diff mbox series

[v5,7/9] tty: serial: amba-pl011: fix miscellaneous checkpatch warnings

Message ID 20231130-mbly-uart-v5-7-6566703a04b5@bootlin.com
State New
Headers
Series Cleanup AMBA PL011 driver |

Commit Message

Théo Lebrun Nov. 30, 2023, 2:07 p.m. UTC 
  Fix the following messages from checkpatch:

    $ ./scripts/checkpatch.pl --strict --file \
        drivers/tty/serial/amba-pl011.c

    ERROR: do not initialise statics to false
    WARNING: Possible unnecessary 'out of memory' message
    WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
    WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then
             dev_info(dev, ... then pr_info(...  to
    CHECK: Prefer using the BIT macro

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 drivers/tty/serial/amba-pl011.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

Comments

Linus Walleij Dec. 4, 2023, 10:02 a.m. UTC | #1 
On Thu, Nov 30, 2023 at 3:07 PM Théo Lebrun <theo.lebrun@bootlin.com> wrote:

> Fix the following messages from checkpatch:
>
>     $ ./scripts/checkpatch.pl --strict --file \
>         drivers/tty/serial/amba-pl011.c
>
>     ERROR: do not initialise statics to false
>     WARNING: Possible unnecessary 'out of memory' message
>     WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
>     WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then
>              dev_info(dev, ... then pr_info(...  to
>     CHECK: Prefer using the BIT macro
>
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 3c657bac2359..d141af8f8a5f 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -51,7 +51,7 @@ 
 #define AMBA_ISR_PASS_LIMIT	256
 
 #define UART_DR_ERROR		(UART011_DR_OE | UART011_DR_BE | UART011_DR_PE | UART011_DR_FE)
-#define UART_DUMMY_DR_RX	(1 << 16)
+#define UART_DUMMY_DR_RX	BIT(16)
 
 enum {
 	REG_DR,
@@ -1109,7 +1109,6 @@  static void pl011_dma_startup(struct uart_amba_port *uap)
 
 	uap->dmatx.buf = kmalloc(PL011_DMA_BUFFER_SIZE, GFP_KERNEL | __GFP_DMA);
 	if (!uap->dmatx.buf) {
-		dev_err(uap->port.dev, "no memory for DMA TX buffer\n");
 		uap->port.fifosize = uap->fifosize;
 		return;
 	}
@@ -2528,7 +2527,7 @@  static void qdf2400_e44_putc(struct uart_port *port, unsigned char c)
 		cpu_relax();
 }
 
-static void qdf2400_e44_early_write(struct console *con, const char *s, unsigned n)
+static void qdf2400_e44_early_write(struct console *con, const char *s, unsigned int n)
 {
 	struct earlycon_device *dev = con->data;
 
@@ -2547,7 +2546,7 @@  static void pl011_putc(struct uart_port *port, unsigned char c)
 		cpu_relax();
 }
 
-static void pl011_early_write(struct console *con, const char *s, unsigned n)
+static void pl011_early_write(struct console *con, const char *s, unsigned int n)
 {
 	struct earlycon_device *dev = con->data;
 
@@ -2653,8 +2652,8 @@  static struct uart_driver amba_reg = {
 static int pl011_probe_dt_alias(int index, struct device *dev)
 {
 	struct device_node *np;
-	static bool seen_dev_with_alias = false;
-	static bool seen_dev_without_alias = false;
+	static bool seen_dev_with_alias;
+	static bool seen_dev_without_alias;
 	int ret = index;
 
 	if (!IS_ENABLED(CONFIG_OF))
@@ -2996,7 +2995,7 @@  static struct amba_driver pl011_driver = {
 
 static int __init pl011_init(void)
 {
-	printk(KERN_INFO "Serial: AMBA PL011 UART driver\n");
+	pr_info("Serial: AMBA PL011 UART driver\n");
 
 	if (platform_driver_register(&arm_sbsa_uart_platform_driver))
 		pr_warn("could not register SBSA UART platform driver\n");