[7/8] arm64: dts: qcom: msm8953: Add device tree for Xiaomi Redmi 5 Plus
Commit Message
From: Eugene Lepshy <fekz115@gmail.com>
Add device tree for the Xiaomi Redmi 5 Plus (vince) smartphone. This
device is based on Snapdragon 625 (msm8953) SoC.
Signed-off-by: Eugene Lepshy <fekz115@gmail.com>
Co-developed-by: Gianluca Boiano <morf3089@gmail.com>
Signed-off-by: Gianluca Boiano <morf3089@gmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/msm8953-xiaomi-vince.dts | 330 ++++++++++++++++++
2 files changed, 331 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
Comments
On 16/11/2022 15:56, Luca Weiss wrote:
> From: Eugene Lepshy <fekz115@gmail.com>
>
> Add device tree for the Xiaomi Redmi 5 Plus (vince) smartphone. This
> device is based on Snapdragon 625 (msm8953) SoC.
>
> Signed-off-by: Eugene Lepshy <fekz115@gmail.com>
> Co-developed-by: Gianluca Boiano <morf3089@gmail.com>
> Signed-off-by: Gianluca Boiano <morf3089@gmail.com>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/msm8953-xiaomi-vince.dts | 330 ++++++++++++++++++
> 2 files changed, 331 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 9517638b2fdd..bed490c095dd 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -25,6 +25,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-tissot.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-vince.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb
> diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
> new file mode 100644
> index 000000000000..da029aaa99a1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
> @@ -0,0 +1,330 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/dts-v1/;
> +
> +#include "msm8953.dtsi"
> +#include "pm8953.dtsi"
> +#include "pmi8950.dtsi"
> +#include <dt-bindings/leds/common.h>
> +
> +/ {
> + model = "Xiaomi Redmi 5 Plus";
> + compatible = "xiaomi,vince", "qcom,msm8953";
> + chassis-type = "handset";
> + qcom,msm-id = <293 0>;
> + qcom,board-id= <0x1000b 0x08>;
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpio_key_default>;
> +
> + key-volume-up {
> + label = "volume_up";
> + linux,code = <KEY_VOLUMEUP>;
> + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + reserved-memory {
> + /delete-node/ memory@85b00000;
> + memory@84a00000 {
> + reg = <0x0 0x84a00000 0x0 0x1900000>;
> + no-map;
> + };
> +
> + cont_splash_mem: memory@90001000 {
> + reg = <0x0 0x90001000 0x0 (1080 * 2160 * 3)>;
> + no-map;
> + };
> +
> + /delete-node/ memory@8d600000;
> + adsp_fw_mem: memory@8d600000 {
> + reg = <0x0 0x8d600000 0x0 0x1200000>;
> + no-map;
> + };
> +
> + /delete-node/ memory@8e700000;
> + wcnss_fw_mem: memory@8e800000 {
> + reg = <0x0 0x8e800000 0x0 0x700000>;
> + no-map;
> + };
> +
> + ramoops@9ff00000 {
> + compatible = "ramoops";
> + reg = <0x0 0x9ff00000 0x0 0x100000>;
> + record-size = <0x1000>;
> + console-size = <0x80000>;
> + ftrace-size = <0x1000>;
> + pmsg-size = <0x8000>;
> + };
> + };
> +
> + i2c-gpio {
> + compatible = "i2c-gpio";
> + sda-gpios = <&tlmm 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> + scl-gpios = <&tlmm 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> + i2c-gpio,delay-us = <2>; /* ~100 kHz */
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + imu@6a {
> + compatible = "st,lsm6dsl";
> + reg = <0x6a>;
> + vdd-supply = <&pm8953_l10>;
> + vddio-supply = <&pm8953_l6>;
> + mount-matrix = "1", "0", "0",
> + "0", "-1", "0",
> + "0", "0", "1";
> + };
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
> +
> +&hsusb_phy {
> + vdd-supply = <&pm8953_l3>;
> + vdda-pll-supply = <&pm8953_l7>;
> + vdda-phy-dpdm-supply = <&pm8953_l13>;
> +
> + status = "okay";
> +};
> +
> +&i2c_2 {
> + status = "okay";
> +
> + led-controller@45 {
> + compatible = "awinic,aw2013";
> + reg = <0x45>;
> +
> + vcc-supply = <&pm8953_l10>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led@0 {
> + reg = <0>;
> + led-max-microamp = <5000>;
> + function = LED_FUNCTION_INDICATOR;
> + color = <LED_COLOR_ID_WHITE>;
> + };
> + };
> +};
> +
> +&i2c_3 {
> + status = "okay";
> +
> + touchscreen@20 {
> + reg = <0x20>;
> + compatible = "syna,rmi4-i2c";
> + interrupts-parent = <&tlmm>;
> + interrupts-extended = <&tlmm 65 IRQ_TYPE_EDGE_FALLING>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + vdd-supply = <&pm8953_l10>;
> + vio-supply = <&pm8953_l6>;
> +
> + pinctrl-names = "init", "suspend";
> + pinctrl-0 = <&ts_reset_active &ts_int_active>;
> + pinctrl-1 = <&ts_reset_suspend &ts_int_suspend>;
> + syna,reset-delay-ms = <200>;
> + syna,startup-delay-ms = <500>;
> +
> + rmi4-f01@1 {
