diff mbox series

[v2,05/13] scsi: fnic: Get copy workqueue count and interrupt mode from config

Message ID 20231027180302.418676-6-kartilak@cisco.com
State New
Headers
Series Introduce support for multiqueue (MQ) in fnic |

Commit Message

Karan Tilak Kumar (kartilak) Oct. 27, 2023, 6:02 p.m. UTC 
  Get the copy workqueue count and interrupt mode from
the configuration. The config can be changed via UCSM.
Add logs to print the interrupt mode and copy workqueue count.
Add logs to print the vNIC resources.

Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
---
 drivers/scsi/fnic/fnic_res.c | 42 ++++++++++++++++++++++++++++++------
 1 file changed, 36 insertions(+), 6 deletions(-)

Comments

Hannes Reinecke Nov. 2, 2023, 7:29 a.m. UTC | #1 
On 10/27/23 20:02, Karan Tilak Kumar wrote:
> Get the copy workqueue count and interrupt mode from
> the configuration. The config can be changed via UCSM.
> Add logs to print the interrupt mode and copy workqueue count.
> Add logs to print the vNIC resources.
> 
> Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
> ---
>   drivers/scsi/fnic/fnic_res.c | 42 ++++++++++++++++++++++++++++++------
>   1 file changed, 36 insertions(+), 6 deletions(-)
> 
Reviewed-by: Hannes Reinecke <hare@suse.de>

Cheers,

Hannes
Karan Tilak Kumar (kartilak) Nov. 6, 2023, 7:59 p.m. UTC | #2 
On Thursday, November 2, 2023 12:30 AM, Hannes Reinecke <hare@suse.de> wrote:
>
> On 10/27/23 20:02, Karan Tilak Kumar wrote:
> > Get the copy workqueue count and interrupt mode from the
> > configuration. The config can be changed via UCSM.
> > Add logs to print the interrupt mode and copy workqueue count.
> > Add logs to print the vNIC resources.
> >
> > Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
> > Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
> > Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
> > ---
> >   drivers/scsi/fnic/fnic_res.c | 42 ++++++++++++++++++++++++++++++------
> >   1 file changed, 36 insertions(+), 6 deletions(-)
> >
> Reviewed-by: Hannes Reinecke <hare@suse.de>
>
> Cheers,
>
> Hannes

Thanks for your review, Hannes.

Regards,
Karan
diff mbox series

Patch

diff --git a/drivers/scsi/fnic/fnic_res.c b/drivers/scsi/fnic/fnic_res.c
index 109316cc4ad9..33dd27f6f24e 100644
--- a/drivers/scsi/fnic/fnic_res.c
+++ b/drivers/scsi/fnic/fnic_res.c
@@ -57,6 +57,8 @@  int fnic_get_vnic_config(struct fnic *fnic)
 	GET_CONFIG(port_down_timeout);
 	GET_CONFIG(port_down_io_retries);
 	GET_CONFIG(luns_per_tgt);
+	GET_CONFIG(intr_mode);
+	GET_CONFIG(wq_copy_count);
 
 	c->wq_enet_desc_count =
 		min_t(u32, VNIC_FNIC_WQ_DESCS_MAX,
@@ -131,6 +133,12 @@  int fnic_get_vnic_config(struct fnic *fnic)
 	c->intr_timer = min_t(u16, VNIC_INTR_TIMER_MAX, c->intr_timer);
 	c->intr_timer_type = c->intr_timer_type;
 
+	/* for older firmware, GET_CONFIG will not return anything */
+	if (c->wq_copy_count == 0)
+		c->wq_copy_count = 1;
+
+	c->wq_copy_count = min_t(u16, FNIC_WQ_COPY_MAX, c->wq_copy_count);
+
 	shost_printk(KERN_INFO, fnic->lport->host,
 		     "vNIC MAC addr %pM "
 		     "wq/wq_copy/rq %d/%d/%d\n",
@@ -161,6 +169,10 @@  int fnic_get_vnic_config(struct fnic *fnic)
 	shost_printk(KERN_INFO, fnic->lport->host,
 		     "vNIC port dn io retries %d port dn timeout %d\n",
 		     c->port_down_io_retries, c->port_down_timeout);
+	shost_printk(KERN_INFO, fnic->lport->host,
+			"vNIC wq_copy_count: %d\n", c->wq_copy_count);
+	shost_printk(KERN_INFO, fnic->lport->host,
+			"vNIC intr mode: %d\n", c->intr_mode);
 
 	return 0;
 }
@@ -187,12 +199,25 @@  int fnic_set_nic_config(struct fnic *fnic, u8 rss_default_cpu,
 void fnic_get_res_counts(struct fnic *fnic)
 {
 	fnic->wq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_WQ);
-	fnic->raw_wq_count = fnic->wq_count - 1;
-	fnic->wq_copy_count = fnic->wq_count - fnic->raw_wq_count;
+	fnic->raw_wq_count = 1;
+	fnic->wq_copy_count = fnic->config.wq_copy_count;
 	fnic->rq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_RQ);
 	fnic->cq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_CQ);
 	fnic->intr_count = vnic_dev_get_res_count(fnic->vdev,
 		RES_TYPE_INTR_CTRL);
+
+	shost_printk(KERN_INFO, fnic->lport->host,
+		"vNIC fw resources wq_count: %d\n", fnic->wq_count);
+	shost_printk(KERN_INFO, fnic->lport->host,
+		"vNIC fw resources raw_wq_count: %d\n", fnic->raw_wq_count);
+	shost_printk(KERN_INFO, fnic->lport->host,
+		"vNIC fw resources wq_copy_count: %d\n", fnic->wq_copy_count);
+	shost_printk(KERN_INFO, fnic->lport->host,
+		"vNIC fw resources rq_count: %d\n", fnic->rq_count);
+	shost_printk(KERN_INFO, fnic->lport->host,
+		"vNIC fw resources cq_count: %d\n", fnic->cq_count);
+	shost_printk(KERN_INFO, fnic->lport->host,
+		"vNIC fw resources intr_count: %d\n", fnic->intr_count);
 }
 
 void fnic_free_vnic_resources(struct fnic *fnic)
@@ -234,10 +259,15 @@  int fnic_alloc_vnic_resources(struct fnic *fnic)
 		     intr_mode == VNIC_DEV_INTR_MODE_MSIX ?
 		     "MSI-X" : "unknown");
 
-	shost_printk(KERN_INFO, fnic->lport->host, "vNIC resources avail: "
-		     "wq %d cp_wq %d raw_wq %d rq %d cq %d intr %d\n",
-		     fnic->wq_count, fnic->wq_copy_count, fnic->raw_wq_count,
-		     fnic->rq_count, fnic->cq_count, fnic->intr_count);
+	shost_printk(KERN_INFO, fnic->lport->host,
+			"vNIC resources avail: wq %d cp_wq %d raw_wq %d rq %d",
+			fnic->wq_count, fnic->wq_copy_count,
+			fnic->raw_wq_count, fnic->rq_count);
+
+	shost_printk(KERN_INFO, fnic->lport->host,
+			"vNIC resources avail: cq %d intr %d cpy-wq desc count %d\n",
+			fnic->cq_count, fnic->intr_count,
+			fnic->config.wq_copy_desc_count);
 
 	/* Allocate Raw WQ used for FCS frames */
 	for (i = 0; i < fnic->raw_wq_count; i++) {