[2/2] ALSA: hda/tas2563: Add tas2563 HDA driver
Commit Message
Create tas2563 side codec HDA driver for Lenovo Yoga 7 14ARB7 laptops.
It has two smart amplifiers that can load firmware (tuning file) and
calibration data. The calibration data can be read from EFI variables.
All of the tas2563s in the laptop will be aggregated as one audio
speaker. The code supports realtek codec as the primary codec.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
---
include/sound/tas2562.h | 5 +
sound/pci/hda/Kconfig | 14 +
sound/pci/hda/Makefile | 2 +
sound/pci/hda/patch_realtek.c | 22 +-
sound/pci/hda/tas2563_hda_i2c.c | 508 ++++++++++++++++++++++++++++++++
5 files changed, 547 insertions(+), 4 deletions(-)
create mode 100644 sound/pci/hda/tas2563_hda_i2c.c
Comments
> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
> index 9677c09cf7a9..1d3e9f77c9d4 100644
> --- a/sound/pci/hda/patch_realtek.c
> +++ b/sound/pci/hda/patch_realtek.c
> @@ -6770,7 +6770,7 @@ static int comp_match_cs35l41_dev_name(struct device *dev, void *data)
> return !strcmp(d + n, tmp);
> }
>
> -static int comp_match_tas2781_dev_name(struct device *dev,
> +static int comp_match_tas2xxx_dev_name(struct device *dev,
> void *data)
> {
> struct scodec_dev_name *p = data;
> @@ -6823,7 +6823,7 @@ static void cs35l41_generic_fixup(struct hda_codec *cdc, int action, const char
> }
> }
>
> -static void tas2781_generic_fixup(struct hda_codec *cdc, int action,
> +static void tas2xxx_generic_fixup(struct hda_codec *cdc, int action,
> const char *bus, const char *hid)
> {
> struct device *dev = hda_codec_dev(cdc);
> @@ -6841,7 +6841,7 @@ static void tas2781_generic_fixup(struct hda_codec *cdc, int action,
> rec->index = 0;
> spec->comps[0].codec = cdc;
> component_match_add(dev, &spec->match,
> - comp_match_tas2781_dev_name, rec);
> + comp_match_tas2xxx_dev_name, rec);
> ret = component_master_add_with_match(dev, &comp_master_ops,
> spec->match);
> if (ret)
> @@ -6888,7 +6888,13 @@ static void alc287_fixup_legion_16ithg6_speakers(struct hda_codec *cdc, const st
> static void tas2781_fixup_i2c(struct hda_codec *cdc,
> const struct hda_fixup *fix, int action)
> {
> - tas2781_generic_fixup(cdc, action, "i2c", "TIAS2781");
> + tas2xxx_generic_fixup(cdc, action, "i2c", "TIAS2781");
> +}
this sort of rename should be part of a separate patch IMHO, it'd be
easier to review.
> +
> +static void tas2563_fixup_i2c(struct hda_codec *cdc,
> + const struct hda_fixup *fix, int action)
> +{
> + tas2xxx_generic_fixup(cdc, action, "i2c", "INT8866");
Any specific reason to use an Intel ACPI identifier? Why not use
"TIAS2563" ?
> +#define TAS2563_REG_INIT_N 12
newline
> +static const struct reg_default tas2563_reg_init[TAS2563_MAX_CHANNELS]
> + [TAS2563_REG_INIT_N] = {
> + {
> + { TAS2562_TDM_CFG2, 0x5a },
> + { TAS2562_TDM_CFG4, 0xf3 },
> + { TAS2562_TDM_CFG5, 0x42 },
> + { TAS2562_TDM_CFG6, 0x40 },
> + { TAS2562_BOOST_CFG1, 0xd4 },
> + { TAS2562_BOOST_CFG3, 0xa4 },
> + { TAS2562_REG(0x00, 0x36), 0x0b },
> + { TAS2562_REG(0x00, 0x38), 0x21 },
> + { TAS2562_REG(0x00, 0x3c), 0x58 },
> + { TAS2562_BOOST_CFG4, 0xb6 },
> + { TAS2562_ASI_CONFIG3, 0x04},
> + { TAS2562_REG(0x00, 0x47), 0xb1 },
> +/* Update the calibrate data, including speaker impedance, f0, etc, into algo.
update the calibration data,
> + * Calibrate data is done by manufacturer in the factory. These data are used
The manufacturer calibrates the data in the factory.
> + * by Algo for calucating the speaker temperature, speaker membrance excursion
calculating
membrane
> +static int tas2563_hda_i2c_probe(struct i2c_client *client)
> +{
> + struct tas2563_data *tas2563;
> + int ret;
> +
> + tas2563 = devm_kzalloc(&client->dev, sizeof(struct tas2563_data),
> + GFP_KERNEL);
> + if (!tas2563)
> + return -ENOMEM;
> + tas2563->dev = &client->dev;
> + tas2563->client = client;
> +
> + dev_set_drvdata(tas2563->dev, tas2563);
> +
> + ret = tas2563_read_acpi(tas2563);
> + if (ret)
> + return dev_err_probe(tas2563->dev, ret,
> + "Platform not supported\n");
> +
> + for (int i = 0; i < tas2563->ndev; ++i) {
> + struct tas2563_dev *tasdev = &tas2563->tasdevs[i];
> +
> + ret = tas2563_tasdev_read_efi(tas2563, tasdev);
> + if (ret)
> + return dev_err_probe(tas2563->dev, ret,
> + "Calibration data cannot be read from EFI\n");
> +
> + ret = tas2563_tasdev_init_client(tas2563, tasdev);
> + if (ret)
> + return dev_err_probe(tas2563->dev, ret,
> + "Failed to init i2c client\n");
> +
> + ret = tas2563_tasdev_init_regmap(tas2563, tasdev);
> + if (ret)
> + return dev_err_probe(tas2563->dev, ret,
> + "Failed to allocate register map\n");
> + }
> +
> + ret = component_add(tas2563->dev, &tas2563_hda_comp_ops);
> + if (ret) {
> + return dev_err_probe(tas2563->dev, ret,
> + "Register component failed\n");
> + }
I wonder how many of those tests actually depend on deferred probe, and
if this isn't a case of copy-paste "just in case"?
> +
> + pm_runtime_set_autosuspend_delay(tas2563->dev, 3000);
> + pm_runtime_use_autosuspend(tas2563->dev);
> + pm_runtime_mark_last_busy(tas2563->dev);
> + pm_runtime_set_active(tas2563->dev);
> + pm_runtime_get_noresume(tas2563->dev);
> + pm_runtime_enable(tas2563->dev);
> +
> + pm_runtime_put_autosuspend(tas2563->dev);
the sequence get_noresume/enable/put_autosuspend makes no sense to me.
doing a get_noresume *before* enable should do exactly nothing, and
releasing the resource would already be handled with autosuspend based
on the last_busy mark.
> +
> + return 0;
> +}
> +
> +static void tas2563_hda_i2c_remove(struct i2c_client *client)
> +{
> + struct tas2563_data *tas2563 = dev_get_drvdata(&client->dev);
> +
> + pm_runtime_get_sync(tas2563->dev);
> + pm_runtime_disable(tas2563->dev);
> +
> + component_del(tas2563->dev, &tas2563_hda_comp_ops);
> +
> + pm_runtime_put_noidle(tas2563->dev);
that pm_runtime sequence also makes no sense to me, if you disable
pm_runtime the last command is useless/no-op.
