[v2,02/14] arm64: dts: imx8mm-kontron: Add DL (Display-Line) overlay with LVDS support
Commit Message
From: Frieder Schrempf <frieder.schrempf@kontron.de>
The Kontron Electronics DL i.MX8MM consists of the BL i.MX8MM board
and a 7" LVDS panel. Provide an overlay that enables the panel.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
Changes for v2:
* Rework DSI mux GPIO logic to be compatible with overlay
---
arch/arm64/boot/dts/freescale/Makefile | 4 +
.../boot/dts/freescale/imx8mm-kontron-dl.dtso | 200 ++++++++++++++++++
2 files changed, 204 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
Comments
On Thu, Nov 30, 2023 at 05:16:02PM +0100, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf@kontron.de>
>
> The Kontron Electronics DL i.MX8MM consists of the BL i.MX8MM board
> and a 7" LVDS panel. Provide an overlay that enables the panel.
>
> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
> ---
> Changes for v2:
> * Rework DSI mux GPIO logic to be compatible with overlay
> ---
> arch/arm64/boot/dts/freescale/Makefile | 4 +
> .../boot/dts/freescale/imx8mm-kontron-dl.dtso | 200 ++++++++++++++++++
> 2 files changed, 204 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 300049037eb0b..e08024797721a 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -166,6 +166,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
>
> +imx8mm-kontron-dl-dtbs := imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo
> +
> +dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-dl.dtb
> +
> imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
> imx8mm-venice-gw72xx-0x-rpidsi-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
> imx8mm-venice-gw72xx-0x-rs232-rts-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs232-rts.dtbo
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
> new file mode 100644
> index 0000000000000..c6369072577e0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
> @@ -0,0 +1,200 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2023 Kontron Electronics GmbH
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include "imx8mm-pinfunc.h"
> +
> +&{/} {
> + compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm";
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm1 0 50000 0>;
> + brightness-levels = <0 100>;
> + num-interpolated-steps = <100>;
> + default-brightness-level = <100>;
> + };
> +
> + panel {
> + compatible = "panel-lvds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_panel>;
> + backlight = <&backlight>;
> + data-mapping = "vesa-24";
> + enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
> + height-mm = <86>;
> + width-mm = <154>;
> +
> + panel-timing {
> + clock-frequency = <51200000>;
> + hactive = <1024>;
> + vactive = <600>;
> + hsync-len = <1>;
> + hfront-porch = <160>;
> + hback-porch = <160>;
> + vsync-len = <1>;
> + vfront-porch = <12>;
> + vback-porch = <23>;
> + };
> +
> + port {
> + panel_out_bridge: endpoint {
> + remote-endpoint = <&bridge_out_panel>;
> + };
> + };
> + };
> +};
> +
> +&dsi_mux_sel_hdmi {
> + status = "disabled";
> +};
> +
> +&dsi_mux_sel_lvds {
> + status = "okay";
> +};
> +
> +&dsi_out_bridge {
> + remote-endpoint = <&bridge_in_dsi_lvds>;
> +};
> +
> +&gpio3 {
> + panel_rst {
> + gpio-hog;
> + gpios = <20 GPIO_ACTIVE_HIGH>;
> + output-high;
> + line-name = "panel-reset";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_panel_rst>;
> + };
> +
> + panel_stby {
> + gpio-hog;
> + gpios = <21 GPIO_ACTIVE_HIGH>;
> + output-high;
> + line-name = "panel-standby";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_panel_stby>;
> + };
> +
> + panel_hinv {
> + gpio-hog;
> + gpios = <24 GPIO_ACTIVE_HIGH>;
> + output-high;
> + line-name = "panel-horizontal-invert";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_panel_hinv>;
> + };
> +
> + panel_vinv {
> + gpio-hog;
> + gpios = <25 GPIO_ACTIVE_HIGH>;
> + output-low;
> + line-name = "panel-vertical-invert";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_panel_vinv>;
> + };
> +};
> +
> +&hdmi {
> + status = "disabled";
> +};
> +
> +&i2c2 {
> + clock-frequency = <400000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gt911@5d {
> + compatible = "goodix,gt928";
> + reg = <0x5d>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_touch>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <22 8>;
> + reset-gpios = <&gpio3 23 0>;
> + irq-gpios = <&gpio3 22 0>;
> + };
> +};
> +
> +&lvds {
> + status = "okay";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@2 {
> + reg = <2>;
Have a newline between properties and child node.
> + bridge_out_panel: endpoint {
> + remote-endpoint = <&panel_out_bridge>;
> + };
> + };
> + };
> +};
> +
> +&pwm1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm1>;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_panel_rst: panelrstgrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19
> + >;
> + };
> +
> + pinctrl_panel_stby: panelstbygrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19
> + >;
> + };
> +
> + pinctrl_panel_hinv: panelhinvgrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x19
> + >;
> + };
> +
> + pinctrl_panel_vinv: panelvinvgrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
Could you sort the pinctrl nodes alphabetically?
