2022 at 11:48:02AM +0800, Gao Xiang wrote:
> > There is a long standing issue which could cause fs shutdown due to
> > inode extent-to-btree conversion failure right after an extent
> > allocation in the same AG, which is absolutely unexpected due to the
> > proper minleft reservation in the previous allocation.  Brian once
> > addressed one of the root cause [1], however, such symptom can still
> > occur after the commit is merged as reported [2], and our cloud
> > environment is also suffering from this issue.
> > 
> > From the description of the commit [1], I found that Zirong has an
> > in-house stress test reproducer for this issue, therefore I asked him
> > to reproduce again and he confirmed that such issue can still be
> > reproduced on RHEL 9 in several days.
> > 
> > Thanks to him, after adding some debugging code to dump the current
> > transaction log items, I think the root cause is as below:
> > 
> >   1. xfs_bmapi_allocate() with the following condition:
> >      freeblks: 18304 pagf_flcount: 6
> >      reservation: 18276 need (min_free): 6
> >      args->minleft: 1
> >      available = freeblks + agflcount - reservation - need - minleft
> >                = 18304 + min(6, 6) - 18276 - 6 - 1 = 27
> >      The first allocation check itself is ok, and args->maxlen = 27
> >      here
> > 
> >      At this time, AG 3 also has the following state:
> >      1st:64  last:69  cnt:6  longest:6395
> > 
> >      AGFL has the following state:
> >      64:547 65:167 66:1651 67:2040807 68:783 69:604
> > 
> >   2. Tried to get 27 blocks from this AG, but in order to finish such
> >      allocation, it had to need a new btree block for cntbt (so take
> >      another free block from agfl).  It can be seen with a new AGF
> >      recorded in the transaction:
> >       blkno 62914177, len 1, map_size 1
> >       00000000: 58 41 47 46 00 00 00 01 00 00 00 03 00 27 ff f0  XAGF.........'..
> >       00000010: 00 00 00 09 00 00 00 07 00 00 00 00 00 00 00 02  ................
> >       00000020: 00 00 00 02 00 00 00 00 00 00 00 41 00 00 00 45  ...........A...E
> >       00000030: 00 00 00 05 00 00 47 65 00 00 18 fb 00 00 00 09  ......Ge........
> >       00000040: 75 dc c1 b5 1a 45 40 2a 80 50 72 f0 59 6e 62 66  u....E@*.Pr.Ynbf
> > 
> >       It can be parsed as:
> >       agf 3  flfirst: 65 (0x41) fllast: 69 (0x45) cnt: 5
> >       freeblks 18277
> > 
> >   3. agfl 64 (agbno 547, daddr 62918552) was then written as a cntbt
> >      block, which can also be seen in a log item as below:
> >        type#011= 0x123c
> >        flags#011= 0x8
> >       blkno 62918552, len 8, map_size 1
> >       00000000: 41 42 33 43 00 00 00 fd 00 1f 23 e4 ff ff ff ff  AB3C......#.....
> >       00000010: 00 00 00 00 03 c0 0f 98 00 00 00 00 00 00 00 00  ................
> >       00000020: 75 dc c1 b5 1a 45 40 2a 80 50 72 f0 59 6e 62 66  u....E@*.Pr.Ynbf
> >       ...
> > 
> >   4. Finally, the following inode extent to btree allocation fails
> >      as below:
> >      kernel: ------------[ cut here ]------------
> >      WARNING: CPU: 15 PID: 49290 at fs/xfs/libxfs/xfs_bmap.c:717 xfs_bmap_extents_to_btree+0xc51/0x1050 [xfs]
> >      ...
> >      XFS (sda2): agno 3 agflcount 5 freeblks 18277 reservation 18276 6
> > 
> >      since freeblks = 18304 - 27 = 18277, but with another agfl
> >      block allocated (pagf_flcount from 6 to 5), the inequality will
> >      not be satisfied:
> > 
> >      available = freeblks + agflcount - reservation - need - minleft
> >                = 18277 + min(5, 6) - 18276 - 6 - 0 = 0   < 1
> > 
> >   Full current transaction log item dump can be fetched from [3].
> > 
> > As a short-term solution, the following allocations (e.g. allocation
> > for inode extent-to-btree conversion) can be recorded in order to count
> > more blocks to reserve for safely freespace btree splits so that it
> > will shorten available and args->maxlen to
> >      available = freeblks + agflcount - reservation - need - minleft
> >                = 18304 + min(6, 6) - 18276 - 6*2 - 1 = 21
> >      args->maxlen = 21
> > in the first allocation, and the following conversion should then
> > succeed.  At least, it's easy to be backported and do hotfix.
> > 
> > In the long term, args->total and args->minleft have be revisited
> > although it could cause more refactoring.
> > 
> > [1] commit 1ca89fbc48e1 ("xfs: don't account extra agfl blocks as available")
> >     https://lore.kernel.org/r/20190327145000.10756-1-bfoster@redhat.com
> > [2] https://lore.kernel.org/r/20220105071052.GD20464@templeofstupid.com
> > [3] https://lore.kernel.org/linux-xfs/Y2RevDyoeJZSpiat@B-P7TQMD6M-0146.local/2-dmesg.log.xz
> > Reported-by: Zirong Lang <zlang@redhat.com>
> > Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
> > ---
> 
> FYI, I've tested this bug, with the original reproducer I hit this bug. Although
> the reproducer is a big long time (3days) stress test, and can't reproduce
> this bug 100%, but generally with about 1/5 chance.
> 
> So I submitted 6 testing jobs, all test passed today, didn't this bug, so I
> think this patch works for me. (This testing can't replace regression test)
> 
> Anway, for more convince, I just submitted more 6 testing jobs again. They'll
> be done on next Monday (11-14). I'll feedback if there're any problems, or
> nothing wrong.

FYI, 6 more testing jobs test passed today.

> 
> Thanks,
> Zorro
> 
> > Previous discussion is at:
> > https://lore.kernel.org/linux-xfs/202211040048.FeUQMLE6-lkp@intel.com/T/#mfcfac181079ddaa5a22eecb74db56534fc4ff918
> > 
> >  fs/xfs/libxfs/xfs_alloc.c | 9 +++++++--
> >  fs/xfs/libxfs/xfs_alloc.h | 1 +
> >  fs/xfs/libxfs/xfs_bmap.c  | 2 ++
> >  3 files changed, 10 insertions(+), 2 deletions(-)
> > 
> > diff --git a/fs/xfs/libxfs/xfs_alloc.c b/fs/xfs/libxfs/xfs_alloc.c
> > index 6261599bb389..684c67310175 100644
> > --- a/fs/xfs/libxfs/xfs_alloc.c
> > +++ b/fs/xfs/libxfs/xfs_alloc.c
> > @@ -2630,7 +2630,12 @@ xfs_alloc_fix_freelist(
> >  		goto out_agbp_relse;
> >  	}
> >  
> > -	need = xfs_alloc_min_freelist(mp, pag);
> > +	/*
> > +	 * Also need to fulfill freespace btree splits by reservaing more
> > +	 * blocks to perform multiple allocations from a single AG and
> > +	 * transaction if needed.
> > +	 */
> > +	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
> >  	if (!xfs_alloc_space_available(args, need, flags |
> >  			XFS_ALLOC_FLAG_CHECK))
> >  		goto out_agbp_relse;
> > @@ -2654,7 +2659,7 @@ xfs_alloc_fix_freelist(
> >  		xfs_agfl_reset(tp, agbp, pag);
> >  
> >  	/* If there isn't enough total space or single-extent, reject it. */
> > -	need = xfs_alloc_min_freelist(mp, pag);
> > +	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
> >  	if (!xfs_alloc_space_available(args, need, flags))
> >  		goto out_agbp_relse;
> >  
> > diff --git a/fs/xfs/libxfs/xfs_alloc.h b/fs/xfs/libxfs/xfs_alloc.h
> > index 2c3f762dfb58..be7f15d6a40d 100644
> > --- a/fs/xfs/libxfs/xfs_alloc.h
> > +++ b/fs/xfs/libxfs/xfs_alloc.h
> > @@ -73,6 +73,7 @@ typedef struct xfs_alloc_arg {
> >  	int		datatype;	/* mask defining data type treatment */
> >  	char		wasdel;		/* set if allocation was prev delayed */
> >  	char		wasfromfl;	/* set if allocation is from freelist */
> > +	bool		postallocs;	/* number of post-allocations */
> >  	struct xfs_owner_info	oinfo;	/* owner of blocks being allocated */
> >  	enum xfs_ag_resv_type	resv;	/* block reservation to use */
> >  #ifdef DEBUG
> > diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c
> > index 49d0d4ea63fc..ed92c6a314b6 100644
> > --- a/fs/xfs/libxfs/xfs_bmap.c
> > +++ b/fs/xfs/libxfs/xfs_bmap.c
> > @@ -3497,6 +3497,7 @@ xfs_bmap_exact_minlen_extent_alloc(
> >  	args.alignment = 1;
> >  	args.minalignslop = 0;
> >  
> > +	args.postallocs = 1;
> >  	args.minleft = ap->minleft;
> >  	args.wasdel = ap->wasdel;
> >  	args.resv = XFS_AG_RESV_NONE;
> > @@ -3658,6 +3659,7 @@ xfs_bmap_btalloc(
> >  		args.alignment = 1;
> >  		args.minalignslop = 0;
> >  	}
> > +	args.postallocs = 1;
> >  	args.minleft = ap->minleft;
> >  	args.wasdel = ap->wasdel;
> >  	args.resv = XFS_AG_RESV_NONE;
> > -- 
> > 2.24.4
> >
  

Hi Dave,

On Sun, Nov 13, 2022 at 08:45:45AM +1100, Dave Chinner wrote:
> On Sat, Nov 12, 2022 at 07:46:33AM +0800, Gao Xiang wrote:
> > Hi Dave,
> > 
> > On Sat, Nov 12, 2022 at 07:39:05AM +1100, Dave Chinner wrote:
> > > On Wed, Nov 09, 2022 at 11:48:02AM +0800, Gao Xiang wrote:
> > > > There is a long standing issue which could cause fs shutdown due to
> > > > inode extent-to-btree conversion failure right after an extent
> > > > allocation in the same AG, which is absolutely unexpected due to the
> > > > proper minleft reservation in the previous allocation.  Brian once
> > > > addressed one of the root cause [1], however, such symptom can still
> > > > occur after the commit is merged as reported [2], and our cloud
> > > > environment is also suffering from this issue.
> > > > 
> > > > From the description of the commit [1], I found that Zirong has an
> > > > in-house stress test reproducer for this issue, therefore I asked him
> > > > to reproduce again and he confirmed that such issue can still be
> > > > reproduced on RHEL 9 in several days.
> > > > 
> > > > Thanks to him, after adding some debugging code to dump the current
> > > > transaction log items, I think the root cause is as below:
> > > > 
> > > >   1. xfs_bmapi_allocate() with the following condition:
> > > >      freeblks: 18304 pagf_flcount: 6
> > > >      reservation: 18276 need (min_free): 6
> > > >      args->minleft: 1
> > > >      available = freeblks + agflcount - reservation - need - minleft
> > > >                = 18304 + min(6, 6) - 18276 - 6 - 1 = 27
> > > >      The first allocation check itself is ok, and args->maxlen = 27
> > > >      here
> > > > 
> > > >      At this time, AG 3 also has the following state:
> > > >      1st:64  last:69  cnt:6  longest:6395
> > > > 
> > > >      AGFL has the following state:
> > > >      64:547 65:167 66:1651 67:2040807 68:783 69:604
> > > > 
> > > >   2. Tried to get 27 blocks from this AG, but in order to finish such
> > > >      allocation, it had to need a new btree block for cntbt (so take
> > > >      another free block from agfl).  It can be seen with a new AGF
> > > >      recorded in the transaction:
> > > >       blkno 62914177, len 1, map_size 1
> > > >       00000000: 58 41 47 46 00 00 00 01 00 00 00 03 00 27 ff f0  XAGF.........'..
> > > >       00000010: 00 00 00 09 00 00 00 07 00 00 00 00 00 00 00 02  ................
> > > >       00000020: 00 00 00 02 00 00 00 00 00 00 00 41 00 00 00 45  ...........A...E
> > > >       00000030: 00 00 00 05 00 00 47 65 00 00 18 fb 00 00 00 09  ......Ge........
> > > >       00000040: 75 dc c1 b5 1a 45 40 2a 80 50 72 f0 59 6e 62 66  u....E@*.Pr.Ynbf
> > > > 
> > > >       It can be parsed as:
> > > >       agf 3  flfirst: 65 (0x41) fllast: 69 (0x45) cnt: 5
> > > >       freeblks 18277
> > > > 
> > > >   3. agfl 64 (agbno 547, daddr 62918552) was then written as a cntbt
> > > >      block, which can also be seen in a log item as below:
> > > >        type#011= 0x123c
> > > >        flags#011= 0x8
> > > >       blkno 62918552, len 8, map_size 1
> > > >       00000000: 41 42 33 43 00 00 00 fd 00 1f 23 e4 ff ff ff ff  AB3C......#.....
> > > >       00000010: 00 00 00 00 03 c0 0f 98 00 00 00 00 00 00 00 00  ................
> > > >       00000020: 75 dc c1 b5 1a 45 40 2a 80 50 72 f0 59 6e 62 66  u....E@*.Pr.Ynbf
> > > >       ...
> > > > 
> > > >   4. Finally, the following inode extent to btree allocation fails
> > > >      as below:
> > > >      kernel: ------------[ cut here ]------------
> > > >      WARNING: CPU: 15 PID: 49290 at fs/xfs/libxfs/xfs_bmap.c:717 xfs_bmap_extents_to_btree+0xc51/0x1050 [xfs]
> > > >      ...
> > > >      XFS (sda2): agno 3 agflcount 5 freeblks 18277 reservation 18276 6
> > > > 
> > > >      since freeblks = 18304 - 27 = 18277, but with another agfl
> > > >      block allocated (pagf_flcount from 6 to 5), the inequality will
> > > >      not be satisfied:
> > > > 
> > > >      available = freeblks + agflcount - reservation - need - minleft
> > > >                = 18277 + min(5, 6) - 18276 - 6 - 0 = 0   < 1
> > > > 
> > > >   Full current transaction log item dump can be fetched from [3].
> > > > 
> > > > As a short-term solution, the following allocations (e.g. allocation
> > > > for inode extent-to-btree conversion) can be recorded in order to count
> > > > more blocks to reserve for safely freespace btree splits so that it
> > > > will shorten available and args->maxlen to
> > > >      available = freeblks + agflcount - reservation - need - minleft
> > > >                = 18304 + min(6, 6) - 18276 - 6*2 - 1 = 21
> > > >      args->maxlen = 21
> > > > in the first allocation, and the following conversion should then
> > > > succeed.  At least, it's easy to be backported and do hotfix.
> > > > 
> > > > In the long term, args->total and args->minleft have be revisited
> > > > although it could cause more refactoring.
> > > > 
> > > > [1] commit 1ca89fbc48e1 ("xfs: don't account extra agfl blocks as available")
> > > >     https://lore.kernel.org/r/20190327145000.10756-1-bfoster@redhat.com
> > > > [2] https://lore.kernel.org/r/20220105071052.GD20464@templeofstupid.com
> > > > [3] https://lore.kernel.org/linux-xfs/Y2RevDyoeJZSpiat@B-P7TQMD6M-0146.local/2-dmesg.log.xz
> > > > Reported-by: Zirong Lang <zlang@redhat.com>
> > > > Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
> > > > ---
> > > > Previous discussion is at:
> > > > https://lore.kernel.org/linux-xfs/202211040048.FeUQMLE6-lkp@intel.com/T/#mfcfac181079ddaa5a22eecb74db56534fc4ff918
> > > > 
> > > >  fs/xfs/libxfs/xfs_alloc.c | 9 +++++++--
> > > >  fs/xfs/libxfs/xfs_alloc.h | 1 +
> > > >  fs/xfs/libxfs/xfs_bmap.c  | 2 ++
> > > >  3 files changed, 10 insertions(+), 2 deletions(-)
> > > > 
> > > > diff --git a/fs/xfs/libxfs/xfs_alloc.c b/fs/xfs/libxfs/xfs_alloc.c
> > > > index 6261599bb389..684c67310175 100644
> > > > --- a/fs/xfs/libxfs/xfs_alloc.c
> > > > +++ b/fs/xfs/libxfs/xfs_alloc.c
> > > > @@ -2630,7 +2630,12 @@ xfs_alloc_fix_freelist(
> > > >  		goto out_agbp_relse;
> > > >  	}
> > > >  
> > > > -	need = xfs_alloc_min_freelist(mp, pag);
> > > > +	/
> > > > +	 * Also need to fulfill freespace btree splits by reservaing more
> > > > +	 * blocks to perform multiple allocations from a single AG and
> > > > +	 * transaction if needed.
> > > > +	 */
> > > > +	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
> > > >  	if (!xfs_alloc_space_available(args, need, flags |
> > > >  			XFS_ALLOC_FLAG_CHECK))
> > > >  		goto out_agbp_relse;
> > > > @@ -2654,7 +2659,7 @@ xfs_alloc_fix_freelist(
> > > >  		xfs_agfl_reset(tp, agbp, pag);
> > > >  
> > > >  	/* If there isn't enough total space or single-extent, reject it. */
> > > > -	need = xfs_alloc_min_freelist(mp, pag);
> > > > +	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
> > > >  	if (!xfs_alloc_space_available(args, need, flags))
> > > >  		goto out_agbp_relse;
> > > >  
> > > > diff --git a/fs/xfs/libxfs/xfs_alloc.h b/fs/xfs/libxfs/xfs_alloc.h
> > > > index 2c3f762dfb58..be7f15d6a40d 100644
> > > > --- a/fs/xfs/libxfs/xfs_alloc.h
> > > > +++ b/fs/xfs/libxfs/xfs_alloc.h
> > > > @@ -73,6 +73,7 @@ typedef struct xfs_alloc_arg {
> > > >  	int		datatype;	/* mask defining data type treatment */
> > > >  	char		wasdel;		/* set if allocation was prev delayed */
> > > >  	char		wasfromfl;	/* set if allocation is from freelist */
> > > > +	bool		postallocs;	/* number of post-allocations */
> > > >  	struct xfs_owner_info	oinfo;	/* owner of blocks being allocated */
> > > >  	enum xfs_ag_resv_type	resv;	/* block reservation to use */
> > > >  #ifdef DEBUG
> > > > diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c
> > > > index 49d0d4ea63fc..ed92c6a314b6 100644
> > > > --- a/fs/xfs/libxfs/xfs_bmap.c
> > > > +++ b/fs/xfs/libxfs/xfs_bmap.c
> > > > @@ -3497,6 +3497,7 @@ xfs_bmap_exact_minlen_extent_alloc(
> > > >  	args.alignment = 1;
> > > >  	args.minalignslop = 0;
> > > >  
> > > > +	args.postallocs = 1;
> > > >  	args.minleft = ap->minleft;
> > > >  	args.wasdel = ap->wasdel;
> > > >  	args.resv = XFS_AG_RESV_NONE;
> > > > @@ -3658,6 +3659,7 @@ xfs_bmap_btalloc(
> > > >  		args.alignment = 1;
> > > >  		args.minalignslop = 0;
> > > >  	}
> > > > +	args.postallocs = 1;
> > > >  	args.minleft = ap->minleft;
> > > >  	args.wasdel = ap->wasdel;
> > > >  	args.resv = XFS_AG_RESV_NONE;
> > > 
> > > That's not going to work. What happens when we do a full bno
> > > split? Or we do both a bno and a cnt split in the same allocation?
> > 
> > I'm not sure if I got your point or not. I think it reserves another
> > full splits in the first allocation by doing:
> > 
> > 	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
> > 
> > as I wrote above.
> 
> You're changing the BMBT reservation code. If the first "post-extent
> BMBT block allocation" does a full split of both the bno/cnt trees,
> then this uses all the AGFL reservations made.

Emmm... I have to align my understanding of this first, I think one
example of what you meant is
  1. allocate an extent for an inode with minleft = 1;
  2. then do extents-to-btree allocation with one block, even minleft
     was reserved as 1 in the previous allocation but such one-block
     allocation from non-AGFL can cause full bno/cnt splits, which
     could takes xfs_alloc_min_freelist() blocks from AGFL and could
     take up all AGFL blocks?

If my understanding above is like what you said, I think the current
codebase may also have a chance to eat up all AGFL blocks in the first
allocation since more agfl blocks are only filled in
xfs_alloc_fix_freelist(), but later xfs_alloc_ag_vextent() could
cause full bno/cnt splits as well?

Please help correct me if my understanding about your ask is wrong.

> 
> How many blocks does a BMBT split need to allocate?

IMO, a full bmbt split can allocate btree level blocks at maximum,
but if these block allocation cause bno/cnt btree splits, that
needs more than such blocks.  So I think that's why AGFL is needed
for XFS.  IOWs, that is to prepare enough blocks for bno/cnt splits
to avoid cyclic dependency.

But I'm not sure if the current AGFL reservation works properly
if multiple allocations must be succeeded in the same AG, see below..)

> 
> > > Regardless, I don't see anything wrong with the allocation setup -
> > > it's telling the allocation code exactly what it needs for
> > > subsequent BMBT block allocations to succeed (i.e. args->minleft).
> > 
> > In the long term, I think the main point is that args->minleft doesn't
> > have the exact meaning.  I don't know how many blocks should be counted
> > by args->minleft or other ways.
> 
> args->minleft has an *exact* meaning - that the AG must have that
> many blocks left available for potential btree record insertion
> allocations after the initial extent is allocated. For inode fork
> allocations, the BMBT blocks required is defined by
> xfs_bmapi_minleft(). For inode chunk extent allocation and inobt
> record insertion, it is defined by the pre-calculated
> igeo->inobt_maxlevels variable.
> 
> IOWs, this "postalloc" concept is redundant - minleft already
> provides the maximum number of single block allocations that need to
> have space reserved in the AG for the initial extent allocation to
> succeed. i.e.  the allocation setup is already taking into account
> blocks needed for extra allocations within the AG, but that's not
> being handled correctly by the AG allocation code.

I don't think it's the case as I described in the patch commit message,
if we go over the words at the top, the main point is
 
 In the first allocation, minleft = 1, the current allocator assumes
 it can allocate an extent with 27 blocks (the remaining blocks are
 18276 per-AG reservation, 6 for AGFL reservation, 1 for inode extents
 -to-btree for the following allocation).

 But here in order to finish this allocation with 27 blocks, it splits
 cntbt so that it takes another unexpected block from AGFL, and
 that wasn't accounted in minleft (or with any other fields) before.

 I don't think it can be directly described by minleft because
 such extra bno/cntbt reservation needs more knowledge of bno/cntbt
 internals (such as current bno/cnt btree levels), so I don't think
 it should belong to BMBT allocation code at least.

 So here I introduced another variable to describe the total number
 of post-allocations, I think it's just enough to resolve the inode
 extents-to-btree bno/cntbt reservation issue.

> 
> On review, it is quite possible that args->minleft is not being
> handled by the BMBT and inobt block allocation code correctly.
> Shouldn't btree block allocation drop args->minleft by 1 for
> each block that is allocated?

At least, in order to convert from inode extents-to-btree, we need
another block for the following allocation, so minleft = 1 here.

	if (ifp->if_format != XFS_DINODE_FMT_BTREE)
		return 1;

So I guess what you meant is
	return be16_to_cpu(ifp->if_broot->bb_level) + 1; ?

I don't know why it has another 1 here, yet even if we account an
extra block here, I think it doesn't have some critical result
since the worst case is that it just returns -ENOSPC in advance.

But in principle, most users use terabytes XFS, so I think such
one extra block doesn't matter too much.  I will update this if
such 1 is meaningless, but it doesn't actually contribute to the
real shutdown issue.

> 
> > > The problem here is that the internal allocation code is failing to
> > > handle the corner case where space is just about gone correctly.
> > > 
> > > As I pointed out previously - we have a huge amount of reserve space
> > > available in the AG here, so why not use some of the reserve space
> > > to get out of this temporary deficit corner case? We can argue that
> > > it's not really a deficit, either, because moving free blocks to the
> > > free list still accounts them as unused and free, so could still
> > > make up part of the unused reservation....
> > > 
> > > i.e. is the problem here simply that we don't allow AGFL blocks to
> > > be considered part of the reserved free space?
> > 
> > I don't know how to simply reuse per-AG reservation blocks for this,
> 
> I don't know either, which is *why I asked the question*. i.e. I'm
> asking for you to investigate a potential alternative solution that
> challenges a design assumption this code makes. i.e. AGBNO and AGCNT
> btree blocks are considered free space because when we are at ENOSPC
> they are empty.
> 
> However, with this ag reservation code, we can be at ENOSPC when
> there are still tens of thousands of free extents, and hence the
> AGBNO and AGCNT btree blocks are used space, not free space. The
> AGFL accounting is based on AGFL blocks being considered free space,
> which matches the AG btree blocks being considered free space, and
> so maybe the root of the problem here is the assumption that AG
> btree blocks and AGFL blocks are accounted as free space rather than
> part of this new "reserved space"....

I have strong feeling that the current per-AG reservation code (or
AGFL reservation as in xfs_alloc_min_freelist() ) doesn't work
properly for multiple allocations in the same AG in order to make
sure such multiple allocations all succeed.

Also, a wilder question is that I'm not sure why such multiple
allocations in oneshot _cannot_ be handled with a defer ops as
some new log intent, so that we don't need to care about minleft
messy anymore.

> 
> > and I think it could another corner case for this if it designs without
> > careful thinking.  For the moment, I'd like to have a quick fix for
> > our all old kernels, and if it's possible, we'd like to upstream it
> > first.
> 
> Slapping expedient bandaids into upstream kernels because some
> vendor production kernel needs a quick fix is bad process and bad
> policy.
> 
> "Upstream first" as a policy was originally intended for major
> changes (e.g new features, design changes, on-disk format changes,
> etc) to ensure that there is consensus on the changes and they've
> been adequately reviewed before they get deployed to production
> environments.
> 
> Over time, this has morphed into vendors defining "upstream first"
> as "we can't ship any code unless it is upstream first". That's a
> much different policy, and while the intention is good it is being
> used more and more frequently as a big hammer to try to force
> upstream to take poor code. i.e. it encourages vendor engineers to
> "hack on a problem until it goes away, then get it merged upstream
> because *urgent for production* and upstream first!!!!".
> 
> IOWs, "upstream first" is not intended as a mechanism to enable
> band-aids to be applied so some random production system can avoid
> an issue right now. "upstream first" as a policy is intended to get
> the *right fix to production systems* as quickly as possible.
> 
> If anyone wants upstream to merge a band-aid that is easy to back
> port, then it should be provided as the first patch in the series
> that fixes the problem properly. The series that is merged needs to
> effectively remove the technical debt the "easy to backport"
> band-aid adds to the kernel. The end result in the upstream kernel
> should always be "we fixed the problem to the best of our
> abilities", not "we fixed the problem as quickly as possible"....
> 

One request, could we discuss further about how to resolve this
issue properly on IRC?  I really would like to take time to resolve
this issue formally and I can imagine it's not a easy fix.
Yet I think I need your/Darrick more inputs/tendency about this.

For now, I have to apply this patch to our production, otherwise,
it has very bad impacts to our cloud business by using XFS...
since user workloads could be shut down without any sign before.

Thanks,
Gao Xiang


> Cheers,
> 
> -Dave.
> -- 
> Dave Chinner
> david@fromorbit.com
  

On Tue, Nov 15, 2022 at 03:57:54PM +0800, Gao Xiang wrote:
> On Sun, Nov 13, 2022 at 08:45:45AM +1100, Dave Chinner wrote:
> > On Sat, Nov 12, 2022 at 07:46:33AM +0800, Gao Xiang wrote:
> > > On Sat, Nov 12, 2022 at 07:39:05AM +1100, Dave Chinner wrote:
> > > > On Wed, Nov 09, 2022 at 11:48:02AM +0800, Gao Xiang wrote:
> > > > > diff --git a/fs/xfs/libxfs/xfs_alloc.c b/fs/xfs/libxfs/xfs_alloc.c
> > > > > index 6261599bb389..684c67310175 100644
> > > > > --- a/fs/xfs/libxfs/xfs_alloc.c
> > > > > +++ b/fs/xfs/libxfs/xfs_alloc.c
> > > > > @@ -2630,7 +2630,12 @@ xfs_alloc_fix_freelist(
> > > > >  		goto out_agbp_relse;
> > > > >  	}
> > > > >  
> > > > > -	need = xfs_alloc_min_freelist(mp, pag);
> > > > > +	/
> > > > > +	 * Also need to fulfill freespace btree splits by reservaing more
> > > > > +	 * blocks to perform multiple allocations from a single AG and
> > > > > +	 * transaction if needed.
> > > > > +	 */
> > > > > +	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
> > > > >  	if (!xfs_alloc_space_available(args, need, flags |
> > > > >  			XFS_ALLOC_FLAG_CHECK))
> > > > >  		goto out_agbp_relse;
> > > > > @@ -2654,7 +2659,7 @@ xfs_alloc_fix_freelist(
> > > > >  		xfs_agfl_reset(tp, agbp, pag);
> > > > >  
> > > > >  	/* If there isn't enough total space or single-extent, reject it. */
> > > > > -	need = xfs_alloc_min_freelist(mp, pag);
> > > > > +	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
> > > > >  	if (!xfs_alloc_space_available(args, need, flags))
> > > > >  		goto out_agbp_relse;
> > > > >  
> > > > > diff --git a/fs/xfs/libxfs/xfs_alloc.h b/fs/xfs/libxfs/xfs_alloc.h
> > > > > index 2c3f762dfb58..be7f15d6a40d 100644
> > > > > --- a/fs/xfs/libxfs/xfs_alloc.h
> > > > > +++ b/fs/xfs/libxfs/xfs_alloc.h
> > > > > @@ -73,6 +73,7 @@ typedef struct xfs_alloc_arg {
> > > > >  	int		datatype;	/* mask defining data type treatment */
> > > > >  	char		wasdel;		/* set if allocation was prev delayed */
> > > > >  	char		wasfromfl;	/* set if allocation is from freelist */
> > > > > +	bool		postallocs;	/* number of post-allocations */
> > > > >  	struct xfs_owner_info	oinfo;	/* owner of blocks being allocated */
> > > > >  	enum xfs_ag_resv_type	resv;	/* block reservation to use */
> > > > >  #ifdef DEBUG
> > > > > diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c
> > > > > index 49d0d4ea63fc..ed92c6a314b6 100644
> > > > > --- a/fs/xfs/libxfs/xfs_bmap.c
> > > > > +++ b/fs/xfs/libxfs/xfs_bmap.c
> > > > > @@ -3497,6 +3497,7 @@ xfs_bmap_exact_minlen_extent_alloc(
> > > > >  	args.alignment = 1;
> > > > >  	args.minalignslop = 0;
> > > > >  
> > > > > +	args.postallocs = 1;
> > > > >  	args.minleft = ap->minleft;
> > > > >  	args.wasdel = ap->wasdel;
> > > > >  	args.resv = XFS_AG_RESV_NONE;
> > > > > @@ -3658,6 +3659,7 @@ xfs_bmap_btalloc(
> > > > >  		args.alignment = 1;
> > > > >  		args.minalignslop = 0;
> > > > >  	}
> > > > > +	args.postallocs = 1;
> > > > >  	args.minleft = ap->minleft;
> > > > >  	args.wasdel = ap->wasdel;
> > > > >  	args.resv = XFS_AG_RESV_NONE;
> > > > 
> > > > That's not going to work. What happens when we do a full bno
> > > > split? Or we do both a bno and a cnt split in the same allocation?
> > > 
> > > I'm not sure if I got your point or not. I think it reserves another
> > > full splits in the first allocation by doing:
> > > 
> > > 	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
> > > 
> > > as I wrote above.
> > 
> > You're changing the BMBT reservation code. If the first "post-extent
> > BMBT block allocation" does a full split of both the bno/cnt trees,
> > then this uses all the AGFL reservations made.
> 
> Emmm... I have to align my understanding of this first, I think one
> example of what you meant is
>   1. allocate an extent for an inode with minleft = 1;
>   2. then do extents-to-btree allocation with one block, even minleft
>      was reserved as 1 in the previous allocation but such one-block
>      allocation from non-AGFL can cause full bno/cnt splits, which
>      could takes xfs_alloc_min_freelist() blocks from AGFL and could
>      take up all AGFL blocks?
>
> If my understanding above is like what you said, I think the current
> codebase may also have a chance to eat up all AGFL blocks in the first
> allocation since more agfl blocks are only filled in
> xfs_alloc_fix_freelist(), but later xfs_alloc_ag_vextent() could
> cause full bno/cnt splits as well?

Yes, the second allocation here might only require 1 block, which is
what args->minleft says. But the problem is that nothing is
reserving AGFL blocks for those nested extent allocations...

..... because the assumption is that AGFL blocks come from free
space and so when we are at ENOSPC bno/cnt btrees *do no require
splits* so will not consume extra space. Hence allocation at ENOSPC
doesn't need to take into account AGFL block usage because the AGFL
will not be consumed.

Similarly, if we have enough free space records to split a free
space btree block, we have enough free space to refill the AGFL
multiple times and we don't have to reserve space for them.

IOWs, the allocation code has, historically, never had to care about
AGFL refilling when the AG is near ENOSPC as nothing will consume
AGFL blocks when the AG is near empty.

This is the design assumption that AG reservations broke. This is
why I'm asking you to look into taking blocks that are supposedly
reserved for the AGFL, because as reserved space is used, the
bno/cnt btrees will shrink and return those blocks to free space and
hence they are still available for reserved allocations to use as
the real physical ENOSPC condition approaches.

The more I look at this, the more I think overall answer to this
problem is to allow AGFL refilling to ignore AG reserves rather than
causing ENOSPC....

----

Regardless of the above, answers to the rest of you questions follow.

> Please help correct me if my understanding about your ask is wrong.
> 
> > 
> > How many blocks does a BMBT split need to allocate?
> 
> IMO, a full bmbt split can allocate btree level blocks at maximum,
> but if these block allocation cause bno/cnt btree splits, that
> needs more than such blocks.

And how many individual allocations does that require?

> So I think that's why AGFL is needed
> for XFS.  IOWs, that is to prepare enough blocks for bno/cnt splits
> to avoid cyclic dependency.

The AGFL is there to ensure any *one* space allocation succeeds.

> But I'm not sure if the current AGFL reservation works properly
> if multiple allocations must be succeeded in the same AG, see below..)

Right, it does not provide any guarantees across mutliple successive
allocations like an extent + BMBT split chain. That's what
args->minleft is supposed to provide.

However, it does provide the guarantee that when near ENOSPC,
bno/cnt splits and hence AGFL consumption will not occur, thereby
ensuring that if args->minleft is reserved correctly, operation
right up to ENOSPC will work correctly without AGFL reservations
because the AGFL will not be consumed.

Hence my comments above about the problem being the way AG
reservations moved ENOSPC from "AG physically empty" to "AG still
has thousands of free extents but remaining space unavailable to
user data allocation".

> > > > Regardless, I don't see anything wrong with the allocation setup -
> > > > it's telling the allocation code exactly what it needs for
> > > > subsequent BMBT block allocations to succeed (i.e. args->minleft).
> > > 
> > > In the long term, I think the main point is that args->minleft doesn't
> > > have the exact meaning.  I don't know how many blocks should be counted
> > > by args->minleft or other ways.
> > 
> > args->minleft has an *exact* meaning - that the AG must have that
> > many blocks left available for potential btree record insertion
> > allocations after the initial extent is allocated. For inode fork
> > allocations, the BMBT blocks required is defined by
> > xfs_bmapi_minleft(). For inode chunk extent allocation and inobt
> > record insertion, it is defined by the pre-calculated
> > igeo->inobt_maxlevels variable.
> > 
> > IOWs, this "postalloc" concept is redundant - minleft already
> > provides the maximum number of single block allocations that need to
> > have space reserved in the AG for the initial extent allocation to
> > succeed. i.e.  the allocation setup is already taking into account
> > blocks needed for extra allocations within the AG, but that's not
> > being handled correctly by the AG allocation code.
> 
> I don't think it's the case as I described in the patch commit message,
> if we go over the words at the top, the main point is
>  
>  In the first allocation, minleft = 1, the current allocator assumes
>  it can allocate an extent with 27 blocks (the remaining blocks are
>  18276 per-AG reservation, 6 for AGFL reservation, 1 for inode extents
>  -to-btree for the following allocation).
> 
>  But here in order to finish this allocation with 27 blocks, it splits
>  cntbt so that it takes another unexpected block from AGFL, and
>  that wasn't accounted in minleft (or with any other fields) before.
> 
>  I don't think it can be directly described by minleft because
>  such extra bno/cntbt reservation needs more knowledge of bno/cntbt
>  internals (such as current bno/cnt btree levels), so I don't think
>  it should belong to BMBT allocation code at least.
> 
>  So here I introduced another variable to describe the total number
>  of post-allocations, I think it's just enough to resolve the inode
>  extents-to-btree bno/cntbt reservation issue.

extents-to-btree is the degenerate case of a btree split. It's
moving the in-inode extent block to a single btree root block - it's
the same case as having a multi-level BMBT and splitting a single
leaf block during an xfs_btree_insert() call. Both require a second
discrete allocation to be made in the same transaction from the same
AG.

But if that xfs_btree_insert() call triggers a multi-level btree
split, we've now got more than 1 "post allocation" allocation being
done - there's one allocation for every level that needs to have a
block split. To handle this, we'd need to set up this args.postalloc
variable with the number of allocations a btree split might require.

What I'm trying to tell you is that args->minleft is already
configured with exactly this number of blocks/post-allocations that
the btree split might require, and hence allow the allocation code
to select an AG with the right amount of space needed before it
starts.


> > On review, it is quite possible that args->minleft is not being
> > handled by the BMBT and inobt block allocation code correctly.
> > Shouldn't btree block allocation drop args->minleft by 1 for
> > each block that is allocated?
> 
> At least, in order to convert from inode extents-to-btree, we need
> another block for the following allocation, so minleft = 1 here.
> 
> 	if (ifp->if_format != XFS_DINODE_FMT_BTREE)
> 		return 1;

Yes, as I said above, that's the degenerate case where we only need
to allocate a root block and set the btree level to 1.

> So I guess what you meant is
> 	return be16_to_cpu(ifp->if_broot->bb_level) + 1; ?
> 
> I don't know why it has another 1 here,

It's a btree. What does a full height btree split do?

It adds a block to each existing level, and splits the root block
into two. Which means we need to increase the tree height by 1 and
allocate a new root block. IOWs, the number of allocations/blocks
needed by a full split is (current height + 1).

> yet even if we account an
> extra block here, I think it doesn't have some critical result
> since the worst case is that it just returns -ENOSPC in advance.
> 
> But in principle, most users use terabytes XFS, so I think such
> one extra block doesn't matter too much.  I will update this if
> such 1 is meaningless, but it doesn't actually contribute to the
> real shutdown issue.

I think you misunderstood what I was asking. Let's unroll the
extent allocation/BMBT record insert loop:

extent allocation
 args.minleft = bb_level + 1
 xfs_alloc_vextent(args)
bmbt record insert
  xfs_btree_insert()
    leaf split
      xfs_bmbt_alloc_block()
        args.minleft = ???
        xfs_alloc_vextent(args)
    level 1 node split
      xfs_bmbt_alloc_block()
        args.minleft = ???
        xfs_alloc_vextent(args)
    level 2 node split
      xfs_bmbt_alloc_block()
        args.minleft = ???
        xfs_alloc_vextent(args)
    ....
    root split
      xfs_bmbt_alloc_block()
        args.minleft = ???
        xfs_alloc_vextent(args)

A BMBT split results in a chain of individual allocations. What
should args.minleft be set to on each of these allocations, and
what context do we have to ensure it is set correctly? 
So the question I was asking was whether what we are doing with
args->minleft for each allocation in the chain is correct, and
whether they need modification if we have to take into account the
AGFL block refilling that may need to occur after each BMBT block
allocation?

Indeed, if we get the initial extent allocation reservation correct,
does minleft even matter for the rest of the allocations in the
chain?

Looking at xfs_bmbt_alloc_block(), it sets args.minleft = 0 if there
was a previous allocation in the transaction (i.e. args.fsbno !=
NULLFSBLOCK). It assumes that the original extent reservation set
args.minleft appropriately to reserve enough space for all
subsequent calls to xfs_bmbt_alloc_block() in this transaction to
succeed.

Hence, given the way it is implemented right now, all we need to do
is ensure that the initial allocation has all the space reservation
the entire operation may need and the rest is good, yes?

xfs_bmap_extents_to_btree() also sets args->minleft = 0, so as long
as the first allocation in the transaction has reserved enough
blocks in args->minleft it doesn't need any special help, either.

So, yes, you are right that avoiding ENOSPC when running multiple
allocations in a single transaction is all based on the initial
allocation ensuring there is enough space in the AG for all
subsequent allocations to succeed. But there's a lot more to it than
that....

> > > > The problem here is that the internal allocation code is failing to
> > > > handle the corner case where space is just about gone correctly.
> > > > 
> > > > As I pointed out previously - we have a huge amount of reserve space
> > > > available in the AG here, so why not use some of the reserve space
> > > > to get out of this temporary deficit corner case? We can argue that
> > > > it's not really a deficit, either, because moving free blocks to the
> > > > free list still accounts them as unused and free, so could still
> > > > make up part of the unused reservation....
> > > > 
> > > > i.e. is the problem here simply that we don't allow AGFL blocks to
> > > > be considered part of the reserved free space?
> > > 
> > > I don't know how to simply reuse per-AG reservation blocks for this,
> > 
> > I don't know either, which is *why I asked the question*. i.e. I'm
> > asking for you to investigate a potential alternative solution that
> > challenges a design assumption this code makes. i.e. AGBNO and AGCNT
> > btree blocks are considered free space because when we are at ENOSPC
> > they are empty.
> > 
> > However, with this ag reservation code, we can be at ENOSPC when
> > there are still tens of thousands of free extents, and hence the
> > AGBNO and AGCNT btree blocks are used space, not free space. The
> > AGFL accounting is based on AGFL blocks being considered free space,
> > which matches the AG btree blocks being considered free space, and
> > so maybe the root of the problem here is the assumption that AG
> > btree blocks and AGFL blocks are accounted as free space rather than
> > part of this new "reserved space"....
> 
> I have strong feeling that the current per-AG reservation code (or
> AGFL reservation as in xfs_alloc_min_freelist() ) doesn't work
> properly for multiple allocations in the same AG in order to make
> sure such multiple allocations all succeed.
> 
> Also, a wilder question is that I'm not sure why such multiple
> allocations in oneshot _cannot_ be handled with a defer ops as
> some new log intent, so that we don't need to care about minleft
> messy anymore.

We do use intents and deferred ops for BMBT freeing and reflink
based insertion, but those only log changes to individual records in
the btree. They do not record internal btree shape changes at all.
Yes, we could convert normal extent allocation to use these intents
as well, but that doesn't solve the problem of chained allocations
within a single AG.

IOWs, the chain of allocations for a BMBT split I mention above
still exists for record level intents. To handle the btree split
case as a chain of intents involves a whole new level of complexity
and overhead in the btree code, and likely introduces more problems
at ENOSPC than it solves...

Cheers,

Dave.
  

Hi Dave,

On Wed, Nov 16, 2022 at 01:51:06PM +1100, Dave Chinner wrote:
> On Tue, Nov 15, 2022 at 03:57:54PM +0800, Gao Xiang wrote:
> > On Sun, Nov 13, 2022 at 08:45:45AM +1100, Dave Chinner wrote:
> > > On Sat, Nov 12, 2022 at 07:46:33AM +0800, Gao Xiang wrote:
> > > > On Sat, Nov 12, 2022 at 07:39:05AM +1100, Dave Chinner wrote:
> > > > > On Wed, Nov 09, 2022 at 11:48:02AM +0800, Gao Xiang wrote:
> > > > > > diff --git a/fs/xfs/libxfs/xfs_alloc.c b/fs/xfs/libxfs/xfs_alloc.c
> > > > > > index 6261599bb389..684c67310175 100644
> > > > > > --- a/fs/xfs/libxfs/xfs_alloc.c
> > > > > > +++ b/fs/xfs/libxfs/xfs_alloc.c
> > > > > > @@ -2630,7 +2630,12 @@ xfs_alloc_fix_freelist(
> > > > > >  		goto out_agbp_relse;
> > > > > >  	}
> > > > > >  
> > > > > > -	need = xfs_alloc_min_freelist(mp, pag);
> > > > > > +	/
> > > > > > +	 * Also need to fulfill freespace btree splits by reservaing more
> > > > > > +	 * blocks to perform multiple allocations from a single AG and
> > > > > > +	 * transaction if needed.
> > > > > > +	 */
> > > > > > +	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
> > > > > >  	if (!xfs_alloc_space_available(args, need, flags |
> > > > > >  			XFS_ALLOC_FLAG_CHECK))
> > > > > >  		goto out_agbp_relse;
> > > > > > @@ -2654,7 +2659,7 @@ xfs_alloc_fix_freelist(
> > > > > >  		xfs_agfl_reset(tp, agbp, pag);
> > > > > >  
> > > > > >  	/* If there isn't enough total space or single-extent, reject it. */
> > > > > > -	need = xfs_alloc_min_freelist(mp, pag);
> > > > > > +	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
> > > > > >  	if (!xfs_alloc_space_available(args, need, flags))
> > > > > >  		goto out_agbp_relse;
> > > > > >  
> > > > > > diff --git a/fs/xfs/libxfs/xfs_alloc.h b/fs/xfs/libxfs/xfs_alloc.h
> > > > > > index 2c3f762dfb58..be7f15d6a40d 100644
> > > > > > --- a/fs/xfs/libxfs/xfs_alloc.h
> > > > > > +++ b/fs/xfs/libxfs/xfs_alloc.h
> > > > > > @@ -73,6 +73,7 @@ typedef struct xfs_alloc_arg {
> > > > > >  	int		datatype;	/* mask defining data type treatment */
> > > > > >  	char		wasdel;		/* set if allocation was prev delayed */
> > > > > >  	char		wasfromfl;	/* set if allocation is from freelist */
> > > > > > +	bool		postallocs;	/* number of post-allocations */
> > > > > >  	struct xfs_owner_info	oinfo;	/* owner of blocks being allocated */
> > > > > >  	enum xfs_ag_resv_type	resv;	/* block reservation to use */
> > > > > >  #ifdef DEBUG
> > > > > > diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c
> > > > > > index 49d0d4ea63fc..ed92c6a314b6 100644
> > > > > > --- a/fs/xfs/libxfs/xfs_bmap.c
> > > > > > +++ b/fs/xfs/libxfs/xfs_bmap.c
> > > > > > @@ -3497,6 +3497,7 @@ xfs_bmap_exact_minlen_extent_alloc(
> > > > > >  	args.alignment = 1;
> > > > > >  	args.minalignslop = 0;
> > > > > >  
> > > > > > +	args.postallocs = 1;
> > > > > >  	args.minleft = ap->minleft;
> > > > > >  	args.wasdel = ap->wasdel;
> > > > > >  	args.resv = XFS_AG_RESV_NONE;
> > > > > > @@ -3658,6 +3659,7 @@ xfs_bmap_btalloc(
> > > > > >  		args.alignment = 1;
> > > > > >  		args.minalignslop = 0;
> > > > > >  	}
> > > > > > +	args.postallocs = 1;
> > > > > >  	args.minleft = ap->minleft;
> > > > > >  	args.wasdel = ap->wasdel;
> > > > > >  	args.resv = XFS_AG_RESV_NONE;
> > > > > 
> > > > > That's not going to work. What happens when we do a full bno
> > > > > split? Or we do both a bno and a cnt split in the same allocation?
> > > > 
> > > > I'm not sure if I got your point or not. I think it reserves another
> > > > full splits in the first allocation by doing:
> > > > 
> > > > 	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->postallocs);
> > > > 
> > > > as I wrote above.
> > > 
> > > You're changing the BMBT reservation code. If the first "post-extent
> > > BMBT block allocation" does a full split of both the bno/cnt trees,
> > > then this uses all the AGFL reservations made.
> > 
> > Emmm... I have to align my understanding of this first, I think one
> > example of what you meant is
> >   1. allocate an extent for an inode with minleft = 1;
> >   2. then do extents-to-btree allocation with one block, even minleft
> >      was reserved as 1 in the previous allocation but such one-block
> >      allocation from non-AGFL can cause full bno/cnt splits, which
> >      could takes xfs_alloc_min_freelist() blocks from AGFL and could
> >      take up all AGFL blocks?
> >
> > If my understanding above is like what you said, I think the current
> > codebase may also have a chance to eat up all AGFL blocks in the first
> > allocation since more agfl blocks are only filled in
> > xfs_alloc_fix_freelist(), but later xfs_alloc_ag_vextent() could
> > cause full bno/cnt splits as well?
> 

Thanks for your detailed reply.

Sorry for late reply.  I pinged you on IRC last Friday but seems you are
busy, so I try to reply here as well.

> Yes, the second allocation here might only require 1 block, which is
> what args->minleft says. But the problem is that nothing is
> reserving AGFL blocks for those nested extent allocations...

Yeah, that is also what I meant.

> 
> ..... because the assumption is that AGFL blocks come from free
> space and so when we are at ENOSPC bno/cnt btrees *do no require
> splits* so will not consume extra space. Hence allocation at ENOSPC
> doesn't need to take into account AGFL block usage because the AGFL
> will not be consumed.

I noticed another thing.  I think the reason why the first allocation
in this case caused a cntbt split is that Zorro's workload set
sunit/swidth.  Therefore, due to align requirement, I assume it
called xfs_alloc_fix_len() to fix up agbno and len.

Actually I found our workload has the similar sunit/swidth setup and
I am thinking about this these days.  One thing is that why we need
freespace btree splits when consuming free blocks.

Another thing is that considering we're near ENOSPC, and bno/cnt
btrees has only a few records.  If we allocates without alignment,
I also think bno/cnt btrees do no require splits so it will not
consume extra space since the overall extents only decrease.

Yet how about allocating with alignment? It seems that it can add
another free extent in order to fulfill the alignment.  I'm not sure
if it can cause some corner cases here.

> 
> Similarly, if we have enough free space records to split a free
> space btree block, we have enough free space to refill the AGFL
> multiple times and we don't have to reserve space for them.
> 
> IOWs, the allocation code has, historically, never had to care about
> AGFL refilling when the AG is near ENOSPC as nothing will consume
> AGFL blocks when the AG is near empty.
> 
> This is the design assumption that AG reservations broke. This is
> why I'm asking you to look into taking blocks that are supposedly
> reserved for the AGFL, because as reserved space is used, the
> bno/cnt btrees will shrink and return those blocks to free space and
> hence they are still available for reserved allocations to use as
> the real physical ENOSPC condition approaches.

Yeah, intuitively I also imagine like what you said.  However, does it
have strictly monotonicity, especially with stripe alignment setup?

> 
> The more I look at this, the more I think overall answer to this
> problem is to allow AGFL refilling to ignore AG reserves rather than
> causing ENOSPC....

Could you give more details how to fit this case?  Also we have a
short talk last Wednesday (sorry that I had an urgent thing at that
time).  You mentioned "the simple solution is something like
min(ag reservation blocks, needed AGFL blocks) instead of accounting
them separately", could you give an example for this case as well?


Nevertheless, I wonder if `need` now can be fixed up as
	need = xfs_alloc_min_freelist(mp, pag) * (1 + args->minleft);

> 
> ----
> 
> Regardless of the above, answers to the rest of you questions follow.
> 
> > Please help correct me if my understanding about your ask is wrong.
> > 
> > > 
> > > How many blocks does a BMBT split need to allocate?
> > 
> > IMO, a full bmbt split can allocate btree level blocks at maximum,
> > but if these block allocation cause bno/cnt btree splits, that
> > needs more than such blocks.
> 
> And how many individual allocations does that require?

ok, you're right, so args->minleft may be enough.

> 
> > So I think that's why AGFL is needed
> > for XFS.  IOWs, that is to prepare enough blocks for bno/cnt splits
> > to avoid cyclic dependency.
> 
> The AGFL is there to ensure any *one* space allocation succeeds.
> 
> > But I'm not sure if the current AGFL reservation works properly
> > if multiple allocations must be succeeded in the same AG, see below..)
> 
> Right, it does not provide any guarantees across mutliple successive
> allocations like an extent + BMBT split chain. That's what
> args->minleft is supposed to provide.
> 
> However, it does provide the guarantee that when near ENOSPC,
> bno/cnt splits and hence AGFL consumption will not occur, thereby
> ensuring that if args->minleft is reserved correctly, operation
> right up to ENOSPC will work correctly without AGFL reservations
> because the AGFL will not be consumed.
> 
> Hence my comments above about the problem being the way AG
> reservations moved ENOSPC from "AG physically empty" to "AG still
> has thousands of free extents but remaining space unavailable to
> user data allocation".

Partially because of that, the main reason I think may be due to
stripe alignment.

