[21/39] PCI/MSI: Move pci_enable_msix_range() to api.c
Commit Message
From: Ahmed S. Darwish <darwi@linutronix.de>
To distangle the maze in msi.c, all exported device-driver MSI APIs are
now to be grouped in one file, api.c.
Move pci_enable_msix_range() and make its kernel-doc comprehensive.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
drivers/pci/msi/api.c | 32 ++++++++++++++++++++++++++++++++
drivers/pci/msi/msi.c | 30 ++++--------------------------
drivers/pci/msi/msi.h | 3 +++
3 files changed, 39 insertions(+), 26 deletions(-)
---
Comments
On Fri, Nov 11, 2022 at 02:54:48PM +0100, Thomas Gleixner wrote:
> From: Ahmed S. Darwish <darwi@linutronix.de>
>
> To distangle the maze in msi.c, all exported device-driver MSI APIs are
> now to be grouped in one file, api.c.
>
> Move pci_enable_msix_range() and make its kernel-doc comprehensive.
>
> Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
> ---
> drivers/pci/msi/api.c | 32 ++++++++++++++++++++++++++++++++
> drivers/pci/msi/msi.c | 30 ++++--------------------------
> drivers/pci/msi/msi.h | 3 +++
> 3 files changed, 39 insertions(+), 26 deletions(-)
> ---
> diff --git a/drivers/pci/msi/api.c b/drivers/pci/msi/api.c
> index 63d7f8f6a284..d48050555d55 100644
> --- a/drivers/pci/msi/api.c
> +++ b/drivers/pci/msi/api.c
> @@ -58,3 +58,35 @@ void pci_disable_msi(struct pci_dev *dev)
> msi_unlock_descs(&dev->dev);
> }
> EXPORT_SYMBOL(pci_disable_msi);
> +
> +/**
> + * pci_enable_msix_range() - Enable MSI-X interrupt mode on device
> + * @dev: the PCI device to operate on
> + * @entries: input/output parameter, array of MSI-X configuration entries
> + * @minvec: minimum required number of MSI-X vectors
> + * @maxvec: maximum desired number of MSI-X vectors
> + *
> + * Legacy device driver API to enable MSI-X interrupt mode on device and
> + * configure its MSI-X capability structure as appropriate. The passed
> + * @entries array must have each of its members "entry" field set to a
> + * desired (valid) MSI-X vector number, where the range of valid MSI-X
> + * vector numbers can be queried through pci_msix_vec_count(). If
> + * successful, the driver must invoke pci_disable_msix() on cleanup.
> + *
> + * NOTE: The newer pci_alloc_irq_vectors() / pci_free_irq_vectors() API
> + * pair should, in general, be used instead.
> + *
> + * Return: number of MSI-X vectors allocated (which might be smaller
> + * than @maxvecs), where Linux IRQ numbers for such allocated vectors
> + * are saved back in the @entries array elements' "vector" field. Return
> + * -ENOSPC if less than @minvecs interrupt vectors are available.
> + * Return -EINVAL if one of the passed @entries members "entry" field
> + * was invalid or a duplicate, or if plain MSI interrupts mode was
> + * earlier enabled on device. Return other errnos otherwise.
> + */
> +int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries,
> + int minvec, int maxvec)
> +{
> + return __pci_enable_msix_range(dev, entries, minvec, maxvec, NULL, 0);
> +}
> +EXPORT_SYMBOL(pci_enable_msix_range);
> diff --git a/drivers/pci/msi/msi.c b/drivers/pci/msi/msi.c
> index 98f07ad9af62..6700ef1c734e 100644
> --- a/drivers/pci/msi/msi.c
> +++ b/drivers/pci/msi/msi.c
> @@ -844,10 +844,10 @@ int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec,
> }
> }
>
> -static int __pci_enable_msix_range(struct pci_dev *dev,
> - struct msix_entry *entries, int minvec,
> - int maxvec, struct irq_affinity *affd,
> - int flags)
> +int __pci_enable_msix_range(struct pci_dev *dev,
> + struct msix_entry *entries, int minvec,
> + int maxvec, struct irq_affinity *affd,
> + int flags)
> {
> int rc, nvec = maxvec;
>
> @@ -887,28 +887,6 @@ static int __pci_enable_msix_range(struct pci_dev *dev,
> }
>
> /**
> - * pci_enable_msix_range - configure device's MSI-X capability structure
> - * @dev: pointer to the pci_dev data structure of MSI-X device function
> - * @entries: pointer to an array of MSI-X entries
> - * @minvec: minimum number of MSI-X IRQs requested
> - * @maxvec: maximum number of MSI-X IRQs requested
> - *
> - * Setup the MSI-X capability structure of device function with a maximum
> - * possible number of interrupts in the range between @minvec and @maxvec
> - * upon its software driver call to request for MSI-X mode enabled on its
> - * hardware device function. It returns a negative errno if an error occurs.
> - * If it succeeds, it returns the actual number of interrupts allocated and
> - * indicates the successful configuration of MSI-X capability structure
> - * with new allocated MSI-X interrupts.