> + reg = <0x01>;
> + syna,nosleep-mode = <1>;
> + };
> +
> + rmi4-f12@12 {
> + reg = <0x12>;
> + syna,rezero-wait-ms = <20>;
> + syna,sensor-type = <1>;
> + touchscreen-x-mm = <68>;
> + touchscreen-y-mm = <122>;
> + };
> + };
> +};
> +
> +&pm8953_resin {
> + linux,code = <KEY_VOLUMEDOWN>;
> + status = "okay";
> +};
> +
> +&pmi8950_wled {
> + qcom,current-limit-microamp = <20000>;
> + qcom,ovp-millivolt = <29600>;
> + qcom,num-strings = <2>;
> + qcom,external-pfet;
> + qcom,cabc;
> +
> + status = "okay";
> +};
> +
> +&rpm_requests {
> + regulators {
> + compatible = "qcom,rpm-pm8953-regulators";
> + vdd_s1-supply = <&vph_pwr>;
> + vdd_s2-supply = <&vph_pwr>;
> + vdd_s3-supply = <&vph_pwr>;
> + vdd_s4-supply = <&vph_pwr>;
> + vdd_s5-supply = <&vph_pwr>;
> + vdd_s6-supply = <&vph_pwr>;
> + vdd_s7-supply = <&vph_pwr>;
> + vdd_l1-supply = <&pm8953_s3>;
> + vdd_l2_l3-supply = <&pm8953_s3>;
> + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
> + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
> + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
> +
> + pm8953_s1: s1 {
> + regulator-min-microvolt = <870000>;
> + regulator-max-microvolt = <1156000>;
> + };
> +
> + pm8953_s3: s3 {
> + regulator-min-microvolt = <984000>;
> + regulator-max-microvolt = <1224000>;
> + };
Please add a newline after each node.
(+delete nodes by referencing their label, check licensing and check if
i2c-gpio is necessary as in the rest of the patches)
Konrad
> + pm8953_s4: s4 {
> + regulator-min-microvolt = <1900000>;
> + regulator-max-microvolt = <2050000>;
> + };
> + pm8953_l1: l1 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1100000>;
> + };
> + pm8953_l2: l2 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1225000>;
> + };
> + pm8953_l3: l3 {
> + regulator-min-microvolt = <925000>;
> + regulator-max-microvolt = <925000>;
> + };
> + pm8953_l5: l5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + pm8953_l6: l6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + pm8953_l7: l7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1900000>;
> + };
> + pm8953_l8: l8 {
> + regulator-min-microvolt = <2900000>;
> + regulator-max-microvolt = <2900000>;
> + };
> + pm8953_l9: l9 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + pm8953_l10: l10 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + };
> + pm8953_l11: l11 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> + };
> + pm8953_l12: l12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + };
> + pm8953_l13: l13 {
> + regulator-min-microvolt = <3125000>;
> + regulator-max-microvolt = <3125000>;
> + };
> + pm8953_l16: l16 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + pm8953_l17: l17 {
> + regulator-min-microvolt = <2750000>;
> + regulator-max-microvolt = <2850000>;
> + };
> + pm8953_l19: l19 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1380000>;
> + };
> + pm8953_l22: l22 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> + pm8953_l23: l23 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1225000>;
> + };
> + };
> +};
> +
> +&sdhc_1 {
> + status = "okay";
> +};
> +
> +&sdhc_2 {
> + vmmc-supply = <&pm8953_l11>;
> + vqmmc-supply = <&pm8953_l12>;
> +
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
> + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
> +
> + status = "okay";
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <0 4>, <16 4>, <135 4>;
> +
> + ts_reset_active: ts-reset-active-state {
> + pins = "gpio64";
> + function = "gpio";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> +
> + ts_reset_suspend: ts-reset-suspend-state {
> + pins = "gpio64";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + ts_int_active: ts-int-active-state {
> + pins = "gpio65";
> + function = "gpio";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> +
> + ts_int_suspend: ts-int-suspend-state {
> + pins = "gpio65";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +};
> +
> +&uart_0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart_console_active>;
> +
> + status = "okay";
> +};
> +
> +&usb3 {
> + status = "okay";
> +};
> +
> +&usb3_dwc3 {
> + dr_mode = "peripheral";
> +};
@@ -25,6 +25,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-tissot.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-vince.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb
new file mode 100644
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Xiaomi Redmi 5 Plus";
+ compatible = "xiaomi,vince", "qcom,msm8953";
+ chassis-type = "handset";
+ qcom,msm-id = <293 0>;