> +}
> +
> +static int tas2563_system_suspend(struct device *dev)
> +{
> + struct tas2563_data *tas2563 = dev_get_drvdata(dev);
> + int ret;
> +
> + dev_dbg(tas2563->dev, "System Suspend\n");
> +
> + ret = pm_runtime_force_suspend(dev);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int tas2563_system_resume(struct device *dev)
> +{
> + int ret;
> + struct tas2563_data *tas2563 = dev_get_drvdata(dev);
> +
> + dev_dbg(tas2563->dev, "System Resume\n");
> +
> + ret = pm_runtime_force_resume(dev);
> + if (ret)
> + return ret;
> +
> + for (int i = 0; i < tas2563->ndev; ++i)
> + tas2563_tasdev_setup(tas2563, &tas2563->tasdevs[i]);
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops tas2563_hda_pm_ops = {
> + SYSTEM_SLEEP_PM_OPS(tas2563_system_suspend, tas2563_system_resume)
where's the pm_runtime stuff?
> +};
Hi Pierre-Louis,
On Mon, 2023-12-04 at 18:22 -0600, Pierre-Louis Bossart wrote:
>
>
> >
> > - tas2781_generic_fixup(cdc, action, "i2c", "TIAS2781");
> > + tas2xxx_generic_fixup(cdc, action, "i2c", "TIAS2781");
> > +}
>
> this sort of rename should be part of a separate patch IMHO, it'd be
> easier to review.
>
Okey.
> > +
> > +static void tas2563_fixup_i2c(struct hda_codec *cdc,
> > + const struct hda_fixup *fix, int action)
> > +{
> > + tas2xxx_generic_fixup(cdc, action, "i2c", "INT8866");
>
> Any specific reason to use an Intel ACPI identifier? Why not use
> "TIAS2563" ?
>
INT8866 is in the ACPI.
I don't know why Lenovo uses this name.
I think it's more internal than intel.
Scope (_SB.I2CD)
{
Device (TAS)
{
Name (_HID, "INT8866") // _HID: Hardware ID
Name (_UID, Zero) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource
Settings
{
Name (RBUF, ResourceTemplate ()
{
I2cSerialBusV2 (0x004C, ControllerInitiated,
0x00061A80,
AddressingMode7Bit, "\\_SB.I2CD",
0x00, ResourceConsumer, , Exclusive,
)
I2cSerialBusV2 (0x004D, ControllerInitiated,
0x00061A80,
AddressingMode7Bit, "\\_SB.I2CD",
0x00, ResourceConsumer, , Exclusive,
)
GpioInt (Edge, ActiveLow, SharedAndWake, PullNone,
0x0000,
"\\_SB.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0020
}
})
Return (RBUF) /* \_SB_.I2CD.TAS_._CRS.RBUF */
}
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
}
> > +#define TAS2563_REG_INIT_N 12
>
> newline
>
> > +static const struct reg_default tas2563_reg_init[TAS2563_MAX_CHANNELS]
> > + [TAS2563_REG_INIT_N] = {
> > + {
> > + { TAS2562_TDM_CFG2, 0x5a },
> > + { TAS2562_TDM_CFG4, 0xf3 },
> > + { TAS2562_TDM_CFG5, 0x42 },
> > + { TAS2562_TDM_CFG6, 0x40 },
> > + { TAS2562_BOOST_CFG1, 0xd4 },
> > + { TAS2562_BOOST_CFG3, 0xa4 },
> > + { TAS2562_REG(0x00, 0x36), 0x0b },
> > + { TAS2562_REG(0x00, 0x38), 0x21 },
> > + { TAS2562_REG(0x00, 0x3c), 0x58 },
> > + { TAS2562_BOOST_CFG4, 0xb6 },
> > + { TAS2562_ASI_CONFIG3, 0x04},
> > + { TAS2562_REG(0x00, 0x47), 0xb1 },
>
> > +/* Update the calibrate data, including speaker impedance, f0, etc, into algo.
>
> update the calibration data,
>
> > + * Calibrate data is done by manufacturer in the factory. These data are used
>
> The manufacturer calibrates the data in the factory.
>
> > + * by Algo for calucating the speaker temperature, speaker membrance excursion
>
> calculating
>
> membrane
>
>
> > +static int tas2563_hda_i2c_probe(struct i2c_client *client)
> > +{
> > + struct tas2563_data *tas2563;
> > + int ret;
> > +
> > + tas2563 = devm_kzalloc(&client->dev, sizeof(struct tas2563_data),
> > + GFP_KERNEL);
> > + if (!tas2563)
> > + return -ENOMEM;
> > + tas2563->dev = &client->dev;
> > + tas2563->client = client;
> > +
> > + dev_set_drvdata(tas2563->dev, tas2563);
> > +
> > + ret = tas2563_read_acpi(tas2563);
> > + if (ret)
> > + return dev_err_probe(tas2563->dev, ret,
> > + "Platform not supported\n");
> > +
> > + for (int i = 0; i < tas2563->ndev; ++i) {
> > + struct tas2563_dev *tasdev = &tas2563->tasdevs[i];
> > +
> > + ret = tas2563_tasdev_read_efi(tas2563, tasdev);
> > + if (ret)
> > + return dev_err_probe(tas2563->dev, ret,
> > + "Calibration data cannot be read from EFI\n");
> > +
> > + ret = tas2563_tasdev_init_client(tas2563, tasdev);
> > + if (ret)
> > + return dev_err_probe(tas2563->dev, ret,
> > + "Failed to init i2c client\n");
> > +
> > + ret = tas2563_tasdev_init_regmap(tas2563, tasdev);
> > + if (ret)
> > + return dev_err_probe(tas2563->dev, ret,
> > + "Failed to allocate register map\n");
> > + }
> > +
> > + ret = component_add(tas2563->dev, &tas2563_hda_comp_ops);
> > + if (ret) {
> > + return dev_err_probe(tas2563->dev, ret,
> > + "Register component failed\n");
> > + }
>
> I wonder how many of those tests actually depend on deferred probe, and
> if this isn't a case of copy-paste "just in case"?
>
> > +
> > + pm_runtime_set_autosuspend_delay(tas2563->dev, 3000);
> > + pm_runtime_use_autosuspend(tas2563->dev);
> > + pm_runtime_mark_last_busy(tas2563->dev);
> > + pm_runtime_set_active(tas2563->dev);
> > + pm_runtime_get_noresume(tas2563->dev);
> > + pm_runtime_enable(tas2563->dev);
> > +
> > + pm_runtime_put_autosuspend(tas2563->dev);
>
> the sequence get_noresume/enable/put_autosuspend makes no sense to me.
> doing a get_noresume *before* enable should do exactly nothing, and
> releasing the resource would already be handled with autosuspend based
> on the last_busy mark.
>
I copied this from the tas2781-hda driver, I'll dig into this more.
> > +
> > + return 0;
> > +}
> > +
> > +static void tas2563_hda_i2c_remove(struct i2c_client *client)
> > +{
> > + struct tas2563_data *tas2563 = dev_get_drvdata(&client->dev);
> > +
> > + pm_runtime_get_sync(tas2563->dev);
> > + pm_runtime_disable(tas2563->dev);
> > +
> > + component_del(tas2563->dev, &tas2563_hda_comp_ops);
> > +
> > + pm_runtime_put_noidle(tas2563->dev);
>
> that pm_runtime sequence also makes no sense to me, if you disable
> pm_runtime the last command is useless/no-op.
>
> > +}
> > +
> > +static int tas2563_system_suspend(struct device *dev)
> > +{
> > + struct tas2563_data *tas2563 = dev_get_drvdata(dev);
> > + int ret;
> > +
> > + dev_dbg(tas2563->dev, "System Suspend\n");
> > +
> > + ret = pm_runtime_force_suspend(dev);
> > + if (ret)
> > + return ret;
> > +
> > + return 0;
> > +}
> > +
> > +static int tas2563_system_resume(struct device *dev)
> > +{
> > + int ret;
> > + struct tas2563_data *tas2563 = dev_get_drvdata(dev);
> > +
> > + dev_dbg(tas2563->dev, "System Resume\n");
> > +
> > + ret = pm_runtime_force_resume(dev);
> > + if (ret)
> > + return ret;
> > +
> > + for (int i = 0; i < tas2563->ndev; ++i)
> > + tas2563_tasdev_setup(tas2563, &tas2563->tasdevs[i]);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct dev_pm_ops tas2563_hda_pm_ops = {
> > + SYSTEM_SLEEP_PM_OPS(tas2563_system_suspend, tas2563_system_resume)
>
> where's the pm_runtime stuff?
