[1/3] dt-bindings: power: supply: Add Acer Aspire 1 EC
Commit Message
Add binding for the EC found in the Acer Aspire 1 laptop.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
---
.../bindings/power/supply/acer,aspire1-ec.yaml | 73 ++++++++++++++++++++++
1 file changed, 73 insertions(+)
Comments
On 07/12/2023 12:20, Nikita Travkin wrote:
> Add binding for the EC found in the Acer Aspire 1 laptop.
>
> Signed-off-by: Nikita Travkin <nikita@trvn.ru>
> ---
> .../bindings/power/supply/acer,aspire1-ec.yaml | 73 ++++++++++++++++++++++
> 1 file changed, 73 insertions(+)
>
> +
> + acer,media-keys-on-top:
> + description: Configure the keyboard layout to use media features of
> + the fn row when the fn key is not pressed. The firmware may choose
> + to add this property when user selects the fn mode in the firmware
> + setup utility.
> + type: boolean
> +
> + connector:
> + $ref: /schemas/connector/usb-connector.yaml#
> +
> + properties:
> + reg:
> + maxItems: 1
You cannot have it... Add it to the example and see the results.
> +
> + unevaluatedProperties: false
It should be fine to drop this as well, so you don't need anything else
than $ref.
Best regards,
Krzysztof
Krzysztof Kozlowski писал(а) 07.12.2023 21:56:
> On 07/12/2023 12:20, Nikita Travkin wrote:
>> Add binding for the EC found in the Acer Aspire 1 laptop.
>>
>> Signed-off-by: Nikita Travkin <nikita@trvn.ru>
>> ---
>> .../bindings/power/supply/acer,aspire1-ec.yaml | 73 ++++++++++++++++++++++
>> 1 file changed, 73 insertions(+)
>>
>
>
>> +
>> + acer,media-keys-on-top:
>> + description: Configure the keyboard layout to use media features of
>> + the fn row when the fn key is not pressed. The firmware may choose
>> + to add this property when user selects the fn mode in the firmware
>> + setup utility.
>> + type: boolean
>> +
>> + connector:
>> + $ref: /schemas/connector/usb-connector.yaml#
>> +
>> + properties:
>> + reg:
>> + maxItems: 1
>
> You cannot have it... Add it to the example and see the results.
>
Gah, I had connector@0 at first with all the num-cells etc,
later simplified it, but missed this part...
>> +
>> + unevaluatedProperties: false
>
> It should be fine to drop this as well, so you don't need anything else
> than $ref.
>
Will drop this too then.
Thanks!
Nikita
>
>
> Best regards,
> Krzysztof
new file mode 100644
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/acer,aspire1-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Acer Aspire 1 Embedded Controller
+
+maintainers:
+ - Nikita Travkin <nikita@trvn.ru>
+
+description:
+ The Acer Aspire 1 laptop uses an embedded controller to control battery
+ and charging as well as to provide a set of misc features such as the
+ laptop lid status and HPD events for the USB Type-C DP alt mode.
+
+properties:
+ compatible:
+ const: acer,aspire1-ec
+
+ reg:
+ const: 0x76
+
+ interrupts:
+ maxItems: 1
+
+ acer,media-keys-on-top:
+ description: Configure the keyboard layout to use media features of
+ the fn row when the fn key is not pressed. The firmware may choose
+ to add this property when user selects the fn mode in the firmware
+ setup utility.
+ type: boolean
+
+ connector:
+ $ref: /schemas/connector/usb-connector.yaml#
+
+ properties:
+ reg:
+ maxItems: 1
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |+
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ embedded-controller@76 {
+ compatible = "acer,aspire1-ec";
+ reg = <0x76>;
+
+ interrupts-extended = <&tlmm 30 IRQ_TYPE_LEVEL_LOW>;
+
+ connector {
+ compatible = "usb-c-connector";
+
+ port {
+ ec_dp_in: endpoint {
+ remote-endpoint = <&mdss_dp_out>;
+ };
+ };
+ };
+ };
+ };