[5/6] reset: rockchip: secure reset must be used by SCMI

Message ID 20231107155532.3747113-6-clabbe@baylibre.com
State New
Headers
Series crypto: rockchip: add support for rk3588/rk3568 |

Commit Message

Corentin LABBE Nov. 7, 2023, 3:55 p.m. UTC
  While working on the rk3588 crypto driver, I loose lot of time
understanding why resetting the IP failed.
This is due to RK3588_SECURECRU_RESET_OFFSET being in the secure world,
so impossible to operate on it from the kernel.
All resets in this block must be handled via SCMI call.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 drivers/clk/rockchip/rst-rk3588.c             | 42 ------------
 .../dt-bindings/reset/rockchip,rk3588-cru.h   | 68 +++++++++----------
 2 files changed, 34 insertions(+), 76 deletions(-)
  

Comments

Krzysztof Kozlowski Nov. 7, 2023, 4:21 p.m. UTC | #1
On 07/11/2023 16:55, Corentin Labbe wrote:
> While working on the rk3588 crypto driver, I loose lot of time
> understanding why resetting the IP failed.
> This is due to RK3588_SECURECRU_RESET_OFFSET being in the secure world,
> so impossible to operate on it from the kernel.
> All resets in this block must be handled via SCMI call.
> 
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
>  drivers/clk/rockchip/rst-rk3588.c             | 42 ------------
>  .../dt-bindings/reset/rockchip,rk3588-cru.h   | 68 +++++++++----------

Please run scripts/checkpatch.pl and fix reported warnings. Some
warnings can be ignored, but the code here looks like it needs a fix.
Feel free to get in touch if the warning is not clear.

>  2 files changed, 34 insertions(+), 76 deletions(-)
> 
> diff --git a/drivers/clk/rockchip/rst-rk3588.c b/drivers/clk/rockchip/rst-rk3588.c
> index e855bb8d5413..6556d9d3c7ab 100644
> --- a/drivers/clk/rockchip/rst-rk3588.c
> +++ b/drivers/clk/rockchip/rst-rk3588.c
> @@ -16,9 +16,6 @@
>  /* 0xFD7C8000 + 0x0A00 */
>  #define RK3588_PHPTOPCRU_RESET_OFFSET(id, reg, bit) [id] = (0x8000*4 + reg * 16 + bit)
>  
> -/* 0xFD7D0000 + 0x0A00 */
> -#define RK3588_SECURECRU_RESET_OFFSET(id, reg, bit) [id] = (0x10000*4 + reg * 16 + bit)
> -
>  /* 0xFD7F0000 + 0x0A00 */
>  #define RK3588_PMU1CRU_RESET_OFFSET(id, reg, bit) [id] = (0x30000*4 + reg * 16 + bit)
>  
> @@ -806,45 +803,6 @@ static const int rk3588_register_offset[] = {
>  	RK3588_PMU1CRU_RESET_OFFSET(SRST_P_PMU0IOC, 5, 4),
>  	RK3588_PMU1CRU_RESET_OFFSET(SRST_P_GPIO0, 5, 5),
>  	RK3588_PMU1CRU_RESET_OFFSET(SRST_GPIO0, 5, 6),
> -
> -	/* SECURECRU_SOFTRST_CON00 */
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_SECURE_NS_BIU, 0, 10),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SECURE_NS_BIU, 0, 11),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_SECURE_S_BIU, 0, 12),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SECURE_S_BIU, 0, 13),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_SECURE_S_BIU, 0, 14),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_CORE, 0, 15),
> -
> -	/* SECURECRU_SOFTRST_CON01 */
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_PKA, 1, 0),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_RNG, 1, 1),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_CRYPTO, 1, 2),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_CRYPTO, 1, 3),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_KEYLADDER_CORE, 1, 9),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_KEYLADDER_RNG, 1, 10),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_KEYLADDER, 1, 11),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_KEYLADDER, 1, 12),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_OTPC_S, 1, 13),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_OTPC_S, 1, 14),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_WDT_S, 1, 15),
> -
> -	/* SECURECRU_SOFTRST_CON02 */
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_T_WDT_S, 2, 0),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_BOOTROM, 2, 1),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_DCF, 2, 2),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_DCF, 2, 3),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_BOOTROM_NS, 2, 5),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_KEYLADDER, 2, 14),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_TRNG_S, 2, 15),
> -
> -	/* SECURECRU_SOFTRST_CON03 */
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_TRNG_NS, 3, 0),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_D_SDMMC_BUFFER, 3, 1),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SDMMC, 3, 2),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SDMMC_BUFFER, 3, 3),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_SDMMC, 3, 4),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_TRNG_CHK, 3, 5),
> -	RK3588_SECURECRU_RESET_OFFSET(SRST_TRNG_S, 3, 6),
>  };
>  
>  void rk3588_rst_init(struct device_node *np, void __iomem *reg_base)
> diff --git a/include/dt-bindings/reset/rockchip,rk3588-cru.h b/include/dt-bindings/reset/rockchip,rk3588-cru.h
> index d4264db2a07f..c0d08ae78cd5 100644
> --- a/include/dt-bindings/reset/rockchip,rk3588-cru.h
> +++ b/include/dt-bindings/reset/rockchip,rk3588-cru.h
> @@ -716,39 +716,39 @@
>  #define SRST_P_GPIO0			627
>  #define SRST_GPIO0			628
>  
> -#define SRST_A_SECURE_NS_BIU		629
> -#define SRST_H_SECURE_NS_BIU		630
> -#define SRST_A_SECURE_S_BIU		631
> -#define SRST_H_SECURE_S_BIU		632
> -#define SRST_P_SECURE_S_BIU		633
> -#define SRST_CRYPTO_CORE		634
> -
> -#define SRST_CRYPTO_PKA			635
> -#define SRST_CRYPTO_RNG			636
> -#define SRST_A_CRYPTO			637
> -#define SRST_H_CRYPTO			638
> -#define SRST_KEYLADDER_CORE		639
> -#define SRST_KEYLADDER_RNG		640
> -#define SRST_A_KEYLADDER		641
> -#define SRST_H_KEYLADDER		642
> -#define SRST_P_OTPC_S			643
> -#define SRST_OTPC_S			644
> -#define SRST_WDT_S			645
> -
> -#define SRST_T_WDT_S			646
> -#define SRST_H_BOOTROM			647
> -#define SRST_A_DCF			648
> -#define SRST_P_DCF			649
> -#define SRST_H_BOOTROM_NS		650
> -#define SRST_P_KEYLADDER		651
> -#define SRST_H_TRNG_S			652
> -
> -#define SRST_H_TRNG_NS			653
> -#define SRST_D_SDMMC_BUFFER		654
> -#define SRST_H_SDMMC			655
> -#define SRST_H_SDMMC_BUFFER		656
> -#define SRST_SDMMC			657
> -#define SRST_P_TRNG_CHK			658
> -#define SRST_TRNG_S			659
> +#define SRST_A_SECURE_NS_BIU		10

NAK. You just broke all users.


