[4/4] media: i2c: s5c73m3: switch to using gpiod API
Commit Message
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/media/i2c/s5c73m3/s5c73m3-core.c | 63 +++++++-----------------
drivers/media/i2c/s5c73m3/s5c73m3.h | 7 +--
2 files changed, 20 insertions(+), 50 deletions(-)
Comments
On Tue, Nov 15, 2022 at 11:11 PM Dmitry Torokhov
<dmitry.torokhov@gmail.com> wrote:
> This patch switches the driver away from legacy gpio/of_gpio API to
> gpiod API, and removes use of of_get_named_gpio_flags() which I want to
> make private to gpiolib.
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Yours,
Linus Walleij
On Tue, Nov 15, 2022 at 02:11:45PM -0800, Dmitry Torokhov wrote:
> This patch switches the driver away from legacy gpio/of_gpio API to
> gpiod API, and removes use of of_get_named_gpio_flags() which I want to
> make private to gpiolib.
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
> drivers/media/i2c/s5c73m3/s5c73m3-core.c | 63 +++++++-----------------
> drivers/media/i2c/s5c73m3/s5c73m3.h | 7 +--
> 2 files changed, 20 insertions(+), 50 deletions(-)
>
> diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
> index 561c1a1583ac..f1e073ed5f99 100644
> --- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c
> +++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
> @@ -10,12 +10,11 @@
> #include <linux/clk.h>
> #include <linux/delay.h>
> #include <linux/firmware.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/i2c.h>
> #include <linux/init.h>
> #include <linux/media.h>
> #include <linux/module.h>
> -#include <linux/of_gpio.h>
> #include <linux/of_graph.h>
> #include <linux/regulator/consumer.h>
> #include <linux/sizes.h>
> @@ -1348,20 +1347,20 @@ static int s5c73m3_oif_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
>
> static int s5c73m3_gpio_set_value(struct s5c73m3 *priv, int id, u32 val)
> {
> - if (!gpio_is_valid(priv->gpio[id].gpio))
> + if (!priv->gpio[id])
> return 0;
> - gpio_set_value(priv->gpio[id].gpio, !!val);
> + gpiod_set_value_cansleep(priv->gpio[id], val);
> return 1;
> }
>
> static int s5c73m3_gpio_assert(struct s5c73m3 *priv, int id)
> {
> - return s5c73m3_gpio_set_value(priv, id, priv->gpio[id].level);
> + return s5c73m3_gpio_set_value(priv, id, 1);
> }
>
> static int s5c73m3_gpio_deassert(struct s5c73m3 *priv, int id)
> {
> - return s5c73m3_gpio_set_value(priv, id, !priv->gpio[id].level);
> + return s5c73m3_gpio_set_value(priv, id, 0);
> }
>
> static int __s5c73m3_power_on(struct s5c73m3 *state)
> @@ -1544,49 +1543,29 @@ static const struct v4l2_subdev_ops oif_subdev_ops = {
>
> static int s5c73m3_configure_gpios(struct s5c73m3 *state)
> {
> - static const char * const gpio_names[] = {
> - "S5C73M3_STBY", "S5C73M3_RST"
> - };
> + static const char * const name[] = { "standby", "xshutdown" };
> + static const char * const label[] = { "S5C73M3_STBY", "S5C73M3_RST" };
> struct i2c_client *c = state->i2c_client;
> - struct s5c73m3_gpio *g = state->gpio;
> + struct gpio_desc *gpio;
> int ret, i;
>
> for (i = 0; i < GPIO_NUM; ++i) {
> - unsigned int flags = GPIOF_DIR_OUT;
> - if (g[i].level)
> - flags |= GPIOF_INIT_HIGH;
> - ret = devm_gpio_request_one(&c->dev, g[i].gpio, flags,
> - gpio_names[i]);
> + gpio = devm_gpiod_get(&c->dev, name[i], GPIOD_OUT_HIGH);
> + ret = PTR_ERR_OR_ZERO(gpio);
> if (ret) {
> - v4l2_err(c, "failed to request gpio %s\n",
> - gpio_names[i]);
> + v4l2_err(c, "failed to request gpio %s: %d\n",
> + name[i], ret);
> return ret;
> }
> - }
> - return 0;
> -}
> -
> -static int s5c73m3_parse_gpios(struct s5c73m3 *state)
> -{
> - static const char * const prop_names[] = {
> - "standby-gpios", "xshutdown-gpios",
> - };
> - struct device *dev = &state->i2c_client->dev;
> - struct device_node *node = dev->of_node;
> - int ret, i;
>
> - for (i = 0; i < GPIO_NUM; ++i) {
> - enum of_gpio_flags of_flags;
> -
> - ret = of_get_named_gpio_flags(node, prop_names[i],
> - 0, &of_flags);
> - if (ret < 0) {
