diff mbox series

[v2,4/6] drm/msm/dsi: add a comment to explain pkt_per_line encoding

Message ID 20231114225857.19702-5-jonathan@marek.ca
State New
Headers
Series drm/msm: DSI DSC video mode fixes |

Commit Message

Jonathan Marek Nov. 14, 2023, 10:58 p.m. UTC 
  Make it clear why the pkt_per_line value is being "divided by 2".

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 2 ++
 1 file changed, 2 insertions(+)

Comments

Dmitry Baryshkov Nov. 15, 2023, 7:38 a.m. UTC | #1 
On Wed, 15 Nov 2023 at 01:00, Jonathan Marek <jonathan@marek.ca> wrote:
>
> Make it clear why the pkt_per_line value is being "divided by 2".
>
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---
>  drivers/gpu/drm/msm/dsi/dsi_host.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 66f198e21a7e..842765063b1b 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -877,6 +877,8 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
>         /* DSI_VIDEO_COMPRESSION_MODE & DSI_COMMAND_COMPRESSION_MODE
>          * registers have similar offsets, so for below common code use
>          * DSI_VIDEO_COMPRESSION_MODE_XXXX for setting bits
> +        *
> +        * pkt_per_line is log2 encoded, >>1 works for supported values (1,2,4)
>          */
>         reg |= DSI_VIDEO_COMPRESSION_MODE_CTRL_PKT_PER_LINE(pkt_per_line >> 1);

Should we switch to ffs() or fls() instead?

>         reg |= DSI_VIDEO_COMPRESSION_MODE_CTRL_EOL_BYTE_NUM(eol_byte_num);
> --
> 2.26.1
>
Jonathan Marek Nov. 16, 2023, 6:45 p.m. UTC | #2 
On 11/15/23 2:38 AM, Dmitry Baryshkov wrote:
> On Wed, 15 Nov 2023 at 01:00, Jonathan Marek <jonathan@marek.ca> wrote:
>>
>> Make it clear why the pkt_per_line value is being "divided by 2".
>>
>> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
>> ---
>>   drivers/gpu/drm/msm/dsi/dsi_host.c | 2 ++
>>   1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> index 66f198e21a7e..842765063b1b 100644
>> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
>> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> @@ -877,6 +877,8 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
>>          /* DSI_VIDEO_COMPRESSION_MODE & DSI_COMMAND_COMPRESSION_MODE
>>           * registers have similar offsets, so for below common code use
>>           * DSI_VIDEO_COMPRESSION_MODE_XXXX for setting bits
>> +        *
>> +        * pkt_per_line is log2 encoded, >>1 works for supported values (1,2,4)
>>           */
>>          reg |= DSI_VIDEO_COMPRESSION_MODE_CTRL_PKT_PER_LINE(pkt_per_line >> 1);
> 
> Should we switch to ffs() or fls() instead?
> 

Just a ffs() on its own can be confusing as well (without the 
information that only powers of two are possible), I think like this is 
better.

>>          reg |= DSI_VIDEO_COMPRESSION_MODE_CTRL_EOL_BYTE_NUM(eol_byte_num);
>> --
>> 2.26.1
>>
> 
>
Dmitry Baryshkov Dec. 2, 2023, 10:23 p.m. UTC | #3 
On 16/11/2023 20:45, Jonathan Marek wrote:
> On 11/15/23 2:38 AM, Dmitry Baryshkov wrote:
>> On Wed, 15 Nov 2023 at 01:00, Jonathan Marek <jonathan@marek.ca> wrote:
>>>
>>> Make it clear why the pkt_per_line value is being "divided by 2".
>>>
>>> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
>>> ---
>>>   drivers/gpu/drm/msm/dsi/dsi_host.c | 2 ++
>>>   1 file changed, 2 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c 
>>> b/drivers/gpu/drm/msm/dsi/dsi_host.c
>>> index 66f198e21a7e..842765063b1b 100644
>>> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
>>> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
>>> @@ -877,6 +877,8 @@ static void dsi_update_dsc_timing(struct 
>>> msm_dsi_host *msm_host, bool is_cmd_mod
>>>          /* DSI_VIDEO_COMPRESSION_MODE & DSI_COMMAND_COMPRESSION_MODE
>>>           * registers have similar offsets, so for below common code use
>>>           * DSI_VIDEO_COMPRESSION_MODE_XXXX for setting bits
>>> +        *
>>> +        * pkt_per_line is log2 encoded, >>1 works for supported 
>>> values (1,2,4)
>>>           */
>>>          reg |= 
>>> DSI_VIDEO_COMPRESSION_MODE_CTRL_PKT_PER_LINE(pkt_per_line >> 1);
>>
>> Should we switch to ffs() or fls() instead?
>>
> 
> Just a ffs() on its own can be confusing as well (without the 
> information that only powers of two are possible), I think like this is 
> better.

Sounds fair. Could you please then add `if (pkt_per_line > 4) 
drm_warn("pkt_per_line too big");`

With that in place:

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> 
>>>          reg |= 
>>> DSI_VIDEO_COMPRESSION_MODE_CTRL_EOL_BYTE_NUM(eol_byte_num);
>>> -- 
>>> 2.26.1
>>>
>>
>>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 66f198e21a7e..842765063b1b 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -877,6 +877,8 @@  static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
 	/* DSI_VIDEO_COMPRESSION_MODE & DSI_COMMAND_COMPRESSION_MODE
 	 * registers have similar offsets, so for below common code use
 	 * DSI_VIDEO_COMPRESSION_MODE_XXXX for setting bits
+	 *
+	 * pkt_per_line is log2 encoded, >>1 works for supported values (1,2,4)
 	 */
 	reg |= DSI_VIDEO_COMPRESSION_MODE_CTRL_PKT_PER_LINE(pkt_per_line >> 1);
 	reg |= DSI_VIDEO_COMPRESSION_MODE_CTRL_EOL_BYTE_NUM(eol_byte_num);