diff mbox series

[v3,5/5] ARM: dts: marvell: make dts use gpio-fan matrix instead of array

Message ID 20231202222934.137191-5-david@ixit.cz
State New
Headers
Series [v3,1/5] dt-bindings: arm: hwmon: gpio-fan: Convert txt bindings to yaml |

Commit Message

David Heidelberg Dec. 2, 2023, 10:29 p.m. UTC 
  No functional changes.

Adjust to comply with dt-schema requirements
and make possible to validate values.

Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
---
 arch/arm/boot/dts/marvell/armada-370-rd.dts   |   2 +-
 .../marvell/armada-370-seagate-nas-2bay.dts   |   8 +-
 .../marvell/armada-370-seagate-nas-4bay.dts   |   8 +-
 .../marvell/armada-370-synology-ds213j.dts    |  16 +--
 .../dts/marvell/armada-385-synology-ds116.dts |  16 +--
 arch/arm/boot/dts/marvell/armada-388-gp.dts   |   4 +-
 arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi |   6 +-
 .../marvell/kirkwood-linkstation-6282.dtsi    |   9 +-
 .../marvell/kirkwood-linkstation-lswxl.dts    |   9 +-
 arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi  |   9 +-
 arch/arm/boot/dts/marvell/kirkwood-ns2max.dts |  18 ++--
 .../arm/boot/dts/marvell/kirkwood-ns2mini.dts |  18 ++--
 .../boot/dts/marvell/kirkwood-synology.dtsi   | 102 +++++++++---------
 .../dts/marvell/mvebu-linkstation-fan.dtsi    |   8 +-
 14 files changed, 121 insertions(+), 112 deletions(-)

Comments

Andrew Lunn Dec. 2, 2023, 10:42 p.m. UTC | #1 
On Sat, Dec 02, 2023 at 11:29:04PM +0100, David Heidelberg wrote:
> No functional changes.
> 
> Adjust to comply with dt-schema requirements
> and make possible to validate values.
> 
> Acked-by: Simon Guinot <simon.guinot@sequanux.org>
> Signed-off-by: David Heidelberg <david@ixit.cz>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
Gregory CLEMENT Dec. 8, 2023, 3:33 p.m. UTC | #2 
David Heidelberg <david@ixit.cz> writes:

> No functional changes.
>
> Adjust to comply with dt-schema requirements
> and make possible to validate values.
>
> Acked-by: Simon Guinot <simon.guinot@sequanux.org>
> Signed-off-by: David Heidelberg <david@ixit.cz>

Applied on mvebu/dt

Thanks,

Gregory
> ---
>  arch/arm/boot/dts/marvell/armada-370-rd.dts   |   2 +-
>  .../marvell/armada-370-seagate-nas-2bay.dts   |   8 +-
>  .../marvell/armada-370-seagate-nas-4bay.dts   |   8 +-
>  .../marvell/armada-370-synology-ds213j.dts    |  16 +--
>  .../dts/marvell/armada-385-synology-ds116.dts |  16 +--
>  arch/arm/boot/dts/marvell/armada-388-gp.dts   |   4 +-
>  arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi |   6 +-
>  .../marvell/kirkwood-linkstation-6282.dtsi    |   9 +-
>  .../marvell/kirkwood-linkstation-lswxl.dts    |   9 +-
>  arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi  |   9 +-
>  arch/arm/boot/dts/marvell/kirkwood-ns2max.dts |  18 ++--
>  .../arm/boot/dts/marvell/kirkwood-ns2mini.dts |  18 ++--
>  .../boot/dts/marvell/kirkwood-synology.dtsi   | 102 +++++++++---------
>  .../dts/marvell/mvebu-linkstation-fan.dtsi    |   8 +-
>  14 files changed, 121 insertions(+), 112 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/marvell/armada-370-rd.dts b/arch/arm/boot/dts/marvell/armada-370-rd.dts
index b459a670f615..4b5789b73dac 100644
--- a/arch/arm/boot/dts/marvell/armada-370-rd.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-rd.dts
@@ -95,7 +95,7 @@  button {
 			gpio-fan {
 				compatible = "gpio-fan";
 				gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-				gpio-fan,speed-map = <0 0 3000 1>;
+				gpio-fan,speed-map = <0 0>, <3000 1>;
 				pinctrl-0 = <&fan_pins>;
 				pinctrl-names = "default";
 			};
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
index 8dd242e668e6..6ec3dd3337f4 100644
--- a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
@@ -25,9 +25,9 @@  / {
 