> - dev_err(dev, "failed to parse %s DT property\n",
> - prop_names[i]);
> - return -EINVAL;
> + ret = gpiod_set_consumer_name(gpio, label[i]);
> + if (ret) {
> + v4l2_err(c, "failed to set up name for gpio %s: %d\n",
> + name[i], ret);
> + return ret;
> }
> - state->gpio[i].gpio = ret;
> - state->gpio[i].level = !(of_flags & OF_GPIO_ACTIVE_LOW);
> +
> + state->gpio[i] = gpio;
> }
> return 0;
> }
> @@ -1613,10 +1592,6 @@ static int s5c73m3_get_dt_data(struct s5c73m3 *state)
> state->mclk_frequency);
> }
>
> - ret = s5c73m3_parse_gpios(state);
> - if (ret < 0)
> - return -EINVAL;
> -
> node_ep = of_graph_get_next_endpoint(node, NULL);
> if (!node_ep) {
> dev_warn(dev, "no endpoint defined for node: %pOF\n", node);
> diff --git a/drivers/media/i2c/s5c73m3/s5c73m3.h b/drivers/media/i2c/s5c73m3/s5c73m3.h
> index d68528898249..9887d03fcdeb 100644
> --- a/drivers/media/i2c/s5c73m3/s5c73m3.h
> +++ b/drivers/media/i2c/s5c73m3/s5c73m3.h
> @@ -356,11 +356,6 @@ enum s5c73m3_gpio_id {
> GPIO_NUM,
> };
>
> -struct s5c73m3_gpio {
> - int gpio;
> - int level;
> -};
> -
> enum s5c73m3_resolution_types {
> RES_ISP,
> RES_JPEG,
> @@ -387,7 +382,7 @@ struct s5c73m3 {
> u32 i2c_read_address;
>
> struct regulator_bulk_data supplies[S5C73M3_MAX_SUPPLIES];
> - struct s5c73m3_gpio gpio[GPIO_NUM];
> + struct gpio_desc *gpio[GPIO_NUM];
>
> struct clk *clock;
>
> --
> 2.38.1.431.g37b22c650d-goog
>
Looks good to me.
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Hi Linus,
On 17/11/2022 10:06, Linus Walleij wrote:
> On Tue, Nov 15, 2022 at 11:11 PM Dmitry Torokhov
> <dmitry.torokhov@gmail.com> wrote:
>
>> This patch switches the driver away from legacy gpio/of_gpio API to
>> gpiod API, and removes use of of_get_named_gpio_flags() which I want to
>> make private to gpiolib.
>>
>> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
There are now two patches that do this switch to using the gpiod API:
this one, and one from you:
https://patchwork.linuxtv.org/project/linux-media/patch/20221108100604.1500909-1-linus.walleij@linaro.org/
Any preference?
Regards,
Hans
On 26/11/2022 11:34, Hans Verkuil wrote:
> Hi Linus,
>
> On 17/11/2022 10:06, Linus Walleij wrote:
>> On Tue, Nov 15, 2022 at 11:11 PM Dmitry Torokhov
>> <dmitry.torokhov@gmail.com> wrote:
>>
>>> This patch switches the driver away from legacy gpio/of_gpio API to
>>> gpiod API, and removes use of of_get_named_gpio_flags() which I want to
>>> make private to gpiolib.
>>>
>>> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
>>
>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>
> There are now two patches that do this switch to using the gpiod API:
> this one, and one from you:
>
> https://patchwork.linuxtv.org/project/linux-media/patch/20221108100604.1500909-1-linus.walleij@linaro.org/
And a third one as well:
https://patchwork.linuxtv.org/project/linux-media/patch/20221116194307.164543-1-mairacanal@riseup.net/
>
> Any preference?
>
> Regards,
>
> Hans
On Sat, Nov 26, 2022 at 11:34 AM Hans Verkuil <hverkuil@xs4all.nl> wrote:
> On 17/11/2022 10:06, Linus Walleij wrote:
> > On Tue, Nov 15, 2022 at 11:11 PM Dmitry Torokhov
> > <dmitry.torokhov@gmail.com> wrote:
> >
> >> This patch switches the driver away from legacy gpio/of_gpio API to
> >> gpiod API, and removes use of of_get_named_gpio_flags() which I want to
> >> make private to gpiolib.
> >>
> >> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> >
> > Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>
> There are now two patches that do this switch to using the gpiod API:
> this one, and one from you:
Ooops we stepped on each others' toes again. Dmitry & I really like
to fix these drivers :D sorry about that.
> https://patchwork.linuxtv.org/project/linux-media/patch/20221108100604.1500909-1-linus.walleij@linaro.org/
>
> Any preference?
Not really, take the one you like best, they look functionally equivalent to me,
just slightly different stylistic choices.
