[v10,4/5] drivers/perf: add DesignWare PCIe PMU driver

Message ID 20231104133216.42056-5-xueshuai@linux.alibaba.com
State New
Headers
Series drivers/perf: add Synopsys DesignWare PCIe PMU driver support |

Commit Message

Shuai Xue Nov. 4, 2023, 1:32 p.m. UTC
  This commit adds the PCIe Performance Monitoring Unit (PMU) driver support
for T-Head Yitian SoC chip. Yitian is based on the Synopsys PCI Express
Core controller IP which provides statistics feature. The PMU is a PCIe
configuration space register block provided by each PCIe Root Port in a
Vendor-Specific Extended Capability named RAS D.E.S (Debug, Error
injection, and Statistics).

To facilitate collection of statistics the controller provides the
following two features for each Root Port:

- one 64-bit counter for Time Based Analysis (RX/TX data throughput and
  time spent in each low-power LTSSM state) and
- one 32-bit counter for Event Counting (error and non-error events for
  a specified lane)

Note: There is no interrupt for counter overflow.

This driver adds PMU devices for each PCIe Root Port. And the PMU device is
named based the BDF of Root Port. For example,

    30:03.0 PCI bridge: Device 1ded:8000 (rev 01)

the PMU device name for this Root Port is dwc_rootport_3018.

Example usage of counting PCIe RX TLP data payload (Units of bytes)::

    $# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/

average RX bandwidth can be calculated like this:

    PCIe TX Bandwidth = Rx_PCIe_TLP_Data_Payload / Measure_Time_Window

Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
---
 drivers/perf/Kconfig        |   7 +
 drivers/perf/Makefile       |   1 +
 drivers/perf/dwc_pcie_pmu.c | 798 ++++++++++++++++++++++++++++++++++++
 3 files changed, 806 insertions(+)
 create mode 100644 drivers/perf/dwc_pcie_pmu.c
  

Comments

Ilkka Koskinen Nov. 15, 2023, 12:07 a.m. UTC | #1
Hi Shuai,

On Sat, 4 Nov 2023, Shuai Xue wrote:
> This commit adds the PCIe Performance Monitoring Unit (PMU) driver support
> for T-Head Yitian SoC chip. Yitian is based on the Synopsys PCI Express
> Core controller IP which provides statistics feature. The PMU is a PCIe
> configuration space register block provided by each PCIe Root Port in a
> Vendor-Specific Extended Capability named RAS D.E.S (Debug, Error
> injection, and Statistics).
>
> To facilitate collection of statistics the controller provides the
> following two features for each Root Port:
>
> - one 64-bit counter for Time Based Analysis (RX/TX data throughput and
>  time spent in each low-power LTSSM state) and
> - one 32-bit counter for Event Counting (error and non-error events for
>  a specified lane)
>
> Note: There is no interrupt for counter overflow.
>
> This driver adds PMU devices for each PCIe Root Port. And the PMU device is
> named based the BDF of Root Port. For example,
>
>    30:03.0 PCI bridge: Device 1ded:8000 (rev 01)
>
> the PMU device name for this Root Port is dwc_rootport_3018.
>
> Example usage of counting PCIe RX TLP data payload (Units of bytes)::
>
>    $# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/
>
> average RX bandwidth can be calculated like this:
>
>    PCIe TX Bandwidth = Rx_PCIe_TLP_Data_Payload / Measure_Time_Window
>
> Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>

Thanks for the driver! I finally found some time to test your driver on 
AmpereOne and it seemed to work fine. I had to do a couple of changes 
though such as adding Ampere vendor ID and support multiple PCIe domains. 
Given your driver is already in v10 and you have got quite a few 
reviewed and acked bys, I wonder if it's better to add my changes to 
your patches or me to create new patches on top of yours? I'm fine with 
either. Any thoughts?

Cheers, Ilkka
  
Shuai Xue Nov. 15, 2023, 1:26 a.m. UTC | #2
On 2023/11/15 08:07, Ilkka Koskinen wrote:
> 
> Hi Shuai,
> 
> On Sat, 4 Nov 2023, Shuai Xue wrote:
>> This commit adds the PCIe Performance Monitoring Unit (PMU) driver support
>> for T-Head Yitian SoC chip. Yitian is based on the Synopsys PCI Express
>> Core controller IP which provides statistics feature. The PMU is a PCIe
>> configuration space register block provided by each PCIe Root Port in a
>> Vendor-Specific Extended Capability named RAS D.E.S (Debug, Error
>> injection, and Statistics).
>>
>> To facilitate collection of statistics the controller provides the
>> following two features for each Root Port:
>>
>> - one 64-bit counter for Time Based Analysis (RX/TX data throughput and
>>  time spent in each low-power LTSSM state) and
>> - one 32-bit counter for Event Counting (error and non-error events for
>>  a specified lane)
>>
>> Note: There is no interrupt for counter overflow.
>>
>> This driver adds PMU devices for each PCIe Root Port. And the PMU device is
>> named based the BDF of Root Port. For example,
>>
>>    30:03.0 PCI bridge: Device 1ded:8000 (rev 01)
>>
>> the PMU device name for this Root Port is dwc_rootport_3018.
>>
>> Example usage of counting PCIe RX TLP data payload (Units of bytes)::
>>
>>    $# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/
>>
>> average RX bandwidth can be calculated like this:
>>
>>    PCIe TX Bandwidth = Rx_PCIe_TLP_Data_Payload / Measure_Time_Window
>>
>> Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
>> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
>> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>> Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
> 
> Thanks for the driver! I finally found some time to test your driver on AmpereOne and it seemed to work fine. 

Glad to hear that. Could you please explicitly give me you tested-by tag? I could add it in next version.

I had to do a couple of changes though such as adding Ampere vendor ID and support multiple PCIe domains. Given your driver is already in v10 and you have got quite a few reviewed and acked bys, I wonder if it's better to add my changes to your patches or me to create new patches on top of yours? I'm fine with either. Any thoughts?

I prefer new separate patches, so that we can review them in a new loop.

> 
> Cheers, Ilkka

Best Regard,
Shuai
  
Ilkka Koskinen Nov. 16, 2023, 12:48 a.m. UTC | #3
On Wed, 15 Nov 2023, Shuai Xue wrote:
> On 2023/11/15 08:07, Ilkka Koskinen wrote:
>>
>> Hi Shuai,
>>
>> On Sat, 4 Nov 2023, Shuai Xue wrote:
>>> This commit adds the PCIe Performance Monitoring Unit (PMU) driver support
>>> for T-Head Yitian SoC chip. Yitian is based on the Synopsys PCI Express
>>> Core controller IP which provides statistics feature. The PMU is a PCIe
>>> configuration space register block provided by each PCIe Root Port in a
>>> Vendor-Specific Extended Capability named RAS D.E.S (Debug, Error
>>> injection, and Statistics).
>>>
>>> To facilitate collection of statistics the controller provides the
>>> following two features for each Root Port:
>>>
>>> - one 64-bit counter for Time Based Analysis (RX/TX data throughput and
>>>  time spent in each low-power LTSSM state) and
>>> - one 32-bit counter for Event Counting (error and non-error events for
>>>  a specified lane)
>>>
>>> Note: There is no interrupt for counter overflow.
>>>
>>> This driver adds PMU devices for each PCIe Root Port. And the PMU device is
>>> named based the BDF of Root Port. For example,
>>>
>>>    30:03.0 PCI bridge: Device 1ded:8000 (rev 01)
>>>
>>> the PMU device name for this Root Port is dwc_rootport_3018.
>>>
>>> Example usage of counting PCIe RX TLP data payload (Units of bytes)::
>>>
>>>    $# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/
>>>
>>> average RX bandwidth can be calculated like this:
>>>
>>>    PCIe TX Bandwidth = Rx_PCIe_TLP_Data_Payload / Measure_Time_Window
>>>
>>> Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
>>> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
>>> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>>> Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
>>
>> Thanks for the driver! I finally found some time to test your driver on AmpereOne and it seemed to work fine.
>
> Glad to hear that. Could you please explicitly give me you tested-by tag? I could add it in next version.

