loongarch: add dependency between vmlinuz.efi and vmlinux.efi

Message ID 20231119053448.2367725-1-masahiroy@kernel.org
State New
Headers
Series loongarch: add dependency between vmlinuz.efi and vmlinux.efi |

Commit Message

Masahiro Yamada Nov. 19, 2023, 5:34 a.m. UTC
  A common issue in Makefile is a race in parallel building.

You need to be careful to prevent multiple threads from writing to the
same file simultaneously.

Commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not
generate invalid images") addressed such a bad scenario.

A similar symptom occurs with the following command:

  $ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
    [ snip ]
    SORTTAB vmlinux
    OBJCOPY arch/loongarch/boot/vmlinux.efi
    OBJCOPY arch/loongarch/boot/vmlinux.efi
    PAD     arch/loongarch/boot/vmlinux.bin
    GZIP    arch/loongarch/boot/vmlinuz
    OBJCOPY arch/loongarch/boot/vmlinuz.o
    LD      arch/loongarch/boot/vmlinuz.efi.elf
    OBJCOPY arch/loongarch/boot/vmlinuz.efi

The log "OBJCOPY arch/loongarch/boot/vmlinux.efi" is displayed twice.

It indicates that two threads simultaneously enter arch/loongarch/boot/
and write to arch/loongarch/boot/vmlinux.efi.

It occasionally leads to a build failure:

  $ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
    [ snip ]
    SORTTAB vmlinux
    OBJCOPY arch/loongarch/boot/vmlinux.efi
    PAD     arch/loongarch/boot/vmlinux.bin
  truncate: Invalid number: ‘arch/loongarch/boot/vmlinux.bin’
  make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13:
  arch/loongarch/boot/vmlinux.bin] Error 1
  make[2]: *** Deleting file 'arch/loongarch/boot/vmlinux.bin'
  make[1]: *** [arch/loongarch/Makefile:146: vmlinuz.efi] Error 2
  make[1]: *** Waiting for unfinished jobs....
  make: *** [Makefile:234: __sub-make] Error 2

vmlinuz.efi depends on vmlinux.efi, but such a dependency is not
specified in arch/loongarch/Makefile.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---

 arch/loongarch/Makefile | 1 +
 1 file changed, 1 insertion(+)
  

Comments

Huacai Chen Nov. 19, 2023, 11:59 a.m. UTC | #1
Hi, Masahiro,

On Sun, Nov 19, 2023 at 1:35 PM Masahiro Yamada <masahiroy@kernel.org> wrote:
>
> A common issue in Makefile is a race in parallel building.
>
> You need to be careful to prevent multiple threads from writing to the
> same file simultaneously.
>
> Commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not
> generate invalid images") addressed such a bad scenario.
>
> A similar symptom occurs with the following command:
>
>   $ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
>     [ snip ]
>     SORTTAB vmlinux
>     OBJCOPY arch/loongarch/boot/vmlinux.efi
>     OBJCOPY arch/loongarch/boot/vmlinux.efi
>     PAD     arch/loongarch/boot/vmlinux.bin
>     GZIP    arch/loongarch/boot/vmlinuz
>     OBJCOPY arch/loongarch/boot/vmlinuz.o
>     LD      arch/loongarch/boot/vmlinuz.efi.elf
>     OBJCOPY arch/loongarch/boot/vmlinuz.efi
>
> The log "OBJCOPY arch/loongarch/boot/vmlinux.efi" is displayed twice.
>
> It indicates that two threads simultaneously enter arch/loongarch/boot/
> and write to arch/loongarch/boot/vmlinux.efi.
>
> It occasionally leads to a build failure:
>
>   $ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
>     [ snip ]
>     SORTTAB vmlinux
>     OBJCOPY arch/loongarch/boot/vmlinux.efi
>     PAD     arch/loongarch/boot/vmlinux.bin
>   truncate: Invalid number: ‘arch/loongarch/boot/vmlinux.bin’
>   make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13:
>   arch/loongarch/boot/vmlinux.bin] Error 1
>   make[2]: *** Deleting file 'arch/loongarch/boot/vmlinux.bin'
>   make[1]: *** [arch/loongarch/Makefile:146: vmlinuz.efi] Error 2
>   make[1]: *** Waiting for unfinished jobs....
>   make: *** [Makefile:234: __sub-make] Error 2
>
> vmlinuz.efi depends on vmlinux.efi, but such a dependency is not
> specified in arch/loongarch/Makefile.
>
> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> ---
>
>  arch/loongarch/Makefile | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile
> index 9eeb0c05f3f4..6022bf3d30c9 100644
> --- a/arch/loongarch/Makefile
> +++ b/arch/loongarch/Makefile
> @@ -142,6 +142,7 @@ vdso-install-y += arch/loongarch/vdso/vdso.so.dbg
>
>  all:   $(notdir $(KBUILD_IMAGE))
>
> +vmlinuz.efi: vmlinux.efi
>  vmlinux.elf vmlinux.efi vmlinuz.efi: vmlinux
>         $(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@
It is a little strange, because