Best regards,
Krzysztof
  
Heiko Stübner Nov. 7, 2023, 5:35 p.m. UTC | #2
Am Dienstag, 7. November 2023, 17:21:41 CET schrieb Krzysztof Kozlowski:
> On 07/11/2023 16:55, Corentin Labbe wrote:
> > While working on the rk3588 crypto driver, I loose lot of time
> > understanding why resetting the IP failed.
> > This is due to RK3588_SECURECRU_RESET_OFFSET being in the secure world,
> > so impossible to operate on it from the kernel.
> > All resets in this block must be handled via SCMI call.
> > 
> > Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> > ---
> >  drivers/clk/rockchip/rst-rk3588.c             | 42 ------------
> >  .../dt-bindings/reset/rockchip,rk3588-cru.h   | 68 +++++++++----------
> 
> Please run scripts/checkpatch.pl and fix reported warnings. Some
> warnings can be ignored, but the code here looks like it needs a fix.
> Feel free to get in touch if the warning is not clear.
> 
> >  2 files changed, 34 insertions(+), 76 deletions(-)
> > 
> > diff --git a/drivers/clk/rockchip/rst-rk3588.c b/drivers/clk/rockchip/rst-rk3588.c
> > index e855bb8d5413..6556d9d3c7ab 100644
> > --- a/drivers/clk/rockchip/rst-rk3588.c
> > +++ b/drivers/clk/rockchip/rst-rk3588.c
> > @@ -16,9 +16,6 @@
> >  /* 0xFD7C8000 + 0x0A00 */
> >  #define RK3588_PHPTOPCRU_RESET_OFFSET(id, reg, bit) [id] = (0x8000*4 + reg * 16 + bit)
> >  
> > -/* 0xFD7D0000 + 0x0A00 */
> > -#define RK3588_SECURECRU_RESET_OFFSET(id, reg, bit) [id] = (0x10000*4 + reg * 16 + bit)
> > -
> >  /* 0xFD7F0000 + 0x0A00 */
> >  #define RK3588_PMU1CRU_RESET_OFFSET(id, reg, bit) [id] = (0x30000*4 + reg * 16 + bit)
> >  
> > @@ -806,45 +803,6 @@ static const int rk3588_register_offset[] = {
> >  	RK3588_PMU1CRU_RESET_OFFSET(SRST_P_PMU0IOC, 5, 4),
> >  	RK3588_PMU1CRU_RESET_OFFSET(SRST_P_GPIO0, 5, 5),
> >  	RK3588_PMU1CRU_RESET_OFFSET(SRST_GPIO0, 5, 6),
> > -
> > -	/* SECURECRU_SOFTRST_CON00 */
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_SECURE_NS_BIU, 0, 10),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SECURE_NS_BIU, 0, 11),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_SECURE_S_BIU, 0, 12),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SECURE_S_BIU, 0, 13),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_SECURE_S_BIU, 0, 14),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_CORE, 0, 15),
> > -
> > -	/* SECURECRU_SOFTRST_CON01 */
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_PKA, 1, 0),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_RNG, 1, 1),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_CRYPTO, 1, 2),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_CRYPTO, 1, 3),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_KEYLADDER_CORE, 1, 9),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_KEYLADDER_RNG, 1, 10),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_KEYLADDER, 1, 11),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_KEYLADDER, 1, 12),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_OTPC_S, 1, 13),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_OTPC_S, 1, 14),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_WDT_S, 1, 15),
> > -
> > -	/* SECURECRU_SOFTRST_CON02 */
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_T_WDT_S, 2, 0),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_BOOTROM, 2, 1),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_DCF, 2, 2),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_DCF, 2, 3),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_BOOTROM_NS, 2, 5),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_KEYLADDER, 2, 14),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_TRNG_S, 2, 15),
> > -
> > -	/* SECURECRU_SOFTRST_CON03 */
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_TRNG_NS, 3, 0),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_D_SDMMC_BUFFER, 3, 1),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SDMMC, 3, 2),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SDMMC_BUFFER, 3, 3),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_SDMMC, 3, 4),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_TRNG_CHK, 3, 5),
> > -	RK3588_SECURECRU_RESET_OFFSET(SRST_TRNG_S, 3, 6),
> >  };
> >  
> >  void rk3588_rst_init(struct device_node *np, void __iomem *reg_base)
> > diff --git a/include/dt-bindings/reset/rockchip,rk3588-cru.h b/include/dt-bindings/reset/rockchip,rk3588-cru.h
> > index d4264db2a07f..c0d08ae78cd5 100644
> > --- a/include/dt-bindings/reset/rockchip,rk3588-cru.h
> > +++ b/include/dt-bindings/reset/rockchip,rk3588-cru.h
> > @@ -716,39 +716,39 @@
> >  #define SRST_P_GPIO0			627
> >  #define SRST_GPIO0			628
> >  
> > -#define SRST_A_SECURE_NS_BIU		629
> > -#define SRST_H_SECURE_NS_BIU		630
> > -#define SRST_A_SECURE_S_BIU		631
> > -#define SRST_H_SECURE_S_BIU		632
> > -#define SRST_P_SECURE_S_BIU		633
> > -#define SRST_CRYPTO_CORE		634
> > -
> > -#define SRST_CRYPTO_PKA			635
> > -#define SRST_CRYPTO_RNG			636
> > -#define SRST_A_CRYPTO			637
> > -#define SRST_H_CRYPTO			638
> > -#define SRST_KEYLADDER_CORE		639
> > -#define SRST_KEYLADDER_RNG		640
> > -#define SRST_A_KEYLADDER		641
> > -#define SRST_H_KEYLADDER		642
> > -#define SRST_P_OTPC_S			643
> > -#define SRST_OTPC_S			644
> > -#define SRST_WDT_S			645
> > -
> > -#define SRST_T_WDT_S			646
> > -#define SRST_H_BOOTROM			647
> > -#define SRST_A_DCF			648
> > -#define SRST_P_DCF			649
> > -#define SRST_H_BOOTROM_NS		650
> > -#define SRST_P_KEYLADDER		651
> > -#define SRST_H_TRNG_S			652
> > -
> > -#define SRST_H_TRNG_NS			653
> > -#define SRST_D_SDMMC_BUFFER		654
> > -#define SRST_H_SDMMC			655
> > -#define SRST_H_SDMMC_BUFFER		656
> > -#define SRST_SDMMC			657
> > -#define SRST_P_TRNG_CHK			658
> > -#define SRST_TRNG_S			659
> > +#define SRST_A_SECURE_NS_BIU		10
> 
> NAK. You just broke all users.

If I'm reading the commit message correctly, all resets in that area
couldn't have any users to begin with, as the registers controlling them
are in the secure space, and need a higher exception level

So if  anything is trying to handle these resets, would end up with some
security exception right now.

Though I guess we might want to use different names and not reuse the
existing ones. scmi clocks use a SCMI_CLK_* id scheme, so maybe SCMI_SRST_* ?
  