Sure, I'll reply to the cover letter mail.

>> I had to do a couple of changes though such as adding Ampere vendor ID
and support multiple PCIe domains. Given your driver is already in v10 and you have got quite a few reviewed and acked bys, I wonder if it's better to add my changes to your patches or me to create new patches on top of yours? I'm fine with either. Any thoughts?
>
> I prefer new separate patches, so that we can review them in a new loop.

Sounds good to me.

Cheers, Ilkka

>
>>
>> Cheers, Ilkka
>
> Best Regard,
> Shuai
>
  
Ilkka Koskinen Nov. 16, 2023, 3:50 a.m. UTC | #4
Hi Shuai,

I have a few comments below


On Sat, 4 Nov 2023, Shuai Xue wrote:
> This commit adds the PCIe Performance Monitoring Unit (PMU) driver support
> for T-Head Yitian SoC chip. Yitian is based on the Synopsys PCI Express
> Core controller IP which provides statistics feature. The PMU is a PCIe
> configuration space register block provided by each PCIe Root Port in a
> Vendor-Specific Extended Capability named RAS D.E.S (Debug, Error
> injection, and Statistics).
>
> To facilitate collection of statistics the controller provides the
> following two features for each Root Port:
>
> - one 64-bit counter for Time Based Analysis (RX/TX data throughput and
>  time spent in each low-power LTSSM state) and
> - one 32-bit counter for Event Counting (error and non-error events for
>  a specified lane)
>
> Note: There is no interrupt for counter overflow.
>
> This driver adds PMU devices for each PCIe Root Port. And the PMU device is
> named based the BDF of Root Port. For example,
>
>    30:03.0 PCI bridge: Device 1ded:8000 (rev 01)
>
> the PMU device name for this Root Port is dwc_rootport_3018.
>
> Example usage of counting PCIe RX TLP data payload (Units of bytes)::
>
>    $# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/
>
> average RX bandwidth can be calculated like this:
>
>    PCIe TX Bandwidth = Rx_PCIe_TLP_Data_Payload / Measure_Time_Window
>
> Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
> ---
> drivers/perf/Kconfig        |   7 +
> drivers/perf/Makefile       |   1 +
> drivers/perf/dwc_pcie_pmu.c | 798 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 806 insertions(+)
> create mode 100644 drivers/perf/dwc_pcie_pmu.c

...

> diff --git a/drivers/perf/dwc_pcie_pmu.c b/drivers/perf/dwc_pcie_pmu.c
> new file mode 100644
> index 000000000000..9485c41de322
> --- /dev/null
> +++ b/drivers/perf/dwc_pcie_pmu.c
> @@ -0,0 +1,798 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Synopsys DesignWare PCIe PMU driver
> + *
> + * Copyright (C) 2021-2023 Alibaba Inc.
> + */
> +

...

> +static void dwc_pcie_pmu_time_based_event_enable(struct dwc_pcie_pmu *pcie_pmu,
> +					  bool enable)
> +{
> +	struct pci_dev *pdev = pcie_pmu->pdev;
> +	u16 ras_des_offset = pcie_pmu->ras_des_offset;
> +
> +	if (enable)
> +		pci_clear_and_set_dword(pdev,
> +			ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL,
> +			DWC_PCIE_TIME_BASED_TIMER_START, 0x1);
> +	else
> +		pci_clear_and_set_dword(pdev,
> +			ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL,
> +			DWC_PCIE_TIME_BASED_TIMER_START, 0x0);

It's a matter of taste, but you could simply do:

     pci_clear_and_set_dword(pdev,
                  ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL,
                  DWC_PCIE_TIME_BASED_TIMER_START, enable);


However, I'm fine with either way.

> +static u64 dwc_pcie_pmu_read_lane_event_counter(struct perf_event *event)
> +{
> +	struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(event->pmu);
> +	struct pci_dev *pdev = pcie_pmu->pdev;
> +	u16 ras_des_offset = pcie_pmu->ras_des_offset;
> +	u32 val;
> +
> +	pci_read_config_dword(pdev, ras_des_offset + DWC_PCIE_EVENT_CNT_DATA, &val);
> +
> +	return val;
> +}

...

> +static int dwc_pcie_register_dev(struct pci_dev *pdev)
> +{
> +	struct platform_device *plat_dev;
> +	struct dwc_pcie_dev_info *dev_info;
> +	int ret;
> +	u32 bdf;
> +
> +	bdf = PCI_DEVID(pdev->bus->number, pdev->devfn);
> +	plat_dev = platform_device_register_data(NULL, "dwc_pcie_pmu", bdf,
> +						 pdev, sizeof(*pdev));
> +	ret = PTR_ERR_OR_ZERO(plat_dev);
> +	if (ret)
> +             return ret;

platform_device_register_data() doesn't return a null pointer and you 
don't really need 'ret'. You could do something like instead:

    if (IS_ERR(plat_dev))
           return PTR_ERR(plat_dev);

> +	dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL);
> +	if (!dev_info)
> +		return -ENOMEM;
> +
> +	/* Cache platform device to handle pci device hotplug */
> +	dev_info->plat_dev = plat_dev;
> +	dev_info->pdev = pdev;
> +	list_add(&dev_info->dev_node, &dwc_pcie_dev_info_head);
> +
> +	return 0;
> +}
> +
> +static int dwc_pcie_pmu_notifier(struct notifier_block *nb,
> +				     unsigned long action, void *data)
> +{
> +	struct device *dev = data;
> +	struct pci_dev *pdev = to_pci_dev(dev);
> +	struct dwc_pcie_dev_info *dev_info;
> +
> +	switch (action) {
> +	case BUS_NOTIFY_ADD_DEVICE:
> +		if (!dwc_pcie_match_des_cap(pdev))
> +			return NOTIFY_DONE;
> +		if (dwc_pcie_register_dev(pdev))
> +			return NOTIFY_BAD;
> +		break;
> +	case BUS_NOTIFY_DEL_DEVICE:
> +		dev_info = dwc_pcie_find_dev_info(pdev);
> +		if (!dev_info)
> +			return NOTIFY_DONE;
> +		dwc_pcie_unregister_dev(dev_info);
> +		break;
> +	}
> +
> +	return NOTIFY_OK;
> +}
> +
> +static struct notifier_block dwc_pcie_pmu_nb = {
> +	.notifier_call = dwc_pcie_pmu_notifier,
> +};
> +
> +static int dwc_pcie_pmu_probe(struct platform_device *plat_dev)
> +{
> +	struct pci_dev *pdev = plat_dev->dev.platform_data;
> +	struct dwc_pcie_pmu *pcie_pmu;
> +	char *name;
> +	u32 bdf, val;
> +	u16 vsec;
> +	int ret;
> +
> +	vsec = pci_find_vsec_capability(pdev, PCI_VENDOR_ID_ALIBABA,
> +					DWC_PCIE_VSEC_RAS_DES_ID);

You nicely changed to use vendor list in this version but here the driver 
still tries to find Alibaba specific capability. I guess, you could search 
again using the vendor list. The other option would be to make 
dwc_pcie_match_des_cap() to return the vendor id, pass it to 
dwc_pcie_register_dev(), which would add it to device's platform data with
the pointer to the pci device.

