[v1] thermal: sun8i: extend H6 calibration function to support 4 sensors
Commit Message
The H616 SoC resembles the H6 thermal sensor controller, with a few
changes like four sensors.
Extend sun50i_h6_ths_calibrate() function to support calibration of
these sensors.
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
---
drivers/thermal/sun8i_thermal.c | 28 ++++++++++++++++++++--------
1 file changed, 20 insertions(+), 8 deletions(-)
Comments
On Sun, 17 Dec 2023 16:36:36 +0300
Maksim Kiselev <bigunclemax@gmail.com> wrote:
Hi Maksim,
many thanks for sending this!
> The H616 SoC resembles the H6 thermal sensor controller, with a few
> changes like four sensors.
>
> Extend sun50i_h6_ths_calibrate() function to support calibration of
> these sensors.
Oh wow, I didn't expect that, but it's indeed that simple: we just need to
cater for the 4th sensor's data to be cramped into the other bits, the
rest is exactly the same! Well spotted!
> Signed-off-by: Martin Botka <martin.botka@somainline.org>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
I don't think the Signed-off-by:s are accurate here. Please replace those
two with just:
Co-developed-by: Martin Botka <martin.botka@somainline.org>
(I didn't really do anything in those parts)
> Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
I compared the two routines and came to the same solution as you, so:
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
I will incorporate this patch into the next submission of the H616 THS
series, so there is no need to merge this patch as is.
Cheers,
Andre
> ---
> drivers/thermal/sun8i_thermal.c | 28 ++++++++++++++++++++--------
> 1 file changed, 20 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
> index f989b55a8aa8..9af95b4785be 100644
> --- a/drivers/thermal/sun8i_thermal.c
> +++ b/drivers/thermal/sun8i_thermal.c
> @@ -221,16 +221,21 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
> struct device *dev = tmdev->dev;
> int i, ft_temp;
>
> - if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num)
> + if (!caldata[0])
> return -EINVAL;
>
> /*
> * efuse layout:
> *
> - * 0 11 16 32
> - * +-------+-------+-------+
> - * |temp| |sensor0|sensor1|
> - * +-------+-------+-------+
> + * 0 11 16 27 32 43 48 57
> + * +----------+-----------+-----------+-----------+
> + * | temp | |sensor0| |sensor1| |sensor2| |
> + * +----------+-----------+-----------+-----------+
> + * ^ ^ ^
> + * | | |
> + * | | sensor3[11:8]
> + * | sensor3[7:4]
> + * sensor3[3:0]
> *
> * The calibration data on the H6 is the ambient temperature and
> * sensor values that are filled during the factory test stage.
> @@ -243,9 +248,16 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
> ft_temp = (caldata[0] & FT_TEMP_MASK) * 100;
>
> for (i = 0; i < tmdev->chip->sensor_num; i++) {
> - int sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
> - int cdata, offset;
> - int sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
> + int sensor_reg, sensor_temp, cdata, offset;
> +
> + if (i == 3)
> + sensor_reg = (caldata[1] >> 12)
> + | ((caldata[2] >> 12) << 4)
> + | ((caldata[3] >> 12) << 8);
> + else
> + sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
> +
> + sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
>
> /*
> * Calibration data is CALIBRATE_DEFAULT - (calculated
On Mon, Dec 18, 2023 at 11:14:04AM +0000, Andre Przywara wrote:
[ ... ]
> I will incorporate this patch into the next submission of the H616 THS
> series, so there is no need to merge this patch as is.
Noted, thanks
-- Daniel
[ ... ]
@@ -221,16 +221,21 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
struct device *dev = tmdev->dev;
int i, ft_temp;
- if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num)
+ if (!caldata[0])
return -EINVAL;
/*
* efuse layout:
*
- * 0 11 16 32
- * +-------+-------+-------+
- * |temp| |sensor0|sensor1|
- * +-------+-------+-------+
+ * 0 11 16 27 32 43 48 57
+ * +----------+-----------+-----------+-----------+
+ * | temp | |sensor0| |sensor1| |sensor2| |
+ * +----------+-----------+-----------+-----------+
+ * ^ ^ ^
+ * | | |
+ * | | sensor3[11:8]
+ * | sensor3[7:4]
+ * sensor3[3:0]
*
* The calibration data on the H6 is the ambient temperature and
* sensor values that are filled during the factory test stage.
@@ -243,9 +248,16 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
ft_temp = (caldata[0] & FT_TEMP_MASK) * 100;
for (i = 0; i < tmdev->chip->sensor_num; i++) {
- int sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
- int cdata, offset;
- int sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
+ int sensor_reg, sensor_temp, cdata, offset;
+
+ if (i == 3)
+ sensor_reg = (caldata[1] >> 12)
+ | ((caldata[2] >> 12) << 4)
+ | ((caldata[3] >> 12) << 8);
+ else
+ sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
+
+ sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
/*
* Calibration data is CALIBRATE_DEFAULT - (calculated