Krzysztof Kozlowski Nov. 7, 2023, 5:45 p.m. UTC | #3
On 07/11/2023 18:35, Heiko Stübner wrote:
> Am Dienstag, 7. November 2023, 17:21:41 CET schrieb Krzysztof Kozlowski:
>> On 07/11/2023 16:55, Corentin Labbe wrote:
>>> While working on the rk3588 crypto driver, I loose lot of time
>>> understanding why resetting the IP failed.
>>> This is due to RK3588_SECURECRU_RESET_OFFSET being in the secure world,
>>> so impossible to operate on it from the kernel.
>>> All resets in this block must be handled via SCMI call.
>>>
>>> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
>>> ---
>>>  drivers/clk/rockchip/rst-rk3588.c             | 42 ------------
>>>  .../dt-bindings/reset/rockchip,rk3588-cru.h   | 68 +++++++++----------
>>
>> Please run scripts/checkpatch.pl and fix reported warnings. Some
>> warnings can be ignored, but the code here looks like it needs a fix.
>> Feel free to get in touch if the warning is not clear.
>>
>>>  2 files changed, 34 insertions(+), 76 deletions(-)
>>>
>>> diff --git a/drivers/clk/rockchip/rst-rk3588.c b/drivers/clk/rockchip/rst-rk3588.c
>>> index e855bb8d5413..6556d9d3c7ab 100644
>>> --- a/drivers/clk/rockchip/rst-rk3588.c
>>> +++ b/drivers/clk/rockchip/rst-rk3588.c
>>> @@ -16,9 +16,6 @@
>>>  /* 0xFD7C8000 + 0x0A00 */
>>>  #define RK3588_PHPTOPCRU_RESET_OFFSET(id, reg, bit) [id] = (0x8000*4 + reg * 16 + bit)
>>>  
>>> -/* 0xFD7D0000 + 0x0A00 */
>>> -#define RK3588_SECURECRU_RESET_OFFSET(id, reg, bit) [id] = (0x10000*4 + reg * 16 + bit)
>>> -
>>>  /* 0xFD7F0000 + 0x0A00 */
>>>  #define RK3588_PMU1CRU_RESET_OFFSET(id, reg, bit) [id] = (0x30000*4 + reg * 16 + bit)
>>>  
>>> @@ -806,45 +803,6 @@ static const int rk3588_register_offset[] = {
>>>  	RK3588_PMU1CRU_RESET_OFFSET(SRST_P_PMU0IOC, 5, 4),
>>>  	RK3588_PMU1CRU_RESET_OFFSET(SRST_P_GPIO0, 5, 5),
>>>  	RK3588_PMU1CRU_RESET_OFFSET(SRST_GPIO0, 5, 6),
>>> -
>>> -	/* SECURECRU_SOFTRST_CON00 */
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_SECURE_NS_BIU, 0, 10),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SECURE_NS_BIU, 0, 11),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_SECURE_S_BIU, 0, 12),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SECURE_S_BIU, 0, 13),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_SECURE_S_BIU, 0, 14),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_CORE, 0, 15),
>>> -
>>> -	/* SECURECRU_SOFTRST_CON01 */
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_PKA, 1, 0),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_RNG, 1, 1),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_CRYPTO, 1, 2),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_CRYPTO, 1, 3),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_KEYLADDER_CORE, 1, 9),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_KEYLADDER_RNG, 1, 10),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_KEYLADDER, 1, 11),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_KEYLADDER, 1, 12),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_OTPC_S, 1, 13),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_OTPC_S, 1, 14),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_WDT_S, 1, 15),
>>> -
>>> -	/* SECURECRU_SOFTRST_CON02 */
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_T_WDT_S, 2, 0),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_BOOTROM, 2, 1),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_DCF, 2, 2),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_DCF, 2, 3),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_BOOTROM_NS, 2, 5),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_KEYLADDER, 2, 14),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_TRNG_S, 2, 15),
>>> -
>>> -	/* SECURECRU_SOFTRST_CON03 */
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_TRNG_NS, 3, 0),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_D_SDMMC_BUFFER, 3, 1),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SDMMC, 3, 2),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SDMMC_BUFFER, 3, 3),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_SDMMC, 3, 4),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_TRNG_CHK, 3, 5),
>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_TRNG_S, 3, 6),
>>>  };
>>>  
>>>  void rk3588_rst_init(struct device_node *np, void __iomem *reg_base)
>>> diff --git a/include/dt-bindings/reset/rockchip,rk3588-cru.h b/include/dt-bindings/reset/rockchip,rk3588-cru.h
>>> index d4264db2a07f..c0d08ae78cd5 100644
>>> --- a/include/dt-bindings/reset/rockchip,rk3588-cru.h
>>> +++ b/include/dt-bindings/reset/rockchip,rk3588-cru.h
>>> @@ -716,39 +716,39 @@
>>>  #define SRST_P_GPIO0			627
>>>  #define SRST_GPIO0			628
>>>  
>>> -#define SRST_A_SECURE_NS_BIU		629
>>> -#define SRST_H_SECURE_NS_BIU		630
>>> -#define SRST_A_SECURE_S_BIU		631
>>> -#define SRST_H_SECURE_S_BIU		632
>>> -#define SRST_P_SECURE_S_BIU		633
>>> -#define SRST_CRYPTO_CORE		634
>>> -
>>> -#define SRST_CRYPTO_PKA			635
>>> -#define SRST_CRYPTO_RNG			636
>>> -#define SRST_A_CRYPTO			637
>>> -#define SRST_H_CRYPTO			638
>>> -#define SRST_KEYLADDER_CORE		639
>>> -#define SRST_KEYLADDER_RNG		640
>>> -#define SRST_A_KEYLADDER		641
>>> -#define SRST_H_KEYLADDER		642
>>> -#define SRST_P_OTPC_S			643
>>> -#define SRST_OTPC_S			644
>>> -#define SRST_WDT_S			645
>>> -
>>> -#define SRST_T_WDT_S			646
>>> -#define SRST_H_BOOTROM			647
>>> -#define SRST_A_DCF			648
>>> -#define SRST_P_DCF			649
>>> -#define SRST_H_BOOTROM_NS		650
>>> -#define SRST_P_KEYLADDER		651
>>> -#define SRST_H_TRNG_S			652
>>> -
>>> -#define SRST_H_TRNG_NS			653
>>> -#define SRST_D_SDMMC_BUFFER		654
>>> -#define SRST_H_SDMMC			655
>>> -#define SRST_H_SDMMC_BUFFER		656
>>> -#define SRST_SDMMC			657
>>> -#define SRST_P_TRNG_CHK			658
>>> -#define SRST_TRNG_S			659
>>> +#define SRST_A_SECURE_NS_BIU		10
>>
>> NAK. You just broke all users.
> 
> If I'm reading the commit message correctly, all resets in that area
> couldn't have any users to begin with, as the registers controlling them
> are in the secure space, and need a higher exception level
> 
> So if  anything is trying to handle these resets, would end up with some
> security exception right now.
> 
> Though I guess we might want to use different names and not reuse the
> existing ones. scmi clocks use a SCMI_CLK_* id scheme, so maybe SCMI_SRST_* ?

I don't quite get what the patch wants to achieve. Why dropping driver
support for given reset ID is connected with changing the value of
binding for given reset?

What is the point of this define SRST_A_SECURE_NS_BIU 10?