Cheers, Ilkka


> +	pci_read_config_dword(pdev, vsec + PCI_VNDR_HEADER, &val);
> +	bdf = PCI_DEVID(pdev->bus->number, pdev->devfn);
> +	name = devm_kasprintf(&plat_dev->dev, GFP_KERNEL, "dwc_rootport_%x", bdf);
> +	if (!name)
> +		return -ENOMEM;
> +
> +	pcie_pmu = devm_kzalloc(&plat_dev->dev, sizeof(*pcie_pmu), GFP_KERNEL);
> +	if (!pcie_pmu)
> +		return -ENOMEM;
> +
> +	pcie_pmu->pdev = pdev;
> +	pcie_pmu->ras_des_offset = vsec;
> +	pcie_pmu->nr_lanes = pcie_get_width_cap(pdev);
> +	pcie_pmu->on_cpu = -1;
> +	pcie_pmu->pmu = (struct pmu){
> +		.name		= name,
> +		.parent		= &pdev->dev,
> +		.module		= THIS_MODULE,
> +		.attr_groups	= dwc_pcie_attr_groups,
> +		.capabilities	= PERF_PMU_CAP_NO_EXCLUDE,
> +		.task_ctx_nr	= perf_invalid_context,
> +		.event_init	= dwc_pcie_pmu_event_init,
> +		.add		= dwc_pcie_pmu_event_add,
> +		.del		= dwc_pcie_pmu_event_del,
> +		.start		= dwc_pcie_pmu_event_start,
> +		.stop		= dwc_pcie_pmu_event_stop,
> +		.read		= dwc_pcie_pmu_event_update,
> +	};
> +
> +	/* Add this instance to the list used by the offline callback */
> +	ret = cpuhp_state_add_instance(dwc_pcie_pmu_hp_state,
> +				       &pcie_pmu->cpuhp_node);
> +	if (ret) {
> +		pci_err(pdev, "Error %d registering hotplug @%x\n", ret, bdf);
> +		return ret;
> +	}
> +
> +	/* Unwind when platform driver removes */
> +	ret = devm_add_action_or_reset(&plat_dev->dev,
> +				       dwc_pcie_pmu_remove_cpuhp_instance,
> +				       &pcie_pmu->cpuhp_node);
> +	if (ret)
> +		return ret;
> +
> +	ret = perf_pmu_register(&pcie_pmu->pmu, name, -1);
> +	if (ret) {
> +		pci_err(pdev, "Error %d registering PMU @%x\n", ret, bdf);
> +		return ret;
> +	}
> +	ret = devm_add_action_or_reset(&plat_dev->dev, dwc_pcie_unregister_pmu,
> +				       pcie_pmu);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
  
Shuai Xue Nov. 16, 2023, 8:02 a.m. UTC | #5
On 2023/11/16 11:50, Ilkka Koskinen wrote:
> 
> Hi Shuai,
> 
> I have a few comments below
> 
> 
...
> 
>> +static void dwc_pcie_pmu_time_based_event_enable(struct dwc_pcie_pmu *pcie_pmu,
>> +                      bool enable)
>> +{
>> +    struct pci_dev *pdev = pcie_pmu->pdev;
>> +    u16 ras_des_offset = pcie_pmu->ras_des_offset;
>> +
>> +    if (enable)
>> +        pci_clear_and_set_dword(pdev,
>> +            ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL,
>> +            DWC_PCIE_TIME_BASED_TIMER_START, 0x1);
>> +    else
>> +        pci_clear_and_set_dword(pdev,
>> +            ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL,
>> +            DWC_PCIE_TIME_BASED_TIMER_START, 0x0);
> 
> It's a matter of taste, but you could simply do:
> 
>     pci_clear_and_set_dword(pdev,
>                  ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL,
>                  DWC_PCIE_TIME_BASED_TIMER_START, enable);
> 
> 
> However, I'm fine with either way.

Good suggestion, will fix it.

> 
>> +static u64 dwc_pcie_pmu_read_lane_event_counter(struct perf_event *event)
>> +{
>> +    struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(event->pmu);
>> +    struct pci_dev *pdev = pcie_pmu->pdev;
>> +    u16 ras_des_offset = pcie_pmu->ras_des_offset;
>> +    u32 val;
>> +
>> +    pci_read_config_dword(pdev, ras_des_offset + DWC_PCIE_EVENT_CNT_DATA, &val);
>> +
>> +    return val;
>> +}
> 
> ...
> 
>> +static int dwc_pcie_register_dev(struct pci_dev *pdev)
>> +{
>> +    struct platform_device *plat_dev;
>> +    struct dwc_pcie_dev_info *dev_info;
>> +    int ret;
>> +    u32 bdf;
>> +
>> +    bdf = PCI_DEVID(pdev->bus->number, pdev->devfn);
>> +    plat_dev = platform_device_register_data(NULL, "dwc_pcie_pmu", bdf,
>> +                         pdev, sizeof(*pdev));
>> +    ret = PTR_ERR_OR_ZERO(plat_dev);
>> +    if (ret)
>> +             return ret;
> 
> platform_device_register_data() doesn't return a null pointer and you don't really need 'ret'. You could do something like instead:
> 
>    if (IS_ERR(plat_dev))
>           return PTR_ERR(plat_dev);
> 
>> +    dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL);
>> +    if (!dev_info)
>> +        return -ENOMEM;
>> +
>> +    /* Cache platform device to handle pci device hotplug */
>> +    dev_info->plat_dev = plat_dev;
>> +    dev_info->pdev = pdev;
>> +    list_add(&dev_info->dev_node, &dwc_pcie_dev_info_head);
>> +
>> +    return 0;
>> +}
>> +
>> +static int dwc_pcie_pmu_notifier(struct notifier_block *nb,
>> +                     unsigned long action, void *data)
>> +{
>> +    struct device *dev = data;
>> +    struct pci_dev *pdev = to_pci_dev(dev);
>> +    struct dwc_pcie_dev_info *dev_info;
>> +
>> +    switch (action) {
>> +    case BUS_NOTIFY_ADD_DEVICE:
>> +        if (!dwc_pcie_match_des_cap(pdev))
>> +            return NOTIFY_DONE;
>> +        if (dwc_pcie_register_dev(pdev))
>> +            return NOTIFY_BAD;
>> +        break;
>> +    case BUS_NOTIFY_DEL_DEVICE:
>> +        dev_info = dwc_pcie_find_dev_info(pdev);
>> +        if (!dev_info)
>> +            return NOTIFY_DONE;
>> +        dwc_pcie_unregister_dev(dev_info);
>> +        break;
>> +    }
>> +
>> +    return NOTIFY_OK;
>> +}
>> +
>> +static struct notifier_block dwc_pcie_pmu_nb = {
>> +    .notifier_call = dwc_pcie_pmu_notifier,
>> +};
>> +
>> +static int dwc_pcie_pmu_probe(struct platform_device *plat_dev)
>> +{
>> +    struct pci_dev *pdev = plat_dev->dev.platform_data;
>> +    struct dwc_pcie_pmu *pcie_pmu;
>> +    char *name;
>> +    u32 bdf, val;
>> +    u16 vsec;
>> +    int ret;
>> +
>> +    vsec = pci_find_vsec_capability(pdev, PCI_VENDOR_ID_ALIBABA,
>> +                    DWC_PCIE_VSEC_RAS_DES_ID);
> 
> You nicely changed to use vendor list in this version but here the driver still tries to find Alibaba specific capability.

