diff mbox series

[v5,1/2] dt-bindings: rtc: max31335: add max31335 bindings

Message ID 20231103140051.43174-1-antoniu.miclaus@analog.com
State New
Headers
Series [v5,1/2] dt-bindings: rtc: max31335: add max31335 bindings |

Commit Message

Antoniu Miclaus Nov. 3, 2023, 2 p.m. UTC 
  Document the Analog Devices MAX31335 device tree bindings.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
changes in v5:
 - add `adi,tc-diode` property.
 .../devicetree/bindings/rtc/adi,max31335.yaml | 69 +++++++++++++++++++
 1 file changed, 69 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/adi,max31335.yaml

Comments

Alexandre Belloni Nov. 3, 2023, 3:23 p.m. UTC | #1 
On 03/11/2023 16:00:25+0200, Antoniu Miclaus wrote:
> +  trickle-resistor-ohms:
> +    description:
> +      Selected resistor for trickle charger. Should be specified if trickle
> +      charger should be enabled.
> +    enum: [3000, 6000, 11000]
> +
> +required:
> +  - compatible
> +  - reg
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        rtc@68 {
> +            compatible = "adi,max31335";
> +            reg = <0x68>;
> +            pinctrl-0 = <&rtc_nint_pins>;
> +            interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
> +            trickle-resistor-ohms = <6000>;

This example would need aux-voltage-chargeable to ensure the charger is
getting enabled

> +            adi,tc-diode = "schottky";
> +        };
> +    };
> +...
> -- 
> 2.42.0
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/rtc/adi,max31335.yaml b/Documentation/devicetree/bindings/rtc/adi,max31335.yaml
new file mode 100644
index 000000000000..b82a8aa67428
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/adi,max31335.yaml
@@ -0,0 +1,69 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/adi,max31335.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX31335 RTC
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description:
+  Analog Devices MAX31335 I2C RTC ±2ppm Automotive Real-Time Clock with
+  Integrated MEMS Resonator.
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: adi,max31335
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#clock-cells":
+    description:
+      RTC can be used as a clock source through its clock output pin.
+    const: 0
+
+  adi,tc-diode:
+    description:
+      Select the diode configuration for the trickle charger.
+      schottky - Schottky diode in series.
+      standard+schottky - standard diode + Schottky diode in series.
+    enum: [schottky, standard+schottky]
+
+  trickle-resistor-ohms:
+    description:
+      Selected resistor for trickle charger. Should be specified if trickle
+      charger should be enabled.
+    enum: [3000, 6000, 11000]
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@68 {
+            compatible = "adi,max31335";
+            reg = <0x68>;
+            pinctrl-0 = <&rtc_nint_pins>;
+            interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
+            trickle-resistor-ohms = <6000>;
+            adi,tc-diode = "schottky";
+        };
+    };
+...