in drivers/firmware/efi/libstub/Makefile.zboot:
vmlinuz.efi depends on vmlinuz.efi.elf, vmlinuz.efi.elf depends on
vmlinuz.o, vmlinuz.o depends on vmlinuz, vmlinuz depends on
vmlinux.bin, vmlinux.bin depends on $(EFI_ZBOOT_PAYLOAD).

in arch/loongarch/boot/Makefile,
EFI_ZBOOT_PAYLOAD := vmlinux.efi

So I think vmlinuz.efi has already depend on vmlinux.efi.

Huacai

>
> --
> 2.40.1
>
>
  
Masahiro Yamada Nov. 19, 2023, 2:24 p.m. UTC | #2
On Sun, Nov 19, 2023 at 8:59 PM Huacai Chen <chenhuacai@kernel.org> wrote:
>
> Hi, Masahiro,
>
> On Sun, Nov 19, 2023 at 1:35 PM Masahiro Yamada <masahiroy@kernel.org> wrote:
> >
> > A common issue in Makefile is a race in parallel building.
> >
> > You need to be careful to prevent multiple threads from writing to the
> > same file simultaneously.
> >
> > Commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not
> > generate invalid images") addressed such a bad scenario.
> >
> > A similar symptom occurs with the following command:
> >
> >   $ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
> >     [ snip ]
> >     SORTTAB vmlinux
> >     OBJCOPY arch/loongarch/boot/vmlinux.efi
> >     OBJCOPY arch/loongarch/boot/vmlinux.efi
> >     PAD     arch/loongarch/boot/vmlinux.bin
> >     GZIP    arch/loongarch/boot/vmlinuz
> >     OBJCOPY arch/loongarch/boot/vmlinuz.o
> >     LD      arch/loongarch/boot/vmlinuz.efi.elf
> >     OBJCOPY arch/loongarch/boot/vmlinuz.efi
> >
> > The log "OBJCOPY arch/loongarch/boot/vmlinux.efi" is displayed twice.
> >
> > It indicates that two threads simultaneously enter arch/loongarch/boot/
> > and write to arch/loongarch/boot/vmlinux.efi.
> >
> > It occasionally leads to a build failure:
> >
> >   $ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
> >     [ snip ]
> >     SORTTAB vmlinux
> >     OBJCOPY arch/loongarch/boot/vmlinux.efi
> >     PAD     arch/loongarch/boot/vmlinux.bin
> >   truncate: Invalid number: ‘arch/loongarch/boot/vmlinux.bin’
> >   make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13:
> >   arch/loongarch/boot/vmlinux.bin] Error 1
> >   make[2]: *** Deleting file 'arch/loongarch/boot/vmlinux.bin'
> >   make[1]: *** [arch/loongarch/Makefile:146: vmlinuz.efi] Error 2
> >   make[1]: *** Waiting for unfinished jobs....
> >   make: *** [Makefile:234: __sub-make] Error 2
> >
> > vmlinuz.efi depends on vmlinux.efi, but such a dependency is not
> > specified in arch/loongarch/Makefile.
> >
> > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> > ---
> >
> >  arch/loongarch/Makefile | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile
> > index 9eeb0c05f3f4..6022bf3d30c9 100644
> > --- a/arch/loongarch/Makefile
> > +++ b/arch/loongarch/Makefile
> > @@ -142,6 +142,7 @@ vdso-install-y += arch/loongarch/vdso/vdso.so.dbg
> >
> >  all:   $(notdir $(KBUILD_IMAGE))
> >
> > +vmlinuz.efi: vmlinux.efi
> >  vmlinux.elf vmlinux.efi vmlinuz.efi: vmlinux
> >         $(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@
> It is a little strange, because
>
> in drivers/firmware/efi/libstub/Makefile.zboot:
> vmlinuz.efi depends on vmlinuz.efi.elf, vmlinuz.efi.elf depends on
> vmlinuz.o, vmlinuz.o depends on vmlinuz, vmlinuz depends on
> vmlinux.bin, vmlinux.bin depends on $(EFI_ZBOOT_PAYLOAD).
>
> in arch/loongarch/boot/Makefile,
> EFI_ZBOOT_PAYLOAD := vmlinux.efi
>
> So I think vmlinuz.efi has already depend on vmlinux.efi.