> 
> > > > > Regardless, I don't see anything wrong with the allocation setup -
> > > > > it's telling the allocation code exactly what it needs for
> > > > > subsequent BMBT block allocations to succeed (i.e. args->minleft).
> > > > 
> > > > In the long term, I think the main point is that args->minleft doesn't
> > > > have the exact meaning.  I don't know how many blocks should be counted
> > > > by args->minleft or other ways.
> > > 
> > > args->minleft has an *exact* meaning - that the AG must have that
> > > many blocks left available for potential btree record insertion
> > > allocations after the initial extent is allocated. For inode fork
> > > allocations, the BMBT blocks required is defined by
> > > xfs_bmapi_minleft(). For inode chunk extent allocation and inobt
> > > record insertion, it is defined by the pre-calculated
> > > igeo->inobt_maxlevels variable.
> > > 
> > > IOWs, this "postalloc" concept is redundant - minleft already
> > > provides the maximum number of single block allocations that need to
> > > have space reserved in the AG for the initial extent allocation to
> > > succeed. i.e.  the allocation setup is already taking into account
> > > blocks needed for extra allocations within the AG, but that's not
> > > being handled correctly by the AG allocation code.
> > 
> > I don't think it's the case as I described in the patch commit message,
> > if we go over the words at the top, the main point is
> >  
> >  In the first allocation, minleft = 1, the current allocator assumes
> >  it can allocate an extent with 27 blocks (the remaining blocks are
> >  18276 per-AG reservation, 6 for AGFL reservation, 1 for inode extents
> >  -to-btree for the following allocation).
> > 
> >  But here in order to finish this allocation with 27 blocks, it splits
> >  cntbt so that it takes another unexpected block from AGFL, and
> >  that wasn't accounted in minleft (or with any other fields) before.
> > 
> >  I don't think it can be directly described by minleft because
> >  such extra bno/cntbt reservation needs more knowledge of bno/cntbt
> >  internals (such as current bno/cnt btree levels), so I don't think
> >  it should belong to BMBT allocation code at least.
> > 
> >  So here I introduced another variable to describe the total number
> >  of post-allocations, I think it's just enough to resolve the inode
> >  extents-to-btree bno/cntbt reservation issue.
> 
> extents-to-btree is the degenerate case of a btree split. It's
> moving the in-inode extent block to a single btree root block - it's
> the same case as having a multi-level BMBT and splitting a single
> leaf block during an xfs_btree_insert() call. Both require a second
> discrete allocation to be made in the same transaction from the same
> AG.
> 
> But if that xfs_btree_insert() call triggers a multi-level btree
> split, we've now got more than 1 "post allocation" allocation being
> done - there's one allocation for every level that needs to have a
> block split. To handle this, we'd need to set up this args.postalloc
> variable with the number of allocations a btree split might require.
> 
> What I'm trying to tell you is that args->minleft is already
> configured with exactly this number of blocks/post-allocations that
> the btree split might require, and hence allow the allocation code
> to select an AG with the right amount of space needed before it
> starts.

Yeah, you are right.

> 
> 
> > > On review, it is quite possible that args->minleft is not being
> > > handled by the BMBT and inobt block allocation code correctly.
> > > Shouldn't btree block allocation drop args->minleft by 1 for
> > > each block that is allocated?
> > 
> > At least, in order to convert from inode extents-to-btree, we need
> > another block for the following allocation, so minleft = 1 here.
> > 
> > 	if (ifp->if_format != XFS_DINODE_FMT_BTREE)
> > 		return 1;
> 
> Yes, as I said above, that's the degenerate case where we only need
> to allocate a root block and set the btree level to 1.
> 
> > So I guess what you meant is
> > 	return be16_to_cpu(ifp->if_broot->bb_level) + 1; ?
> > 
> > I don't know why it has another 1 here,
> 
> It's a btree. What does a full height btree split do?
> 
> It adds a block to each existing level, and splits the root block
> into two. Which means we need to increase the tree height by 1 and
> allocate a new root block. IOWs, the number of allocations/blocks
> needed by a full split is (current height + 1).

Agreed, sorry for missing that point.

> 
> > yet even if we account an
> > extra block here, I think it doesn't have some critical result
> > since the worst case is that it just returns -ENOSPC in advance.
> > 
> > But in principle, most users use terabytes XFS, so I think such
> > one extra block doesn't matter too much.  I will update this if
> > such 1 is meaningless, but it doesn't actually contribute to the
> > real shutdown issue.
> 
> I think you misunderstood what I was asking. Let's unroll the
> extent allocation/BMBT record insert loop:
> 
> extent allocation
>  args.minleft = bb_level + 1
>  xfs_alloc_vextent(args)
> bmbt record insert
>   xfs_btree_insert()
>     leaf split
>       xfs_bmbt_alloc_block()
>         args.minleft = ???
>         xfs_alloc_vextent(args)
>     level 1 node split
>       xfs_bmbt_alloc_block()
>         args.minleft = ???
>         xfs_alloc_vextent(args)
>     level 2 node split
>       xfs_bmbt_alloc_block()
>         args.minleft = ???
>         xfs_alloc_vextent(args)
>     ....
>     root split
>       xfs_bmbt_alloc_block()
>         args.minleft = ???
>         xfs_alloc_vextent(args)
> 
> A BMBT split results in a chain of individual allocations. What
> should args.minleft be set to on each of these allocations, and
> what context do we have to ensure it is set correctly? 
> So the question I was asking was whether what we are doing with
> args->minleft for each allocation in the chain is correct, and
> whether they need modification if we have to take into account the
> AGFL block refilling that may need to occur after each BMBT block
> allocation?
> 
> Indeed, if we get the initial extent allocation reservation correct,
> does minleft even matter for the rest of the allocations in the
> chain?
> 
> Looking at xfs_bmbt_alloc_block(), it sets args.minleft = 0 if there
> was a previous allocation in the transaction (i.e. args.fsbno !=
> NULLFSBLOCK). It assumes that the original extent reservation set
> args.minleft appropriately to reserve enough space for all
> subsequent calls to xfs_bmbt_alloc_block() in this transaction to
> succeed.
> 
> Hence, given the way it is implemented right now, all we need to do
> is ensure that the initial allocation has all the space reservation
> the entire operation may need and the rest is good, yes?
> 
> xfs_bmap_extents_to_btree() also sets args->minleft = 0, so as long
> as the first allocation in the transaction has reserved enough
> blocks in args->minleft it doesn't need any special help, either.
> 
> So, yes, you are right that avoiding ENOSPC when running multiple
> allocations in a single transaction is all based on the initial
> allocation ensuring there is enough space in the AG for all
> subsequent allocations to succeed. But there's a lot more to it than
> that....

Yeah..

> 
> > > > > The problem here is that the internal allocation code is failing to
> > > > > handle the corner case where space is just about gone correctly.
> > > > > 
> > > > > As I pointed out previously - we have a huge amount of reserve space
> > > > > available in the AG here, so why not use some of the reserve space
> > > > > to get out of this temporary deficit corner case? We can argue that
> > > > > it's not really a deficit, either, because moving free blocks to the
> > > > > free list still accounts them as unused and free, so could still
> > > > > make up part of the unused reservation....
> > > > > 
> > > > > i.e. is the problem here simply that we don't allow AGFL blocks to
> > > > > be considered part of the reserved free space?
> > > > 
> > > > I don't know how to simply reuse per-AG reservation blocks for this,
> > > 
> > > I don't know either, which is *why I asked the question*. i.e. I'm
> > > asking for you to investigate a potential alternative solution that
> > > challenges a design assumption this code makes. i.e. AGBNO and AGCNT
> > > btree blocks are considered free space because when we are at ENOSPC
> > > they are empty.
> > > 
> > > However, with this ag reservation code, we can be at ENOSPC when
> > > there are still tens of thousands of free extents, and hence the
> > > AGBNO and AGCNT btree blocks are used space, not free space. The
> > > AGFL accounting is based on AGFL blocks being considered free space,
> > > which matches the AG btree blocks being considered free space, and
> > > so maybe the root of the problem here is the assumption that AG
> > > btree blocks and AGFL blocks are accounted as free space rather than
> > > part of this new "reserved space"....
> > 
> > I have strong feeling that the current per-AG reservation code (or
> > AGFL reservation as in xfs_alloc_min_freelist() ) doesn't work
> > properly for multiple allocations in the same AG in order to make
> > sure such multiple allocations all succeed.
> > 
> > Also, a wilder question is that I'm not sure why such multiple
> > allocations in oneshot _cannot_ be handled with a defer ops as
> > some new log intent, so that we don't need to care about minleft
> > messy anymore.
> 
> We do use intents and deferred ops for BMBT freeing and reflink
> based insertion, but those only log changes to individual records in
> the btree. They do not record internal btree shape changes at all.
> Yes, we could convert normal extent allocation to use these intents
> as well, but that doesn't solve the problem of chained allocations
> within a single AG.
> 
> IOWs, the chain of allocations for a BMBT split I mention above
> still exists for record level intents. To handle the btree split
> case as a chain of intents involves a whole new level of complexity
> and overhead in the btree code, and likely introduces more problems
> at ENOSPC than it solves...

My question was that if we convert some allocations into dfops, does
inode extents-to-btree needs to be strictly allocated in this AG
anymore? ... Does that tend to be a long-term plan?


Sorry I'm not good at replying a long email, hopefully reflect what I'm
thinking.

Thanks,
Gao Xiang

> 
> Cheers,
> 
> Dave.
> -- 
> Dave Chinner
> david@fromorbit.com
  

please be noted we noticed Gao Xiang and Dave Chinner have already had lots of
discussion around this patch, which seems there is maybe new version later.
we just sent out this report FYI the possible performance impact of this patch.


Greeting,

FYI, we noticed a -15.1% regression of fxmark.ssd_xfs_MWCM_72_directio.works/sec due to commit:


commit: ada76f94c5b32c1828955d70f692b111a9ec2d33 ("[PATCH] xfs: account extra freespace btree splits for multiple allocations")
url: https://github.com/intel-lab-lkp/linux/commits/Gao-Xiang/xfs-account-extra-freespace-btree-splits-for-multiple-allocations/20221109-114953
base: https://git.kernel.org/cgit/fs/xfs/xfs-linux.git for-next
patch link: https://lore.kernel.org/all/20221109034802.40322-1-hsiangkao@linux.alibaba.com/
patch subject: [PATCH] xfs: account extra freespace btree splits for multiple allocations

in testcase: fxmark
on test machine: 128 threads 2 sockets Intel(R) Xeon(R) Platinum 8358 CPU @ 2.60GHz (Ice Lake) with 128G memory
with following parameters:

	disk: 1SSD
	media: ssd
	test: MWCM
	fstype: xfs
	directio: directio
	cpufreq_governor: performance

test-description: FxMark is a filesystem benchmark that test multicore scalability.
test-url: https://github.com/sslab-gatech/fxmark



If you fix the issue, kindly add following tag
| Reported-by: kernel test robot <oliver.sang@intel.com>
| Link: https://lore.kernel.org/oe-lkp/202211220854.48dad6fd-oliver.sang@intel.com


Details are as below:
-------------------------------------------------------------------------------------------------->


To reproduce:

        git clone https://github.com/intel/lkp-tests.git
        cd lkp-tests
        sudo bin/lkp install job.yaml           # job file is attached in this email
        bin/lkp split-job --compatible job.yaml # generate the yaml file for lkp run
        sudo bin/lkp run generated-yaml-file

        # if come across any failure that blocks the test,
        # please remove ~/.lkp and /lkp dir to run from a clean state.

=========================================================================================
compiler/cpufreq_governor/directio/disk/fstype/kconfig/media/rootfs/tbox_group/test/testcase:
  gcc-11/performance/directio/1SSD/xfs/x86_64-rhel-8.3/ssd/debian-11.1-x86_64-20220510.cgz/lkp-icl-2sp5/MWCM/fxmark

commit: 
  4eb559dd15 ("Merge tag 'refcount-cow-domain-6.1_2022-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.1-fixesA")
  ada76f94c5 ("xfs: account extra freespace btree splits for multiple allocations")

4eb559dd15671cca ada76f94c5b32c1828955d70f69 
---------------- --------------------------- 
         %stddev     %change         %stddev
             \          |                \  
    260.92           +90.8%     497.93 ± 13%  fxmark.ssd_xfs_MWCM_18_directio.idle_sec
     29.10           +91.5%      55.74 ± 14%  fxmark.ssd_xfs_MWCM_18_directio.idle_util
      9.11 ±  2%     -17.6%       7.51 ±  8%  fxmark.ssd_xfs_MWCM_18_directio.iowait_sec
      1.02 ±  2%     -17.3%       0.84 ±  8%  fxmark.ssd_xfs_MWCM_18_directio.iowait_util
    617.96           -38.8%     378.15 ± 19%  fxmark.ssd_xfs_MWCM_18_directio.sys_sec
     68.93           -38.6%      42.31 ± 18%  fxmark.ssd_xfs_MWCM_18_directio.sys_util
      1.80 ±  4%     -18.5%       1.47 ±  5%  fxmark.ssd_xfs_MWCM_18_directio.user_sec
      0.20 ±  4%     -18.2%       0.16 ±  4%  fxmark.ssd_xfs_MWCM_18_directio.user_util
   3363535           -29.6%    2369575 ±  7%  fxmark.ssd_xfs_MWCM_18_directio.works
     67262           -29.6%      47384 ±  7%  fxmark.ssd_xfs_MWCM_18_directio.works/sec
      0.01 ±111%  +51925.0%       3.47 ±  9%  fxmark.ssd_xfs_MWCM_1_directio.idle_sec
      0.01 ±111%  +52382.0%       6.99 ±  9%  fxmark.ssd_xfs_MWCM_1_directio.idle_util
      0.23 ± 14%   +1481.9%       3.64 ± 14%  fxmark.ssd_xfs_MWCM_1_directio.iowait_sec
      0.46 ± 14%   +1496.0%       7.33 ± 14%  fxmark.ssd_xfs_MWCM_1_directio.iowait_util
      0.58           +20.9%       0.70 ±  2%  fxmark.ssd_xfs_MWCM_1_directio.irq_sec
      1.15           +21.9%       1.40 ±  2%  fxmark.ssd_xfs_MWCM_1_directio.irq_util
      0.37 ±  2%     +18.9%       0.44 ±  5%  fxmark.ssd_xfs_MWCM_1_directio.softirq_sec
      0.74 ±  2%     +20.0%       0.89 ±  5%  fxmark.ssd_xfs_MWCM_1_directio.softirq_util
     47.70           -15.4%      40.33 ±  2%  fxmark.ssd_xfs_MWCM_1_directio.sys_sec
     95.24           -14.7%      81.24 ±  2%  fxmark.ssd_xfs_MWCM_1_directio.sys_util
      1.20 ±  5%     -11.0%       1.07 ±  4%  fxmark.ssd_xfs_MWCM_1_directio.user_sec
      2.40 ±  6%     -10.2%       2.15 ±  4%  fxmark.ssd_xfs_MWCM_1_directio.user_util
   2639345           -15.6%    2228369 ±  4%  fxmark.ssd_xfs_MWCM_1_directio.works
     52786           -15.6%      44567 ±  4%  fxmark.ssd_xfs_MWCM_1_directio.works/sec
      4.11 ±  3%    +254.5%      14.56 ± 18%  fxmark.ssd_xfs_MWCM_2_directio.idle_sec
      4.10 ±  3%    +255.9%      14.60 ± 18%  fxmark.ssd_xfs_MWCM_2_directio.idle_util
      1.42 ±  6%    +435.2%       7.57 ±  6%  fxmark.ssd_xfs_MWCM_2_directio.iowait_sec
      1.41 ±  6%    +437.2%       7.59 ±  6%  fxmark.ssd_xfs_MWCM_2_directio.iowait_util
      0.82           +20.2%       0.99 ±  4%  fxmark.ssd_xfs_MWCM_2_directio.irq_sec
      0.82           +20.7%       0.99 ±  4%  fxmark.ssd_xfs_MWCM_2_directio.irq_util
      0.52 ±  4%     +30.0%       0.67 ±  4%  fxmark.ssd_xfs_MWCM_2_directio.softirq_sec
      0.52 ±  4%     +30.5%       0.67 ±  4%  fxmark.ssd_xfs_MWCM_2_directio.softirq_util
     91.86           -18.6%      74.82 ±  4%  fxmark.ssd_xfs_MWCM_2_directio.sys_sec
     91.73           -18.3%      74.99 ±  4%  fxmark.ssd_xfs_MWCM_2_directio.sys_util
      1.42 ±  4%     -18.7%       1.15 ±  4%  fxmark.ssd_xfs_MWCM_2_directio.user_sec
      1.42 ±  4%     -18.4%       1.16 ±  4%  fxmark.ssd_xfs_MWCM_2_directio.user_util
   3159498           -23.2%    2425056 ±  5%  fxmark.ssd_xfs_MWCM_2_directio.works
     63189           -23.3%      48486 ±  5%  fxmark.ssd_xfs_MWCM_2_directio.works/sec
    413.60 ±  4%    +103.5%     841.63 ± 20%  fxmark.ssd_xfs_MWCM_36_directio.idle_sec
     22.94 ±  4%    +103.9%      46.78 ± 20%  fxmark.ssd_xfs_MWCM_36_directio.idle_util
      1364           -31.6%     933.33 ± 19%  fxmark.ssd_xfs_MWCM_36_directio.sys_sec
     75.70           -31.5%      51.85 ± 18%  fxmark.ssd_xfs_MWCM_36_directio.sys_util
      1.82 ±  4%     -11.7%       1.60 ±  5%  fxmark.ssd_xfs_MWCM_36_directio.user_sec
      0.10 ±  4%     -11.5%       0.09 ±  5%  fxmark.ssd_xfs_MWCM_36_directio.user_util
   2850816           -22.9%    2197955 ±  7%  fxmark.ssd_xfs_MWCM_36_directio.works
     57006           -22.9%      43943 ±  7%  fxmark.ssd_xfs_MWCM_36_directio.works/sec
     54.22           +63.5%      88.65 ±  2%  fxmark.ssd_xfs_MWCM_4_directio.idle_sec
     27.33           +64.7%      45.02 ±  2%  fxmark.ssd_xfs_MWCM_4_directio.idle_util
      6.53           +36.1%       8.89 ±  8%  fxmark.ssd_xfs_MWCM_4_directio.iowait_sec
      3.29           +37.1%       4.51 ±  8%  fxmark.ssd_xfs_MWCM_4_directio.iowait_util
      1.37           +21.7%       1.67 ±  3%  fxmark.ssd_xfs_MWCM_4_directio.irq_sec
      0.69           +22.6%       0.85 ±  3%  fxmark.ssd_xfs_MWCM_4_directio.irq_util
      0.64           +20.3%       0.77 ±  3%  fxmark.ssd_xfs_MWCM_4_directio.softirq_sec
      0.32           +21.2%       0.39 ±  3%  fxmark.ssd_xfs_MWCM_4_directio.softirq_util
    134.06           -28.6%      95.67 ±  2%  fxmark.ssd_xfs_MWCM_4_directio.sys_sec
     67.58           -28.1%      48.59 ±  2%  fxmark.ssd_xfs_MWCM_4_directio.sys_util
      1.55 ±  2%     -18.4%       1.26 ±  5%  fxmark.ssd_xfs_MWCM_4_directio.user_sec
      0.78 ±  2%     -17.8%       0.64 ±  5%  fxmark.ssd_xfs_MWCM_4_directio.user_util
   3262962           -26.9%    2383952        fxmark.ssd_xfs_MWCM_4_directio.works
     65256           -26.9%      47670        fxmark.ssd_xfs_MWCM_4_directio.works/sec
    489.98 ±  3%    +160.6%       1277 ± 24%  fxmark.ssd_xfs_MWCM_54_directio.idle_sec
     18.11 ±  3%    +161.0%      47.27 ± 24%  fxmark.ssd_xfs_MWCM_54_directio.idle_util
      2185           -36.3%       1391 ± 22%  fxmark.ssd_xfs_MWCM_54_directio.sys_sec
     80.77           -36.2%      51.49 ± 22%  fxmark.ssd_xfs_MWCM_54_directio.sys_util
   2448443           -24.0%    1859708 ±  9%  fxmark.ssd_xfs_MWCM_54_directio.works
     48963           -24.1%      37175 ±  9%  fxmark.ssd_xfs_MWCM_54_directio.works/sec
    614.60 ±  2%     +88.5%       1158 ±  9%  fxmark.ssd_xfs_MWCM_72_directio.idle_sec
     17.04 ±  2%     +88.6%      32.13 ±  9%  fxmark.ssd_xfs_MWCM_72_directio.idle_util
      6.44 ±  4%     -14.8%       5.48 ±  9%  fxmark.ssd_xfs_MWCM_72_directio.iowait_sec
      0.18 ±  4%     -14.8%       0.15 ± 10%  fxmark.ssd_xfs_MWCM_72_directio.iowait_util
      2953           -18.5%       2407 ±  4%  fxmark.ssd_xfs_MWCM_72_directio.sys_sec
     81.89           -18.5%      66.77 ±  4%  fxmark.ssd_xfs_MWCM_72_directio.sys_util
   2279692           -15.1%    1935171 ±  2%  fxmark.ssd_xfs_MWCM_72_directio.works
     45589           -15.1%      38687 ±  2%  fxmark.ssd_xfs_MWCM_72_directio.works/sec
    934.32           -10.3%     838.20        fxmark.time.elapsed_time
    934.32           -10.3%     838.20        fxmark.time.elapsed_time.max
  43490089           -20.8%   34446960 ±  3%  fxmark.time.file_system_outputs
    128601 ±  3%     -31.6%      87922 ±  4%  fxmark.time.involuntary_context_switches
     31.83           -17.8%      26.17 ±  5%  fxmark.time.percent_of_cpu_this_job_got
    301.24           -26.5%     221.43 ±  5%  fxmark.time.system_time
    841264 ±  3%     -11.2%     747133 ±  5%  fxmark.time.voluntary_context_switches
    989.01            -9.6%     893.57        uptime.boot
     54.77           +10.7%      60.61        iostat.cpu.idle
      5.31 ±  4%     +21.4%       6.45 ±  4%  iostat.cpu.iowait
     38.42           -18.0%      31.51 ±  2%  iostat.cpu.system
     55.66            +5.8       61.45        mpstat.cpu.all.idle%
      5.31 ±  5%      +1.2        6.46 ±  4%  mpstat.cpu.all.iowait%
      0.60 ±  2%      -0.1        0.53        mpstat.cpu.all.soft%
     36.50            -6.6       29.87 ±  3%  mpstat.cpu.all.sys%
  26496967           -20.9%   20947493 ±  2%  numa-numastat.node0.local_node
  26548700           -20.8%   21022864 ±  2%  numa-numastat.node0.numa_hit
   3332141 ±  6%     -22.1%    2595871 ±  4%  numa-numastat.node1.local_node
   3400117 ±  5%     -22.4%    2638708 ±  5%  numa-numastat.node1.numa_hit
      2211            +1.0%       2233        perf-stat.i.minor-faults
      0.39 ±  9%      +0.1        0.44 ±  3%  perf-stat.i.node-load-miss-rate%
      2211            +1.0%       2233        perf-stat.i.page-faults
      2209            +1.0%       2230        perf-stat.ps.minor-faults
      2209            +1.0%       2230        perf-stat.ps.page-faults
     53.83           +11.5%      60.00        vmstat.cpu.id
      5430 ±  2%     -14.0%       4668 ±  3%  vmstat.io.bi
    123556            -8.3%     113294 ±  2%  vmstat.io.bo
  11181852           -16.7%    9318758 ±  2%  vmstat.memory.cache
      7.67 ±  6%     -19.6%       6.17 ± 11%  vmstat.procs.r
   9247281           -15.1%    7847381        meminfo.Cached
   3299044 ±  2%     -21.5%    2591082 ±  2%  meminfo.Dirty
   5715841 ±  2%     -24.4%    4320653 ±  3%  meminfo.Inactive
   5389224 ±  2%     -25.9%    3991807 ±  3%  meminfo.Inactive(file)
   1914390           -24.3%    1449759 ±  3%  meminfo.KReclaimable
     31406 ± 13%     -22.0%      24510 ±  7%  meminfo.KernelStack
  14111361           -16.6%   11775228 ±  2%  meminfo.Memused
   1914390           -24.3%    1449759 ±  3%  meminfo.SReclaimable
   1427015           -25.6%    1061962 ±  4%  meminfo.SUnreclaim
     18397 ±  2%      -8.4%      16846        meminfo.Shmem
   3341406           -24.8%    2511722 ±  3%  meminfo.Slab
  24035030           -18.6%   19557858 ±  2%  meminfo.max_used_kB
      1.23 ± 22%      +0.4        1.58 ± 18%  perf-profile.calltrace.cycles-pp.xlog_cil_push_work.process_one_work.worker_thread.kthread.ret_from_fork
      0.76 ± 44%      -0.4        0.38 ± 74%  perf-profile.children.cycles-pp.rcu_sched_clock_irq
      0.09 ± 10%      -0.0        0.05 ± 47%  perf-profile.children.cycles-pp.mod_find
      0.10 ± 47%      +0.1        0.18 ± 26%  perf-profile.children.cycles-pp.xfs_iext_lookup_extent
      0.17 ± 26%      +0.1        0.25 ± 16%  perf-profile.children.cycles-pp.s_show
      0.05 ± 82%      +0.1        0.13 ± 46%  perf-profile.children.cycles-pp.timekeeping_advance
      0.05 ± 82%      +0.1        0.13 ± 46%  perf-profile.children.cycles-pp.update_wall_time
      0.21 ± 21%      +0.1        0.31 ± 20%  perf-profile.children.cycles-pp.vsnprintf
      0.20 ± 26%      +0.1        0.30 ± 17%  perf-profile.children.cycles-pp.seq_printf
      1.23 ± 22%      +0.4        1.58 ± 18%  perf-profile.children.cycles-pp.xlog_cil_push_work
      0.08 ± 14%      -0.0        0.04 ± 72%  perf-profile.self.cycles-pp.mod_find
      0.14 ± 26%      +0.1        0.22 ± 16%  perf-profile.self.cycles-pp.xlog_cil_push_work
      0.13 ± 37%      +0.1        0.21 ± 22%  perf-profile.self.cycles-pp.__folio_end_writeback
      1339 ±  6%     -12.1%       1177 ±  6%  numa-meminfo.node0.Active
      1317 ±  4%     -10.6%       1177 ±  6%  numa-meminfo.node0.Active(anon)
   2938921 ±  2%     -22.3%    2284083 ±  2%  numa-meminfo.node0.Dirty
   4950896 ±  2%     -25.3%    3699254 ±  2%  numa-meminfo.node0.Inactive
   4806022 ±  2%     -27.0%    3510366 ±  3%  numa-meminfo.node0.Inactive(file)
   1663428 ±  2%     -25.0%    1246833 ±  3%  numa-meminfo.node0.KReclaimable
     15585 ±  4%     -12.4%      13655 ±  4%  numa-meminfo.node0.KernelStack
   1663428 ±  2%     -25.0%    1246833 ±  3%  numa-meminfo.node0.SReclaimable
   1224137 ±  2%     -25.5%     912586 ±  4%  numa-meminfo.node0.SUnreclaim
     15785 ±  5%     -12.5%      13811 ±  4%  numa-meminfo.node0.Shmem
   2887566           -25.2%    2159421 ±  3%  numa-meminfo.node0.Slab
    358435 ±  3%     -14.3%     307335 ±  6%  numa-meminfo.node1.Dirty
    764404 ±  6%     -18.6%     622071 ± 10%  numa-meminfo.node1.Inactive
    582651 ±  2%     -17.3%     482089 ±  9%  numa-meminfo.node1.Inactive(file)
    250653 ± 10%     -18.9%     203397 ± 13%  numa-meminfo.node1.KReclaimable
   3410163 ± 54%     -26.4%    2508459 ± 68%  numa-meminfo.node1.MemUsed
    250653 ± 10%     -18.9%     203397 ± 13%  numa-meminfo.node1.SReclaimable
    202812 ± 17%     -26.2%     149763 ±  5%  numa-meminfo.node1.SUnreclaim
    453467 ±  9%     -22.1%     353161 ±  8%  numa-meminfo.node1.Slab
      0.71 ± 14%     -21.5%       0.56 ± 14%  sched_debug.cfs_rq:/.h_nr_running.avg
      1405 ± 55%     -68.3%     445.08 ± 27%  sched_debug.cfs_rq:/.load_avg.avg
   5023746           -33.8%    3324248 ± 13%  sched_debug.cfs_rq:/.min_vruntime.avg
   5080937           -33.2%    3395209 ± 12%  sched_debug.cfs_rq:/.min_vruntime.max
   4683128           -31.3%    3217873 ± 13%  sched_debug.cfs_rq:/.min_vruntime.min
      0.59 ±  9%     -17.4%       0.49 ± 18%  sched_debug.cfs_rq:/.nr_running.avg
    650.51 ± 13%     -32.3%     440.38 ±  9%  sched_debug.cfs_rq:/.runnable_avg.avg
      1007 ±  8%     -18.5%     821.27 ±  6%  sched_debug.cfs_rq:/.runnable_avg.max
    476.07 ± 17%     -38.7%     291.80 ± 16%  sched_debug.cfs_rq:/.runnable_avg.min
    517.96 ±  5%     -20.3%     412.57 ±  9%  sched_debug.cfs_rq:/.util_avg.avg
    352.69 ±  5%     -26.1%     260.66 ± 14%  sched_debug.cfs_rq:/.util_avg.min
    113.13 ±  9%     -26.8%      82.85 ± 15%  sched_debug.cfs_rq:/.util_est_enqueued.stddev
     18547 ±  4%      -9.5%      16791 ±  3%  sched_debug.cpu.curr->pid.max
      1549 ± 11%   +1106.2%      18692 ±123%  sched_debug.cpu.max_idle_balance_cost.stddev
      0.70 ± 16%     -25.1%       0.52 ± 18%  sched_debug.cpu.nr_running.avg
    862357 ±  4%     -16.3%     722142 ±  3%  sched_debug.cpu.nr_switches.avg
   1440368 ±  6%     -22.2%    1120203 ±  6%  sched_debug.cpu.nr_switches.max
    756963 ±  4%     -14.6%     646359 ±  5%  sched_debug.cpu.nr_switches.min
    150642 ± 10%     -33.8%      99651 ± 18%  sched_debug.cpu.nr_switches.stddev
  17687949           -23.3%   13563229 ±  2%  numa-vmstat.node0.nr_dirtied
    734675 ±  2%     -22.3%     570784 ±  2%  numa-vmstat.node0.nr_dirty
   1201580 ±  2%     -27.0%     877113 ±  3%  numa-vmstat.node0.nr_inactive_file
     15586 ±  4%     -12.4%      13655 ±  4%  numa-vmstat.node0.nr_kernel_stack
      3945 ±  5%     -12.5%       3453 ±  4%  numa-vmstat.node0.nr_shmem
    415866 ±  2%     -25.1%     311497 ±  3%  numa-vmstat.node0.nr_slab_reclaimable
    306030 ±  2%     -25.5%     228011 ±  4%  numa-vmstat.node0.nr_slab_unreclaimable
  17687949           -23.3%   13563229 ±  2%  numa-vmstat.node0.nr_written
   1201580 ±  2%     -27.0%     877113 ±  3%  numa-vmstat.node0.nr_zone_inactive_file
    734697 ±  2%     -22.3%     570821 ±  2%  numa-vmstat.node0.nr_zone_write_pending
  26548703           -20.8%   21023488 ±  2%  numa-vmstat.node0.numa_hit
  26496970           -20.9%   20948116 ±  2%  numa-vmstat.node0.numa_local
   2316618           -20.7%    1836559 ±  5%  numa-vmstat.node1.nr_dirtied
     89623 ±  3%     -14.3%      76800 ±  6%  numa-vmstat.node1.nr_dirty
    145701 ±  2%     -17.3%     120486 ±  9%  numa-vmstat.node1.nr_inactive_file
     62668 ± 10%     -18.9%      50828 ± 13%  numa-vmstat.node1.nr_slab_reclaimable
     50710 ± 17%     -26.2%      37434 ±  5%  numa-vmstat.node1.nr_slab_unreclaimable
   2316618           -20.7%    1836559 ±  5%  numa-vmstat.node1.nr_written
    145701 ±  2%     -17.3%     120486 ±  9%  numa-vmstat.node1.nr_zone_inactive_file
     89584 ±  3%     -14.3%      76792 ±  6%  numa-vmstat.node1.nr_zone_write_pending
   3400024 ±  5%     -22.4%    2639087 ±  5%  numa-vmstat.node1.numa_hit
   3332048 ±  6%     -22.1%    2596249 ±  4%  numa-vmstat.node1.numa_local
     77508            +1.2%      78432        proc-vmstat.nr_anon_pages
  20004568           -23.0%   15399788 ±  2%  proc-vmstat.nr_dirtied
    825597 ±  2%     -21.4%     648654 ±  2%  proc-vmstat.nr_dirty
   2311462           -15.1%    1961741        proc-vmstat.nr_file_pages
  29390035            +2.0%   29973527        proc-vmstat.nr_free_pages
   1346949 ±  2%     -25.9%     997847 ±  3%  proc-vmstat.nr_inactive_file
     31402 ± 13%     -21.9%      24514 ±  7%  proc-vmstat.nr_kernel_stack
      4599 ±  2%      -8.4%       4211        proc-vmstat.nr_shmem
    478540           -24.3%     362476 ±  3%  proc-vmstat.nr_slab_reclaimable
    356646           -25.6%     265413 ±  4%  proc-vmstat.nr_slab_unreclaimable
  20004568           -23.0%   15399788 ±  2%  proc-vmstat.nr_written
   1346949 ±  2%     -25.9%     997847 ±  3%  proc-vmstat.nr_zone_inactive_file
    825584 ±  2%     -21.4%     648681 ±  2%  proc-vmstat.nr_zone_write_pending
  29951284           -21.0%   23664558 ±  2%  proc-vmstat.numa_hit
  29831574           -21.1%   23546349 ±  2%  proc-vmstat.numa_local
  51777954           -21.0%   40906350 ±  2%  proc-vmstat.pgalloc_normal
      5920 ±  2%      -7.6%       5472 ±  2%  proc-vmstat.pgdeactivate
   2342027            -8.5%    2142047        proc-vmstat.pgfault
  51819442           -21.0%   40950599 ±  2%  proc-vmstat.pgfree
   5071045 ±  3%     -22.9%    3908046 ±  4%  proc-vmstat.pgpgin
 1.153e+08           -17.9%   94738236        proc-vmstat.pgpgout
    141611            -6.3%     132656        proc-vmstat.pgreuse
  10386182 ±  3%     -24.2%    7877205 ±  4%  proc-vmstat.pgrotated
  36803772           -24.1%   27916664 ±  2%  proc-vmstat.slabs_scanned




Disclaimer:
Results have been estimated based on internal Intel analysis and are provided
for informational purposes only. Any difference in system hardware or software
design or configuration may affect actual performance.
  

On Mon, Nov 21, 2022 at 06:32:48AM +0800, Gao Xiang wrote:
> On Wed, Nov 16, 2022 at 01:51:06PM +1100, Dave Chinner wrote:
> > On Tue, Nov 15, 2022 at 03:57:54PM +0800, Gao Xiang wrote:
> > > On Sun, Nov 13, 2022 at 08:45:45AM +1100, Dave Chinner wrote:
> > ..... because the assumption is that AGFL blocks come from free
> > space and so when we are at ENOSPC bno/cnt btrees *do no require
> > splits* so will not consume extra space. Hence allocation at ENOSPC
> > doesn't need to take into account AGFL block usage because the AGFL
> > will not be consumed.
> 
> I noticed another thing.  I think the reason why the first allocation
> in this case caused a cntbt split is that Zorro's workload set
> sunit/swidth.  Therefore, due to align requirement, I assume it
> called xfs_alloc_fix_len() to fix up agbno and len.
> 
> Actually I found our workload has the similar sunit/swidth setup and
> I am thinking about this these days.  One thing is that why we need
> freespace btree splits when consuming free blocks.

stripe alignment does not affect AGFL behaviour, not free space
btree allocation requirements. stripe alignment only affects the
initial user data allocations from xfs_bmap_btalloc() where the
stripe alignment variables (e.g. min align, align slop, etc). None
of these parameters are set for AGFL or btree block allocations, so
they ignore all alignment constraints.

> Another thing is that considering we're near ENOSPC, and bno/cnt
> btrees has only a few records.  If we allocates without alignment,
> I also think bno/cnt btrees do no require splits so it will not
> consume extra space since the overall extents only decrease.
> 
> Yet how about allocating with alignment? It seems that it can add
> another free extent in order to fulfill the alignment.  I'm not sure
> if it can cause some corner cases here.

Alignment never requires an extra allocation - it reserves extra
space to select a larger freespace that an aligned extent can be
carved out of. If an aligned extent cannot be found, we fall back to
unaligned allocation....

> > Similarly, if we have enough free space records to split a free
> > space btree block, we have enough free space to refill the AGFL
> > multiple times and we don't have to reserve space for them.
> > 
> > IOWs, the allocation code has, historically, never had to care about
> > AGFL refilling when the AG is near ENOSPC as nothing will consume
> > AGFL blocks when the AG is near empty.
> > 
> > This is the design assumption that AG reservations broke. This is
> > why I'm asking you to look into taking blocks that are supposedly
> > reserved for the AGFL, because as reserved space is used, the
> > bno/cnt btrees will shrink and return those blocks to free space and
> > hence they are still available for reserved allocations to use as
> > the real physical ENOSPC condition approaches.
> 
> Yeah, intuitively I also imagine like what you said.  However, does it
> have strictly monotonicity, especially with stripe alignment setup?
> 
> > 
> > The more I look at this, the more I think overall answer to this
> > problem is to allow AGFL refilling to ignore AG reserves rather than
> > causing ENOSPC....
> 
> Could you give more details how to fit this case?  Also we have a
> short talk last Wednesday (sorry that I had an urgent thing at that
> time).  You mentioned "the simple solution is something like
> min(ag reservation blocks, needed AGFL blocks) instead of accounting
> them separately", could you give an example for this case as well?

Go read the head comment in xfs_ag_resv.c. Specifically, this bit:

 * Reserved blocks can be managed by passing one of the enum xfs_ag_resv_type
 * values via struct xfs_alloc_arg or directly to the xfs_free_extent
 * function.  It might seem a little funny to maintain a reservoir of blocks
 * to feed another reservoir, but the AGFL only holds enough blocks to get
 * through the next transaction.  The per-AG reservation is to ensure (we
 * hope) that each AG never runs out of blocks.  Each data structure wanting
 * to use the reservation system should update ask/used in xfs_ag_resv_init.

This was originally written with RMAPBT updates in mind (rmap btree
blocks come from the AGFL, just like the bno/cnt btrees). SInce this
was written, AGFL blocks have been carved out of this reservation by
XFS_AG_RESV_AGFL, and so this reservation space no longer reserves
or accounts for refilling the AGFL for non-RMAPBT operations.

My point is, however, that the reservation space was intended for
ensuring the AGFL could be refilled without triggering ENOSPC in
certain circumstances. And here we are with a situation where
refilling the AGFL triggers ENOSPC because of the reservation
space.

The "available" calculation in xfs_alloc_space_available() does:

	available = (int)(pag->pagf_freeblks + agflcount -
                          reservation - min_free - args->minleft);


Which is effectively:

	available =	(free space) -
			(reserved space) -
			(minimum AG requires to be left free) -
			(minimum allocation requires to left free)

But what we have to consider is that three of these parameters have
a component of "AGFL blocks" in them:

free space	= indexed free space + current AGFL blocks
reserved space	= space reserved for future AGFL block allocation
minimum AG free = AGFL blocks needed for this allocation

Looked at a different way (as a timeline):

free space	= Previously allocated AGFL blocks
reserved space  = future allocation AGFL block pool
minimum free	= present allocation AGFL needs

So the problem you are seeing is that on the second allocation of a
chain, the AGFL blocks previously allocated by the initial
allocation in the chain are not sufficient for present AGFL needs
and we do not allow the present allocation to use space from the
future AGFL block pool to fill the AGFL....

Also, we need to keep in mind that the initial allocation uses
args->resv = XFS_AG_RESV_NONE, so the reservation space returned for
the initial allocation is the full metadata (finobt) + reserved
(RMAPBT) reservation that is being made.

The second allocation in the chain (where minleft is zero) really
needs to have a reserve pool for AGFL filling. But we don't have a
reserve pool for general AGFL allocations anymore, and this looks
like we need it. i.e. instead of XFS_AG_RESV_AGFL just being used to
avoid accounting AGFL block usage, perhaps it should actually manage
a reserve pool for ensuring the AGFL can be refilled near ENOSPC
(due to outstanding RMAP/FINOBT reservations) in a single
transaction allocation chain....

i.e. so long as the pool has more blocks in it than the current
allocation requires to refill the AGFL, the allocation can
proceed...

> > > I have strong feeling that the current per-AG reservation code (or
> > > AGFL reservation as in xfs_alloc_min_freelist() ) doesn't work
> > > properly for multiple allocations in the same AG in order to make
> > > sure such multiple allocations all succeed.
> > > 
> > > Also, a wilder question is that I'm not sure why such multiple
> > > allocations in oneshot _cannot_ be handled with a defer ops as
> > > some new log intent, so that we don't need to care about minleft
> > > messy anymore.
> > 
> > We do use intents and deferred ops for BMBT freeing and reflink
> > based insertion, but those only log changes to individual records in
> > the btree. They do not record internal btree shape changes at all.
> > Yes, we could convert normal extent allocation to use these intents
> > as well, but that doesn't solve the problem of chained allocations
> > within a single AG.
> > 
> > IOWs, the chain of allocations for a BMBT split I mention above
> > still exists for record level intents. To handle the btree split
> > case as a chain of intents involves a whole new level of complexity
> > and overhead in the btree code, and likely introduces more problems
> > at ENOSPC than it solves...
> 
> My question was that if we convert some allocations into dfops, does
> inode extents-to-btree needs to be strictly allocated in this AG
> anymore? ... Does that tend to be a long-term plan?

It's not in any of my plans.

The problem with moving to "any AG" allocation is that BMBT block
allocation is now subject to AGF locking rules and availability.
Say, for example, we have 4 AGs and we just allocated the initial
extent in AG 3 (the last AG) - we only have one safe choice of AG we
can allocate from due to AGF lock ordering.  If we don't ensure that
the BMBT blocks can be allocated from the same AG as the initial
allocation, we lose the ability to guarantee that the BMBT blocks
(and INOBT blocks) will be allocated without an ENOSPC condition
occurring.

If we get ENOSPC part way through a BMBT or INOBT update regardless
of whether we are rolling the transaction via deferops or just a
single transaction allocation change, we have to cancel the
currently running transaction. The transaction will be dirty at this
point, and cancelling a dirty transaciton shuts down the filesystem.
IOWs, failing to guarantee that the entire allocation chain will
succeed results in turning a simple ENOSPC error being reported to
userspace into a full filesystem shutdown....

Cheers,

Dave.
  

On Tue, Nov 22, 2022 at 09:09:34AM +0800, kernel test robot wrote:
> 
> please be noted we noticed Gao Xiang and Dave Chinner have already had lots of
> discussion around this patch, which seems there is maybe new version later.
> we just sent out this report FYI the possible performance impact of this patch.
> 
> 
> Greeting,
> 
> FYI, we noticed a -15.1% regression of fxmark.ssd_xfs_MWCM_72_directio.works/sec due to commit:

Thanks for your report!

At a glance, I have no idea why this commit can have performance
impacts.  Is the result stable?