Shawn
> + fsl,pins = <
> + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000083
> + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000083
> + >;
> + };
> +
> + pinctrl_pwm1: pwm1grp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x6
> + >;
> + };
> +
> + pinctrl_panel: panelgrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x19
> + >;
> + };
> +
> + pinctrl_touch: touchgrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19
> + MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19
> + >;
> + };
> +};
> --
> 2.43.0
>
On 06.12.23 03:43, Shawn Guo wrote:
> On Thu, Nov 30, 2023 at 05:16:02PM +0100, Frieder Schrempf wrote:
>> From: Frieder Schrempf <frieder.schrempf@kontron.de>
>>
>> The Kontron Electronics DL i.MX8MM consists of the BL i.MX8MM board
>> and a 7" LVDS panel. Provide an overlay that enables the panel.
>>
>> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
>> ---
>> Changes for v2:
>> * Rework DSI mux GPIO logic to be compatible with overlay
>> ---
>> arch/arm64/boot/dts/freescale/Makefile | 4 +
>> .../boot/dts/freescale/imx8mm-kontron-dl.dtso | 200 ++++++++++++++++++
>> 2 files changed, 204 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
>>
>> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
>> index 300049037eb0b..e08024797721a 100644
>> --- a/arch/arm64/boot/dts/freescale/Makefile
>> +++ b/arch/arm64/boot/dts/freescale/Makefile
>> @@ -166,6 +166,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
>> dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
>> dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
>>
>> +imx8mm-kontron-dl-dtbs := imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo
>> +
>> +dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-dl.dtb
>> +
>> imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
>> imx8mm-venice-gw72xx-0x-rpidsi-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
>> imx8mm-venice-gw72xx-0x-rs232-rts-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs232-rts.dtbo
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
>> new file mode 100644
>> index 0000000000000..c6369072577e0
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
>> @@ -0,0 +1,200 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2023 Kontron Electronics GmbH
>> + */
>> +
>> +/dts-v1/;
>> +/plugin/;
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include "imx8mm-pinfunc.h"
>> +
>> +&{/} {
>> + compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm";
>> +
>> + backlight: backlight {
>> + compatible = "pwm-backlight";
>> + pwms = <&pwm1 0 50000 0>;
>> + brightness-levels = <0 100>;
>> + num-interpolated-steps = <100>;
>> + default-brightness-level = <100>;
>> + };
>> +
>> + panel {
>> + compatible = "panel-lvds";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_panel>;
>> + backlight = <&backlight>;
>> + data-mapping = "vesa-24";
>> + enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
>> + height-mm = <86>;
>> + width-mm = <154>;
>> +
>> + panel-timing {
>> + clock-frequency = <51200000>;
>> + hactive = <1024>;
>> + vactive = <600>;
>> + hsync-len = <1>;
>> + hfront-porch = <160>;
>> + hback-porch = <160>;
>> + vsync-len = <1>;
>> + vfront-porch = <12>;
>> + vback-porch = <23>;
>> + };
>> +
>> + port {
>> + panel_out_bridge: endpoint {
>> + remote-endpoint = <&bridge_out_panel>;
>> + };
>> + };
>> + };
>> +};
>> +
>> +&dsi_mux_sel_hdmi {
>> + status = "disabled";
>> +};
>> +
>> +&dsi_mux_sel_lvds {
>> + status = "okay";
>> +};
>> +
>> +&dsi_out_bridge {
>> + remote-endpoint = <&bridge_in_dsi_lvds>;
>> +};
>> +
>> +&gpio3 {
>> + panel_rst {
>> + gpio-hog;
>> + gpios = <20 GPIO_ACTIVE_HIGH>;
>> + output-high;
>> + line-name = "panel-reset";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_panel_rst>;
>> + };
>> +
>> + panel_stby {
>> + gpio-hog;
>> + gpios = <21 GPIO_ACTIVE_HIGH>;
>> + output-high;
>> + line-name = "panel-standby";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_panel_stby>;
>> + };
>> +
>> + panel_hinv {
>> + gpio-hog;
>> + gpios = <24 GPIO_ACTIVE_HIGH>;
>> + output-high;
>> + line-name = "panel-horizontal-invert";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_panel_hinv>;
>> + };
>> +
>> + panel_vinv {
>> + gpio-hog;
>> + gpios = <25 GPIO_ACTIVE_HIGH>;
>> + output-low;
>> + line-name = "panel-vertical-invert";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_panel_vinv>;
>> + };
>> +};
>> +
>> +&hdmi {
>> + status = "disabled";
>> +};
>> +
>> +&i2c2 {
>> + clock-frequency = <400000>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_i2c2>;
>> + status = "okay";
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + gt911@5d {
>> + compatible = "goodix,gt928";
>> + reg = <0x5d>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_touch>;
>> + interrupt-parent = <&gpio3>;
>> + interrupts = <22 8>;
>> + reset-gpios = <&gpio3 23 0>;
>> + irq-gpios = <&gpio3 22 0>;
>> + };
>> +};
>> +
>> +&lvds {
>> + status = "okay";
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port@2 {
>> + reg = <2>;
>
> Have a newline between properties and child node.