Best regards,
Krzysztof
  
Sebastian Reichel Nov. 11, 2023, 8:51 p.m. UTC | #4
Hi,

On Tue, Nov 07, 2023 at 06:45:03PM +0100, Krzysztof Kozlowski wrote:
> On 07/11/2023 18:35, Heiko Stübner wrote:
> > Am Dienstag, 7. November 2023, 17:21:41 CET schrieb Krzysztof Kozlowski:
> >> On 07/11/2023 16:55, Corentin Labbe wrote:
> >>> While working on the rk3588 crypto driver, I loose lot of time
> >>> understanding why resetting the IP failed.
> >>> This is due to RK3588_SECURECRU_RESET_OFFSET being in the secure world,
> >>> so impossible to operate on it from the kernel.
> >>> All resets in this block must be handled via SCMI call.
> >>>
> >>> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> >>> ---
> >>>  drivers/clk/rockchip/rst-rk3588.c             | 42 ------------
> >>>  .../dt-bindings/reset/rockchip,rk3588-cru.h   | 68 +++++++++----------
> >>
> >> Please run scripts/checkpatch.pl and fix reported warnings. Some
> >> warnings can be ignored, but the code here looks like it needs a fix.
> >> Feel free to get in touch if the warning is not clear.
> >>
> >>>  2 files changed, 34 insertions(+), 76 deletions(-)
> >>>
> >>> diff --git a/drivers/clk/rockchip/rst-rk3588.c b/drivers/clk/rockchip/rst-rk3588.c
> >>> index e855bb8d5413..6556d9d3c7ab 100644
> >>> --- a/drivers/clk/rockchip/rst-rk3588.c
> >>> +++ b/drivers/clk/rockchip/rst-rk3588.c
> >>> @@ -16,9 +16,6 @@
> >>>  /* 0xFD7C8000 + 0x0A00 */
> >>>  #define RK3588_PHPTOPCRU_RESET_OFFSET(id, reg, bit) [id] = (0x8000*4 + reg * 16 + bit)
> >>>  
> >>> -/* 0xFD7D0000 + 0x0A00 */
> >>> -#define RK3588_SECURECRU_RESET_OFFSET(id, reg, bit) [id] = (0x10000*4 + reg * 16 + bit)
> >>> -
> >>>  /* 0xFD7F0000 + 0x0A00 */
> >>>  #define RK3588_PMU1CRU_RESET_OFFSET(id, reg, bit) [id] = (0x30000*4 + reg * 16 + bit)
> >>>  
> >>> @@ -806,45 +803,6 @@ static const int rk3588_register_offset[] = {
> >>>  	RK3588_PMU1CRU_RESET_OFFSET(SRST_P_PMU0IOC, 5, 4),
> >>>  	RK3588_PMU1CRU_RESET_OFFSET(SRST_P_GPIO0, 5, 5),
> >>>  	RK3588_PMU1CRU_RESET_OFFSET(SRST_GPIO0, 5, 6),
> >>> -
> >>> -	/* SECURECRU_SOFTRST_CON00 */
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_SECURE_NS_BIU, 0, 10),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SECURE_NS_BIU, 0, 11),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_SECURE_S_BIU, 0, 12),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SECURE_S_BIU, 0, 13),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_SECURE_S_BIU, 0, 14),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_CORE, 0, 15),
> >>> -
> >>> -	/* SECURECRU_SOFTRST_CON01 */
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_PKA, 1, 0),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_RNG, 1, 1),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_CRYPTO, 1, 2),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_CRYPTO, 1, 3),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_KEYLADDER_CORE, 1, 9),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_KEYLADDER_RNG, 1, 10),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_KEYLADDER, 1, 11),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_KEYLADDER, 1, 12),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_OTPC_S, 1, 13),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_OTPC_S, 1, 14),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_WDT_S, 1, 15),
> >>> -
> >>> -	/* SECURECRU_SOFTRST_CON02 */
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_T_WDT_S, 2, 0),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_BOOTROM, 2, 1),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_DCF, 2, 2),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_DCF, 2, 3),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_BOOTROM_NS, 2, 5),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_KEYLADDER, 2, 14),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_TRNG_S, 2, 15),
> >>> -
> >>> -	/* SECURECRU_SOFTRST_CON03 */
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_TRNG_NS, 3, 0),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_D_SDMMC_BUFFER, 3, 1),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SDMMC, 3, 2),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SDMMC_BUFFER, 3, 3),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_SDMMC, 3, 4),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_TRNG_CHK, 3, 5),
> >>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_TRNG_S, 3, 6),
> >>>  };
> >>>  
> >>>  void rk3588_rst_init(struct device_node *np, void __iomem *reg_base)
> >>> diff --git a/include/dt-bindings/reset/rockchip,rk3588-cru.h b/include/dt-bindings/reset/rockchip,rk3588-cru.h
> >>> index d4264db2a07f..c0d08ae78cd5 100644
> >>> --- a/include/dt-bindings/reset/rockchip,rk3588-cru.h
> >>> +++ b/include/dt-bindings/reset/rockchip,rk3588-cru.h
> >>> @@ -716,39 +716,39 @@
> >>>  #define SRST_P_GPIO0			627
> >>>  #define SRST_GPIO0			628
> >>>  
> >>> -#define SRST_A_SECURE_NS_BIU		629
> >>> -#define SRST_H_SECURE_NS_BIU		630
> >>> -#define SRST_A_SECURE_S_BIU		631
> >>> -#define SRST_H_SECURE_S_BIU		632
> >>> -#define SRST_P_SECURE_S_BIU		633
> >>> -#define SRST_CRYPTO_CORE		634
> >>> -
> >>> -#define SRST_CRYPTO_PKA			635
> >>> -#define SRST_CRYPTO_RNG			636
> >>> -#define SRST_A_CRYPTO			637
> >>> -#define SRST_H_CRYPTO			638
> >>> -#define SRST_KEYLADDER_CORE		639
> >>> -#define SRST_KEYLADDER_RNG		640
> >>> -#define SRST_A_KEYLADDER		641
> >>> -#define SRST_H_KEYLADDER		642
> >>> -#define SRST_P_OTPC_S			643
> >>> -#define SRST_OTPC_S			644
> >>> -#define SRST_WDT_S			645
> >>> -
> >>> -#define SRST_T_WDT_S			646
> >>> -#define SRST_H_BOOTROM			647
> >>> -#define SRST_A_DCF			648
> >>> -#define SRST_P_DCF			649
> >>> -#define SRST_H_BOOTROM_NS		650
> >>> -#define SRST_P_KEYLADDER		651
> >>> -#define SRST_H_TRNG_S			652
> >>> -
> >>> -#define SRST_H_TRNG_NS			653
> >>> -#define SRST_D_SDMMC_BUFFER		654
> >>> -#define SRST_H_SDMMC			655
> >>> -#define SRST_H_SDMMC_BUFFER		656
> >>> -#define SRST_SDMMC			657
> >>> -#define SRST_P_TRNG_CHK			658
> >>> -#define SRST_TRNG_S			659
> >>> +#define SRST_A_SECURE_NS_BIU		10
> >>
> >> NAK. You just broke all users.
> > 
> > If I'm reading the commit message correctly, all resets in that area
> > couldn't have any users to begin with, as the registers controlling them
> > are in the secure space, and need a higher exception level
> > 
> > So if  anything is trying to handle these resets, would end up with some
> > security exception right now.
> > 
> > Though I guess we might want to use different names and not reuse the
> > existing ones. scmi clocks use a SCMI_CLK_* id scheme, so maybe SCMI_SRST_* ?
> 
> I don't quite get what the patch wants to achieve. Why dropping driver
> support for given reset ID is connected with changing the value of
> binding for given reset?
> 
> What is the point of this define SRST_A_SECURE_NS_BIU 10?

This is about two different reset controllers. The IDs defined here
are used by the operating system to access the correct registers.
The kernel has a LUT from the ID to a register addresses, which is
something you asked for during upstreaming.

The ID defined by Corentin is for reset control via SCMI firmware,
which has different number scheme than Linux. To me the suggestion
from Heiko looks sensible (i.e. create a new ID scheme and keep the
current one unchanged).

