diff mbox series

ext4: fix inconsistent between segment fstrim and full fstrim

Message ID 20231214064635.4128391-1-yebin10@huawei.com
State New
Headers
Series ext4: fix inconsistent between segment fstrim and full fstrim |

Commit Message

Ye Bin Dec. 14, 2023, 6:46 a.m. UTC 
  There will not issue discard cmd when do segment fstrim for ext4 fs, however,
if full fstrim for the same fs will issue discard cmd.
Above issue may happens as follows:
Precondition:
1. Fstrim range [0, 15] and [16, 31];
2. Discard granularity is 16;
            Range1          Range2
      1111000000000000 0000111010101011
There's no free space length large or equal than 16 in 'Range1' or 'Range2'.
As ext4_try_to_trim_range() only search free space among range which user
specified. However, there's maximum free space length 16 in 'Range1'+ 'Range2'.
To solve above issue, we need to find the longest free space to discard.

Signed-off-by: Ye Bin <yebin10@huawei.com>
---
 fs/ext4/mballoc.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

Comments

Jan Kara Dec. 14, 2023, 8:58 a.m. UTC | #1 
On Thu 14-12-23 14:46:35, Ye Bin wrote:
> There will not issue discard cmd when do segment fstrim for ext4 fs, however,
> if full fstrim for the same fs will issue discard cmd.
> Above issue may happens as follows:
> Precondition:
> 1. Fstrim range [0, 15] and [16, 31];
> 2. Discard granularity is 16;
>             Range1          Range2
>       1111000000000000 0000111010101011
> There's no free space length large or equal than 16 in 'Range1' or 'Range2'.
> As ext4_try_to_trim_range() only search free space among range which user
> specified. However, there's maximum free space length 16 in 'Range1'+ 'Range2'.
> To solve above issue, we need to find the longest free space to discard.
> 
> Signed-off-by: Ye Bin <yebin10@huawei.com>

OK, I agree that there is this behavioral difference. However is that a
practical problem? I mean I would not expect the range to be particularly
small, rather something like 1GB and then these boundary conditions don't
really matter. This is also sensible so that we can properly track whether
the whole block group was trimmed or not. Finally I'd also argue that
trimming outside of specified range might be unexpected for the user. So a
*fix* for this in my opinion lays in userspace which needs to select
sensible ranges to use for trimming.