 	gpio-fan {
 		gpio-fan,speed-map =
-			<   0 3
-			  950 2
-			 1400 1
-			 1800 0>;
+			<   0 3>,
+			< 950 2>,
+			<1400 1>,
+			<1800 0>;
 	};
 };
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
index 370ca9c43247..3011578a3124 100644
--- a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
@@ -106,10 +106,10 @@  NS_V2_LED_ON   1 0
 
 	gpio-fan {
 		gpio-fan,speed-map =
-			<   0 3
-			  800 2
-			  1050 1
-			  1300 0>;
+			<   0 3>,
+			< 800 2>,
+			<1050 1>,
+			<1300 0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
index b07d11d1f124..02599a3e9816 100644
--- a/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
@@ -113,14 +113,14 @@  gpio-fan-32-38 {
 			 &gpio2  0 GPIO_ACTIVE_HIGH
 			 &gpio2  1 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       1000 1
-				       1150 2
-				       1350 4
-				       1500 3
-				       1650 5
-				       1750 6
-				       1900 7 >;
+		gpio-fan,speed-map = <   0 0>,
+				     <1000 1>,
+				     <1150 2>,
+				     <1350 4>,
+				     <1500 3>,
+				     <1650 5>,
+				     <1750 6>,
+				     <1900 7>;
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts b/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
index ea91ff964d94..6caa5c50175a 100644
--- a/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
@@ -131,14 +131,14 @@  gpio-fan {
 			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
 				<&gpio1 17 GPIO_ACTIVE_HIGH>,
 				<&gpio1 16 GPIO_ACTIVE_HIGH>;
-			gpio-fan,speed-map = <   0 0
-					      1500 1
-					      2500 2
-					      3000 3
-					      3400 4
-					      3700 5
-					      3900 6
-					      4000 7>;
+			gpio-fan,speed-map = <   0 0>,
+					     <1500 1>,
+					     <2500 2>,
+					     <3000 3>,
+					     <3400 4>,
+					     <3700 5>,
+					     <3900 6>,
+					     <4000 7>;
 			#cooling-cells = <2>;
 		};
 
diff --git a/arch/arm/boot/dts/marvell/armada-388-gp.dts b/arch/arm/boot/dts/marvell/armada-388-gp.dts
index e2ba50520b6b..1de0a172aa5f 100644
--- a/arch/arm/boot/dts/marvell/armada-388-gp.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-gp.dts
@@ -237,8 +237,8 @@  pcie@3,0 {
 		gpio-fan {
 			compatible = "gpio-fan";
 			gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
-			gpio-fan,speed-map = <	 0 0
-					      3000 1>;
+			gpio-fan,speed-map = <	 0 0>,
+					     <3000 1>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
index eb917462b219..0738eb679fcd 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
@@ -38,9 +38,9 @@  gpio_fan {
 		pinctrl-names = "default";
 		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
 			 &gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0    0
-				      3000 1
-				      6000 2>;
+		gpio-fan,speed-map = <0    0>,
+				     <3000 1>,
+				     <6000 2>;
 	};
 
 	gpio_poweroff {
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
index 377b6e970259..dfac2045a1eb 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
@@ -118,10 +118,11 @@  gpio_fan {
 		gpios = <&gpio0 17 GPIO_ACTIVE_LOW
 			 &gpio0 16 GPIO_ACTIVE_LOW>;
 
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
+		gpio-fan,speed-map =
+				<   0 3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 
 		alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
index c6024b569423..0425df8cb91c 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
@@ -69,10 +69,11 @@  gpio_fan {
 		gpios = <&gpio1 16 GPIO_ACTIVE_LOW
 			 &gpio1 15 GPIO_ACTIVE_LOW>;
 