Greetings,

-- Sebastian
  
Krzysztof Kozlowski Nov. 11, 2023, 9:28 p.m. UTC | #5
On 11/11/2023 21:51, Sebastian Reichel wrote:
> Hi,
> 
> On Tue, Nov 07, 2023 at 06:45:03PM +0100, Krzysztof Kozlowski wrote:
>> On 07/11/2023 18:35, Heiko Stübner wrote:
>>> Am Dienstag, 7. November 2023, 17:21:41 CET schrieb Krzysztof Kozlowski:
>>>> On 07/11/2023 16:55, Corentin Labbe wrote:
>>>>> While working on the rk3588 crypto driver, I loose lot of time
>>>>> understanding why resetting the IP failed.
>>>>> This is due to RK3588_SECURECRU_RESET_OFFSET being in the secure world,
>>>>> so impossible to operate on it from the kernel.
>>>>> All resets in this block must be handled via SCMI call.
>>>>>
>>>>> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
>>>>> ---
>>>>>  drivers/clk/rockchip/rst-rk3588.c             | 42 ------------
>>>>>  .../dt-bindings/reset/rockchip,rk3588-cru.h   | 68 +++++++++----------
>>>>
>>>> Please run scripts/checkpatch.pl and fix reported warnings. Some
>>>> warnings can be ignored, but the code here looks like it needs a fix.
>>>> Feel free to get in touch if the warning is not clear.
>>>>
>>>>>  2 files changed, 34 insertions(+), 76 deletions(-)
>>>>>
>>>>> diff --git a/drivers/clk/rockchip/rst-rk3588.c b/drivers/clk/rockchip/rst-rk3588.c
>>>>> index e855bb8d5413..6556d9d3c7ab 100644
>>>>> --- a/drivers/clk/rockchip/rst-rk3588.c
>>>>> +++ b/drivers/clk/rockchip/rst-rk3588.c
>>>>> @@ -16,9 +16,6 @@
>>>>>  /* 0xFD7C8000 + 0x0A00 */
>>>>>  #define RK3588_PHPTOPCRU_RESET_OFFSET(id, reg, bit) [id] = (0x8000*4 + reg * 16 + bit)
>>>>>  
>>>>> -/* 0xFD7D0000 + 0x0A00 */
>>>>> -#define RK3588_SECURECRU_RESET_OFFSET(id, reg, bit) [id] = (0x10000*4 + reg * 16 + bit)
>>>>> -
>>>>>  /* 0xFD7F0000 + 0x0A00 */
>>>>>  #define RK3588_PMU1CRU_RESET_OFFSET(id, reg, bit) [id] = (0x30000*4 + reg * 16 + bit)
>>>>>  
>>>>> @@ -806,45 +803,6 @@ static const int rk3588_register_offset[] = {
>>>>>  	RK3588_PMU1CRU_RESET_OFFSET(SRST_P_PMU0IOC, 5, 4),
>>>>>  	RK3588_PMU1CRU_RESET_OFFSET(SRST_P_GPIO0, 5, 5),
>>>>>  	RK3588_PMU1CRU_RESET_OFFSET(SRST_GPIO0, 5, 6),
>>>>> -
>>>>> -	/* SECURECRU_SOFTRST_CON00 */
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_SECURE_NS_BIU, 0, 10),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SECURE_NS_BIU, 0, 11),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_SECURE_S_BIU, 0, 12),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SECURE_S_BIU, 0, 13),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_SECURE_S_BIU, 0, 14),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_CORE, 0, 15),
>>>>> -
>>>>> -	/* SECURECRU_SOFTRST_CON01 */
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_PKA, 1, 0),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_RNG, 1, 1),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_CRYPTO, 1, 2),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_CRYPTO, 1, 3),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_KEYLADDER_CORE, 1, 9),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_KEYLADDER_RNG, 1, 10),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_KEYLADDER, 1, 11),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_KEYLADDER, 1, 12),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_OTPC_S, 1, 13),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_OTPC_S, 1, 14),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_WDT_S, 1, 15),
>>>>> -
>>>>> -	/* SECURECRU_SOFTRST_CON02 */
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_T_WDT_S, 2, 0),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_BOOTROM, 2, 1),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_DCF, 2, 2),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_DCF, 2, 3),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_BOOTROM_NS, 2, 5),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_KEYLADDER, 2, 14),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_TRNG_S, 2, 15),
>>>>> -
>>>>> -	/* SECURECRU_SOFTRST_CON03 */
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_TRNG_NS, 3, 0),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_D_SDMMC_BUFFER, 3, 1),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SDMMC, 3, 2),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SDMMC_BUFFER, 3, 3),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_SDMMC, 3, 4),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_TRNG_CHK, 3, 5),
>>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_TRNG_S, 3, 6),
>>>>>  };
>>>>>  
>>>>>  void rk3588_rst_init(struct device_node *np, void __iomem *reg_base)
>>>>> diff --git a/include/dt-bindings/reset/rockchip,rk3588-cru.h b/include/dt-bindings/reset/rockchip,rk3588-cru.h
>>>>> index d4264db2a07f..c0d08ae78cd5 100644
>>>>> --- a/include/dt-bindings/reset/rockchip,rk3588-cru.h
>>>>> +++ b/include/dt-bindings/reset/rockchip,rk3588-cru.h
>>>>> @@ -716,39 +716,39 @@
>>>>>  #define SRST_P_GPIO0			627
>>>>>  #define SRST_GPIO0			628
>>>>>  
>>>>> -#define SRST_A_SECURE_NS_BIU		629
>>>>> -#define SRST_H_SECURE_NS_BIU		630
>>>>> -#define SRST_A_SECURE_S_BIU		631
>>>>> -#define SRST_H_SECURE_S_BIU		632
>>>>> -#define SRST_P_SECURE_S_BIU		633
>>>>> -#define SRST_CRYPTO_CORE		634
>>>>> -
>>>>> -#define SRST_CRYPTO_PKA			635
>>>>> -#define SRST_CRYPTO_RNG			636
>>>>> -#define SRST_A_CRYPTO			637
>>>>> -#define SRST_H_CRYPTO			638
>>>>> -#define SRST_KEYLADDER_CORE		639
>>>>> -#define SRST_KEYLADDER_RNG		640
>>>>> -#define SRST_A_KEYLADDER		641
>>>>> -#define SRST_H_KEYLADDER		642
>>>>> -#define SRST_P_OTPC_S			643
>>>>> -#define SRST_OTPC_S			644
>>>>> -#define SRST_WDT_S			645
>>>>> -
>>>>> -#define SRST_T_WDT_S			646
>>>>> -#define SRST_H_BOOTROM			647
>>>>> -#define SRST_A_DCF			648
>>>>> -#define SRST_P_DCF			649
>>>>> -#define SRST_H_BOOTROM_NS		650
>>>>> -#define SRST_P_KEYLADDER		651
>>>>> -#define SRST_H_TRNG_S			652
>>>>> -
>>>>> -#define SRST_H_TRNG_NS			653
>>>>> -#define SRST_D_SDMMC_BUFFER		654
>>>>> -#define SRST_H_SDMMC			655
>>>>> -#define SRST_H_SDMMC_BUFFER		656
>>>>> -#define SRST_SDMMC			657
>>>>> -#define SRST_P_TRNG_CHK			658
>>>>> -#define SRST_TRNG_S			659
>>>>> +#define SRST_A_SECURE_NS_BIU		10
>>>>
>>>> NAK. You just broke all users.
>>>
>>> If I'm reading the commit message correctly, all resets in that area
>>> couldn't have any users to begin with, as the registers controlling them
>>> are in the secure space, and need a higher exception level
>>>
>>> So if  anything is trying to handle these resets, would end up with some
>>> security exception right now.
>>>
>>> Though I guess we might want to use different names and not reuse the
>>> existing ones. scmi clocks use a SCMI_CLK_* id scheme, so maybe SCMI_SRST_* ?
>>
>> I don't quite get what the patch wants to achieve. Why dropping driver
>> support for given reset ID is connected with changing the value of
>> binding for given reset?
>>
>> What is the point of this define SRST_A_SECURE_NS_BIU 10?
> 
> This is about two different reset controllers. The IDs defined here
> are used by the operating system to access the correct registers.
> The kernel has a LUT from the ID to a register addresses, which is
> something you asked for during upstreaming.
> 
> The ID defined by Corentin is for reset control via SCMI firmware,
> which has different number scheme than Linux. To me the suggestion
> from Heiko looks sensible (i.e. create a new ID scheme and keep the
> current one unchanged).

So the binding is not for Linux but for FW? This should be explained in
the commit msg.