>
The amp stores its state in software shutdown mode.
The tas2563_hda_playback_hook wakes/shutdowns the amp, not the
pm_runtime.
> > +};
>
Regards,
Gergo
>>> +
>>> +static void tas2563_fixup_i2c(struct hda_codec *cdc,
>>> + const struct hda_fixup *fix, int action)
>>> +{
>>> + tas2xxx_generic_fixup(cdc, action, "i2c", "INT8866");
>>
>> Any specific reason to use an Intel ACPI identifier? Why not use
>> "TIAS2563" ?
>>
> INT8866 is in the ACPI.
> I don't know why Lenovo uses this name.
> I think it's more internal than intel.
>
> Scope (_SB.I2CD)
> {
> Device (TAS)
> {
> Name (_HID, "INT8866") // _HID: Hardware ID
Ouch, I hope they checked with Intel that this isn't an HID already in
use...
> Name (_UID, Zero) // _UID: Unique ID
> Method (_CRS, 0, NotSerialized) // _CRS: Current Resource
> Settings
> {
> Name (RBUF, ResourceTemplate ()
> {
> I2cSerialBusV2 (0x004C, ControllerInitiated,
> 0x00061A80,
> AddressingMode7Bit, "\\_SB.I2CD",
> 0x00, ResourceConsumer, , Exclusive,
> )
> I2cSerialBusV2 (0x004D, ControllerInitiated,
> 0x00061A80,
> AddressingMode7Bit, "\\_SB.I2CD",
> 0x00, ResourceConsumer, , Exclusive,
> )
> GpioInt (Edge, ActiveLow, SharedAndWake, PullNone,
> 0x0000,
> "\\_SB.GPIO", 0x00, ResourceConsumer, ,
> )
> { // Pin list
> 0x0020
> }
> })
> Return (RBUF) /* \_SB_.I2CD.TAS_._CRS.RBUF */
> }
>
> Method (_STA, 0, NotSerialized) // _STA: Status
> {
> Return (0x0F)
> }
> }
> }
>>> +static int tas2563_system_resume(struct device *dev)
>>> +{
>>> + int ret;
>>> + struct tas2563_data *tas2563 = dev_get_drvdata(dev);
>>> +
>>> + dev_dbg(tas2563->dev, "System Resume\n");
>>> +
>>> + ret = pm_runtime_force_resume(dev);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + for (int i = 0; i < tas2563->ndev; ++i)
>>> + tas2563_tasdev_setup(tas2563, &tas2563->tasdevs[i]);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static const struct dev_pm_ops tas2563_hda_pm_ops = {
>>> + SYSTEM_SLEEP_PM_OPS(tas2563_system_suspend, tas2563_system_resume)
>>
>> where's the pm_runtime stuff?
>>
>
> The amp stores its state in software shutdown mode.
> The tas2563_hda_playback_hook wakes/shutdowns the amp, not the
> pm_runtime.
My point was that you have all these pm_runtime_ calls in the code, but
nothing that provides pm_runtime suspend-resume functions so not sure
what exactly the result is?
>>>> +static const struct dev_pm_ops tas2563_hda_pm_ops = {
>>>> + SYSTEM_SLEEP_PM_OPS(tas2563_system_suspend, tas2563_system_resume)
>>>
>>> where's the pm_runtime stuff?
>>>
>>
>> The amp stores its state in software shutdown mode.
>> The tas2563_hda_playback_hook wakes/shutdowns the amp, not the
>> pm_runtime.
>
> My point was that you have all these pm_runtime_ calls in the code, but
> nothing that provides pm_runtime suspend-resume functions so not sure
> what exactly the result is?
if the inspiration was the tas2781, then see below it does have a
RUNTIME_PM_OPS line as well as runtime_suspend/resume routines.
static const struct dev_pm_ops tas2781_hda_pm_ops = {
RUNTIME_PM_OPS(tas2781_runtime_suspend, tas2781_runtime_resume, NULL)
SYSTEM_SLEEP_PM_OPS(tas2781_system_suspend, tas2781_system_resume)
};
On Tue, Dec 05, 2023 at 10:01:08AM -0600, Pierre-Louis Bossart wrote:
> >>> +static const struct dev_pm_ops tas2563_hda_pm_ops = {
> >>> + SYSTEM_SLEEP_PM_OPS(tas2563_system_suspend, tas2563_system_resume)
> >> where's the pm_runtime stuff?
> > The amp stores its state in software shutdown mode.
> > The tas2563_hda_playback_hook wakes/shutdowns the amp, not the
> > pm_runtime.
> My point was that you have all these pm_runtime_ calls in the code, but
> nothing that provides pm_runtime suspend-resume functions so not sure
> what exactly the result is?
It *could* be ACPI doing something I guess...
On Tue, 2023-12-05 at 10:01 -0600, Pierre-Louis Bossart wrote:
> > > > +
> > > > +static void tas2563_fixup_i2c(struct hda_codec *cdc,
> > > > + const struct hda_fixup *fix, int action)
> > > > +{
> > > > + tas2xxx_generic_fixup(cdc, action, "i2c", "INT8866");
> > >
> > > Any specific reason to use an Intel ACPI identifier? Why not use
> > > "TIAS2563" ?
> > >
> > INT8866 is in the ACPI.
> > I don't know why Lenovo uses this name.
> > I think it's more internal than intel.
> >
> > Scope (_SB.I2CD)
> > {
> > Device (TAS)
> > {
> > Name (_HID, "INT8866") // _HID: Hardware ID
>
> Ouch, I hope they checked with Intel that this isn't an HID already in
> use...
>
It looks the INT prefix is not reserved. (yet)
https://uefi.org/ACPI_ID_List?acpi_search=INT
> >
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static const struct dev_pm_ops tas2563_hda_pm_ops = {
> > > > + SYSTEM_SLEEP_PM_OPS(tas2563_system_suspend, tas2563_system_resume)
> > >
> > > where's the pm_runtime stuff?
> > >
> >
> > The amp stores its state in software shutdown mode.
> > The tas2563_hda_playback_hook wakes/shutdowns the amp, not the
> > pm_runtime.
>
> My point was that you have all these pm_runtime_ calls in the code, but
> nothing that provides pm_runtime suspend-resume functions so not sure
> what exactly the result is?
>
>
I think nothing. I haven't experienced anything unusual recently.
>>>>> +static void tas2563_fixup_i2c(struct hda_codec *cdc,
>>>>> + const struct hda_fixup *fix, int action)
>>>>> +{
>>>>> + tas2xxx_generic_fixup(cdc, action, "i2c", "INT8866");
>>>>
>>>> Any specific reason to use an Intel ACPI identifier? Why not use
>>>> "TIAS2563" ?
>>>>
>>> INT8866 is in the ACPI.
>>> I don't know why Lenovo uses this name.
>>> I think it's more internal than intel.
>>>
>>> Scope (_SB.I2CD)
>>> {
>>> Device (TAS)
>>> {
>>> Name (_HID, "INT8866") // _HID: Hardware ID
>>
>> Ouch, I hope they checked with Intel that this isn't an HID already in
>> use...
>>
> It looks the INT prefix is not reserved. (yet)
> https://uefi.org/ACPI_ID_List?acpi_search=INT
It's been de-facto reclaimed by Intel over the years, apparently using
INTC or INTL was too hard for some of my colleagues...
There are lots of INT devices in the kernel today, here's a small list
for sound/soc/codecs only
rt274.c: { "INT34C2", 0 },
rt286.c: { "INT343A", 0 },
rt298.c: { "INT343A", 0 },
ssm4567.c: { "INT343B", 0 },
Those INT values were added by Intel teams though, it's really odd to
see Lenovo use an INT-based HID. Should really use 104C2563 or something.