That is a story in arch/loongarch/boot/Makefile.


I am talking about arch/loongarch/Makefile,
which is included from the top Makefile.


See this code.


vmlinux.elf vmlinux.efi vmlinuz.efi: vmlinux
        $(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@




Only the required dependency is

 - vmlinux.elf depends on vmlinux
 - vmlinuz.elf depends on vmlinux


vmlinux.elf and vmlinuz.elf are independent of each other.



In parallel building, GNU Make considers that
vmlinux.elf and vmlinuz.elf can be built simultaneously.


GNU Make spawns two processes to execute these simultaneously:

 $(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/vmlinux.elf
 $(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/vmlinuz.elf



The former enters arch/loongarch/boot/Makefile to build
vmlinux.elf.  (A)


The latter also enters arch/loongarch/boot/Makefile to build
vmlinuz.elf, which depends on vmlinux.elf  (B)



(A) and (B) are independent processes, hence none of them
know the other.


I hope it is clearer.






> Huacai
>
> >
> > --
> > 2.40.1
> >
> >
>
  
Huacai Chen Nov. 20, 2023, 1:33 a.m. UTC | #3
Hi, Masahiro,

On Sun, Nov 19, 2023 at 10:25 PM Masahiro Yamada <masahiroy@kernel.org> wrote:
>
> On Sun, Nov 19, 2023 at 8:59 PM Huacai Chen <chenhuacai@kernel.org> wrote:
> >
> > Hi, Masahiro,
> >
> > On Sun, Nov 19, 2023 at 1:35 PM Masahiro Yamada <masahiroy@kernel.org> wrote:
> > >
> > > A common issue in Makefile is a race in parallel building.
> > >
> > > You need to be careful to prevent multiple threads from writing to the
> > > same file simultaneously.
> > >
> > > Commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not
> > > generate invalid images") addressed such a bad scenario.
> > >
> > > A similar symptom occurs with the following command:
> > >
> > >   $ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
> > >     [ snip ]
> > >     SORTTAB vmlinux
> > >     OBJCOPY arch/loongarch/boot/vmlinux.efi
> > >     OBJCOPY arch/loongarch/boot/vmlinux.efi
> > >     PAD     arch/loongarch/boot/vmlinux.bin
> > >     GZIP    arch/loongarch/boot/vmlinuz
> > >     OBJCOPY arch/loongarch/boot/vmlinuz.o
> > >     LD      arch/loongarch/boot/vmlinuz.efi.elf
> > >     OBJCOPY arch/loongarch/boot/vmlinuz.efi
> > >
> > > The log "OBJCOPY arch/loongarch/boot/vmlinux.efi" is displayed twice.
> > >
> > > It indicates that two threads simultaneously enter arch/loongarch/boot/
> > > and write to arch/loongarch/boot/vmlinux.efi.
> > >
> > > It occasionally leads to a build failure:
> > >
> > >   $ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
> > >     [ snip ]
> > >     SORTTAB vmlinux
> > >     OBJCOPY arch/loongarch/boot/vmlinux.efi
> > >     PAD     arch/loongarch/boot/vmlinux.bin
> > >   truncate: Invalid number: ‘arch/loongarch/boot/vmlinux.bin’
> > >   make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13:
> > >   arch/loongarch/boot/vmlinux.bin] Error 1