Sorry, I missed here.

> I guess, you could search again using the vendor list. The other option would be to make dwc_pcie_match_des_cap() to return the vendor id, pass it to dwc_pcie_register_dev(), which would add it to device's platform data with
> the pointer to the pci device.

The dwc_pcie_pmu_probe() is called by device which has DWC_PCIE_VSEC_RAS_DES_ID cap.
So I guess I can use pdev->vendor directly here, e.g?

	pci_find_vsec_capability(pdev, pdev->vendor, DWC_PCIE_VSEC_RAS_DES_ID);

Best Regards,
Shuai
  
Ilkka Koskinen Nov. 16, 2023, 7:02 p.m. UTC | #6
On Thu, 16 Nov 2023, Shuai Xue wrote:
> On 2023/11/16 11:50, Ilkka Koskinen wrote:
>>> +static int dwc_pcie_pmu_probe(struct platform_device *plat_dev)
>>> +{
>>> +    struct pci_dev *pdev = plat_dev->dev.platform_data;
>>> +    struct dwc_pcie_pmu *pcie_pmu;
>>> +    char *name;
>>> +    u32 bdf, val;
>>> +    u16 vsec;
>>> +    int ret;
>>> +
>>> +    vsec = pci_find_vsec_capability(pdev, PCI_VENDOR_ID_ALIBABA,
>>> +                    DWC_PCIE_VSEC_RAS_DES_ID);
>>
>> You nicely changed to use vendor list in this version but here the driver still tries to find Alibaba specific capability.
>
> Sorry, I missed here.
>
>> I guess, you could search again using the vendor list. The other option would be to make dwc_pcie_match_des_cap() to return the vendor id, pass it to dwc_pcie_register_dev(), which would add it to device's platform data with
>> the pointer to the pci device.
>
> The dwc_pcie_pmu_probe() is called by device which has DWC_PCIE_VSEC_RAS_DES_ID cap.
> So I guess I can use pdev->vendor directly here, e.g?
>
> 	pci_find_vsec_capability(pdev, pdev->vendor, DWC_PCIE_VSEC_RAS_DES_ID);


Oh, right. That seems correct.

Cheers, Ilkka

>
> Best Regards,
> Shuai
>
  

Patch

diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index 273d67ecf6d2..ec6e0d9194a1 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -217,6 +217,13 @@  config MARVELL_CN10K_DDR_PMU
 	  Enable perf support for Marvell DDR Performance monitoring
 	  event on CN10K platform.
 
+config DWC_PCIE_PMU
+	tristate "Synopsys DesignWare PCIe PMU"
+	depends on PCI
+	help
+	  Enable perf support for Synopsys DesignWare PCIe PMU Performance
+	  monitoring event on platform including the Alibaba Yitian 710.
+
 source "drivers/perf/arm_cspmu/Kconfig"
 