								Honza

> ---
>  fs/ext4/mballoc.c | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
> index d72b5e3c92ec..d195461123d8 100644
> --- a/fs/ext4/mballoc.c
> +++ b/fs/ext4/mballoc.c
> @@ -6753,13 +6753,15 @@ static int ext4_try_to_trim_range(struct super_block *sb,
>  __acquires(ext4_group_lock_ptr(sb, e4b->bd_group))
>  __releases(ext4_group_lock_ptr(sb, e4b->bd_group))
>  {
> -	ext4_grpblk_t next, count, free_count;
> +	ext4_grpblk_t next, count, free_count, last, origin_start;
>  	bool set_trimmed = false;
>  	void *bitmap;
>  
> +	last = ext4_last_grp_cluster(sb, e4b->bd_group);
>  	bitmap = e4b->bd_bitmap;
> -	if (start == 0 && max >= ext4_last_grp_cluster(sb, e4b->bd_group))
> +	if (start == 0 && max >= last)
>  		set_trimmed = true;
> +	origin_start = start;
>  	start = max(e4b->bd_info->bb_first_free, start);
>  	count = 0;
>  	free_count = 0;
> @@ -6768,7 +6770,10 @@ __releases(ext4_group_lock_ptr(sb, e4b->bd_group))
>  		start = mb_find_next_zero_bit(bitmap, max + 1, start);
>  		if (start > max)
>  			break;
> -		next = mb_find_next_bit(bitmap, max + 1, start);
> +
> +		next = mb_find_next_bit(bitmap, last + 1, start);
> +		if (origin_start == 0 && next >= last)
> +			set_trimmed = true;
>  
>  		if ((next - start) >= minblocks) {
>  			int ret = ext4_trim_extent(sb, start, next - start, e4b);
> -- 
> 2.31.1
>
Ye Bin Dec. 14, 2023, 1:06 p.m. UTC | #2 
On 2023/12/14 16:58, Jan Kara wrote:
> On Thu 14-12-23 14:46:35, Ye Bin wrote:
>> There will not issue discard cmd when do segment fstrim for ext4 fs, however,
>> if full fstrim for the same fs will issue discard cmd.
>> Above issue may happens as follows:
>> Precondition:
>> 1. Fstrim range [0, 15] and [16, 31];
>> 2. Discard granularity is 16;
>>              Range1          Range2
>>        1111000000000000 0000111010101011
>> There's no free space length large or equal than 16 in 'Range1' or 'Range2'.
>> As ext4_try_to_trim_range() only search free space among range which user
>> specified. However, there's maximum free space length 16 in 'Range1'+ 'Range2'.
>> To solve above issue, we need to find the longest free space to discard.
>>
>> Signed-off-by: Ye Bin <yebin10@huawei.com>
> OK, I agree that there is this behavioral difference. However is that a
> practical problem? I mean I would not expect the range to be particularly
> small, rather something like 1GB and then these boundary conditions don't
> really matter. This is also sensible so that we can properly track whether
> the whole block group was trimmed or not. Finally I'd also argue that
> trimming outside of specified range might be unexpected for the user. So a
> *fix* for this in my opinion lays in userspace which needs to select
> sensible ranges to use for trimming.
>
> 								Honza
Thanks for your reply.
Our product fstrim entire file system, found to take a long time, thus 
affecting other processes.
So they want to segment the file system fstrim based on the IO of the 
system. But they found
that fragmented fstrims didn't work the same as fstrim  for the entire 
file system.
Users do not know the distribution of free blocks in the file system, 
and they do not know the
reasonable range. The user's simple perception is that the effect of 
segmented fstrim and full
fstrim should be consistent.
I researched the implementation of fstrim on the XFS file system, and 
for the scenario described
in my patch, the results of both operations are consistent.
>> ---
>>   fs/ext4/mballoc.c | 11 ++++++++---
>>   1 file changed, 8 insertions(+), 3 deletions(-)
>>
>> diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
>> index d72b5e3c92ec..d195461123d8 100644
>> --- a/fs/ext4/mballoc.c
>> +++ b/fs/ext4/mballoc.c
>> @@ -6753,13 +6753,15 @@ static int ext4_try_to_trim_range(struct super_block *sb,
>>   __acquires(ext4_group_lock_ptr(sb, e4b->bd_group))
>>   __releases(ext4_group_lock_ptr(sb, e4b->bd_group))
>>   {
>> -	ext4_grpblk_t next, count, free_count;
>> +	ext4_grpblk_t next, count, free_count, last, origin_start;
>>   	bool set_trimmed = false;
>>   	void *bitmap;
>>   
>> +	last = ext4_last_grp_cluster(sb, e4b->bd_group);
>>   	bitmap = e4b->bd_bitmap;
>> -	if (start == 0 && max >= ext4_last_grp_cluster(sb, e4b->bd_group))
>> +	if (start == 0 && max >= last)
>>   		set_trimmed = true;
>> +	origin_start = start;
>>   	start = max(e4b->bd_info->bb_first_free, start);
>>   	count = 0;
>>   	free_count = 0;
>> @@ -6768,7 +6770,10 @@ __releases(ext4_group_lock_ptr(sb, e4b->bd_group))
>>   		start = mb_find_next_zero_bit(bitmap, max + 1, start);
>>   		if (start > max)
>>   			break;
>> -		next = mb_find_next_bit(bitmap, max + 1, start);
>> +
>> +		next = mb_find_next_bit(bitmap, last + 1, start);
>> +		if (origin_start == 0 && next >= last)
>> +			set_trimmed = true;
>>   
>>   		if ((next - start) >= minblocks) {
>>   			int ret = ext4_trim_extent(sb, start, next - start, e4b);
>> -- 
>> 2.31.1
>>
Jan Kara Dec. 15, 2023, 11:11 a.m. UTC | #3 
On Thu 14-12-23 21:06:46, yebin (H) wrote:
> 
> 
> On 2023/12/14 16:58, Jan Kara wrote:
> > On Thu 14-12-23 14:46:35, Ye Bin wrote:
> > > There will not issue discard cmd when do segment fstrim for ext4 fs, however,
> > > if full fstrim for the same fs will issue discard cmd.
> > > Above issue may happens as follows:
> > > Precondition:
> > > 1. Fstrim range [0, 15] and [16, 31];
> > > 2. Discard granularity is 16;
> > >              Range1          Range2
> > >        1111000000000000 0000111010101011
> > > There's no free space length large or equal than 16 in 'Range1' or 'Range2'.
> > > As ext4_try_to_trim_range() only search free space among range which user
> > > specified. However, there's maximum free space length 16 in 'Range1'+ 'Range2'.
> > > To solve above issue, we need to find the longest free space to discard.
> > > 
> > > Signed-off-by: Ye Bin <yebin10@huawei.com>
> > OK, I agree that there is this behavioral difference. However is that a
> > practical problem? I mean I would not expect the range to be particularly
> > small, rather something like 1GB and then these boundary conditions don't
> > really matter. This is also sensible so that we can properly track whether
> > the whole block group was trimmed or not. Finally I'd also argue that
> > trimming outside of specified range might be unexpected for the user. So a
> > *fix* for this in my opinion lays in userspace which needs to select
> > sensible ranges to use for trimming.
> > 
> > 								Honza
> Thanks for your reply.
> Our product fstrim entire file system, found to take a long time, thus
> affecting other processes.
> So they want to segment the file system fstrim based on the IO of the
> system. But they found
> that fragmented fstrims didn't work the same as fstrim  for the entire file
> system.
> Users do not know the distribution of free blocks in the file system, and
> they do not know the
> reasonable range. The user's simple perception is that the effect of
> segmented fstrim and full
> fstrim should be consistent.
> I researched the implementation of fstrim on the XFS file system, and for
> the scenario described
> in my patch, the results of both operations are consistent.