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
+		gpio-fan,speed-map =
+				<   0 3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 
 		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
index 88b70ba1c8fe..f80af24b9e90 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
@@ -172,10 +172,11 @@  gpio_fan {
 		pinctrl-names = "default";
 		gpios = <&gpio0 19 GPIO_ACTIVE_LOW
 		         &gpio0 18 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map = <0    3
-		                      1500 2
-		                      3250 1
-		                      5000 0>;
+		gpio-fan,speed-map =
+				<0    3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
 
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
index c0a087e77408..044958bc55da 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
@@ -29,15 +29,15 @@  &gpio0  7 GPIO_ACTIVE_LOW
 			 &gpio1  1 GPIO_ACTIVE_LOW
 			 &gpio0 23 GPIO_ACTIVE_LOW>;
 		gpio-fan,speed-map =
-			<   0  0
-			 1500 15
-			 1700 14
-			 1800 13
-			 2100 12
-			 3100 11
-			 3300 10
-			 4300  9
-			 5500  8>;
+			<   0  0>,
+			<1500 15>,
+			<1700 14>,
+			<1800 13>,
+			<2100 12>,
+			<3100 11>,
+			<3300 10>,
+			<4300  9>,
+			<5500  8>;
 		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 	};
 
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
index 5b9fa14b6428..3fbe008f9141 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
@@ -30,15 +30,15 @@  &gpio0  7 GPIO_ACTIVE_LOW
 			 &gpio1  1 GPIO_ACTIVE_LOW
 			 &gpio0 23 GPIO_ACTIVE_LOW>;
 		gpio-fan,speed-map =
-			<   0  0
-			 3000 15
-			 3180 14
-			 4140 13
-			 4570 12
-			 6760 11
-			 7140 10
-			 7980  9
-			 9200  8>;
+			<   0  0>,
+			<3000 15>,
+			<3180 14>,
+			<4140 13>,
+			<4570 12>,
+			<6760 11>,
+			<7140 10>,
+			<7980  9>,
+			<9200  8>;
 		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 	};
 
diff --git a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
index 9b6666020cdd..20964eb48fd7 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
@@ -286,14 +286,15 @@  gpio-fan-150-32-35 {
 		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
 			 &gpio1 1 GPIO_ACTIVE_HIGH
 			 &gpio1 2 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2200 1>,
+				<2500 2>,
+				<3000 4>,
+				<3300 3>,
+				<3700 5>,
+				<3800 6>,
+				<4200 7>;
 	};
 
 	gpio-fan-150-15-18 {
@@ -306,14 +307,15 @@  gpio-fan-150-15-18 {
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2200 1>,
+				<2500 2>,
+				<3000 4>,
+				<3300 3>,
+				<3700 5>,
+				<3800 6>,
+				<4200 7>;
 	};
 
 	gpio-fan-100-32-35 {
@@ -326,14 +328,15 @@  gpio-fan-100-32-35 {
 			 &gpio1 1 GPIO_ACTIVE_HIGH
 			 &gpio1 2 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-18 {
@@ -346,14 +349,15 @@  gpio-fan-100-15-18 {
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-35-1 {
@@ -366,14 +370,15 @@  gpio-fan-100-15-35-1 {
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-35-3 {
@@ -388,14 +393,15 @@  &gpio0 16 GPIO_ACTIVE_HIGH
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
 			       &gpio1 12 GPIO_ACTIVE_HIGH
 			       &gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-leds-alarm-12 {
diff --git a/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
index e172029a0c4d..a260c42dbda3 100644
--- a/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
+++ b/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
@@ -50,10 +50,10 @@  gpio_fan {
 		pinctrl-names = "default";
 
 		gpio-fan,speed-map =
-			<0		3
-			1500	2
-			3250	1
-			5000	0>;
+			<   0 3>,
+			<1500 2>,
+			<3250 1>,
+			<5000 0>;
 	};
 };