Best regards,
Krzysztof
  
Sebastian Reichel Nov. 12, 2023, 8:26 p.m. UTC | #6
Hi,

On Sat, Nov 11, 2023 at 10:28:59PM +0100, Krzysztof Kozlowski wrote:
> On 11/11/2023 21:51, Sebastian Reichel wrote:
> > Hi,
> > 
> > On Tue, Nov 07, 2023 at 06:45:03PM +0100, Krzysztof Kozlowski wrote:
> >> On 07/11/2023 18:35, Heiko Stübner wrote:
> >>> Am Dienstag, 7. November 2023, 17:21:41 CET schrieb Krzysztof Kozlowski:
> >>>> On 07/11/2023 16:55, Corentin Labbe wrote:
> >>>>> While working on the rk3588 crypto driver, I loose lot of time
> >>>>> understanding why resetting the IP failed.
> >>>>> This is due to RK3588_SECURECRU_RESET_OFFSET being in the secure world,
> >>>>> so impossible to operate on it from the kernel.
> >>>>> All resets in this block must be handled via SCMI call.
> >>>>>
> >>>>> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> >>>>> ---
> >>>>>  drivers/clk/rockchip/rst-rk3588.c             | 42 ------------
> >>>>>  .../dt-bindings/reset/rockchip,rk3588-cru.h   | 68 +++++++++----------
> >>>>
> >>>> Please run scripts/checkpatch.pl and fix reported warnings. Some
> >>>> warnings can be ignored, but the code here looks like it needs a fix.
> >>>> Feel free to get in touch if the warning is not clear.
> >>>>
> >>>>>  2 files changed, 34 insertions(+), 76 deletions(-)
> >>>>>
> >>>>> diff --git a/drivers/clk/rockchip/rst-rk3588.c b/drivers/clk/rockchip/rst-rk3588.c
> >>>>> index e855bb8d5413..6556d9d3c7ab 100644
> >>>>> --- a/drivers/clk/rockchip/rst-rk3588.c
> >>>>> +++ b/drivers/clk/rockchip/rst-rk3588.c
> >>>>> @@ -16,9 +16,6 @@
> >>>>>  /* 0xFD7C8000 + 0x0A00 */
> >>>>>  #define RK3588_PHPTOPCRU_RESET_OFFSET(id, reg, bit) [id] = (0x8000*4 + reg * 16 + bit)
> >>>>>  
> >>>>> -/* 0xFD7D0000 + 0x0A00 */
> >>>>> -#define RK3588_SECURECRU_RESET_OFFSET(id, reg, bit) [id] = (0x10000*4 + reg * 16 + bit)
> >>>>> -
> >>>>>  /* 0xFD7F0000 + 0x0A00 */
> >>>>>  #define RK3588_PMU1CRU_RESET_OFFSET(id, reg, bit) [id] = (0x30000*4 + reg * 16 + bit)
> >>>>>  
> >>>>> @@ -806,45 +803,6 @@ static const int rk3588_register_offset[] = {
> >>>>>  	RK3588_PMU1CRU_RESET_OFFSET(SRST_P_PMU0IOC, 5, 4),
> >>>>>  	RK3588_PMU1CRU_RESET_OFFSET(SRST_P_GPIO0, 5, 5),
> >>>>>  	RK3588_PMU1CRU_RESET_OFFSET(SRST_GPIO0, 5, 6),
> >>>>> -
> >>>>> -	/* SECURECRU_SOFTRST_CON00 */
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_SECURE_NS_BIU, 0, 10),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SECURE_NS_BIU, 0, 11),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_SECURE_S_BIU, 0, 12),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SECURE_S_BIU, 0, 13),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_SECURE_S_BIU, 0, 14),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_CORE, 0, 15),
> >>>>> -
> >>>>> -	/* SECURECRU_SOFTRST_CON01 */
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_PKA, 1, 0),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_RNG, 1, 1),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_CRYPTO, 1, 2),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_CRYPTO, 1, 3),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_KEYLADDER_CORE, 1, 9),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_KEYLADDER_RNG, 1, 10),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_KEYLADDER, 1, 11),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_KEYLADDER, 1, 12),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_OTPC_S, 1, 13),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_OTPC_S, 1, 14),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_WDT_S, 1, 15),
> >>>>> -
> >>>>> -	/* SECURECRU_SOFTRST_CON02 */
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_T_WDT_S, 2, 0),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_BOOTROM, 2, 1),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_DCF, 2, 2),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_DCF, 2, 3),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_BOOTROM_NS, 2, 5),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_KEYLADDER, 2, 14),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_TRNG_S, 2, 15),
> >>>>> -
> >>>>> -	/* SECURECRU_SOFTRST_CON03 */
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_TRNG_NS, 3, 0),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_D_SDMMC_BUFFER, 3, 1),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SDMMC, 3, 2),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SDMMC_BUFFER, 3, 3),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_SDMMC, 3, 4),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_TRNG_CHK, 3, 5),
> >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_TRNG_S, 3, 6),
> >>>>>  };
> >>>>>  
> >>>>>  void rk3588_rst_init(struct device_node *np, void __iomem *reg_base)
> >>>>> diff --git a/include/dt-bindings/reset/rockchip,rk3588-cru.h b/include/dt-bindings/reset/rockchip,rk3588-cru.h
> >>>>> index d4264db2a07f..c0d08ae78cd5 100644
> >>>>> --- a/include/dt-bindings/reset/rockchip,rk3588-cru.h
> >>>>> +++ b/include/dt-bindings/reset/rockchip,rk3588-cru.h
> >>>>> @@ -716,39 +716,39 @@
> >>>>>  #define SRST_P_GPIO0			627
> >>>>>  #define SRST_GPIO0			628
> >>>>>  
> >>>>> -#define SRST_A_SECURE_NS_BIU		629
> >>>>> -#define SRST_H_SECURE_NS_BIU		630
> >>>>> -#define SRST_A_SECURE_S_BIU		631
> >>>>> -#define SRST_H_SECURE_S_BIU		632
> >>>>> -#define SRST_P_SECURE_S_BIU		633
> >>>>> -#define SRST_CRYPTO_CORE		634
> >>>>> -
> >>>>> -#define SRST_CRYPTO_PKA			635
> >>>>> -#define SRST_CRYPTO_RNG			636
> >>>>> -#define SRST_A_CRYPTO			637
> >>>>> -#define SRST_H_CRYPTO			638
> >>>>> -#define SRST_KEYLADDER_CORE		639
> >>>>> -#define SRST_KEYLADDER_RNG		640
> >>>>> -#define SRST_A_KEYLADDER		641
> >>>>> -#define SRST_H_KEYLADDER		642
> >>>>> -#define SRST_P_OTPC_S			643
> >>>>> -#define SRST_OTPC_S			644
> >>>>> -#define SRST_WDT_S			645
> >>>>> -
> >>>>> -#define SRST_T_WDT_S			646
> >>>>> -#define SRST_H_BOOTROM			647
> >>>>> -#define SRST_A_DCF			648
> >>>>> -#define SRST_P_DCF			649
> >>>>> -#define SRST_H_BOOTROM_NS		650
> >>>>> -#define SRST_P_KEYLADDER		651
> >>>>> -#define SRST_H_TRNG_S			652
> >>>>> -
> >>>>> -#define SRST_H_TRNG_NS			653
> >>>>> -#define SRST_D_SDMMC_BUFFER		654
> >>>>> -#define SRST_H_SDMMC			655
> >>>>> -#define SRST_H_SDMMC_BUFFER		656
> >>>>> -#define SRST_SDMMC			657
> >>>>> -#define SRST_P_TRNG_CHK			658
> >>>>> -#define SRST_TRNG_S			659
> >>>>> +#define SRST_A_SECURE_NS_BIU		10
> >>>>
> >>>> NAK. You just broke all users.
> >>>
> >>> If I'm reading the commit message correctly, all resets in that area
> >>> couldn't have any users to begin with, as the registers controlling them
> >>> are in the secure space, and need a higher exception level
> >>>
> >>> So if  anything is trying to handle these resets, would end up with some
> >>> security exception right now.
> >>>
> >>> Though I guess we might want to use different names and not reuse the
> >>> existing ones. scmi clocks use a SCMI_CLK_* id scheme, so maybe SCMI_SRST_* ?
> >>
> >> I don't quite get what the patch wants to achieve. Why dropping driver
> >> support for given reset ID is connected with changing the value of
> >> binding for given reset?
> >>
> >> What is the point of this define SRST_A_SECURE_NS_BIU 10?
> > 
> > This is about two different reset controllers. The IDs defined here
> > are used by the operating system to access the correct registers.
> > The kernel has a LUT from the ID to a register addresses, which is
> > something you asked for during upstreaming.
> > 
> > The ID defined by Corentin is for reset control via SCMI firmware,
> > which has different number scheme than Linux. To me the suggestion
> > from Heiko looks sensible (i.e. create a new ID scheme and keep the
> > current one unchanged).
> 
> So the binding is not for Linux but for FW? This should be explained in
> the commit msg.

No.

The current binding describes reset IDs, which are mapped by the
Linux driver to register offsets in the CRU (clock-reset-unit).
But accessing the crypto reset line directly from Linux (which
usually does not run in secure state) will fail. Accessing it
from correct security context with the current binding is fine
though. Considering we are sharing the bindings with e.g.
U-Boot, I suggest to keep the currently defined IDs.

But Corentin tries to get this running on Linux. For that he
needs to ask the (SCMI) firmware running in secure state to
please take care of the reset. The firmware is using different
reset IDs (apparently the ones used by downstream Linux, which
are derived from register offset).

In DT the difference looks like this (check the different phandles):

#define SRST_A_SECURE_NS_BIU 629
crypto-old {
    // existing binding from Linux perspective
    // reset via direct CRU access
    // NOTE: permission denied
    resets = <&cru SRST_A_SECURE_NS_BIU>; 
};

#define SCMI_RST_A_SECURE_NS_BIU 10
crypto-new {
    // new binding from Linux perspective
    // reset via SCMI firmware request
    resets = <&scmi SCMI_RST_A_SECURE_NS_BIU>;
};

Instead of introducing SCMI_RST_A_SECURE_NS_BIU, Corentin
currently just redefines SRST_A_SECURE_NS_BIU. This is quite
misleading. If somebody does '<&cru SRST_A_SECURE_NS_BIU>'
with the '10' value for SCMI, it instead resets
SRST_A_TOP_M300_BIU.

So my suggestion is to go with the suggestion from Heiko and
introduce SCMI_RST_A_SECURE_NS_BIU (or something similar).
That also matches how the SCMI clks on RK3588 and some other
platforms. See e.g.:

of include/dt-bindings/clock/rockchip,rk3588-cru.h.