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static const struct dev_pm_ops tas2563_hda_pm_ops = {
>>>>> + SYSTEM_SLEEP_PM_OPS(tas2563_system_suspend, tas2563_system_resume)
>>>>
>>>> where's the pm_runtime stuff?
>>>>
>>>
>>> The amp stores its state in software shutdown mode.
>>> The tas2563_hda_playback_hook wakes/shutdowns the amp, not the
>>> pm_runtime.
>>
>> My point was that you have all these pm_runtime_ calls in the code, but
>> nothing that provides pm_runtime suspend-resume functions so not sure
>> what exactly the result is?
>>
>>
> I think nothing. I haven't experienced anything unusual recently.
you can probably see from the /sys directory what the pm_runtime power
state is, most likely the status is 'unknown'.
On 12/5/2023 6:22 PM, Pierre-Louis Bossart wrote:
>
>
>>>>>> +static void tas2563_fixup_i2c(struct hda_codec *cdc,
>>>>>> + const struct hda_fixup *fix, int action)
>>>>>> +{
>>>>>> + tas2xxx_generic_fixup(cdc, action, "i2c", "INT8866");
>>>>>
>>>>> Any specific reason to use an Intel ACPI identifier? Why not use
>>>>> "TIAS2563" ?
>>>>>
Will just note that prefix should probably be TXNW (not TIAS) as
discussed recently on list.
>>>> INT8866 is in the ACPI.
>>>> I don't know why Lenovo uses this name.
>>>> I think it's more internal than intel.
>>>>
>>>> Scope (_SB.I2CD)
>>>> {
>>>> Device (TAS)
>>>> {
>>>> Name (_HID, "INT8866") // _HID: Hardware ID
>>>
>>> Ouch, I hope they checked with Intel that this isn't an HID already in
>>> use...
>>>
>> It looks the INT prefix is not reserved. (yet)
>> https://uefi.org/ACPI_ID_List?acpi_search=INT
>
> It's been de-facto reclaimed by Intel over the years, apparently using
> INTC or INTL was too hard for some of my colleagues...
>
Perhaps it should be reserved then, so it is present on above list?
> There are lots of INT devices in the kernel today, here's a small list
> for sound/soc/codecs only
>
> rt274.c: { "INT34C2", 0 },
> rt286.c: { "INT343A", 0 },
> rt298.c: { "INT343A", 0 },
> ssm4567.c: { "INT343B", 0 },
>
> Those INT values were added by Intel teams though, it's really odd to
> see Lenovo use an INT-based HID. Should really use 104C2563 or something.
I will just note that those RT ones are used on quite old RVPs, and yes
I would have also preferred if they had used "real" IDs, but it is
unlikely that anyone fixes it after all this time ;).
Adding Andy to CC, as he commented recently about problematic
assignments of ACPI IDs on this list, maybe he can shed some light on
the "INT" prefix.
On Wed, Dec 06, 2023 at 05:07:16PM +0100, Amadeusz Sławiński wrote:
> On 12/5/2023 6:22 PM, Pierre-Louis Bossart wrote:
...
> > > > > > > + tas2xxx_generic_fixup(cdc, action, "i2c", "INT8866");
> > > > > >
> > > > > > Any specific reason to use an Intel ACPI identifier? Why not use
> > > > > > "TIAS2563" ?
>
> Will just note that prefix should probably be TXNW (not TIAS) as discussed
> recently on list.
...which should come directly from TI as it's their responsibility to allocate
an ACPI ID.
...
> > > > > INT8866 is in the ACPI.
> > > > > I don't know why Lenovo uses this name.
> > > > > I think it's more internal than intel.
This is wrong (PNP) ID.
...
> > > > > Name (_HID, "INT8866") // _HID: Hardware ID
> > > >
> > > > Ouch, I hope they checked with Intel that this isn't an HID already in
> > > > use...
> > > >
> > > It looks the INT prefix is not reserved. (yet)
> > > https://uefi.org/ACPI_ID_List?acpi_search=INT
You are looking into wrong registry, and yeah, Intel used wrong PNP ID
for years...
> > It's been de-facto reclaimed by Intel over the years, apparently using
> > INTC or INTL was too hard for some of my colleagues...
>
> Perhaps it should be reserved then, so it is present on above list?
Hi Gergo,
kernel test robot noticed the following build warnings:
[auto build test WARNING on ffc253263a1375a65fa6c9f62a893e9767fbebfa]
url: https://github.com/intel-lab-lkp/linux/commits/Gergo-Koteles/ASoc-tas2563-DSP-Firmware-loading-support/20231205-074901
base: ffc253263a1375a65fa6c9f62a893e9767fbebfa
patch link: https://lore.kernel.org/r/4a2f31d4eb8479789ceb1daf2e93ec0e25c23171.1701733441.git.soyer%40irl.hu
patch subject: [PATCH 2/2] ALSA: hda/tas2563: Add tas2563 HDA driver
config: x86_64-randconfig-r121-20231210 (https://download.01.org/0day-ci/archive/20231210/202312100942.CvTnDpkg-lkp@intel.com/config)
compiler: gcc-11 (Debian 11.3.0-12) 11.3.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231210/202312100942.CvTnDpkg-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202312100942.CvTnDpkg-lkp@intel.com/
sparse warnings: (new ones prefixed by >>)
>> sound/soc/codecs/tas25xx-dsp.c:21:9: sparse: sparse: restricted __be16 degrades to integer
>> sound/soc/codecs/tas25xx-dsp.c:21:9: sparse: sparse: incorrect type in initializer (different base types) @@ expected unsigned long __ms @@ got restricted __be16 [usertype] @@
sound/soc/codecs/tas25xx-dsp.c:21:9: sparse: expected unsigned long __ms
sound/soc/codecs/tas25xx-dsp.c:21:9: sparse: got restricted __be16 [usertype]
>> sound/soc/codecs/tas25xx-dsp.c:21:9: sparse: sparse: restricted __be16 degrades to integer
>> sound/soc/codecs/tas25xx-dsp.c:21:9: sparse: sparse: restricted __be16 degrades to integer
>> sound/soc/codecs/tas25xx-dsp.c:21:9: sparse: sparse: restricted __be16 degrades to integer
>> sound/soc/codecs/tas25xx-dsp.c:21:9: sparse: sparse: restricted __be16 degrades to integer
>> sound/soc/codecs/tas25xx-dsp.c:28:26: sparse: sparse: incorrect type in initializer (different base types) @@ expected int num_writes @@ got restricted __be16 [usertype] @@
sound/soc/codecs/tas25xx-dsp.c:28:26: sparse: expected int num_writes
sound/soc/codecs/tas25xx-dsp.c:28:26: sparse: got restricted __be16 [usertype]
>> sound/soc/codecs/tas25xx-dsp.c:65:33: sparse: sparse: incorrect type in argument 4 (different base types) @@ expected unsigned long [usertype] val_count @@ got restricted __be16 [usertype] @@
sound/soc/codecs/tas25xx-dsp.c:65:33: sparse: expected unsigned long [usertype] val_count
