diff mbox series

[v4,1/2] dt-bindings: hwmon: (lm75) Add AMS AS6200 temperature sensor

Message ID 17ba2dfdb3d25bf1b5b4ed9f858b6e28902bedbe.1703127334.git.alkuor@gmail.com
State New
Headers
Series [v4,1/2] dt-bindings: hwmon: (lm75) Add AMS AS6200 temperature sensor |

Commit Message

Abdel Alkuor Dec. 23, 2023, 4:21 p.m. UTC 
  as6200 is a temperature sensor with a range between -40°C to
125°C degrees and an accuracy of ±0.4°C degree between 0
and 65°C and ±1°C for the other ranges.

Signed-off-by: Abdel Alkuor <alkuor@gmail.com>
---
Changes in v4:
  - Add chips that support interrupt
Changes in v3:
  - Enable interrupt property conditionally based on the chips that
    support it.
  - Fix alignment for the added example
Changes in v2:
  - Incorporate as6200 into lm75 bindings

 .../devicetree/bindings/hwmon/lm75.yaml       | 33 +++++++++++++++++++
 1 file changed, 33 insertions(+)

Comments

Krzysztof Kozlowski Dec. 24, 2023, 9:32 a.m. UTC | #1 
On 23/12/2023 17:21, Abdel Alkuor wrote:
> as6200 is a temperature sensor with a range between -40°C to
> 125°C degrees and an accuracy of ±0.4°C degree between 0
> and 65°C and ±1°C for the other ranges.
> 
> Signed-off-by: Abdel Alkuor <alkuor@gmail.com>

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Guenter Roeck Dec. 31, 2023, 6:12 p.m. UTC | #2 
On Sat, Dec 23, 2023 at 11:21:58AM -0500, Abdel Alkuor wrote:
> as6200 is a temperature sensor with a range between -40°C to
> 125°C degrees and an accuracy of ±0.4°C degree between 0
> and 65°C and ±1°C for the other ranges.
> 
> Signed-off-by: Abdel Alkuor <alkuor@gmail.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Applied.

Thanks,
Guenter
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml
index 0b69897f0c63..ed269e428a3d 100644
--- a/Documentation/devicetree/bindings/hwmon/lm75.yaml
+++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml
@@ -14,6 +14,7 @@  properties:
   compatible:
     enum:
       - adi,adt75
+      - ams,as6200
       - atmel,at30ts74
       - dallas,ds1775
       - dallas,ds75
@@ -48,10 +49,28 @@  properties:
   vs-supply:
     description: phandle to the regulator that provides the +VS supply
 
+  interrupts:
+    maxItems: 1
+
 required:
   - compatible
   - reg
 
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - ams,as6200
+                - ti,tmp100
+                - ti,tmp101
+                - ti,tmp112
+    then:
+      properties:
+        interrupts: false
+
 additionalProperties: false
 
 examples:
@@ -66,3 +85,17 @@  examples:
         vs-supply = <&vs>;
       };
     };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      temperature-sensor@48 {
+        compatible = "ams,as6200";
+        reg = <0x48>;
+        vs-supply = <&vs>;
+        interrupt-parent = <&gpio1>;
+        interrupts = <17 IRQ_TYPE_EDGE_BOTH>;
+      };
+    };