 source "drivers/perf/amlogic/Kconfig"
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index 16b3ec4db916..a06338e3401c 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -23,6 +23,7 @@  obj-$(CONFIG_MARVELL_CN10K_TAD_PMU) += marvell_cn10k_tad_pmu.o
 obj-$(CONFIG_MARVELL_CN10K_DDR_PMU) += marvell_cn10k_ddr_pmu.o
 obj-$(CONFIG_APPLE_M1_CPU_PMU) += apple_m1_cpu_pmu.o
 obj-$(CONFIG_ALIBABA_UNCORE_DRW_PMU) += alibaba_uncore_drw_pmu.o
+obj-$(CONFIG_DWC_PCIE_PMU) += dwc_pcie_pmu.o
 obj-$(CONFIG_ARM_CORESIGHT_PMU_ARCH_SYSTEM_PMU) += arm_cspmu/
 obj-$(CONFIG_MESON_DDR_PMU) += amlogic/
 obj-$(CONFIG_CXL_PMU) += cxl_pmu.o
diff --git a/drivers/perf/dwc_pcie_pmu.c b/drivers/perf/dwc_pcie_pmu.c
new file mode 100644
index 000000000000..9485c41de322
--- /dev/null
+++ b/drivers/perf/dwc_pcie_pmu.c
@@ -0,0 +1,798 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Synopsys DesignWare PCIe PMU driver
+ *
+ * Copyright (C) 2021-2023 Alibaba Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/cpuhotplug.h>
+#include <linux/cpumask.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/perf_event.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/smp.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+
+#define DWC_PCIE_VSEC_RAS_DES_ID		0x02
+#define DWC_PCIE_EVENT_CNT_CTL			0x8
+
+/*
+ * Event Counter Data Select includes two parts:
+ * - 27-24: Group number(4-bit: 0..0x7)
+ * - 23-16: Event number(8-bit: 0..0x13) within the Group
+ *
+ * Put them together as in TRM.
+ */
+#define DWC_PCIE_CNT_EVENT_SEL			GENMASK(27, 16)
+#define DWC_PCIE_CNT_LANE_SEL			GENMASK(11, 8)
+#define DWC_PCIE_CNT_STATUS			BIT(7)
+#define DWC_PCIE_CNT_ENABLE			GENMASK(4, 2)
+#define DWC_PCIE_PER_EVENT_OFF			0x1
+#define DWC_PCIE_PER_EVENT_ON			0x3
+#define DWC_PCIE_EVENT_CLEAR			GENMASK(1, 0)
+#define DWC_PCIE_EVENT_PER_CLEAR		0x1
+
+#define DWC_PCIE_EVENT_CNT_DATA			0xC
+
+#define DWC_PCIE_TIME_BASED_ANAL_CTL		0x10
+#define DWC_PCIE_TIME_BASED_REPORT_SEL		GENMASK(31, 24)
+#define DWC_PCIE_TIME_BASED_DURATION_SEL	GENMASK(15, 8)
+#define DWC_PCIE_DURATION_MANUAL_CTL		0x0
+#define DWC_PCIE_DURATION_1MS			0x1
+#define DWC_PCIE_DURATION_10MS			0x2
+#define DWC_PCIE_DURATION_100MS			0x3
+#define DWC_PCIE_DURATION_1S			0x4
+#define DWC_PCIE_DURATION_2S			0x5
+#define DWC_PCIE_DURATION_4S			0x6
+#define DWC_PCIE_DURATION_4US			0xFF
+#define DWC_PCIE_TIME_BASED_TIMER_START		BIT(0)
+#define DWC_PCIE_TIME_BASED_CNT_ENABLE		0x1
+
+#define DWC_PCIE_TIME_BASED_ANAL_DATA_REG_LOW	0x14
+#define DWC_PCIE_TIME_BASED_ANAL_DATA_REG_HIGH	0x18
+
+/* Event attributes */
+#define DWC_PCIE_CONFIG_EVENTID			GENMASK(15, 0)
+#define DWC_PCIE_CONFIG_TYPE			GENMASK(19, 16)
+#define DWC_PCIE_CONFIG_LANE			GENMASK(27, 20)
+
+#define DWC_PCIE_EVENT_ID(event)	FIELD_GET(DWC_PCIE_CONFIG_EVENTID, (event)->attr.config)
+#define DWC_PCIE_EVENT_TYPE(event)	FIELD_GET(DWC_PCIE_CONFIG_TYPE, (event)->attr.config)
+#define DWC_PCIE_EVENT_LANE(event)	FIELD_GET(DWC_PCIE_CONFIG_LANE, (event)->attr.config)
+
+enum dwc_pcie_event_type {
+	DWC_PCIE_TIME_BASE_EVENT,
+	DWC_PCIE_LANE_EVENT,
+	DWC_PCIE_EVENT_TYPE_MAX,
+};
+
+#define DWC_PCIE_LANE_EVENT_MAX_PERIOD		GENMASK_ULL(31, 0)
+#define DWC_PCIE_MAX_PERIOD			GENMASK_ULL(63, 0)
+
+struct dwc_pcie_pmu {
+	struct pmu		pmu;
+	struct pci_dev		*pdev;		/* Root Port device */
+	u16			ras_des_offset;
+	u32			nr_lanes;
+
+	struct list_head	pmu_node;
+	struct hlist_node	cpuhp_node;
+	struct perf_event	*event[DWC_PCIE_EVENT_TYPE_MAX];
+	int			on_cpu;
+};
+
+#define to_dwc_pcie_pmu(p) (container_of(p, struct dwc_pcie_pmu, pmu))
+
+static int dwc_pcie_pmu_hp_state;
+static struct list_head dwc_pcie_dev_info_head =
+				LIST_HEAD_INIT(dwc_pcie_dev_info_head);
+static bool notify;
+
+struct dwc_pcie_dev_info {
+	struct platform_device *plat_dev;
+	struct pci_dev *pdev;
+	struct list_head dev_node;
+};
+
+struct dwc_pcie_vendor_id {
+	int vendor_id;
+};
+
+static const struct dwc_pcie_vendor_id dwc_pcie_vendor_ids[] = {
+	{.vendor_id = PCI_VENDOR_ID_ALIBABA },
+	{} /* terminator */
+};
+
+static ssize_t cpumask_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(dev_get_drvdata(dev));
+
+	return cpumap_print_to_pagebuf(true, buf, cpumask_of(pcie_pmu->on_cpu));
+}
+static DEVICE_ATTR_RO(cpumask);
+
+static struct attribute *dwc_pcie_pmu_cpumask_attrs[] = {
+	&dev_attr_cpumask.attr,
+	NULL
+};
+
+static struct attribute_group dwc_pcie_cpumask_attr_group = {
+	.attrs = dwc_pcie_pmu_cpumask_attrs,
+};
+
+struct dwc_pcie_format_attr {
+	struct device_attribute attr;
+	u64 field;
+	int config;
+};
+
+PMU_FORMAT_ATTR(eventid, "config:0-15");
+PMU_FORMAT_ATTR(type, "config:16-19");
+PMU_FORMAT_ATTR(lane, "config:20-27");
+
+static struct attribute *dwc_pcie_format_attrs[] = {
+	&format_attr_type.attr,
+	&format_attr_eventid.attr,
+	&format_attr_lane.attr,
+	NULL,
+};
+
+static struct attribute_group dwc_pcie_format_attrs_group = {
+	.name = "format",
+	.attrs = dwc_pcie_format_attrs,
+};
+
+struct dwc_pcie_event_attr {
+	struct device_attribute attr;
+	enum dwc_pcie_event_type type;
+	u16 eventid;
+	u8 lane;
+};
+
+static ssize_t dwc_pcie_event_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct dwc_pcie_event_attr *eattr;
+
+	eattr = container_of(attr, typeof(*eattr), attr);
+
+	if (eattr->type == DWC_PCIE_LANE_EVENT)
+		return sysfs_emit(buf, "eventid=0x%x,type=0x%x,lane=?\n",
+				  eattr->eventid, eattr->type);
+	else if (eattr->type == DWC_PCIE_TIME_BASE_EVENT)
+		return sysfs_emit(buf, "eventid=0x%x,type=0x%x\n",
+				  eattr->eventid, eattr->type);
+
+	return 0;
+}
+
+#define DWC_PCIE_EVENT_ATTR(_name, _type, _eventid, _lane)		\
+	(&((struct dwc_pcie_event_attr[]) {{				\
+		.attr = __ATTR(_name, 0444, dwc_pcie_event_show, NULL),	\
+		.type = _type,						\
+		.eventid = _eventid,					\
+		.lane = _lane,						\
+	}})[0].attr.attr)
+
+#define DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(_name, _eventid)		\
+	DWC_PCIE_EVENT_ATTR(_name, DWC_PCIE_TIME_BASE_EVENT, _eventid, 0)
+#define DWC_PCIE_PMU_LANE_EVENT_ATTR(_name, _eventid)			\
+	DWC_PCIE_EVENT_ATTR(_name, DWC_PCIE_LANE_EVENT, _eventid, 0)
+
+static struct attribute *dwc_pcie_pmu_time_event_attrs[] = {
+	/* Group #0 */
+	DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(one_cycle, 0x00),
+	DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(TX_L0S, 0x01),