Thanks,
Gao Xiang

> 
> 
> commit: ada76f94c5b32c1828955d70f692b111a9ec2d33 ("[PATCH] xfs: account extra freespace btree splits for multiple allocations")
> url: https://github.com/intel-lab-lkp/linux/commits/Gao-Xiang/xfs-account-extra-freespace-btree-splits-for-multiple-allocations/20221109-114953
> base: https://git.kernel.org/cgit/fs/xfs/xfs-linux.git for-next
> patch link: https://lore.kernel.org/all/20221109034802.40322-1-hsiangkao@linux.alibaba.com/
> patch subject: [PATCH] xfs: account extra freespace btree splits for multiple allocations
> 
> in testcase: fxmark
> on test machine: 128 threads 2 sockets Intel(R) Xeon(R) Platinum 8358 CPU @ 2.60GHz (Ice Lake) with 128G memory
> with following parameters:
> 
> 	disk: 1SSD
> 	media: ssd
> 	test: MWCM
> 	fstype: xfs
> 	directio: directio
> 	cpufreq_governor: performance
> 
> test-description: FxMark is a filesystem benchmark that test multicore scalability.
> test-url: https://github.com/sslab-gatech/fxmark
> 
> 
> 
> If you fix the issue, kindly add following tag
> | Reported-by: kernel test robot <oliver.sang@intel.com>
> | Link: https://lore.kernel.org/oe-lkp/202211220854.48dad6fd-oliver.sang@intel.com
> 
> 
> Details are as below:
> -------------------------------------------------------------------------------------------------->
> 
> 
> To reproduce:
> 
>         git clone https://github.com/intel/lkp-tests.git
>         cd lkp-tests
>         sudo bin/lkp install job.yaml           # job file is attached in this email
>         bin/lkp split-job --compatible job.yaml # generate the yaml file for lkp run
>         sudo bin/lkp run generated-yaml-file
> 
>         # if come across any failure that blocks the test,
>         # please remove ~/.lkp and /lkp dir to run from a clean state.
> 
> =========================================================================================
> compiler/cpufreq_governor/directio/disk/fstype/kconfig/media/rootfs/tbox_group/test/testcase:
>   gcc-11/performance/directio/1SSD/xfs/x86_64-rhel-8.3/ssd/debian-11.1-x86_64-20220510.cgz/lkp-icl-2sp5/MWCM/fxmark
> 
> commit: 
>   4eb559dd15 ("Merge tag 'refcount-cow-domain-6.1_2022-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.1-fixesA")
>   ada76f94c5 ("xfs: account extra freespace btree splits for multiple allocations")
> 
> 4eb559dd15671cca ada76f94c5b32c1828955d70f69 
> ---------------- --------------------------- 
>          %stddev     %change         %stddev
>              \          |                \  
>     260.92           +90.8%     497.93 ± 13%  fxmark.ssd_xfs_MWCM_18_directio.idle_sec
>      29.10           +91.5%      55.74 ± 14%  fxmark.ssd_xfs_MWCM_18_directio.idle_util
>       9.11 ±  2%     -17.6%       7.51 ±  8%  fxmark.ssd_xfs_MWCM_18_directio.iowait_sec
>       1.02 ±  2%     -17.3%       0.84 ±  8%  fxmark.ssd_xfs_MWCM_18_directio.iowait_util
>     617.96           -38.8%     378.15 ± 19%  fxmark.ssd_xfs_MWCM_18_directio.sys_sec
>      68.93           -38.6%      42.31 ± 18%  fxmark.ssd_xfs_MWCM_18_directio.sys_util
>       1.80 ±  4%     -18.5%       1.47 ±  5%  fxmark.ssd_xfs_MWCM_18_directio.user_sec
>       0.20 ±  4%     -18.2%       0.16 ±  4%  fxmark.ssd_xfs_MWCM_18_directio.user_util
>    3363535           -29.6%    2369575 ±  7%  fxmark.ssd_xfs_MWCM_18_directio.works
>      67262           -29.6%      47384 ±  7%  fxmark.ssd_xfs_MWCM_18_directio.works/sec
>       0.01 ±111%  +51925.0%       3.47 ±  9%  fxmark.ssd_xfs_MWCM_1_directio.idle_sec
>       0.01 ±111%  +52382.0%       6.99 ±  9%  fxmark.ssd_xfs_MWCM_1_directio.idle_util
>       0.23 ± 14%   +1481.9%       3.64 ± 14%  fxmark.ssd_xfs_MWCM_1_directio.iowait_sec
>       0.46 ± 14%   +1496.0%       7.33 ± 14%  fxmark.ssd_xfs_MWCM_1_directio.iowait_util
>       0.58           +20.9%       0.70 ±  2%  fxmark.ssd_xfs_MWCM_1_directio.irq_sec
>       1.15           +21.9%       1.40 ±  2%  fxmark.ssd_xfs_MWCM_1_directio.irq_util
>       0.37 ±  2%     +18.9%       0.44 ±  5%  fxmark.ssd_xfs_MWCM_1_directio.softirq_sec
>       0.74 ±  2%     +20.0%       0.89 ±  5%  fxmark.ssd_xfs_MWCM_1_directio.softirq_util
>      47.70           -15.4%      40.33 ±  2%  fxmark.ssd_xfs_MWCM_1_directio.sys_sec
>      95.24           -14.7%      81.24 ±  2%  fxmark.ssd_xfs_MWCM_1_directio.sys_util
>       1.20 ±  5%     -11.0%       1.07 ±  4%  fxmark.ssd_xfs_MWCM_1_directio.user_sec
>       2.40 ±  6%     -10.2%       2.15 ±  4%  fxmark.ssd_xfs_MWCM_1_directio.user_util
>    2639345           -15.6%    2228369 ±  4%  fxmark.ssd_xfs_MWCM_1_directio.works
>      52786           -15.6%      44567 ±  4%  fxmark.ssd_xfs_MWCM_1_directio.works/sec
>       4.11 ±  3%    +254.5%      14.56 ± 18%  fxmark.ssd_xfs_MWCM_2_directio.idle_sec
>       4.10 ±  3%    +255.9%      14.60 ± 18%  fxmark.ssd_xfs_MWCM_2_directio.idle_util
>       1.42 ±  6%    +435.2%       7.57 ±  6%  fxmark.ssd_xfs_MWCM_2_directio.iowait_sec
>       1.41 ±  6%    +437.2%       7.59 ±  6%  fxmark.ssd_xfs_MWCM_2_directio.iowait_util
>       0.82           +20.2%       0.99 ±  4%  fxmark.ssd_xfs_MWCM_2_directio.irq_sec
>       0.82           +20.7%       0.99 ±  4%  fxmark.ssd_xfs_MWCM_2_directio.irq_util
>       0.52 ±  4%     +30.0%       0.67 ±  4%  fxmark.ssd_xfs_MWCM_2_directio.softirq_sec
>       0.52 ±  4%     +30.5%       0.67 ±  4%  fxmark.ssd_xfs_MWCM_2_directio.softirq_util
>      91.86           -18.6%      74.82 ±  4%  fxmark.ssd_xfs_MWCM_2_directio.sys_sec
>      91.73           -18.3%      74.99 ±  4%  fxmark.ssd_xfs_MWCM_2_directio.sys_util
>       1.42 ±  4%     -18.7%       1.15 ±  4%  fxmark.ssd_xfs_MWCM_2_directio.user_sec
>       1.42 ±  4%     -18.4%       1.16 ±  4%  fxmark.ssd_xfs_MWCM_2_directio.user_util
>    3159498           -23.2%    2425056 ±  5%  fxmark.ssd_xfs_MWCM_2_directio.works
>      63189           -23.3%      48486 ±  5%  fxmark.ssd_xfs_MWCM_2_directio.works/sec
>     413.60 ±  4%    +103.5%     841.63 ± 20%  fxmark.ssd_xfs_MWCM_36_directio.idle_sec
>      22.94 ±  4%    +103.9%      46.78 ± 20%  fxmark.ssd_xfs_MWCM_36_directio.idle_util
>       1364           -31.6%     933.33 ± 19%  fxmark.ssd_xfs_MWCM_36_directio.sys_sec
>      75.70           -31.5%      51.85 ± 18%  fxmark.ssd_xfs_MWCM_36_directio.sys_util
>       1.82 ±  4%     -11.7%       1.60 ±  5%  fxmark.ssd_xfs_MWCM_36_directio.user_sec
>       0.10 ±  4%     -11.5%       0.09 ±  5%  fxmark.ssd_xfs_MWCM_36_directio.user_util
>    2850816           -22.9%    2197955 ±  7%  fxmark.ssd_xfs_MWCM_36_directio.works
>      57006           -22.9%      43943 ±  7%  fxmark.ssd_xfs_MWCM_36_directio.works/sec
>      54.22           +63.5%      88.65 ±  2%  fxmark.ssd_xfs_MWCM_4_directio.idle_sec
>      27.33           +64.7%      45.02 ±  2%  fxmark.ssd_xfs_MWCM_4_directio.idle_util
>       6.53           +36.1%       8.89 ±  8%  fxmark.ssd_xfs_MWCM_4_directio.iowait_sec
>       3.29           +37.1%       4.51 ±  8%  fxmark.ssd_xfs_MWCM_4_directio.iowait_util
>       1.37           +21.7%       1.67 ±  3%  fxmark.ssd_xfs_MWCM_4_directio.irq_sec
>       0.69           +22.6%       0.85 ±  3%  fxmark.ssd_xfs_MWCM_4_directio.irq_util
>       0.64           +20.3%       0.77 ±  3%  fxmark.ssd_xfs_MWCM_4_directio.softirq_sec
>       0.32           +21.2%       0.39 ±  3%  fxmark.ssd_xfs_MWCM_4_directio.softirq_util
>     134.06           -28.6%      95.67 ±  2%  fxmark.ssd_xfs_MWCM_4_directio.sys_sec
>      67.58           -28.1%      48.59 ±  2%  fxmark.ssd_xfs_MWCM_4_directio.sys_util
>       1.55 ±  2%     -18.4%       1.26 ±  5%  fxmark.ssd_xfs_MWCM_4_directio.user_sec
>       0.78 ±  2%     -17.8%       0.64 ±  5%  fxmark.ssd_xfs_MWCM_4_directio.user_util
>    3262962           -26.9%    2383952        fxmark.ssd_xfs_MWCM_4_directio.works
>      65256           -26.9%      47670        fxmark.ssd_xfs_MWCM_4_directio.works/sec
>     489.98 ±  3%    +160.6%       1277 ± 24%  fxmark.ssd_xfs_MWCM_54_directio.idle_sec
>      18.11 ±  3%    +161.0%      47.27 ± 24%  fxmark.ssd_xfs_MWCM_54_directio.idle_util
>       2185           -36.3%       1391 ± 22%  fxmark.ssd_xfs_MWCM_54_directio.sys_sec
>      80.77           -36.2%      51.49 ± 22%  fxmark.ssd_xfs_MWCM_54_directio.sys_util
>    2448443           -24.0%    1859708 ±  9%  fxmark.ssd_xfs_MWCM_54_directio.works
>      48963           -24.1%      37175 ±  9%  fxmark.ssd_xfs_MWCM_54_directio.works/sec
>     614.60 ±  2%     +88.5%       1158 ±  9%  fxmark.ssd_xfs_MWCM_72_directio.idle_sec
>      17.04 ±  2%     +88.6%      32.13 ±  9%  fxmark.ssd_xfs_MWCM_72_directio.idle_util
>       6.44 ±  4%     -14.8%       5.48 ±  9%  fxmark.ssd_xfs_MWCM_72_directio.iowait_sec
>       0.18 ±  4%     -14.8%       0.15 ± 10%  fxmark.ssd_xfs_MWCM_72_directio.iowait_util
>       2953           -18.5%       2407 ±  4%  fxmark.ssd_xfs_MWCM_72_directio.sys_sec
>      81.89           -18.5%      66.77 ±  4%  fxmark.ssd_xfs_MWCM_72_directio.sys_util
>    2279692           -15.1%    1935171 ±  2%  fxmark.ssd_xfs_MWCM_72_directio.works
>      45589           -15.1%      38687 ±  2%  fxmark.ssd_xfs_MWCM_72_directio.works/sec
>     934.32           -10.3%     838.20        fxmark.time.elapsed_time
>     934.32           -10.3%     838.20        fxmark.time.elapsed_time.max
>   43490089           -20.8%   34446960 ±  3%  fxmark.time.file_system_outputs
>     128601 ±  3%     -31.6%      87922 ±  4%  fxmark.time.involuntary_context_switches
>      31.83           -17.8%      26.17 ±  5%  fxmark.time.percent_of_cpu_this_job_got
>     301.24           -26.5%     221.43 ±  5%  fxmark.time.system_time
>     841264 ±  3%     -11.2%     747133 ±  5%  fxmark.time.voluntary_context_switches
>     989.01            -9.6%     893.57        uptime.boot
>      54.77           +10.7%      60.61        iostat.cpu.idle
>       5.31 ±  4%     +21.4%       6.45 ±  4%  iostat.cpu.iowait
>      38.42           -18.0%      31.51 ±  2%  iostat.cpu.system
>      55.66            +5.8       61.45        mpstat.cpu.all.idle%
>       5.31 ±  5%      +1.2        6.46 ±  4%  mpstat.cpu.all.iowait%
>       0.60 ±  2%      -0.1        0.53        mpstat.cpu.all.soft%
>      36.50            -6.6       29.87 ±  3%  mpstat.cpu.all.sys%
>   26496967           -20.9%   20947493 ±  2%  numa-numastat.node0.local_node
>   26548700           -20.8%   21022864 ±  2%  numa-numastat.node0.numa_hit
>    3332141 ±  6%     -22.1%    2595871 ±  4%  numa-numastat.node1.local_node
>    3400117 ±  5%     -22.4%    2638708 ±  5%  numa-numastat.node1.numa_hit
>       2211            +1.0%       2233        perf-stat.i.minor-faults
>       0.39 ±  9%      +0.1        0.44 ±  3%  perf-stat.i.node-load-miss-rate%
>       2211            +1.0%       2233        perf-stat.i.page-faults
>       2209            +1.0%       2230        perf-stat.ps.minor-faults
>       2209            +1.0%       2230        perf-stat.ps.page-faults
>      53.83           +11.5%      60.00        vmstat.cpu.id
>       5430 ±  2%     -14.0%       4668 ±  3%  vmstat.io.bi
>     123556            -8.3%     113294 ±  2%  vmstat.io.bo
>   11181852           -16.7%    9318758 ±  2%  vmstat.memory.cache
>       7.67 ±  6%     -19.6%       6.17 ± 11%  vmstat.procs.r
>    9247281           -15.1%    7847381        meminfo.Cached
>    3299044 ±  2%     -21.5%    2591082 ±  2%  meminfo.Dirty
>    5715841 ±  2%     -24.4%    4320653 ±  3%  meminfo.Inactive
>    5389224 ±  2%     -25.9%    3991807 ±  3%  meminfo.Inactive(file)
>    1914390           -24.3%    1449759 ±  3%  meminfo.KReclaimable
>      31406 ± 13%     -22.0%      24510 ±  7%  meminfo.KernelStack
>   14111361           -16.6%   11775228 ±  2%  meminfo.Memused
>    1914390           -24.3%    1449759 ±  3%  meminfo.SReclaimable
>    1427015           -25.6%    1061962 ±  4%  meminfo.SUnreclaim
>      18397 ±  2%      -8.4%      16846        meminfo.Shmem
>    3341406           -24.8%    2511722 ±  3%  meminfo.Slab
>   24035030           -18.6%   19557858 ±  2%  meminfo.max_used_kB
>       1.23 ± 22%      +0.4        1.58 ± 18%  perf-profile.calltrace.cycles-pp.xlog_cil_push_work.process_one_work.worker_thread.kthread.ret_from_fork
>       0.76 ± 44%      -0.4        0.38 ± 74%  perf-profile.children.cycles-pp.rcu_sched_clock_irq
>       0.09 ± 10%      -0.0        0.05 ± 47%  perf-profile.children.cycles-pp.mod_find
>       0.10 ± 47%      +0.1        0.18 ± 26%  perf-profile.children.cycles-pp.xfs_iext_lookup_extent
>       0.17 ± 26%      +0.1        0.25 ± 16%  perf-profile.children.cycles-pp.s_show
>       0.05 ± 82%      +0.1        0.13 ± 46%  perf-profile.children.cycles-pp.timekeeping_advance
>       0.05 ± 82%      +0.1        0.13 ± 46%  perf-profile.children.cycles-pp.update_wall_time
>       0.21 ± 21%      +0.1        0.31 ± 20%  perf-profile.children.cycles-pp.vsnprintf
>       0.20 ± 26%      +0.1        0.30 ± 17%  perf-profile.children.cycles-pp.seq_printf
>       1.23 ± 22%      +0.4        1.58 ± 18%  perf-profile.children.cycles-pp.xlog_cil_push_work
>       0.08 ± 14%      -0.0        0.04 ± 72%  perf-profile.self.cycles-pp.mod_find
>       0.14 ± 26%      +0.1        0.22 ± 16%  perf-profile.self.cycles-pp.xlog_cil_push_work
>       0.13 ± 37%      +0.1        0.21 ± 22%  perf-profile.self.cycles-pp.__folio_end_writeback
>       1339 ±  6%     -12.1%       1177 ±  6%  numa-meminfo.node0.Active
>       1317 ±  4%     -10.6%       1177 ±  6%  numa-meminfo.node0.Active(anon)
>    2938921 ±  2%     -22.3%    2284083 ±  2%  numa-meminfo.node0.Dirty
>    4950896 ±  2%     -25.3%    3699254 ±  2%  numa-meminfo.node0.Inactive
>    4806022 ±  2%     -27.0%    3510366 ±  3%  numa-meminfo.node0.Inactive(file)
>    1663428 ±  2%     -25.0%    1246833 ±  3%  numa-meminfo.node0.KReclaimable
>      15585 ±  4%     -12.4%      13655 ±  4%  numa-meminfo.node0.KernelStack
>    1663428 ±  2%     -25.0%    1246833 ±  3%  numa-meminfo.node0.SReclaimable
>    1224137 ±  2%     -25.5%     912586 ±  4%  numa-meminfo.node0.SUnreclaim
>      15785 ±  5%     -12.5%      13811 ±  4%  numa-meminfo.node0.Shmem
>    2887566           -25.2%    2159421 ±  3%  numa-meminfo.node0.Slab
>     358435 ±  3%     -14.3%     307335 ±  6%  numa-meminfo.node1.Dirty
>     764404 ±  6%     -18.6%     622071 ± 10%  numa-meminfo.node1.Inactive
>     582651 ±  2%     -17.3%     482089 ±  9%  numa-meminfo.node1.Inactive(file)
>     250653 ± 10%     -18.9%     203397 ± 13%  numa-meminfo.node1.KReclaimable
>    3410163 ± 54%     -26.4%    2508459 ± 68%  numa-meminfo.node1.MemUsed
>     250653 ± 10%     -18.9%     203397 ± 13%  numa-meminfo.node1.SReclaimable
>     202812 ± 17%     -26.2%     149763 ±  5%  numa-meminfo.node1.SUnreclaim
>     453467 ±  9%     -22.1%     353161 ±  8%  numa-meminfo.node1.Slab
>       0.71 ± 14%     -21.5%       0.56 ± 14%  sched_debug.cfs_rq:/.h_nr_running.avg
>       1405 ± 55%     -68.3%     445.08 ± 27%  sched_debug.cfs_rq:/.load_avg.avg
>    5023746           -33.8%    3324248 ± 13%  sched_debug.cfs_rq:/.min_vruntime.avg
>    5080937           -33.2%    3395209 ± 12%  sched_debug.cfs_rq:/.min_vruntime.max
>    4683128           -31.3%    3217873 ± 13%  sched_debug.cfs_rq:/.min_vruntime.min
>       0.59 ±  9%     -17.4%       0.49 ± 18%  sched_debug.cfs_rq:/.nr_running.avg
>     650.51 ± 13%     -32.3%     440.38 ±  9%  sched_debug.cfs_rq:/.runnable_avg.avg
>       1007 ±  8%     -18.5%     821.27 ±  6%  sched_debug.cfs_rq:/.runnable_avg.max
>     476.07 ± 17%     -38.7%     291.80 ± 16%  sched_debug.cfs_rq:/.runnable_avg.min
>     517.96 ±  5%     -20.3%     412.57 ±  9%  sched_debug.cfs_rq:/.util_avg.avg
>     352.69 ±  5%     -26.1%     260.66 ± 14%  sched_debug.cfs_rq:/.util_avg.min
>     113.13 ±  9%     -26.8%      82.85 ± 15%  sched_debug.cfs_rq:/.util_est_enqueued.stddev
>      18547 ±  4%      -9.5%      16791 ±  3%  sched_debug.cpu.curr->pid.max
>       1549 ± 11%   +1106.2%      18692 ±123%  sched_debug.cpu.max_idle_balance_cost.stddev
>       0.70 ± 16%     -25.1%       0.52 ± 18%  sched_debug.cpu.nr_running.avg
>     862357 ±  4%     -16.3%     722142 ±  3%  sched_debug.cpu.nr_switches.avg
>    1440368 ±  6%     -22.2%    1120203 ±  6%  sched_debug.cpu.nr_switches.max
>     756963 ±  4%     -14.6%     646359 ±  5%  sched_debug.cpu.nr_switches.min
>     150642 ± 10%     -33.8%      99651 ± 18%  sched_debug.cpu.nr_switches.stddev
>   17687949           -23.3%   13563229 ±  2%  numa-vmstat.node0.nr_dirtied
>     734675 ±  2%     -22.3%     570784 ±  2%  numa-vmstat.node0.nr_dirty
>    1201580 ±  2%     -27.0%     877113 ±  3%  numa-vmstat.node0.nr_inactive_file
>      15586 ±  4%     -12.4%      13655 ±  4%  numa-vmstat.node0.nr_kernel_stack
>       3945 ±  5%     -12.5%       3453 ±  4%  numa-vmstat.node0.nr_shmem
>     415866 ±  2%     -25.1%     311497 ±  3%  numa-vmstat.node0.nr_slab_reclaimable
>     306030 ±  2%     -25.5%     228011 ±  4%  numa-vmstat.node0.nr_slab_unreclaimable
>   17687949           -23.3%   13563229 ±  2%  numa-vmstat.node0.nr_written
>    1201580 ±  2%     -27.0%     877113 ±  3%  numa-vmstat.node0.nr_zone_inactive_file
>     734697 ±  2%     -22.3%     570821 ±  2%  numa-vmstat.node0.nr_zone_write_pending
>   26548703           -20.8%   21023488 ±  2%  numa-vmstat.node0.numa_hit
>   26496970           -20.9%   20948116 ±  2%  numa-vmstat.node0.numa_local
>    2316618           -20.7%    1836559 ±  5%  numa-vmstat.node1.nr_dirtied
>      89623 ±  3%     -14.3%      76800 ±  6%  numa-vmstat.node1.nr_dirty
>     145701 ±  2%     -17.3%     120486 ±  9%  numa-vmstat.node1.nr_inactive_file
>      62668 ± 10%     -18.9%      50828 ± 13%  numa-vmstat.node1.nr_slab_reclaimable
>      50710 ± 17%     -26.2%      37434 ±  5%  numa-vmstat.node1.nr_slab_unreclaimable
>    2316618           -20.7%    1836559 ±  5%  numa-vmstat.node1.nr_written
>     145701 ±  2%     -17.3%     120486 ±  9%  numa-vmstat.node1.nr_zone_inactive_file
>      89584 ±  3%     -14.3%      76792 ±  6%  numa-vmstat.node1.nr_zone_write_pending
>    3400024 ±  5%     -22.4%    2639087 ±  5%  numa-vmstat.node1.numa_hit
>    3332048 ±  6%     -22.1%    2596249 ±  4%  numa-vmstat.node1.numa_local
>      77508            +1.2%      78432        proc-vmstat.nr_anon_pages
>   20004568           -23.0%   15399788 ±  2%  proc-vmstat.nr_dirtied
>     825597 ±  2%     -21.4%     648654 ±  2%  proc-vmstat.nr_dirty
>    2311462           -15.1%    1961741        proc-vmstat.nr_file_pages
>   29390035            +2.0%   29973527        proc-vmstat.nr_free_pages
>    1346949 ±  2%     -25.9%     997847 ±  3%  proc-vmstat.nr_inactive_file
>      31402 ± 13%     -21.9%      24514 ±  7%  proc-vmstat.nr_kernel_stack
>       4599 ±  2%      -8.4%       4211        proc-vmstat.nr_shmem
>     478540           -24.3%     362476 ±  3%  proc-vmstat.nr_slab_reclaimable
>     356646           -25.6%     265413 ±  4%  proc-vmstat.nr_slab_unreclaimable
>   20004568           -23.0%   15399788 ±  2%  proc-vmstat.nr_written
>    1346949 ±  2%     -25.9%     997847 ±  3%  proc-vmstat.nr_zone_inactive_file
>     825584 ±  2%     -21.4%     648681 ±  2%  proc-vmstat.nr_zone_write_pending
>   29951284           -21.0%   23664558 ±  2%  proc-vmstat.numa_hit
>   29831574           -21.1%   23546349 ±  2%  proc-vmstat.numa_local
>   51777954           -21.0%   40906350 ±  2%  proc-vmstat.pgalloc_normal
>       5920 ±  2%      -7.6%       5472 ±  2%  proc-vmstat.pgdeactivate
>    2342027            -8.5%    2142047        proc-vmstat.pgfault
>   51819442           -21.0%   40950599 ±  2%  proc-vmstat.pgfree
>    5071045 ±  3%     -22.9%    3908046 ±  4%  proc-vmstat.pgpgin
>  1.153e+08           -17.9%   94738236        proc-vmstat.pgpgout
>     141611            -6.3%     132656        proc-vmstat.pgreuse
>   10386182 ±  3%     -24.2%    7877205 ±  4%  proc-vmstat.pgrotated
>   36803772           -24.1%   27916664 ±  2%  proc-vmstat.slabs_scanned
> 
> 
> 
> 
> Disclaimer:
> Results have been estimated based on internal Intel analysis and are provided
> for informational purposes only. Any difference in system hardware or software
> design or configuration may affect actual performance.
> 
> 
> -- 
> 0-DAY CI Kernel Test Service
> https://01.org/lkp
> 
> 