> > >   make[2]: *** Deleting file 'arch/loongarch/boot/vmlinux.bin'
> > >   make[1]: *** [arch/loongarch/Makefile:146: vmlinuz.efi] Error 2
> > >   make[1]: *** Waiting for unfinished jobs....
> > >   make: *** [Makefile:234: __sub-make] Error 2
> > >
> > > vmlinuz.efi depends on vmlinux.efi, but such a dependency is not
> > > specified in arch/loongarch/Makefile.
> > >
> > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> > > ---
> > >
> > >  arch/loongarch/Makefile | 1 +
> > >  1 file changed, 1 insertion(+)
> > >
> > > diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile
> > > index 9eeb0c05f3f4..6022bf3d30c9 100644
> > > --- a/arch/loongarch/Makefile
> > > +++ b/arch/loongarch/Makefile
> > > @@ -142,6 +142,7 @@ vdso-install-y += arch/loongarch/vdso/vdso.so.dbg
> > >
> > >  all:   $(notdir $(KBUILD_IMAGE))
> > >
> > > +vmlinuz.efi: vmlinux.efi
> > >  vmlinux.elf vmlinux.efi vmlinuz.efi: vmlinux
> > >         $(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@
> > It is a little strange, because
> >
> > in drivers/firmware/efi/libstub/Makefile.zboot:
> > vmlinuz.efi depends on vmlinuz.efi.elf, vmlinuz.efi.elf depends on
> > vmlinuz.o, vmlinuz.o depends on vmlinuz, vmlinuz depends on
> > vmlinux.bin, vmlinux.bin depends on $(EFI_ZBOOT_PAYLOAD).
> >
> > in arch/loongarch/boot/Makefile,
> > EFI_ZBOOT_PAYLOAD := vmlinux.efi
> >
> > So I think vmlinuz.efi has already depend on vmlinux.efi.
>
>
>
> That is a story in arch/loongarch/boot/Makefile.
>
>
> I am talking about arch/loongarch/Makefile,
> which is included from the top Makefile.
>
>
> See this code.
>
>
> vmlinux.elf vmlinux.efi vmlinuz.efi: vmlinux
>         $(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@
>
>
>
>
> Only the required dependency is
>
>  - vmlinux.elf depends on vmlinux
>  - vmlinuz.elf depends on vmlinux
>
>
> vmlinux.elf and vmlinuz.elf are independent of each other.
>
>
>
> In parallel building, GNU Make considers that
> vmlinux.elf and vmlinuz.elf can be built simultaneously.
>
>
> GNU Make spawns two processes to execute these simultaneously:
>
>  $(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/vmlinux.elf
>  $(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/vmlinuz.elf
>
>
>
> The former enters arch/loongarch/boot/Makefile to build
> vmlinux.elf.  (A)
>
>
> The latter also enters arch/loongarch/boot/Makefile to build
> vmlinuz.elf, which depends on vmlinux.elf  (B)
>
>
>
> (A) and (B) are independent processes, hence none of them
> know the other.
>
>
> I hope it is clearer.
Sorry, I'm not familiar with Makefile rules, so you are probably
right, but should we do it like this (remove the direct dependency
from vmlinuz.efi to vmlinux)?

vmlinuz.efi: vmlinux.efi
vmlinux.elf vmlinux.efi: vmlinux
        $(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@

Huacai

>
>
>
>
>
>
> > Huacai
> >
> > >
> > > --
> > > 2.40.1
> > >
> > >
> >
>
>
> --
> Best Regards
> Masahiro Yamada
  