Greetings,

-- Sebastian
  
Corentin LABBE Nov. 20, 2023, 12:42 p.m. UTC | #7
Le Sun, Nov 12, 2023 at 09:26:39PM +0100, Sebastian Reichel a écrit :
> Hi,
> 
> On Sat, Nov 11, 2023 at 10:28:59PM +0100, Krzysztof Kozlowski wrote:
> > On 11/11/2023 21:51, Sebastian Reichel wrote:
> > > Hi,
> > > 
> > > On Tue, Nov 07, 2023 at 06:45:03PM +0100, Krzysztof Kozlowski wrote:
> > >> On 07/11/2023 18:35, Heiko Stübner wrote:
> > >>> Am Dienstag, 7. November 2023, 17:21:41 CET schrieb Krzysztof Kozlowski:
> > >>>> On 07/11/2023 16:55, Corentin Labbe wrote:
> > >>>>> While working on the rk3588 crypto driver, I loose lot of time
> > >>>>> understanding why resetting the IP failed.
> > >>>>> This is due to RK3588_SECURECRU_RESET_OFFSET being in the secure world,
> > >>>>> so impossible to operate on it from the kernel.
> > >>>>> All resets in this block must be handled via SCMI call.
> > >>>>>
> > >>>>> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> > >>>>> ---
> > >>>>>  drivers/clk/rockchip/rst-rk3588.c             | 42 ------------
> > >>>>>  .../dt-bindings/reset/rockchip,rk3588-cru.h   | 68 +++++++++----------
> > >>>>
> > >>>> Please run scripts/checkpatch.pl and fix reported warnings. Some
> > >>>> warnings can be ignored, but the code here looks like it needs a fix.
> > >>>> Feel free to get in touch if the warning is not clear.
> > >>>>
> > >>>>>  2 files changed, 34 insertions(+), 76 deletions(-)
> > >>>>>
> > >>>>> diff --git a/drivers/clk/rockchip/rst-rk3588.c b/drivers/clk/rockchip/rst-rk3588.c
> > >>>>> index e855bb8d5413..6556d9d3c7ab 100644
> > >>>>> --- a/drivers/clk/rockchip/rst-rk3588.c
> > >>>>> +++ b/drivers/clk/rockchip/rst-rk3588.c
> > >>>>> @@ -16,9 +16,6 @@
> > >>>>>  /* 0xFD7C8000 + 0x0A00 */
> > >>>>>  #define RK3588_PHPTOPCRU_RESET_OFFSET(id, reg, bit) [id] = (0x8000*4 + reg * 16 + bit)
> > >>>>>  
> > >>>>> -/* 0xFD7D0000 + 0x0A00 */
> > >>>>> -#define RK3588_SECURECRU_RESET_OFFSET(id, reg, bit) [id] = (0x10000*4 + reg * 16 + bit)
> > >>>>> -
> > >>>>>  /* 0xFD7F0000 + 0x0A00 */
> > >>>>>  #define RK3588_PMU1CRU_RESET_OFFSET(id, reg, bit) [id] = (0x30000*4 + reg * 16 + bit)
> > >>>>>  
> > >>>>> @@ -806,45 +803,6 @@ static const int rk3588_register_offset[] = {
> > >>>>>  	RK3588_PMU1CRU_RESET_OFFSET(SRST_P_PMU0IOC, 5, 4),
> > >>>>>  	RK3588_PMU1CRU_RESET_OFFSET(SRST_P_GPIO0, 5, 5),
> > >>>>>  	RK3588_PMU1CRU_RESET_OFFSET(SRST_GPIO0, 5, 6),
> > >>>>> -
> > >>>>> -	/* SECURECRU_SOFTRST_CON00 */
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_SECURE_NS_BIU, 0, 10),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SECURE_NS_BIU, 0, 11),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_SECURE_S_BIU, 0, 12),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SECURE_S_BIU, 0, 13),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_SECURE_S_BIU, 0, 14),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_CORE, 0, 15),
> > >>>>> -
> > >>>>> -	/* SECURECRU_SOFTRST_CON01 */
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_PKA, 1, 0),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_RNG, 1, 1),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_CRYPTO, 1, 2),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_CRYPTO, 1, 3),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_KEYLADDER_CORE, 1, 9),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_KEYLADDER_RNG, 1, 10),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_KEYLADDER, 1, 11),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_KEYLADDER, 1, 12),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_OTPC_S, 1, 13),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_OTPC_S, 1, 14),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_WDT_S, 1, 15),
> > >>>>> -
> > >>>>> -	/* SECURECRU_SOFTRST_CON02 */
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_T_WDT_S, 2, 0),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_BOOTROM, 2, 1),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_A_DCF, 2, 2),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_DCF, 2, 3),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_BOOTROM_NS, 2, 5),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_KEYLADDER, 2, 14),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_TRNG_S, 2, 15),
> > >>>>> -
> > >>>>> -	/* SECURECRU_SOFTRST_CON03 */
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_TRNG_NS, 3, 0),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_D_SDMMC_BUFFER, 3, 1),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SDMMC, 3, 2),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SDMMC_BUFFER, 3, 3),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_SDMMC, 3, 4),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_P_TRNG_CHK, 3, 5),
> > >>>>> -	RK3588_SECURECRU_RESET_OFFSET(SRST_TRNG_S, 3, 6),
> > >>>>>  };
> > >>>>>  
> > >>>>>  void rk3588_rst_init(struct device_node *np, void __iomem *reg_base)
> > >>>>> diff --git a/include/dt-bindings/reset/rockchip,rk3588-cru.h b/include/dt-bindings/reset/rockchip,rk3588-cru.h
> > >>>>> index d4264db2a07f..c0d08ae78cd5 100644
> > >>>>> --- a/include/dt-bindings/reset/rockchip,rk3588-cru.h
> > >>>>> +++ b/include/dt-bindings/reset/rockchip,rk3588-cru.h
> > >>>>> @@ -716,39 +716,39 @@
> > >>>>>  #define SRST_P_GPIO0			627
> > >>>>>  #define SRST_GPIO0			628
> > >>>>>  
> > >>>>> -#define SRST_A_SECURE_NS_BIU		629
> > >>>>> -#define SRST_H_SECURE_NS_BIU		630
> > >>>>> -#define SRST_A_SECURE_S_BIU		631
> > >>>>> -#define SRST_H_SECURE_S_BIU		632
> > >>>>> -#define SRST_P_SECURE_S_BIU		633
> > >>>>> -#define SRST_CRYPTO_CORE		634
> > >>>>> -
> > >>>>> -#define SRST_CRYPTO_PKA			635
> > >>>>> -#define SRST_CRYPTO_RNG			636
> > >>>>> -#define SRST_A_CRYPTO			637
> > >>>>> -#define SRST_H_CRYPTO			638
> > >>>>> -#define SRST_KEYLADDER_CORE		639
> > >>>>> -#define SRST_KEYLADDER_RNG		640
> > >>>>> -#define SRST_A_KEYLADDER		641
> > >>>>> -#define SRST_H_KEYLADDER		642
> > >>>>> -#define SRST_P_OTPC_S			643
> > >>>>> -#define SRST_OTPC_S			644
> > >>>>> -#define SRST_WDT_S			645
> > >>>>> -
> > >>>>> -#define SRST_T_WDT_S			646
> > >>>>> -#define SRST_H_BOOTROM			647
> > >>>>> -#define SRST_A_DCF			648
> > >>>>> -#define SRST_P_DCF			649
> > >>>>> -#define SRST_H_BOOTROM_NS		650
> > >>>>> -#define SRST_P_KEYLADDER		651
> > >>>>> -#define SRST_H_TRNG_S			652
> > >>>>> -
> > >>>>> -#define SRST_H_TRNG_NS			653
> > >>>>> -#define SRST_D_SDMMC_BUFFER		654
> > >>>>> -#define SRST_H_SDMMC			655
> > >>>>> -#define SRST_H_SDMMC_BUFFER		656
> > >>>>> -#define SRST_SDMMC			657
> > >>>>> -#define SRST_P_TRNG_CHK			658
> > >>>>> -#define SRST_TRNG_S			659
> > >>>>> +#define SRST_A_SECURE_NS_BIU		10
> > >>>>
> > >>>> NAK. You just broke all users.
> > >>>
> > >>> If I'm reading the commit message correctly, all resets in that area
> > >>> couldn't have any users to begin with, as the registers controlling them
> > >>> are in the secure space, and need a higher exception level
> > >>>
> > >>> So if  anything is trying to handle these resets, would end up with some
> > >>> security exception right now.
> > >>>
> > >>> Though I guess we might want to use different names and not reuse the
> > >>> existing ones. scmi clocks use a SCMI_CLK_* id scheme, so maybe SCMI_SRST_* ?
> > >>
> > >> I don't quite get what the patch wants to achieve. Why dropping driver
> > >> support for given reset ID is connected with changing the value of
> > >> binding for given reset?
> > >>
> > >> What is the point of this define SRST_A_SECURE_NS_BIU 10?
> > > 
> > > This is about two different reset controllers. The IDs defined here
> > > are used by the operating system to access the correct registers.
> > > The kernel has a LUT from the ID to a register addresses, which is
> > > something you asked for during upstreaming.
> > > 
> > > The ID defined by Corentin is for reset control via SCMI firmware,
> > > which has different number scheme than Linux. To me the suggestion
> > > from Heiko looks sensible (i.e. create a new ID scheme and keep the
> > > current one unchanged).
> > 
> > So the binding is not for Linux but for FW? This should be explained in
> > the commit msg.
> 
> No.
> 
> The current binding describes reset IDs, which are mapped by the
> Linux driver to register offsets in the CRU (clock-reset-unit).
> But accessing the crypto reset line directly from Linux (which
> usually does not run in secure state) will fail. Accessing it
> from correct security context with the current binding is fine
> though. Considering we are sharing the bindings with e.g.
> U-Boot, I suggest to keep the currently defined IDs.
> 
> But Corentin tries to get this running on Linux. For that he
> needs to ask the (SCMI) firmware running in secure state to
> please take care of the reset. The firmware is using different
> reset IDs (apparently the ones used by downstream Linux, which
> are derived from register offset).
> 
> In DT the difference looks like this (check the different phandles):
> 
> #define SRST_A_SECURE_NS_BIU 629
> crypto-old {
>     // existing binding from Linux perspective
>     // reset via direct CRU access
>     // NOTE: permission denied
>     resets = <&cru SRST_A_SECURE_NS_BIU>; 
> };
> 
> #define SCMI_RST_A_SECURE_NS_BIU 10
> crypto-new {
>     // new binding from Linux perspective
>     // reset via SCMI firmware request
>     resets = <&scmi SCMI_RST_A_SECURE_NS_BIU>;
> };
> 
> Instead of introducing SCMI_RST_A_SECURE_NS_BIU, Corentin
> currently just redefines SRST_A_SECURE_NS_BIU. This is quite
> misleading. If somebody does '<&cru SRST_A_SECURE_NS_BIU>'
> with the '10' value for SCMI, it instead resets
> SRST_A_TOP_M300_BIU.
> 
> So my suggestion is to go with the suggestion from Heiko and
> introduce SCMI_RST_A_SECURE_NS_BIU (or something similar).
> That also matches how the SCMI clks on RK3588 and some other
> platforms. See e.g.:
> 
> of include/dt-bindings/clock/rockchip,rk3588-cru.h.
> 
> Greetings,
> 
> -- Sebastian