> #
> # Automatically generated file; DO NOT EDIT.
> # Linux/x86_64 6.1.0-rc1 Kernel Configuration
> #
> CONFIG_CC_VERSION_TEXT="gcc-11 (Debian 11.3.0-8) 11.3.0"
> CONFIG_CC_IS_GCC=y
> CONFIG_GCC_VERSION=110300
> CONFIG_CLANG_VERSION=0
> CONFIG_AS_IS_GNU=y
> CONFIG_AS_VERSION=23900
> CONFIG_LD_IS_BFD=y
> CONFIG_LD_VERSION=23900
> CONFIG_LLD_VERSION=0
> CONFIG_CC_CAN_LINK=y
> CONFIG_CC_CAN_LINK_STATIC=y
> CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
> CONFIG_CC_HAS_ASM_INLINE=y
> CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
> CONFIG_PAHOLE_VERSION=123
> CONFIG_IRQ_WORK=y
> CONFIG_BUILDTIME_TABLE_SORT=y
> CONFIG_THREAD_INFO_IN_TASK=y
> 
> #
> # General setup
> #
> CONFIG_INIT_ENV_ARG_LIMIT=32
> # CONFIG_COMPILE_TEST is not set
> # CONFIG_WERROR is not set
> CONFIG_LOCALVERSION=""
> CONFIG_LOCALVERSION_AUTO=y
> CONFIG_BUILD_SALT=""
> CONFIG_HAVE_KERNEL_GZIP=y
> CONFIG_HAVE_KERNEL_BZIP2=y
> CONFIG_HAVE_KERNEL_LZMA=y
> CONFIG_HAVE_KERNEL_XZ=y
> CONFIG_HAVE_KERNEL_LZO=y
> CONFIG_HAVE_KERNEL_LZ4=y
> CONFIG_HAVE_KERNEL_ZSTD=y
> CONFIG_KERNEL_GZIP=y
> # CONFIG_KERNEL_BZIP2 is not set
> # CONFIG_KERNEL_LZMA is not set
> # CONFIG_KERNEL_XZ is not set
> # CONFIG_KERNEL_LZO is not set
> # CONFIG_KERNEL_LZ4 is not set
> # CONFIG_KERNEL_ZSTD is not set
> CONFIG_DEFAULT_INIT=""
> CONFIG_DEFAULT_HOSTNAME="(none)"
> CONFIG_SYSVIPC=y
> CONFIG_SYSVIPC_SYSCTL=y
> CONFIG_SYSVIPC_COMPAT=y
> CONFIG_POSIX_MQUEUE=y
> CONFIG_POSIX_MQUEUE_SYSCTL=y
> # CONFIG_WATCH_QUEUE is not set
> CONFIG_CROSS_MEMORY_ATTACH=y
> # CONFIG_USELIB is not set
> CONFIG_AUDIT=y
> CONFIG_HAVE_ARCH_AUDITSYSCALL=y
> CONFIG_AUDITSYSCALL=y
> 
> #
> # IRQ subsystem
> #
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_GENERIC_IRQ_SHOW=y
> CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
> CONFIG_GENERIC_PENDING_IRQ=y
> CONFIG_GENERIC_IRQ_MIGRATION=y
> CONFIG_GENERIC_IRQ_INJECTION=y
> CONFIG_HARDIRQS_SW_RESEND=y
> CONFIG_IRQ_DOMAIN=y
> CONFIG_IRQ_DOMAIN_HIERARCHY=y
> CONFIG_GENERIC_MSI_IRQ=y
> CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
> CONFIG_IRQ_MSI_IOMMU=y
> CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
> CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
> CONFIG_IRQ_FORCED_THREADING=y
> CONFIG_SPARSE_IRQ=y
> # CONFIG_GENERIC_IRQ_DEBUGFS is not set
> # end of IRQ subsystem
> 
> CONFIG_CLOCKSOURCE_WATCHDOG=y
> CONFIG_ARCH_CLOCKSOURCE_INIT=y
> CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
> CONFIG_GENERIC_TIME_VSYSCALL=y
> CONFIG_GENERIC_CLOCKEVENTS=y
> CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
> CONFIG_GENERIC_CMOS_UPDATE=y
> CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
> CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
> CONFIG_CONTEXT_TRACKING=y
> CONFIG_CONTEXT_TRACKING_IDLE=y
> 
> #
> # Timers subsystem
> #
> CONFIG_TICK_ONESHOT=y
> CONFIG_NO_HZ_COMMON=y
> # CONFIG_HZ_PERIODIC is not set
> # CONFIG_NO_HZ_IDLE is not set
> CONFIG_NO_HZ_FULL=y
> CONFIG_CONTEXT_TRACKING_USER=y
> # CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
> CONFIG_NO_HZ=y
> CONFIG_HIGH_RES_TIMERS=y
> CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=100
> # end of Timers subsystem
> 
> CONFIG_BPF=y
> CONFIG_HAVE_EBPF_JIT=y
> CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
> 
> #
> # BPF subsystem
> #
> CONFIG_BPF_SYSCALL=y
> CONFIG_BPF_JIT=y
> CONFIG_BPF_JIT_ALWAYS_ON=y
> CONFIG_BPF_JIT_DEFAULT_ON=y
> CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
> # CONFIG_BPF_PRELOAD is not set
> # CONFIG_BPF_LSM is not set
> # end of BPF subsystem
> 
> CONFIG_PREEMPT_VOLUNTARY_BUILD=y
> # CONFIG_PREEMPT_NONE is not set
> CONFIG_PREEMPT_VOLUNTARY=y
> # CONFIG_PREEMPT is not set
> CONFIG_PREEMPT_COUNT=y
> # CONFIG_PREEMPT_DYNAMIC is not set
> # CONFIG_SCHED_CORE is not set
> 
> #
> # CPU/Task time and stats accounting
> #
> CONFIG_VIRT_CPU_ACCOUNTING=y
> CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
> CONFIG_IRQ_TIME_ACCOUNTING=y
> CONFIG_HAVE_SCHED_AVG_IRQ=y
> CONFIG_BSD_PROCESS_ACCT=y
> CONFIG_BSD_PROCESS_ACCT_V3=y
> CONFIG_TASKSTATS=y
> CONFIG_TASK_DELAY_ACCT=y
> CONFIG_TASK_XACCT=y
> CONFIG_TASK_IO_ACCOUNTING=y
> # CONFIG_PSI is not set
> # end of CPU/Task time and stats accounting
> 
> CONFIG_CPU_ISOLATION=y
> 
> #
> # RCU Subsystem
> #
> CONFIG_TREE_RCU=y
> # CONFIG_RCU_EXPERT is not set
> CONFIG_SRCU=y
> CONFIG_TREE_SRCU=y
> CONFIG_TASKS_RCU_GENERIC=y
> CONFIG_TASKS_RUDE_RCU=y
> CONFIG_TASKS_TRACE_RCU=y
> CONFIG_RCU_STALL_COMMON=y
> CONFIG_RCU_NEED_SEGCBLIST=y
> CONFIG_RCU_NOCB_CPU=y
> # CONFIG_RCU_NOCB_CPU_DEFAULT_ALL is not set
> # end of RCU Subsystem
> 
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> # CONFIG_IKHEADERS is not set
> CONFIG_LOG_BUF_SHIFT=20
> CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
> CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
> # CONFIG_PRINTK_INDEX is not set
> CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
> 
> #
> # Scheduler features
> #
> # CONFIG_UCLAMP_TASK is not set
> # end of Scheduler features
> 
> CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
> CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
> CONFIG_CC_HAS_INT128=y
> CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
> CONFIG_GCC12_NO_ARRAY_BOUNDS=y
> CONFIG_ARCH_SUPPORTS_INT128=y
> CONFIG_NUMA_BALANCING=y
> CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
> CONFIG_CGROUPS=y
> CONFIG_PAGE_COUNTER=y
> # CONFIG_CGROUP_FAVOR_DYNMODS is not set
> CONFIG_MEMCG=y
> CONFIG_MEMCG_KMEM=y
> CONFIG_BLK_CGROUP=y
> CONFIG_CGROUP_WRITEBACK=y
> CONFIG_CGROUP_SCHED=y
> CONFIG_FAIR_GROUP_SCHED=y
> CONFIG_CFS_BANDWIDTH=y
> # CONFIG_RT_GROUP_SCHED is not set
> CONFIG_CGROUP_PIDS=y
> CONFIG_CGROUP_RDMA=y
> CONFIG_CGROUP_FREEZER=y
> CONFIG_CGROUP_HUGETLB=y
> CONFIG_CPUSETS=y
> CONFIG_PROC_PID_CPUSET=y
> CONFIG_CGROUP_DEVICE=y
> CONFIG_CGROUP_CPUACCT=y
> CONFIG_CGROUP_PERF=y
> # CONFIG_CGROUP_BPF is not set
> # CONFIG_CGROUP_MISC is not set
> # CONFIG_CGROUP_DEBUG is not set
> CONFIG_SOCK_CGROUP_DATA=y
> CONFIG_NAMESPACES=y
> CONFIG_UTS_NS=y
> CONFIG_TIME_NS=y
> CONFIG_IPC_NS=y
> CONFIG_USER_NS=y
> CONFIG_PID_NS=y
> CONFIG_NET_NS=y
> # CONFIG_CHECKPOINT_RESTORE is not set
> CONFIG_SCHED_AUTOGROUP=y
> # CONFIG_SYSFS_DEPRECATED is not set
> CONFIG_RELAY=y
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_INITRAMFS_SOURCE=""
> CONFIG_RD_GZIP=y
> CONFIG_RD_BZIP2=y
> CONFIG_RD_LZMA=y
> CONFIG_RD_XZ=y
> CONFIG_RD_LZO=y
> CONFIG_RD_LZ4=y
> CONFIG_RD_ZSTD=y
> # CONFIG_BOOT_CONFIG is not set
> CONFIG_INITRAMFS_PRESERVE_MTIME=y
> CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
> # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
> CONFIG_LD_ORPHAN_WARN=y
> CONFIG_SYSCTL=y
> CONFIG_HAVE_UID16=y
> CONFIG_SYSCTL_EXCEPTION_TRACE=y
> CONFIG_HAVE_PCSPKR_PLATFORM=y
> # CONFIG_EXPERT is not set
> CONFIG_UID16=y
> CONFIG_MULTIUSER=y
> CONFIG_SGETMASK_SYSCALL=y
> CONFIG_SYSFS_SYSCALL=y
> CONFIG_FHANDLE=y
> CONFIG_POSIX_TIMERS=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_ELF_CORE=y
> CONFIG_PCSPKR_PLATFORM=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_FUTEX_PI=y
> CONFIG_EPOLL=y
> CONFIG_SIGNALFD=y
> CONFIG_TIMERFD=y
> CONFIG_EVENTFD=y
> CONFIG_SHMEM=y
> CONFIG_AIO=y
> CONFIG_IO_URING=y
> CONFIG_ADVISE_SYSCALLS=y
> CONFIG_MEMBARRIER=y
> CONFIG_KALLSYMS=y
> CONFIG_KALLSYMS_ALL=y
> CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
> CONFIG_KALLSYMS_BASE_RELATIVE=y
> CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
> CONFIG_KCMP=y
> CONFIG_RSEQ=y
> # CONFIG_EMBEDDED is not set
> CONFIG_HAVE_PERF_EVENTS=y
> CONFIG_GUEST_PERF_EVENTS=y
> 
> #
> # Kernel Performance Events And Counters
> #
> CONFIG_PERF_EVENTS=y
> # CONFIG_DEBUG_PERF_USE_VMALLOC is not set
> # end of Kernel Performance Events And Counters
> 
> CONFIG_SYSTEM_DATA_VERIFICATION=y
> CONFIG_PROFILING=y
> CONFIG_TRACEPOINTS=y
> # end of General setup
> 
> CONFIG_64BIT=y
> CONFIG_X86_64=y
> CONFIG_X86=y
> CONFIG_INSTRUCTION_DECODER=y
> CONFIG_OUTPUT_FORMAT="elf64-x86-64"
> CONFIG_LOCKDEP_SUPPORT=y
> CONFIG_STACKTRACE_SUPPORT=y
> CONFIG_MMU=y
> CONFIG_ARCH_MMAP_RND_BITS_MIN=28
> CONFIG_ARCH_MMAP_RND_BITS_MAX=32
> CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
> CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_BUG=y
> CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_ARCH_HAS_CPU_RELAX=y
> CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> CONFIG_ARCH_NR_GPIO=1024
> CONFIG_ARCH_SUSPEND_POSSIBLE=y
> CONFIG_AUDIT_ARCH=y
> CONFIG_HAVE_INTEL_TXT=y
> CONFIG_X86_64_SMP=y
> CONFIG_ARCH_SUPPORTS_UPROBES=y
> CONFIG_FIX_EARLYCON_MEM=y
> CONFIG_DYNAMIC_PHYSICAL_MASK=y
> CONFIG_PGTABLE_LEVELS=5
> CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
> 
> #
> # Processor type and features
> #
> CONFIG_SMP=y
> CONFIG_X86_FEATURE_NAMES=y
> CONFIG_X86_X2APIC=y
> CONFIG_X86_MPPARSE=y
> # CONFIG_GOLDFISH is not set
> # CONFIG_X86_CPU_RESCTRL is not set
> CONFIG_X86_EXTENDED_PLATFORM=y
> # CONFIG_X86_NUMACHIP is not set
> # CONFIG_X86_VSMP is not set
> CONFIG_X86_UV=y
> # CONFIG_X86_GOLDFISH is not set
> # CONFIG_X86_INTEL_MID is not set
> CONFIG_X86_INTEL_LPSS=y
> # CONFIG_X86_AMD_PLATFORM_DEVICE is not set
> CONFIG_IOSF_MBI=y
> # CONFIG_IOSF_MBI_DEBUG is not set
> CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
> # CONFIG_SCHED_OMIT_FRAME_POINTER is not set
> CONFIG_HYPERVISOR_GUEST=y
> CONFIG_PARAVIRT=y
> # CONFIG_PARAVIRT_DEBUG is not set
> CONFIG_PARAVIRT_SPINLOCKS=y
> CONFIG_X86_HV_CALLBACK_VECTOR=y
> # CONFIG_XEN is not set
> CONFIG_KVM_GUEST=y
> CONFIG_ARCH_CPUIDLE_HALTPOLL=y
> # CONFIG_PVH is not set
> CONFIG_PARAVIRT_TIME_ACCOUNTING=y
> CONFIG_PARAVIRT_CLOCK=y
> # CONFIG_JAILHOUSE_GUEST is not set
> # CONFIG_ACRN_GUEST is not set
> CONFIG_INTEL_TDX_GUEST=y
> # CONFIG_MK8 is not set
> # CONFIG_MPSC is not set
> # CONFIG_MCORE2 is not set
> # CONFIG_MATOM is not set
> CONFIG_GENERIC_CPU=y
> CONFIG_X86_INTERNODE_CACHE_SHIFT=6
> CONFIG_X86_L1_CACHE_SHIFT=6
> CONFIG_X86_TSC=y
> CONFIG_X86_CMPXCHG64=y
> CONFIG_X86_CMOV=y
> CONFIG_X86_MINIMUM_CPU_FAMILY=64
> CONFIG_X86_DEBUGCTLMSR=y
> CONFIG_IA32_FEAT_CTL=y
> CONFIG_X86_VMX_FEATURE_NAMES=y
> CONFIG_CPU_SUP_INTEL=y
> CONFIG_CPU_SUP_AMD=y
> CONFIG_CPU_SUP_HYGON=y
> CONFIG_CPU_SUP_CENTAUR=y
> CONFIG_CPU_SUP_ZHAOXIN=y
> CONFIG_HPET_TIMER=y
> CONFIG_HPET_EMULATE_RTC=y
> CONFIG_DMI=y
> # CONFIG_GART_IOMMU is not set
> CONFIG_BOOT_VESA_SUPPORT=y
> CONFIG_MAXSMP=y
> CONFIG_NR_CPUS_RANGE_BEGIN=8192
> CONFIG_NR_CPUS_RANGE_END=8192
> CONFIG_NR_CPUS_DEFAULT=8192
> CONFIG_NR_CPUS=8192
> CONFIG_SCHED_CLUSTER=y
> CONFIG_SCHED_SMT=y
> CONFIG_SCHED_MC=y
> CONFIG_SCHED_MC_PRIO=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
> CONFIG_X86_MCE=y
> CONFIG_X86_MCELOG_LEGACY=y
> CONFIG_X86_MCE_INTEL=y
> # CONFIG_X86_MCE_AMD is not set
> CONFIG_X86_MCE_THRESHOLD=y
> CONFIG_X86_MCE_INJECT=m
> 
> #
> # Performance monitoring
> #
> CONFIG_PERF_EVENTS_INTEL_UNCORE=m
> CONFIG_PERF_EVENTS_INTEL_RAPL=m
> CONFIG_PERF_EVENTS_INTEL_CSTATE=m
> # CONFIG_PERF_EVENTS_AMD_POWER is not set
> # CONFIG_PERF_EVENTS_AMD_UNCORE is not set
> # CONFIG_PERF_EVENTS_AMD_BRS is not set
> # end of Performance monitoring
> 
> CONFIG_X86_16BIT=y
> CONFIG_X86_ESPFIX64=y
> CONFIG_X86_VSYSCALL_EMULATION=y
> CONFIG_X86_IOPL_IOPERM=y
> CONFIG_MICROCODE=y
> CONFIG_MICROCODE_INTEL=y
> # CONFIG_MICROCODE_AMD is not set
> CONFIG_MICROCODE_LATE_LOADING=y
> CONFIG_X86_MSR=y
> CONFIG_X86_CPUID=y
> CONFIG_X86_5LEVEL=y
> CONFIG_X86_DIRECT_GBPAGES=y
> # CONFIG_X86_CPA_STATISTICS is not set
> CONFIG_X86_MEM_ENCRYPT=y
> # CONFIG_AMD_MEM_ENCRYPT is not set
> CONFIG_NUMA=y
> # CONFIG_AMD_NUMA is not set
> CONFIG_X86_64_ACPI_NUMA=y
> CONFIG_NUMA_EMU=y
> CONFIG_NODES_SHIFT=10
> CONFIG_ARCH_SPARSEMEM_ENABLE=y
> CONFIG_ARCH_SPARSEMEM_DEFAULT=y
> # CONFIG_ARCH_MEMORY_PROBE is not set
> CONFIG_ARCH_PROC_KCORE_TEXT=y
> CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
> CONFIG_X86_PMEM_LEGACY_DEVICE=y
> CONFIG_X86_PMEM_LEGACY=m
> CONFIG_X86_CHECK_BIOS_CORRUPTION=y
> # CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
> CONFIG_MTRR=y
> CONFIG_MTRR_SANITIZER=y
> CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
> CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
> CONFIG_X86_PAT=y
> CONFIG_ARCH_USES_PG_UNCACHED=y
> CONFIG_X86_UMIP=y
> CONFIG_CC_HAS_IBT=y
> # CONFIG_X86_KERNEL_IBT is not set
> CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
> CONFIG_X86_INTEL_TSX_MODE_OFF=y
> # CONFIG_X86_INTEL_TSX_MODE_ON is not set
> # CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
> # CONFIG_X86_SGX is not set
> CONFIG_EFI=y
> CONFIG_EFI_STUB=y
> CONFIG_EFI_MIXED=y
> # CONFIG_HZ_100 is not set
> # CONFIG_HZ_250 is not set
> # CONFIG_HZ_300 is not set
> CONFIG_HZ_1000=y
> CONFIG_HZ=1000
> CONFIG_SCHED_HRTICK=y
> CONFIG_KEXEC=y
> CONFIG_KEXEC_FILE=y
> CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
> # CONFIG_KEXEC_SIG is not set
> CONFIG_CRASH_DUMP=y
> CONFIG_KEXEC_JUMP=y
> CONFIG_PHYSICAL_START=0x1000000
> CONFIG_RELOCATABLE=y
> # CONFIG_RANDOMIZE_BASE is not set
> CONFIG_PHYSICAL_ALIGN=0x200000
> CONFIG_DYNAMIC_MEMORY_LAYOUT=y
> CONFIG_HOTPLUG_CPU=y
> CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
> # CONFIG_DEBUG_HOTPLUG_CPU0 is not set
> # CONFIG_COMPAT_VDSO is not set
> CONFIG_LEGACY_VSYSCALL_XONLY=y
> # CONFIG_LEGACY_VSYSCALL_NONE is not set
> # CONFIG_CMDLINE_BOOL is not set
> CONFIG_MODIFY_LDT_SYSCALL=y
> # CONFIG_STRICT_SIGALTSTACK_SIZE is not set
> CONFIG_HAVE_LIVEPATCH=y
> CONFIG_LIVEPATCH=y
> # end of Processor type and features
> 
> CONFIG_CC_HAS_SLS=y
> CONFIG_CC_HAS_RETURN_THUNK=y
> CONFIG_SPECULATION_MITIGATIONS=y
> CONFIG_PAGE_TABLE_ISOLATION=y
> CONFIG_RETPOLINE=y
> CONFIG_RETHUNK=y
> CONFIG_CPU_UNRET_ENTRY=y
> CONFIG_CPU_IBPB_ENTRY=y
> CONFIG_CPU_IBRS_ENTRY=y
> # CONFIG_SLS is not set
> CONFIG_ARCH_HAS_ADD_PAGES=y
> CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
> 
> #
> # Power management and ACPI options
> #
> CONFIG_ARCH_HIBERNATION_HEADER=y
> CONFIG_SUSPEND=y
> CONFIG_SUSPEND_FREEZER=y
> CONFIG_HIBERNATE_CALLBACKS=y
> CONFIG_HIBERNATION=y
> CONFIG_HIBERNATION_SNAPSHOT_DEV=y
> CONFIG_PM_STD_PARTITION=""
> CONFIG_PM_SLEEP=y
> CONFIG_PM_SLEEP_SMP=y
> # CONFIG_PM_AUTOSLEEP is not set
> # CONFIG_PM_USERSPACE_AUTOSLEEP is not set
> # CONFIG_PM_WAKELOCKS is not set
> CONFIG_PM=y
> CONFIG_PM_DEBUG=y
> # CONFIG_PM_ADVANCED_DEBUG is not set
> # CONFIG_PM_TEST_SUSPEND is not set
> CONFIG_PM_SLEEP_DEBUG=y
> # CONFIG_PM_TRACE_RTC is not set
> CONFIG_PM_CLK=y
> # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
> # CONFIG_ENERGY_MODEL is not set
> CONFIG_ARCH_SUPPORTS_ACPI=y
> CONFIG_ACPI=y
> CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
> CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
> CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
> # CONFIG_ACPI_DEBUGGER is not set
> CONFIG_ACPI_SPCR_TABLE=y
> # CONFIG_ACPI_FPDT is not set
> CONFIG_ACPI_LPIT=y
> CONFIG_ACPI_SLEEP=y
> CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
> CONFIG_ACPI_EC_DEBUGFS=m
> CONFIG_ACPI_AC=y
> CONFIG_ACPI_BATTERY=y
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_VIDEO=m
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_TAD=m
> CONFIG_ACPI_DOCK=y
> CONFIG_ACPI_CPU_FREQ_PSS=y
> CONFIG_ACPI_PROCESSOR_CSTATE=y
> CONFIG_ACPI_PROCESSOR_IDLE=y
> CONFIG_ACPI_CPPC_LIB=y
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_IPMI=m
> CONFIG_ACPI_HOTPLUG_CPU=y
> CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
> CONFIG_ACPI_THERMAL=y
> CONFIG_ACPI_PLATFORM_PROFILE=m
> CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
> CONFIG_ACPI_TABLE_UPGRADE=y
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_PCI_SLOT=y
> CONFIG_ACPI_CONTAINER=y
> CONFIG_ACPI_HOTPLUG_MEMORY=y
> CONFIG_ACPI_HOTPLUG_IOAPIC=y
> CONFIG_ACPI_SBS=m
> CONFIG_ACPI_HED=y
> # CONFIG_ACPI_CUSTOM_METHOD is not set
> CONFIG_ACPI_BGRT=y
> CONFIG_ACPI_NFIT=m
> # CONFIG_NFIT_SECURITY_DEBUG is not set
> CONFIG_ACPI_NUMA=y
> # CONFIG_ACPI_HMAT is not set
> CONFIG_HAVE_ACPI_APEI=y
> CONFIG_HAVE_ACPI_APEI_NMI=y
> CONFIG_ACPI_APEI=y
> CONFIG_ACPI_APEI_GHES=y
> CONFIG_ACPI_APEI_PCIEAER=y
> CONFIG_ACPI_APEI_MEMORY_FAILURE=y
> CONFIG_ACPI_APEI_EINJ=m
> # CONFIG_ACPI_APEI_ERST_DEBUG is not set
> # CONFIG_ACPI_DPTF is not set
> CONFIG_ACPI_WATCHDOG=y
> CONFIG_ACPI_EXTLOG=m
> CONFIG_ACPI_ADXL=y
> # CONFIG_ACPI_CONFIGFS is not set
> # CONFIG_ACPI_PFRUT is not set
> CONFIG_ACPI_PCC=y
> CONFIG_PMIC_OPREGION=y
> CONFIG_ACPI_PRMT=y
> CONFIG_X86_PM_TIMER=y
> 
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_GOV_ATTR_SET=y
> CONFIG_CPU_FREQ_GOV_COMMON=y
> CONFIG_CPU_FREQ_STAT=y
> CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> CONFIG_CPU_FREQ_GOV_USERSPACE=y
> CONFIG_CPU_FREQ_GOV_ONDEMAND=y
> CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
> CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
> 
> #
> # CPU frequency scaling drivers
> #
> CONFIG_X86_INTEL_PSTATE=y
> # CONFIG_X86_PCC_CPUFREQ is not set
> # CONFIG_X86_AMD_PSTATE is not set
> # CONFIG_X86_AMD_PSTATE_UT is not set
> CONFIG_X86_ACPI_CPUFREQ=m
> CONFIG_X86_ACPI_CPUFREQ_CPB=y
> # CONFIG_X86_POWERNOW_K8 is not set
> # CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
> # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
> CONFIG_X86_P4_CLOCKMOD=m
> 
> #
> # shared options
> #
> CONFIG_X86_SPEEDSTEP_LIB=m
> # end of CPU Frequency scaling
> 
> #
> # CPU Idle
> #
> CONFIG_CPU_IDLE=y
> # CONFIG_CPU_IDLE_GOV_LADDER is not set
> CONFIG_CPU_IDLE_GOV_MENU=y
> # CONFIG_CPU_IDLE_GOV_TEO is not set
> # CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
> CONFIG_HALTPOLL_CPUIDLE=y
> # end of CPU Idle
> 
> CONFIG_INTEL_IDLE=y
> # end of Power management and ACPI options
> 
> #
> # Bus options (PCI etc.)
> #
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_MMCONFIG=y
> CONFIG_MMCONF_FAM10H=y
> CONFIG_ISA_DMA_API=y
> CONFIG_AMD_NB=y
> # end of Bus options (PCI etc.)
> 
> #
> # Binary Emulations
> #
> CONFIG_IA32_EMULATION=y
> # CONFIG_X86_X32_ABI is not set
> CONFIG_COMPAT_32=y
> CONFIG_COMPAT=y
> CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
> # end of Binary Emulations
> 
> CONFIG_HAVE_KVM=y
> CONFIG_HAVE_KVM_PFNCACHE=y
> CONFIG_HAVE_KVM_IRQCHIP=y
> CONFIG_HAVE_KVM_IRQFD=y
> CONFIG_HAVE_KVM_IRQ_ROUTING=y
> CONFIG_HAVE_KVM_DIRTY_RING=y
> CONFIG_HAVE_KVM_DIRTY_RING_TSO=y
> CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL=y
> CONFIG_HAVE_KVM_EVENTFD=y
> CONFIG_KVM_MMIO=y
> CONFIG_KVM_ASYNC_PF=y
> CONFIG_HAVE_KVM_MSI=y
> CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
> CONFIG_KVM_VFIO=y
> CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
> CONFIG_KVM_COMPAT=y
> CONFIG_HAVE_KVM_IRQ_BYPASS=y
> CONFIG_HAVE_KVM_NO_POLL=y
> CONFIG_KVM_XFER_TO_GUEST_WORK=y
> CONFIG_HAVE_KVM_PM_NOTIFIER=y
> CONFIG_VIRTUALIZATION=y
> CONFIG_KVM=m
> CONFIG_KVM_INTEL=m
> # CONFIG_KVM_AMD is not set
> # CONFIG_KVM_XEN is not set
> CONFIG_AS_AVX512=y
> CONFIG_AS_SHA1_NI=y
> CONFIG_AS_SHA256_NI=y
> CONFIG_AS_TPAUSE=y
> 
> #
> # General architecture-dependent options
> #
> CONFIG_CRASH_CORE=y
> CONFIG_KEXEC_CORE=y
> CONFIG_HOTPLUG_SMT=y
> CONFIG_GENERIC_ENTRY=y
> CONFIG_KPROBES=y
> CONFIG_JUMP_LABEL=y
> # CONFIG_STATIC_KEYS_SELFTEST is not set
> # CONFIG_STATIC_CALL_SELFTEST is not set
> CONFIG_OPTPROBES=y
> CONFIG_KPROBES_ON_FTRACE=y
> CONFIG_UPROBES=y
> CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
> CONFIG_ARCH_USE_BUILTIN_BSWAP=y
> CONFIG_KRETPROBES=y
> CONFIG_KRETPROBE_ON_RETHOOK=y
> CONFIG_USER_RETURN_NOTIFIER=y
> CONFIG_HAVE_IOREMAP_PROT=y
> CONFIG_HAVE_KPROBES=y
> CONFIG_HAVE_KRETPROBES=y
> CONFIG_HAVE_OPTPROBES=y
> CONFIG_HAVE_KPROBES_ON_FTRACE=y
> CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
> CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
> CONFIG_HAVE_NMI=y
> CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
> CONFIG_HAVE_ARCH_TRACEHOOK=y
> CONFIG_HAVE_DMA_CONTIGUOUS=y
> CONFIG_GENERIC_SMP_IDLE_THREAD=y
> CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
> CONFIG_ARCH_HAS_SET_MEMORY=y
> CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
> CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
> CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
> CONFIG_ARCH_WANTS_NO_INSTR=y
> CONFIG_HAVE_ASM_MODVERSIONS=y
> CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
> CONFIG_HAVE_RSEQ=y
> CONFIG_HAVE_RUST=y
> CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
> CONFIG_HAVE_HW_BREAKPOINT=y
> CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
> CONFIG_HAVE_USER_RETURN_NOTIFIER=y
> CONFIG_HAVE_PERF_EVENTS_NMI=y
> CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
> CONFIG_HAVE_PERF_REGS=y
> CONFIG_HAVE_PERF_USER_STACK_DUMP=y
> CONFIG_HAVE_ARCH_JUMP_LABEL=y
> CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
> CONFIG_MMU_GATHER_TABLE_FREE=y
> CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
> CONFIG_MMU_GATHER_MERGE_VMAS=y
> CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
> CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
> CONFIG_HAVE_CMPXCHG_LOCAL=y
> CONFIG_HAVE_CMPXCHG_DOUBLE=y
> CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
> CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
> CONFIG_HAVE_ARCH_SECCOMP=y
> CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
> CONFIG_SECCOMP=y
> CONFIG_SECCOMP_FILTER=y
> # CONFIG_SECCOMP_CACHE_DEBUG is not set
> CONFIG_HAVE_ARCH_STACKLEAK=y
> CONFIG_HAVE_STACKPROTECTOR=y
> CONFIG_STACKPROTECTOR=y
> CONFIG_STACKPROTECTOR_STRONG=y
> CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
> CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
> CONFIG_LTO_NONE=y
> CONFIG_ARCH_SUPPORTS_CFI_CLANG=y
> CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
> CONFIG_HAVE_CONTEXT_TRACKING_USER=y
> CONFIG_HAVE_CONTEXT_TRACKING_USER_OFFSTACK=y
> CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
> CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
> CONFIG_HAVE_MOVE_PUD=y
> CONFIG_HAVE_MOVE_PMD=y
> CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
> CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
> CONFIG_HAVE_ARCH_HUGE_VMAP=y
> CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
> CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
> CONFIG_HAVE_ARCH_SOFT_DIRTY=y
> CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
> CONFIG_MODULES_USE_ELF_RELA=y
> CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
> CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
> CONFIG_SOFTIRQ_ON_OWN_STACK=y
> CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
> CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
> CONFIG_HAVE_EXIT_THREAD=y
> CONFIG_ARCH_MMAP_RND_BITS=28
> CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
> CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
> CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
> CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
> CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
> CONFIG_HAVE_OBJTOOL=y
> CONFIG_HAVE_JUMP_LABEL_HACK=y
> CONFIG_HAVE_NOINSTR_HACK=y
> CONFIG_HAVE_NOINSTR_VALIDATION=y
> CONFIG_HAVE_UACCESS_VALIDATION=y
> CONFIG_HAVE_STACK_VALIDATION=y
> CONFIG_HAVE_RELIABLE_STACKTRACE=y
> CONFIG_OLD_SIGSUSPEND3=y
> CONFIG_COMPAT_OLD_SIGACTION=y
> CONFIG_COMPAT_32BIT_TIME=y
> CONFIG_HAVE_ARCH_VMAP_STACK=y
> CONFIG_VMAP_STACK=y
> CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
> CONFIG_RANDOMIZE_KSTACK_OFFSET=y
> # CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set
> CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
> CONFIG_STRICT_KERNEL_RWX=y
> CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
> CONFIG_STRICT_MODULE_RWX=y
> CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
> CONFIG_ARCH_USE_MEMREMAP_PROT=y
> # CONFIG_LOCK_EVENT_COUNTS is not set
> CONFIG_ARCH_HAS_MEM_ENCRYPT=y
> CONFIG_ARCH_HAS_CC_PLATFORM=y
> CONFIG_HAVE_STATIC_CALL=y
> CONFIG_HAVE_STATIC_CALL_INLINE=y
> CONFIG_HAVE_PREEMPT_DYNAMIC=y
> CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
> CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
> CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
> CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
> CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
> CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
> CONFIG_DYNAMIC_SIGFRAME=y
> CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y
> 
> #
> # GCOV-based kernel profiling
> #
> # CONFIG_GCOV_KERNEL is not set
> CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
> # end of GCOV-based kernel profiling
> 
> CONFIG_HAVE_GCC_PLUGINS=y
> CONFIG_GCC_PLUGINS=y
> # CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
> # end of General architecture-dependent options
> 
> CONFIG_RT_MUTEXES=y
> CONFIG_BASE_SMALL=0
> CONFIG_MODULE_SIG_FORMAT=y
> CONFIG_MODULES=y
> CONFIG_MODULE_FORCE_LOAD=y
> CONFIG_MODULE_UNLOAD=y
> # CONFIG_MODULE_FORCE_UNLOAD is not set
> # CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
> # CONFIG_MODVERSIONS is not set
> # CONFIG_MODULE_SRCVERSION_ALL is not set
> CONFIG_MODULE_SIG=y
> # CONFIG_MODULE_SIG_FORCE is not set
> CONFIG_MODULE_SIG_ALL=y
> # CONFIG_MODULE_SIG_SHA1 is not set
> # CONFIG_MODULE_SIG_SHA224 is not set
> CONFIG_MODULE_SIG_SHA256=y
> # CONFIG_MODULE_SIG_SHA384 is not set
> # CONFIG_MODULE_SIG_SHA512 is not set
> CONFIG_MODULE_SIG_HASH="sha256"
> CONFIG_MODULE_COMPRESS_NONE=y
> # CONFIG_MODULE_COMPRESS_GZIP is not set
> # CONFIG_MODULE_COMPRESS_XZ is not set
> # CONFIG_MODULE_COMPRESS_ZSTD is not set
> # CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
> CONFIG_MODPROBE_PATH="/sbin/modprobe"
> CONFIG_MODULES_TREE_LOOKUP=y
> CONFIG_BLOCK=y
> CONFIG_BLOCK_LEGACY_AUTOLOAD=y
> CONFIG_BLK_CGROUP_RWSTAT=y
> CONFIG_BLK_DEV_BSG_COMMON=y
> CONFIG_BLK_ICQ=y
> CONFIG_BLK_DEV_BSGLIB=y
> CONFIG_BLK_DEV_INTEGRITY=y
> CONFIG_BLK_DEV_INTEGRITY_T10=m
> # CONFIG_BLK_DEV_ZONED is not set
> CONFIG_BLK_DEV_THROTTLING=y
> # CONFIG_BLK_DEV_THROTTLING_LOW is not set
> CONFIG_BLK_WBT=y
> CONFIG_BLK_WBT_MQ=y
> # CONFIG_BLK_CGROUP_IOLATENCY is not set
> # CONFIG_BLK_CGROUP_IOCOST is not set
> # CONFIG_BLK_CGROUP_IOPRIO is not set
> CONFIG_BLK_DEBUG_FS=y
> # CONFIG_BLK_SED_OPAL is not set
> # CONFIG_BLK_INLINE_ENCRYPTION is not set
> 
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> CONFIG_EFI_PARTITION=y
> # end of Partition Types
> 
> CONFIG_BLOCK_COMPAT=y
> CONFIG_BLK_MQ_PCI=y
> CONFIG_BLK_MQ_VIRTIO=y
> CONFIG_BLK_PM=y
> CONFIG_BLOCK_HOLDER_DEPRECATED=y
> CONFIG_BLK_MQ_STACKING=y
> 
> #
> # IO Schedulers
> #
> CONFIG_MQ_IOSCHED_DEADLINE=y
> CONFIG_MQ_IOSCHED_KYBER=y
> CONFIG_IOSCHED_BFQ=y
> CONFIG_BFQ_GROUP_IOSCHED=y
> # CONFIG_BFQ_CGROUP_DEBUG is not set
> # end of IO Schedulers
> 
> CONFIG_PREEMPT_NOTIFIERS=y
> CONFIG_PADATA=y
> CONFIG_ASN1=y
> CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
> CONFIG_INLINE_READ_UNLOCK=y
> CONFIG_INLINE_READ_UNLOCK_IRQ=y
> CONFIG_INLINE_WRITE_UNLOCK=y
> CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
> CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
> CONFIG_MUTEX_SPIN_ON_OWNER=y
> CONFIG_RWSEM_SPIN_ON_OWNER=y
> CONFIG_LOCK_SPIN_ON_OWNER=y
> CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
> CONFIG_QUEUED_SPINLOCKS=y
> CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
> CONFIG_QUEUED_RWLOCKS=y
> CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
> CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
> CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
> CONFIG_FREEZER=y
> 
> #
> # Executable file formats
> #
> CONFIG_BINFMT_ELF=y
> CONFIG_COMPAT_BINFMT_ELF=y
> CONFIG_ELFCORE=y
> CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
> CONFIG_BINFMT_SCRIPT=y
> CONFIG_BINFMT_MISC=m
> CONFIG_COREDUMP=y
> # end of Executable file formats
> 
> #
> # Memory Management options
> #
> CONFIG_ZPOOL=y
> CONFIG_SWAP=y
> CONFIG_ZSWAP=y
> # CONFIG_ZSWAP_DEFAULT_ON is not set
> # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
> CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
> # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
> # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
> # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
> # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
> CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
> CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
> # CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
> # CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
> CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
> CONFIG_ZBUD=y
> # CONFIG_Z3FOLD is not set
> CONFIG_ZSMALLOC=y
> CONFIG_ZSMALLOC_STAT=y
> 
> #
> # SLAB allocator options
> #
> # CONFIG_SLAB is not set
> CONFIG_SLUB=y
> CONFIG_SLAB_MERGE_DEFAULT=y
> CONFIG_SLAB_FREELIST_RANDOM=y
> # CONFIG_SLAB_FREELIST_HARDENED is not set
> # CONFIG_SLUB_STATS is not set
> CONFIG_SLUB_CPU_PARTIAL=y
> # end of SLAB allocator options
> 
> CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
> # CONFIG_COMPAT_BRK is not set
> CONFIG_SPARSEMEM=y
> CONFIG_SPARSEMEM_EXTREME=y
> CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
> CONFIG_SPARSEMEM_VMEMMAP=y
> CONFIG_HAVE_FAST_GUP=y
> CONFIG_NUMA_KEEP_MEMINFO=y
> CONFIG_MEMORY_ISOLATION=y
> CONFIG_EXCLUSIVE_SYSTEM_RAM=y
> CONFIG_HAVE_BOOTMEM_INFO_NODE=y
> CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
> CONFIG_MEMORY_HOTPLUG=y
> # CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
> CONFIG_MEMORY_HOTREMOVE=y
> CONFIG_MHP_MEMMAP_ON_MEMORY=y
> CONFIG_SPLIT_PTLOCK_CPUS=4
> CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
> CONFIG_MEMORY_BALLOON=y
> CONFIG_BALLOON_COMPACTION=y
> CONFIG_COMPACTION=y
> CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
> CONFIG_PAGE_REPORTING=y
> CONFIG_MIGRATION=y
> CONFIG_DEVICE_MIGRATION=y
> CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
> CONFIG_ARCH_ENABLE_THP_MIGRATION=y
> CONFIG_CONTIG_ALLOC=y
> CONFIG_PHYS_ADDR_T_64BIT=y
> CONFIG_MMU_NOTIFIER=y
> CONFIG_KSM=y
> CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
> CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
> CONFIG_MEMORY_FAILURE=y
> CONFIG_HWPOISON_INJECT=m
> CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
> CONFIG_ARCH_WANTS_THP_SWAP=y
> CONFIG_TRANSPARENT_HUGEPAGE=y
> CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
> # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
> CONFIG_THP_SWAP=y
> # CONFIG_READ_ONLY_THP_FOR_FS is not set
> CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
> CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
> CONFIG_USE_PERCPU_NUMA_NODE_ID=y
> CONFIG_HAVE_SETUP_PER_CPU_AREA=y
> CONFIG_FRONTSWAP=y
> # CONFIG_CMA is not set
> CONFIG_GENERIC_EARLY_IOREMAP=y
> CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
> CONFIG_PAGE_IDLE_FLAG=y
> CONFIG_IDLE_PAGE_TRACKING=y
> CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
> CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
> CONFIG_ARCH_HAS_PTE_DEVMAP=y
> CONFIG_ZONE_DMA=y
> CONFIG_ZONE_DMA32=y
> CONFIG_ZONE_DEVICE=y
> CONFIG_GET_FREE_REGION=y
> CONFIG_DEVICE_PRIVATE=y
> CONFIG_VMAP_PFN=y
> CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
> CONFIG_ARCH_HAS_PKEYS=y
> CONFIG_VM_EVENT_COUNTERS=y
> # CONFIG_PERCPU_STATS is not set
> # CONFIG_GUP_TEST is not set
> CONFIG_ARCH_HAS_PTE_SPECIAL=y
> CONFIG_SECRETMEM=y
> # CONFIG_ANON_VMA_NAME is not set
> # CONFIG_USERFAULTFD is not set
> # CONFIG_LRU_GEN is not set
> 
> #
> # Data Access Monitoring
> #
> # CONFIG_DAMON is not set
> # end of Data Access Monitoring
> # end of Memory Management options
> 
> CONFIG_NET=y
> CONFIG_NET_INGRESS=y
> CONFIG_NET_EGRESS=y
> CONFIG_SKB_EXTENSIONS=y
> 
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_PACKET_DIAG=m
> CONFIG_UNIX=y
> CONFIG_UNIX_SCM=y
> CONFIG_AF_UNIX_OOB=y
> CONFIG_UNIX_DIAG=m
> CONFIG_TLS=m
> CONFIG_TLS_DEVICE=y
> # CONFIG_TLS_TOE is not set
> CONFIG_XFRM=y
> CONFIG_XFRM_OFFLOAD=y
> CONFIG_XFRM_ALGO=y
> CONFIG_XFRM_USER=y
> # CONFIG_XFRM_USER_COMPAT is not set
> # CONFIG_XFRM_INTERFACE is not set
> CONFIG_XFRM_SUB_POLICY=y
> CONFIG_XFRM_MIGRATE=y
> CONFIG_XFRM_STATISTICS=y
> CONFIG_XFRM_AH=m
> CONFIG_XFRM_ESP=m
> CONFIG_XFRM_IPCOMP=m
> CONFIG_NET_KEY=m
> CONFIG_NET_KEY_MIGRATE=y
> CONFIG_XDP_SOCKETS=y
> # CONFIG_XDP_SOCKETS_DIAG is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> CONFIG_IP_FIB_TRIE_STATS=y
> CONFIG_IP_MULTIPLE_TABLES=y
> CONFIG_IP_ROUTE_MULTIPATH=y
> CONFIG_IP_ROUTE_VERBOSE=y
> CONFIG_IP_ROUTE_CLASSID=y
> CONFIG_IP_PNP=y
> CONFIG_IP_PNP_DHCP=y
> # CONFIG_IP_PNP_BOOTP is not set
> # CONFIG_IP_PNP_RARP is not set
> CONFIG_NET_IPIP=m
> CONFIG_NET_IPGRE_DEMUX=m
> CONFIG_NET_IP_TUNNEL=m
> CONFIG_NET_IPGRE=m
> CONFIG_NET_IPGRE_BROADCAST=y
> CONFIG_IP_MROUTE_COMMON=y
> CONFIG_IP_MROUTE=y
> CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
> CONFIG_IP_PIMSM_V1=y
> CONFIG_IP_PIMSM_V2=y
> CONFIG_SYN_COOKIES=y
> CONFIG_NET_IPVTI=m
> CONFIG_NET_UDP_TUNNEL=m
> # CONFIG_NET_FOU is not set
> # CONFIG_NET_FOU_IP_TUNNELS is not set
> CONFIG_INET_AH=m
> CONFIG_INET_ESP=m
> CONFIG_INET_ESP_OFFLOAD=m
> # CONFIG_INET_ESPINTCP is not set
> CONFIG_INET_IPCOMP=m
> CONFIG_INET_XFRM_TUNNEL=m
> CONFIG_INET_TUNNEL=m
> CONFIG_INET_DIAG=m
> CONFIG_INET_TCP_DIAG=m
> CONFIG_INET_UDP_DIAG=m
> CONFIG_INET_RAW_DIAG=m
> # CONFIG_INET_DIAG_DESTROY is not set
> CONFIG_TCP_CONG_ADVANCED=y
> CONFIG_TCP_CONG_BIC=m
> CONFIG_TCP_CONG_CUBIC=y
> CONFIG_TCP_CONG_WESTWOOD=m
> CONFIG_TCP_CONG_HTCP=m
> CONFIG_TCP_CONG_HSTCP=m
> CONFIG_TCP_CONG_HYBLA=m
> CONFIG_TCP_CONG_VEGAS=m
> CONFIG_TCP_CONG_NV=m
> CONFIG_TCP_CONG_SCALABLE=m
> CONFIG_TCP_CONG_LP=m
> CONFIG_TCP_CONG_VENO=m
> CONFIG_TCP_CONG_YEAH=m
> CONFIG_TCP_CONG_ILLINOIS=m
> CONFIG_TCP_CONG_DCTCP=m
> # CONFIG_TCP_CONG_CDG is not set
> CONFIG_TCP_CONG_BBR=m
> CONFIG_DEFAULT_CUBIC=y
> # CONFIG_DEFAULT_RENO is not set
> CONFIG_DEFAULT_TCP_CONG="cubic"
> CONFIG_TCP_MD5SIG=y
> CONFIG_IPV6=y
> CONFIG_IPV6_ROUTER_PREF=y
> CONFIG_IPV6_ROUTE_INFO=y
> CONFIG_IPV6_OPTIMISTIC_DAD=y
> CONFIG_INET6_AH=m
> CONFIG_INET6_ESP=m
> CONFIG_INET6_ESP_OFFLOAD=m
> # CONFIG_INET6_ESPINTCP is not set
> CONFIG_INET6_IPCOMP=m
> CONFIG_IPV6_MIP6=m
> # CONFIG_IPV6_ILA is not set
> CONFIG_INET6_XFRM_TUNNEL=m
> CONFIG_INET6_TUNNEL=m
> CONFIG_IPV6_VTI=m
> CONFIG_IPV6_SIT=m
> CONFIG_IPV6_SIT_6RD=y
> CONFIG_IPV6_NDISC_NODETYPE=y
> CONFIG_IPV6_TUNNEL=m
> CONFIG_IPV6_GRE=m
> CONFIG_IPV6_MULTIPLE_TABLES=y
> # CONFIG_IPV6_SUBTREES is not set
> CONFIG_IPV6_MROUTE=y
> CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
> CONFIG_IPV6_PIMSM_V2=y
> # CONFIG_IPV6_SEG6_LWTUNNEL is not set
> # CONFIG_IPV6_SEG6_HMAC is not set
> # CONFIG_IPV6_RPL_LWTUNNEL is not set
> # CONFIG_IPV6_IOAM6_LWTUNNEL is not set
> CONFIG_NETLABEL=y
> # CONFIG_MPTCP is not set
> CONFIG_NETWORK_SECMARK=y
> CONFIG_NET_PTP_CLASSIFY=y
> CONFIG_NETWORK_PHY_TIMESTAMPING=y
> CONFIG_NETFILTER=y
> CONFIG_NETFILTER_ADVANCED=y
> CONFIG_BRIDGE_NETFILTER=m
> 
> #
> # Core Netfilter Configuration
> #
> CONFIG_NETFILTER_INGRESS=y
> CONFIG_NETFILTER_EGRESS=y
> CONFIG_NETFILTER_SKIP_EGRESS=y
> CONFIG_NETFILTER_NETLINK=m
> CONFIG_NETFILTER_FAMILY_BRIDGE=y
> CONFIG_NETFILTER_FAMILY_ARP=y
> # CONFIG_NETFILTER_NETLINK_HOOK is not set
> # CONFIG_NETFILTER_NETLINK_ACCT is not set
> CONFIG_NETFILTER_NETLINK_QUEUE=m
> CONFIG_NETFILTER_NETLINK_LOG=m
> CONFIG_NETFILTER_NETLINK_OSF=m
> CONFIG_NF_CONNTRACK=m
> CONFIG_NF_LOG_SYSLOG=m
> CONFIG_NETFILTER_CONNCOUNT=m
> CONFIG_NF_CONNTRACK_MARK=y
> CONFIG_NF_CONNTRACK_SECMARK=y
> CONFIG_NF_CONNTRACK_ZONES=y
> CONFIG_NF_CONNTRACK_PROCFS=y
> CONFIG_NF_CONNTRACK_EVENTS=y
> CONFIG_NF_CONNTRACK_TIMEOUT=y
> CONFIG_NF_CONNTRACK_TIMESTAMP=y
> CONFIG_NF_CONNTRACK_LABELS=y
> CONFIG_NF_CT_PROTO_DCCP=y
> CONFIG_NF_CT_PROTO_GRE=y
> CONFIG_NF_CT_PROTO_SCTP=y
> CONFIG_NF_CT_PROTO_UDPLITE=y
> CONFIG_NF_CONNTRACK_AMANDA=m
> CONFIG_NF_CONNTRACK_FTP=m
> CONFIG_NF_CONNTRACK_H323=m
> CONFIG_NF_CONNTRACK_IRC=m
> CONFIG_NF_CONNTRACK_BROADCAST=m
> CONFIG_NF_CONNTRACK_NETBIOS_NS=m
> CONFIG_NF_CONNTRACK_SNMP=m
> CONFIG_NF_CONNTRACK_PPTP=m
> CONFIG_NF_CONNTRACK_SANE=m
> CONFIG_NF_CONNTRACK_SIP=m
> CONFIG_NF_CONNTRACK_TFTP=m
> CONFIG_NF_CT_NETLINK=m
> CONFIG_NF_CT_NETLINK_TIMEOUT=m
> CONFIG_NF_CT_NETLINK_HELPER=m
> CONFIG_NETFILTER_NETLINK_GLUE_CT=y
> CONFIG_NF_NAT=m
> CONFIG_NF_NAT_AMANDA=m
> CONFIG_NF_NAT_FTP=m
> CONFIG_NF_NAT_IRC=m
> CONFIG_NF_NAT_SIP=m
> CONFIG_NF_NAT_TFTP=m
> CONFIG_NF_NAT_REDIRECT=y
> CONFIG_NF_NAT_MASQUERADE=y
> CONFIG_NETFILTER_SYNPROXY=m
> CONFIG_NF_TABLES=m
> CONFIG_NF_TABLES_INET=y
> CONFIG_NF_TABLES_NETDEV=y
> CONFIG_NFT_NUMGEN=m
> CONFIG_NFT_CT=m
> CONFIG_NFT_CONNLIMIT=m
> CONFIG_NFT_LOG=m
> CONFIG_NFT_LIMIT=m
> CONFIG_NFT_MASQ=m
> CONFIG_NFT_REDIR=m
> CONFIG_NFT_NAT=m
> # CONFIG_NFT_TUNNEL is not set
> CONFIG_NFT_OBJREF=m
> CONFIG_NFT_QUEUE=m
> CONFIG_NFT_QUOTA=m
> CONFIG_NFT_REJECT=m
> CONFIG_NFT_REJECT_INET=m
> CONFIG_NFT_COMPAT=m
> CONFIG_NFT_HASH=m
> CONFIG_NFT_FIB=m
> CONFIG_NFT_FIB_INET=m
> # CONFIG_NFT_XFRM is not set
> CONFIG_NFT_SOCKET=m
> # CONFIG_NFT_OSF is not set
> # CONFIG_NFT_TPROXY is not set
> # CONFIG_NFT_SYNPROXY is not set
> CONFIG_NF_DUP_NETDEV=m
> CONFIG_NFT_DUP_NETDEV=m
> CONFIG_NFT_FWD_NETDEV=m
> CONFIG_NFT_FIB_NETDEV=m
> # CONFIG_NFT_REJECT_NETDEV is not set
> # CONFIG_NF_FLOW_TABLE is not set
> CONFIG_NETFILTER_XTABLES=y
> CONFIG_NETFILTER_XTABLES_COMPAT=y
> 
> #
> # Xtables combined modules
> #
> CONFIG_NETFILTER_XT_MARK=m
> CONFIG_NETFILTER_XT_CONNMARK=m
> CONFIG_NETFILTER_XT_SET=m
> 
> #
> # Xtables targets
> #
> CONFIG_NETFILTER_XT_TARGET_AUDIT=m
> CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
> CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
> CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
> CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
> CONFIG_NETFILTER_XT_TARGET_CT=m
> CONFIG_NETFILTER_XT_TARGET_DSCP=m
> CONFIG_NETFILTER_XT_TARGET_HL=m
> CONFIG_NETFILTER_XT_TARGET_HMARK=m
> CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
> # CONFIG_NETFILTER_XT_TARGET_LED is not set
> CONFIG_NETFILTER_XT_TARGET_LOG=m
> CONFIG_NETFILTER_XT_TARGET_MARK=m
> CONFIG_NETFILTER_XT_NAT=m
> CONFIG_NETFILTER_XT_TARGET_NETMAP=m
> CONFIG_NETFILTER_XT_TARGET_NFLOG=m
> CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
> CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
> CONFIG_NETFILTER_XT_TARGET_RATEEST=m
> CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
> CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
> CONFIG_NETFILTER_XT_TARGET_TEE=m
> CONFIG_NETFILTER_XT_TARGET_TPROXY=m
> CONFIG_NETFILTER_XT_TARGET_TRACE=m
> CONFIG_NETFILTER_XT_TARGET_SECMARK=m
> CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
> CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
> 
> #
> # Xtables matches
> #
> CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
> CONFIG_NETFILTER_XT_MATCH_BPF=m
> CONFIG_NETFILTER_XT_MATCH_CGROUP=m
> CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
> CONFIG_NETFILTER_XT_MATCH_COMMENT=m
> CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
> CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
> CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
> CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
> CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
> CONFIG_NETFILTER_XT_MATCH_CPU=m
> CONFIG_NETFILTER_XT_MATCH_DCCP=m
> CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
> CONFIG_NETFILTER_XT_MATCH_DSCP=m
> CONFIG_NETFILTER_XT_MATCH_ECN=m
> CONFIG_NETFILTER_XT_MATCH_ESP=m
> CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
> CONFIG_NETFILTER_XT_MATCH_HELPER=m
> CONFIG_NETFILTER_XT_MATCH_HL=m
> # CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
> CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
> CONFIG_NETFILTER_XT_MATCH_IPVS=m
> # CONFIG_NETFILTER_XT_MATCH_L2TP is not set
> CONFIG_NETFILTER_XT_MATCH_LENGTH=m
> CONFIG_NETFILTER_XT_MATCH_LIMIT=m
> CONFIG_NETFILTER_XT_MATCH_MAC=m
> CONFIG_NETFILTER_XT_MATCH_MARK=m
> CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
> # CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
> CONFIG_NETFILTER_XT_MATCH_OSF=m
> CONFIG_NETFILTER_XT_MATCH_OWNER=m
> CONFIG_NETFILTER_XT_MATCH_POLICY=m
> CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
> CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
> CONFIG_NETFILTER_XT_MATCH_QUOTA=m
> CONFIG_NETFILTER_XT_MATCH_RATEEST=m
> CONFIG_NETFILTER_XT_MATCH_REALM=m
> CONFIG_NETFILTER_XT_MATCH_RECENT=m
> CONFIG_NETFILTER_XT_MATCH_SCTP=m
> CONFIG_NETFILTER_XT_MATCH_SOCKET=m
> CONFIG_NETFILTER_XT_MATCH_STATE=m
> CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
> CONFIG_NETFILTER_XT_MATCH_STRING=m
> CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
> # CONFIG_NETFILTER_XT_MATCH_TIME is not set
> # CONFIG_NETFILTER_XT_MATCH_U32 is not set
> # end of Core Netfilter Configuration
> 
> CONFIG_IP_SET=m
> CONFIG_IP_SET_MAX=256
> CONFIG_IP_SET_BITMAP_IP=m
> CONFIG_IP_SET_BITMAP_IPMAC=m
> CONFIG_IP_SET_BITMAP_PORT=m
> CONFIG_IP_SET_HASH_IP=m
> CONFIG_IP_SET_HASH_IPMARK=m
> CONFIG_IP_SET_HASH_IPPORT=m
> CONFIG_IP_SET_HASH_IPPORTIP=m
> CONFIG_IP_SET_HASH_IPPORTNET=m
> CONFIG_IP_SET_HASH_IPMAC=m
> CONFIG_IP_SET_HASH_MAC=m
> CONFIG_IP_SET_HASH_NETPORTNET=m
> CONFIG_IP_SET_HASH_NET=m
> CONFIG_IP_SET_HASH_NETNET=m
> CONFIG_IP_SET_HASH_NETPORT=m
> CONFIG_IP_SET_HASH_NETIFACE=m
> CONFIG_IP_SET_LIST_SET=m
> CONFIG_IP_VS=m
> CONFIG_IP_VS_IPV6=y
> # CONFIG_IP_VS_DEBUG is not set
> CONFIG_IP_VS_TAB_BITS=12
> 
> #
> # IPVS transport protocol load balancing support
> #
> CONFIG_IP_VS_PROTO_TCP=y
> CONFIG_IP_VS_PROTO_UDP=y
> CONFIG_IP_VS_PROTO_AH_ESP=y
> CONFIG_IP_VS_PROTO_ESP=y
> CONFIG_IP_VS_PROTO_AH=y
> CONFIG_IP_VS_PROTO_SCTP=y
> 
> #
> # IPVS scheduler
> #
> CONFIG_IP_VS_RR=m
> CONFIG_IP_VS_WRR=m
> CONFIG_IP_VS_LC=m
> CONFIG_IP_VS_WLC=m
> CONFIG_IP_VS_FO=m
> CONFIG_IP_VS_OVF=m
> CONFIG_IP_VS_LBLC=m
> CONFIG_IP_VS_LBLCR=m
> CONFIG_IP_VS_DH=m
> CONFIG_IP_VS_SH=m
> # CONFIG_IP_VS_MH is not set
> CONFIG_IP_VS_SED=m
> CONFIG_IP_VS_NQ=m
> # CONFIG_IP_VS_TWOS is not set
> 
> #
> # IPVS SH scheduler
> #
> CONFIG_IP_VS_SH_TAB_BITS=8
> 
> #
> # IPVS MH scheduler
> #
> CONFIG_IP_VS_MH_TAB_INDEX=12
> 
> #
> # IPVS application helper
> #
> CONFIG_IP_VS_FTP=m
> CONFIG_IP_VS_NFCT=y
> CONFIG_IP_VS_PE_SIP=m
> 
> #
> # IP: Netfilter Configuration
> #
> CONFIG_NF_DEFRAG_IPV4=m
> CONFIG_NF_SOCKET_IPV4=m
> CONFIG_NF_TPROXY_IPV4=m
> CONFIG_NF_TABLES_IPV4=y
> CONFIG_NFT_REJECT_IPV4=m
> CONFIG_NFT_DUP_IPV4=m
> CONFIG_NFT_FIB_IPV4=m
> CONFIG_NF_TABLES_ARP=y
> CONFIG_NF_DUP_IPV4=m
> CONFIG_NF_LOG_ARP=m
> CONFIG_NF_LOG_IPV4=m
> CONFIG_NF_REJECT_IPV4=m
> CONFIG_NF_NAT_SNMP_BASIC=m
> CONFIG_NF_NAT_PPTP=m
> CONFIG_NF_NAT_H323=m
> CONFIG_IP_NF_IPTABLES=m
> CONFIG_IP_NF_MATCH_AH=m
> CONFIG_IP_NF_MATCH_ECN=m
> CONFIG_IP_NF_MATCH_RPFILTER=m
> CONFIG_IP_NF_MATCH_TTL=m
> CONFIG_IP_NF_FILTER=m
> CONFIG_IP_NF_TARGET_REJECT=m
> CONFIG_IP_NF_TARGET_SYNPROXY=m
> CONFIG_IP_NF_NAT=m
> CONFIG_IP_NF_TARGET_MASQUERADE=m
> CONFIG_IP_NF_TARGET_NETMAP=m
> CONFIG_IP_NF_TARGET_REDIRECT=m
> CONFIG_IP_NF_MANGLE=m
> # CONFIG_IP_NF_TARGET_CLUSTERIP is not set
> CONFIG_IP_NF_TARGET_ECN=m
> CONFIG_IP_NF_TARGET_TTL=m
> CONFIG_IP_NF_RAW=m
> CONFIG_IP_NF_SECURITY=m
> CONFIG_IP_NF_ARPTABLES=m
> CONFIG_IP_NF_ARPFILTER=m
> CONFIG_IP_NF_ARP_MANGLE=m
> # end of IP: Netfilter Configuration
> 
> #
> # IPv6: Netfilter Configuration
> #
> CONFIG_NF_SOCKET_IPV6=m
> CONFIG_NF_TPROXY_IPV6=m
> CONFIG_NF_TABLES_IPV6=y
> CONFIG_NFT_REJECT_IPV6=m
> CONFIG_NFT_DUP_IPV6=m
> CONFIG_NFT_FIB_IPV6=m
> CONFIG_NF_DUP_IPV6=m
> CONFIG_NF_REJECT_IPV6=m
> CONFIG_NF_LOG_IPV6=m
> CONFIG_IP6_NF_IPTABLES=m
> CONFIG_IP6_NF_MATCH_AH=m
> CONFIG_IP6_NF_MATCH_EUI64=m
> CONFIG_IP6_NF_MATCH_FRAG=m
> CONFIG_IP6_NF_MATCH_OPTS=m
> CONFIG_IP6_NF_MATCH_HL=m
> CONFIG_IP6_NF_MATCH_IPV6HEADER=m
> CONFIG_IP6_NF_MATCH_MH=m
> CONFIG_IP6_NF_MATCH_RPFILTER=m
> CONFIG_IP6_NF_MATCH_RT=m
> # CONFIG_IP6_NF_MATCH_SRH is not set
> # CONFIG_IP6_NF_TARGET_HL is not set
> CONFIG_IP6_NF_FILTER=m
> CONFIG_IP6_NF_TARGET_REJECT=m
> CONFIG_IP6_NF_TARGET_SYNPROXY=m
> CONFIG_IP6_NF_MANGLE=m
> CONFIG_IP6_NF_RAW=m
> CONFIG_IP6_NF_SECURITY=m
> CONFIG_IP6_NF_NAT=m
> CONFIG_IP6_NF_TARGET_MASQUERADE=m
> CONFIG_IP6_NF_TARGET_NPT=m
> # end of IPv6: Netfilter Configuration
> 
> CONFIG_NF_DEFRAG_IPV6=m
> CONFIG_NF_TABLES_BRIDGE=m
> # CONFIG_NFT_BRIDGE_META is not set
> CONFIG_NFT_BRIDGE_REJECT=m
> # CONFIG_NF_CONNTRACK_BRIDGE is not set
> CONFIG_BRIDGE_NF_EBTABLES=m
> CONFIG_BRIDGE_EBT_BROUTE=m
> CONFIG_BRIDGE_EBT_T_FILTER=m
> CONFIG_BRIDGE_EBT_T_NAT=m
> CONFIG_BRIDGE_EBT_802_3=m
> CONFIG_BRIDGE_EBT_AMONG=m
> CONFIG_BRIDGE_EBT_ARP=m
> CONFIG_BRIDGE_EBT_IP=m
> CONFIG_BRIDGE_EBT_IP6=m
> CONFIG_BRIDGE_EBT_LIMIT=m
> CONFIG_BRIDGE_EBT_MARK=m
> CONFIG_BRIDGE_EBT_PKTTYPE=m
> CONFIG_BRIDGE_EBT_STP=m
> CONFIG_BRIDGE_EBT_VLAN=m
> CONFIG_BRIDGE_EBT_ARPREPLY=m
> CONFIG_BRIDGE_EBT_DNAT=m
> CONFIG_BRIDGE_EBT_MARK_T=m
> CONFIG_BRIDGE_EBT_REDIRECT=m
> CONFIG_BRIDGE_EBT_SNAT=m
> CONFIG_BRIDGE_EBT_LOG=m
> CONFIG_BRIDGE_EBT_NFLOG=m
> # CONFIG_BPFILTER is not set
> CONFIG_IP_DCCP=y
> CONFIG_INET_DCCP_DIAG=m
> 
> #
> # DCCP CCIDs Configuration
> #
> # CONFIG_IP_DCCP_CCID2_DEBUG is not set
> CONFIG_IP_DCCP_CCID3=y
> # CONFIG_IP_DCCP_CCID3_DEBUG is not set
> CONFIG_IP_DCCP_TFRC_LIB=y
> # end of DCCP CCIDs Configuration
> 
> #
> # DCCP Kernel Hacking
> #
> # CONFIG_IP_DCCP_DEBUG is not set
> # end of DCCP Kernel Hacking
> 
> CONFIG_IP_SCTP=m
> # CONFIG_SCTP_DBG_OBJCNT is not set
> # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
> CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
> # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
> CONFIG_SCTP_COOKIE_HMAC_MD5=y
> CONFIG_SCTP_COOKIE_HMAC_SHA1=y
> CONFIG_INET_SCTP_DIAG=m
> # CONFIG_RDS is not set
> CONFIG_TIPC=m
> CONFIG_TIPC_MEDIA_UDP=y
> CONFIG_TIPC_CRYPTO=y
> CONFIG_TIPC_DIAG=m
> CONFIG_ATM=m
> CONFIG_ATM_CLIP=m
> # CONFIG_ATM_CLIP_NO_ICMP is not set
> CONFIG_ATM_LANE=m
> # CONFIG_ATM_MPOA is not set
> CONFIG_ATM_BR2684=m
> # CONFIG_ATM_BR2684_IPFILTER is not set
> CONFIG_L2TP=m
> CONFIG_L2TP_DEBUGFS=m
> CONFIG_L2TP_V3=y
> CONFIG_L2TP_IP=m
> CONFIG_L2TP_ETH=m
> CONFIG_STP=m
> CONFIG_GARP=m
> CONFIG_MRP=m
> CONFIG_BRIDGE=m
> CONFIG_BRIDGE_IGMP_SNOOPING=y
> CONFIG_BRIDGE_VLAN_FILTERING=y
> # CONFIG_BRIDGE_MRP is not set
> # CONFIG_BRIDGE_CFM is not set
> # CONFIG_NET_DSA is not set
> CONFIG_VLAN_8021Q=m
> CONFIG_VLAN_8021Q_GVRP=y
> CONFIG_VLAN_8021Q_MVRP=y
> CONFIG_LLC=m
> # CONFIG_LLC2 is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_PHONET is not set
> CONFIG_6LOWPAN=m
> # CONFIG_6LOWPAN_DEBUGFS is not set
> # CONFIG_6LOWPAN_NHC is not set
> # CONFIG_IEEE802154 is not set
> CONFIG_NET_SCHED=y
> 
> #
> # Queueing/Scheduling
> #
> CONFIG_NET_SCH_CBQ=m
> CONFIG_NET_SCH_HTB=m
> CONFIG_NET_SCH_HFSC=m
> CONFIG_NET_SCH_ATM=m
> CONFIG_NET_SCH_PRIO=m
> CONFIG_NET_SCH_MULTIQ=m
> CONFIG_NET_SCH_RED=m
> CONFIG_NET_SCH_SFB=m
> CONFIG_NET_SCH_SFQ=m
> CONFIG_NET_SCH_TEQL=m
> CONFIG_NET_SCH_TBF=m
> # CONFIG_NET_SCH_CBS is not set
> # CONFIG_NET_SCH_ETF is not set
> # CONFIG_NET_SCH_TAPRIO is not set
> CONFIG_NET_SCH_GRED=m
> CONFIG_NET_SCH_DSMARK=m
> CONFIG_NET_SCH_NETEM=m
> CONFIG_NET_SCH_DRR=m
> CONFIG_NET_SCH_MQPRIO=m
> # CONFIG_NET_SCH_SKBPRIO is not set
> CONFIG_NET_SCH_CHOKE=m
> CONFIG_NET_SCH_QFQ=m
> CONFIG_NET_SCH_CODEL=m
> CONFIG_NET_SCH_FQ_CODEL=y
> # CONFIG_NET_SCH_CAKE is not set
> CONFIG_NET_SCH_FQ=m
> CONFIG_NET_SCH_HHF=m
> CONFIG_NET_SCH_PIE=m
> # CONFIG_NET_SCH_FQ_PIE is not set
> CONFIG_NET_SCH_INGRESS=m
> CONFIG_NET_SCH_PLUG=m
> # CONFIG_NET_SCH_ETS is not set
> CONFIG_NET_SCH_DEFAULT=y
> # CONFIG_DEFAULT_FQ is not set
> # CONFIG_DEFAULT_CODEL is not set
> CONFIG_DEFAULT_FQ_CODEL=y
> # CONFIG_DEFAULT_SFQ is not set
> # CONFIG_DEFAULT_PFIFO_FAST is not set
> CONFIG_DEFAULT_NET_SCH="fq_codel"
> 
> #
> # Classification
> #
> CONFIG_NET_CLS=y
> CONFIG_NET_CLS_BASIC=m
> CONFIG_NET_CLS_TCINDEX=m
> CONFIG_NET_CLS_ROUTE4=m
> CONFIG_NET_CLS_FW=m
> CONFIG_NET_CLS_U32=m
> CONFIG_CLS_U32_PERF=y
> CONFIG_CLS_U32_MARK=y
> CONFIG_NET_CLS_RSVP=m
> CONFIG_NET_CLS_RSVP6=m
> CONFIG_NET_CLS_FLOW=m
> CONFIG_NET_CLS_CGROUP=y
> CONFIG_NET_CLS_BPF=m
> CONFIG_NET_CLS_FLOWER=m
> CONFIG_NET_CLS_MATCHALL=m
> CONFIG_NET_EMATCH=y
> CONFIG_NET_EMATCH_STACK=32
> CONFIG_NET_EMATCH_CMP=m
> CONFIG_NET_EMATCH_NBYTE=m
> CONFIG_NET_EMATCH_U32=m
> CONFIG_NET_EMATCH_META=m
> CONFIG_NET_EMATCH_TEXT=m
> # CONFIG_NET_EMATCH_CANID is not set
> CONFIG_NET_EMATCH_IPSET=m
> # CONFIG_NET_EMATCH_IPT is not set
> CONFIG_NET_CLS_ACT=y
> CONFIG_NET_ACT_POLICE=m
> CONFIG_NET_ACT_GACT=m
> CONFIG_GACT_PROB=y
> CONFIG_NET_ACT_MIRRED=m
> CONFIG_NET_ACT_SAMPLE=m
> # CONFIG_NET_ACT_IPT is not set
> CONFIG_NET_ACT_NAT=m
> CONFIG_NET_ACT_PEDIT=m
> CONFIG_NET_ACT_SIMP=m
> CONFIG_NET_ACT_SKBEDIT=m
> CONFIG_NET_ACT_CSUM=m
> # CONFIG_NET_ACT_MPLS is not set
> CONFIG_NET_ACT_VLAN=m
> CONFIG_NET_ACT_BPF=m
> # CONFIG_NET_ACT_CONNMARK is not set
> # CONFIG_NET_ACT_CTINFO is not set
> CONFIG_NET_ACT_SKBMOD=m
> # CONFIG_NET_ACT_IFE is not set
> CONFIG_NET_ACT_TUNNEL_KEY=m
> # CONFIG_NET_ACT_GATE is not set
> # CONFIG_NET_TC_SKB_EXT is not set
> CONFIG_NET_SCH_FIFO=y
> CONFIG_DCB=y
> CONFIG_DNS_RESOLVER=m
> # CONFIG_BATMAN_ADV is not set
> CONFIG_OPENVSWITCH=m
> CONFIG_OPENVSWITCH_GRE=m
> CONFIG_VSOCKETS=m
> CONFIG_VSOCKETS_DIAG=m
> CONFIG_VSOCKETS_LOOPBACK=m
> CONFIG_VMWARE_VMCI_VSOCKETS=m
> CONFIG_VIRTIO_VSOCKETS=m
> CONFIG_VIRTIO_VSOCKETS_COMMON=m
> CONFIG_NETLINK_DIAG=m
> CONFIG_MPLS=y
> CONFIG_NET_MPLS_GSO=y
> CONFIG_MPLS_ROUTING=m
> CONFIG_MPLS_IPTUNNEL=m
> CONFIG_NET_NSH=y
> # CONFIG_HSR is not set
> CONFIG_NET_SWITCHDEV=y
> CONFIG_NET_L3_MASTER_DEV=y
> # CONFIG_QRTR is not set
> # CONFIG_NET_NCSI is not set
> CONFIG_PCPU_DEV_REFCNT=y
> CONFIG_RPS=y
> CONFIG_RFS_ACCEL=y
> CONFIG_SOCK_RX_QUEUE_MAPPING=y
> CONFIG_XPS=y
> CONFIG_CGROUP_NET_PRIO=y
> CONFIG_CGROUP_NET_CLASSID=y
> CONFIG_NET_RX_BUSY_POLL=y
> CONFIG_BQL=y
> CONFIG_NET_FLOW_LIMIT=y
> 
> #
> # Network testing
> #
> CONFIG_NET_PKTGEN=m
> CONFIG_NET_DROP_MONITOR=y
> # end of Network testing
> # end of Networking options
> 
> # CONFIG_HAMRADIO is not set
> CONFIG_CAN=m
> CONFIG_CAN_RAW=m
> CONFIG_CAN_BCM=m
> CONFIG_CAN_GW=m
> # CONFIG_CAN_J1939 is not set
> # CONFIG_CAN_ISOTP is not set
> # CONFIG_BT is not set
> # CONFIG_AF_RXRPC is not set
> # CONFIG_AF_KCM is not set
> CONFIG_STREAM_PARSER=y
> # CONFIG_MCTP is not set
> CONFIG_FIB_RULES=y
> CONFIG_WIRELESS=y
> CONFIG_CFG80211=m
> # CONFIG_NL80211_TESTMODE is not set
> # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
> CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
> CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
> CONFIG_CFG80211_DEFAULT_PS=y
> # CONFIG_CFG80211_DEBUGFS is not set
> CONFIG_CFG80211_CRDA_SUPPORT=y
> # CONFIG_CFG80211_WEXT is not set
> CONFIG_MAC80211=m
> CONFIG_MAC80211_HAS_RC=y
> CONFIG_MAC80211_RC_MINSTREL=y
> CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
> CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
> # CONFIG_MAC80211_MESH is not set
> CONFIG_MAC80211_LEDS=y
> CONFIG_MAC80211_DEBUGFS=y
> # CONFIG_MAC80211_MESSAGE_TRACING is not set
> # CONFIG_MAC80211_DEBUG_MENU is not set
> CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
> CONFIG_RFKILL=m
> CONFIG_RFKILL_LEDS=y
> CONFIG_RFKILL_INPUT=y
> # CONFIG_RFKILL_GPIO is not set
> CONFIG_NET_9P=y
> CONFIG_NET_9P_FD=y
> CONFIG_NET_9P_VIRTIO=y
> # CONFIG_NET_9P_DEBUG is not set
> # CONFIG_CAIF is not set
> CONFIG_CEPH_LIB=m
> # CONFIG_CEPH_LIB_PRETTYDEBUG is not set
> CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
> # CONFIG_NFC is not set
> CONFIG_PSAMPLE=m
> # CONFIG_NET_IFE is not set
> CONFIG_LWTUNNEL=y
> CONFIG_LWTUNNEL_BPF=y
> CONFIG_DST_CACHE=y
> CONFIG_GRO_CELLS=y
> CONFIG_SOCK_VALIDATE_XMIT=y
> CONFIG_NET_SELFTESTS=y
> CONFIG_NET_SOCK_MSG=y
> CONFIG_PAGE_POOL=y
> # CONFIG_PAGE_POOL_STATS is not set
> CONFIG_FAILOVER=m
> CONFIG_ETHTOOL_NETLINK=y
> 
> #
> # Device Drivers
> #
> CONFIG_HAVE_EISA=y
> # CONFIG_EISA is not set
> CONFIG_HAVE_PCI=y
> CONFIG_PCI=y
> CONFIG_PCI_DOMAINS=y
> CONFIG_PCIEPORTBUS=y
> CONFIG_HOTPLUG_PCI_PCIE=y
> CONFIG_PCIEAER=y
> CONFIG_PCIEAER_INJECT=m
> CONFIG_PCIE_ECRC=y
> CONFIG_PCIEASPM=y
> CONFIG_PCIEASPM_DEFAULT=y
> # CONFIG_PCIEASPM_POWERSAVE is not set
> # CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
> # CONFIG_PCIEASPM_PERFORMANCE is not set
> CONFIG_PCIE_PME=y
> CONFIG_PCIE_DPC=y
> # CONFIG_PCIE_PTM is not set
> # CONFIG_PCIE_EDR is not set
> CONFIG_PCI_MSI=y
> CONFIG_PCI_MSI_IRQ_DOMAIN=y
> CONFIG_PCI_QUIRKS=y
> # CONFIG_PCI_DEBUG is not set
> # CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
> CONFIG_PCI_STUB=y
> CONFIG_PCI_PF_STUB=m
> CONFIG_PCI_ATS=y
> CONFIG_PCI_LOCKLESS_CONFIG=y
> CONFIG_PCI_IOV=y
> CONFIG_PCI_PRI=y
> CONFIG_PCI_PASID=y
> # CONFIG_PCI_P2PDMA is not set
> CONFIG_PCI_LABEL=y
> CONFIG_VGA_ARB=y
> CONFIG_VGA_ARB_MAX_GPUS=64
> CONFIG_HOTPLUG_PCI=y
> CONFIG_HOTPLUG_PCI_ACPI=y
> CONFIG_HOTPLUG_PCI_ACPI_IBM=m
> # CONFIG_HOTPLUG_PCI_CPCI is not set
> CONFIG_HOTPLUG_PCI_SHPC=y
> 
> #
> # PCI controller drivers
> #
> CONFIG_VMD=y
> 
> #
> # DesignWare PCI Core Support
> #
> # CONFIG_PCIE_DW_PLAT_HOST is not set
> # CONFIG_PCI_MESON is not set
> # end of DesignWare PCI Core Support
> 
> #
> # Mobiveil PCIe Core Support
> #
> # end of Mobiveil PCIe Core Support
> 
> #
> # Cadence PCIe controllers support
> #
> # end of Cadence PCIe controllers support
> # end of PCI controller drivers
> 
> #
> # PCI Endpoint
> #
> # CONFIG_PCI_ENDPOINT is not set
> # end of PCI Endpoint
> 
> #
> # PCI switch controller drivers
> #
> # CONFIG_PCI_SW_SWITCHTEC is not set
> # end of PCI switch controller drivers
> 
> # CONFIG_CXL_BUS is not set
> # CONFIG_PCCARD is not set
> # CONFIG_RAPIDIO is not set
> 
> #
> # Generic Driver Options
> #
> CONFIG_AUXILIARY_BUS=y
> # CONFIG_UEVENT_HELPER is not set
> CONFIG_DEVTMPFS=y
> CONFIG_DEVTMPFS_MOUNT=y
> # CONFIG_DEVTMPFS_SAFE is not set
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> 
> #
> # Firmware loader
> #
> CONFIG_FW_LOADER=y
> CONFIG_FW_LOADER_PAGED_BUF=y
> CONFIG_FW_LOADER_SYSFS=y
> CONFIG_EXTRA_FIRMWARE=""
> CONFIG_FW_LOADER_USER_HELPER=y
> # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
> # CONFIG_FW_LOADER_COMPRESS is not set
> CONFIG_FW_CACHE=y
> # CONFIG_FW_UPLOAD is not set
> # end of Firmware loader
> 
> CONFIG_ALLOW_DEV_COREDUMP=y
> # CONFIG_DEBUG_DRIVER is not set
> # CONFIG_DEBUG_DEVRES is not set
> # CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
> # CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
> CONFIG_GENERIC_CPU_AUTOPROBE=y
> CONFIG_GENERIC_CPU_VULNERABILITIES=y
> CONFIG_REGMAP=y
> CONFIG_REGMAP_I2C=m
> CONFIG_REGMAP_SPI=m
> CONFIG_DMA_SHARED_BUFFER=y
> # CONFIG_DMA_FENCE_TRACE is not set
> # end of Generic Driver Options
> 
> #
> # Bus devices
> #
> # CONFIG_MHI_BUS is not set
> # CONFIG_MHI_BUS_EP is not set
> # end of Bus devices
> 
> CONFIG_CONNECTOR=y
> CONFIG_PROC_EVENTS=y
> 
> #
> # Firmware Drivers
> #
> 
> #
> # ARM System Control and Management Interface Protocol
> #
> # end of ARM System Control and Management Interface Protocol
> 
> CONFIG_EDD=m
> # CONFIG_EDD_OFF is not set
> CONFIG_FIRMWARE_MEMMAP=y
> CONFIG_DMIID=y
> CONFIG_DMI_SYSFS=y
> CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
> # CONFIG_ISCSI_IBFT is not set
> CONFIG_FW_CFG_SYSFS=y
> # CONFIG_FW_CFG_SYSFS_CMDLINE is not set
> CONFIG_SYSFB=y
> # CONFIG_SYSFB_SIMPLEFB is not set
> # CONFIG_GOOGLE_FIRMWARE is not set
> 
> #
> # EFI (Extensible Firmware Interface) Support
> #
> CONFIG_EFI_ESRT=y
> CONFIG_EFI_VARS_PSTORE=y
> CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
> CONFIG_EFI_RUNTIME_MAP=y
> # CONFIG_EFI_FAKE_MEMMAP is not set
> CONFIG_EFI_DXE_MEM_ATTRIBUTES=y
> CONFIG_EFI_RUNTIME_WRAPPERS=y
> CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
> # CONFIG_EFI_BOOTLOADER_CONTROL is not set
> # CONFIG_EFI_CAPSULE_LOADER is not set
> # CONFIG_EFI_TEST is not set
> # CONFIG_APPLE_PROPERTIES is not set
> # CONFIG_RESET_ATTACK_MITIGATION is not set
> # CONFIG_EFI_RCI2_TABLE is not set
> # CONFIG_EFI_DISABLE_PCI_DMA is not set
> CONFIG_EFI_EARLYCON=y
> CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
> # CONFIG_EFI_DISABLE_RUNTIME is not set
> # CONFIG_EFI_COCO_SECRET is not set
> # end of EFI (Extensible Firmware Interface) Support
> 
> CONFIG_UEFI_CPER=y
> CONFIG_UEFI_CPER_X86=y
> 
> #
> # Tegra firmware driver
> #
> # end of Tegra firmware driver
> # end of Firmware Drivers
> 
> # CONFIG_GNSS is not set
> # CONFIG_MTD is not set
> # CONFIG_OF is not set
> CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
> CONFIG_PARPORT=m
> CONFIG_PARPORT_PC=m
> CONFIG_PARPORT_SERIAL=m
> # CONFIG_PARPORT_PC_FIFO is not set
> # CONFIG_PARPORT_PC_SUPERIO is not set
> # CONFIG_PARPORT_AX88796 is not set
> CONFIG_PARPORT_1284=y
> CONFIG_PNP=y
> # CONFIG_PNP_DEBUG_MESSAGES is not set
> 
> #
> # Protocols
> #
> CONFIG_PNPACPI=y
> CONFIG_BLK_DEV=y
> CONFIG_BLK_DEV_NULL_BLK=m
> # CONFIG_BLK_DEV_FD is not set
> CONFIG_CDROM=m
> # CONFIG_PARIDE is not set
> # CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
> # CONFIG_ZRAM is not set
> CONFIG_BLK_DEV_LOOP=m
> CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
> # CONFIG_BLK_DEV_DRBD is not set
> CONFIG_BLK_DEV_NBD=m
> CONFIG_BLK_DEV_RAM=m
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=16384
> CONFIG_CDROM_PKTCDVD=m
> CONFIG_CDROM_PKTCDVD_BUFFERS=8
> # CONFIG_CDROM_PKTCDVD_WCACHE is not set
> # CONFIG_ATA_OVER_ETH is not set
> CONFIG_VIRTIO_BLK=m
> CONFIG_BLK_DEV_RBD=m
> # CONFIG_BLK_DEV_UBLK is not set
> 
> #
> # NVME Support
> #
> CONFIG_NVME_CORE=m
> CONFIG_BLK_DEV_NVME=m
> CONFIG_NVME_MULTIPATH=y
> # CONFIG_NVME_VERBOSE_ERRORS is not set
> # CONFIG_NVME_HWMON is not set
> CONFIG_NVME_FABRICS=m
> # CONFIG_NVME_FC is not set
> # CONFIG_NVME_TCP is not set
> # CONFIG_NVME_AUTH is not set
> CONFIG_NVME_TARGET=m
> # CONFIG_NVME_TARGET_PASSTHRU is not set
> CONFIG_NVME_TARGET_LOOP=m
> CONFIG_NVME_TARGET_FC=m
> # CONFIG_NVME_TARGET_TCP is not set
> # CONFIG_NVME_TARGET_AUTH is not set
> # end of NVME Support
> 
> #
> # Misc devices
> #
> CONFIG_SENSORS_LIS3LV02D=m
> # CONFIG_AD525X_DPOT is not set
> # CONFIG_DUMMY_IRQ is not set
> # CONFIG_IBM_ASM is not set
> # CONFIG_PHANTOM is not set
> CONFIG_TIFM_CORE=m
> CONFIG_TIFM_7XX1=m
> # CONFIG_ICS932S401 is not set
> CONFIG_ENCLOSURE_SERVICES=m
> CONFIG_SGI_XP=m
> CONFIG_HP_ILO=m
> CONFIG_SGI_GRU=m
> # CONFIG_SGI_GRU_DEBUG is not set
> CONFIG_APDS9802ALS=m
> CONFIG_ISL29003=m
> CONFIG_ISL29020=m
> CONFIG_SENSORS_TSL2550=m
> CONFIG_SENSORS_BH1770=m
> CONFIG_SENSORS_APDS990X=m
> # CONFIG_HMC6352 is not set
> # CONFIG_DS1682 is not set
> CONFIG_VMWARE_BALLOON=m
> # CONFIG_LATTICE_ECP3_CONFIG is not set
> # CONFIG_SRAM is not set
> # CONFIG_DW_XDATA_PCIE is not set
> # CONFIG_PCI_ENDPOINT_TEST is not set
> # CONFIG_XILINX_SDFEC is not set
> CONFIG_MISC_RTSX=m
> # CONFIG_C2PORT is not set
> 
> #
> # EEPROM support
> #
> # CONFIG_EEPROM_AT24 is not set
> # CONFIG_EEPROM_AT25 is not set
> CONFIG_EEPROM_LEGACY=m
> CONFIG_EEPROM_MAX6875=m
> CONFIG_EEPROM_93CX6=m
> # CONFIG_EEPROM_93XX46 is not set
> # CONFIG_EEPROM_IDT_89HPESX is not set
> # CONFIG_EEPROM_EE1004 is not set
> # end of EEPROM support
> 
> CONFIG_CB710_CORE=m
> # CONFIG_CB710_DEBUG is not set
> CONFIG_CB710_DEBUG_ASSUMPTIONS=y
> 
> #
> # Texas Instruments shared transport line discipline
> #
> # CONFIG_TI_ST is not set
> # end of Texas Instruments shared transport line discipline
> 
> CONFIG_SENSORS_LIS3_I2C=m
> CONFIG_ALTERA_STAPL=m
> CONFIG_INTEL_MEI=m
> CONFIG_INTEL_MEI_ME=m
> # CONFIG_INTEL_MEI_TXE is not set
> # CONFIG_INTEL_MEI_GSC is not set
> # CONFIG_INTEL_MEI_HDCP is not set
> # CONFIG_INTEL_MEI_PXP is not set
> CONFIG_VMWARE_VMCI=m
> # CONFIG_GENWQE is not set
> # CONFIG_ECHO is not set
> # CONFIG_BCM_VK is not set
> # CONFIG_MISC_ALCOR_PCI is not set
> CONFIG_MISC_RTSX_PCI=m
> # CONFIG_MISC_RTSX_USB is not set
> # CONFIG_HABANA_AI is not set
> # CONFIG_UACCE is not set
> CONFIG_PVPANIC=y
> # CONFIG_PVPANIC_MMIO is not set
> # CONFIG_PVPANIC_PCI is not set
> # CONFIG_GP_PCI1XXXX is not set
> # end of Misc devices
> 
> #
> # SCSI device support
> #
> CONFIG_SCSI_MOD=y
> CONFIG_RAID_ATTRS=m
> CONFIG_SCSI_COMMON=y
> CONFIG_SCSI=y
> CONFIG_SCSI_DMA=y
> CONFIG_SCSI_NETLINK=y
> CONFIG_SCSI_PROC_FS=y
> 
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=m
> CONFIG_CHR_DEV_ST=m
> CONFIG_BLK_DEV_SR=m
> CONFIG_CHR_DEV_SG=m
> CONFIG_BLK_DEV_BSG=y
> CONFIG_CHR_DEV_SCH=m
> CONFIG_SCSI_ENCLOSURE=m
> CONFIG_SCSI_CONSTANTS=y
> CONFIG_SCSI_LOGGING=y
> CONFIG_SCSI_SCAN_ASYNC=y
> 
> #
> # SCSI Transports
> #
> CONFIG_SCSI_SPI_ATTRS=m
> CONFIG_SCSI_FC_ATTRS=m
> CONFIG_SCSI_ISCSI_ATTRS=m
> CONFIG_SCSI_SAS_ATTRS=m
> CONFIG_SCSI_SAS_LIBSAS=m
> CONFIG_SCSI_SAS_ATA=y
> CONFIG_SCSI_SAS_HOST_SMP=y
> CONFIG_SCSI_SRP_ATTRS=m
> # end of SCSI Transports
> 
> CONFIG_SCSI_LOWLEVEL=y
> # CONFIG_ISCSI_TCP is not set
> # CONFIG_ISCSI_BOOT_SYSFS is not set
> # CONFIG_SCSI_CXGB3_ISCSI is not set
> # CONFIG_SCSI_CXGB4_ISCSI is not set
> # CONFIG_SCSI_BNX2_ISCSI is not set
> # CONFIG_BE2ISCSI is not set
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_HPSA is not set
> # CONFIG_SCSI_3W_9XXX is not set
> # CONFIG_SCSI_3W_SAS is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AACRAID is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC79XX is not set
> # CONFIG_SCSI_AIC94XX is not set