Masahiro Yamada Nov. 20, 2023, 4:45 a.m. UTC | #4
On Mon, Nov 20, 2023 at 10:33 AM Huacai Chen <chenhuacai@kernel.org> wrote:
>
> Hi, Masahiro,
>
> On Sun, Nov 19, 2023 at 10:25 PM Masahiro Yamada <masahiroy@kernel.org> wrote:
> >
> > On Sun, Nov 19, 2023 at 8:59 PM Huacai Chen <chenhuacai@kernel.org> wrote:
> > >
> > > Hi, Masahiro,
> > >
> > > On Sun, Nov 19, 2023 at 1:35 PM Masahiro Yamada <masahiroy@kernel.org> wrote:
> > > >
> > > > A common issue in Makefile is a race in parallel building.
> > > >
> > > > You need to be careful to prevent multiple threads from writing to the
> > > > same file simultaneously.
> > > >
> > > > Commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not
> > > > generate invalid images") addressed such a bad scenario.
> > > >
> > > > A similar symptom occurs with the following command:
> > > >
> > > >   $ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
> > > >     [ snip ]
> > > >     SORTTAB vmlinux
> > > >     OBJCOPY arch/loongarch/boot/vmlinux.efi
> > > >     OBJCOPY arch/loongarch/boot/vmlinux.efi
> > > >     PAD     arch/loongarch/boot/vmlinux.bin
> > > >     GZIP    arch/loongarch/boot/vmlinuz
> > > >     OBJCOPY arch/loongarch/boot/vmlinuz.o
> > > >     LD      arch/loongarch/boot/vmlinuz.efi.elf
> > > >     OBJCOPY arch/loongarch/boot/vmlinuz.efi
> > > >
> > > > The log "OBJCOPY arch/loongarch/boot/vmlinux.efi" is displayed twice.
> > > >
> > > > It indicates that two threads simultaneously enter arch/loongarch/boot/
> > > > and write to arch/loongarch/boot/vmlinux.efi.
> > > >
> > > > It occasionally leads to a build failure:
> > > >
> > > >   $ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
> > > >     [ snip ]
> > > >     SORTTAB vmlinux
> > > >     OBJCOPY arch/loongarch/boot/vmlinux.efi
> > > >     PAD     arch/loongarch/boot/vmlinux.bin
> > > >   truncate: Invalid number: ‘arch/loongarch/boot/vmlinux.bin’
> > > >   make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13:
> > > >   arch/loongarch/boot/vmlinux.bin] Error 1
> > > >   make[2]: *** Deleting file 'arch/loongarch/boot/vmlinux.bin'
> > > >   make[1]: *** [arch/loongarch/Makefile:146: vmlinuz.efi] Error 2
> > > >   make[1]: *** Waiting for unfinished jobs....
> > > >   make: *** [Makefile:234: __sub-make] Error 2
> > > >
> > > > vmlinuz.efi depends on vmlinux.efi, but such a dependency is not
> > > > specified in arch/loongarch/Makefile.
> > > >
> > > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> > > > ---
> > > >
> > > >  arch/loongarch/Makefile | 1 +
> > > >  1 file changed, 1 insertion(+)
> > > >
> > > > diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile
> > > > index 9eeb0c05f3f4..6022bf3d30c9 100644
> > > > --- a/arch/loongarch/Makefile
> > > > +++ b/arch/loongarch/Makefile
> > > > @@ -142,6 +142,7 @@ vdso-install-y += arch/loongarch/vdso/vdso.so.dbg
> > > >
> > > >  all:   $(notdir $(KBUILD_IMAGE))
> > > >
> > > > +vmlinuz.efi: vmlinux.efi
> > > >  vmlinux.elf vmlinux.efi vmlinuz.efi: vmlinux
> > > >         $(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@
> > > It is a little strange, because
> > >
> > > in drivers/firmware/efi/libstub/Makefile.zboot:
> > > vmlinuz.efi depends on vmlinuz.efi.elf, vmlinuz.efi.elf depends on
> > > vmlinuz.o, vmlinuz.o depends on vmlinuz, vmlinuz depends on
> > > vmlinux.bin, vmlinux.bin depends on $(EFI_ZBOOT_PAYLOAD).
> > >
> > > in arch/loongarch/boot/Makefile,
> > > EFI_ZBOOT_PAYLOAD := vmlinux.efi
> > >
> > > So I think vmlinuz.efi has already depend on vmlinux.efi.
> >
> >
> >
> > That is a story in arch/loongarch/boot/Makefile.
> >
> >
> > I am talking about arch/loongarch/Makefile,
> > which is included from the top Makefile.
> >
> >
> > See this code.
> >
> >
> > vmlinux.elf vmlinux.efi vmlinuz.efi: vmlinux
> >         $(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@
> >
> >
> >
> >
> > Only the required dependency is
> >
> >  - vmlinux.elf depends on vmlinux
> >  - vmlinuz.elf depends on vmlinux
> >
> >
> > vmlinux.elf and vmlinuz.elf are independent of each other.
> >
> >
> >
> > In parallel building, GNU Make considers that
> > vmlinux.elf and vmlinuz.elf can be built simultaneously.
> >
> >
> > GNU Make spawns two processes to execute these simultaneously:
> >
> >  $(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/vmlinux.elf
> >  $(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/vmlinuz.elf
> >
> >
> >
> > The former enters arch/loongarch/boot/Makefile to build
> > vmlinux.elf.  (A)
> >
> >
> > The latter also enters arch/loongarch/boot/Makefile to build
> > vmlinuz.elf, which depends on vmlinux.elf  (B)
> >
> >
> >
> > (A) and (B) are independent processes, hence none of them
> > know the other.
> >
> >
> > I hope it is clearer.
> Sorry, I'm not familiar with Makefile rules, so you are probably
> right, but should we do it like this (remove the direct dependency
> from vmlinuz.efi to vmlinux)?
>
> vmlinuz.efi: vmlinux.efi
> vmlinux.elf vmlinux.efi: vmlinux
>         $(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@



No.