OK, we've discussed this on yesterday's ext4 call and we've came to a
conclusion that we don't care that much and consistency among filesystems
is good so I'll go back and review your patch.

								Honza
Jan Kara Dec. 15, 2023, 11:32 a.m. UTC | #4 
Remembered one more thing to note:

On Fri 15-12-23 12:11:08, Jan Kara wrote:
> On Thu 14-12-23 21:06:46, yebin (H) wrote:
> > On 2023/12/14 16:58, Jan Kara wrote:
> > > On Thu 14-12-23 14:46:35, Ye Bin wrote:
> > > > There will not issue discard cmd when do segment fstrim for ext4 fs, however,
> > > > if full fstrim for the same fs will issue discard cmd.
> > > > Above issue may happens as follows:
> > > > Precondition:
> > > > 1. Fstrim range [0, 15] and [16, 31];
> > > > 2. Discard granularity is 16;
> > > >              Range1          Range2
> > > >        1111000000000000 0000111010101011
> > > > There's no free space length large or equal than 16 in 'Range1' or 'Range2'.
> > > > As ext4_try_to_trim_range() only search free space among range which user
> > > > specified. However, there's maximum free space length 16 in 'Range1'+ 'Range2'.
> > > > To solve above issue, we need to find the longest free space to discard.
> > > > 
> > > > Signed-off-by: Ye Bin <yebin10@huawei.com>
> > > OK, I agree that there is this behavioral difference. However is that a
> > > practical problem? I mean I would not expect the range to be particularly
> > > small, rather something like 1GB and then these boundary conditions don't
> > > really matter. This is also sensible so that we can properly track whether
> > > the whole block group was trimmed or not. Finally I'd also argue that
> > > trimming outside of specified range might be unexpected for the user. So a
> > > *fix* for this in my opinion lays in userspace which needs to select
> > > sensible ranges to use for trimming.
> > > 
> > > 								Honza
> > Thanks for your reply.
>
> > Our product fstrim entire file system, found to take a long time, thus
> > affecting other processes.  So they want to segment the file system
> > fstrim based on the IO of the system. But they found that fragmented
> > fstrims didn't work the same as fstrim  for the entire file system.

So I agree that trimming the whole fs at once may take too long. But also
note that if you make ranges smaller than block group size (128MB with 4k
block size), then we will never record that the group has been fully
trimmed and thus we will always trim all free extents in a group even
though there was no allocation there since the last trim. So in this sense
trims split to small ranges will not be equivalent to a large trim even
after your change.

> > Users do not know the distribution of free blocks in the file system,
> > and they do not know the reasonable range. The user's simple perception
> > is that the effect of segmented fstrim and full fstrim should be
> > consistent.

Personally I don't see a good reason to make trim range smaller than 1GB,
it just adds overhead, but I understand it may be a bit surprising.