> # CONFIG_SCSI_MVSAS is not set
> # CONFIG_SCSI_MVUMI is not set
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_SCSI_ARCMSR is not set
> # CONFIG_SCSI_ESAS2R is not set
> # CONFIG_MEGARAID_NEWGEN is not set
> # CONFIG_MEGARAID_LEGACY is not set
> # CONFIG_MEGARAID_SAS is not set
> CONFIG_SCSI_MPT3SAS=m
> CONFIG_SCSI_MPT2SAS_MAX_SGE=128
> CONFIG_SCSI_MPT3SAS_MAX_SGE=128
> # CONFIG_SCSI_MPT2SAS is not set
> # CONFIG_SCSI_MPI3MR is not set
> # CONFIG_SCSI_SMARTPQI is not set
> # CONFIG_SCSI_HPTIOP is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_MYRB is not set
> # CONFIG_SCSI_MYRS is not set
> # CONFIG_VMWARE_PVSCSI is not set
> # CONFIG_LIBFC is not set
> # CONFIG_SCSI_SNIC is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_FDOMAIN_PCI is not set
> CONFIG_SCSI_ISCI=m
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_PPA is not set
> # CONFIG_SCSI_IMM is not set
> # CONFIG_SCSI_STEX is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_IPR is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> # CONFIG_SCSI_QLA_FC is not set
> # CONFIG_SCSI_QLA_ISCSI is not set
> # CONFIG_SCSI_LPFC is not set
> # CONFIG_SCSI_EFCT is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_AM53C974 is not set
> # CONFIG_SCSI_WD719X is not set
> CONFIG_SCSI_DEBUG=m
> # CONFIG_SCSI_PMCRAID is not set
> # CONFIG_SCSI_PM8001 is not set
> # CONFIG_SCSI_BFA_FC is not set
> # CONFIG_SCSI_VIRTIO is not set
> # CONFIG_SCSI_CHELSIO_FCOE is not set
> CONFIG_SCSI_DH=y
> CONFIG_SCSI_DH_RDAC=y
> CONFIG_SCSI_DH_HP_SW=y
> CONFIG_SCSI_DH_EMC=y
> CONFIG_SCSI_DH_ALUA=y
> # end of SCSI device support
> 
> CONFIG_ATA=m
> CONFIG_SATA_HOST=y
> CONFIG_PATA_TIMINGS=y
> CONFIG_ATA_VERBOSE_ERROR=y
> CONFIG_ATA_FORCE=y
> CONFIG_ATA_ACPI=y
> # CONFIG_SATA_ZPODD is not set
> CONFIG_SATA_PMP=y
> 
> #
> # Controllers with non-SFF native interface
> #
> CONFIG_SATA_AHCI=m
> CONFIG_SATA_MOBILE_LPM_POLICY=0
> CONFIG_SATA_AHCI_PLATFORM=m
> # CONFIG_AHCI_DWC is not set
> # CONFIG_SATA_INIC162X is not set
> # CONFIG_SATA_ACARD_AHCI is not set
> # CONFIG_SATA_SIL24 is not set
> CONFIG_ATA_SFF=y
> 
> #
> # SFF controllers with custom DMA interface
> #
> # CONFIG_PDC_ADMA is not set
> # CONFIG_SATA_QSTOR is not set
> # CONFIG_SATA_SX4 is not set
> CONFIG_ATA_BMDMA=y
> 
> #
> # SATA SFF controllers with BMDMA
> #
> CONFIG_ATA_PIIX=m
> # CONFIG_SATA_DWC is not set
> # CONFIG_SATA_MV is not set
> # CONFIG_SATA_NV is not set
> # CONFIG_SATA_PROMISE is not set
> # CONFIG_SATA_SIL is not set
> # CONFIG_SATA_SIS is not set
> # CONFIG_SATA_SVW is not set
> # CONFIG_SATA_ULI is not set
> # CONFIG_SATA_VIA is not set
> # CONFIG_SATA_VITESSE is not set
> 
> #
> # PATA SFF controllers with BMDMA
> #
> # CONFIG_PATA_ALI is not set
> # CONFIG_PATA_AMD is not set
> # CONFIG_PATA_ARTOP is not set
> # CONFIG_PATA_ATIIXP is not set
> # CONFIG_PATA_ATP867X is not set
> # CONFIG_PATA_CMD64X is not set
> # CONFIG_PATA_CYPRESS is not set
> # CONFIG_PATA_EFAR is not set
> # CONFIG_PATA_HPT366 is not set
> # CONFIG_PATA_HPT37X is not set
> # CONFIG_PATA_HPT3X2N is not set
> # CONFIG_PATA_HPT3X3 is not set
> # CONFIG_PATA_IT8213 is not set
> # CONFIG_PATA_IT821X is not set
> # CONFIG_PATA_JMICRON is not set
> # CONFIG_PATA_MARVELL is not set
> # CONFIG_PATA_NETCELL is not set
> # CONFIG_PATA_NINJA32 is not set
> # CONFIG_PATA_NS87415 is not set
> # CONFIG_PATA_OLDPIIX is not set
> # CONFIG_PATA_OPTIDMA is not set
> # CONFIG_PATA_PDC2027X is not set
> # CONFIG_PATA_PDC_OLD is not set
> # CONFIG_PATA_RADISYS is not set
> # CONFIG_PATA_RDC is not set
> # CONFIG_PATA_SCH is not set
> # CONFIG_PATA_SERVERWORKS is not set
> # CONFIG_PATA_SIL680 is not set
> # CONFIG_PATA_SIS is not set
> # CONFIG_PATA_TOSHIBA is not set
> # CONFIG_PATA_TRIFLEX is not set
> # CONFIG_PATA_VIA is not set
> # CONFIG_PATA_WINBOND is not set
> 
> #
> # PIO-only SFF controllers
> #
> # CONFIG_PATA_CMD640_PCI is not set
> # CONFIG_PATA_MPIIX is not set
> # CONFIG_PATA_NS87410 is not set
> # CONFIG_PATA_OPTI is not set
> # CONFIG_PATA_RZ1000 is not set
> 
> #
> # Generic fallback / legacy drivers
> #
> # CONFIG_PATA_ACPI is not set
> CONFIG_ATA_GENERIC=m
> # CONFIG_PATA_LEGACY is not set
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=y
> CONFIG_MD_AUTODETECT=y
> CONFIG_MD_LINEAR=m
> CONFIG_MD_RAID0=m
> CONFIG_MD_RAID1=m
> CONFIG_MD_RAID10=m
> CONFIG_MD_RAID456=m
> # CONFIG_MD_MULTIPATH is not set
> CONFIG_MD_FAULTY=m
> CONFIG_MD_CLUSTER=m
> # CONFIG_BCACHE is not set
> CONFIG_BLK_DEV_DM_BUILTIN=y
> CONFIG_BLK_DEV_DM=m
> CONFIG_DM_DEBUG=y
> CONFIG_DM_BUFIO=m
> # CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
> CONFIG_DM_BIO_PRISON=m
> CONFIG_DM_PERSISTENT_DATA=m
> # CONFIG_DM_UNSTRIPED is not set
> CONFIG_DM_CRYPT=m
> CONFIG_DM_SNAPSHOT=m
> CONFIG_DM_THIN_PROVISIONING=m
> CONFIG_DM_CACHE=m
> CONFIG_DM_CACHE_SMQ=m
> CONFIG_DM_WRITECACHE=m
> # CONFIG_DM_EBS is not set
> CONFIG_DM_ERA=m
> # CONFIG_DM_CLONE is not set
> CONFIG_DM_MIRROR=m
> CONFIG_DM_LOG_USERSPACE=m
> CONFIG_DM_RAID=m
> CONFIG_DM_ZERO=m
> CONFIG_DM_MULTIPATH=m
> CONFIG_DM_MULTIPATH_QL=m
> CONFIG_DM_MULTIPATH_ST=m
> # CONFIG_DM_MULTIPATH_HST is not set
> # CONFIG_DM_MULTIPATH_IOA is not set
> CONFIG_DM_DELAY=m
> # CONFIG_DM_DUST is not set
> CONFIG_DM_UEVENT=y
> CONFIG_DM_FLAKEY=m
> CONFIG_DM_VERITY=m
> # CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set
> # CONFIG_DM_VERITY_FEC is not set
> CONFIG_DM_SWITCH=m
> CONFIG_DM_LOG_WRITES=m
> CONFIG_DM_INTEGRITY=m
> CONFIG_DM_AUDIT=y
> CONFIG_TARGET_CORE=m
> CONFIG_TCM_IBLOCK=m
> CONFIG_TCM_FILEIO=m
> CONFIG_TCM_PSCSI=m
> CONFIG_TCM_USER2=m
> CONFIG_LOOPBACK_TARGET=m
> CONFIG_ISCSI_TARGET=m
> # CONFIG_SBP_TARGET is not set
> # CONFIG_FUSION is not set
> 
> #
> # IEEE 1394 (FireWire) support
> #
> CONFIG_FIREWIRE=m
> CONFIG_FIREWIRE_OHCI=m
> CONFIG_FIREWIRE_SBP2=m
> CONFIG_FIREWIRE_NET=m
> # CONFIG_FIREWIRE_NOSY is not set
> # end of IEEE 1394 (FireWire) support
> 
> CONFIG_MACINTOSH_DRIVERS=y
> CONFIG_MAC_EMUMOUSEBTN=y
> CONFIG_NETDEVICES=y
> CONFIG_MII=y
> CONFIG_NET_CORE=y
> # CONFIG_BONDING is not set
> # CONFIG_DUMMY is not set
> # CONFIG_WIREGUARD is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_NET_FC is not set
> # CONFIG_IFB is not set
> # CONFIG_NET_TEAM is not set
> # CONFIG_MACVLAN is not set
> # CONFIG_IPVLAN is not set
> # CONFIG_VXLAN is not set
> # CONFIG_GENEVE is not set
> # CONFIG_BAREUDP is not set
> # CONFIG_GTP is not set
> # CONFIG_AMT is not set
> # CONFIG_MACSEC is not set
> CONFIG_NETCONSOLE=m
> CONFIG_NETCONSOLE_DYNAMIC=y
> CONFIG_NETPOLL=y
> CONFIG_NET_POLL_CONTROLLER=y
> CONFIG_TUN=m
> # CONFIG_TUN_VNET_CROSS_LE is not set
> # CONFIG_VETH is not set
> CONFIG_VIRTIO_NET=m
> # CONFIG_NLMON is not set
> # CONFIG_NET_VRF is not set
> # CONFIG_VSOCKMON is not set
> # CONFIG_ARCNET is not set
> CONFIG_ATM_DRIVERS=y
> # CONFIG_ATM_DUMMY is not set
> # CONFIG_ATM_TCP is not set
> # CONFIG_ATM_LANAI is not set
> # CONFIG_ATM_ENI is not set
> # CONFIG_ATM_NICSTAR is not set
> # CONFIG_ATM_IDT77252 is not set
> # CONFIG_ATM_IA is not set
> # CONFIG_ATM_FORE200E is not set
> # CONFIG_ATM_HE is not set
> # CONFIG_ATM_SOLOS is not set
> CONFIG_ETHERNET=y
> CONFIG_MDIO=y
> # CONFIG_NET_VENDOR_3COM is not set
> CONFIG_NET_VENDOR_ADAPTEC=y
> # CONFIG_ADAPTEC_STARFIRE is not set
> CONFIG_NET_VENDOR_AGERE=y
> # CONFIG_ET131X is not set
> CONFIG_NET_VENDOR_ALACRITECH=y
> # CONFIG_SLICOSS is not set
> CONFIG_NET_VENDOR_ALTEON=y
> # CONFIG_ACENIC is not set
> # CONFIG_ALTERA_TSE is not set
> CONFIG_NET_VENDOR_AMAZON=y
> # CONFIG_ENA_ETHERNET is not set
> # CONFIG_NET_VENDOR_AMD is not set
> CONFIG_NET_VENDOR_AQUANTIA=y
> # CONFIG_AQTION is not set
> CONFIG_NET_VENDOR_ARC=y
> CONFIG_NET_VENDOR_ASIX=y
> # CONFIG_SPI_AX88796C is not set
> CONFIG_NET_VENDOR_ATHEROS=y
> # CONFIG_ATL2 is not set
> # CONFIG_ATL1 is not set
> # CONFIG_ATL1E is not set
> # CONFIG_ATL1C is not set
> # CONFIG_ALX is not set
> # CONFIG_CX_ECAT is not set
> CONFIG_NET_VENDOR_BROADCOM=y
> # CONFIG_B44 is not set
> # CONFIG_BCMGENET is not set
> # CONFIG_BNX2 is not set
> # CONFIG_CNIC is not set
> # CONFIG_TIGON3 is not set
> # CONFIG_BNX2X is not set
> # CONFIG_SYSTEMPORT is not set
> # CONFIG_BNXT is not set
> CONFIG_NET_VENDOR_CADENCE=y
> # CONFIG_MACB is not set
> CONFIG_NET_VENDOR_CAVIUM=y
> # CONFIG_THUNDER_NIC_PF is not set
> # CONFIG_THUNDER_NIC_VF is not set
> # CONFIG_THUNDER_NIC_BGX is not set
> # CONFIG_THUNDER_NIC_RGX is not set
> CONFIG_CAVIUM_PTP=y
> # CONFIG_LIQUIDIO is not set
> # CONFIG_LIQUIDIO_VF is not set
> CONFIG_NET_VENDOR_CHELSIO=y
> # CONFIG_CHELSIO_T1 is not set
> # CONFIG_CHELSIO_T3 is not set
> # CONFIG_CHELSIO_T4 is not set
> # CONFIG_CHELSIO_T4VF is not set
> CONFIG_NET_VENDOR_CISCO=y
> # CONFIG_ENIC is not set
> CONFIG_NET_VENDOR_CORTINA=y
> CONFIG_NET_VENDOR_DAVICOM=y
> # CONFIG_DM9051 is not set
> # CONFIG_DNET is not set
> CONFIG_NET_VENDOR_DEC=y
> # CONFIG_NET_TULIP is not set
> CONFIG_NET_VENDOR_DLINK=y
> # CONFIG_DL2K is not set
> # CONFIG_SUNDANCE is not set
> CONFIG_NET_VENDOR_EMULEX=y
> # CONFIG_BE2NET is not set
> CONFIG_NET_VENDOR_ENGLEDER=y
> # CONFIG_TSNEP is not set
> CONFIG_NET_VENDOR_EZCHIP=y
> CONFIG_NET_VENDOR_FUNGIBLE=y
> # CONFIG_FUN_ETH is not set
> CONFIG_NET_VENDOR_GOOGLE=y
> # CONFIG_GVE is not set
> CONFIG_NET_VENDOR_HUAWEI=y
> # CONFIG_HINIC is not set
> CONFIG_NET_VENDOR_I825XX=y
> CONFIG_NET_VENDOR_INTEL=y
> # CONFIG_E100 is not set
> CONFIG_E1000=y
> CONFIG_E1000E=y
> CONFIG_E1000E_HWTS=y
> CONFIG_IGB=y
> CONFIG_IGB_HWMON=y
> # CONFIG_IGBVF is not set
> # CONFIG_IXGB is not set
> CONFIG_IXGBE=y
> CONFIG_IXGBE_HWMON=y
> # CONFIG_IXGBE_DCB is not set
> # CONFIG_IXGBE_IPSEC is not set
> # CONFIG_IXGBEVF is not set
> CONFIG_I40E=y
> # CONFIG_I40E_DCB is not set
> # CONFIG_I40EVF is not set
> # CONFIG_ICE is not set
> # CONFIG_FM10K is not set
> CONFIG_IGC=y
> CONFIG_NET_VENDOR_WANGXUN=y
> # CONFIG_NGBE is not set
> # CONFIG_TXGBE is not set
> # CONFIG_JME is not set
> CONFIG_NET_VENDOR_ADI=y
> # CONFIG_ADIN1110 is not set
> CONFIG_NET_VENDOR_LITEX=y
> CONFIG_NET_VENDOR_MARVELL=y
> # CONFIG_MVMDIO is not set
> # CONFIG_SKGE is not set
> # CONFIG_SKY2 is not set
> # CONFIG_OCTEON_EP is not set
> # CONFIG_PRESTERA is not set
> CONFIG_NET_VENDOR_MELLANOX=y
> # CONFIG_MLX4_EN is not set
> # CONFIG_MLX5_CORE is not set
> # CONFIG_MLXSW_CORE is not set
> # CONFIG_MLXFW is not set
> CONFIG_NET_VENDOR_MICREL=y
> # CONFIG_KS8842 is not set
> # CONFIG_KS8851 is not set
> # CONFIG_KS8851_MLL is not set
> # CONFIG_KSZ884X_PCI is not set
> CONFIG_NET_VENDOR_MICROCHIP=y
> # CONFIG_ENC28J60 is not set
> # CONFIG_ENCX24J600 is not set
> # CONFIG_LAN743X is not set
> CONFIG_NET_VENDOR_MICROSEMI=y
> CONFIG_NET_VENDOR_MICROSOFT=y
> CONFIG_NET_VENDOR_MYRI=y
> # CONFIG_MYRI10GE is not set
> # CONFIG_FEALNX is not set
> CONFIG_NET_VENDOR_NI=y
> # CONFIG_NI_XGE_MANAGEMENT_ENET is not set
> CONFIG_NET_VENDOR_NATSEMI=y
> # CONFIG_NATSEMI is not set
> # CONFIG_NS83820 is not set
> CONFIG_NET_VENDOR_NETERION=y
> # CONFIG_S2IO is not set
> CONFIG_NET_VENDOR_NETRONOME=y
> # CONFIG_NFP is not set
> CONFIG_NET_VENDOR_8390=y
> # CONFIG_NE2K_PCI is not set
> CONFIG_NET_VENDOR_NVIDIA=y
> # CONFIG_FORCEDETH is not set
> CONFIG_NET_VENDOR_OKI=y
> # CONFIG_ETHOC is not set
> CONFIG_NET_VENDOR_PACKET_ENGINES=y
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> CONFIG_NET_VENDOR_PENSANDO=y
> # CONFIG_IONIC is not set
> CONFIG_NET_VENDOR_QLOGIC=y
> # CONFIG_QLA3XXX is not set
> # CONFIG_QLCNIC is not set
> # CONFIG_NETXEN_NIC is not set
> # CONFIG_QED is not set
> CONFIG_NET_VENDOR_BROCADE=y
> # CONFIG_BNA is not set
> CONFIG_NET_VENDOR_QUALCOMM=y
> # CONFIG_QCOM_EMAC is not set
> # CONFIG_RMNET is not set
> CONFIG_NET_VENDOR_RDC=y
> # CONFIG_R6040 is not set
> CONFIG_NET_VENDOR_REALTEK=y
> # CONFIG_ATP is not set
> # CONFIG_8139CP is not set
> # CONFIG_8139TOO is not set
> CONFIG_R8169=y
> CONFIG_NET_VENDOR_RENESAS=y
> CONFIG_NET_VENDOR_ROCKER=y
> # CONFIG_ROCKER is not set
> CONFIG_NET_VENDOR_SAMSUNG=y
> # CONFIG_SXGBE_ETH is not set
> CONFIG_NET_VENDOR_SEEQ=y
> CONFIG_NET_VENDOR_SILAN=y
> # CONFIG_SC92031 is not set
> CONFIG_NET_VENDOR_SIS=y
> # CONFIG_SIS900 is not set
> # CONFIG_SIS190 is not set
> CONFIG_NET_VENDOR_SOLARFLARE=y
> # CONFIG_SFC is not set
> # CONFIG_SFC_FALCON is not set
> # CONFIG_SFC_SIENA is not set
> CONFIG_NET_VENDOR_SMSC=y
> # CONFIG_EPIC100 is not set
> # CONFIG_SMSC911X is not set
> # CONFIG_SMSC9420 is not set
> CONFIG_NET_VENDOR_SOCIONEXT=y
> CONFIG_NET_VENDOR_STMICRO=y
> # CONFIG_STMMAC_ETH is not set
> CONFIG_NET_VENDOR_SUN=y
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_CASSINI is not set
> # CONFIG_NIU is not set
> CONFIG_NET_VENDOR_SYNOPSYS=y
> # CONFIG_DWC_XLGMAC is not set
> CONFIG_NET_VENDOR_TEHUTI=y
> # CONFIG_TEHUTI is not set
> CONFIG_NET_VENDOR_TI=y
> # CONFIG_TI_CPSW_PHY_SEL is not set
> # CONFIG_TLAN is not set
> CONFIG_NET_VENDOR_VERTEXCOM=y
> # CONFIG_MSE102X is not set
> CONFIG_NET_VENDOR_VIA=y
> # CONFIG_VIA_RHINE is not set
> # CONFIG_VIA_VELOCITY is not set
> CONFIG_NET_VENDOR_WIZNET=y
> # CONFIG_WIZNET_W5100 is not set
> # CONFIG_WIZNET_W5300 is not set
> CONFIG_NET_VENDOR_XILINX=y
> # CONFIG_XILINX_EMACLITE is not set
> # CONFIG_XILINX_AXI_EMAC is not set
> # CONFIG_XILINX_LL_TEMAC is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_NET_SB1000 is not set
> CONFIG_PHYLINK=y
> CONFIG_PHYLIB=y
> CONFIG_SWPHY=y
> # CONFIG_LED_TRIGGER_PHY is not set
> CONFIG_FIXED_PHY=y
> # CONFIG_SFP is not set
> 
> #
> # MII PHY device drivers
> #
> # CONFIG_AMD_PHY is not set
> # CONFIG_ADIN_PHY is not set
> # CONFIG_ADIN1100_PHY is not set
> # CONFIG_AQUANTIA_PHY is not set
> CONFIG_AX88796B_PHY=y
> # CONFIG_BROADCOM_PHY is not set
> # CONFIG_BCM54140_PHY is not set
> # CONFIG_BCM7XXX_PHY is not set
> # CONFIG_BCM84881_PHY is not set
> # CONFIG_BCM87XX_PHY is not set
> # CONFIG_CICADA_PHY is not set
> # CONFIG_CORTINA_PHY is not set
> # CONFIG_DAVICOM_PHY is not set
> # CONFIG_ICPLUS_PHY is not set
> # CONFIG_LXT_PHY is not set
> # CONFIG_INTEL_XWAY_PHY is not set
> # CONFIG_LSI_ET1011C_PHY is not set
> # CONFIG_MARVELL_PHY is not set
> # CONFIG_MARVELL_10G_PHY is not set
> # CONFIG_MARVELL_88X2222_PHY is not set
> # CONFIG_MAXLINEAR_GPHY is not set
> # CONFIG_MEDIATEK_GE_PHY is not set
> # CONFIG_MICREL_PHY is not set
> # CONFIG_MICROCHIP_PHY is not set
> # CONFIG_MICROCHIP_T1_PHY is not set
> # CONFIG_MICROSEMI_PHY is not set
> # CONFIG_MOTORCOMM_PHY is not set
> # CONFIG_NATIONAL_PHY is not set
> # CONFIG_NXP_C45_TJA11XX_PHY is not set
> # CONFIG_NXP_TJA11XX_PHY is not set
> # CONFIG_QSEMI_PHY is not set
> CONFIG_REALTEK_PHY=y
> # CONFIG_RENESAS_PHY is not set
> # CONFIG_ROCKCHIP_PHY is not set
> # CONFIG_SMSC_PHY is not set
> # CONFIG_STE10XP is not set
> # CONFIG_TERANETICS_PHY is not set
> # CONFIG_DP83822_PHY is not set
> # CONFIG_DP83TC811_PHY is not set
> # CONFIG_DP83848_PHY is not set
> # CONFIG_DP83867_PHY is not set
> # CONFIG_DP83869_PHY is not set
> # CONFIG_DP83TD510_PHY is not set
> # CONFIG_VITESSE_PHY is not set
> # CONFIG_XILINX_GMII2RGMII is not set
> # CONFIG_MICREL_KS8995MA is not set
> # CONFIG_PSE_CONTROLLER is not set
> CONFIG_CAN_DEV=m
> CONFIG_CAN_VCAN=m
> # CONFIG_CAN_VXCAN is not set
> CONFIG_CAN_NETLINK=y
> CONFIG_CAN_CALC_BITTIMING=y
> # CONFIG_CAN_CAN327 is not set
> # CONFIG_CAN_KVASER_PCIEFD is not set
> CONFIG_CAN_SLCAN=m
> CONFIG_CAN_C_CAN=m
> CONFIG_CAN_C_CAN_PLATFORM=m
> CONFIG_CAN_C_CAN_PCI=m
> CONFIG_CAN_CC770=m
> # CONFIG_CAN_CC770_ISA is not set
> CONFIG_CAN_CC770_PLATFORM=m
> # CONFIG_CAN_CTUCANFD_PCI is not set
> # CONFIG_CAN_IFI_CANFD is not set
> # CONFIG_CAN_M_CAN is not set
> # CONFIG_CAN_PEAK_PCIEFD is not set
> CONFIG_CAN_SJA1000=m
> CONFIG_CAN_EMS_PCI=m
> # CONFIG_CAN_F81601 is not set
> CONFIG_CAN_KVASER_PCI=m
> CONFIG_CAN_PEAK_PCI=m
> CONFIG_CAN_PEAK_PCIEC=y
> CONFIG_CAN_PLX_PCI=m
> # CONFIG_CAN_SJA1000_ISA is not set
> # CONFIG_CAN_SJA1000_PLATFORM is not set
> CONFIG_CAN_SOFTING=m
> 
> #
> # CAN SPI interfaces
> #
> # CONFIG_CAN_HI311X is not set
> # CONFIG_CAN_MCP251X is not set
> # CONFIG_CAN_MCP251XFD is not set
> # end of CAN SPI interfaces
> 
> #
> # CAN USB interfaces
> #
> # CONFIG_CAN_8DEV_USB is not set
> # CONFIG_CAN_EMS_USB is not set
> # CONFIG_CAN_ESD_USB is not set
> # CONFIG_CAN_ETAS_ES58X is not set
> # CONFIG_CAN_GS_USB is not set
> # CONFIG_CAN_KVASER_USB is not set
> # CONFIG_CAN_MCBA_USB is not set
> # CONFIG_CAN_PEAK_USB is not set
> # CONFIG_CAN_UCAN is not set
> # end of CAN USB interfaces
> 
> # CONFIG_CAN_DEBUG_DEVICES is not set
> CONFIG_MDIO_DEVICE=y
> CONFIG_MDIO_BUS=y
> CONFIG_FWNODE_MDIO=y
> CONFIG_ACPI_MDIO=y
> CONFIG_MDIO_DEVRES=y
> # CONFIG_MDIO_BITBANG is not set
> # CONFIG_MDIO_BCM_UNIMAC is not set
> # CONFIG_MDIO_MVUSB is not set
> # CONFIG_MDIO_THUNDER is not set
> 
> #
> # MDIO Multiplexers
> #
> 
> #
> # PCS device drivers
> #
> # end of PCS device drivers
> 
> # CONFIG_PLIP is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
> CONFIG_USB_NET_DRIVERS=y
> # CONFIG_USB_CATC is not set
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_RTL8150 is not set
> CONFIG_USB_RTL8152=y
> # CONFIG_USB_LAN78XX is not set
> CONFIG_USB_USBNET=y
> CONFIG_USB_NET_AX8817X=y
> CONFIG_USB_NET_AX88179_178A=y
> # CONFIG_USB_NET_CDCETHER is not set
> # CONFIG_USB_NET_CDC_EEM is not set
> # CONFIG_USB_NET_CDC_NCM is not set
> # CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
> # CONFIG_USB_NET_CDC_MBIM is not set
> # CONFIG_USB_NET_DM9601 is not set
> # CONFIG_USB_NET_SR9700 is not set
> # CONFIG_USB_NET_SR9800 is not set
> # CONFIG_USB_NET_SMSC75XX is not set
> # CONFIG_USB_NET_SMSC95XX is not set
> # CONFIG_USB_NET_GL620A is not set
> # CONFIG_USB_NET_NET1080 is not set
> # CONFIG_USB_NET_PLUSB is not set
> # CONFIG_USB_NET_MCS7830 is not set
> # CONFIG_USB_NET_RNDIS_HOST is not set
> # CONFIG_USB_NET_CDC_SUBSET is not set
> # CONFIG_USB_NET_ZAURUS is not set
> # CONFIG_USB_NET_CX82310_ETH is not set
> # CONFIG_USB_NET_KALMIA is not set
> # CONFIG_USB_NET_QMI_WWAN is not set
> # CONFIG_USB_HSO is not set
> # CONFIG_USB_NET_INT51X1 is not set
> # CONFIG_USB_IPHETH is not set
> # CONFIG_USB_SIERRA_NET is not set
> # CONFIG_USB_NET_CH9200 is not set
> # CONFIG_USB_NET_AQC111 is not set
> CONFIG_WLAN=y
> CONFIG_WLAN_VENDOR_ADMTEK=y
> # CONFIG_ADM8211 is not set
> CONFIG_WLAN_VENDOR_ATH=y
> # CONFIG_ATH_DEBUG is not set
> # CONFIG_ATH5K is not set
> # CONFIG_ATH5K_PCI is not set
> # CONFIG_ATH9K is not set
> # CONFIG_ATH9K_HTC is not set
> # CONFIG_CARL9170 is not set
> # CONFIG_ATH6KL is not set
> # CONFIG_AR5523 is not set
> # CONFIG_WIL6210 is not set
> # CONFIG_ATH10K is not set
> # CONFIG_WCN36XX is not set
> # CONFIG_ATH11K is not set
> CONFIG_WLAN_VENDOR_ATMEL=y
> # CONFIG_ATMEL is not set
> # CONFIG_AT76C50X_USB is not set
> CONFIG_WLAN_VENDOR_BROADCOM=y
> # CONFIG_B43 is not set
> # CONFIG_B43LEGACY is not set
> # CONFIG_BRCMSMAC is not set
> # CONFIG_BRCMFMAC is not set
> CONFIG_WLAN_VENDOR_CISCO=y
> # CONFIG_AIRO is not set
> CONFIG_WLAN_VENDOR_INTEL=y
> # CONFIG_IPW2100 is not set
> # CONFIG_IPW2200 is not set
> # CONFIG_IWL4965 is not set
> # CONFIG_IWL3945 is not set
> # CONFIG_IWLWIFI is not set
> CONFIG_WLAN_VENDOR_INTERSIL=y
> # CONFIG_HOSTAP is not set
> # CONFIG_HERMES is not set
> # CONFIG_P54_COMMON is not set
> CONFIG_WLAN_VENDOR_MARVELL=y
> # CONFIG_LIBERTAS is not set
> # CONFIG_LIBERTAS_THINFIRM is not set
> # CONFIG_MWIFIEX is not set
> # CONFIG_MWL8K is not set
> # CONFIG_WLAN_VENDOR_MEDIATEK is not set
> CONFIG_WLAN_VENDOR_MICROCHIP=y
> # CONFIG_WILC1000_SDIO is not set
> # CONFIG_WILC1000_SPI is not set
> CONFIG_WLAN_VENDOR_PURELIFI=y
> # CONFIG_PLFXLC is not set
> CONFIG_WLAN_VENDOR_RALINK=y
> # CONFIG_RT2X00 is not set
> CONFIG_WLAN_VENDOR_REALTEK=y
> # CONFIG_RTL8180 is not set
> # CONFIG_RTL8187 is not set
> CONFIG_RTL_CARDS=m
> # CONFIG_RTL8192CE is not set
> # CONFIG_RTL8192SE is not set
> # CONFIG_RTL8192DE is not set
> # CONFIG_RTL8723AE is not set
> # CONFIG_RTL8723BE is not set
> # CONFIG_RTL8188EE is not set
> # CONFIG_RTL8192EE is not set
> # CONFIG_RTL8821AE is not set
> # CONFIG_RTL8192CU is not set
> # CONFIG_RTL8XXXU is not set
> # CONFIG_RTW88 is not set
> # CONFIG_RTW89 is not set
> CONFIG_WLAN_VENDOR_RSI=y
> # CONFIG_RSI_91X is not set
> CONFIG_WLAN_VENDOR_SILABS=y
> # CONFIG_WFX is not set
> CONFIG_WLAN_VENDOR_ST=y
> # CONFIG_CW1200 is not set
> CONFIG_WLAN_VENDOR_TI=y
> # CONFIG_WL1251 is not set
> # CONFIG_WL12XX is not set
> # CONFIG_WL18XX is not set
> # CONFIG_WLCORE is not set
> CONFIG_WLAN_VENDOR_ZYDAS=y
> # CONFIG_USB_ZD1201 is not set
> # CONFIG_ZD1211RW is not set
> CONFIG_WLAN_VENDOR_QUANTENNA=y
> # CONFIG_QTNFMAC_PCIE is not set
> # CONFIG_MAC80211_HWSIM is not set
> # CONFIG_USB_NET_RNDIS_WLAN is not set
> # CONFIG_VIRT_WIFI is not set
> # CONFIG_WAN is not set
> 
> #
> # Wireless WAN
> #
> # CONFIG_WWAN is not set
> # end of Wireless WAN
> 
> # CONFIG_VMXNET3 is not set
> # CONFIG_FUJITSU_ES is not set
> # CONFIG_NETDEVSIM is not set
> CONFIG_NET_FAILOVER=m
> # CONFIG_ISDN is not set
> 
> #
> # Input device support
> #
> CONFIG_INPUT=y
> CONFIG_INPUT_LEDS=y
> CONFIG_INPUT_FF_MEMLESS=m
> CONFIG_INPUT_SPARSEKMAP=m
> # CONFIG_INPUT_MATRIXKMAP is not set
> CONFIG_INPUT_VIVALDIFMAP=y
> 
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> CONFIG_INPUT_JOYDEV=m
> CONFIG_INPUT_EVDEV=y
> # CONFIG_INPUT_EVBUG is not set
> 
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> # CONFIG_KEYBOARD_ADP5588 is not set
> # CONFIG_KEYBOARD_ADP5589 is not set
> # CONFIG_KEYBOARD_APPLESPI is not set
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_QT1050 is not set
> # CONFIG_KEYBOARD_QT1070 is not set
> # CONFIG_KEYBOARD_QT2160 is not set
> # CONFIG_KEYBOARD_DLINK_DIR685 is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_GPIO is not set
> # CONFIG_KEYBOARD_GPIO_POLLED is not set
> # CONFIG_KEYBOARD_TCA6416 is not set
> # CONFIG_KEYBOARD_TCA8418 is not set
> # CONFIG_KEYBOARD_MATRIX is not set
> # CONFIG_KEYBOARD_LM8323 is not set
> # CONFIG_KEYBOARD_LM8333 is not set
> # CONFIG_KEYBOARD_MAX7359 is not set
> # CONFIG_KEYBOARD_MCS is not set
> # CONFIG_KEYBOARD_MPR121 is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_KEYBOARD_OPENCORES is not set
> # CONFIG_KEYBOARD_SAMSUNG is not set
> # CONFIG_KEYBOARD_STOWAWAY is not set
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_CYPRESS_SF is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> CONFIG_MOUSE_PS2_ALPS=y
> CONFIG_MOUSE_PS2_BYD=y
> CONFIG_MOUSE_PS2_LOGIPS2PP=y
> CONFIG_MOUSE_PS2_SYNAPTICS=y
> CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
> CONFIG_MOUSE_PS2_CYPRESS=y
> CONFIG_MOUSE_PS2_LIFEBOOK=y
> CONFIG_MOUSE_PS2_TRACKPOINT=y
> CONFIG_MOUSE_PS2_ELANTECH=y
> CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
> CONFIG_MOUSE_PS2_SENTELIC=y
> # CONFIG_MOUSE_PS2_TOUCHKIT is not set
> CONFIG_MOUSE_PS2_FOCALTECH=y
> CONFIG_MOUSE_PS2_VMMOUSE=y
> CONFIG_MOUSE_PS2_SMBUS=y
> CONFIG_MOUSE_SERIAL=m
> # CONFIG_MOUSE_APPLETOUCH is not set
> # CONFIG_MOUSE_BCM5974 is not set
> CONFIG_MOUSE_CYAPA=m
> CONFIG_MOUSE_ELAN_I2C=m
> CONFIG_MOUSE_ELAN_I2C_I2C=y
> CONFIG_MOUSE_ELAN_I2C_SMBUS=y
> CONFIG_MOUSE_VSXXXAA=m
> # CONFIG_MOUSE_GPIO is not set
> CONFIG_MOUSE_SYNAPTICS_I2C=m
> # CONFIG_MOUSE_SYNAPTICS_USB is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TABLET is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
> CONFIG_RMI4_CORE=m
> CONFIG_RMI4_I2C=m
> CONFIG_RMI4_SPI=m
> CONFIG_RMI4_SMB=m
> CONFIG_RMI4_F03=y
> CONFIG_RMI4_F03_SERIO=m
> CONFIG_RMI4_2D_SENSOR=y
> CONFIG_RMI4_F11=y
> CONFIG_RMI4_F12=y
> CONFIG_RMI4_F30=y
> CONFIG_RMI4_F34=y
> # CONFIG_RMI4_F3A is not set
> CONFIG_RMI4_F55=y
> 
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=y
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PARKBD is not set
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=y
> CONFIG_SERIO_RAW=m
> CONFIG_SERIO_ALTERA_PS2=m
> # CONFIG_SERIO_PS2MULT is not set
> CONFIG_SERIO_ARC_PS2=m
> # CONFIG_SERIO_GPIO_PS2 is not set
> # CONFIG_USERIO is not set
> # CONFIG_GAMEPORT is not set
> # end of Hardware I/O ports
> # end of Input device support
> 
> #
> # Character devices
> #
> CONFIG_TTY=y
> CONFIG_VT=y
> CONFIG_CONSOLE_TRANSLATIONS=y
> CONFIG_VT_CONSOLE=y
> CONFIG_VT_CONSOLE_SLEEP=y
> CONFIG_HW_CONSOLE=y
> CONFIG_VT_HW_CONSOLE_BINDING=y
> CONFIG_UNIX98_PTYS=y
> # CONFIG_LEGACY_PTYS is not set
> CONFIG_LDISC_AUTOLOAD=y
> 
> #
> # Serial drivers
> #
> CONFIG_SERIAL_EARLYCON=y
> CONFIG_SERIAL_8250=y
> # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
> CONFIG_SERIAL_8250_PNP=y
> # CONFIG_SERIAL_8250_16550A_VARIANTS is not set
> # CONFIG_SERIAL_8250_FINTEK is not set
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_SERIAL_8250_DMA=y
> CONFIG_SERIAL_8250_PCI=y
> CONFIG_SERIAL_8250_EXAR=y
> CONFIG_SERIAL_8250_NR_UARTS=64
> CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> CONFIG_SERIAL_8250_EXTENDED=y
> CONFIG_SERIAL_8250_MANY_PORTS=y
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> # CONFIG_SERIAL_8250_DETECT_IRQ is not set
> CONFIG_SERIAL_8250_RSA=y
> CONFIG_SERIAL_8250_DWLIB=y
> CONFIG_SERIAL_8250_DW=y
> # CONFIG_SERIAL_8250_RT288X is not set
> CONFIG_SERIAL_8250_LPSS=y
> CONFIG_SERIAL_8250_MID=y
> CONFIG_SERIAL_8250_PERICOM=y
> 
> #
> # Non-8250 serial port support
> #
> # CONFIG_SERIAL_MAX3100 is not set
> # CONFIG_SERIAL_MAX310X is not set
> # CONFIG_SERIAL_UARTLITE is not set
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> CONFIG_SERIAL_JSM=m
> # CONFIG_SERIAL_LANTIQ is not set
> # CONFIG_SERIAL_SCCNXP is not set
> # CONFIG_SERIAL_SC16IS7XX is not set
> # CONFIG_SERIAL_ALTERA_JTAGUART is not set
> # CONFIG_SERIAL_ALTERA_UART is not set
> CONFIG_SERIAL_ARC=m
> CONFIG_SERIAL_ARC_NR_PORTS=1
> # CONFIG_SERIAL_RP2 is not set
> # CONFIG_SERIAL_FSL_LPUART is not set
> # CONFIG_SERIAL_FSL_LINFLEXUART is not set
> # CONFIG_SERIAL_SPRD is not set
> # end of Serial drivers
> 
> CONFIG_SERIAL_MCTRL_GPIO=y
> CONFIG_SERIAL_NONSTANDARD=y
> # CONFIG_MOXA_INTELLIO is not set
> # CONFIG_MOXA_SMARTIO is not set
> CONFIG_SYNCLINK_GT=m
> CONFIG_N_HDLC=m
> CONFIG_N_GSM=m
> CONFIG_NOZOMI=m
> # CONFIG_NULL_TTY is not set
> CONFIG_HVC_DRIVER=y
> # CONFIG_SERIAL_DEV_BUS is not set
> CONFIG_PRINTER=m
> # CONFIG_LP_CONSOLE is not set
> CONFIG_PPDEV=m
> CONFIG_VIRTIO_CONSOLE=m
> CONFIG_IPMI_HANDLER=m
> CONFIG_IPMI_DMI_DECODE=y
> CONFIG_IPMI_PLAT_DATA=y
> CONFIG_IPMI_PANIC_EVENT=y
> CONFIG_IPMI_PANIC_STRING=y
> CONFIG_IPMI_DEVICE_INTERFACE=m
> CONFIG_IPMI_SI=m
> CONFIG_IPMI_SSIF=m
> CONFIG_IPMI_WATCHDOG=m
> CONFIG_IPMI_POWEROFF=m
> CONFIG_HW_RANDOM=y
> CONFIG_HW_RANDOM_TIMERIOMEM=m
> CONFIG_HW_RANDOM_INTEL=m
> # CONFIG_HW_RANDOM_AMD is not set
> # CONFIG_HW_RANDOM_BA431 is not set
> CONFIG_HW_RANDOM_VIA=m
> CONFIG_HW_RANDOM_VIRTIO=y
> # CONFIG_HW_RANDOM_XIPHERA is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_MWAVE is not set
> CONFIG_DEVMEM=y
> CONFIG_NVRAM=y
> CONFIG_DEVPORT=y
> CONFIG_HPET=y
> CONFIG_HPET_MMAP=y
> # CONFIG_HPET_MMAP_DEFAULT is not set
> CONFIG_HANGCHECK_TIMER=m
> CONFIG_UV_MMTIMER=m
> CONFIG_TCG_TPM=y
> CONFIG_HW_RANDOM_TPM=y
> CONFIG_TCG_TIS_CORE=y
> CONFIG_TCG_TIS=y
> # CONFIG_TCG_TIS_SPI is not set
> # CONFIG_TCG_TIS_I2C is not set
> # CONFIG_TCG_TIS_I2C_CR50 is not set
> CONFIG_TCG_TIS_I2C_ATMEL=m
> CONFIG_TCG_TIS_I2C_INFINEON=m
> CONFIG_TCG_TIS_I2C_NUVOTON=m
> CONFIG_TCG_NSC=m
> CONFIG_TCG_ATMEL=m
> CONFIG_TCG_INFINEON=m
> CONFIG_TCG_CRB=y
> # CONFIG_TCG_VTPM_PROXY is not set
> CONFIG_TCG_TIS_ST33ZP24=m
> CONFIG_TCG_TIS_ST33ZP24_I2C=m
> # CONFIG_TCG_TIS_ST33ZP24_SPI is not set
> CONFIG_TELCLOCK=m
> # CONFIG_XILLYBUS is not set
> # CONFIG_XILLYUSB is not set
> CONFIG_RANDOM_TRUST_CPU=y
> CONFIG_RANDOM_TRUST_BOOTLOADER=y
> # end of Character devices
> 
> #
> # I2C support
> #
> CONFIG_I2C=y
> CONFIG_ACPI_I2C_OPREGION=y
> CONFIG_I2C_BOARDINFO=y
> CONFIG_I2C_COMPAT=y
> CONFIG_I2C_CHARDEV=m
> CONFIG_I2C_MUX=m
> 
> #
> # Multiplexer I2C Chip support
> #
> # CONFIG_I2C_MUX_GPIO is not set
> # CONFIG_I2C_MUX_LTC4306 is not set
> # CONFIG_I2C_MUX_PCA9541 is not set
> # CONFIG_I2C_MUX_PCA954x is not set
> # CONFIG_I2C_MUX_REG is not set
> CONFIG_I2C_MUX_MLXCPLD=m
> # end of Multiplexer I2C Chip support
> 
> CONFIG_I2C_HELPER_AUTO=y
> CONFIG_I2C_SMBUS=y
> CONFIG_I2C_ALGOBIT=y
> CONFIG_I2C_ALGOPCA=m
> 
> #
> # I2C Hardware Bus support
> #
> 
> #
> # PC SMBus host controller drivers
> #
> # CONFIG_I2C_ALI1535 is not set
> # CONFIG_I2C_ALI1563 is not set
> # CONFIG_I2C_ALI15X3 is not set
> # CONFIG_I2C_AMD756 is not set
> # CONFIG_I2C_AMD8111 is not set
> # CONFIG_I2C_AMD_MP2 is not set
> CONFIG_I2C_I801=y
> CONFIG_I2C_ISCH=m
> CONFIG_I2C_ISMT=m
> CONFIG_I2C_PIIX4=m
> CONFIG_I2C_NFORCE2=m
> CONFIG_I2C_NFORCE2_S4985=m
> # CONFIG_I2C_NVIDIA_GPU is not set
> # CONFIG_I2C_SIS5595 is not set
> # CONFIG_I2C_SIS630 is not set
> CONFIG_I2C_SIS96X=m
> CONFIG_I2C_VIA=m
> CONFIG_I2C_VIAPRO=m
> 
> #
> # ACPI drivers
> #
> CONFIG_I2C_SCMI=m
> 
> #
> # I2C system bus drivers (mostly embedded / system-on-chip)
> #
> # CONFIG_I2C_CBUS_GPIO is not set
> CONFIG_I2C_DESIGNWARE_CORE=m
> # CONFIG_I2C_DESIGNWARE_SLAVE is not set
> CONFIG_I2C_DESIGNWARE_PLATFORM=m
> # CONFIG_I2C_DESIGNWARE_AMDPSP is not set
> CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
> # CONFIG_I2C_DESIGNWARE_PCI is not set
> # CONFIG_I2C_EMEV2 is not set
> # CONFIG_I2C_GPIO is not set
> # CONFIG_I2C_OCORES is not set
> CONFIG_I2C_PCA_PLATFORM=m
> CONFIG_I2C_SIMTEC=m
> # CONFIG_I2C_XILINX is not set
> 
> #
> # External I2C/SMBus adapter drivers
> #
> # CONFIG_I2C_DIOLAN_U2C is not set
> # CONFIG_I2C_CP2615 is not set
> CONFIG_I2C_PARPORT=m
> # CONFIG_I2C_PCI1XXXX is not set
> # CONFIG_I2C_ROBOTFUZZ_OSIF is not set
> # CONFIG_I2C_TAOS_EVM is not set
> # CONFIG_I2C_TINY_USB is not set
> 
> #
> # Other I2C/SMBus bus drivers
> #
> CONFIG_I2C_MLXCPLD=m
> # CONFIG_I2C_VIRTIO is not set
> # end of I2C Hardware Bus support
> 
> CONFIG_I2C_STUB=m
> # CONFIG_I2C_SLAVE is not set
> # CONFIG_I2C_DEBUG_CORE is not set
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> # end of I2C support
> 
> # CONFIG_I3C is not set
> CONFIG_SPI=y
> # CONFIG_SPI_DEBUG is not set
> CONFIG_SPI_MASTER=y
> # CONFIG_SPI_MEM is not set
> 
> #
> # SPI Master Controller Drivers
> #
> # CONFIG_SPI_ALTERA is not set
> # CONFIG_SPI_AXI_SPI_ENGINE is not set
> # CONFIG_SPI_BITBANG is not set
> # CONFIG_SPI_BUTTERFLY is not set
> # CONFIG_SPI_CADENCE is not set
> # CONFIG_SPI_DESIGNWARE is not set
> # CONFIG_SPI_NXP_FLEXSPI is not set
> # CONFIG_SPI_GPIO is not set
> # CONFIG_SPI_LM70_LLP is not set
> # CONFIG_SPI_MICROCHIP_CORE is not set
> # CONFIG_SPI_MICROCHIP_CORE_QSPI is not set
> # CONFIG_SPI_LANTIQ_SSC is not set
> # CONFIG_SPI_OC_TINY is not set
> # CONFIG_SPI_PXA2XX is not set
> # CONFIG_SPI_ROCKCHIP is not set
> # CONFIG_SPI_SC18IS602 is not set
> # CONFIG_SPI_SIFIVE is not set
> # CONFIG_SPI_MXIC is not set
> # CONFIG_SPI_XCOMM is not set
> # CONFIG_SPI_XILINX is not set
> # CONFIG_SPI_ZYNQMP_GQSPI is not set
> # CONFIG_SPI_AMD is not set
> 
> #
> # SPI Multiplexer support
> #
> # CONFIG_SPI_MUX is not set
> 
> #
> # SPI Protocol Masters
> #
> # CONFIG_SPI_SPIDEV is not set
> # CONFIG_SPI_LOOPBACK_TEST is not set
> # CONFIG_SPI_TLE62X0 is not set
> # CONFIG_SPI_SLAVE is not set
> CONFIG_SPI_DYNAMIC=y
> # CONFIG_SPMI is not set
> # CONFIG_HSI is not set
> CONFIG_PPS=y
> # CONFIG_PPS_DEBUG is not set
> 
> #
> # PPS clients support
> #
> # CONFIG_PPS_CLIENT_KTIMER is not set
> CONFIG_PPS_CLIENT_LDISC=m
> CONFIG_PPS_CLIENT_PARPORT=m
> CONFIG_PPS_CLIENT_GPIO=m
> 
> #
> # PPS generators support
> #
> 
> #
> # PTP clock support
> #
> CONFIG_PTP_1588_CLOCK=y
> CONFIG_PTP_1588_CLOCK_OPTIONAL=y
> # CONFIG_DP83640_PHY is not set
> # CONFIG_PTP_1588_CLOCK_INES is not set
> CONFIG_PTP_1588_CLOCK_KVM=m
> # CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
> # CONFIG_PTP_1588_CLOCK_IDTCM is not set
> # CONFIG_PTP_1588_CLOCK_VMW is not set
> # end of PTP clock support
> 
> CONFIG_PINCTRL=y
> # CONFIG_DEBUG_PINCTRL is not set
> # CONFIG_PINCTRL_AMD is not set
> # CONFIG_PINCTRL_CY8C95X0 is not set
> # CONFIG_PINCTRL_MCP23S08 is not set
> # CONFIG_PINCTRL_SX150X is not set
> 
> #
> # Intel pinctrl drivers
> #
> # CONFIG_PINCTRL_BAYTRAIL is not set
> # CONFIG_PINCTRL_CHERRYVIEW is not set
> # CONFIG_PINCTRL_LYNXPOINT is not set
> # CONFIG_PINCTRL_ALDERLAKE is not set
> # CONFIG_PINCTRL_BROXTON is not set
> # CONFIG_PINCTRL_CANNONLAKE is not set
> # CONFIG_PINCTRL_CEDARFORK is not set
> # CONFIG_PINCTRL_DENVERTON is not set
> # CONFIG_PINCTRL_ELKHARTLAKE is not set
> # CONFIG_PINCTRL_EMMITSBURG is not set
> # CONFIG_PINCTRL_GEMINILAKE is not set
> # CONFIG_PINCTRL_ICELAKE is not set
> # CONFIG_PINCTRL_JASPERLAKE is not set
> # CONFIG_PINCTRL_LAKEFIELD is not set
> # CONFIG_PINCTRL_LEWISBURG is not set
> # CONFIG_PINCTRL_METEORLAKE is not set
> # CONFIG_PINCTRL_SUNRISEPOINT is not set
> # CONFIG_PINCTRL_TIGERLAKE is not set
> # end of Intel pinctrl drivers
> 
> #
> # Renesas pinctrl drivers
> #
> # end of Renesas pinctrl drivers
> 
> CONFIG_GPIOLIB=y
> CONFIG_GPIOLIB_FASTPATH_LIMIT=512
> CONFIG_GPIO_ACPI=y
> # CONFIG_DEBUG_GPIO is not set
> CONFIG_GPIO_CDEV=y
> CONFIG_GPIO_CDEV_V1=y
> 
> #
> # Memory mapped GPIO drivers
> #
> # CONFIG_GPIO_AMDPT is not set
> # CONFIG_GPIO_DWAPB is not set
> # CONFIG_GPIO_EXAR is not set
> # CONFIG_GPIO_GENERIC_PLATFORM is not set
> CONFIG_GPIO_ICH=m
> # CONFIG_GPIO_MB86S7X is not set
> # CONFIG_GPIO_VX855 is not set
> # CONFIG_GPIO_AMD_FCH is not set
> # end of Memory mapped GPIO drivers
> 
> #
> # Port-mapped I/O GPIO drivers
> #
> # CONFIG_GPIO_F7188X is not set
> # CONFIG_GPIO_IT87 is not set
> # CONFIG_GPIO_SCH is not set
> # CONFIG_GPIO_SCH311X is not set
> # CONFIG_GPIO_WINBOND is not set
> # CONFIG_GPIO_WS16C48 is not set
> # end of Port-mapped I/O GPIO drivers
> 
> #
> # I2C GPIO expanders
> #
> # CONFIG_GPIO_MAX7300 is not set
> # CONFIG_GPIO_MAX732X is not set
> # CONFIG_GPIO_PCA953X is not set
> # CONFIG_GPIO_PCA9570 is not set
> # CONFIG_GPIO_PCF857X is not set
> # CONFIG_GPIO_TPIC2810 is not set
> # end of I2C GPIO expanders
> 
> #
> # MFD GPIO expanders
> #
> # end of MFD GPIO expanders
> 
> #
> # PCI GPIO expanders
> #
> # CONFIG_GPIO_AMD8111 is not set
> # CONFIG_GPIO_BT8XX is not set
> # CONFIG_GPIO_ML_IOH is not set
> # CONFIG_GPIO_PCI_IDIO_16 is not set
> # CONFIG_GPIO_PCIE_IDIO_24 is not set
> # CONFIG_GPIO_RDC321X is not set
> # end of PCI GPIO expanders
> 
> #
> # SPI GPIO expanders
> #
> # CONFIG_GPIO_MAX3191X is not set
> # CONFIG_GPIO_MAX7301 is not set
> # CONFIG_GPIO_MC33880 is not set
> # CONFIG_GPIO_PISOSR is not set
> # CONFIG_GPIO_XRA1403 is not set
> # end of SPI GPIO expanders
> 
> #
> # USB GPIO expanders
> #
> # end of USB GPIO expanders
> 
> #
> # Virtual GPIO drivers
> #
> # CONFIG_GPIO_AGGREGATOR is not set
> # CONFIG_GPIO_MOCKUP is not set
> # CONFIG_GPIO_VIRTIO is not set
> # CONFIG_GPIO_SIM is not set
> # end of Virtual GPIO drivers
> 
> # CONFIG_W1 is not set
> CONFIG_POWER_RESET=y
> # CONFIG_POWER_RESET_RESTART is not set
> CONFIG_POWER_SUPPLY=y
> # CONFIG_POWER_SUPPLY_DEBUG is not set
> CONFIG_POWER_SUPPLY_HWMON=y
> # CONFIG_PDA_POWER is not set
> # CONFIG_IP5XXX_POWER is not set
> # CONFIG_TEST_POWER is not set
> # CONFIG_CHARGER_ADP5061 is not set
> # CONFIG_BATTERY_CW2015 is not set
> # CONFIG_BATTERY_DS2780 is not set
> # CONFIG_BATTERY_DS2781 is not set
> # CONFIG_BATTERY_DS2782 is not set
> # CONFIG_BATTERY_SAMSUNG_SDI is not set
> # CONFIG_BATTERY_SBS is not set
> # CONFIG_CHARGER_SBS is not set
> # CONFIG_MANAGER_SBS is not set
> # CONFIG_BATTERY_BQ27XXX is not set
> # CONFIG_BATTERY_MAX17040 is not set
> # CONFIG_BATTERY_MAX17042 is not set
> # CONFIG_CHARGER_MAX8903 is not set
> # CONFIG_CHARGER_LP8727 is not set
> # CONFIG_CHARGER_GPIO is not set
> # CONFIG_CHARGER_LT3651 is not set
> # CONFIG_CHARGER_LTC4162L is not set
> # CONFIG_CHARGER_MAX77976 is not set
> # CONFIG_CHARGER_BQ2415X is not set
> # CONFIG_CHARGER_BQ24257 is not set
> # CONFIG_CHARGER_BQ24735 is not set
> # CONFIG_CHARGER_BQ2515X is not set
> # CONFIG_CHARGER_BQ25890 is not set
> # CONFIG_CHARGER_BQ25980 is not set
> # CONFIG_CHARGER_BQ256XX is not set
> # CONFIG_BATTERY_GAUGE_LTC2941 is not set
> # CONFIG_BATTERY_GOLDFISH is not set
> # CONFIG_BATTERY_RT5033 is not set
> # CONFIG_CHARGER_RT9455 is not set
> # CONFIG_CHARGER_BD99954 is not set
> # CONFIG_BATTERY_UG3105 is not set
> CONFIG_HWMON=y
> CONFIG_HWMON_VID=m
> # CONFIG_HWMON_DEBUG_CHIP is not set
> 
> #
> # Native drivers
> #
> CONFIG_SENSORS_ABITUGURU=m
> CONFIG_SENSORS_ABITUGURU3=m
> # CONFIG_SENSORS_AD7314 is not set
> CONFIG_SENSORS_AD7414=m
> CONFIG_SENSORS_AD7418=m
> CONFIG_SENSORS_ADM1025=m
> CONFIG_SENSORS_ADM1026=m
> CONFIG_SENSORS_ADM1029=m
> CONFIG_SENSORS_ADM1031=m
> # CONFIG_SENSORS_ADM1177 is not set
> CONFIG_SENSORS_ADM9240=m
> CONFIG_SENSORS_ADT7X10=m
> # CONFIG_SENSORS_ADT7310 is not set
> CONFIG_SENSORS_ADT7410=m
> CONFIG_SENSORS_ADT7411=m
> CONFIG_SENSORS_ADT7462=m
> CONFIG_SENSORS_ADT7470=m
> CONFIG_SENSORS_ADT7475=m
> # CONFIG_SENSORS_AHT10 is not set
> # CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
> # CONFIG_SENSORS_AS370 is not set
> CONFIG_SENSORS_ASC7621=m
> # CONFIG_SENSORS_AXI_FAN_CONTROL is not set
> CONFIG_SENSORS_K8TEMP=m
> CONFIG_SENSORS_K10TEMP=m
> CONFIG_SENSORS_FAM15H_POWER=m
> CONFIG_SENSORS_APPLESMC=m
> CONFIG_SENSORS_ASB100=m
> CONFIG_SENSORS_ATXP1=m
> # CONFIG_SENSORS_CORSAIR_CPRO is not set
> # CONFIG_SENSORS_CORSAIR_PSU is not set
> # CONFIG_SENSORS_DRIVETEMP is not set
> CONFIG_SENSORS_DS620=m
> CONFIG_SENSORS_DS1621=m
> # CONFIG_SENSORS_DELL_SMM is not set
> CONFIG_SENSORS_I5K_AMB=m
> CONFIG_SENSORS_F71805F=m
> CONFIG_SENSORS_F71882FG=m
> CONFIG_SENSORS_F75375S=m
> CONFIG_SENSORS_FSCHMD=m
> # CONFIG_SENSORS_FTSTEUTATES is not set
> CONFIG_SENSORS_GL518SM=m
> CONFIG_SENSORS_GL520SM=m
> CONFIG_SENSORS_G760A=m
> # CONFIG_SENSORS_G762 is not set
> # CONFIG_SENSORS_HIH6130 is not set
> CONFIG_SENSORS_IBMAEM=m
> CONFIG_SENSORS_IBMPEX=m
> CONFIG_SENSORS_I5500=m
> CONFIG_SENSORS_CORETEMP=m
> CONFIG_SENSORS_IT87=m
> CONFIG_SENSORS_JC42=m
> # CONFIG_SENSORS_POWR1220 is not set
> CONFIG_SENSORS_LINEAGE=m
> # CONFIG_SENSORS_LTC2945 is not set
> # CONFIG_SENSORS_LTC2947_I2C is not set
> # CONFIG_SENSORS_LTC2947_SPI is not set
> # CONFIG_SENSORS_LTC2990 is not set
> # CONFIG_SENSORS_LTC2992 is not set
> CONFIG_SENSORS_LTC4151=m
> CONFIG_SENSORS_LTC4215=m
> # CONFIG_SENSORS_LTC4222 is not set
> CONFIG_SENSORS_LTC4245=m
> # CONFIG_SENSORS_LTC4260 is not set
> CONFIG_SENSORS_LTC4261=m
> # CONFIG_SENSORS_MAX1111 is not set
> # CONFIG_SENSORS_MAX127 is not set
> CONFIG_SENSORS_MAX16065=m
> CONFIG_SENSORS_MAX1619=m
> CONFIG_SENSORS_MAX1668=m
> CONFIG_SENSORS_MAX197=m
> # CONFIG_SENSORS_MAX31722 is not set
> # CONFIG_SENSORS_MAX31730 is not set
> # CONFIG_SENSORS_MAX31760 is not set
> # CONFIG_SENSORS_MAX6620 is not set
> # CONFIG_SENSORS_MAX6621 is not set
> CONFIG_SENSORS_MAX6639=m
> CONFIG_SENSORS_MAX6650=m
> CONFIG_SENSORS_MAX6697=m
> # CONFIG_SENSORS_MAX31790 is not set
> CONFIG_SENSORS_MCP3021=m
> # CONFIG_SENSORS_MLXREG_FAN is not set
> # CONFIG_SENSORS_TC654 is not set
> # CONFIG_SENSORS_TPS23861 is not set
> # CONFIG_SENSORS_MR75203 is not set
> # CONFIG_SENSORS_ADCXX is not set
> CONFIG_SENSORS_LM63=m
> # CONFIG_SENSORS_LM70 is not set
> CONFIG_SENSORS_LM73=m
> CONFIG_SENSORS_LM75=m
> CONFIG_SENSORS_LM77=m
> CONFIG_SENSORS_LM78=m
> CONFIG_SENSORS_LM80=m
> CONFIG_SENSORS_LM83=m
> CONFIG_SENSORS_LM85=m
> CONFIG_SENSORS_LM87=m
> CONFIG_SENSORS_LM90=m
> CONFIG_SENSORS_LM92=m
> CONFIG_SENSORS_LM93=m
> CONFIG_SENSORS_LM95234=m
> CONFIG_SENSORS_LM95241=m
> CONFIG_SENSORS_LM95245=m
> CONFIG_SENSORS_PC87360=m
> CONFIG_SENSORS_PC87427=m
> # CONFIG_SENSORS_NCT6683 is not set
> CONFIG_SENSORS_NCT6775_CORE=m
> CONFIG_SENSORS_NCT6775=m
> # CONFIG_SENSORS_NCT6775_I2C is not set
> # CONFIG_SENSORS_NCT7802 is not set
> # CONFIG_SENSORS_NCT7904 is not set
> # CONFIG_SENSORS_NPCM7XX is not set
> # CONFIG_SENSORS_NZXT_KRAKEN2 is not set
> # CONFIG_SENSORS_NZXT_SMART2 is not set
> CONFIG_SENSORS_PCF8591=m
> CONFIG_PMBUS=m
> CONFIG_SENSORS_PMBUS=m
> # CONFIG_SENSORS_ADM1266 is not set
> CONFIG_SENSORS_ADM1275=m
> # CONFIG_SENSORS_BEL_PFE is not set
> # CONFIG_SENSORS_BPA_RS600 is not set
> # CONFIG_SENSORS_DELTA_AHE50DC_FAN is not set
> # CONFIG_SENSORS_FSP_3Y is not set
> # CONFIG_SENSORS_IBM_CFFPS is not set
> # CONFIG_SENSORS_DPS920AB is not set
> # CONFIG_SENSORS_INSPUR_IPSPS is not set
> # CONFIG_SENSORS_IR35221 is not set
> # CONFIG_SENSORS_IR36021 is not set
> # CONFIG_SENSORS_IR38064 is not set
> # CONFIG_SENSORS_IRPS5401 is not set
> # CONFIG_SENSORS_ISL68137 is not set
> CONFIG_SENSORS_LM25066=m
> # CONFIG_SENSORS_LT7182S is not set
> CONFIG_SENSORS_LTC2978=m
> # CONFIG_SENSORS_LTC3815 is not set
> # CONFIG_SENSORS_MAX15301 is not set
> CONFIG_SENSORS_MAX16064=m
> # CONFIG_SENSORS_MAX16601 is not set
> # CONFIG_SENSORS_MAX20730 is not set
> # CONFIG_SENSORS_MAX20751 is not set
> # CONFIG_SENSORS_MAX31785 is not set
> CONFIG_SENSORS_MAX34440=m
> CONFIG_SENSORS_MAX8688=m
> # CONFIG_SENSORS_MP2888 is not set
> # CONFIG_SENSORS_MP2975 is not set
> # CONFIG_SENSORS_MP5023 is not set
> # CONFIG_SENSORS_PIM4328 is not set
> # CONFIG_SENSORS_PLI1209BC is not set
> # CONFIG_SENSORS_PM6764TR is not set
> # CONFIG_SENSORS_PXE1610 is not set
> # CONFIG_SENSORS_Q54SJ108A2 is not set
> # CONFIG_SENSORS_STPDDC60 is not set
> # CONFIG_SENSORS_TPS40422 is not set
> # CONFIG_SENSORS_TPS53679 is not set
> # CONFIG_SENSORS_TPS546D24 is not set
> CONFIG_SENSORS_UCD9000=m
> CONFIG_SENSORS_UCD9200=m
> # CONFIG_SENSORS_XDPE152 is not set
> # CONFIG_SENSORS_XDPE122 is not set
> CONFIG_SENSORS_ZL6100=m
> # CONFIG_SENSORS_SBTSI is not set
> # CONFIG_SENSORS_SBRMI is not set
> CONFIG_SENSORS_SHT15=m
> CONFIG_SENSORS_SHT21=m
> # CONFIG_SENSORS_SHT3x is not set
> # CONFIG_SENSORS_SHT4x is not set
> # CONFIG_SENSORS_SHTC1 is not set
> CONFIG_SENSORS_SIS5595=m
> CONFIG_SENSORS_DME1737=m
> CONFIG_SENSORS_EMC1403=m
> # CONFIG_SENSORS_EMC2103 is not set
> # CONFIG_SENSORS_EMC2305 is not set
> CONFIG_SENSORS_EMC6W201=m
> CONFIG_SENSORS_SMSC47M1=m
> CONFIG_SENSORS_SMSC47M192=m
> CONFIG_SENSORS_SMSC47B397=m
> CONFIG_SENSORS_SCH56XX_COMMON=m
> CONFIG_SENSORS_SCH5627=m
> CONFIG_SENSORS_SCH5636=m
> # CONFIG_SENSORS_STTS751 is not set
> # CONFIG_SENSORS_SMM665 is not set
> # CONFIG_SENSORS_ADC128D818 is not set
> CONFIG_SENSORS_ADS7828=m
> # CONFIG_SENSORS_ADS7871 is not set
> CONFIG_SENSORS_AMC6821=m
> CONFIG_SENSORS_INA209=m
> CONFIG_SENSORS_INA2XX=m
> # CONFIG_SENSORS_INA238 is not set
> # CONFIG_SENSORS_INA3221 is not set
> # CONFIG_SENSORS_TC74 is not set
> CONFIG_SENSORS_THMC50=m
> CONFIG_SENSORS_TMP102=m
> # CONFIG_SENSORS_TMP103 is not set
> # CONFIG_SENSORS_TMP108 is not set
> CONFIG_SENSORS_TMP401=m
> CONFIG_SENSORS_TMP421=m
> # CONFIG_SENSORS_TMP464 is not set
> # CONFIG_SENSORS_TMP513 is not set
> CONFIG_SENSORS_VIA_CPUTEMP=m
> CONFIG_SENSORS_VIA686A=m
> CONFIG_SENSORS_VT1211=m
> CONFIG_SENSORS_VT8231=m
> # CONFIG_SENSORS_W83773G is not set
> CONFIG_SENSORS_W83781D=m
> CONFIG_SENSORS_W83791D=m
> CONFIG_SENSORS_W83792D=m
> CONFIG_SENSORS_W83793=m
> CONFIG_SENSORS_W83795=m
> # CONFIG_SENSORS_W83795_FANCTRL is not set
> CONFIG_SENSORS_W83L785TS=m
> CONFIG_SENSORS_W83L786NG=m
> CONFIG_SENSORS_W83627HF=m
> CONFIG_SENSORS_W83627EHF=m
> # CONFIG_SENSORS_XGENE is not set
> 
> #
> # ACPI drivers
> #
> CONFIG_SENSORS_ACPI_POWER=m
> CONFIG_SENSORS_ATK0110=m
> # CONFIG_SENSORS_ASUS_WMI is not set
> # CONFIG_SENSORS_ASUS_EC is not set
> CONFIG_THERMAL=y
> # CONFIG_THERMAL_NETLINK is not set
> # CONFIG_THERMAL_STATISTICS is not set
> CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
> CONFIG_THERMAL_HWMON=y
> CONFIG_THERMAL_WRITABLE_TRIPS=y
> CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
> # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
> # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
> CONFIG_THERMAL_GOV_FAIR_SHARE=y
> CONFIG_THERMAL_GOV_STEP_WISE=y
> CONFIG_THERMAL_GOV_BANG_BANG=y
> CONFIG_THERMAL_GOV_USER_SPACE=y
> # CONFIG_THERMAL_EMULATION is not set
> 
> #
> # Intel thermal drivers
> #
> CONFIG_INTEL_POWERCLAMP=m
> CONFIG_X86_THERMAL_VECTOR=y
> CONFIG_X86_PKG_TEMP_THERMAL=m
> # CONFIG_INTEL_SOC_DTS_THERMAL is not set
> 
> #
> # ACPI INT340X thermal drivers
> #
> # CONFIG_INT340X_THERMAL is not set
> # end of ACPI INT340X thermal drivers
> 
> CONFIG_INTEL_PCH_THERMAL=m
> # CONFIG_INTEL_TCC_COOLING is not set
> # CONFIG_INTEL_MENLOW is not set
> # CONFIG_INTEL_HFI_THERMAL is not set
> # end of Intel thermal drivers
> 
> CONFIG_WATCHDOG=y
> CONFIG_WATCHDOG_CORE=y
> # CONFIG_WATCHDOG_NOWAYOUT is not set
> CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
> CONFIG_WATCHDOG_OPEN_TIMEOUT=0
> CONFIG_WATCHDOG_SYSFS=y
> # CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set
> 
> #
> # Watchdog Pretimeout Governors
> #
> # CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
> 
> #
> # Watchdog Device Drivers
> #
> CONFIG_SOFT_WATCHDOG=m
> CONFIG_WDAT_WDT=m
> # CONFIG_XILINX_WATCHDOG is not set
> # CONFIG_ZIIRAVE_WATCHDOG is not set
> # CONFIG_MLX_WDT is not set
> # CONFIG_CADENCE_WATCHDOG is not set
> # CONFIG_DW_WATCHDOG is not set
> # CONFIG_MAX63XX_WATCHDOG is not set
> # CONFIG_ACQUIRE_WDT is not set
> # CONFIG_ADVANTECH_WDT is not set
> CONFIG_ALIM1535_WDT=m
> CONFIG_ALIM7101_WDT=m
> # CONFIG_EBC_C384_WDT is not set
> # CONFIG_EXAR_WDT is not set
> CONFIG_F71808E_WDT=m
> # CONFIG_SP5100_TCO is not set
> CONFIG_SBC_FITPC2_WATCHDOG=m
> # CONFIG_EUROTECH_WDT is not set
> CONFIG_IB700_WDT=m
> CONFIG_IBMASR=m
> # CONFIG_WAFER_WDT is not set
> CONFIG_I6300ESB_WDT=y
> CONFIG_IE6XX_WDT=m
> CONFIG_ITCO_WDT=y
> CONFIG_ITCO_VENDOR_SUPPORT=y
> CONFIG_IT8712F_WDT=m
> CONFIG_IT87_WDT=m
> CONFIG_HP_WATCHDOG=m
> CONFIG_HPWDT_NMI_DECODING=y
> # CONFIG_SC1200_WDT is not set
> # CONFIG_PC87413_WDT is not set
> CONFIG_NV_TCO=m
> # CONFIG_60XX_WDT is not set
> # CONFIG_CPU5_WDT is not set
> CONFIG_SMSC_SCH311X_WDT=m
> # CONFIG_SMSC37B787_WDT is not set
> # CONFIG_TQMX86_WDT is not set
> CONFIG_VIA_WDT=m
> CONFIG_W83627HF_WDT=m
> CONFIG_W83877F_WDT=m
> CONFIG_W83977F_WDT=m
> CONFIG_MACHZ_WDT=m
> # CONFIG_SBC_EPX_C3_WATCHDOG is not set
> CONFIG_INTEL_MEI_WDT=m
> # CONFIG_NI903X_WDT is not set
> # CONFIG_NIC7018_WDT is not set
> # CONFIG_MEN_A21_WDT is not set
> 
> #
> # PCI-based Watchdog Cards
> #
> CONFIG_PCIPCWATCHDOG=m
> CONFIG_WDTPCI=m
> 
> #
> # USB-based Watchdog Cards
> #
> # CONFIG_USBPCWATCHDOG is not set
> CONFIG_SSB_POSSIBLE=y
> # CONFIG_SSB is not set
> CONFIG_BCMA_POSSIBLE=y
> CONFIG_BCMA=m
> CONFIG_BCMA_HOST_PCI_POSSIBLE=y
> CONFIG_BCMA_HOST_PCI=y
> # CONFIG_BCMA_HOST_SOC is not set
> CONFIG_BCMA_DRIVER_PCI=y
> CONFIG_BCMA_DRIVER_GMAC_CMN=y
> CONFIG_BCMA_DRIVER_GPIO=y
> # CONFIG_BCMA_DEBUG is not set
> 
> #
> # Multifunction device drivers
> #
> CONFIG_MFD_CORE=y
> # CONFIG_MFD_AS3711 is not set
> # CONFIG_PMIC_ADP5520 is not set
> # CONFIG_MFD_AAT2870_CORE is not set
> # CONFIG_MFD_BCM590XX is not set
> # CONFIG_MFD_BD9571MWV is not set
> # CONFIG_MFD_AXP20X_I2C is not set
> # CONFIG_MFD_MADERA is not set
> # CONFIG_PMIC_DA903X is not set
> # CONFIG_MFD_DA9052_SPI is not set
> # CONFIG_MFD_DA9052_I2C is not set
> # CONFIG_MFD_DA9055 is not set
> # CONFIG_MFD_DA9062 is not set
> # CONFIG_MFD_DA9063 is not set
> # CONFIG_MFD_DA9150 is not set
> # CONFIG_MFD_DLN2 is not set
> # CONFIG_MFD_MC13XXX_SPI is not set
> # CONFIG_MFD_MC13XXX_I2C is not set
> # CONFIG_MFD_MP2629 is not set
> # CONFIG_HTC_PASIC3 is not set
> # CONFIG_HTC_I2CPLD is not set
> # CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
> CONFIG_LPC_ICH=y
> CONFIG_LPC_SCH=m
> CONFIG_MFD_INTEL_LPSS=y
> CONFIG_MFD_INTEL_LPSS_ACPI=y
> CONFIG_MFD_INTEL_LPSS_PCI=y
> # CONFIG_MFD_INTEL_PMC_BXT is not set
> # CONFIG_MFD_IQS62X is not set
> # CONFIG_MFD_JANZ_CMODIO is not set
> # CONFIG_MFD_KEMPLD is not set
> # CONFIG_MFD_88PM800 is not set
> # CONFIG_MFD_88PM805 is not set
> # CONFIG_MFD_88PM860X is not set
> # CONFIG_MFD_MAX14577 is not set
> # CONFIG_MFD_MAX77693 is not set
> # CONFIG_MFD_MAX77843 is not set
> # CONFIG_MFD_MAX8907 is not set
> # CONFIG_MFD_MAX8925 is not set
> # CONFIG_MFD_MAX8997 is not set
> # CONFIG_MFD_MAX8998 is not set
> # CONFIG_MFD_MT6360 is not set
> # CONFIG_MFD_MT6370 is not set
> # CONFIG_MFD_MT6397 is not set
> # CONFIG_MFD_MENF21BMC is not set
> # CONFIG_MFD_OCELOT is not set
> # CONFIG_EZX_PCAP is not set
> # CONFIG_MFD_VIPERBOARD is not set
> # CONFIG_MFD_RETU is not set
> # CONFIG_MFD_PCF50633 is not set
> # CONFIG_MFD_SY7636A is not set
> # CONFIG_MFD_RDC321X is not set
> # CONFIG_MFD_RT4831 is not set
> # CONFIG_MFD_RT5033 is not set
> # CONFIG_MFD_RT5120 is not set
> # CONFIG_MFD_RC5T583 is not set
> # CONFIG_MFD_SI476X_CORE is not set
> CONFIG_MFD_SM501=m
> CONFIG_MFD_SM501_GPIO=y
> # CONFIG_MFD_SKY81452 is not set
> # CONFIG_MFD_SYSCON is not set
> # CONFIG_MFD_TI_AM335X_TSCADC is not set
> # CONFIG_MFD_LP3943 is not set
> # CONFIG_MFD_LP8788 is not set
> # CONFIG_MFD_TI_LMU is not set
> # CONFIG_MFD_PALMAS is not set
> # CONFIG_TPS6105X is not set
> # CONFIG_TPS65010 is not set
> # CONFIG_TPS6507X is not set
> # CONFIG_MFD_TPS65086 is not set
> # CONFIG_MFD_TPS65090 is not set
> # CONFIG_MFD_TI_LP873X is not set
> # CONFIG_MFD_TPS6586X is not set
> # CONFIG_MFD_TPS65910 is not set
> # CONFIG_MFD_TPS65912_I2C is not set
> # CONFIG_MFD_TPS65912_SPI is not set
> # CONFIG_TWL4030_CORE is not set
> # CONFIG_TWL6040_CORE is not set
> # CONFIG_MFD_WL1273_CORE is not set
> # CONFIG_MFD_LM3533 is not set
> # CONFIG_MFD_TQMX86 is not set
> CONFIG_MFD_VX855=m
> # CONFIG_MFD_ARIZONA_I2C is not set
> # CONFIG_MFD_ARIZONA_SPI is not set
> # CONFIG_MFD_WM8400 is not set
> # CONFIG_MFD_WM831X_I2C is not set
> # CONFIG_MFD_WM831X_SPI is not set
> # CONFIG_MFD_WM8350_I2C is not set
> # CONFIG_MFD_WM8994 is not set
> # CONFIG_MFD_ATC260X_I2C is not set
> # CONFIG_MFD_INTEL_M10_BMC is not set
> # end of Multifunction device drivers
> 
> # CONFIG_REGULATOR is not set
> CONFIG_RC_CORE=m
> CONFIG_LIRC=y
> CONFIG_RC_MAP=m
> CONFIG_RC_DECODERS=y
> CONFIG_IR_IMON_DECODER=m
> CONFIG_IR_JVC_DECODER=m
> CONFIG_IR_MCE_KBD_DECODER=m
> CONFIG_IR_NEC_DECODER=m
> CONFIG_IR_RC5_DECODER=m
> CONFIG_IR_RC6_DECODER=m
> # CONFIG_IR_RCMM_DECODER is not set
> CONFIG_IR_SANYO_DECODER=m
> # CONFIG_IR_SHARP_DECODER is not set
> CONFIG_IR_SONY_DECODER=m
> # CONFIG_IR_XMP_DECODER is not set
> CONFIG_RC_DEVICES=y
> CONFIG_IR_ENE=m
> CONFIG_IR_FINTEK=m
> # CONFIG_IR_IGORPLUGUSB is not set
> # CONFIG_IR_IGUANA is not set
> # CONFIG_IR_IMON is not set
> # CONFIG_IR_IMON_RAW is not set
> CONFIG_IR_ITE_CIR=m
> # CONFIG_IR_MCEUSB is not set
> CONFIG_IR_NUVOTON=m
> # CONFIG_IR_REDRAT3 is not set
> CONFIG_IR_SERIAL=m
> CONFIG_IR_SERIAL_TRANSMITTER=y
> # CONFIG_IR_STREAMZAP is not set
> # CONFIG_IR_TOY is not set
> # CONFIG_IR_TTUSBIR is not set
> CONFIG_IR_WINBOND_CIR=m
> # CONFIG_RC_ATI_REMOTE is not set
> # CONFIG_RC_LOOPBACK is not set
> # CONFIG_RC_XBOX_DVD is not set
> 
> #
> # CEC support
> #
> # CONFIG_MEDIA_CEC_SUPPORT is not set
> # end of CEC support
> 
> CONFIG_MEDIA_SUPPORT=m
> CONFIG_MEDIA_SUPPORT_FILTER=y
> CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
> 
> #
> # Media device types
> #
> # CONFIG_MEDIA_CAMERA_SUPPORT is not set
> # CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
> # CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
> # CONFIG_MEDIA_RADIO_SUPPORT is not set
> # CONFIG_MEDIA_SDR_SUPPORT is not set
> # CONFIG_MEDIA_PLATFORM_SUPPORT is not set
> # CONFIG_MEDIA_TEST_SUPPORT is not set
> # end of Media device types
> 
> #
> # Media drivers
> #
> 
> #
> # Drivers filtered as selected at 'Filter media drivers'
> #
> 
> #
> # Media drivers
> #
> # CONFIG_MEDIA_USB_SUPPORT is not set
> # CONFIG_MEDIA_PCI_SUPPORT is not set
> # end of Media drivers
> 
> CONFIG_MEDIA_HIDE_ANCILLARY_SUBDRV=y
> 
> #
> # Media ancillary drivers
> #
> # end of Media ancillary drivers
> 
> #
> # Graphics support
> #
> CONFIG_APERTURE_HELPERS=y
> # CONFIG_AGP is not set
> CONFIG_INTEL_GTT=m
> CONFIG_VGA_SWITCHEROO=y
> CONFIG_DRM=m
> CONFIG_DRM_MIPI_DSI=y
> CONFIG_DRM_USE_DYNAMIC_DEBUG=y
> CONFIG_DRM_KMS_HELPER=m
> CONFIG_DRM_FBDEV_EMULATION=y
> CONFIG_DRM_FBDEV_OVERALLOC=100
> CONFIG_DRM_LOAD_EDID_FIRMWARE=y
> CONFIG_DRM_DISPLAY_HELPER=m
> CONFIG_DRM_DISPLAY_DP_HELPER=y
> CONFIG_DRM_DISPLAY_HDCP_HELPER=y
> CONFIG_DRM_DISPLAY_HDMI_HELPER=y
> CONFIG_DRM_DP_AUX_CHARDEV=y
> # CONFIG_DRM_DP_CEC is not set
> CONFIG_DRM_TTM=m
> CONFIG_DRM_BUDDY=m
> CONFIG_DRM_VRAM_HELPER=m
> CONFIG_DRM_TTM_HELPER=m
> CONFIG_DRM_GEM_SHMEM_HELPER=m
> 
> #
> # I2C encoder or helper chips
> #
> CONFIG_DRM_I2C_CH7006=m
> CONFIG_DRM_I2C_SIL164=m
> # CONFIG_DRM_I2C_NXP_TDA998X is not set
> # CONFIG_DRM_I2C_NXP_TDA9950 is not set
> # end of I2C encoder or helper chips
> 
> #
> # ARM devices
> #
> # end of ARM devices
> 
> # CONFIG_DRM_RADEON is not set
> # CONFIG_DRM_AMDGPU is not set
> # CONFIG_DRM_NOUVEAU is not set
> CONFIG_DRM_I915=m
> CONFIG_DRM_I915_FORCE_PROBE=""
> CONFIG_DRM_I915_CAPTURE_ERROR=y
> CONFIG_DRM_I915_COMPRESS_ERROR=y
> CONFIG_DRM_I915_USERPTR=y
> # CONFIG_DRM_I915_GVT_KVMGT is not set
> CONFIG_DRM_I915_REQUEST_TIMEOUT=20000
> CONFIG_DRM_I915_FENCE_TIMEOUT=10000
> CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
> CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
> CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
> CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000
> CONFIG_DRM_I915_STOP_TIMEOUT=100
> CONFIG_DRM_I915_TIMESLICE_DURATION=1
> # CONFIG_DRM_VGEM is not set
> # CONFIG_DRM_VKMS is not set
> # CONFIG_DRM_VMWGFX is not set
> CONFIG_DRM_GMA500=m
> # CONFIG_DRM_UDL is not set
> CONFIG_DRM_AST=m
> # CONFIG_DRM_MGAG200 is not set
> CONFIG_DRM_QXL=m
> CONFIG_DRM_VIRTIO_GPU=m
> CONFIG_DRM_PANEL=y
> 
> #
> # Display Panels
> #
> # CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
> # CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set
> # end of Display Panels
> 
> CONFIG_DRM_BRIDGE=y
> CONFIG_DRM_PANEL_BRIDGE=y
> 
> #
> # Display Interface Bridges
> #
> # CONFIG_DRM_ANALOGIX_ANX78XX is not set
> # end of Display Interface Bridges
> 
> # CONFIG_DRM_ETNAVIV is not set
> CONFIG_DRM_BOCHS=m
> CONFIG_DRM_CIRRUS_QEMU=m
> # CONFIG_DRM_GM12U320 is not set
> # CONFIG_DRM_PANEL_MIPI_DBI is not set
> # CONFIG_DRM_SIMPLEDRM is not set
> # CONFIG_TINYDRM_HX8357D is not set
> # CONFIG_TINYDRM_ILI9163 is not set
> # CONFIG_TINYDRM_ILI9225 is not set
> # CONFIG_TINYDRM_ILI9341 is not set
> # CONFIG_TINYDRM_ILI9486 is not set
> # CONFIG_TINYDRM_MI0283QT is not set
> # CONFIG_TINYDRM_REPAPER is not set
> # CONFIG_TINYDRM_ST7586 is not set
> # CONFIG_TINYDRM_ST7735R is not set
> # CONFIG_DRM_VBOXVIDEO is not set
> # CONFIG_DRM_GUD is not set
> # CONFIG_DRM_SSD130X is not set
> # CONFIG_DRM_LEGACY is not set
> CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
> CONFIG_DRM_NOMODESET=y
> CONFIG_DRM_PRIVACY_SCREEN=y
> 
> #
> # Frame buffer Devices
> #
> CONFIG_FB_CMDLINE=y
> CONFIG_FB_NOTIFY=y
> CONFIG_FB=y
> # CONFIG_FIRMWARE_EDID is not set
> CONFIG_FB_CFB_FILLRECT=y
> CONFIG_FB_CFB_COPYAREA=y
> CONFIG_FB_CFB_IMAGEBLIT=y
> CONFIG_FB_SYS_FILLRECT=m
> CONFIG_FB_SYS_COPYAREA=m
> CONFIG_FB_SYS_IMAGEBLIT=m
> # CONFIG_FB_FOREIGN_ENDIAN is not set
> CONFIG_FB_SYS_FOPS=m
> CONFIG_FB_DEFERRED_IO=y
> # CONFIG_FB_MODE_HELPERS is not set
> CONFIG_FB_TILEBLITTING=y
> 
> #
> # Frame buffer hardware drivers
> #
> # CONFIG_FB_CIRRUS is not set
> # CONFIG_FB_PM2 is not set
> # CONFIG_FB_CYBER2000 is not set
> # CONFIG_FB_ARC is not set
> # CONFIG_FB_ASILIANT is not set
> # CONFIG_FB_IMSTT is not set
> # CONFIG_FB_VGA16 is not set
> # CONFIG_FB_UVESA is not set
> CONFIG_FB_VESA=y
> CONFIG_FB_EFI=y
> # CONFIG_FB_N411 is not set
> # CONFIG_FB_HGA is not set
> # CONFIG_FB_OPENCORES is not set
> # CONFIG_FB_S1D13XXX is not set
> # CONFIG_FB_NVIDIA is not set
> # CONFIG_FB_RIVA is not set
> # CONFIG_FB_I740 is not set
> # CONFIG_FB_LE80578 is not set
> # CONFIG_FB_MATROX is not set
> # CONFIG_FB_RADEON is not set
> # CONFIG_FB_ATY128 is not set
> # CONFIG_FB_ATY is not set
> # CONFIG_FB_S3 is not set
> # CONFIG_FB_SAVAGE is not set
> # CONFIG_FB_SIS is not set
> # CONFIG_FB_VIA is not set
> # CONFIG_FB_NEOMAGIC is not set
> # CONFIG_FB_KYRO is not set
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> # CONFIG_FB_VT8623 is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_ARK is not set
> # CONFIG_FB_PM3 is not set
> # CONFIG_FB_CARMINE is not set
> # CONFIG_FB_SM501 is not set
> # CONFIG_FB_SMSCUFX is not set
> # CONFIG_FB_UDL is not set
> # CONFIG_FB_IBM_GXT4500 is not set
> # CONFIG_FB_VIRTUAL is not set
> # CONFIG_FB_METRONOME is not set
> # CONFIG_FB_MB862XX is not set
> # CONFIG_FB_SIMPLE is not set
> # CONFIG_FB_SSD1307 is not set
> # CONFIG_FB_SM712 is not set
> # end of Frame buffer Devices
> 
> #
> # Backlight & LCD device support
> #
> CONFIG_LCD_CLASS_DEVICE=m
> # CONFIG_LCD_L4F00242T03 is not set
> # CONFIG_LCD_LMS283GF05 is not set
> # CONFIG_LCD_LTV350QV is not set
> # CONFIG_LCD_ILI922X is not set
> # CONFIG_LCD_ILI9320 is not set
> # CONFIG_LCD_TDO24M is not set
> # CONFIG_LCD_VGG2432A4 is not set
> CONFIG_LCD_PLATFORM=m
> # CONFIG_LCD_AMS369FG06 is not set
> # CONFIG_LCD_LMS501KF03 is not set
> # CONFIG_LCD_HX8357 is not set
> # CONFIG_LCD_OTM3225A is not set
> CONFIG_BACKLIGHT_CLASS_DEVICE=y
> # CONFIG_BACKLIGHT_KTD253 is not set
> # CONFIG_BACKLIGHT_PWM is not set
> CONFIG_BACKLIGHT_APPLE=m
> # CONFIG_BACKLIGHT_QCOM_WLED is not set
> # CONFIG_BACKLIGHT_SAHARA is not set
> # CONFIG_BACKLIGHT_ADP8860 is not set
> # CONFIG_BACKLIGHT_ADP8870 is not set
> # CONFIG_BACKLIGHT_LM3630A is not set
> # CONFIG_BACKLIGHT_LM3639 is not set
> CONFIG_BACKLIGHT_LP855X=m
> # CONFIG_BACKLIGHT_GPIO is not set
> # CONFIG_BACKLIGHT_LV5207LP is not set
> # CONFIG_BACKLIGHT_BD6107 is not set
> # CONFIG_BACKLIGHT_ARCXCNN is not set
> # end of Backlight & LCD device support
> 
> CONFIG_HDMI=y
> 
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_DUMMY_CONSOLE_COLUMNS=80
> CONFIG_DUMMY_CONSOLE_ROWS=25
> CONFIG_FRAMEBUFFER_CONSOLE=y
> # CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
> CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
> CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
> # CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
> # end of Console display driver support
> 
> CONFIG_LOGO=y
> # CONFIG_LOGO_LINUX_MONO is not set
> # CONFIG_LOGO_LINUX_VGA16 is not set
> CONFIG_LOGO_LINUX_CLUT224=y
> # end of Graphics support
> 
> # CONFIG_SOUND is not set
> 
> #
> # HID support
> #
> CONFIG_HID=y
> CONFIG_HID_BATTERY_STRENGTH=y
> CONFIG_HIDRAW=y
> CONFIG_UHID=m
> CONFIG_HID_GENERIC=y
> 
> #
> # Special HID drivers
> #
> CONFIG_HID_A4TECH=m
> # CONFIG_HID_ACCUTOUCH is not set
> CONFIG_HID_ACRUX=m
> # CONFIG_HID_ACRUX_FF is not set
> CONFIG_HID_APPLE=m
> # CONFIG_HID_APPLEIR is not set
> CONFIG_HID_ASUS=m
> CONFIG_HID_AUREAL=m
> CONFIG_HID_BELKIN=m
> # CONFIG_HID_BETOP_FF is not set
> # CONFIG_HID_BIGBEN_FF is not set
> CONFIG_HID_CHERRY=m
> # CONFIG_HID_CHICONY is not set
> # CONFIG_HID_CORSAIR is not set
> # CONFIG_HID_COUGAR is not set
> # CONFIG_HID_MACALLY is not set
> CONFIG_HID_CMEDIA=m
> # CONFIG_HID_CP2112 is not set
> # CONFIG_HID_CREATIVE_SB0540 is not set
> CONFIG_HID_CYPRESS=m
> CONFIG_HID_DRAGONRISE=m
> # CONFIG_DRAGONRISE_FF is not set
> # CONFIG_HID_EMS_FF is not set
> # CONFIG_HID_ELAN is not set
> CONFIG_HID_ELECOM=m
> # CONFIG_HID_ELO is not set
> CONFIG_HID_EZKEY=m
> # CONFIG_HID_FT260 is not set
> CONFIG_HID_GEMBIRD=m
> CONFIG_HID_GFRM=m
> # CONFIG_HID_GLORIOUS is not set
> # CONFIG_HID_HOLTEK is not set
> # CONFIG_HID_VIVALDI is not set
> # CONFIG_HID_GT683R is not set
> CONFIG_HID_KEYTOUCH=m
> CONFIG_HID_KYE=m
> # CONFIG_HID_UCLOGIC is not set
> CONFIG_HID_WALTOP=m
> # CONFIG_HID_VIEWSONIC is not set
> # CONFIG_HID_VRC2 is not set
> # CONFIG_HID_XIAOMI is not set
> CONFIG_HID_GYRATION=m
> CONFIG_HID_ICADE=m
> CONFIG_HID_ITE=m
> CONFIG_HID_JABRA=m
> CONFIG_HID_TWINHAN=m
> CONFIG_HID_KENSINGTON=m
> CONFIG_HID_LCPOWER=m
> CONFIG_HID_LED=m
> CONFIG_HID_LENOVO=m
> # CONFIG_HID_LETSKETCH is not set
> CONFIG_HID_LOGITECH=m
> CONFIG_HID_LOGITECH_DJ=m
> CONFIG_HID_LOGITECH_HIDPP=m
> # CONFIG_LOGITECH_FF is not set
> # CONFIG_LOGIRUMBLEPAD2_FF is not set
> # CONFIG_LOGIG940_FF is not set
> # CONFIG_LOGIWHEELS_FF is not set
> CONFIG_HID_MAGICMOUSE=y
> # CONFIG_HID_MALTRON is not set
> # CONFIG_HID_MAYFLASH is not set
> # CONFIG_HID_MEGAWORLD_FF is not set
> # CONFIG_HID_REDRAGON is not set
> CONFIG_HID_MICROSOFT=m
> CONFIG_HID_MONTEREY=m
> CONFIG_HID_MULTITOUCH=m
> # CONFIG_HID_NINTENDO is not set
> CONFIG_HID_NTI=m
> # CONFIG_HID_NTRIG is not set
> CONFIG_HID_ORTEK=m
> CONFIG_HID_PANTHERLORD=m
> # CONFIG_PANTHERLORD_FF is not set
> # CONFIG_HID_PENMOUNT is not set
> CONFIG_HID_PETALYNX=m
> CONFIG_HID_PICOLCD=m
> CONFIG_HID_PICOLCD_FB=y
> CONFIG_HID_PICOLCD_BACKLIGHT=y
> CONFIG_HID_PICOLCD_LCD=y
> CONFIG_HID_PICOLCD_LEDS=y
> CONFIG_HID_PICOLCD_CIR=y
> CONFIG_HID_PLANTRONICS=m
> # CONFIG_HID_PXRC is not set
> # CONFIG_HID_RAZER is not set
> CONFIG_HID_PRIMAX=m
> # CONFIG_HID_RETRODE is not set
> # CONFIG_HID_ROCCAT is not set
> CONFIG_HID_SAITEK=m