sound/soc/codecs/tas25xx-dsp.c:65:33: sparse: got restricted __be16 [usertype]
sound/soc/codecs/tas25xx-dsp.c:84:30: sparse: sparse: restricted __be16 degrades to integer
sound/soc/codecs/tas25xx-dsp.c:87:30: sparse: sparse: restricted __be16 degrades to integer
sound/soc/codecs/tas25xx-dsp.c:82:17: sparse: sparse: restricted __be16 degrades to integer
sound/soc/codecs/tas25xx-dsp.c:82:17: sparse: sparse: restricted __be16 degrades to integer
sound/soc/codecs/tas25xx-dsp.c:82:17: sparse: sparse: restricted __be16 degrades to integer
sound/soc/codecs/tas25xx-dsp.c:103:17: sparse: sparse: restricted __be16 degrades to integer
sound/soc/codecs/tas25xx-dsp.c:103:17: sparse: sparse: restricted __be16 degrades to integer
sound/soc/codecs/tas25xx-dsp.c:103:17: sparse: sparse: restricted __be16 degrades to integer
>> sound/soc/codecs/tas25xx-dsp.c:141:24: sparse: sparse: restricted __be32 degrades to integer
>> sound/soc/codecs/tas25xx-dsp.c:145:24: sparse: sparse: invalid assignment: +=
>> sound/soc/codecs/tas25xx-dsp.c:145:24: sparse: left side has type int
>> sound/soc/codecs/tas25xx-dsp.c:145:24: sparse: right side has type restricted __be32
sound/soc/codecs/tas25xx-dsp.c:150:35: sparse: sparse: restricted __be32 degrades to integer
>> sound/soc/codecs/tas25xx-dsp.c:151:29: sparse: sparse: incorrect type in initializer (different base types) @@ expected int num_subblocks @@ got restricted __be32 [usertype] @@
sound/soc/codecs/tas25xx-dsp.c:151:29: sparse: expected int num_subblocks
sound/soc/codecs/tas25xx-dsp.c:151:29: sparse: got restricted __be32 [usertype]
sound/soc/codecs/tas25xx-dsp.c:182:26: sparse: sparse: restricted __be32 degrades to integer
sound/soc/codecs/tas25xx-dsp.c:186:24: sparse: sparse: invalid assignment: +=
sound/soc/codecs/tas25xx-dsp.c:186:24: sparse: left side has type int
sound/soc/codecs/tas25xx-dsp.c:186:24: sparse: right side has type restricted __be32
sound/soc/codecs/tas25xx-dsp.c:191:35: sparse: sparse: restricted __be32 degrades to integer
sound/soc/codecs/tas25xx-dsp.c:192:29: sparse: sparse: incorrect type in initializer (different base types) @@ expected int num_subblocks @@ got restricted __be32 [usertype] @@
sound/soc/codecs/tas25xx-dsp.c:192:29: sparse: expected int num_subblocks
sound/soc/codecs/tas25xx-dsp.c:192:29: sparse: got restricted __be32 [usertype]
sound/soc/codecs/tas25xx-dsp.c:238:29: sparse: sparse: restricted __be32 degrades to integer
sound/soc/codecs/tas25xx-dsp.c:239:31: sparse: sparse: invalid assignment: +=
>> sound/soc/codecs/tas25xx-dsp.c:239:31: sparse: left side has type unsigned int
sound/soc/codecs/tas25xx-dsp.c:239:31: sparse: right side has type restricted __be32
sound/soc/codecs/tas25xx-dsp.c:241:29: sparse: sparse: restricted __be32 degrades to integer
sound/soc/codecs/tas25xx-dsp.c:242:33: sparse: sparse: invalid assignment: +=
sound/soc/codecs/tas25xx-dsp.c:242:33: sparse: left side has type unsigned int
sound/soc/codecs/tas25xx-dsp.c:242:33: sparse: right side has type restricted __be32
>> sound/soc/codecs/tas25xx-dsp.c:260:18: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned int [usertype] prog_num @@ got restricted __be32 [usertype] @@
sound/soc/codecs/tas25xx-dsp.c:260:18: sparse: expected unsigned int [usertype] prog_num
sound/soc/codecs/tas25xx-dsp.c:260:18: sparse: got restricted __be32 [usertype]
>> sound/soc/codecs/tas25xx-dsp.c:261:20: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned int [usertype] config_num @@ got restricted __be32 [usertype] @@
sound/soc/codecs/tas25xx-dsp.c:261:20: sparse: expected unsigned int [usertype] config_num
sound/soc/codecs/tas25xx-dsp.c:261:20: sparse: got restricted __be32 [usertype]
--
>> sound/pci/hda/tas2563_hda_i2c.c:325:37: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned int @@ got restricted __be32 [usertype] @@
sound/pci/hda/tas2563_hda_i2c.c:325:37: sparse: expected unsigned int
sound/pci/hda/tas2563_hda_i2c.c:325:37: sparse: got restricted __be32 [usertype]
vim +325 sound/pci/hda/tas2563_hda_i2c.c
306
307 /* Update the calibrate data, including speaker impedance, f0, etc, into algo.
308 * Calibrate data is done by manufacturer in the factory. These data are used
309 * by Algo for calucating the speaker temperature, speaker membrance excursion
310 * and f0 in real time during playback.
311 */
312 static int tas2563_tasdev_read_efi(struct tas2563_data *tas2563,
313 struct tas2563_dev *tasdev)
314 {
315 efi_status_t status;
316 unsigned int attr;
317 unsigned long max_size = TAS2563_CAL_DATA_SIZE;
318
319 for (int i = 0; i < TAS2563_CAL_N; ++i) {
320 status = efi.get_variable(efi_var_names[tasdev->dev_id][i],
321 &efi_guid, &attr, &max_size,
322 &tasdev->cal_data[i]);
323 if (status != EFI_SUCCESS)
324 return -EINVAL;
> 325 tasdev->cal_data[i] = cpu_to_be32(tasdev->cal_data[i]);
326 }
327
328 dev_info(tas2563->dev,
329 "Calibration data %d: power:%08x r0:%08x inv_r0:%08x r0_low:%08x tlim:%08x\n",
330 tasdev->dev_id, tasdev->cal_data[0], tasdev->cal_data[1],
331 tasdev->cal_data[2], tasdev->cal_data[3], tasdev->cal_data[4]);
332
333 return 0;
334 }
335
@@ -33,6 +33,11 @@
#define TAS2562_TDM_CFG9 TAS2562_REG(0, 0x0f)
#define TAS2562_TDM_CFG10 TAS2562_REG(0, 0x10)
#define TAS2562_TDM_DET TAS2562_REG(0, 0x11)
+#define TAS2562_BOOST_CFG1 TAS2562_REG(0, 0x33)
+#define TAS2562_BOOST_CFG2 TAS2562_REG(0, 0x34)
+#define TAS2562_BOOST_CFG3 TAS2562_REG(0, 0x35)
+#define TAS2562_BOOST_CFG4 TAS2562_REG(0, 0x40)
+#define TAS2562_ASI_CONFIG3 TAS2562_REG(0, 0x46)
#define TAS2562_REV_ID TAS2562_REG(0, 0x7d)
#define TAS2562_RX_OFF_MASK GENMASK(5, 1)
@@ -179,6 +179,20 @@ config SND_HDA_SCODEC_TAS2781_I2C
comment "Set to Y if you want auto-loading the side codec driver"
depends on SND_HDA=y && SND_HDA_SCODEC_TAS2781_I2C=m
+config SND_HDA_SCODEC_TAS2563_I2C
+ tristate "Build TAS2563 HD-audio side codec support for I2C Bus"
+ depends on I2C
+ depends on ACPI
+ depends on EFI
+ depends on SND_SOC
+ select SND_SOC_TAS25XX_DSP
+ help
+ Say Y or M here to include TAS2563 I2C HD-audio side codec support
+ in snd-hda-intel driver, such as ALC287.