+	DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(RX_L0S, 0x02),
+	DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(L0, 0x03),
+	DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(L1, 0x04),
+	DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(L1_1, 0x05),
+	DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(L1_2, 0x06),
+	DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(CFG_RCVRY, 0x07),
+	DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(TX_RX_L0S, 0x08),
+	DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(L1_AUX, 0x09),
+
+	/* Group #1 */
+	DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(Tx_PCIe_TLP_Data_Payload, 0x20),
+	DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(Rx_PCIe_TLP_Data_Payload, 0x21),
+	DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(Tx_CCIX_TLP_Data_Payload, 0x22),
+	DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(Rx_CCIX_TLP_Data_Payload, 0x23),
+
+	/*
+	 * Leave it to the user to specify the lane ID to avoid generating
+	 * a list of hundreds of events.
+	 */
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_ack_dllp, 0x600),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_update_fc_dllp, 0x601),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_ack_dllp, 0x602),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_update_fc_dllp, 0x603),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_nulified_tlp, 0x604),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_nulified_tlp, 0x605),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_duplicate_tl, 0x606),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_memory_write, 0x700),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_memory_read, 0x701),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_configuration_write, 0x702),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_configuration_read, 0x703),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_io_write, 0x704),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_io_read, 0x705),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_completion_without_data, 0x706),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_completion_with_data, 0x707),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_message_tlp, 0x708),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_atomic, 0x709),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_tlp_with_prefix, 0x70A),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_memory_write, 0x70B),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_memory_read, 0x70C),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_io_write, 0x70F),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_io_read, 0x710),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_completion_without_data, 0x711),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_completion_with_data, 0x712),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_message_tlp, 0x713),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_atomic, 0x714),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_tlp_with_prefix, 0x715),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_ccix_tlp, 0x716),
+	DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_ccix_tlp, 0x717),
+	NULL
+};
+
+static const struct attribute_group dwc_pcie_event_attrs_group = {
+	.name = "events",
+	.attrs = dwc_pcie_pmu_time_event_attrs,
+};
+
+static const struct attribute_group *dwc_pcie_attr_groups[] = {
+	&dwc_pcie_event_attrs_group,
+	&dwc_pcie_format_attrs_group,
+	&dwc_pcie_cpumask_attr_group,
+	NULL
+};
+
+static void dwc_pcie_pmu_lane_event_enable(struct dwc_pcie_pmu *pcie_pmu,
+					   bool enable)
+{
+	struct pci_dev *pdev = pcie_pmu->pdev;
+	u16 ras_des_offset = pcie_pmu->ras_des_offset;
+
+	if (enable)
+		pci_clear_and_set_dword(pdev,
+			ras_des_offset + DWC_PCIE_EVENT_CNT_CTL,
+			DWC_PCIE_CNT_ENABLE, DWC_PCIE_PER_EVENT_ON);
+	else
+		pci_clear_and_set_dword(pdev,
+			ras_des_offset + DWC_PCIE_EVENT_CNT_CTL,
+			DWC_PCIE_CNT_ENABLE, DWC_PCIE_PER_EVENT_OFF);
+}
+
+static void dwc_pcie_pmu_time_based_event_enable(struct dwc_pcie_pmu *pcie_pmu,
+					  bool enable)
+{
+	struct pci_dev *pdev = pcie_pmu->pdev;
+	u16 ras_des_offset = pcie_pmu->ras_des_offset;
+
+	if (enable)
+		pci_clear_and_set_dword(pdev,
+			ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL,
+			DWC_PCIE_TIME_BASED_TIMER_START, 0x1);
+	else
+		pci_clear_and_set_dword(pdev,
+			ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL,
+			DWC_PCIE_TIME_BASED_TIMER_START, 0x0);
+}
+
+static u64 dwc_pcie_pmu_read_lane_event_counter(struct perf_event *event)
+{
+	struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(event->pmu);
+	struct pci_dev *pdev = pcie_pmu->pdev;
+	u16 ras_des_offset = pcie_pmu->ras_des_offset;
+	u32 val;
+
+	pci_read_config_dword(pdev, ras_des_offset + DWC_PCIE_EVENT_CNT_DATA, &val);
+
+	return val;
+}
+
+static u64 dwc_pcie_pmu_read_time_based_counter(struct perf_event *event)
+{
+	struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(event->pmu);
+	struct pci_dev *pdev = pcie_pmu->pdev;
+	int event_id = DWC_PCIE_EVENT_ID(event);
+	u16 ras_des_offset = pcie_pmu->ras_des_offset;
+	u32 lo, hi, ss;
+	u64 val;
+
+	/*
+	 * The 64-bit value of the data counter is spread across two
+	 * registers that are not synchronized. In order to read them
+	 * atomically, ensure that the high 32 bits match before and after
+	 * reading the low 32 bits.
+	 */
+	pci_read_config_dword(pdev,
+		ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_DATA_REG_HIGH, &hi);
+	do {
+		/* snapshot the high 32 bits */
+		ss = hi;
+
+		pci_read_config_dword(
+			pdev, ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_DATA_REG_LOW,
+			&lo);
+		pci_read_config_dword(
+			pdev, ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_DATA_REG_HIGH,
+			&hi);
+	} while (hi != ss);
+
+	val = ((u64)hi << 32) | lo;
+	/*
+	 * The Group#1 event measures the amount of data processed in 16-byte
+	 * units. Simplify the end-user interface by multiplying the counter
+	 * at the point of read.
+	 */
+	if (event_id >= 0x20 && event_id <= 0x23)
+		val *= 16;
+
+	return val;
+}
+
+static void dwc_pcie_pmu_event_update(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	enum dwc_pcie_event_type type = DWC_PCIE_EVENT_TYPE(event);