> CONFIG_HID_SAMSUNG=m
> # CONFIG_HID_SEMITEK is not set
> # CONFIG_HID_SIGMAMICRO is not set
> # CONFIG_HID_SONY is not set
> CONFIG_HID_SPEEDLINK=m
> # CONFIG_HID_STEAM is not set
> CONFIG_HID_STEELSERIES=m
> CONFIG_HID_SUNPLUS=m
> CONFIG_HID_RMI=m
> CONFIG_HID_GREENASIA=m
> # CONFIG_GREENASIA_FF is not set
> CONFIG_HID_SMARTJOYPLUS=m
> # CONFIG_SMARTJOYPLUS_FF is not set
> CONFIG_HID_TIVO=m
> CONFIG_HID_TOPSEED=m
> # CONFIG_HID_TOPRE is not set
> CONFIG_HID_THINGM=m
> CONFIG_HID_THRUSTMASTER=m
> # CONFIG_THRUSTMASTER_FF is not set
> # CONFIG_HID_UDRAW_PS3 is not set
> # CONFIG_HID_U2FZERO is not set
> # CONFIG_HID_WACOM is not set
> CONFIG_HID_WIIMOTE=m
> CONFIG_HID_XINMO=m
> CONFIG_HID_ZEROPLUS=m
> # CONFIG_ZEROPLUS_FF is not set
> CONFIG_HID_ZYDACRON=m
> CONFIG_HID_SENSOR_HUB=y
> CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
> CONFIG_HID_ALPS=m
> # CONFIG_HID_MCP2221 is not set
> # end of Special HID drivers
> 
> #
> # USB HID support
> #
> CONFIG_USB_HID=y
> # CONFIG_HID_PID is not set
> # CONFIG_USB_HIDDEV is not set
> # end of USB HID support
> 
> #
> # I2C HID support
> #
> # CONFIG_I2C_HID_ACPI is not set
> # end of I2C HID support
> 
> #
> # Intel ISH HID support
> #
> CONFIG_INTEL_ISH_HID=m
> # CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER is not set
> # end of Intel ISH HID support
> 
> #
> # AMD SFH HID Support
> #
> # CONFIG_AMD_SFH_HID is not set
> # end of AMD SFH HID Support
> # end of HID support
> 
> CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> CONFIG_USB_SUPPORT=y
> CONFIG_USB_COMMON=y
> # CONFIG_USB_LED_TRIG is not set
> # CONFIG_USB_ULPI_BUS is not set
> # CONFIG_USB_CONN_GPIO is not set
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB=y
> CONFIG_USB_PCI=y
> CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
> 
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEFAULT_PERSIST=y
> # CONFIG_USB_FEW_INIT_RETRIES is not set
> # CONFIG_USB_DYNAMIC_MINORS is not set
> # CONFIG_USB_OTG is not set
> # CONFIG_USB_OTG_PRODUCTLIST is not set
> CONFIG_USB_LEDS_TRIGGER_USBPORT=y
> CONFIG_USB_AUTOSUSPEND_DELAY=2
> CONFIG_USB_MON=y
> 
> #
> # USB Host Controller Drivers
> #
> # CONFIG_USB_C67X00_HCD is not set
> CONFIG_USB_XHCI_HCD=y
> # CONFIG_USB_XHCI_DBGCAP is not set
> CONFIG_USB_XHCI_PCI=y
> # CONFIG_USB_XHCI_PCI_RENESAS is not set
> # CONFIG_USB_XHCI_PLATFORM is not set
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_EHCI_ROOT_HUB_TT=y
> CONFIG_USB_EHCI_TT_NEWSCHED=y
> CONFIG_USB_EHCI_PCI=y
> # CONFIG_USB_EHCI_FSL is not set
> # CONFIG_USB_EHCI_HCD_PLATFORM is not set
> # CONFIG_USB_OXU210HP_HCD is not set
> # CONFIG_USB_ISP116X_HCD is not set
> # CONFIG_USB_FOTG210_HCD is not set
> # CONFIG_USB_MAX3421_HCD is not set
> CONFIG_USB_OHCI_HCD=y
> CONFIG_USB_OHCI_HCD_PCI=y
> # CONFIG_USB_OHCI_HCD_PLATFORM is not set
> CONFIG_USB_UHCI_HCD=y
> # CONFIG_USB_SL811_HCD is not set
> # CONFIG_USB_R8A66597_HCD is not set
> # CONFIG_USB_HCD_BCMA is not set
> # CONFIG_USB_HCD_TEST_MODE is not set
> 
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_ACM is not set
> # CONFIG_USB_PRINTER is not set
> # CONFIG_USB_WDM is not set
> # CONFIG_USB_TMC is not set
> 
> #
> # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
> #
> 
> #
> # also be needed; see USB_STORAGE Help for more info
> #
> CONFIG_USB_STORAGE=m
> # CONFIG_USB_STORAGE_DEBUG is not set
> # CONFIG_USB_STORAGE_REALTEK is not set
> # CONFIG_USB_STORAGE_DATAFAB is not set
> # CONFIG_USB_STORAGE_FREECOM is not set
> # CONFIG_USB_STORAGE_ISD200 is not set
> # CONFIG_USB_STORAGE_USBAT is not set
> # CONFIG_USB_STORAGE_SDDR09 is not set
> # CONFIG_USB_STORAGE_SDDR55 is not set
> # CONFIG_USB_STORAGE_JUMPSHOT is not set
> # CONFIG_USB_STORAGE_ALAUDA is not set
> # CONFIG_USB_STORAGE_ONETOUCH is not set
> # CONFIG_USB_STORAGE_KARMA is not set
> # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
> # CONFIG_USB_STORAGE_ENE_UB6250 is not set
> # CONFIG_USB_UAS is not set
> 
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_MICROTEK is not set
> # CONFIG_USBIP_CORE is not set
> # CONFIG_USB_CDNS_SUPPORT is not set
> # CONFIG_USB_MUSB_HDRC is not set
> # CONFIG_USB_DWC3 is not set
> # CONFIG_USB_DWC2 is not set
> # CONFIG_USB_CHIPIDEA is not set
> # CONFIG_USB_ISP1760 is not set
> 
> #
> # USB port drivers
> #
> # CONFIG_USB_USS720 is not set
> CONFIG_USB_SERIAL=m
> CONFIG_USB_SERIAL_GENERIC=y
> # CONFIG_USB_SERIAL_SIMPLE is not set
> # CONFIG_USB_SERIAL_AIRCABLE is not set
> # CONFIG_USB_SERIAL_ARK3116 is not set
> # CONFIG_USB_SERIAL_BELKIN is not set
> # CONFIG_USB_SERIAL_CH341 is not set
> # CONFIG_USB_SERIAL_WHITEHEAT is not set
> # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
> # CONFIG_USB_SERIAL_CP210X is not set
> # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
> # CONFIG_USB_SERIAL_EMPEG is not set
> # CONFIG_USB_SERIAL_FTDI_SIO is not set
> # CONFIG_USB_SERIAL_VISOR is not set
> # CONFIG_USB_SERIAL_IPAQ is not set
> # CONFIG_USB_SERIAL_IR is not set
> # CONFIG_USB_SERIAL_EDGEPORT is not set
> # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
> # CONFIG_USB_SERIAL_F81232 is not set
> # CONFIG_USB_SERIAL_F8153X is not set
> # CONFIG_USB_SERIAL_GARMIN is not set
> # CONFIG_USB_SERIAL_IPW is not set
> # CONFIG_USB_SERIAL_IUU is not set
> # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
> # CONFIG_USB_SERIAL_KEYSPAN is not set
> # CONFIG_USB_SERIAL_KLSI is not set
> # CONFIG_USB_SERIAL_KOBIL_SCT is not set
> # CONFIG_USB_SERIAL_MCT_U232 is not set
> # CONFIG_USB_SERIAL_METRO is not set
> # CONFIG_USB_SERIAL_MOS7720 is not set
> # CONFIG_USB_SERIAL_MOS7840 is not set
> # CONFIG_USB_SERIAL_MXUPORT is not set
> # CONFIG_USB_SERIAL_NAVMAN is not set
> # CONFIG_USB_SERIAL_PL2303 is not set
> # CONFIG_USB_SERIAL_OTI6858 is not set
> # CONFIG_USB_SERIAL_QCAUX is not set
> # CONFIG_USB_SERIAL_QUALCOMM is not set
> # CONFIG_USB_SERIAL_SPCP8X5 is not set
> # CONFIG_USB_SERIAL_SAFE is not set
> # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
> # CONFIG_USB_SERIAL_SYMBOL is not set
> # CONFIG_USB_SERIAL_TI is not set
> # CONFIG_USB_SERIAL_CYBERJACK is not set
> # CONFIG_USB_SERIAL_OPTION is not set
> # CONFIG_USB_SERIAL_OMNINET is not set
> # CONFIG_USB_SERIAL_OPTICON is not set
> # CONFIG_USB_SERIAL_XSENS_MT is not set
> # CONFIG_USB_SERIAL_WISHBONE is not set
> # CONFIG_USB_SERIAL_SSU100 is not set
> # CONFIG_USB_SERIAL_QT2 is not set
> # CONFIG_USB_SERIAL_UPD78F0730 is not set
> # CONFIG_USB_SERIAL_XR is not set
> CONFIG_USB_SERIAL_DEBUG=m
> 
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI62 is not set
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_ADUTUX is not set
> # CONFIG_USB_SEVSEG is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_CYPRESS_CY7C63 is not set
> # CONFIG_USB_CYTHERM is not set
> # CONFIG_USB_IDMOUSE is not set
> # CONFIG_USB_FTDI_ELAN is not set
> # CONFIG_USB_APPLEDISPLAY is not set
> # CONFIG_APPLE_MFI_FASTCHARGE is not set
> # CONFIG_USB_SISUSBVGA is not set
> # CONFIG_USB_LD is not set
> # CONFIG_USB_TRANCEVIBRATOR is not set
> # CONFIG_USB_IOWARRIOR is not set
> # CONFIG_USB_TEST is not set
> # CONFIG_USB_EHSET_TEST_FIXTURE is not set
> # CONFIG_USB_ISIGHTFW is not set
> # CONFIG_USB_YUREX is not set
> # CONFIG_USB_EZUSB_FX2 is not set
> # CONFIG_USB_HUB_USB251XB is not set
> # CONFIG_USB_HSIC_USB3503 is not set
> # CONFIG_USB_HSIC_USB4604 is not set
> # CONFIG_USB_LINK_LAYER_TEST is not set
> # CONFIG_USB_CHAOSKEY is not set
> # CONFIG_USB_ATM is not set
> 
> #
> # USB Physical Layer drivers
> #
> # CONFIG_NOP_USB_XCEIV is not set
> # CONFIG_USB_GPIO_VBUS is not set
> # CONFIG_USB_ISP1301 is not set
> # end of USB Physical Layer drivers
> 
> # CONFIG_USB_GADGET is not set
> CONFIG_TYPEC=y
> # CONFIG_TYPEC_TCPM is not set
> CONFIG_TYPEC_UCSI=y
> # CONFIG_UCSI_CCG is not set
> CONFIG_UCSI_ACPI=y
> # CONFIG_UCSI_STM32G0 is not set
> # CONFIG_TYPEC_TPS6598X is not set
> # CONFIG_TYPEC_RT1719 is not set
> # CONFIG_TYPEC_STUSB160X is not set
> # CONFIG_TYPEC_WUSB3801 is not set
> 
> #
> # USB Type-C Multiplexer/DeMultiplexer Switch support
> #
> # CONFIG_TYPEC_MUX_FSA4480 is not set
> # CONFIG_TYPEC_MUX_PI3USB30532 is not set
> # end of USB Type-C Multiplexer/DeMultiplexer Switch support
> 
> #
> # USB Type-C Alternate Mode drivers
> #
> # CONFIG_TYPEC_DP_ALTMODE is not set
> # end of USB Type-C Alternate Mode drivers
> 
> # CONFIG_USB_ROLE_SWITCH is not set
> CONFIG_MMC=m
> CONFIG_MMC_BLOCK=m
> CONFIG_MMC_BLOCK_MINORS=8
> CONFIG_SDIO_UART=m
> # CONFIG_MMC_TEST is not set
> 
> #
> # MMC/SD/SDIO Host Controller Drivers
> #
> # CONFIG_MMC_DEBUG is not set
> CONFIG_MMC_SDHCI=m
> CONFIG_MMC_SDHCI_IO_ACCESSORS=y
> CONFIG_MMC_SDHCI_PCI=m
> CONFIG_MMC_RICOH_MMC=y
> CONFIG_MMC_SDHCI_ACPI=m
> CONFIG_MMC_SDHCI_PLTFM=m
> # CONFIG_MMC_SDHCI_F_SDH30 is not set
> # CONFIG_MMC_WBSD is not set
> # CONFIG_MMC_TIFM_SD is not set
> # CONFIG_MMC_SPI is not set
> # CONFIG_MMC_CB710 is not set
> # CONFIG_MMC_VIA_SDMMC is not set
> # CONFIG_MMC_VUB300 is not set
> # CONFIG_MMC_USHC is not set
> # CONFIG_MMC_USDHI6ROL0 is not set
> # CONFIG_MMC_REALTEK_PCI is not set
> CONFIG_MMC_CQHCI=m
> # CONFIG_MMC_HSQ is not set
> # CONFIG_MMC_TOSHIBA_PCI is not set
> # CONFIG_MMC_MTK is not set
> # CONFIG_MMC_SDHCI_XENON is not set
> # CONFIG_SCSI_UFSHCD is not set
> # CONFIG_MEMSTICK is not set
> CONFIG_NEW_LEDS=y
> CONFIG_LEDS_CLASS=y
> # CONFIG_LEDS_CLASS_FLASH is not set
> # CONFIG_LEDS_CLASS_MULTICOLOR is not set
> # CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
> 
> #
> # LED drivers
> #
> # CONFIG_LEDS_APU is not set
> CONFIG_LEDS_LM3530=m
> # CONFIG_LEDS_LM3532 is not set
> # CONFIG_LEDS_LM3642 is not set
> # CONFIG_LEDS_PCA9532 is not set
> # CONFIG_LEDS_GPIO is not set
> CONFIG_LEDS_LP3944=m
> # CONFIG_LEDS_LP3952 is not set
> # CONFIG_LEDS_LP50XX is not set
> # CONFIG_LEDS_PCA955X is not set
> # CONFIG_LEDS_PCA963X is not set
> # CONFIG_LEDS_DAC124S085 is not set
> # CONFIG_LEDS_PWM is not set
> # CONFIG_LEDS_BD2802 is not set
> CONFIG_LEDS_INTEL_SS4200=m
> CONFIG_LEDS_LT3593=m
> # CONFIG_LEDS_TCA6507 is not set
> # CONFIG_LEDS_TLC591XX is not set
> # CONFIG_LEDS_LM355x is not set
> # CONFIG_LEDS_IS31FL319X is not set
> 
> #
> # LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
> #
> CONFIG_LEDS_BLINKM=m
> CONFIG_LEDS_MLXCPLD=m
> # CONFIG_LEDS_MLXREG is not set
> # CONFIG_LEDS_USER is not set
> # CONFIG_LEDS_NIC78BX is not set
> # CONFIG_LEDS_TI_LMU_COMMON is not set
> 
> #
> # Flash and Torch LED drivers
> #
> 
> #
> # RGB LED drivers
> #
> 
> #
> # LED Triggers
> #
> CONFIG_LEDS_TRIGGERS=y
> CONFIG_LEDS_TRIGGER_TIMER=m
> CONFIG_LEDS_TRIGGER_ONESHOT=m
> # CONFIG_LEDS_TRIGGER_DISK is not set
> CONFIG_LEDS_TRIGGER_HEARTBEAT=m
> CONFIG_LEDS_TRIGGER_BACKLIGHT=m
> # CONFIG_LEDS_TRIGGER_CPU is not set
> # CONFIG_LEDS_TRIGGER_ACTIVITY is not set
> CONFIG_LEDS_TRIGGER_GPIO=m
> CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
> 
> #
> # iptables trigger is under Netfilter config (LED target)
> #
> CONFIG_LEDS_TRIGGER_TRANSIENT=m
> CONFIG_LEDS_TRIGGER_CAMERA=m
> # CONFIG_LEDS_TRIGGER_PANIC is not set
> # CONFIG_LEDS_TRIGGER_NETDEV is not set
> # CONFIG_LEDS_TRIGGER_PATTERN is not set
> CONFIG_LEDS_TRIGGER_AUDIO=m
> # CONFIG_LEDS_TRIGGER_TTY is not set
> 
> #
> # Simple LED drivers
> #
> # CONFIG_ACCESSIBILITY is not set
> # CONFIG_INFINIBAND is not set
> CONFIG_EDAC_ATOMIC_SCRUB=y
> CONFIG_EDAC_SUPPORT=y
> CONFIG_EDAC=y
> CONFIG_EDAC_LEGACY_SYSFS=y
> # CONFIG_EDAC_DEBUG is not set
> CONFIG_EDAC_GHES=y
> CONFIG_EDAC_E752X=m
> CONFIG_EDAC_I82975X=m
> CONFIG_EDAC_I3000=m
> CONFIG_EDAC_I3200=m
> CONFIG_EDAC_IE31200=m
> CONFIG_EDAC_X38=m
> CONFIG_EDAC_I5400=m
> CONFIG_EDAC_I7CORE=m
> CONFIG_EDAC_I5000=m
> CONFIG_EDAC_I5100=m
> CONFIG_EDAC_I7300=m
> CONFIG_EDAC_SBRIDGE=m
> CONFIG_EDAC_SKX=m
> # CONFIG_EDAC_I10NM is not set
> CONFIG_EDAC_PND2=m
> # CONFIG_EDAC_IGEN6 is not set
> CONFIG_RTC_LIB=y
> CONFIG_RTC_MC146818_LIB=y
> CONFIG_RTC_CLASS=y
> CONFIG_RTC_HCTOSYS=y
> CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
> # CONFIG_RTC_SYSTOHC is not set
> # CONFIG_RTC_DEBUG is not set
> CONFIG_RTC_NVMEM=y
> 
> #
> # RTC interfaces
> #
> CONFIG_RTC_INTF_SYSFS=y
> CONFIG_RTC_INTF_PROC=y
> CONFIG_RTC_INTF_DEV=y
> # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
> # CONFIG_RTC_DRV_TEST is not set
> 
> #
> # I2C RTC drivers
> #
> # CONFIG_RTC_DRV_ABB5ZES3 is not set
> # CONFIG_RTC_DRV_ABEOZ9 is not set
> # CONFIG_RTC_DRV_ABX80X is not set
> CONFIG_RTC_DRV_DS1307=m
> # CONFIG_RTC_DRV_DS1307_CENTURY is not set
> CONFIG_RTC_DRV_DS1374=m
> # CONFIG_RTC_DRV_DS1374_WDT is not set
> CONFIG_RTC_DRV_DS1672=m
> CONFIG_RTC_DRV_MAX6900=m
> CONFIG_RTC_DRV_RS5C372=m
> CONFIG_RTC_DRV_ISL1208=m
> CONFIG_RTC_DRV_ISL12022=m
> CONFIG_RTC_DRV_X1205=m
> CONFIG_RTC_DRV_PCF8523=m
> # CONFIG_RTC_DRV_PCF85063 is not set
> # CONFIG_RTC_DRV_PCF85363 is not set
> CONFIG_RTC_DRV_PCF8563=m
> CONFIG_RTC_DRV_PCF8583=m
> CONFIG_RTC_DRV_M41T80=m
> CONFIG_RTC_DRV_M41T80_WDT=y
> CONFIG_RTC_DRV_BQ32K=m
> # CONFIG_RTC_DRV_S35390A is not set
> CONFIG_RTC_DRV_FM3130=m
> # CONFIG_RTC_DRV_RX8010 is not set
> CONFIG_RTC_DRV_RX8581=m
> CONFIG_RTC_DRV_RX8025=m
> CONFIG_RTC_DRV_EM3027=m
> # CONFIG_RTC_DRV_RV3028 is not set
> # CONFIG_RTC_DRV_RV3032 is not set
> # CONFIG_RTC_DRV_RV8803 is not set
> # CONFIG_RTC_DRV_SD3078 is not set
> 
> #
> # SPI RTC drivers
> #
> # CONFIG_RTC_DRV_M41T93 is not set
> # CONFIG_RTC_DRV_M41T94 is not set
> # CONFIG_RTC_DRV_DS1302 is not set
> # CONFIG_RTC_DRV_DS1305 is not set
> # CONFIG_RTC_DRV_DS1343 is not set
> # CONFIG_RTC_DRV_DS1347 is not set
> # CONFIG_RTC_DRV_DS1390 is not set
> # CONFIG_RTC_DRV_MAX6916 is not set
> # CONFIG_RTC_DRV_R9701 is not set
> CONFIG_RTC_DRV_RX4581=m
> # CONFIG_RTC_DRV_RS5C348 is not set
> # CONFIG_RTC_DRV_MAX6902 is not set
> # CONFIG_RTC_DRV_PCF2123 is not set
> # CONFIG_RTC_DRV_MCP795 is not set
> CONFIG_RTC_I2C_AND_SPI=y
> 
> #
> # SPI and I2C RTC drivers
> #
> CONFIG_RTC_DRV_DS3232=m
> CONFIG_RTC_DRV_DS3232_HWMON=y
> # CONFIG_RTC_DRV_PCF2127 is not set
> CONFIG_RTC_DRV_RV3029C2=m
> # CONFIG_RTC_DRV_RV3029_HWMON is not set
> # CONFIG_RTC_DRV_RX6110 is not set
> 
> #
> # Platform RTC drivers
> #
> CONFIG_RTC_DRV_CMOS=y
> CONFIG_RTC_DRV_DS1286=m
> CONFIG_RTC_DRV_DS1511=m
> CONFIG_RTC_DRV_DS1553=m
> # CONFIG_RTC_DRV_DS1685_FAMILY is not set
> CONFIG_RTC_DRV_DS1742=m
> CONFIG_RTC_DRV_DS2404=m
> CONFIG_RTC_DRV_STK17TA8=m
> # CONFIG_RTC_DRV_M48T86 is not set
> CONFIG_RTC_DRV_M48T35=m
> CONFIG_RTC_DRV_M48T59=m
> CONFIG_RTC_DRV_MSM6242=m
> CONFIG_RTC_DRV_BQ4802=m
> CONFIG_RTC_DRV_RP5C01=m
> CONFIG_RTC_DRV_V3020=m
> 
> #
> # on-CPU RTC drivers
> #
> # CONFIG_RTC_DRV_FTRTC010 is not set
> 
> #
> # HID Sensor RTC drivers
> #
> # CONFIG_RTC_DRV_GOLDFISH is not set
> CONFIG_DMADEVICES=y
> # CONFIG_DMADEVICES_DEBUG is not set
> 
> #
> # DMA Devices
> #
> CONFIG_DMA_ENGINE=y
> CONFIG_DMA_VIRTUAL_CHANNELS=y
> CONFIG_DMA_ACPI=y
> # CONFIG_ALTERA_MSGDMA is not set
> CONFIG_INTEL_IDMA64=m
> # CONFIG_INTEL_IDXD is not set
> # CONFIG_INTEL_IDXD_COMPAT is not set
> CONFIG_INTEL_IOATDMA=m
> # CONFIG_PLX_DMA is not set
> # CONFIG_AMD_PTDMA is not set
> # CONFIG_QCOM_HIDMA_MGMT is not set
> # CONFIG_QCOM_HIDMA is not set
> CONFIG_DW_DMAC_CORE=y
> CONFIG_DW_DMAC=m
> CONFIG_DW_DMAC_PCI=y
> # CONFIG_DW_EDMA is not set
> # CONFIG_DW_EDMA_PCIE is not set
> CONFIG_HSU_DMA=y
> # CONFIG_SF_PDMA is not set
> # CONFIG_INTEL_LDMA is not set
> 
> #
> # DMA Clients
> #
> CONFIG_ASYNC_TX_DMA=y
> CONFIG_DMATEST=m
> CONFIG_DMA_ENGINE_RAID=y
> 
> #
> # DMABUF options
> #
> CONFIG_SYNC_FILE=y
> # CONFIG_SW_SYNC is not set
> # CONFIG_UDMABUF is not set
> # CONFIG_DMABUF_MOVE_NOTIFY is not set
> # CONFIG_DMABUF_DEBUG is not set
> # CONFIG_DMABUF_SELFTESTS is not set
> # CONFIG_DMABUF_HEAPS is not set
> # CONFIG_DMABUF_SYSFS_STATS is not set
> # end of DMABUF options
> 
> CONFIG_DCA=m
> # CONFIG_AUXDISPLAY is not set
> # CONFIG_PANEL is not set
> CONFIG_UIO=m
> CONFIG_UIO_CIF=m
> CONFIG_UIO_PDRV_GENIRQ=m
> # CONFIG_UIO_DMEM_GENIRQ is not set
> CONFIG_UIO_AEC=m
> CONFIG_UIO_SERCOS3=m
> CONFIG_UIO_PCI_GENERIC=m
> # CONFIG_UIO_NETX is not set
> # CONFIG_UIO_PRUSS is not set
> # CONFIG_UIO_MF624 is not set
> CONFIG_VFIO=m
> CONFIG_VFIO_IOMMU_TYPE1=m
> CONFIG_VFIO_VIRQFD=m
> CONFIG_VFIO_NOIOMMU=y
> CONFIG_VFIO_PCI_CORE=m
> CONFIG_VFIO_PCI_MMAP=y
> CONFIG_VFIO_PCI_INTX=y
> CONFIG_VFIO_PCI=m
> # CONFIG_VFIO_PCI_VGA is not set
> # CONFIG_VFIO_PCI_IGD is not set
> CONFIG_VFIO_MDEV=m
> CONFIG_IRQ_BYPASS_MANAGER=m
> # CONFIG_VIRT_DRIVERS is not set
> CONFIG_VIRTIO_ANCHOR=y
> CONFIG_VIRTIO=y
> CONFIG_VIRTIO_PCI_LIB=y
> CONFIG_VIRTIO_PCI_LIB_LEGACY=y
> CONFIG_VIRTIO_MENU=y
> CONFIG_VIRTIO_PCI=y
> CONFIG_VIRTIO_PCI_LEGACY=y
> # CONFIG_VIRTIO_PMEM is not set
> CONFIG_VIRTIO_BALLOON=m
> # CONFIG_VIRTIO_MEM is not set
> CONFIG_VIRTIO_INPUT=m
> # CONFIG_VIRTIO_MMIO is not set
> CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
> # CONFIG_VDPA is not set
> CONFIG_VHOST_IOTLB=m
> CONFIG_VHOST=m
> CONFIG_VHOST_MENU=y
> CONFIG_VHOST_NET=m
> # CONFIG_VHOST_SCSI is not set
> CONFIG_VHOST_VSOCK=m
> # CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
> 
> #
> # Microsoft Hyper-V guest support
> #
> # CONFIG_HYPERV is not set
> # end of Microsoft Hyper-V guest support
> 
> # CONFIG_GREYBUS is not set
> # CONFIG_COMEDI is not set
> # CONFIG_STAGING is not set
> # CONFIG_CHROME_PLATFORMS is not set
> CONFIG_MELLANOX_PLATFORM=y
> CONFIG_MLXREG_HOTPLUG=m
> # CONFIG_MLXREG_IO is not set
> # CONFIG_MLXREG_LC is not set
> # CONFIG_NVSW_SN2201 is not set
> CONFIG_SURFACE_PLATFORMS=y
> # CONFIG_SURFACE3_WMI is not set
> # CONFIG_SURFACE_3_POWER_OPREGION is not set
> # CONFIG_SURFACE_GPE is not set
> # CONFIG_SURFACE_HOTPLUG is not set
> # CONFIG_SURFACE_PRO3_BUTTON is not set
> CONFIG_X86_PLATFORM_DEVICES=y
> CONFIG_ACPI_WMI=m
> CONFIG_WMI_BMOF=m
> # CONFIG_HUAWEI_WMI is not set
> # CONFIG_UV_SYSFS is not set
> CONFIG_MXM_WMI=m
> # CONFIG_PEAQ_WMI is not set
> # CONFIG_NVIDIA_WMI_EC_BACKLIGHT is not set
> # CONFIG_XIAOMI_WMI is not set
> # CONFIG_GIGABYTE_WMI is not set
> # CONFIG_YOGABOOK_WMI is not set
> CONFIG_ACERHDF=m
> # CONFIG_ACER_WIRELESS is not set
> CONFIG_ACER_WMI=m
> # CONFIG_AMD_PMF is not set
> # CONFIG_AMD_PMC is not set
> # CONFIG_AMD_HSMP is not set
> # CONFIG_ADV_SWBUTTON is not set
> CONFIG_APPLE_GMUX=m
> CONFIG_ASUS_LAPTOP=m
> # CONFIG_ASUS_WIRELESS is not set
> CONFIG_ASUS_WMI=m
> CONFIG_ASUS_NB_WMI=m
> # CONFIG_ASUS_TF103C_DOCK is not set
> # CONFIG_MERAKI_MX100 is not set
> CONFIG_EEEPC_LAPTOP=m
> CONFIG_EEEPC_WMI=m
> # CONFIG_X86_PLATFORM_DRIVERS_DELL is not set
> CONFIG_AMILO_RFKILL=m
> CONFIG_FUJITSU_LAPTOP=m
> CONFIG_FUJITSU_TABLET=m
> # CONFIG_GPD_POCKET_FAN is not set
> CONFIG_HP_ACCEL=m
> # CONFIG_WIRELESS_HOTKEY is not set
> CONFIG_HP_WMI=m
> # CONFIG_IBM_RTL is not set
> CONFIG_IDEAPAD_LAPTOP=m
> CONFIG_SENSORS_HDAPS=m
> CONFIG_THINKPAD_ACPI=m
> # CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
> # CONFIG_THINKPAD_ACPI_DEBUG is not set
> # CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
> CONFIG_THINKPAD_ACPI_VIDEO=y
> CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
> # CONFIG_THINKPAD_LMI is not set
> # CONFIG_INTEL_ATOMISP2_PM is not set
> # CONFIG_INTEL_SAR_INT1092 is not set
> CONFIG_INTEL_PMC_CORE=m
> 
> #
> # Intel Speed Select Technology interface support
> #
> # CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
> # end of Intel Speed Select Technology interface support
> 
> CONFIG_INTEL_WMI=y
> # CONFIG_INTEL_WMI_SBL_FW_UPDATE is not set
> CONFIG_INTEL_WMI_THUNDERBOLT=m
> 
> #
> # Intel Uncore Frequency Control
> #
> # CONFIG_INTEL_UNCORE_FREQ_CONTROL is not set
> # end of Intel Uncore Frequency Control
> 
> CONFIG_INTEL_HID_EVENT=m
> CONFIG_INTEL_VBTN=m
> # CONFIG_INTEL_INT0002_VGPIO is not set
> CONFIG_INTEL_OAKTRAIL=m
> # CONFIG_INTEL_ISHTP_ECLITE is not set
> # CONFIG_INTEL_PUNIT_IPC is not set
> CONFIG_INTEL_RST=m
> # CONFIG_INTEL_SMARTCONNECT is not set
> CONFIG_INTEL_TURBO_MAX_3=y
> # CONFIG_INTEL_VSEC is not set
> CONFIG_MSI_LAPTOP=m
> CONFIG_MSI_WMI=m
> # CONFIG_PCENGINES_APU2 is not set
> # CONFIG_BARCO_P50_GPIO is not set
> CONFIG_SAMSUNG_LAPTOP=m
> CONFIG_SAMSUNG_Q10=m
> CONFIG_TOSHIBA_BT_RFKILL=m
> # CONFIG_TOSHIBA_HAPS is not set
> # CONFIG_TOSHIBA_WMI is not set
> CONFIG_ACPI_CMPC=m
> CONFIG_COMPAL_LAPTOP=m
> # CONFIG_LG_LAPTOP is not set
> CONFIG_PANASONIC_LAPTOP=m
> CONFIG_SONY_LAPTOP=m
> CONFIG_SONYPI_COMPAT=y
> # CONFIG_SYSTEM76_ACPI is not set
> CONFIG_TOPSTAR_LAPTOP=m
> # CONFIG_SERIAL_MULTI_INSTANTIATE is not set
> CONFIG_MLX_PLATFORM=m
> CONFIG_INTEL_IPS=m
> # CONFIG_INTEL_SCU_PCI is not set
> # CONFIG_INTEL_SCU_PLATFORM is not set
> # CONFIG_SIEMENS_SIMATIC_IPC is not set
> # CONFIG_WINMATE_FM07_KEYS is not set
> CONFIG_P2SB=y
> CONFIG_HAVE_CLK=y
> CONFIG_HAVE_CLK_PREPARE=y
> CONFIG_COMMON_CLK=y
> # CONFIG_LMK04832 is not set
> # CONFIG_COMMON_CLK_MAX9485 is not set
> # CONFIG_COMMON_CLK_SI5341 is not set
> # CONFIG_COMMON_CLK_SI5351 is not set
> # CONFIG_COMMON_CLK_SI544 is not set
> # CONFIG_COMMON_CLK_CDCE706 is not set
> # CONFIG_COMMON_CLK_CS2000_CP is not set
> # CONFIG_COMMON_CLK_PWM is not set
> # CONFIG_XILINX_VCU is not set
> CONFIG_HWSPINLOCK=y
> 
> #
> # Clock Source drivers
> #
> CONFIG_CLKEVT_I8253=y
> CONFIG_I8253_LOCK=y
> CONFIG_CLKBLD_I8253=y
> # end of Clock Source drivers
> 
> CONFIG_MAILBOX=y
> CONFIG_PCC=y
> # CONFIG_ALTERA_MBOX is not set
> CONFIG_IOMMU_IOVA=y
> CONFIG_IOASID=y
> CONFIG_IOMMU_API=y
> CONFIG_IOMMU_SUPPORT=y
> 
> #
> # Generic IOMMU Pagetable Support
> #
> # end of Generic IOMMU Pagetable Support
> 
> # CONFIG_IOMMU_DEBUGFS is not set
> # CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
> CONFIG_IOMMU_DEFAULT_DMA_LAZY=y
> # CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
> CONFIG_IOMMU_DMA=y
> CONFIG_IOMMU_SVA=y
> # CONFIG_AMD_IOMMU is not set
> CONFIG_DMAR_TABLE=y
> CONFIG_INTEL_IOMMU=y
> CONFIG_INTEL_IOMMU_SVM=y
> # CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
> CONFIG_INTEL_IOMMU_FLOPPY_WA=y
> CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON=y
> CONFIG_IRQ_REMAP=y
> # CONFIG_VIRTIO_IOMMU is not set
> 
> #
> # Remoteproc drivers
> #
> # CONFIG_REMOTEPROC is not set
> # end of Remoteproc drivers
> 
> #
> # Rpmsg drivers
> #
> # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
> # CONFIG_RPMSG_VIRTIO is not set
> # end of Rpmsg drivers
> 
> # CONFIG_SOUNDWIRE is not set
> 
> #
> # SOC (System On Chip) specific Drivers
> #
> 
> #
> # Amlogic SoC drivers
> #
> # end of Amlogic SoC drivers
> 
> #
> # Broadcom SoC drivers
> #
> # end of Broadcom SoC drivers
> 
> #
> # NXP/Freescale QorIQ SoC drivers
> #
> # end of NXP/Freescale QorIQ SoC drivers
> 
> #
> # fujitsu SoC drivers
> #
> # end of fujitsu SoC drivers
> 
> #
> # i.MX SoC drivers
> #
> # end of i.MX SoC drivers
> 
> #
> # Enable LiteX SoC Builder specific drivers
> #
> # end of Enable LiteX SoC Builder specific drivers
> 
> #
> # Qualcomm SoC drivers
> #
> # end of Qualcomm SoC drivers
> 
> # CONFIG_SOC_TI is not set
> 
> #
> # Xilinx SoC drivers
> #
> # end of Xilinx SoC drivers
> # end of SOC (System On Chip) specific Drivers
> 
> # CONFIG_PM_DEVFREQ is not set
> # CONFIG_EXTCON is not set
> # CONFIG_MEMORY is not set
> # CONFIG_IIO is not set
> CONFIG_NTB=m
> # CONFIG_NTB_MSI is not set
> # CONFIG_NTB_AMD is not set
> # CONFIG_NTB_IDT is not set
> # CONFIG_NTB_INTEL is not set
> # CONFIG_NTB_EPF is not set
> # CONFIG_NTB_SWITCHTEC is not set
> # CONFIG_NTB_PINGPONG is not set
> # CONFIG_NTB_TOOL is not set
> # CONFIG_NTB_PERF is not set
> # CONFIG_NTB_TRANSPORT is not set
> CONFIG_PWM=y
> CONFIG_PWM_SYSFS=y
> # CONFIG_PWM_DEBUG is not set
> # CONFIG_PWM_CLK is not set
> # CONFIG_PWM_DWC is not set
> CONFIG_PWM_LPSS=m
> CONFIG_PWM_LPSS_PCI=m
> CONFIG_PWM_LPSS_PLATFORM=m
> # CONFIG_PWM_PCA9685 is not set
> 
> #
> # IRQ chip support
> #
> # end of IRQ chip support
> 
> # CONFIG_IPACK_BUS is not set
> # CONFIG_RESET_CONTROLLER is not set
> 
> #
> # PHY Subsystem
> #
> # CONFIG_GENERIC_PHY is not set
> # CONFIG_USB_LGM_PHY is not set
> # CONFIG_PHY_CAN_TRANSCEIVER is not set
> 
> #
> # PHY drivers for Broadcom platforms
> #
> # CONFIG_BCM_KONA_USB2_PHY is not set
> # end of PHY drivers for Broadcom platforms
> 
> # CONFIG_PHY_PXA_28NM_HSIC is not set
> # CONFIG_PHY_PXA_28NM_USB2 is not set
> # CONFIG_PHY_INTEL_LGM_EMMC is not set
> # end of PHY Subsystem
> 
> CONFIG_POWERCAP=y
> CONFIG_INTEL_RAPL_CORE=m
> CONFIG_INTEL_RAPL=m
> # CONFIG_IDLE_INJECT is not set
> # CONFIG_MCB is not set
> 
> #
> # Performance monitor support
> #
> # end of Performance monitor support
> 
> CONFIG_RAS=y
> # CONFIG_RAS_CEC is not set
> # CONFIG_USB4 is not set
> 
> #
> # Android
> #
> # CONFIG_ANDROID_BINDER_IPC is not set
> # end of Android
> 
> CONFIG_LIBNVDIMM=m
> CONFIG_BLK_DEV_PMEM=m
> CONFIG_ND_CLAIM=y
> CONFIG_ND_BTT=m
> CONFIG_BTT=y
> CONFIG_ND_PFN=m
> CONFIG_NVDIMM_PFN=y
> CONFIG_NVDIMM_DAX=y
> CONFIG_NVDIMM_KEYS=y
> CONFIG_DAX=y
> CONFIG_DEV_DAX=m
> CONFIG_DEV_DAX_PMEM=m
> CONFIG_DEV_DAX_KMEM=m
> CONFIG_NVMEM=y
> CONFIG_NVMEM_SYSFS=y
> # CONFIG_NVMEM_RMEM is not set
> 
> #
> # HW tracing support
> #
> CONFIG_STM=m
> # CONFIG_STM_PROTO_BASIC is not set
> # CONFIG_STM_PROTO_SYS_T is not set
> CONFIG_STM_DUMMY=m
> CONFIG_STM_SOURCE_CONSOLE=m
> CONFIG_STM_SOURCE_HEARTBEAT=m
> CONFIG_STM_SOURCE_FTRACE=m
> CONFIG_INTEL_TH=m
> CONFIG_INTEL_TH_PCI=m
> CONFIG_INTEL_TH_ACPI=m
> CONFIG_INTEL_TH_GTH=m
> CONFIG_INTEL_TH_STH=m
> CONFIG_INTEL_TH_MSU=m
> CONFIG_INTEL_TH_PTI=m
> # CONFIG_INTEL_TH_DEBUG is not set
> # end of HW tracing support
> 
> # CONFIG_FPGA is not set
> # CONFIG_TEE is not set
> # CONFIG_SIOX is not set
> # CONFIG_SLIMBUS is not set
> # CONFIG_INTERCONNECT is not set
> # CONFIG_COUNTER is not set
> # CONFIG_MOST is not set
> # CONFIG_PECI is not set
> # CONFIG_HTE is not set
> # end of Device Drivers
> 
> #
> # File systems
> #
> CONFIG_DCACHE_WORD_ACCESS=y
> # CONFIG_VALIDATE_FS_PARSER is not set
> CONFIG_FS_IOMAP=y
> CONFIG_EXT2_FS=m
> # CONFIG_EXT2_FS_XATTR is not set
> # CONFIG_EXT3_FS is not set
> CONFIG_EXT4_FS=y
> CONFIG_EXT4_FS_POSIX_ACL=y
> CONFIG_EXT4_FS_SECURITY=y
> # CONFIG_EXT4_DEBUG is not set
> CONFIG_JBD2=y
> # CONFIG_JBD2_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> CONFIG_XFS_FS=m
> CONFIG_XFS_SUPPORT_V4=y
> CONFIG_XFS_QUOTA=y
> CONFIG_XFS_POSIX_ACL=y
> CONFIG_XFS_RT=y
> CONFIG_XFS_ONLINE_SCRUB=y
> # CONFIG_XFS_ONLINE_REPAIR is not set
> CONFIG_XFS_DEBUG=y
> CONFIG_XFS_ASSERT_FATAL=y
> CONFIG_GFS2_FS=m
> CONFIG_GFS2_FS_LOCKING_DLM=y
> CONFIG_OCFS2_FS=m
> CONFIG_OCFS2_FS_O2CB=m
> CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
> CONFIG_OCFS2_FS_STATS=y
> CONFIG_OCFS2_DEBUG_MASKLOG=y
> # CONFIG_OCFS2_DEBUG_FS is not set
> CONFIG_BTRFS_FS=m
> CONFIG_BTRFS_FS_POSIX_ACL=y
> # CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
> # CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
> # CONFIG_BTRFS_DEBUG is not set
> # CONFIG_BTRFS_ASSERT is not set
> # CONFIG_BTRFS_FS_REF_VERIFY is not set
> # CONFIG_NILFS2_FS is not set
> CONFIG_F2FS_FS=m
> CONFIG_F2FS_STAT_FS=y
> CONFIG_F2FS_FS_XATTR=y
> CONFIG_F2FS_FS_POSIX_ACL=y
> # CONFIG_F2FS_FS_SECURITY is not set
> # CONFIG_F2FS_CHECK_FS is not set
> # CONFIG_F2FS_FAULT_INJECTION is not set
> # CONFIG_F2FS_FS_COMPRESSION is not set
> CONFIG_F2FS_IOSTAT=y
> # CONFIG_F2FS_UNFAIR_RWSEM is not set
> CONFIG_FS_DAX=y
> CONFIG_FS_DAX_PMD=y
> CONFIG_FS_POSIX_ACL=y
> CONFIG_EXPORTFS=y
> CONFIG_EXPORTFS_BLOCK_OPS=y
> CONFIG_FILE_LOCKING=y
> CONFIG_FS_ENCRYPTION=y
> CONFIG_FS_ENCRYPTION_ALGS=y
> # CONFIG_FS_VERITY is not set
> CONFIG_FSNOTIFY=y
> CONFIG_DNOTIFY=y
> CONFIG_INOTIFY_USER=y
> CONFIG_FANOTIFY=y
> CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
> CONFIG_QUOTA=y
> CONFIG_QUOTA_NETLINK_INTERFACE=y
> CONFIG_PRINT_QUOTA_WARNING=y
> # CONFIG_QUOTA_DEBUG is not set
> CONFIG_QUOTA_TREE=y
> # CONFIG_QFMT_V1 is not set
> CONFIG_QFMT_V2=y
> CONFIG_QUOTACTL=y
> CONFIG_AUTOFS4_FS=y
> CONFIG_AUTOFS_FS=y
> CONFIG_FUSE_FS=m
> CONFIG_CUSE=m
> # CONFIG_VIRTIO_FS is not set
> CONFIG_OVERLAY_FS=m
> # CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
> # CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
> # CONFIG_OVERLAY_FS_INDEX is not set
> # CONFIG_OVERLAY_FS_XINO_AUTO is not set
> # CONFIG_OVERLAY_FS_METACOPY is not set
> 
> #
> # Caches
> #
> CONFIG_NETFS_SUPPORT=m
> CONFIG_NETFS_STATS=y
> CONFIG_FSCACHE=m
> CONFIG_FSCACHE_STATS=y
> # CONFIG_FSCACHE_DEBUG is not set
> CONFIG_CACHEFILES=m
> # CONFIG_CACHEFILES_DEBUG is not set
> # CONFIG_CACHEFILES_ERROR_INJECTION is not set
> # CONFIG_CACHEFILES_ONDEMAND is not set
> # end of Caches
> 
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=m
> CONFIG_JOLIET=y
> CONFIG_ZISOFS=y
> CONFIG_UDF_FS=m
> # end of CD-ROM/DVD Filesystems
> 
> #
> # DOS/FAT/EXFAT/NT Filesystems
> #
> CONFIG_FAT_FS=m
> CONFIG_MSDOS_FS=m
> CONFIG_VFAT_FS=m
> CONFIG_FAT_DEFAULT_CODEPAGE=437
> CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
> # CONFIG_FAT_DEFAULT_UTF8 is not set
> # CONFIG_EXFAT_FS is not set
> # CONFIG_NTFS_FS is not set
> # CONFIG_NTFS3_FS is not set
> # end of DOS/FAT/EXFAT/NT Filesystems
> 
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_PROC_VMCORE=y
> CONFIG_PROC_VMCORE_DEVICE_DUMP=y
> CONFIG_PROC_SYSCTL=y
> CONFIG_PROC_PAGE_MONITOR=y
> CONFIG_PROC_CHILDREN=y
> CONFIG_PROC_PID_ARCH_STATUS=y
> CONFIG_KERNFS=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> CONFIG_TMPFS_POSIX_ACL=y
> CONFIG_TMPFS_XATTR=y
> # CONFIG_TMPFS_INODE64 is not set
> CONFIG_HUGETLBFS=y
> CONFIG_HUGETLB_PAGE=y
> CONFIG_ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
> CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
> # CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON is not set
> CONFIG_MEMFD_CREATE=y
> CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
> CONFIG_CONFIGFS_FS=y
> CONFIG_EFIVAR_FS=y
> # end of Pseudo filesystems
> 
> CONFIG_MISC_FILESYSTEMS=y
> # CONFIG_ORANGEFS_FS is not set
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_ECRYPT_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> CONFIG_CRAMFS=m
> CONFIG_CRAMFS_BLOCKDEV=y
> CONFIG_SQUASHFS=m
> # CONFIG_SQUASHFS_FILE_CACHE is not set
> CONFIG_SQUASHFS_FILE_DIRECT=y
> # CONFIG_SQUASHFS_DECOMP_SINGLE is not set
> # CONFIG_SQUASHFS_DECOMP_MULTI is not set
> CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
> CONFIG_SQUASHFS_XATTR=y
> CONFIG_SQUASHFS_ZLIB=y
> # CONFIG_SQUASHFS_LZ4 is not set
> CONFIG_SQUASHFS_LZO=y
> CONFIG_SQUASHFS_XZ=y
> # CONFIG_SQUASHFS_ZSTD is not set
> # CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
> # CONFIG_SQUASHFS_EMBEDDED is not set
> CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
> # CONFIG_VXFS_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_OMFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_QNX6FS_FS is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_PSTORE=y
> CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
> CONFIG_PSTORE_DEFLATE_COMPRESS=y
> # CONFIG_PSTORE_LZO_COMPRESS is not set
> # CONFIG_PSTORE_LZ4_COMPRESS is not set
> # CONFIG_PSTORE_LZ4HC_COMPRESS is not set
> # CONFIG_PSTORE_842_COMPRESS is not set
> # CONFIG_PSTORE_ZSTD_COMPRESS is not set
> CONFIG_PSTORE_COMPRESS=y
> CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
> CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
> # CONFIG_PSTORE_CONSOLE is not set
> # CONFIG_PSTORE_PMSG is not set
> # CONFIG_PSTORE_FTRACE is not set
> CONFIG_PSTORE_RAM=m
> # CONFIG_PSTORE_BLK is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> # CONFIG_EROFS_FS is not set
> CONFIG_NETWORK_FILESYSTEMS=y
> CONFIG_NFS_FS=y
> # CONFIG_NFS_V2 is not set
> CONFIG_NFS_V3=y
> CONFIG_NFS_V3_ACL=y
> CONFIG_NFS_V4=m
> # CONFIG_NFS_SWAP is not set
> CONFIG_NFS_V4_1=y
> CONFIG_NFS_V4_2=y
> CONFIG_PNFS_FILE_LAYOUT=m
> CONFIG_PNFS_BLOCK=m
> CONFIG_PNFS_FLEXFILE_LAYOUT=m
> CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
> # CONFIG_NFS_V4_1_MIGRATION is not set
> CONFIG_NFS_V4_SECURITY_LABEL=y
> CONFIG_ROOT_NFS=y
> # CONFIG_NFS_USE_LEGACY_DNS is not set
> CONFIG_NFS_USE_KERNEL_DNS=y
> CONFIG_NFS_DEBUG=y
> CONFIG_NFS_DISABLE_UDP_SUPPORT=y
> # CONFIG_NFS_V4_2_READ_PLUS is not set
> CONFIG_NFSD=m
> CONFIG_NFSD_V2_ACL=y
> CONFIG_NFSD_V3_ACL=y
> CONFIG_NFSD_V4=y
> CONFIG_NFSD_PNFS=y
> # CONFIG_NFSD_BLOCKLAYOUT is not set
> CONFIG_NFSD_SCSILAYOUT=y
> # CONFIG_NFSD_FLEXFILELAYOUT is not set
> # CONFIG_NFSD_V4_2_INTER_SSC is not set
> CONFIG_NFSD_V4_SECURITY_LABEL=y
> CONFIG_GRACE_PERIOD=y
> CONFIG_LOCKD=y
> CONFIG_LOCKD_V4=y
> CONFIG_NFS_ACL_SUPPORT=y
> CONFIG_NFS_COMMON=y
> CONFIG_NFS_V4_2_SSC_HELPER=y
> CONFIG_SUNRPC=y
> CONFIG_SUNRPC_GSS=m
> CONFIG_SUNRPC_BACKCHANNEL=y
> CONFIG_RPCSEC_GSS_KRB5=m
> # CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set
> CONFIG_SUNRPC_DEBUG=y
> CONFIG_CEPH_FS=m
> # CONFIG_CEPH_FSCACHE is not set
> CONFIG_CEPH_FS_POSIX_ACL=y
> # CONFIG_CEPH_FS_SECURITY_LABEL is not set
> CONFIG_CIFS=m
> CONFIG_CIFS_STATS2=y
> CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
> CONFIG_CIFS_UPCALL=y
> CONFIG_CIFS_XATTR=y
> CONFIG_CIFS_POSIX=y
> CONFIG_CIFS_DEBUG=y
> # CONFIG_CIFS_DEBUG2 is not set
> # CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
> CONFIG_CIFS_DFS_UPCALL=y
> # CONFIG_CIFS_SWN_UPCALL is not set
> # CONFIG_CIFS_FSCACHE is not set
> # CONFIG_SMB_SERVER is not set
> CONFIG_SMBFS_COMMON=m
> # CONFIG_CODA_FS is not set
> # CONFIG_AFS_FS is not set
> # CONFIG_9P_FS is not set
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="utf8"
> CONFIG_NLS_CODEPAGE_437=y
> CONFIG_NLS_CODEPAGE_737=m
> CONFIG_NLS_CODEPAGE_775=m
> CONFIG_NLS_CODEPAGE_850=m
> CONFIG_NLS_CODEPAGE_852=m
> CONFIG_NLS_CODEPAGE_855=m
> CONFIG_NLS_CODEPAGE_857=m
> CONFIG_NLS_CODEPAGE_860=m
> CONFIG_NLS_CODEPAGE_861=m
> CONFIG_NLS_CODEPAGE_862=m
> CONFIG_NLS_CODEPAGE_863=m
> CONFIG_NLS_CODEPAGE_864=m
> CONFIG_NLS_CODEPAGE_865=m
> CONFIG_NLS_CODEPAGE_866=m
> CONFIG_NLS_CODEPAGE_869=m
> CONFIG_NLS_CODEPAGE_936=m
> CONFIG_NLS_CODEPAGE_950=m
> CONFIG_NLS_CODEPAGE_932=m
> CONFIG_NLS_CODEPAGE_949=m
> CONFIG_NLS_CODEPAGE_874=m
> CONFIG_NLS_ISO8859_8=m
> CONFIG_NLS_CODEPAGE_1250=m
> CONFIG_NLS_CODEPAGE_1251=m
> CONFIG_NLS_ASCII=y
> CONFIG_NLS_ISO8859_1=m
> CONFIG_NLS_ISO8859_2=m
> CONFIG_NLS_ISO8859_3=m
> CONFIG_NLS_ISO8859_4=m
> CONFIG_NLS_ISO8859_5=m
> CONFIG_NLS_ISO8859_6=m
> CONFIG_NLS_ISO8859_7=m
> CONFIG_NLS_ISO8859_9=m
> CONFIG_NLS_ISO8859_13=m
> CONFIG_NLS_ISO8859_14=m
> CONFIG_NLS_ISO8859_15=m
> CONFIG_NLS_KOI8_R=m
> CONFIG_NLS_KOI8_U=m
> CONFIG_NLS_MAC_ROMAN=m
> CONFIG_NLS_MAC_CELTIC=m
> CONFIG_NLS_MAC_CENTEURO=m
> CONFIG_NLS_MAC_CROATIAN=m
> CONFIG_NLS_MAC_CYRILLIC=m
> CONFIG_NLS_MAC_GAELIC=m
> CONFIG_NLS_MAC_GREEK=m
> CONFIG_NLS_MAC_ICELAND=m
> CONFIG_NLS_MAC_INUIT=m
> CONFIG_NLS_MAC_ROMANIAN=m
> CONFIG_NLS_MAC_TURKISH=m
> CONFIG_NLS_UTF8=m
> CONFIG_DLM=m
> # CONFIG_DLM_DEPRECATED_API is not set
> CONFIG_DLM_DEBUG=y
> # CONFIG_UNICODE is not set
> CONFIG_IO_WQ=y
> # end of File systems
> 
> #
> # Security options
> #
> CONFIG_KEYS=y
> # CONFIG_KEYS_REQUEST_CACHE is not set
> CONFIG_PERSISTENT_KEYRINGS=y
> CONFIG_TRUSTED_KEYS=y
> CONFIG_TRUSTED_KEYS_TPM=y
> CONFIG_ENCRYPTED_KEYS=y
> # CONFIG_USER_DECRYPTED_DATA is not set
> # CONFIG_KEY_DH_OPERATIONS is not set
> # CONFIG_SECURITY_DMESG_RESTRICT is not set
> CONFIG_SECURITY=y
> CONFIG_SECURITYFS=y
> CONFIG_SECURITY_NETWORK=y
> CONFIG_SECURITY_NETWORK_XFRM=y
> CONFIG_SECURITY_PATH=y
> CONFIG_INTEL_TXT=y
> CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
> CONFIG_HARDENED_USERCOPY=y
> CONFIG_FORTIFY_SOURCE=y
> # CONFIG_STATIC_USERMODEHELPER is not set
> # CONFIG_SECURITY_SELINUX is not set
> # CONFIG_SECURITY_SMACK is not set
> # CONFIG_SECURITY_TOMOYO is not set
> CONFIG_SECURITY_APPARMOR=y
> # CONFIG_SECURITY_APPARMOR_DEBUG is not set
> CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y
> CONFIG_SECURITY_APPARMOR_HASH=y
> CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
> CONFIG_SECURITY_APPARMOR_EXPORT_BINARY=y
> CONFIG_SECURITY_APPARMOR_PARANOID_LOAD=y
> # CONFIG_SECURITY_LOADPIN is not set
> CONFIG_SECURITY_YAMA=y
> # CONFIG_SECURITY_SAFESETID is not set
> # CONFIG_SECURITY_LOCKDOWN_LSM is not set
> # CONFIG_SECURITY_LANDLOCK is not set
> CONFIG_INTEGRITY=y
> CONFIG_INTEGRITY_SIGNATURE=y
> CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
> CONFIG_INTEGRITY_TRUSTED_KEYRING=y
> # CONFIG_INTEGRITY_PLATFORM_KEYRING is not set
> CONFIG_INTEGRITY_AUDIT=y
> # CONFIG_IMA is not set
> # CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
> # CONFIG_EVM is not set
> CONFIG_DEFAULT_SECURITY_APPARMOR=y
> # CONFIG_DEFAULT_SECURITY_DAC is not set
> CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,apparmor,selinux,smack,tomoyo,bpf"
> 
> #
> # Kernel hardening options
> #
> 
> #
> # Memory initialization
> #
> CONFIG_INIT_STACK_NONE=y
> # CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
> # CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
> # CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
> # CONFIG_GCC_PLUGIN_STACKLEAK is not set
> # CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
> # CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
> CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
> # CONFIG_ZERO_CALL_USED_REGS is not set
> # end of Memory initialization
> 
> CONFIG_RANDSTRUCT_NONE=y
> # CONFIG_RANDSTRUCT_FULL is not set
> # CONFIG_RANDSTRUCT_PERFORMANCE is not set
> # end of Kernel hardening options
> # end of Security options
> 
> CONFIG_XOR_BLOCKS=m
> CONFIG_ASYNC_CORE=m
> CONFIG_ASYNC_MEMCPY=m
> CONFIG_ASYNC_XOR=m
> CONFIG_ASYNC_PQ=m
> CONFIG_ASYNC_RAID6_RECOV=m
> CONFIG_CRYPTO=y
> 
> #
> # Crypto core or helper
> #
> CONFIG_CRYPTO_ALGAPI=y
> CONFIG_CRYPTO_ALGAPI2=y
> CONFIG_CRYPTO_AEAD=y
> CONFIG_CRYPTO_AEAD2=y
> CONFIG_CRYPTO_SKCIPHER=y
> CONFIG_CRYPTO_SKCIPHER2=y
> CONFIG_CRYPTO_HASH=y
> CONFIG_CRYPTO_HASH2=y
> CONFIG_CRYPTO_RNG=y
> CONFIG_CRYPTO_RNG2=y
> CONFIG_CRYPTO_RNG_DEFAULT=y
> CONFIG_CRYPTO_AKCIPHER2=y
> CONFIG_CRYPTO_AKCIPHER=y
> CONFIG_CRYPTO_KPP2=y
> CONFIG_CRYPTO_KPP=m
> CONFIG_CRYPTO_ACOMP2=y
> CONFIG_CRYPTO_MANAGER=y
> CONFIG_CRYPTO_MANAGER2=y
> CONFIG_CRYPTO_USER=m
> CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
> CONFIG_CRYPTO_GF128MUL=y
> CONFIG_CRYPTO_NULL=y
> CONFIG_CRYPTO_NULL2=y
> CONFIG_CRYPTO_PCRYPT=m
> CONFIG_CRYPTO_CRYPTD=y
> CONFIG_CRYPTO_AUTHENC=m
> # CONFIG_CRYPTO_TEST is not set
> CONFIG_CRYPTO_SIMD=y
> # end of Crypto core or helper
> 
> #
> # Public-key cryptography
> #
> CONFIG_CRYPTO_RSA=y
> CONFIG_CRYPTO_DH=m
> # CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
> CONFIG_CRYPTO_ECC=m
> CONFIG_CRYPTO_ECDH=m
> # CONFIG_CRYPTO_ECDSA is not set
> # CONFIG_CRYPTO_ECRDSA is not set
> # CONFIG_CRYPTO_SM2 is not set
> # CONFIG_CRYPTO_CURVE25519 is not set
> # end of Public-key cryptography
> 
> #
> # Block ciphers
> #
> CONFIG_CRYPTO_AES=y
> # CONFIG_CRYPTO_AES_TI is not set
> CONFIG_CRYPTO_ANUBIS=m
> # CONFIG_CRYPTO_ARIA is not set
> CONFIG_CRYPTO_BLOWFISH=m
> CONFIG_CRYPTO_BLOWFISH_COMMON=m
> CONFIG_CRYPTO_CAMELLIA=m
> CONFIG_CRYPTO_CAST_COMMON=m
> CONFIG_CRYPTO_CAST5=m
> CONFIG_CRYPTO_CAST6=m
> CONFIG_CRYPTO_DES=m
> CONFIG_CRYPTO_FCRYPT=m
> CONFIG_CRYPTO_KHAZAD=m
> CONFIG_CRYPTO_SEED=m
> CONFIG_CRYPTO_SERPENT=m
> # CONFIG_CRYPTO_SM4_GENERIC is not set
> CONFIG_CRYPTO_TEA=m
> CONFIG_CRYPTO_TWOFISH=m
> CONFIG_CRYPTO_TWOFISH_COMMON=m
> # end of Block ciphers
> 
> #
> # Length-preserving ciphers and modes
> #
> # CONFIG_CRYPTO_ADIANTUM is not set
> CONFIG_CRYPTO_ARC4=m
> CONFIG_CRYPTO_CHACHA20=m
> CONFIG_CRYPTO_CBC=y
> CONFIG_CRYPTO_CFB=y
> CONFIG_CRYPTO_CTR=y
> CONFIG_CRYPTO_CTS=m
> CONFIG_CRYPTO_ECB=y
> # CONFIG_CRYPTO_HCTR2 is not set
> # CONFIG_CRYPTO_KEYWRAP is not set
> CONFIG_CRYPTO_LRW=m
> CONFIG_CRYPTO_OFB=m
> CONFIG_CRYPTO_PCBC=m
> CONFIG_CRYPTO_XTS=m
> # end of Length-preserving ciphers and modes
> 
> #
> # AEAD (authenticated encryption with associated data) ciphers
> #
> # CONFIG_CRYPTO_AEGIS128 is not set
> # CONFIG_CRYPTO_CHACHA20POLY1305 is not set
> CONFIG_CRYPTO_CCM=m
> CONFIG_CRYPTO_GCM=y
> CONFIG_CRYPTO_SEQIV=y
> CONFIG_CRYPTO_ECHAINIV=m
> CONFIG_CRYPTO_ESSIV=m
> # end of AEAD (authenticated encryption with associated data) ciphers
> 
> #
> # Hashes, digests, and MACs
> #
> CONFIG_CRYPTO_BLAKE2B=m
> CONFIG_CRYPTO_CMAC=m
> CONFIG_CRYPTO_GHASH=y
> CONFIG_CRYPTO_HMAC=y
> CONFIG_CRYPTO_MD4=m
> CONFIG_CRYPTO_MD5=y
> CONFIG_CRYPTO_MICHAEL_MIC=m
> # CONFIG_CRYPTO_POLY1305 is not set
> CONFIG_CRYPTO_RMD160=m
> CONFIG_CRYPTO_SHA1=y
> CONFIG_CRYPTO_SHA256=y
> CONFIG_CRYPTO_SHA512=y
> CONFIG_CRYPTO_SHA3=m
> # CONFIG_CRYPTO_SM3_GENERIC is not set
> # CONFIG_CRYPTO_STREEBOG is not set
> CONFIG_CRYPTO_VMAC=m
> CONFIG_CRYPTO_WP512=m
> CONFIG_CRYPTO_XCBC=m
> CONFIG_CRYPTO_XXHASH=m
> # end of Hashes, digests, and MACs
> 
> #
> # CRCs (cyclic redundancy checks)
> #
> CONFIG_CRYPTO_CRC32C=y
> CONFIG_CRYPTO_CRC32=m
> CONFIG_CRYPTO_CRCT10DIF=y
> CONFIG_CRYPTO_CRC64_ROCKSOFT=m
> # end of CRCs (cyclic redundancy checks)
> 
> #
> # Compression
> #
> CONFIG_CRYPTO_DEFLATE=y
> CONFIG_CRYPTO_LZO=y
> # CONFIG_CRYPTO_842 is not set
> # CONFIG_CRYPTO_LZ4 is not set
> # CONFIG_CRYPTO_LZ4HC is not set
> # CONFIG_CRYPTO_ZSTD is not set
> # end of Compression
> 
> #
> # Random number generation
> #
> CONFIG_CRYPTO_ANSI_CPRNG=m
> CONFIG_CRYPTO_DRBG_MENU=y
> CONFIG_CRYPTO_DRBG_HMAC=y
> CONFIG_CRYPTO_DRBG_HASH=y
> CONFIG_CRYPTO_DRBG_CTR=y
> CONFIG_CRYPTO_DRBG=y
> CONFIG_CRYPTO_JITTERENTROPY=y
> # end of Random number generation
> 
> #
> # Userspace interface
> #
> CONFIG_CRYPTO_USER_API=y
> CONFIG_CRYPTO_USER_API_HASH=y
> CONFIG_CRYPTO_USER_API_SKCIPHER=y
> CONFIG_CRYPTO_USER_API_RNG=y
> # CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
> CONFIG_CRYPTO_USER_API_AEAD=y
> CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
> # CONFIG_CRYPTO_STATS is not set
> # end of Userspace interface
> 
> CONFIG_CRYPTO_HASH_INFO=y
> 
> #
> # Accelerated Cryptographic Algorithms for CPU (x86)
> #
> # CONFIG_CRYPTO_CURVE25519_X86 is not set
> CONFIG_CRYPTO_AES_NI_INTEL=y
> CONFIG_CRYPTO_BLOWFISH_X86_64=m
> CONFIG_CRYPTO_CAMELLIA_X86_64=m
> CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
> CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
> CONFIG_CRYPTO_CAST5_AVX_X86_64=m
> CONFIG_CRYPTO_CAST6_AVX_X86_64=m
> # CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
> CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
> CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
> CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
> # CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64 is not set
> # CONFIG_CRYPTO_SM4_AESNI_AVX2_X86_64 is not set
> CONFIG_CRYPTO_TWOFISH_X86_64=m
> CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
> CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
> # CONFIG_CRYPTO_ARIA_AESNI_AVX_X86_64 is not set
> CONFIG_CRYPTO_CHACHA20_X86_64=m
> # CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
> # CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
> # CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
> # CONFIG_CRYPTO_BLAKE2S_X86 is not set
> # CONFIG_CRYPTO_POLYVAL_CLMUL_NI is not set
> # CONFIG_CRYPTO_POLY1305_X86_64 is not set
> CONFIG_CRYPTO_SHA1_SSSE3=y
> CONFIG_CRYPTO_SHA256_SSSE3=y
> CONFIG_CRYPTO_SHA512_SSSE3=m
> # CONFIG_CRYPTO_SM3_AVX_X86_64 is not set
> CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
> CONFIG_CRYPTO_CRC32C_INTEL=m
> CONFIG_CRYPTO_CRC32_PCLMUL=m
> CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
> # end of Accelerated Cryptographic Algorithms for CPU (x86)
> 
> CONFIG_CRYPTO_HW=y
> CONFIG_CRYPTO_DEV_PADLOCK=m
> CONFIG_CRYPTO_DEV_PADLOCK_AES=m
> CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
> # CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
> # CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
> CONFIG_CRYPTO_DEV_CCP=y
> CONFIG_CRYPTO_DEV_CCP_DD=m
> CONFIG_CRYPTO_DEV_SP_CCP=y
> CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
> CONFIG_CRYPTO_DEV_SP_PSP=y
> # CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
> CONFIG_CRYPTO_DEV_QAT=m
> CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
> CONFIG_CRYPTO_DEV_QAT_C3XXX=m
> CONFIG_CRYPTO_DEV_QAT_C62X=m
> # CONFIG_CRYPTO_DEV_QAT_4XXX is not set
> CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
> CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
> CONFIG_CRYPTO_DEV_QAT_C62XVF=m
> CONFIG_CRYPTO_DEV_NITROX=m
> CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m
> # CONFIG_CRYPTO_DEV_VIRTIO is not set
> # CONFIG_CRYPTO_DEV_SAFEXCEL is not set
> # CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
> CONFIG_ASYMMETRIC_KEY_TYPE=y
> CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
> CONFIG_X509_CERTIFICATE_PARSER=y
> # CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
> CONFIG_PKCS7_MESSAGE_PARSER=y
> # CONFIG_PKCS7_TEST_KEY is not set
> CONFIG_SIGNED_PE_FILE_VERIFICATION=y
> # CONFIG_FIPS_SIGNATURE_SELFTEST is not set
> 
> #
> # Certificates for signature checking
> #
> CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
> CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
> # CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set
> CONFIG_SYSTEM_TRUSTED_KEYRING=y
> CONFIG_SYSTEM_TRUSTED_KEYS=""
> # CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
> # CONFIG_SECONDARY_TRUSTED_KEYRING is not set
> CONFIG_SYSTEM_BLACKLIST_KEYRING=y
> CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
> # CONFIG_SYSTEM_REVOCATION_LIST is not set
> # CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE is not set
> # end of Certificates for signature checking
> 
> CONFIG_BINARY_PRINTF=y
> 
> #
> # Library routines
> #
> CONFIG_RAID6_PQ=m
> CONFIG_RAID6_PQ_BENCHMARK=y
> # CONFIG_PACKING is not set
> CONFIG_BITREVERSE=y
> CONFIG_GENERIC_STRNCPY_FROM_USER=y
> CONFIG_GENERIC_STRNLEN_USER=y
> CONFIG_GENERIC_NET_UTILS=y
> CONFIG_CORDIC=m
> # CONFIG_PRIME_NUMBERS is not set
> CONFIG_RATIONAL=y
> CONFIG_GENERIC_PCI_IOMAP=y
> CONFIG_GENERIC_IOMAP=y
> CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
> CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
> CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
> 
> #
> # Crypto library routines
> #
> CONFIG_CRYPTO_LIB_UTILS=y
> CONFIG_CRYPTO_LIB_AES=y
> CONFIG_CRYPTO_LIB_ARC4=m
> CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
> CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m
> CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
> # CONFIG_CRYPTO_LIB_CHACHA is not set
> # CONFIG_CRYPTO_LIB_CURVE25519 is not set
> CONFIG_CRYPTO_LIB_DES=m
> CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
> # CONFIG_CRYPTO_LIB_POLY1305 is not set
> # CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
> CONFIG_CRYPTO_LIB_SHA1=y
> CONFIG_CRYPTO_LIB_SHA256=y
> # end of Crypto library routines
> 
> CONFIG_CRC_CCITT=y
> CONFIG_CRC16=y
> CONFIG_CRC_T10DIF=y
> CONFIG_CRC64_ROCKSOFT=m
> CONFIG_CRC_ITU_T=m
> CONFIG_CRC32=y
> # CONFIG_CRC32_SELFTEST is not set
> CONFIG_CRC32_SLICEBY8=y
> # CONFIG_CRC32_SLICEBY4 is not set
> # CONFIG_CRC32_SARWATE is not set
> # CONFIG_CRC32_BIT is not set
> CONFIG_CRC64=m
> # CONFIG_CRC4 is not set
> CONFIG_CRC7=m
> CONFIG_LIBCRC32C=m
> CONFIG_CRC8=m
> CONFIG_XXHASH=y
> # CONFIG_RANDOM32_SELFTEST is not set
> CONFIG_ZLIB_INFLATE=y
> CONFIG_ZLIB_DEFLATE=y
> CONFIG_LZO_COMPRESS=y
> CONFIG_LZO_DECOMPRESS=y
> CONFIG_LZ4_DECOMPRESS=y
> CONFIG_ZSTD_COMMON=y
> CONFIG_ZSTD_COMPRESS=m
> CONFIG_ZSTD_DECOMPRESS=y
> CONFIG_XZ_DEC=y
> CONFIG_XZ_DEC_X86=y
> CONFIG_XZ_DEC_POWERPC=y
> CONFIG_XZ_DEC_IA64=y
> CONFIG_XZ_DEC_ARM=y
> CONFIG_XZ_DEC_ARMTHUMB=y
> CONFIG_XZ_DEC_SPARC=y
> # CONFIG_XZ_DEC_MICROLZMA is not set
> CONFIG_XZ_DEC_BCJ=y
> # CONFIG_XZ_DEC_TEST is not set
> CONFIG_DECOMPRESS_GZIP=y
> CONFIG_DECOMPRESS_BZIP2=y
> CONFIG_DECOMPRESS_LZMA=y
> CONFIG_DECOMPRESS_XZ=y
> CONFIG_DECOMPRESS_LZO=y
> CONFIG_DECOMPRESS_LZ4=y
> CONFIG_DECOMPRESS_ZSTD=y
> CONFIG_GENERIC_ALLOCATOR=y
> CONFIG_REED_SOLOMON=m
> CONFIG_REED_SOLOMON_ENC8=y
> CONFIG_REED_SOLOMON_DEC8=y
> CONFIG_TEXTSEARCH=y
> CONFIG_TEXTSEARCH_KMP=m
> CONFIG_TEXTSEARCH_BM=m
> CONFIG_TEXTSEARCH_FSM=m
> CONFIG_INTERVAL_TREE=y
> CONFIG_XARRAY_MULTI=y
> CONFIG_ASSOCIATIVE_ARRAY=y
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT_MAP=y
> CONFIG_HAS_DMA=y
> CONFIG_DMA_OPS=y
> CONFIG_NEED_SG_DMA_LENGTH=y
> CONFIG_NEED_DMA_MAP_STATE=y
> CONFIG_ARCH_DMA_ADDR_T_64BIT=y
> CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y
> CONFIG_SWIOTLB=y
> # CONFIG_DMA_API_DEBUG is not set
> # CONFIG_DMA_MAP_BENCHMARK is not set
> CONFIG_SGL_ALLOC=y
> CONFIG_CHECK_SIGNATURE=y
> CONFIG_CPUMASK_OFFSTACK=y
> # CONFIG_FORCE_NR_CPUS is not set
> CONFIG_CPU_RMAP=y
> CONFIG_DQL=y
> CONFIG_GLOB=y
> # CONFIG_GLOB_SELFTEST is not set
> CONFIG_NLATTR=y
> CONFIG_CLZ_TAB=y
> CONFIG_IRQ_POLL=y
> CONFIG_MPILIB=y
> CONFIG_SIGNATURE=y
> CONFIG_OID_REGISTRY=y
> CONFIG_UCS2_STRING=y
> CONFIG_HAVE_GENERIC_VDSO=y
> CONFIG_GENERIC_GETTIMEOFDAY=y
> CONFIG_GENERIC_VDSO_TIME_NS=y
> CONFIG_FONT_SUPPORT=y
> # CONFIG_FONTS is not set
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
> CONFIG_SG_POOL=y
> CONFIG_ARCH_HAS_PMEM_API=y
> CONFIG_MEMREGION=y
> CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
> CONFIG_ARCH_HAS_COPY_MC=y
> CONFIG_ARCH_STACKWALK=y
> CONFIG_STACKDEPOT=y
> CONFIG_SBITMAP=y
> # end of Library routines
> 
> CONFIG_ASN1_ENCODER=y
> 
> #
> # Kernel hacking
> #
> 
> #
> # printk and dmesg options
> #
> CONFIG_PRINTK_TIME=y
> CONFIG_PRINTK_CALLER=y
> # CONFIG_STACKTRACE_BUILD_ID is not set
> CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
> CONFIG_CONSOLE_LOGLEVEL_QUIET=4
> CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
> CONFIG_BOOT_PRINTK_DELAY=y
> CONFIG_DYNAMIC_DEBUG=y
> CONFIG_DYNAMIC_DEBUG_CORE=y
> CONFIG_SYMBOLIC_ERRNAME=y
> CONFIG_DEBUG_BUGVERBOSE=y
> # end of printk and dmesg options
> 
> CONFIG_DEBUG_KERNEL=y
> CONFIG_DEBUG_MISC=y
> 
> #
> # Compile-time checks and compiler options
> #
> CONFIG_DEBUG_INFO=y
> CONFIG_AS_HAS_NON_CONST_LEB128=y
> # CONFIG_DEBUG_INFO_NONE is not set
> # CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
> CONFIG_DEBUG_INFO_DWARF4=y
> # CONFIG_DEBUG_INFO_DWARF5 is not set
> # CONFIG_DEBUG_INFO_REDUCED is not set
> # CONFIG_DEBUG_INFO_COMPRESSED is not set
> # CONFIG_DEBUG_INFO_SPLIT is not set
> CONFIG_DEBUG_INFO_BTF=y
> CONFIG_PAHOLE_HAS_SPLIT_BTF=y
> CONFIG_DEBUG_INFO_BTF_MODULES=y
> # CONFIG_MODULE_ALLOW_BTF_MISMATCH is not set
> # CONFIG_GDB_SCRIPTS is not set
> CONFIG_FRAME_WARN=2048
> CONFIG_STRIP_ASM_SYMS=y
> # CONFIG_READABLE_ASM is not set
> # CONFIG_HEADERS_INSTALL is not set
> CONFIG_DEBUG_SECTION_MISMATCH=y
> CONFIG_SECTION_MISMATCH_WARN_ONLY=y
> CONFIG_OBJTOOL=y
> # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
> # end of Compile-time checks and compiler options
> 
> #
> # Generic Kernel Debugging Instruments
> #
> CONFIG_MAGIC_SYSRQ=y
> CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
> CONFIG_MAGIC_SYSRQ_SERIAL=y
> CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
> CONFIG_DEBUG_FS=y
> CONFIG_DEBUG_FS_ALLOW_ALL=y
> # CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
> # CONFIG_DEBUG_FS_ALLOW_NONE is not set
> CONFIG_HAVE_ARCH_KGDB=y
> # CONFIG_KGDB is not set
> CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
> # CONFIG_UBSAN is not set
> CONFIG_HAVE_ARCH_KCSAN=y
> CONFIG_HAVE_KCSAN_COMPILER=y
> # CONFIG_KCSAN is not set
> # end of Generic Kernel Debugging Instruments
> 
> #
> # Networking Debugging
> #
> # CONFIG_NET_DEV_REFCNT_TRACKER is not set
> # CONFIG_NET_NS_REFCNT_TRACKER is not set
> # CONFIG_DEBUG_NET is not set
> # end of Networking Debugging
> 
> #
> # Memory Debugging
> #
> # CONFIG_PAGE_EXTENSION is not set
> # CONFIG_DEBUG_PAGEALLOC is not set
> CONFIG_SLUB_DEBUG=y
> # CONFIG_SLUB_DEBUG_ON is not set
> # CONFIG_PAGE_OWNER is not set
> # CONFIG_PAGE_TABLE_CHECK is not set
> # CONFIG_PAGE_POISONING is not set
> # CONFIG_DEBUG_PAGE_REF is not set
> # CONFIG_DEBUG_RODATA_TEST is not set
> CONFIG_ARCH_HAS_DEBUG_WX=y
> # CONFIG_DEBUG_WX is not set
> CONFIG_GENERIC_PTDUMP=y
> # CONFIG_PTDUMP_DEBUGFS is not set
> # CONFIG_DEBUG_OBJECTS is not set
> # CONFIG_SHRINKER_DEBUG is not set
> CONFIG_HAVE_DEBUG_KMEMLEAK=y
> # CONFIG_DEBUG_KMEMLEAK is not set
> # CONFIG_DEBUG_STACK_USAGE is not set
> # CONFIG_SCHED_STACK_END_CHECK is not set
> CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
> # CONFIG_DEBUG_VM is not set
> # CONFIG_DEBUG_VM_PGTABLE is not set
> CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
> # CONFIG_DEBUG_VIRTUAL is not set
> CONFIG_DEBUG_MEMORY_INIT=y
> # CONFIG_DEBUG_PER_CPU_MAPS is not set
> CONFIG_HAVE_ARCH_KASAN=y
> CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
> CONFIG_CC_HAS_KASAN_GENERIC=y
> CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
> # CONFIG_KASAN is not set
> CONFIG_HAVE_ARCH_KFENCE=y
> # CONFIG_KFENCE is not set
> CONFIG_HAVE_ARCH_KMSAN=y
> # end of Memory Debugging
> 
> CONFIG_DEBUG_SHIRQ=y
> 
> #
> # Debug Oops, Lockups and Hangs
> #
> CONFIG_PANIC_ON_OOPS=y
> CONFIG_PANIC_ON_OOPS_VALUE=1
> CONFIG_PANIC_TIMEOUT=0
> CONFIG_LOCKUP_DETECTOR=y
> CONFIG_SOFTLOCKUP_DETECTOR=y
> # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
> CONFIG_HARDLOCKUP_DETECTOR_PERF=y
> CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
> CONFIG_HARDLOCKUP_DETECTOR=y
> CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
> CONFIG_DETECT_HUNG_TASK=y
> CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480
> # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
> CONFIG_WQ_WATCHDOG=y
> # CONFIG_TEST_LOCKUP is not set
> # end of Debug Oops, Lockups and Hangs
> 
> #
> # Scheduler Debugging
> #
> CONFIG_SCHED_DEBUG=y
> CONFIG_SCHED_INFO=y
> CONFIG_SCHEDSTATS=y
> # end of Scheduler Debugging
> 
> # CONFIG_DEBUG_TIMEKEEPING is not set
> 
> #
> # Lock Debugging (spinlocks, mutexes, etc...)
> #
> CONFIG_LOCK_DEBUGGING_SUPPORT=y
> # CONFIG_PROVE_LOCKING is not set
> # CONFIG_LOCK_STAT is not set
> # CONFIG_DEBUG_RT_MUTEXES is not set
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_MUTEXES is not set
> # CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
> # CONFIG_DEBUG_RWSEMS is not set
> # CONFIG_DEBUG_LOCK_ALLOC is not set
> CONFIG_DEBUG_ATOMIC_SLEEP=y
> # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
> # CONFIG_LOCK_TORTURE_TEST is not set
> # CONFIG_WW_MUTEX_SELFTEST is not set
> # CONFIG_SCF_TORTURE_TEST is not set
> # CONFIG_CSD_LOCK_WAIT_DEBUG is not set
> # end of Lock Debugging (spinlocks, mutexes, etc...)
> 
> # CONFIG_DEBUG_IRQFLAGS is not set
> CONFIG_STACKTRACE=y
> # CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
> # CONFIG_DEBUG_KOBJECT is not set
> 
> #
> # Debug kernel data structures
> #
> CONFIG_DEBUG_LIST=y
> # CONFIG_DEBUG_PLIST is not set
> # CONFIG_DEBUG_SG is not set
> # CONFIG_DEBUG_NOTIFIERS is not set
> CONFIG_BUG_ON_DATA_CORRUPTION=y
> # CONFIG_DEBUG_MAPLE_TREE is not set
> # end of Debug kernel data structures
> 
> # CONFIG_DEBUG_CREDENTIALS is not set
> 
> #
> # RCU Debugging
> #
> # CONFIG_RCU_SCALE_TEST is not set
> # CONFIG_RCU_TORTURE_TEST is not set
> # CONFIG_RCU_REF_SCALE_TEST is not set
> CONFIG_RCU_CPU_STALL_TIMEOUT=60
> CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
> # CONFIG_RCU_TRACE is not set
> # CONFIG_RCU_EQS_DEBUG is not set
> # end of RCU Debugging
> 
> # CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
> # CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
> CONFIG_LATENCYTOP=y
> CONFIG_USER_STACKTRACE_SUPPORT=y
> CONFIG_NOP_TRACER=y
> CONFIG_HAVE_RETHOOK=y
> CONFIG_RETHOOK=y
> CONFIG_HAVE_FUNCTION_TRACER=y
> CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
> CONFIG_HAVE_DYNAMIC_FTRACE=y
> CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
> CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
> CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
> CONFIG_HAVE_DYNAMIC_FTRACE_NO_PATCHABLE=y
> CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
> CONFIG_HAVE_FENTRY=y
> CONFIG_HAVE_OBJTOOL_MCOUNT=y
> CONFIG_HAVE_C_RECORDMCOUNT=y
> CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
> CONFIG_BUILDTIME_MCOUNT_SORT=y
> CONFIG_TRACER_MAX_TRACE=y
> CONFIG_TRACE_CLOCK=y
> CONFIG_RING_BUFFER=y
> CONFIG_EVENT_TRACING=y
> CONFIG_CONTEXT_SWITCH_TRACER=y
> CONFIG_TRACING=y
> CONFIG_GENERIC_TRACER=y
> CONFIG_TRACING_SUPPORT=y
> CONFIG_FTRACE=y
> # CONFIG_BOOTTIME_TRACING is not set
> CONFIG_FUNCTION_TRACER=y
> CONFIG_FUNCTION_GRAPH_TRACER=y
> CONFIG_DYNAMIC_FTRACE=y
> CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
> CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
> CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y
> # CONFIG_FPROBE is not set
> CONFIG_FUNCTION_PROFILER=y
> CONFIG_STACK_TRACER=y
> # CONFIG_IRQSOFF_TRACER is not set
> CONFIG_SCHED_TRACER=y
> CONFIG_HWLAT_TRACER=y
> # CONFIG_OSNOISE_TRACER is not set
> # CONFIG_TIMERLAT_TRACER is not set
> # CONFIG_MMIOTRACE is not set
> CONFIG_FTRACE_SYSCALLS=y
> CONFIG_TRACER_SNAPSHOT=y
> # CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
> CONFIG_BRANCH_PROFILE_NONE=y
> # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
> # CONFIG_BLK_DEV_IO_TRACE is not set
> CONFIG_KPROBE_EVENTS=y
> # CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
> CONFIG_UPROBE_EVENTS=y
> CONFIG_BPF_EVENTS=y
> CONFIG_DYNAMIC_EVENTS=y
> CONFIG_PROBE_EVENTS=y
> CONFIG_BPF_KPROBE_OVERRIDE=y
> CONFIG_FTRACE_MCOUNT_RECORD=y
> CONFIG_FTRACE_MCOUNT_USE_CC=y
> CONFIG_TRACING_MAP=y
> CONFIG_SYNTH_EVENTS=y
> CONFIG_HIST_TRIGGERS=y
> # CONFIG_TRACE_EVENT_INJECT is not set
> # CONFIG_TRACEPOINT_BENCHMARK is not set
> CONFIG_RING_BUFFER_BENCHMARK=m
> # CONFIG_TRACE_EVAL_MAP_FILE is not set
> # CONFIG_FTRACE_RECORD_RECURSION is not set
> # CONFIG_FTRACE_STARTUP_TEST is not set
> # CONFIG_FTRACE_SORT_STARTUP_TEST is not set
> # CONFIG_RING_BUFFER_STARTUP_TEST is not set
> # CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
> # CONFIG_PREEMPTIRQ_DELAY_TEST is not set
> # CONFIG_SYNTH_EVENT_GEN_TEST is not set
> # CONFIG_KPROBE_EVENT_GEN_TEST is not set
> # CONFIG_HIST_TRIGGERS_DEBUG is not set
> # CONFIG_RV is not set
> CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
> # CONFIG_SAMPLES is not set
> CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
> CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
> CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
> CONFIG_STRICT_DEVMEM=y
> # CONFIG_IO_STRICT_DEVMEM is not set
> 
> #
> # x86 Debugging
> #
> CONFIG_EARLY_PRINTK_USB=y
> CONFIG_X86_VERBOSE_BOOTUP=y
> CONFIG_EARLY_PRINTK=y
> CONFIG_EARLY_PRINTK_DBGP=y
> CONFIG_EARLY_PRINTK_USB_XDBC=y
> # CONFIG_EFI_PGT_DUMP is not set
> # CONFIG_DEBUG_TLBFLUSH is not set
> CONFIG_HAVE_MMIOTRACE_SUPPORT=y
> # CONFIG_X86_DECODER_SELFTEST is not set
> CONFIG_IO_DELAY_0X80=y
> # CONFIG_IO_DELAY_0XED is not set
> # CONFIG_IO_DELAY_UDELAY is not set
> # CONFIG_IO_DELAY_NONE is not set
> CONFIG_DEBUG_BOOT_PARAMS=y
> # CONFIG_CPA_DEBUG is not set
> # CONFIG_DEBUG_ENTRY is not set
> # CONFIG_DEBUG_NMI_SELFTEST is not set
> # CONFIG_X86_DEBUG_FPU is not set
> # CONFIG_PUNIT_ATOM_DEBUG is not set
> CONFIG_UNWINDER_ORC=y
> # CONFIG_UNWINDER_FRAME_POINTER is not set
> # end of x86 Debugging
> 
> #
> # Kernel Testing and Coverage
> #
> # CONFIG_KUNIT is not set
> # CONFIG_NOTIFIER_ERROR_INJECTION is not set
> CONFIG_FUNCTION_ERROR_INJECTION=y
> # CONFIG_FAULT_INJECTION is not set
> CONFIG_ARCH_HAS_KCOV=y
> CONFIG_CC_HAS_SANCOV_TRACE_PC=y
> # CONFIG_KCOV is not set
> CONFIG_RUNTIME_TESTING_MENU=y
> # CONFIG_LKDTM is not set
> # CONFIG_TEST_MIN_HEAP is not set
> # CONFIG_TEST_DIV64 is not set
> # CONFIG_BACKTRACE_SELF_TEST is not set
> # CONFIG_TEST_REF_TRACKER is not set
> # CONFIG_RBTREE_TEST is not set
> # CONFIG_REED_SOLOMON_TEST is not set
> # CONFIG_INTERVAL_TREE_TEST is not set
> # CONFIG_PERCPU_TEST is not set
> # CONFIG_ATOMIC64_SELFTEST is not set
> # CONFIG_ASYNC_RAID6_TEST is not set
> # CONFIG_TEST_HEXDUMP is not set
> # CONFIG_STRING_SELFTEST is not set
> # CONFIG_TEST_STRING_HELPERS is not set
> # CONFIG_TEST_STRSCPY is not set
> # CONFIG_TEST_KSTRTOX is not set
> # CONFIG_TEST_PRINTF is not set
> # CONFIG_TEST_SCANF is not set
> # CONFIG_TEST_BITMAP is not set
> # CONFIG_TEST_UUID is not set
> # CONFIG_TEST_XARRAY is not set
> # CONFIG_TEST_RHASHTABLE is not set
> # CONFIG_TEST_SIPHASH is not set
> # CONFIG_TEST_IDA is not set
> # CONFIG_TEST_LKM is not set
> # CONFIG_TEST_BITOPS is not set
> # CONFIG_TEST_VMALLOC is not set
> # CONFIG_TEST_USER_COPY is not set
> # CONFIG_TEST_BPF is not set
> # CONFIG_TEST_BLACKHOLE_DEV is not set
> # CONFIG_FIND_BIT_BENCHMARK is not set
> # CONFIG_TEST_FIRMWARE is not set
> # CONFIG_TEST_SYSCTL is not set
> # CONFIG_TEST_UDELAY is not set
> # CONFIG_TEST_STATIC_KEYS is not set
> # CONFIG_TEST_DYNAMIC_DEBUG is not set
> # CONFIG_TEST_KMOD is not set
> # CONFIG_TEST_MEMCAT_P is not set
> # CONFIG_TEST_LIVEPATCH is not set
> # CONFIG_TEST_MEMINIT is not set
> # CONFIG_TEST_HMM is not set
> # CONFIG_TEST_FREE_PAGES is not set
> # CONFIG_TEST_FPU is not set
> # CONFIG_TEST_CLOCKSOURCE_WATCHDOG is not set
> CONFIG_ARCH_USE_MEMTEST=y
> # CONFIG_MEMTEST is not set
> # end of Kernel Testing and Coverage
> 
> #
> # Rust hacking
> #
> # end of Rust hacking
> # end of Kernel hacking