Yours,
Linus Walleij
@@ -10,12 +10,11 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/firmware.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/media.h>
#include <linux/module.h>
-#include <linux/of_gpio.h>
#include <linux/of_graph.h>
#include <linux/regulator/consumer.h>
#include <linux/sizes.h>
@@ -1348,20 +1347,20 @@ static int s5c73m3_oif_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
static int s5c73m3_gpio_set_value(struct s5c73m3 *priv, int id, u32 val)
{
- if (!gpio_is_valid(priv->gpio[id].gpio))
+ if (!priv->gpio[id])
return 0;
- gpio_set_value(priv->gpio[id].gpio, !!val);
+ gpiod_set_value_cansleep(priv->gpio[id], val);
return 1;
}
static int s5c73m3_gpio_assert(struct s5c73m3 *priv, int id)
{
- return s5c73m3_gpio_set_value(priv, id, priv->gpio[id].level);
+ return s5c73m3_gpio_set_value(priv, id, 1);
}
static int s5c73m3_gpio_deassert(struct s5c73m3 *priv, int id)
{
- return s5c73m3_gpio_set_value(priv, id, !priv->gpio[id].level);
+ return s5c73m3_gpio_set_value(priv, id, 0);
}
static int __s5c73m3_power_on(struct s5c73m3 *state)
@@ -1544,49 +1543,29 @@ static const struct v4l2_subdev_ops oif_subdev_ops = {
static int s5c73m3_configure_gpios(struct s5c73m3 *state)
{
- static const char * const gpio_names[] = {
- "S5C73M3_STBY", "S5C73M3_RST"
- };
+ static const char * const name[] = { "standby", "xshutdown" };
+ static const char * const label[] = { "S5C73M3_STBY", "S5C73M3_RST" };
struct i2c_client *c = state->i2c_client;
- struct s5c73m3_gpio *g = state->gpio;
+ struct gpio_desc *gpio;
int ret, i;
for (i = 0; i < GPIO_NUM; ++i) {
- unsigned int flags = GPIOF_DIR_OUT;
- if (g[i].level)
- flags |= GPIOF_INIT_HIGH;
- ret = devm_gpio_request_one(&c->dev, g[i].gpio, flags,
- gpio_names[i]);
+ gpio = devm_gpiod_get(&c->dev, name[i], GPIOD_OUT_HIGH);
+ ret = PTR_ERR_OR_ZERO(gpio);
if (ret) {
- v4l2_err(c, "failed to request gpio %s\n",
- gpio_names[i]);
+ v4l2_err(c, "failed to request gpio %s: %d\n",
+ name[i], ret);
return ret;
}
- }
- return 0;
-}
-
-static int s5c73m3_parse_gpios(struct s5c73m3 *state)
-{
- static const char * const prop_names[] = {
- "standby-gpios", "xshutdown-gpios",
- };
- struct device *dev = &state->i2c_client->dev;
- struct device_node *node = dev->of_node;
- int ret, i;
- for (i = 0; i < GPIO_NUM; ++i) {
- enum of_gpio_flags of_flags;
-
- ret = of_get_named_gpio_flags(node, prop_names[i],
- 0, &of_flags);
- if (ret < 0) {
- dev_err(dev, "failed to parse %s DT property\n",
- prop_names[i]);
- return -EINVAL;
+ ret = gpiod_set_consumer_name(gpio, label[i]);
+ if (ret) {
+ v4l2_err(c, "failed to set up name for gpio %s: %d\n",
+ name[i], ret);
+ return ret;
}
- state->gpio[i].gpio = ret;
- state->gpio[i].level = !(of_flags & OF_GPIO_ACTIVE_LOW);
+
+ state->gpio[i] = gpio;
}
return 0;
}
@@ -1613,10 +1592,6 @@ static int s5c73m3_get_dt_data(struct s5c73m3 *state)
state->mclk_frequency);
}
- ret = s5c73m3_parse_gpios(state);
- if (ret < 0)
- return -EINVAL;
-
node_ep = of_graph_get_next_endpoint(node, NULL);
if (!node_ep) {
dev_warn(dev, "no endpoint defined for node: %pOF\n", node);
@@ -356,11 +356,6 @@ enum s5c73m3_gpio_id {
GPIO_NUM,
};
-struct s5c73m3_gpio {
- int gpio;
- int level;
-};
-
enum s5c73m3_resolution_types {
RES_ISP,
RES_JPEG,
@@ -387,7 +382,7 @@ struct s5c73m3 {
u32 i2c_read_address;
struct regulator_bulk_data supplies[S5C73M3_MAX_SUPPLIES];
- struct s5c73m3_gpio gpio[GPIO_NUM];
+ struct gpio_desc *gpio[GPIO_NUM];
struct clk *clock;