+	u64 delta, prev, now;
+
+	do {
+		prev = local64_read(&hwc->prev_count);
+
+		if (type == DWC_PCIE_LANE_EVENT)
+			now = dwc_pcie_pmu_read_lane_event_counter(event);
+		else if (type == DWC_PCIE_TIME_BASE_EVENT)
+			now = dwc_pcie_pmu_read_time_based_counter(event);
+
+	} while (local64_cmpxchg(&hwc->prev_count, prev, now) != prev);
+
+	delta = (now - prev) & DWC_PCIE_MAX_PERIOD;
+	/* 32-bit counter for Lane Event Counting */
+	if (type == DWC_PCIE_LANE_EVENT)
+		delta &= DWC_PCIE_LANE_EVENT_MAX_PERIOD;
+
+	local64_add(delta, &event->count);
+}
+
+static int dwc_pcie_pmu_event_init(struct perf_event *event)
+{
+	struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(event->pmu);
+	enum dwc_pcie_event_type type = DWC_PCIE_EVENT_TYPE(event);
+	struct perf_event *sibling;
+	u32 lane;
+
+	if (event->attr.type != event->pmu->type)
+		return -ENOENT;
+
+	/* We don't support sampling */
+	if (is_sampling_event(event))
+		return -EINVAL;
+
+	/* We cannot support task bound events */
+	if (event->cpu < 0 || event->attach_state & PERF_ATTACH_TASK)
+		return -EINVAL;
+
+	if (event->group_leader != event &&
+	    !is_software_event(event->group_leader))
+		return -EINVAL;
+
+	for_each_sibling_event(sibling, event->group_leader) {
+		if (sibling->pmu != event->pmu && !is_software_event(sibling))
+			return -EINVAL;
+	}
+
+	if (type < 0 || type >= DWC_PCIE_EVENT_TYPE_MAX)
+		return -EINVAL;
+
+	if (type == DWC_PCIE_LANE_EVENT) {
+		lane = DWC_PCIE_EVENT_LANE(event);
+		if (lane < 0 || lane >= pcie_pmu->nr_lanes)
+			return -EINVAL;
+	}
+
+	event->cpu = pcie_pmu->on_cpu;
+
+	return 0;
+}
+
+static void dwc_pcie_pmu_event_start(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(event->pmu);
+	enum dwc_pcie_event_type type = DWC_PCIE_EVENT_TYPE(event);
+
+	hwc->state = 0;
+	local64_set(&hwc->prev_count, 0);
+
+	if (type == DWC_PCIE_LANE_EVENT)
+		dwc_pcie_pmu_lane_event_enable(pcie_pmu, true);
+	else if (type == DWC_PCIE_TIME_BASE_EVENT)
+		dwc_pcie_pmu_time_based_event_enable(pcie_pmu, true);
+}
+
+static void dwc_pcie_pmu_event_stop(struct perf_event *event, int flags)
+{
+	struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(event->pmu);
+	enum dwc_pcie_event_type type = DWC_PCIE_EVENT_TYPE(event);
+	struct hw_perf_event *hwc = &event->hw;
+
+	if (event->hw.state & PERF_HES_STOPPED)
+		return;
+
+	if (type == DWC_PCIE_LANE_EVENT)
+		dwc_pcie_pmu_lane_event_enable(pcie_pmu, false);
+	else if (type == DWC_PCIE_TIME_BASE_EVENT)
+		dwc_pcie_pmu_time_based_event_enable(pcie_pmu, false);
+
+	dwc_pcie_pmu_event_update(event);
+	hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
+}
+
+static int dwc_pcie_pmu_event_add(struct perf_event *event, int flags)
+{
+	struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(event->pmu);
+	struct pci_dev *pdev = pcie_pmu->pdev;
+	struct hw_perf_event *hwc = &event->hw;
+	enum dwc_pcie_event_type type = DWC_PCIE_EVENT_TYPE(event);
+	int event_id = DWC_PCIE_EVENT_ID(event);
+	int lane = DWC_PCIE_EVENT_LANE(event);
+	u16 ras_des_offset = pcie_pmu->ras_des_offset;
+	u32 ctrl;
+
+	/* one counter for each type and it is in use */
+	if (pcie_pmu->event[type])
+		return -ENOSPC;
+
+	pcie_pmu->event[type] = event;
+	hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
+
+	if (type == DWC_PCIE_LANE_EVENT) {
+		/* EVENT_COUNTER_DATA_REG needs clear manually */
+		ctrl = FIELD_PREP(DWC_PCIE_CNT_EVENT_SEL, event_id) |
+			FIELD_PREP(DWC_PCIE_CNT_LANE_SEL, lane) |
+			FIELD_PREP(DWC_PCIE_CNT_ENABLE, DWC_PCIE_PER_EVENT_OFF) |
+			FIELD_PREP(DWC_PCIE_EVENT_CLEAR, DWC_PCIE_EVENT_PER_CLEAR);
+		pci_write_config_dword(pdev, ras_des_offset + DWC_PCIE_EVENT_CNT_CTL,
+				       ctrl);
+	} else if (type == DWC_PCIE_TIME_BASE_EVENT) {
+		/*
+		 * TIME_BASED_ANAL_DATA_REG is a 64 bit register, we can safely
+		 * use it with any manually controlled duration. And it is
+		 * cleared when next measurement starts.
+		 */
+		ctrl = FIELD_PREP(DWC_PCIE_TIME_BASED_REPORT_SEL, event_id) |
+			FIELD_PREP(DWC_PCIE_TIME_BASED_DURATION_SEL,
+				   DWC_PCIE_DURATION_MANUAL_CTL) |
+			DWC_PCIE_TIME_BASED_CNT_ENABLE;
+		pci_write_config_dword(
+			pdev, ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL, ctrl);
+	}
+
+	if (flags & PERF_EF_START)
+		dwc_pcie_pmu_event_start(event, PERF_EF_RELOAD);
+
+	perf_event_update_userpage(event);
+
+	return 0;
+}
+
+static void dwc_pcie_pmu_event_del(struct perf_event *event, int flags)
+{
+	struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(event->pmu);
+	enum dwc_pcie_event_type type = DWC_PCIE_EVENT_TYPE(event);
+
+	dwc_pcie_pmu_event_stop(event, flags | PERF_EF_UPDATE);
+	perf_event_update_userpage(event);
+	pcie_pmu->event[type] = NULL;
+}
+
+static void dwc_pcie_pmu_remove_cpuhp_instance(void *hotplug_node)
+{
+	cpuhp_state_remove_instance_nocalls(dwc_pcie_pmu_hp_state, hotplug_node);
+}
+
+/*
+ * Find the binded DES capability device info of a PCI device.
+ * @pdev: The PCI device.
+ */
+static struct dwc_pcie_dev_info *dwc_pcie_find_dev_info(struct pci_dev *pdev)
+{
+	struct dwc_pcie_dev_info *dev_info;
+
+	list_for_each_entry(dev_info, &dwc_pcie_dev_info_head, dev_node)
+		if (dev_info->pdev == pdev)
+			return dev_info;
+
+	return NULL;
+}
+
+static void dwc_pcie_unregister_pmu(void *data)
+{
+	struct dwc_pcie_pmu *pcie_pmu = data;
+
+	perf_pmu_unregister(&pcie_pmu->pmu);
+}
+
+static bool dwc_pcie_match_des_cap(struct pci_dev *pdev)
+{
+	const struct dwc_pcie_vendor_id *vid;
+	u16 vsec;
+	u32 val;
+
+	if (!pci_is_pcie(pdev) || !(pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT))
+		return false;
+
+	for (vid = dwc_pcie_vendor_ids; vid->vendor_id; vid++) {
+		vsec = pci_find_vsec_capability(pdev, vid->vendor_id,
+						DWC_PCIE_VSEC_RAS_DES_ID);
+		if (vsec)
+			break;
+	}
+	if (!vsec)
+		return false;
+
+	pci_read_config_dword(pdev, vsec + PCI_VNDR_HEADER, &val);
+	if (PCI_VNDR_HEADER_REV(val) != 0x04)
+		return false;
+
+	pci_dbg(pdev,
+		"Detected PCIe Vendor-Specific Extended Capability RAS DES\n");
+	return true;
+}
+
+static void dwc_pcie_unregister_dev(struct dwc_pcie_dev_info *dev_info)
+{
+	platform_device_unregister(dev_info->plat_dev);
+	list_del(&dev_info->dev_node);
+	kfree(dev_info);
+}
+
+static int dwc_pcie_register_dev(struct pci_dev *pdev)