								Honza
Jan Kara Dec. 15, 2023, 11:41 a.m. UTC | #5 
On Thu 14-12-23 14:46:35, Ye Bin wrote:
> There will not issue discard cmd when do segment fstrim for ext4 fs, however,
> if full fstrim for the same fs will issue discard cmd.
> Above issue may happens as follows:
> Precondition:
> 1. Fstrim range [0, 15] and [16, 31];
> 2. Discard granularity is 16;
>             Range1          Range2
>       1111000000000000 0000111010101011
> There's no free space length large or equal than 16 in 'Range1' or 'Range2'.
> As ext4_try_to_trim_range() only search free space among range which user
> specified. However, there's maximum free space length 16 in 'Range1'+ 'Range2'.
> To solve above issue, we need to find the longest free space to discard.

The patch looks good so feel free to add:

Reviewed-by: Jan Kara <jack@suse.cz>

I'd just rephrase the changelog to make it a bit easier to read:

Suppose we issue two FITRIM ioctls for ranges [0,15] and [16,31] with
mininum length of trimmed range set to 8 blocks. If we have say a range of
blocks 10-22 free, this range will not be trimmed because it straddles the
boundary of the two FITRIM ranges and neither part is big enough. This is a
bit surprising to some users that call FITRIM on smaller ranges of blocks
to limit impact on the system. Also XFS trims all free space extents that
overlap with the specified range so we are inconsistent among filesystems.
Let's change ext4_try_to_trim_range() to consider for trimming the whole
free space extent that straddles the end of specified range, not just the
part of it within the range.

								Honza
 
> Signed-off-by: Ye Bin <yebin10@huawei.com>
> ---
>  fs/ext4/mballoc.c | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
> index d72b5e3c92ec..d195461123d8 100644
> --- a/fs/ext4/mballoc.c
> +++ b/fs/ext4/mballoc.c
> @@ -6753,13 +6753,15 @@ static int ext4_try_to_trim_range(struct super_block *sb,
>  __acquires(ext4_group_lock_ptr(sb, e4b->bd_group))
>  __releases(ext4_group_lock_ptr(sb, e4b->bd_group))
>  {
> -	ext4_grpblk_t next, count, free_count;
> +	ext4_grpblk_t next, count, free_count, last, origin_start;
>  	bool set_trimmed = false;
>  	void *bitmap;
>  
> +	last = ext4_last_grp_cluster(sb, e4b->bd_group);
>  	bitmap = e4b->bd_bitmap;
> -	if (start == 0 && max >= ext4_last_grp_cluster(sb, e4b->bd_group))
> +	if (start == 0 && max >= last)
>  		set_trimmed = true;
> +	origin_start = start;
>  	start = max(e4b->bd_info->bb_first_free, start);
>  	count = 0;
>  	free_count = 0;
> @@ -6768,7 +6770,10 @@ __releases(ext4_group_lock_ptr(sb, e4b->bd_group))
>  		start = mb_find_next_zero_bit(bitmap, max + 1, start);
>  		if (start > max)
>  			break;
> -		next = mb_find_next_bit(bitmap, max + 1, start);
> +
> +		next = mb_find_next_bit(bitmap, last + 1, start);
> +		if (origin_start == 0 && next >= last)
> +			set_trimmed = true;
>  
>  		if ((next - start) >= minblocks) {
>  			int ret = ext4_trim_extent(sb, start, next - start, e4b);
> -- 
> 2.31.1
>
Ye Bin Dec. 16, 2023, 1:01 a.m. UTC | #6 
On 2023/12/15 19:41, Jan Kara wrote:
> On Thu 14-12-23 14:46:35, Ye Bin wrote:
>> There will not issue discard cmd when do segment fstrim for ext4 fs, however,
>> if full fstrim for the same fs will issue discard cmd.
>> Above issue may happens as follows:
>> Precondition:
>> 1. Fstrim range [0, 15] and [16, 31];
>> 2. Discard granularity is 16;
>>              Range1          Range2
>>        1111000000000000 0000111010101011
>> There's no free space length large or equal than 16 in 'Range1' or 'Range2'.
>> As ext4_try_to_trim_range() only search free space among range which user
>> specified. However, there's maximum free space length 16 in 'Range1'+ 'Range2'.
>> To solve above issue, we need to find the longest free space to discard.
> The patch looks good so feel free to add:
>
> Reviewed-by: Jan Kara <jack@suse.cz>
>
> I'd just rephrase the changelog to make it a bit easier to read:
>
> Suppose we issue two FITRIM ioctls for ranges [0,15] and [16,31] with
> mininum length of trimmed range set to 8 blocks. If we have say a range of
> blocks 10-22 free, this range will not be trimmed because it straddles the
> boundary of the two FITRIM ranges and neither part is big enough. This is a
> bit surprising to some users that call FITRIM on smaller ranges of blocks
> to limit impact on the system. Also XFS trims all free space extents that
> overlap with the specified range so we are inconsistent among filesystems.
> Let's change ext4_try_to_trim_range() to consider for trimming the whole
> free space extent that straddles the end of specified range, not just the
> part of it within the range.
>
> 								Honza
>   
Thank you very much for your clear explanation of the patch.  I'll 
update patch's
changelog and resend a version.
>> Signed-off-by: Ye Bin <yebin10@huawei.com>
>> ---
>>   fs/ext4/mballoc.c | 11 ++++++++---
>>   1 file changed, 8 insertions(+), 3 deletions(-)
>>
>> diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
>> index d72b5e3c92ec..d195461123d8 100644
>> --- a/fs/ext4/mballoc.c
>> +++ b/fs/ext4/mballoc.c
>> @@ -6753,13 +6753,15 @@ static int ext4_try_to_trim_range(struct super_block *sb,
>>   __acquires(ext4_group_lock_ptr(sb, e4b->bd_group))
>>   __releases(ext4_group_lock_ptr(sb, e4b->bd_group))
>>   {
>> -	ext4_grpblk_t next, count, free_count;
>> +	ext4_grpblk_t next, count, free_count, last, origin_start;
>>   	bool set_trimmed = false;
>>   	void *bitmap;
>>   
>> +	last = ext4_last_grp_cluster(sb, e4b->bd_group);
>>   	bitmap = e4b->bd_bitmap;
>> -	if (start == 0 && max >= ext4_last_grp_cluster(sb, e4b->bd_group))
>> +	if (start == 0 && max >= last)
>>   		set_trimmed = true;
>> +	origin_start = start;
>>   	start = max(e4b->bd_info->bb_first_free, start);
>>   	count = 0;
>>   	free_count = 0;
>> @@ -6768,7 +6770,10 @@ __releases(ext4_group_lock_ptr(sb, e4b->bd_group))
>>   		start = mb_find_next_zero_bit(bitmap, max + 1, start);
>>   		if (start > max)
>>   			break;
>> -		next = mb_find_next_bit(bitmap, max + 1, start);
>> +
>> +		next = mb_find_next_bit(bitmap, last + 1, start);
>> +		if (origin_start == 0 && next >= last)
>> +			set_trimmed = true;
>>   
>>   		if ((next - start) >= minblocks) {
>>   			int ret = ext4_trim_extent(sb, start, next - start, e4b);
>> -- 
>> 2.31.1
>>
diff mbox series