> #!/bin/sh
> 
> export_top_env()
> {
> 	export suite='fxmark'
> 	export testcase='fxmark'
> 	export category='benchmark'
> 	export media='ssd'
> 	export job_origin='fxmark-1ssd.yaml'
> 	export queue_cmdline_keys='branch
> commit
> kbuild_queue_analysis'
> 	export queue='validate'
> 	export testbox='lkp-icl-2sp5'
> 	export tbox_group='lkp-icl-2sp5'
> 	export submit_id='637754da2b15eb5d2a037337'
> 	export job_file='/lkp/jobs/scheduled/lkp-icl-2sp5/fxmark-performance-directio-1SSD-xfs-ssd-MWCM-debian-11.1-x86_64-20220510.cgz-ada76f94c5b32c1828955d70f692b111a9ec2d33-20221118-23850-1bodkv-5.yaml'
> 	export id='d8682c0ae449ee2899cf13fe8cdd3d37d760e2e6'
> 	export queuer_version='/zday/lkp'
> 	export model='Ice Lake'
> 	export nr_node=2
> 	export nr_cpu=128
> 	export memory='128G'
> 	export nr_ssd_partitions=3
> 	export nr_hdd_partitions=6
> 	export hdd_partitions='/dev/disk/by-id/ata-WDC_WD20SPZX-08UA7_WD-WXF2EA04ZHES-part*'
> 	export ssd_partitions='/dev/disk/by-id/ata-INTEL_SSDSC2BB800G4_PHWL4204003A800RGN-part*'
> 	export rootfs_partition='/dev/disk/by-id/ata-SanDisk_SDSSDH3250G_182971800454-part1'
> 	export kernel_cmdline_hw='acpi_rsdp=0x69ffd014'
> 	export brand='Intel(R) Xeon(R) Platinum 8358 CPU @ 2.60GHz'
> 	export need_kconfig='BLK_DEV_SD
> SCSI
> {"BLOCK"=>"y"}
> SATA_AHCI
> SATA_AHCI_PLATFORM
> ATA
> {"PCI"=>"y"}
> {"F2FS_FS"=>"m"}'
> 	export commit='ada76f94c5b32c1828955d70f692b111a9ec2d33'
> 	export ucode='0xd000363'
> 	export bisect_dmesg=true
> 	export kconfig='x86_64-rhel-8.3'
> 	export enqueue_time='2022-11-18 17:48:10 +0800'
> 	export _id='637754fa2b15eb5d2a037339'
> 	export _rt='/result/fxmark/performance-directio-1SSD-xfs-ssd-MWCM/lkp-icl-2sp5/debian-11.1-x86_64-20220510.cgz/x86_64-rhel-8.3/gcc-11/ada76f94c5b32c1828955d70f692b111a9ec2d33'
> 	export user='lkp'
> 	export compiler='gcc-11'
> 	export LKP_SERVER='internal-lkp-server'
> 	export head_commit='a7a99adde43bcc3badd7140fc406e5182c621a60'
> 	export base_commit='094226ad94f471a9f19e8f8e7140a09c2625abaa'
> 	export branch='linux-review/Gao-Xiang/xfs-account-extra-freespace-btree-splits-for-multiple-allocations/20221109-114953'
> 	export rootfs='debian-11.1-x86_64-20220510.cgz'
> 	export result_root='/result/fxmark/performance-directio-1SSD-xfs-ssd-MWCM/lkp-icl-2sp5/debian-11.1-x86_64-20220510.cgz/x86_64-rhel-8.3/gcc-11/ada76f94c5b32c1828955d70f692b111a9ec2d33/3'
> 	export scheduler_version='/lkp/lkp/.src-20221118-122311'
> 	export arch='x86_64'
> 	export max_uptime=2100
> 	export initrd='/osimage/debian/debian-11.1-x86_64-20220510.cgz'
> 	export bootloader_append='root=/dev/ram0
> RESULT_ROOT=/result/fxmark/performance-directio-1SSD-xfs-ssd-MWCM/lkp-icl-2sp5/debian-11.1-x86_64-20220510.cgz/x86_64-rhel-8.3/gcc-11/ada76f94c5b32c1828955d70f692b111a9ec2d33/3
> BOOT_IMAGE=/pkg/linux/x86_64-rhel-8.3/gcc-11/ada76f94c5b32c1828955d70f692b111a9ec2d33/vmlinuz-6.1.0-rc1-00031-gada76f94c5b3
> branch=linux-review/Gao-Xiang/xfs-account-extra-freespace-btree-splits-for-multiple-allocations/20221109-114953
> job=/lkp/jobs/scheduled/lkp-icl-2sp5/fxmark-performance-directio-1SSD-xfs-ssd-MWCM-debian-11.1-x86_64-20220510.cgz-ada76f94c5b32c1828955d70f692b111a9ec2d33-20221118-23850-1bodkv-5.yaml
> user=lkp
> ARCH=x86_64
> kconfig=x86_64-rhel-8.3
> commit=ada76f94c5b32c1828955d70f692b111a9ec2d33
> initcall_debug
> acpi_rsdp=0x69ffd014
> max_uptime=2100
> LKP_SERVER=internal-lkp-server
> nokaslr
> selinux=0
> debug
> apic=debug
> sysrq_always_enabled
> rcupdate.rcu_cpu_stall_timeout=100
> net.ifnames=0
> printk.devkmsg=on
> panic=-1
> softlockup_panic=1
> nmi_watchdog=panic
> oops=panic
> load_ramdisk=2
> prompt_ramdisk=0
> drbd.minor_count=8
> systemd.log_level=err
> ignore_loglevel
> console=tty0
> earlyprintk=ttyS0,115200
> console=ttyS0,115200
> vga=normal
> rw'
> 	export modules_initrd='/pkg/linux/x86_64-rhel-8.3/gcc-11/ada76f94c5b32c1828955d70f692b111a9ec2d33/modules.cgz'
> 	export bm_initrd='/osimage/deps/debian-11.1-x86_64-20220510.cgz/run-ipconfig_20220515.cgz,/osimage/deps/debian-11.1-x86_64-20220510.cgz/lkp_20220513.cgz,/osimage/deps/debian-11.1-x86_64-20220510.cgz/rsync-rootfs_20220515.cgz,/osimage/deps/debian-11.1-x86_64-20220510.cgz/fxmark_20220601.cgz,/osimage/pkg/debian-11.1-x86_64-20220510.cgz/fxmark-x86_64-0ce9491-1_20220601.cgz,/osimage/deps/debian-11.1-x86_64-20220510.cgz/mpstat_20220516.cgz,/osimage/deps/debian-11.1-x86_64-20220510.cgz/turbostat_20220514.cgz,/osimage/pkg/debian-11.1-x86_64-20220510.cgz/turbostat-x86_64-210e04ff7681-1_20220518.cgz,/osimage/deps/debian-11.1-x86_64-20220510.cgz/perf_20221112.cgz,/osimage/pkg/debian-11.1-x86_64-20220510.cgz/perf-x86_64-fef7fd48922d-1_20221112.cgz,/osimage/pkg/debian-11.1-x86_64-20220510.cgz/sar-x86_64-c5bb321-1_20220518.cgz,/osimage/deps/debian-11.1-x86_64-20220510.cgz/hw_20220526.cgz'
> 	export ucode_initrd='/osimage/ucode/intel-ucode-20220804.cgz'
> 	export lkp_initrd='/osimage/user/lkp/lkp-x86_64.cgz'
> 	export site='inn'
> 	export LKP_CGI_PORT=80
> 	export LKP_CIFS_PORT=139
> 	export last_kernel='6.1.0-rc5-07698-ga7a99adde43b'
> 	export repeat_to=6
> 	export schedule_notify_address=
> 	export kbuild_queue_analysis=1
> 	export kernel='/pkg/linux/x86_64-rhel-8.3/gcc-11/ada76f94c5b32c1828955d70f692b111a9ec2d33/vmlinuz-6.1.0-rc1-00031-gada76f94c5b3'
> 	export dequeue_time='2022-11-18 17:51:51 +0800'
> 	export job_initrd='/lkp/jobs/scheduled/lkp-icl-2sp5/fxmark-performance-directio-1SSD-xfs-ssd-MWCM-debian-11.1-x86_64-20220510.cgz-ada76f94c5b32c1828955d70f692b111a9ec2d33-20221118-23850-1bodkv-5.cgz'
> 
> 	[ -n "$LKP_SRC" ] ||
> 	export LKP_SRC=/lkp/${user:-lkp}/src
> }
> 
> run_job()
> {
> 	echo $$ > $TMP/run-job.pid
> 
> 	. $LKP_SRC/lib/http.sh
> 	. $LKP_SRC/lib/job.sh
> 	. $LKP_SRC/lib/env.sh
> 
> 	export_top_env
> 
> 	run_setup nr_ssd=1 $LKP_SRC/setup/disk
> 
> 	run_setup $LKP_SRC/setup/cpufreq_governor 'performance'
> 
> 	run_monitor $LKP_SRC/monitors/wrapper kmsg
> 	run_monitor $LKP_SRC/monitors/no-stdout/wrapper boot-time
> 	run_monitor $LKP_SRC/monitors/wrapper uptime
> 	run_monitor $LKP_SRC/monitors/wrapper iostat
> 	run_monitor $LKP_SRC/monitors/wrapper heartbeat
> 	run_monitor $LKP_SRC/monitors/wrapper vmstat
> 	run_monitor $LKP_SRC/monitors/wrapper numa-numastat
> 	run_monitor $LKP_SRC/monitors/wrapper numa-vmstat
> 	run_monitor $LKP_SRC/monitors/wrapper numa-meminfo
> 	run_monitor $LKP_SRC/monitors/wrapper proc-vmstat
> 	run_monitor $LKP_SRC/monitors/wrapper proc-stat
> 	run_monitor $LKP_SRC/monitors/wrapper meminfo
> 	run_monitor $LKP_SRC/monitors/wrapper slabinfo
> 	run_monitor $LKP_SRC/monitors/wrapper interrupts
> 	run_monitor $LKP_SRC/monitors/wrapper lock_stat
> 	run_monitor lite_mode=1 $LKP_SRC/monitors/wrapper perf-sched
> 	run_monitor $LKP_SRC/monitors/wrapper softirqs
> 	run_monitor $LKP_SRC/monitors/one-shot/wrapper bdi_dev_mapping
> 	run_monitor $LKP_SRC/monitors/wrapper diskstats
> 	run_monitor $LKP_SRC/monitors/wrapper nfsstat
> 	run_monitor $LKP_SRC/monitors/wrapper cpuidle
> 	run_monitor $LKP_SRC/monitors/wrapper cpufreq-stats
> 	run_monitor $LKP_SRC/monitors/wrapper turbostat
> 	run_monitor $LKP_SRC/monitors/wrapper sched_debug
> 	run_monitor $LKP_SRC/monitors/wrapper perf-stat
> 	run_monitor $LKP_SRC/monitors/wrapper mpstat
> 	run_monitor debug_mode=0 $LKP_SRC/monitors/no-stdout/wrapper perf-profile
> 	run_monitor $LKP_SRC/monitors/wrapper oom-killer
> 	run_monitor $LKP_SRC/monitors/plain/watchdog
> 
> 	run_test test='MWCM' fstype='xfs' directio='directio' $LKP_SRC/tests/wrapper fxmark
> }
> 
> extract_stats()
> {
> 	export stats_part_begin=
> 	export stats_part_end=
> 
> 	env test='MWCM' fstype='xfs' directio='directio' $LKP_SRC/stats/wrapper fxmark
> 	$LKP_SRC/stats/wrapper kmsg
> 	$LKP_SRC/stats/wrapper boot-time
> 	$LKP_SRC/stats/wrapper uptime
> 	$LKP_SRC/stats/wrapper iostat
> 	$LKP_SRC/stats/wrapper vmstat
> 	$LKP_SRC/stats/wrapper numa-numastat
> 	$LKP_SRC/stats/wrapper numa-vmstat
> 	$LKP_SRC/stats/wrapper numa-meminfo
> 	$LKP_SRC/stats/wrapper proc-vmstat
> 	$LKP_SRC/stats/wrapper meminfo
> 	$LKP_SRC/stats/wrapper slabinfo
> 	$LKP_SRC/stats/wrapper interrupts
> 	$LKP_SRC/stats/wrapper lock_stat
> 	env lite_mode=1 $LKP_SRC/stats/wrapper perf-sched
> 	$LKP_SRC/stats/wrapper softirqs
> 	$LKP_SRC/stats/wrapper diskstats
> 	$LKP_SRC/stats/wrapper nfsstat
> 	$LKP_SRC/stats/wrapper cpuidle
> 	$LKP_SRC/stats/wrapper turbostat
> 	$LKP_SRC/stats/wrapper sched_debug
> 	$LKP_SRC/stats/wrapper perf-stat
> 	$LKP_SRC/stats/wrapper mpstat
> 	env debug_mode=0 $LKP_SRC/stats/wrapper perf-profile
> 
> 	$LKP_SRC/stats/wrapper time fxmark.time
> 	$LKP_SRC/stats/wrapper dmesg
> 	$LKP_SRC/stats/wrapper kmsg
> 	$LKP_SRC/stats/wrapper last_state
> 	$LKP_SRC/stats/wrapper stderr
> 	$LKP_SRC/stats/wrapper time
> }
> 
> "$@"