Thanks for yours suggestions, I will do it that way.

Regards
  

Patch

diff --git a/drivers/clk/rockchip/rst-rk3588.c b/drivers/clk/rockchip/rst-rk3588.c
index e855bb8d5413..6556d9d3c7ab 100644
--- a/drivers/clk/rockchip/rst-rk3588.c
+++ b/drivers/clk/rockchip/rst-rk3588.c
@@ -16,9 +16,6 @@ 
 /* 0xFD7C8000 + 0x0A00 */
 #define RK3588_PHPTOPCRU_RESET_OFFSET(id, reg, bit) [id] = (0x8000*4 + reg * 16 + bit)
 
-/* 0xFD7D0000 + 0x0A00 */
-#define RK3588_SECURECRU_RESET_OFFSET(id, reg, bit) [id] = (0x10000*4 + reg * 16 + bit)
-
 /* 0xFD7F0000 + 0x0A00 */
 #define RK3588_PMU1CRU_RESET_OFFSET(id, reg, bit) [id] = (0x30000*4 + reg * 16 + bit)
 
@@ -806,45 +803,6 @@  static const int rk3588_register_offset[] = {
 	RK3588_PMU1CRU_RESET_OFFSET(SRST_P_PMU0IOC, 5, 4),
 	RK3588_PMU1CRU_RESET_OFFSET(SRST_P_GPIO0, 5, 5),
 	RK3588_PMU1CRU_RESET_OFFSET(SRST_GPIO0, 5, 6),
-
-	/* SECURECRU_SOFTRST_CON00 */
-	RK3588_SECURECRU_RESET_OFFSET(SRST_A_SECURE_NS_BIU, 0, 10),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SECURE_NS_BIU, 0, 11),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_A_SECURE_S_BIU, 0, 12),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SECURE_S_BIU, 0, 13),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_P_SECURE_S_BIU, 0, 14),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_CORE, 0, 15),
-
-	/* SECURECRU_SOFTRST_CON01 */
-	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_PKA, 1, 0),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_CRYPTO_RNG, 1, 1),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_A_CRYPTO, 1, 2),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_H_CRYPTO, 1, 3),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_KEYLADDER_CORE, 1, 9),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_KEYLADDER_RNG, 1, 10),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_A_KEYLADDER, 1, 11),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_H_KEYLADDER, 1, 12),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_P_OTPC_S, 1, 13),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_OTPC_S, 1, 14),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_WDT_S, 1, 15),
-
-	/* SECURECRU_SOFTRST_CON02 */
-	RK3588_SECURECRU_RESET_OFFSET(SRST_T_WDT_S, 2, 0),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_H_BOOTROM, 2, 1),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_A_DCF, 2, 2),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_P_DCF, 2, 3),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_H_BOOTROM_NS, 2, 5),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_P_KEYLADDER, 2, 14),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_H_TRNG_S, 2, 15),
-
-	/* SECURECRU_SOFTRST_CON03 */
-	RK3588_SECURECRU_RESET_OFFSET(SRST_H_TRNG_NS, 3, 0),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_D_SDMMC_BUFFER, 3, 1),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SDMMC, 3, 2),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_H_SDMMC_BUFFER, 3, 3),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_SDMMC, 3, 4),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_P_TRNG_CHK, 3, 5),
-	RK3588_SECURECRU_RESET_OFFSET(SRST_TRNG_S, 3, 6),
 };
 
 void rk3588_rst_init(struct device_node *np, void __iomem *reg_base)
diff --git a/include/dt-bindings/reset/rockchip,rk3588-cru.h b/include/dt-bindings/reset/rockchip,rk3588-cru.h
index d4264db2a07f..c0d08ae78cd5 100644
--- a/include/dt-bindings/reset/rockchip,rk3588-cru.h
+++ b/include/dt-bindings/reset/rockchip,rk3588-cru.h
@@ -716,39 +716,39 @@ 
 #define SRST_P_GPIO0			627
 #define SRST_GPIO0			628
 
-#define SRST_A_SECURE_NS_BIU		629
-#define SRST_H_SECURE_NS_BIU		630
-#define SRST_A_SECURE_S_BIU		631
-#define SRST_H_SECURE_S_BIU		632
-#define SRST_P_SECURE_S_BIU		633
-#define SRST_CRYPTO_CORE		634
-
-#define SRST_CRYPTO_PKA			635
-#define SRST_CRYPTO_RNG			636
-#define SRST_A_CRYPTO			637
-#define SRST_H_CRYPTO			638
-#define SRST_KEYLADDER_CORE		639
-#define SRST_KEYLADDER_RNG		640
-#define SRST_A_KEYLADDER		641
-#define SRST_H_KEYLADDER		642
-#define SRST_P_OTPC_S			643
-#define SRST_OTPC_S			644
-#define SRST_WDT_S			645
-
-#define SRST_T_WDT_S			646
-#define SRST_H_BOOTROM			647
-#define SRST_A_DCF			648
-#define SRST_P_DCF			649
-#define SRST_H_BOOTROM_NS		650
-#define SRST_P_KEYLADDER		651
-#define SRST_H_TRNG_S			652
-
-#define SRST_H_TRNG_NS			653
-#define SRST_D_SDMMC_BUFFER		654
-#define SRST_H_SDMMC			655
-#define SRST_H_SDMMC_BUFFER		656
-#define SRST_SDMMC			657
-#define SRST_P_TRNG_CHK			658
-#define SRST_TRNG_S			659
+#define SRST_A_SECURE_NS_BIU		10
+#define SRST_H_SECURE_NS_BIU		11
+#define SRST_A_SECURE_S_BIU		12
+#define SRST_H_SECURE_S_BIU		13
+#define SRST_P_SECURE_S_BIU		14
+#define SRST_CRYPTO_CORE		15
+
+#define SRST_CRYPTO_PKA			16
+#define SRST_CRYPTO_RNG			17
+#define SRST_A_CRYPTO			18
+#define SRST_H_CRYPTO			19
+#define SRST_KEYLADDER_CORE		25
+#define SRST_KEYLADDER_RNG		26
+#define SRST_A_KEYLADDER		27
+#define SRST_H_KEYLADDER		28
+#define SRST_P_OTPC_S			29
+#define SRST_OTPC_S			30
+#define SRST_WDT_S			31
+
+#define SRST_T_WDT_S			32
+#define SRST_H_BOOTROM			33
+#define SRST_A_DCF			34
+#define SRST_P_DCF			35
+#define SRST_H_BOOTROM_NS		37
+#define SRST_P_KEYLADDER		46
+#define SRST_H_TRNG_S			47
+
+#define SRST_H_TRNG_NS			48
+#define SRST_D_SDMMC_BUFFER		49
+#define SRST_H_SDMMC			50
+#define SRST_H_SDMMC_BUFFER		51
+#define SRST_SDMMC			52
+#define SRST_P_TRNG_CHK			53
+#define SRST_TRNG_S			54
 
 #endif