Patch

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index d72b5e3c92ec..d195461123d8 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -6753,13 +6753,15 @@  static int ext4_try_to_trim_range(struct super_block *sb,
 __acquires(ext4_group_lock_ptr(sb, e4b->bd_group))
 __releases(ext4_group_lock_ptr(sb, e4b->bd_group))
 {
-	ext4_grpblk_t next, count, free_count;
+	ext4_grpblk_t next, count, free_count, last, origin_start;
 	bool set_trimmed = false;
 	void *bitmap;
 
+	last = ext4_last_grp_cluster(sb, e4b->bd_group);
 	bitmap = e4b->bd_bitmap;
-	if (start == 0 && max >= ext4_last_grp_cluster(sb, e4b->bd_group))
+	if (start == 0 && max >= last)
 		set_trimmed = true;
+	origin_start = start;
 	start = max(e4b->bd_info->bb_first_free, start);
 	count = 0;
 	free_count = 0;
@@ -6768,7 +6770,10 @@  __releases(ext4_group_lock_ptr(sb, e4b->bd_group))
 		start = mb_find_next_zero_bit(bitmap, max + 1, start);
 		if (start > max)
 			break;
-		next = mb_find_next_bit(bitmap, max + 1, start);
+
+		next = mb_find_next_bit(bitmap, last + 1, start);
+		if (origin_start == 0 && next >= last)
+			set_trimmed = true;
 
 		if ((next - start) >= minblocks) {
 			int ret = ext4_trim_extent(sb, start, next - start, e4b);