> ---
> 
> #! jobs/fxmark-1ssd.yaml
> suite: fxmark
> testcase: fxmark
> category: benchmark
> disk: 1SSD
> media: ssd
> fxmark:
>   test: MWCM
>   fstype: xfs
>   directio: directio
> job_origin: fxmark-1ssd.yaml
> 
> #! queue options
> queue_cmdline_keys:
> - branch
> - commit
> - kbuild_queue_analysis
> queue: bisect
> testbox: lkp-icl-2sp5
> tbox_group: lkp-icl-2sp5
> submit_id: 637661968db1c16a8ea60a36
> job_file: "/lkp/jobs/scheduled/lkp-icl-2sp5/fxmark-performance-directio-1SSD-xfs-ssd-MWCM-debian-11.1-x86_64-20220510.cgz-ada76f94c5b32c1828955d70f692b111a9ec2d33-20221118-27278-13gsnxe-2.yaml"
> id: 77310faf1eba4e1005cddf3a5530531c9d3d9dee
> queuer_version: "/zday/lkp"
> 
> #! hosts/lkp-icl-2sp5
> model: Ice Lake
> nr_node: 2
> nr_cpu: 128
> memory: 128G
> nr_ssd_partitions: 3
> nr_hdd_partitions: 6
> hdd_partitions: "/dev/disk/by-id/ata-WDC_WD20SPZX-08UA7_WD-WXF2EA04ZHES-part*"
> ssd_partitions: "/dev/disk/by-id/ata-INTEL_SSDSC2BB800G4_PHWL4204003A800RGN-part*"
> rootfs_partition: "/dev/disk/by-id/ata-SanDisk_SDSSDH3250G_182971800454-part1"
> kernel_cmdline_hw: acpi_rsdp=0x69ffd014
> brand: Intel(R) Xeon(R) Platinum 8358 CPU @ 2.60GHz
> 
> #! include/category/benchmark
> kmsg:
> boot-time:
> uptime:
> iostat:
> heartbeat:
> vmstat:
> numa-numastat:
> numa-vmstat:
> numa-meminfo:
> proc-vmstat:
> proc-stat:
> meminfo:
> slabinfo:
> interrupts:
> lock_stat:
> perf-sched:
>   lite_mode: 1
> softirqs:
> bdi_dev_mapping:
> diskstats:
> nfsstat:
> cpuidle:
> cpufreq-stats:
> turbostat:
> sched_debug:
> perf-stat:
> mpstat:
> perf-profile:
>   debug_mode: 0
> 
> #! include/category/ALL
> cpufreq_governor: performance
> 
> #! include/disk/nr_ssd
> need_kconfig:
> - BLK_DEV_SD
> - SCSI
> - BLOCK: y
> - SATA_AHCI
> - SATA_AHCI_PLATFORM
> - ATA
> - PCI: y
> - F2FS_FS: m
> 
> #! include/fxmark
> 
> #! include/queue/cyclic
> commit: ada76f94c5b32c1828955d70f692b111a9ec2d33
> 
> #! include/testbox/lkp-icl-2sp5
> ucode: '0xd000363'
> bisect_dmesg: true
> kconfig: x86_64-rhel-8.3
> enqueue_time: 2022-11-18 00:30:15.015998602 +08:00
> _id: 637661ba8db1c16a8ea60a38
> _rt: "/result/fxmark/performance-directio-1SSD-xfs-ssd-MWCM/lkp-icl-2sp5/debian-11.1-x86_64-20220510.cgz/x86_64-rhel-8.3/gcc-11/ada76f94c5b32c1828955d70f692b111a9ec2d33"
> 
> #! schedule options
> user: lkp
> compiler: gcc-11
> LKP_SERVER: internal-lkp-server
> head_commit: a7a99adde43bcc3badd7140fc406e5182c621a60
> base_commit: '094226ad94f471a9f19e8f8e7140a09c2625abaa'
> branch: linux-devel/devel-hourly-20221114-110033
> rootfs: debian-11.1-x86_64-20220510.cgz
> result_root: "/result/fxmark/performance-directio-1SSD-xfs-ssd-MWCM/lkp-icl-2sp5/debian-11.1-x86_64-20220510.cgz/x86_64-rhel-8.3/gcc-11/ada76f94c5b32c1828955d70f692b111a9ec2d33/0"
> scheduler_version: "/lkp/lkp/.src-20221117-125719"
> arch: x86_64
> max_uptime: 2100
> initrd: "/osimage/debian/debian-11.1-x86_64-20220510.cgz"
> bootloader_append:
> - root=/dev/ram0
> - RESULT_ROOT=/result/fxmark/performance-directio-1SSD-xfs-ssd-MWCM/lkp-icl-2sp5/debian-11.1-x86_64-20220510.cgz/x86_64-rhel-8.3/gcc-11/ada76f94c5b32c1828955d70f692b111a9ec2d33/0
> - BOOT_IMAGE=/pkg/linux/x86_64-rhel-8.3/gcc-11/ada76f94c5b32c1828955d70f692b111a9ec2d33/vmlinuz-6.1.0-rc1-00031-gada76f94c5b3
> - branch=linux-devel/devel-hourly-20221114-110033
> - job=/lkp/jobs/scheduled/lkp-icl-2sp5/fxmark-performance-directio-1SSD-xfs-ssd-MWCM-debian-11.1-x86_64-20220510.cgz-ada76f94c5b32c1828955d70f692b111a9ec2d33-20221118-27278-13gsnxe-2.yaml
> - user=lkp
> - ARCH=x86_64
> - kconfig=x86_64-rhel-8.3
> - commit=ada76f94c5b32c1828955d70f692b111a9ec2d33
> - initcall_debug
> - acpi_rsdp=0x69ffd014
> - max_uptime=2100
> - LKP_SERVER=internal-lkp-server
> - nokaslr
> - selinux=0
> - debug
> - apic=debug
> - sysrq_always_enabled
> - rcupdate.rcu_cpu_stall_timeout=100
> - net.ifnames=0
> - printk.devkmsg=on
> - panic=-1
> - softlockup_panic=1
> - nmi_watchdog=panic
> - oops=panic
> - load_ramdisk=2
> - prompt_ramdisk=0
> - drbd.minor_count=8
> - systemd.log_level=err
> - ignore_loglevel
> - console=tty0
> - earlyprintk=ttyS0,115200
> - console=ttyS0,115200
> - vga=normal
> - rw
> 
> #! runtime status
> modules_initrd: "/pkg/linux/x86_64-rhel-8.3/gcc-11/ada76f94c5b32c1828955d70f692b111a9ec2d33/modules.cgz"
> bm_initrd: "/osimage/deps/debian-11.1-x86_64-20220510.cgz/run-ipconfig_20220515.cgz,/osimage/deps/debian-11.1-x86_64-20220510.cgz/lkp_20220513.cgz,/osimage/deps/debian-11.1-x86_64-20220510.cgz/rsync-rootfs_20220515.cgz,/osimage/deps/debian-11.1-x86_64-20220510.cgz/fxmark_20220601.cgz,/osimage/pkg/debian-11.1-x86_64-20220510.cgz/fxmark-x86_64-0ce9491-1_20220601.cgz,/osimage/deps/debian-11.1-x86_64-20220510.cgz/mpstat_20220516.cgz,/osimage/deps/debian-11.1-x86_64-20220510.cgz/turbostat_20220514.cgz,/osimage/pkg/debian-11.1-x86_64-20220510.cgz/turbostat-x86_64-210e04ff7681-1_20220518.cgz,/osimage/deps/debian-11.1-x86_64-20220510.cgz/perf_20221112.cgz,/osimage/pkg/debian-11.1-x86_64-20220510.cgz/perf-x86_64-fef7fd48922d-1_20221112.cgz,/osimage/pkg/debian-11.1-x86_64-20220510.cgz/sar-x86_64-c5bb321-1_20220518.cgz,/osimage/deps/debian-11.1-x86_64-20220510.cgz/hw_20220526.cgz"
> ucode_initrd: "/osimage/ucode/intel-ucode-20220804.cgz"
> lkp_initrd: "/osimage/user/lkp/lkp-x86_64.cgz"
> site: inn
> 
> #! /cephfs/db/releases/20221114171303/lkp-src/include/site/inn
> LKP_CGI_PORT: 80
> LKP_CIFS_PORT: 139
> oom-killer:
> watchdog:
> last_kernel: 6.1.0-rc3
> repeat_to: 3
> schedule_notify_address:
> 
> #! user overrides
> kbuild_queue_analysis: 1
> kernel: "/pkg/linux/x86_64-rhel-8.3/gcc-11/ada76f94c5b32c1828955d70f692b111a9ec2d33/vmlinuz-6.1.0-rc1-00031-gada76f94c5b3"
> dequeue_time: 2022-11-18 00:40:21.930918383 +08:00
> 
> #! /cephfs/db/releases/20221117174231/lkp-src/include/site/inn
> job_state: finished
> loadavg: 2.36 5.61 6.01 1/1131 30089
> start_time: '1668703447'
> end_time: '1668704304'
> version: "/lkp/lkp/.src-20221117-125759:ffb1dc372:206777e71"

> 
> for cpu_dir in /sys/devices/system/cpu/cpu[0-9]*
> do
> 	online_file="$cpu_dir"/online
> 	[ -f "$online_file" ] && [ "$(cat "$online_file")" -eq 0 ] && continue
> 
> 	file="$cpu_dir"/cpufreq/scaling_governor
> 	[ -f "$file" ] && echo "performance" > "$file"
> done
>