+{
+	struct platform_device *plat_dev;
+	struct dwc_pcie_dev_info *dev_info;
+	int ret;
+	u32 bdf;
+
+	bdf = PCI_DEVID(pdev->bus->number, pdev->devfn);
+	plat_dev = platform_device_register_data(NULL, "dwc_pcie_pmu", bdf,
+						 pdev, sizeof(*pdev));
+	ret = PTR_ERR_OR_ZERO(plat_dev);
+	if (ret)
+		return ret;
+
+	dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL);
+	if (!dev_info)
+		return -ENOMEM;
+
+	/* Cache platform device to handle pci device hotplug */
+	dev_info->plat_dev = plat_dev;
+	dev_info->pdev = pdev;
+	list_add(&dev_info->dev_node, &dwc_pcie_dev_info_head);
+
+	return 0;
+}
+
+static int dwc_pcie_pmu_notifier(struct notifier_block *nb,
+				     unsigned long action, void *data)
+{
+	struct device *dev = data;
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct dwc_pcie_dev_info *dev_info;
+
+	switch (action) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		if (!dwc_pcie_match_des_cap(pdev))
+			return NOTIFY_DONE;
+		if (dwc_pcie_register_dev(pdev))
+			return NOTIFY_BAD;
+		break;
+	case BUS_NOTIFY_DEL_DEVICE:
+		dev_info = dwc_pcie_find_dev_info(pdev);
+		if (!dev_info)
+			return NOTIFY_DONE;
+		dwc_pcie_unregister_dev(dev_info);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block dwc_pcie_pmu_nb = {
+	.notifier_call = dwc_pcie_pmu_notifier,
+};
+
+static int dwc_pcie_pmu_probe(struct platform_device *plat_dev)
+{
+	struct pci_dev *pdev = plat_dev->dev.platform_data;
+	struct dwc_pcie_pmu *pcie_pmu;
+	char *name;
+	u32 bdf, val;
+	u16 vsec;
+	int ret;
+
+	vsec = pci_find_vsec_capability(pdev, PCI_VENDOR_ID_ALIBABA,
+					DWC_PCIE_VSEC_RAS_DES_ID);
+	pci_read_config_dword(pdev, vsec + PCI_VNDR_HEADER, &val);
+	bdf = PCI_DEVID(pdev->bus->number, pdev->devfn);
+	name = devm_kasprintf(&plat_dev->dev, GFP_KERNEL, "dwc_rootport_%x", bdf);
+	if (!name)
+		return -ENOMEM;
+
+	pcie_pmu = devm_kzalloc(&plat_dev->dev, sizeof(*pcie_pmu), GFP_KERNEL);
+	if (!pcie_pmu)
+		return -ENOMEM;
+
+	pcie_pmu->pdev = pdev;
+	pcie_pmu->ras_des_offset = vsec;
+	pcie_pmu->nr_lanes = pcie_get_width_cap(pdev);
+	pcie_pmu->on_cpu = -1;
+	pcie_pmu->pmu = (struct pmu){
+		.name		= name,
+		.parent		= &pdev->dev,
+		.module		= THIS_MODULE,
+		.attr_groups	= dwc_pcie_attr_groups,
+		.capabilities	= PERF_PMU_CAP_NO_EXCLUDE,
+		.task_ctx_nr	= perf_invalid_context,
+		.event_init	= dwc_pcie_pmu_event_init,
+		.add		= dwc_pcie_pmu_event_add,
+		.del		= dwc_pcie_pmu_event_del,
+		.start		= dwc_pcie_pmu_event_start,
+		.stop		= dwc_pcie_pmu_event_stop,
+		.read		= dwc_pcie_pmu_event_update,
+	};
+
+	/* Add this instance to the list used by the offline callback */
+	ret = cpuhp_state_add_instance(dwc_pcie_pmu_hp_state,
+				       &pcie_pmu->cpuhp_node);
+	if (ret) {
+		pci_err(pdev, "Error %d registering hotplug @%x\n", ret, bdf);
+		return ret;
+	}
+
+	/* Unwind when platform driver removes */
+	ret = devm_add_action_or_reset(&plat_dev->dev,
+				       dwc_pcie_pmu_remove_cpuhp_instance,
+				       &pcie_pmu->cpuhp_node);
+	if (ret)
+		return ret;
+
+	ret = perf_pmu_register(&pcie_pmu->pmu, name, -1);
+	if (ret) {
+		pci_err(pdev, "Error %d registering PMU @%x\n", ret, bdf);
+		return ret;
+	}
+	ret = devm_add_action_or_reset(&plat_dev->dev, dwc_pcie_unregister_pmu,
+				       pcie_pmu);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int dwc_pcie_pmu_online_cpu(unsigned int cpu, struct hlist_node *cpuhp_node)
+{
+	struct dwc_pcie_pmu *pcie_pmu;
+
+	pcie_pmu = hlist_entry_safe(cpuhp_node, struct dwc_pcie_pmu, cpuhp_node);
+	if (pcie_pmu->on_cpu == -1)
+		pcie_pmu->on_cpu = cpumask_local_spread(
+			0, dev_to_node(&pcie_pmu->pdev->dev));
+
+	return 0;
+}
+
+static int dwc_pcie_pmu_offline_cpu(unsigned int cpu, struct hlist_node *cpuhp_node)
+{
+	struct dwc_pcie_pmu *pcie_pmu;
+	struct pci_dev *pdev;
+	int node;
+	cpumask_t mask;
+	unsigned int target;
+
+	pcie_pmu = hlist_entry_safe(cpuhp_node, struct dwc_pcie_pmu, cpuhp_node);
+	/* Nothing to do if this CPU doesn't own the PMU */
+	if (cpu != pcie_pmu->on_cpu)
+		return 0;
+
+	pcie_pmu->on_cpu = -1;
+	pdev = pcie_pmu->pdev;
+	node = dev_to_node(&pdev->dev);
+	if (cpumask_and(&mask, cpumask_of_node(node), cpu_online_mask) &&
+	    cpumask_andnot(&mask, &mask, cpumask_of(cpu)))
+		target = cpumask_any(&mask);
+	else
+		target = cpumask_any_but(cpu_online_mask, cpu);
+
+	if (target >= nr_cpu_ids) {
+		pci_err(pdev, "There is no CPU to set\n");
+		return 0;
+	}
+
+	/* This PMU does NOT support interrupt, just migrate context. */
+	perf_pmu_migrate_context(&pcie_pmu->pmu, cpu, target);
+	pcie_pmu->on_cpu = target;
+
+	return 0;
+}
+
+static struct platform_driver dwc_pcie_pmu_driver = {
+	.probe = dwc_pcie_pmu_probe,
+	.driver = {.name = "dwc_pcie_pmu",},
+};
+
+static int __init dwc_pcie_pmu_init(void)
+{
+	struct pci_dev *pdev = NULL;
+	bool found = false;
+	int ret;
+
+	for_each_pci_dev(pdev) {
+		if (!dwc_pcie_match_des_cap(pdev))
+			continue;
+
+		ret = dwc_pcie_register_dev(pdev);
+		if (ret) {
+			pci_dev_put(pdev);
+			return ret;
+		}
+
+		found = true;
+	}
+	if (!found)
+		return -ENODEV;
+
+	ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN,
+				      "perf/dwc_pcie_pmu:online",
+				      dwc_pcie_pmu_online_cpu,
+				      dwc_pcie_pmu_offline_cpu);
+	if (ret < 0)
+		return ret;
+
+	dwc_pcie_pmu_hp_state = ret;
+
+	ret = platform_driver_register(&dwc_pcie_pmu_driver);
+	if (ret)
+		goto platform_driver_register_err;
+
+	ret = bus_register_notifier(&pci_bus_type, &dwc_pcie_pmu_nb);
+	if (ret)
+		goto platform_driver_register_err;
+	notify = true;
+
+	return 0;
+
+platform_driver_register_err:
+	cpuhp_remove_multi_state(dwc_pcie_pmu_hp_state);
+
+	return ret;
+}
+
+static void __exit dwc_pcie_pmu_exit(void)
+{
+	struct dwc_pcie_dev_info *dev_info, *tmp;
+
+	if (notify)
+		bus_unregister_notifier(&pci_bus_type, &dwc_pcie_pmu_nb);
+	list_for_each_entry_safe(dev_info, tmp, &dwc_pcie_dev_info_head, dev_node)
+		dwc_pcie_unregister_dev(dev_info);
+	platform_driver_unregister(&dwc_pcie_pmu_driver);
+	cpuhp_remove_multi_state(dwc_pcie_pmu_hp_state);
+}
+
+module_init(dwc_pcie_pmu_init);
+module_exit(dwc_pcie_pmu_exit);
+
+MODULE_DESCRIPTION("PMU driver for DesignWare Cores PCI Express Controller");
+MODULE_AUTHOR("Shuai Xue <xueshuai@linux.alibaba.com>");
+MODULE_LICENSE("GPL v2");