+
+comment "Set to Y if you want auto-loading the side codec driver"
+ depends on SND_HDA=y && SND_HDA_SCODEC_TAS2562_I2C=m
+
config SND_HDA_CODEC_REALTEK
tristate "Build Realtek HD-audio codec support"
select SND_HDA_GENERIC
@@ -36,6 +36,7 @@ snd-hda-scodec-cs35l56-i2c-objs := cs35l56_hda_i2c.o
snd-hda-scodec-cs35l56-spi-objs := cs35l56_hda_spi.o
snd-hda-cs-dsp-ctls-objs := hda_cs_dsp_ctl.o
snd-hda-scodec-tas2781-i2c-objs := tas2781_hda_i2c.o
+snd-hda-scodec-tas2563-i2c-objs := tas2563_hda_i2c.o
# common driver
obj-$(CONFIG_SND_HDA) := snd-hda-codec.o
@@ -64,6 +65,7 @@ obj-$(CONFIG_SND_HDA_SCODEC_CS35L56_I2C) += snd-hda-scodec-cs35l56-i2c.o
obj-$(CONFIG_SND_HDA_SCODEC_CS35L56_SPI) += snd-hda-scodec-cs35l56-spi.o
obj-$(CONFIG_SND_HDA_CS_DSP_CONTROLS) += snd-hda-cs-dsp-ctls.o
obj-$(CONFIG_SND_HDA_SCODEC_TAS2781_I2C) += snd-hda-scodec-tas2781-i2c.o
+obj-$(CONFIG_SND_HDA_SCODEC_TAS2563_I2C) += snd-hda-scodec-tas2563-i2c.o
# this must be the last entry after codec drivers;
# otherwise the codec patches won't be hooked before the PCI probe
@@ -6770,7 +6770,7 @@ static int comp_match_cs35l41_dev_name(struct device *dev, void *data)
return !strcmp(d + n, tmp);
}
-static int comp_match_tas2781_dev_name(struct device *dev,
+static int comp_match_tas2xxx_dev_name(struct device *dev,
void *data)
{
struct scodec_dev_name *p = data;
@@ -6823,7 +6823,7 @@ static void cs35l41_generic_fixup(struct hda_codec *cdc, int action, const char
}
}
-static void tas2781_generic_fixup(struct hda_codec *cdc, int action,
+static void tas2xxx_generic_fixup(struct hda_codec *cdc, int action,
const char *bus, const char *hid)
{
struct device *dev = hda_codec_dev(cdc);
@@ -6841,7 +6841,7 @@ static void tas2781_generic_fixup(struct hda_codec *cdc, int action,
rec->index = 0;
spec->comps[0].codec = cdc;
component_match_add(dev, &spec->match,
- comp_match_tas2781_dev_name, rec);
+ comp_match_tas2xxx_dev_name, rec);
ret = component_master_add_with_match(dev, &comp_master_ops,
spec->match);
if (ret)
@@ -6888,7 +6888,13 @@ static void alc287_fixup_legion_16ithg6_speakers(struct hda_codec *cdc, const st
static void tas2781_fixup_i2c(struct hda_codec *cdc,
const struct hda_fixup *fix, int action)
{
- tas2781_generic_fixup(cdc, action, "i2c", "TIAS2781");
+ tas2xxx_generic_fixup(cdc, action, "i2c", "TIAS2781");
+}
+
+static void tas2563_fixup_i2c(struct hda_codec *cdc,
+ const struct hda_fixup *fix, int action)
+{
+ tas2xxx_generic_fixup(cdc, action, "i2c", "INT8866");
}
/* for alc295_fixup_hp_top_speakers */
@@ -7358,6 +7364,7 @@ enum {
ALC236_FIXUP_DELL_DUAL_CODECS,
ALC287_FIXUP_CS35L41_I2C_2_THINKPAD_ACPI,
ALC287_FIXUP_TAS2781_I2C,
+ ALC287_FIXUP_TAS2563_I2C,
ALC245_FIXUP_HP_MUTE_LED_COEFBIT,
ALC245_FIXUP_HP_X360_MUTE_LEDS,
ALC287_FIXUP_THINKPAD_I2S_SPK,
@@ -9447,6 +9454,12 @@ static const struct hda_fixup alc269_fixups[] = {
.chained = true,
.chain_id = ALC269_FIXUP_THINKPAD_ACPI,
},
+ [ALC287_FIXUP_TAS2563_I2C] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = tas2563_fixup_i2c,
+ .chained = true,
+ .chain_id = ALC285_FIXUP_THINKPAD_HEADSET_JACK,
+ },
[ALC245_FIXUP_HP_MUTE_LED_COEFBIT] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc245_fixup_hp_mute_led_coefbit,
@@ -10056,6 +10069,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x17aa, 0x3853, "Lenovo Yoga 7 15ITL5", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS),
SND_PCI_QUIRK(0x17aa, 0x3855, "Legion 7 16ITHG6", ALC287_FIXUP_LEGION_16ITHG6),
SND_PCI_QUIRK(0x17aa, 0x3869, "Lenovo Yoga7 14IAL7", ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN),
+ SND_PCI_QUIRK(0x17aa, 0x3870, "Lenovo Yoga 7 14ARB7", ALC287_FIXUP_TAS2563_I2C),
SND_PCI_QUIRK(0x17aa, 0x387d, "Yoga S780-16 pro Quad AAC", ALC287_FIXUP_TAS2781_I2C),
SND_PCI_QUIRK(0x17aa, 0x387e, "Yoga S780-16 pro Quad YC", ALC287_FIXUP_TAS2781_I2C),
SND_PCI_QUIRK(0x17aa, 0x3881, "YB9 dual power mode2 YC", ALC287_FIXUP_TAS2781_I2C),
new file mode 100644
@@ -0,0 +1,508 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+//
+// TAS2563 HDA I2C driver
+//
+// Copyright (C) 2023 Gergo Koteles <soyer@irl.hu>
+
+#include <linux/acpi.h>
+#include <linux/crc8.h>
+#include <linux/crc32.h>
+#include <linux/efi.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <sound/hda_codec.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+
+#include <sound/tas2562.h>
+#include <sound/tas25xx-dsp.h>
+
+#include "hda_local.h"
+#include "hda_auto_parser.h"
+#include "hda_component.h"
+#include "hda_jack.h"
+#include "hda_generic.h"
+
+#define TAS2563_GLOBAL_ADDR 0x48
+#define TAS2563_MAX_CHANNELS 2
+
+#define TAS2562_SW_RESET_RESET BIT(0)
+#define TAS2562_PWR_ACTIVE 0
+#define TAS2562_PWR_SUSPEND BIT(1)
+
+
+#define TAS2563_CAL_POWER TAS2562_REG(0x0d, 0x3c)
+#define TAS2563_CAL_R0 TAS2562_REG(0x0f, 0x34)
+#define TAS2563_CAL_INVR0 TAS2562_REG(0x0f, 0x40)
+#define TAS2563_CAL_R0_LOW TAS2562_REG(0x0f, 0x48)
+#define TAS2563_CAL_TLIM TAS2562_REG(0x10, 0x14)
+#define TAS2563_CAL_N 5
+#define TAS2563_CAL_DATA_SIZE 4
+
+static unsigned int cal_regs[TAS2563_CAL_N] = {
+ TAS2563_CAL_POWER, TAS2563_CAL_R0, TAS2563_CAL_INVR0,
+ TAS2563_CAL_R0_LOW, TAS2563_CAL_TLIM,
+};
+
+static efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, 0x09,
+ 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92);
+
+static efi_char16_t *efi_var_names[TAS2563_MAX_CHANNELS][TAS2563_CAL_N] = {
+ { L"Power_1", L"R0_1", L"InvR0_1", L"R0_Low_1", L"TLim_1" },
+ { L"Power_2", L"R0_2", L"InvR0_2", L"R0_Low_2", L"TLim_2" },
+};
+
+struct tas2563_dev {
+ unsigned char dev_id;
+ unsigned int i2c_addr;
+ struct i2c_client *client;
+ struct regmap *regmap;
+ uint32_t cal_data[TAS2563_CAL_N];
+};
+
+struct tas2563_data {
+ struct device *dev;
+ struct i2c_client *client;
+ struct tas2563_dev tasdevs[TAS2563_MAX_CHANNELS];
+ unsigned char ndev;
+ char firmware_name[32];
+ struct tas25xx_fw_data *fw_data;
+};
+
+static const struct regmap_range_cfg tas2563_ranges[] = {