Sure, fixed in v3
>
>> + bridge_out_panel: endpoint {
>> + remote-endpoint = <&panel_out_bridge>;
>> + };
>> + };
>> + };
>> +};
>> +
>> +&pwm1 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_pwm1>;
>> + status = "okay";
>> +};
>> +
>> +&iomuxc {
>> + pinctrl_panel_rst: panelrstgrp {
>> + fsl,pins = <
>> + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19
>> + >;
>> + };
>> +
>> + pinctrl_panel_stby: panelstbygrp {
>> + fsl,pins = <
>> + MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19
>> + >;
>> + };
>> +
>> + pinctrl_panel_hinv: panelhinvgrp {
>> + fsl,pins = <
>> + MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x19
>> + >;
>> + };
>> +
>> + pinctrl_panel_vinv: panelvinvgrp {
>> + fsl,pins = <
>> + MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19
>> + >;
>> + };
>> +
>> + pinctrl_i2c2: i2c2grp {
>
> Could you sort the pinctrl nodes alphabetically?
Sure, done in v3
Thanks
Frieder
>> + fsl,pins = <
>> + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000083
>> + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000083
>> + >;
>> + };
>> +
>> + pinctrl_pwm1: pwm1grp {
>> + fsl,pins = <
>> + MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x6
>> + >;
>> + };
>> +
>> + pinctrl_panel: panelgrp {
>> + fsl,pins = <
>> + MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x19
>> + >;
>> + };
>> +
>> + pinctrl_touch: touchgrp {
>> + fsl,pins = <
>> + MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19
>> + MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19
>> + >;
>> + };
>> +};
>> --
>> 2.43.0
>>
@@ -166,6 +166,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
+imx8mm-kontron-dl-dtbs := imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-dl.dtb
+
imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
imx8mm-venice-gw72xx-0x-rpidsi-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
imx8mm-venice-gw72xx-0x-rs232-rts-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs232-rts.dtbo
new file mode 100644
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mm-pinfunc.h"
+
+&{/} {
+ compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 50000 0>;
+ brightness-levels = <0 100>;
+ num-interpolated-steps = <100>;
+ default-brightness-level = <100>;
+ };
+
+ panel {
+ compatible = "panel-lvds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel>;
+ backlight = <&backlight>;
+ data-mapping = "vesa-24";
+ enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ height-mm = <86>;
+ width-mm = <154>;
+
+ panel-timing {
+ clock-frequency = <51200000>;
+ hactive = <1024>;
+ vactive = <600>;
+ hsync-len = <1>;
+ hfront-porch = <160>;
+ hback-porch = <160>;
+ vsync-len = <1>;
+ vfront-porch = <12>;
+ vback-porch = <23>;
+ };
+
+ port {
+ panel_out_bridge: endpoint {
+ remote-endpoint = <&bridge_out_panel>;
+ };
+ };
+ };
+};
+
+&dsi_mux_sel_hdmi {
+ status = "disabled";
+};
+
+&dsi_mux_sel_lvds {
+ status = "okay";
+};
+
+&dsi_out_bridge {
+ remote-endpoint = <&bridge_in_dsi_lvds>;
+};
+
+&gpio3 {
+ panel_rst {
+ gpio-hog;
+ gpios = <20 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "panel-reset";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel_rst>;
+ };
+
+ panel_stby {
+ gpio-hog;
+ gpios = <21 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "panel-standby";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel_stby>;
+ };
+
+ panel_hinv {
+ gpio-hog;
+ gpios = <24 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "panel-horizontal-invert";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel_hinv>;
+ };
+
+ panel_vinv {
+ gpio-hog;
+ gpios = <25 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "panel-vertical-invert";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel_vinv>;
+ };
+};
+
+&hdmi {
+ status = "disabled";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gt911@5d {
+ compatible = "goodix,gt928";
+ reg = <0x5d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touch>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <22 8>;
+ reset-gpios = <&gpio3 23 0>;
+ irq-gpios = <&gpio3 22 0>;
+ };
+};
+
+&lvds {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ reg = <2>;
+ bridge_out_panel: endpoint {
+ remote-endpoint = <&panel_out_bridge>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_panel_rst: panelrstgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19
+ >;
+ };
+
+ pinctrl_panel_stby: panelstbygrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19
+ >;
+ };
+
+ pinctrl_panel_hinv: panelhinvgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x19
+ >;
+ };
+
+ pinctrl_panel_vinv: panelvinvgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000083
+ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000083
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x6
+ >;
+ };
+
+ pinctrl_panel: panelgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x19
+ >;
+ };
+
+ pinctrl_touch: touchgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19
+ MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19
+ >;
+ };
+};