It would create only vmlinux.efi because there is
no recipe line for vmlinuz.efi




vmlinuz.efi: vmlinux.efi
        $(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@
vmlinux.elf vmlinux.efi: vmlinux
        $(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@


will work, but I do not want to repeat the same recipe line.
















> Huacai
>
> >
> >
> >
> >
> >
> >
> > > Huacai
> > >
> > > >
> > > > --
> > > > 2.40.1
> > > >
> > > >
> > >
> >
> >
> > --
> > Best Regards
> > Masahiro Yamada
  
Huacai Chen Nov. 20, 2023, 6:13 a.m. UTC | #5
On Mon, Nov 20, 2023 at 12:45 PM Masahiro Yamada <masahiroy@kernel.org> wrote:
>
> On Mon, Nov 20, 2023 at 10:33 AM Huacai Chen <chenhuacai@kernel.org> wrote:
> >
> > Hi, Masahiro,
> >
> > On Sun, Nov 19, 2023 at 10:25 PM Masahiro Yamada <masahiroy@kernel.org> wrote:
> > >
> > > On Sun, Nov 19, 2023 at 8:59 PM Huacai Chen <chenhuacai@kernel.org> wrote:
> > > >
> > > > Hi, Masahiro,
> > > >
> > > > On Sun, Nov 19, 2023 at 1:35 PM Masahiro Yamada <masahiroy@kernel.org> wrote:
> > > > >
> > > > > A common issue in Makefile is a race in parallel building.
> > > > >
> > > > > You need to be careful to prevent multiple threads from writing to the
> > > > > same file simultaneously.
> > > > >
> > > > > Commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not
> > > > > generate invalid images") addressed such a bad scenario.
> > > > >
> > > > > A similar symptom occurs with the following command:
> > > > >
> > > > >   $ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
> > > > >     [ snip ]
> > > > >     SORTTAB vmlinux
> > > > >     OBJCOPY arch/loongarch/boot/vmlinux.efi
> > > > >     OBJCOPY arch/loongarch/boot/vmlinux.efi
> > > > >     PAD     arch/loongarch/boot/vmlinux.bin
> > > > >     GZIP    arch/loongarch/boot/vmlinuz
> > > > >     OBJCOPY arch/loongarch/boot/vmlinuz.o
> > > > >     LD      arch/loongarch/boot/vmlinuz.efi.elf
> > > > >     OBJCOPY arch/loongarch/boot/vmlinuz.efi
> > > > >
> > > > > The log "OBJCOPY arch/loongarch/boot/vmlinux.efi" is displayed twice.
> > > > >
> > > > > It indicates that two threads simultaneously enter arch/loongarch/boot/
> > > > > and write to arch/loongarch/boot/vmlinux.efi.
> > > > >
> > > > > It occasionally leads to a build failure:
> > > > >
> > > > >   $ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
> > > > >     [ snip ]
> > > > >     SORTTAB vmlinux
> > > > >     OBJCOPY arch/loongarch/boot/vmlinux.efi
> > > > >     PAD     arch/loongarch/boot/vmlinux.bin
> > > > >   truncate: Invalid number: ‘arch/loongarch/boot/vmlinux.bin’
> > > > >   make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13:
> > > > >   arch/loongarch/boot/vmlinux.bin] Error 1
> > > > >   make[2]: *** Deleting file 'arch/loongarch/boot/vmlinux.bin'
> > > > >   make[1]: *** [arch/loongarch/Makefile:146: vmlinuz.efi] Error 2
> > > > >   make[1]: *** Waiting for unfinished jobs....
> > > > >   make: *** [Makefile:234: __sub-make] Error 2
> > > > >
> > > > > vmlinuz.efi depends on vmlinux.efi, but such a dependency is not
> > > > > specified in arch/loongarch/Makefile.
> > > > >
> > > > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> > > > > ---
> > > > >
> > > > >  arch/loongarch/Makefile | 1 +
> > > > >  1 file changed, 1 insertion(+)
> > > > >
> > > > > diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile
> > > > > index 9eeb0c05f3f4..6022bf3d30c9 100644
> > > > > --- a/arch/loongarch/Makefile
> > > > > +++ b/arch/loongarch/Makefile
> > > > > @@ -142,6 +142,7 @@ vdso-install-y += arch/loongarch/vdso/vdso.so.dbg