+ {
+ .range_min = 0,
+ .range_max = 255 * 128,
+ .selector_reg = TAS2562_PAGE_CTRL,
+ .selector_mask = 0xff,
+ .selector_shift = 0,
+ .window_start = 0,
+ .window_len = 128,
+ },
+};
+
+static const struct regmap_config tas2563_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = 255 * 128,
+ .cache_type = REGCACHE_NONE,
+ .ranges = tas2563_ranges,
+ .num_ranges = ARRAY_SIZE(tas2563_ranges),
+};
+
+#define TAS2563_REG_INIT_N 12
+static const struct reg_default tas2563_reg_init[TAS2563_MAX_CHANNELS]
+ [TAS2563_REG_INIT_N] = {
+ {
+ { TAS2562_TDM_CFG2, 0x5a },
+ { TAS2562_TDM_CFG4, 0xf3 },
+ { TAS2562_TDM_CFG5, 0x42 },
+ { TAS2562_TDM_CFG6, 0x40 },
+ { TAS2562_BOOST_CFG1, 0xd4 },
+ { TAS2562_BOOST_CFG3, 0xa4 },
+ { TAS2562_REG(0x00, 0x36), 0x0b },
+ { TAS2562_REG(0x00, 0x38), 0x21 },
+ { TAS2562_REG(0x00, 0x3c), 0x58 },
+ { TAS2562_BOOST_CFG4, 0xb6 },
+ { TAS2562_ASI_CONFIG3, 0x04},
+ { TAS2562_REG(0x00, 0x47), 0xb1 },
+ },
+ {
+ { TAS2562_TDM_CFG2, 0x6a },
+ { TAS2562_TDM_CFG4, 0x93 },
+ { TAS2562_TDM_CFG5, 0x46 },
+ { TAS2562_TDM_CFG6, 0x44 },
+ { TAS2562_BOOST_CFG1, 0xd4 },
+ { TAS2562_BOOST_CFG3, 0xa4 },
+ { TAS2562_REG(0x00, 0x36), 0x0c },
+ { TAS2562_REG(0x00, 0x38), 0x21 },
+ { TAS2562_REG(0x00, 0x3c), 0x58 },
+ { TAS2562_BOOST_CFG4, 0xb6 },
+ { TAS2562_ASI_CONFIG3, 0x05},
+ { TAS2562_REG(0x00, 0x47), 0xb0 },
+ },
+};
+
+static void tas2563_set_power(struct tas2563_data *tas2563, char power)
+{
+ int ret;
+
+ if (!tas2563->fw_data)
+ return;
+
+ for (int i = 0; i < tas2563->ndev; ++i) {
+ struct regmap *regmap = tas2563->tasdevs[i].regmap;
+
+ ret = regmap_write(regmap, TAS2562_PWR_CTRL, power);
+ if (ret)
+ dev_err(tas2563->dev, "Error setting power\n");
+ }
+}
+
+static void tas2563_tasdev_setup(struct tas2563_data *tas2563,
+ struct tas2563_dev *tasdev)
+{
+ int ret;
+ struct regmap *regmap = tasdev->regmap;
+
+ if (!tas2563->fw_data)
+ return;
+
+ ret = regmap_write(regmap, TAS2562_SW_RESET, TAS2562_SW_RESET_RESET);
+ if (ret)
+ dev_err(tas2563->dev, "Error resetting device\n");
+
+ ret = tas25xx_write_program(tas2563->dev, regmap, tas2563->fw_data, 0);
+ if (ret)
+ dev_err(tas2563->dev, "Error writing program\n");
+
+ ret = tas25xx_write_config(tas2563->dev, regmap, tas2563->fw_data, 0);
+ if (ret)
+ dev_err(tas2563->dev, "Error writing config\n");
+
+ for (int i = 0; i < TAS2563_REG_INIT_N; ++i) {
+ struct reg_default reg = tas2563_reg_init[tasdev->dev_id][i];
+
+ ret = regmap_write(regmap, reg.reg, reg.def);
+ if (ret)
+ dev_err(tas2563->dev, "Error writing init regs\n");
+ }
+
+ ret = regmap_write(regmap, TAS25XX_DSP_MODE, 1);
+ if (ret)
+ dev_err(tas2563->dev, "Error enabling DSP\n");
+
+ for (int i = 0; i < TAS2563_CAL_N; ++i) {
+ ret = regmap_bulk_write(regmap, cal_regs[i],
+ &tasdev->cal_data[i], TAS2563_CAL_DATA_SIZE);
+ if (ret)
+ dev_err(tas2563->dev, "Error writing calib regs\n");
+ }
+
+ ret = regmap_write(regmap, TAS2562_PWR_CTRL, 0);
+ if (ret)
+ dev_err(tas2563->dev, "Error setting power on\n");
+}
+
+static void tas2563_fw_loaded(const struct firmware *fw, void *context)
+{
+ struct tas2563_data *tas2563 = context;
+
+ if (!fw)
+ return;
+
+ tas2563->fw_data = tas25xx_parse_fw(tas2563->dev, fw);
+ if (!tas2563->fw_data) {
+ dev_err(tas2563->dev, "Failed to parse firmware\n");
+ return;
+ }
+
+ for (int i = 0; i < tas2563->ndev; ++i)
+ tas2563_tasdev_setup(tas2563, &tas2563->tasdevs[i]);
+}
+
+static void tas2563_hda_playback_hook(struct device *dev, int action)
+{
+ struct tas2563_data *tas2563 = dev_get_drvdata(dev);
+
+ dev_dbg(tas2563->dev, "%s: action = %d\n", __func__, action);
+ switch (action) {
+ case HDA_GEN_PCM_ACT_OPEN:
+ pm_runtime_get_sync(dev);
+ tas2563_set_power(tas2563, TAS2562_PWR_ACTIVE);
+ break;
+ case HDA_GEN_PCM_ACT_CLOSE:
+ tas2563_set_power(tas2563, TAS2562_PWR_SUSPEND);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+ break;
+ default:
+ dev_dbg(tas2563->dev, "Playback action not supported: %d\n",
+ action);
+ break;
+ }
+}
+
+static int tas2563_hda_bind(struct device *dev, struct device *master,
+ void *master_data)
+{
+ struct tas2563_data *tas2563 = dev_get_drvdata(dev);
+ struct hda_component *comps = master_data;
+ struct hda_codec *codec;
+ int ret;
+
+ if (!comps)
+ return -EINVAL;
+
+ if (comps->dev)
+ return -EBUSY;
+ comps->dev = dev;
+ codec = comps->codec;
+
+ pm_runtime_get_sync(dev);
+
+ strscpy(comps->name, dev_name(dev), sizeof(comps->name));
+ scnprintf(tas2563->firmware_name, 32, "TAS2563-%08X.bin",
+ codec->core.subsystem_id);
+
+ ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT,
+ tas2563->firmware_name, tas2563->dev,
+ GFP_KERNEL, tas2563,
+ tas2563_fw_loaded);
+ if (ret)
+ dev_err(tas2563->dev, "request_firmware_nowait err: %d\n",
+ ret);
+
+ comps->playback_hook = tas2563_hda_playback_hook;
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ return ret;
+}
+
+static void tas2563_hda_unbind(struct device *dev,
+ struct device *master, void *master_data)
+{
+ struct hda_component *comps = master_data;
+
+ if (comps->dev != dev)
+ return;
+
+ comps->dev = NULL;
+ comps->playback_hook = NULL;
+}
+
+static const struct component_ops tas2563_hda_comp_ops = {
+ .bind = tas2563_hda_bind,
+ .unbind = tas2563_hda_unbind,
+};
+
+static int tas2563_tasdev_init_regmap(struct tas2563_data *tas2563,
+ struct tas2563_dev *tasdev)
+{
+ tasdev->regmap = devm_regmap_init_i2c(tasdev->client,
+ &tas2563_regmap_config);
+ if (IS_ERR(tasdev->regmap))
+ return PTR_ERR(tasdev->regmap);
+ return 0;
+}
+
+static int tas2563_tasdev_init_client(struct tas2563_data *tas2563,
+ struct tas2563_dev *tasdev)
+{
+ tasdev->client = tas2563->client->addr == tasdev->i2c_addr
+ ? tas2563->client : devm_i2c_new_dummy_device(tas2563->dev,
+ tas2563->client->adapter, tasdev->i2c_addr);
+ if (IS_ERR(tasdev->client))
+ return PTR_ERR(tasdev->client);
+ return 0;
+}
+
+/* Update the calibrate data, including speaker impedance, f0, etc, into algo.