> - **/
> -int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries,
> - int minvec, int maxvec)
> -{
> - return __pci_enable_msix_range(dev, entries, minvec, maxvec, NULL, 0);
> -}
> -EXPORT_SYMBOL(pci_enable_msix_range);
> -
> -/**
> * pci_alloc_irq_vectors_affinity - allocate multiple IRQs for a device
> * @dev: PCI device to operate on
> * @min_vecs: minimum number of vectors required (must be >= 1)
> diff --git a/drivers/pci/msi/msi.h b/drivers/pci/msi/msi.h
> index 00bb98d5bb0e..8c4a5289432d 100644
> --- a/drivers/pci/msi/msi.h
> +++ b/drivers/pci/msi/msi.h
> @@ -88,8 +88,11 @@ static inline __attribute_const__ u32 msi_multi_mask(struct msi_desc *desc)
> void pci_msi_shutdown(struct pci_dev *dev);
> void pci_free_msi_irqs(struct pci_dev *dev);
> int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec, struct irq_affinity *affd);
> +int __pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, int minvec,
> + int maxvec, struct irq_affinity *affd, int flags);
>
> /* Legacy (!IRQDOMAIN) fallbacks */
> +
> #ifdef CONFIG_PCI_MSI_ARCH_FALLBACKS
> int pci_msi_legacy_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
> void pci_msi_legacy_teardown_msi_irqs(struct pci_dev *dev);
>
@@ -58,3 +58,35 @@ void pci_disable_msi(struct pci_dev *dev)
msi_unlock_descs(&dev->dev);
}
EXPORT_SYMBOL(pci_disable_msi);
+
+/**
+ * pci_enable_msix_range() - Enable MSI-X interrupt mode on device
+ * @dev: the PCI device to operate on
+ * @entries: input/output parameter, array of MSI-X configuration entries
+ * @minvec: minimum required number of MSI-X vectors
+ * @maxvec: maximum desired number of MSI-X vectors
+ *
+ * Legacy device driver API to enable MSI-X interrupt mode on device and
+ * configure its MSI-X capability structure as appropriate. The passed
+ * @entries array must have each of its members "entry" field set to a
+ * desired (valid) MSI-X vector number, where the range of valid MSI-X
+ * vector numbers can be queried through pci_msix_vec_count(). If
+ * successful, the driver must invoke pci_disable_msix() on cleanup.
+ *
+ * NOTE: The newer pci_alloc_irq_vectors() / pci_free_irq_vectors() API
+ * pair should, in general, be used instead.
+ *
+ * Return: number of MSI-X vectors allocated (which might be smaller
+ * than @maxvecs), where Linux IRQ numbers for such allocated vectors
+ * are saved back in the @entries array elements' "vector" field. Return
+ * -ENOSPC if less than @minvecs interrupt vectors are available.
+ * Return -EINVAL if one of the passed @entries members "entry" field
+ * was invalid or a duplicate, or if plain MSI interrupts mode was
+ * earlier enabled on device. Return other errnos otherwise.
+ */
+int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries,
+ int minvec, int maxvec)
+{
+ return __pci_enable_msix_range(dev, entries, minvec, maxvec, NULL, 0);
+}
+EXPORT_SYMBOL(pci_enable_msix_range);
@@ -844,10 +844,10 @@ int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec,
}
}
-static int __pci_enable_msix_range(struct pci_dev *dev,
- struct msix_entry *entries, int minvec,
- int maxvec, struct irq_affinity *affd,
- int flags)
+int __pci_enable_msix_range(struct pci_dev *dev,
+ struct msix_entry *entries, int minvec,
+ int maxvec, struct irq_affinity *affd,
+ int flags)
{
int rc, nvec = maxvec;
@@ -887,28 +887,6 @@ static int __pci_enable_msix_range(struct pci_dev *dev,
}
/**
- * pci_enable_msix_range - configure device's MSI-X capability structure
- * @dev: pointer to the pci_dev data structure of MSI-X device function
- * @entries: pointer to an array of MSI-X entries
- * @minvec: minimum number of MSI-X IRQs requested
- * @maxvec: maximum number of MSI-X IRQs requested
- *
- * Setup the MSI-X capability structure of device function with a maximum
- * possible number of interrupts in the range between @minvec and @maxvec
- * upon its software driver call to request for MSI-X mode enabled on its
- * hardware device function. It returns a negative errno if an error occurs.
- * If it succeeds, it returns the actual number of interrupts allocated and
- * indicates the successful configuration of MSI-X capability structure
- * with new allocated MSI-X interrupts.
- **/
-int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries,
- int minvec, int maxvec)
-{
- return __pci_enable_msix_range(dev, entries, minvec, maxvec, NULL, 0);
-}
-EXPORT_SYMBOL(pci_enable_msix_range);
-
-/**
* pci_alloc_irq_vectors_affinity - allocate multiple IRQs for a device
* @dev: PCI device to operate on
* @min_vecs: minimum number of vectors required (must be >= 1)
@@ -88,8 +88,11 @@ static inline __attribute_const__ u32 msi_multi_mask(struct msi_desc *desc)
void pci_msi_shutdown(struct pci_dev *dev);
void pci_free_msi_irqs(struct pci_dev *dev);
int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec, struct irq_affinity *affd);
+int __pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, int minvec,
+ int maxvec, struct irq_affinity *affd, int flags);
/* Legacy (!IRQDOMAIN) fallbacks */
+
#ifdef CONFIG_PCI_MSI_ARCH_FALLBACKS
int pci_msi_legacy_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
void pci_msi_legacy_teardown_msi_irqs(struct pci_dev *dev);