> > > > >
> > > > >  all:   $(notdir $(KBUILD_IMAGE))
> > > > >
> > > > > +vmlinuz.efi: vmlinux.efi
> > > > >  vmlinux.elf vmlinux.efi vmlinuz.efi: vmlinux
> > > > >         $(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@
> > > > It is a little strange, because
> > > >
> > > > in drivers/firmware/efi/libstub/Makefile.zboot:
> > > > vmlinuz.efi depends on vmlinuz.efi.elf, vmlinuz.efi.elf depends on
> > > > vmlinuz.o, vmlinuz.o depends on vmlinuz, vmlinuz depends on
> > > > vmlinux.bin, vmlinux.bin depends on $(EFI_ZBOOT_PAYLOAD).
> > > >
> > > > in arch/loongarch/boot/Makefile,
> > > > EFI_ZBOOT_PAYLOAD := vmlinux.efi
> > > >
> > > > So I think vmlinuz.efi has already depend on vmlinux.efi.
> > >
> > >
> > >
> > > That is a story in arch/loongarch/boot/Makefile.
> > >
> > >
> > > I am talking about arch/loongarch/Makefile,
> > > which is included from the top Makefile.
> > >
> > >
> > > See this code.
> > >
> > >
> > > vmlinux.elf vmlinux.efi vmlinuz.efi: vmlinux
> > >         $(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@
> > >
> > >
> > >
> > >
> > > Only the required dependency is
> > >
> > >  - vmlinux.elf depends on vmlinux
> > >  - vmlinuz.elf depends on vmlinux
> > >
> > >
> > > vmlinux.elf and vmlinuz.elf are independent of each other.
> > >
> > >
> > >
> > > In parallel building, GNU Make considers that
> > > vmlinux.elf and vmlinuz.elf can be built simultaneously.
> > >
> > >
> > > GNU Make spawns two processes to execute these simultaneously:
> > >
> > >  $(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/vmlinux.elf
> > >  $(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/vmlinuz.elf
> > >
> > >
> > >
> > > The former enters arch/loongarch/boot/Makefile to build
> > > vmlinux.elf.  (A)
> > >
> > >
> > > The latter also enters arch/loongarch/boot/Makefile to build
> > > vmlinuz.elf, which depends on vmlinux.elf  (B)
> > >
> > >
> > >
> > > (A) and (B) are independent processes, hence none of them
> > > know the other.
> > >
> > >
> > > I hope it is clearer.
> > Sorry, I'm not familiar with Makefile rules, so you are probably
> > right, but should we do it like this (remove the direct dependency
> > from vmlinuz.efi to vmlinux)?
> >
> > vmlinuz.efi: vmlinux.efi
> > vmlinux.elf vmlinux.efi: vmlinux
> >         $(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@
>
>
>
> No.
>
> It would create only vmlinux.efi because there is
> no recipe line for vmlinuz.efi
>
>
>
>
> vmlinuz.efi: vmlinux.efi
>         $(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@
> vmlinux.elf vmlinux.efi: vmlinux
>         $(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@
>
>
> will work, but I do not want to repeat the same recipe line.
>
OK, I know, thank you very much. This patch will be applied to loongarch-fixes.

Huacai

>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> > Huacai
> >
> > >
> > >
> > >
> > >
> > >
> > >
> > > > Huacai
> > > >
> > > > >
> > > > > --
> > > > > 2.40.1
> > > > >
> > > > >
> > > >
> > >
> > >
> > > --
> > > Best Regards
> > > Masahiro Yamada
>
>
>
> --
> Best Regards
> Masahiro Yamada
  

Patch

diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile
index 9eeb0c05f3f4..6022bf3d30c9 100644
--- a/arch/loongarch/Makefile
+++ b/arch/loongarch/Makefile
@@ -142,6 +142,7 @@  vdso-install-y += arch/loongarch/vdso/vdso.so.dbg
 
 all:	$(notdir $(KBUILD_IMAGE))
 
+vmlinuz.efi: vmlinux.efi
 vmlinux.elf vmlinux.efi vmlinuz.efi: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@