+ * Calibrate data is done by manufacturer in the factory. These data are used
+ * by Algo for calucating the speaker temperature, speaker membrance excursion
+ * and f0 in real time during playback.
+ */
+static int tas2563_tasdev_read_efi(struct tas2563_data *tas2563,
+ struct tas2563_dev *tasdev)
+{
+ efi_status_t status;
+ unsigned int attr;
+ unsigned long max_size = TAS2563_CAL_DATA_SIZE;
+
+ for (int i = 0; i < TAS2563_CAL_N; ++i) {
+ status = efi.get_variable(efi_var_names[tasdev->dev_id][i],
+ &efi_guid, &attr, &max_size,
+ &tasdev->cal_data[i]);
+ if (status != EFI_SUCCESS)
+ return -EINVAL;
+ tasdev->cal_data[i] = cpu_to_be32(tasdev->cal_data[i]);
+ }
+
+ dev_info(tas2563->dev,
+ "Calibration data %d: power:%08x r0:%08x inv_r0:%08x r0_low:%08x tlim:%08x\n",
+ tasdev->dev_id, tasdev->cal_data[0], tasdev->cal_data[1],
+ tasdev->cal_data[2], tasdev->cal_data[3], tasdev->cal_data[4]);
+
+ return 0;
+}
+
+static int tas2563_get_i2c_res(struct acpi_resource *ares, void *data)
+{
+ struct tas2563_data *tas2563 = data;
+ struct acpi_resource_i2c_serialbus *sb;
+ struct tas2563_dev *tasdev;
+
+ if (i2c_acpi_get_i2c_resource(ares, &sb)) {
+ if (tas2563->ndev < 2 &&
+ sb->slave_address != TAS2563_GLOBAL_ADDR) {
+ tasdev = &tas2563->tasdevs[tas2563->ndev];
+ tasdev->dev_id = tas2563->ndev;
+ tasdev->i2c_addr =
+ (unsigned int)sb->slave_address;
+ tas2563->ndev++;
+ }
+ }
+ return 1;
+}
+
+static int tas2563_read_acpi(struct tas2563_data *tas2563)
+{
+ struct acpi_device *adev;
+ LIST_HEAD(resources);
+ int ret;
+
+ adev = ACPI_COMPANION(tas2563->dev);
+ if (!adev) {
+ dev_err(tas2563->dev, "Error could not get ACPI device\n");
+ return -ENODEV;
+ }
+
+ ret = acpi_dev_get_resources(adev, &resources, tas2563_get_i2c_res,
+ tas2563);
+ if (ret < 0) {
+ dev_err(tas2563->dev, "Read acpi error, ret: %d\n", ret);
+ return ret;
+ }
+
+ acpi_dev_free_resource_list(&resources);
+
+ return 0;
+}
+
+static int tas2563_hda_i2c_probe(struct i2c_client *client)
+{
+ struct tas2563_data *tas2563;
+ int ret;
+
+ tas2563 = devm_kzalloc(&client->dev, sizeof(struct tas2563_data),
+ GFP_KERNEL);
+ if (!tas2563)
+ return -ENOMEM;
+ tas2563->dev = &client->dev;
+ tas2563->client = client;
+
+ dev_set_drvdata(tas2563->dev, tas2563);
+
+ ret = tas2563_read_acpi(tas2563);
+ if (ret)
+ return dev_err_probe(tas2563->dev, ret,
+ "Platform not supported\n");
+
+ for (int i = 0; i < tas2563->ndev; ++i) {
+ struct tas2563_dev *tasdev = &tas2563->tasdevs[i];
+
+ ret = tas2563_tasdev_read_efi(tas2563, tasdev);
+ if (ret)
+ return dev_err_probe(tas2563->dev, ret,
+ "Calibration data cannot be read from EFI\n");
+
+ ret = tas2563_tasdev_init_client(tas2563, tasdev);
+ if (ret)
+ return dev_err_probe(tas2563->dev, ret,
+ "Failed to init i2c client\n");
+
+ ret = tas2563_tasdev_init_regmap(tas2563, tasdev);
+ if (ret)
+ return dev_err_probe(tas2563->dev, ret,
+ "Failed to allocate register map\n");
+ }
+
+ ret = component_add(tas2563->dev, &tas2563_hda_comp_ops);
+ if (ret) {
+ return dev_err_probe(tas2563->dev, ret,
+ "Register component failed\n");
+ }
+
+ pm_runtime_set_autosuspend_delay(tas2563->dev, 3000);
+ pm_runtime_use_autosuspend(tas2563->dev);
+ pm_runtime_mark_last_busy(tas2563->dev);
+ pm_runtime_set_active(tas2563->dev);
+ pm_runtime_get_noresume(tas2563->dev);
+ pm_runtime_enable(tas2563->dev);
+
+ pm_runtime_put_autosuspend(tas2563->dev);
+
+ return 0;
+}
+
+static void tas2563_hda_i2c_remove(struct i2c_client *client)
+{
+ struct tas2563_data *tas2563 = dev_get_drvdata(&client->dev);
+
+ pm_runtime_get_sync(tas2563->dev);
+ pm_runtime_disable(tas2563->dev);
+
+ component_del(tas2563->dev, &tas2563_hda_comp_ops);
+
+ pm_runtime_put_noidle(tas2563->dev);
+}
+
+static int tas2563_system_suspend(struct device *dev)
+{
+ struct tas2563_data *tas2563 = dev_get_drvdata(dev);
+ int ret;
+
+ dev_dbg(tas2563->dev, "System Suspend\n");
+
+ ret = pm_runtime_force_suspend(dev);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int tas2563_system_resume(struct device *dev)
+{
+ int ret;
+ struct tas2563_data *tas2563 = dev_get_drvdata(dev);
+
+ dev_dbg(tas2563->dev, "System Resume\n");
+
+ ret = pm_runtime_force_resume(dev);
+ if (ret)
+ return ret;
+
+ for (int i = 0; i < tas2563->ndev; ++i)
+ tas2563_tasdev_setup(tas2563, &tas2563->tasdevs[i]);
+
+ return 0;
+}
+
+static const struct dev_pm_ops tas2563_hda_pm_ops = {
+ SYSTEM_SLEEP_PM_OPS(tas2563_system_suspend, tas2563_system_resume)
+};
+
+static const struct i2c_device_id tas2563_hda_i2c_id[] = {
+ { "tas2563-hda", 0 },
+ {}
+};
+
+static const struct acpi_device_id tas2563_acpi_hda_match[] = {
+ {"INT8866", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, tas2563_acpi_hda_match);
+
+static struct i2c_driver tas2563_hda_i2c_driver = {
+ .driver = {
+ .name = "tas2563-hda",
+ .acpi_match_table = tas2563_acpi_hda_match,
+ .pm = &tas2563_hda_pm_ops,
+ },
+ .id_table = tas2563_hda_i2c_id,
+ .probe = tas2563_hda_i2c_probe,
+ .remove = tas2563_hda_i2c_remove,
+};
+module_i2c_driver(tas2563_hda_i2c_driver);
+
+MODULE_DESCRIPTION("TAS2563 HDA Driver");
+MODULE_AUTHOR("Gergo Koteles <soyer@irl.hu>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(SND_SOC_TAS25XX_DSP);