[v2,09/11] arm64: renesas: r9a08g045: Add the Ethernet nodes
Commit Message
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Add the Ethernet nodes available on RZ/G3S (R9A08G045).
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---
Changes in v2:
- added phy-mode = "rgmii" and #address-cells, #size-cells for both
Ethernet nodes
arch/arm64/boot/dts/renesas/r9a08g045.dtsi | 38 ++++++++++++++++++++++
1 file changed, 38 insertions(+)
Comments
On Thu, Dec 7, 2023 at 8:08 AM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> Add the Ethernet nodes available on RZ/G3S (R9A08G045).
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> ---
>
> Changes in v2:
> - added phy-mode = "rgmii" and #address-cells, #size-cells for both
> Ethernet nodes
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v6.8.
Gr{oetje,eeting}s,
Geert
@@ -149,6 +149,44 @@ sdhi2: mmc@11c20000 {
status = "disabled";
};
+ eth0: ethernet@11c30000 {
+ compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
+ reg = <0 0x11c30000 0 0x10000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mux", "fil", "arp_ns";
+ phy-mode = "rgmii";
+ clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>,
+ <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>,
+ <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>;
+ clock-names = "axi", "chi", "refclk";
+ resets = <&cpg R9A08G045_ETH0_RST_HW_N>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ eth1: ethernet@11c40000 {
+ compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
+ reg = <0 0x11c40000 0 0x10000>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mux", "fil", "arp_ns";
+ phy-mode = "rgmii";
+ clocks = <&cpg CPG_MOD R9A08G045_ETH1_CLK_AXI>,
+ <&cpg CPG_MOD R9A08G045_ETH1_CLK_CHI>,
+ <&cpg CPG_MOD R9A08G045_ETH1_REFCLK>;
+ clock-names = "axi", "chi", "refclk";
+ resets = <&cpg R9A08G045_ETH1_RST_HW_N>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@12400000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;