+ qcom,board-id= <0x1000b 0x08>;
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_key_default>;
+
+ key-volume-up {
+ label = "volume_up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reserved-memory {
+ /delete-node/ memory@85b00000;
+ memory@84a00000 {
+ reg = <0x0 0x84a00000 0x0 0x1900000>;
+ no-map;
+ };
+
+ cont_splash_mem: memory@90001000 {
+ reg = <0x0 0x90001000 0x0 (1080 * 2160 * 3)>;
+ no-map;
+ };
+
+ /delete-node/ memory@8d600000;
+ adsp_fw_mem: memory@8d600000 {
+ reg = <0x0 0x8d600000 0x0 0x1200000>;
+ no-map;
+ };
+
+ /delete-node/ memory@8e700000;
+ wcnss_fw_mem: memory@8e800000 {
+ reg = <0x0 0x8e800000 0x0 0x700000>;
+ no-map;
+ };
+
+ ramoops@9ff00000 {
+ compatible = "ramoops";
+ reg = <0x0 0x9ff00000 0x0 0x100000>;
+ record-size = <0x1000>;
+ console-size = <0x80000>;
+ ftrace-size = <0x1000>;
+ pmsg-size = <0x8000>;
+ };
+ };
+
+ i2c-gpio {
+ compatible = "i2c-gpio";
+ sda-gpios = <&tlmm 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imu@6a {
+ compatible = "st,lsm6dsl";
+ reg = <0x6a>;
+ vdd-supply = <&pm8953_l10>;
+ vddio-supply = <&pm8953_l6>;
+ mount-matrix = "1", "0", "0",
+ "0", "-1", "0",
+ "0", "0", "1";
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&hsusb_phy {
+ vdd-supply = <&pm8953_l3>;
+ vdda-pll-supply = <&pm8953_l7>;
+ vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+ status = "okay";
+};
+
+&i2c_2 {
+ status = "okay";
+
+ led-controller@45 {
+ compatible = "awinic,aw2013";
+ reg = <0x45>;
+
+ vcc-supply = <&pm8953_l10>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ led-max-microamp = <5000>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_WHITE>;
+ };
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+
+ touchscreen@20 {
+ reg = <0x20>;
+ compatible = "syna,rmi4-i2c";
+ interrupts-parent = <&tlmm>;
+ interrupts-extended = <&tlmm 65 IRQ_TYPE_EDGE_FALLING>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd-supply = <&pm8953_l10>;
+ vio-supply = <&pm8953_l6>;
+
+ pinctrl-names = "init", "suspend";
+ pinctrl-0 = <&ts_reset_active &ts_int_active>;
+ pinctrl-1 = <&ts_reset_suspend &ts_int_suspend>;
+ syna,reset-delay-ms = <200>;
+ syna,startup-delay-ms = <500>;
+
+ rmi4-f01@1 {
+ reg = <0x01>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,rezero-wait-ms = <20>;
+ syna,sensor-type = <1>;
+ touchscreen-x-mm = <68>;
+ touchscreen-y-mm = <122>;
+ };
+ };
+};
+
+&pm8953_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pmi8950_wled {
+ qcom,current-limit-microamp = <20000>;
+ qcom,ovp-millivolt = <29600>;
+ qcom,num-strings = <2>;
+ qcom,external-pfet;
+ qcom,cabc;
+
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8953-regulators";
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_s7-supply = <&vph_pwr>;
+ vdd_l1-supply = <&pm8953_s3>;
+ vdd_l2_l3-supply = <&pm8953_s3>;
+ vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+ vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+ vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+ pm8953_s1: s1 {
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <1156000>;
+ };
+
+ pm8953_s3: s3 {
+ regulator-min-microvolt = <984000>;
+ regulator-max-microvolt = <1224000>;
+ };
+ pm8953_s4: s4 {
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <2050000>;
+ };
+ pm8953_l1: l1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1100000>;
+ };
+ pm8953_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1225000>;
+ };
+ pm8953_l3: l3 {
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <925000>;
+ };
+ pm8953_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8953_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8953_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1900000>;
+ };
+ pm8953_l8: l8 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ };
+ pm8953_l9: l9 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ pm8953_l10: l10 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+ pm8953_l11: l11 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ pm8953_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ pm8953_l13: l13 {
+ regulator-min-microvolt = <3125000>;
+ regulator-max-microvolt = <3125000>;
+ };
+ pm8953_l16: l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8953_l17: l17 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2850000>;
+ };
+ pm8953_l19: l19 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1380000>;
+ };
+ pm8953_l22: l22 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ pm8953_l23: l23 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1225000>;
+ };
+ };
+};
+
+&sdhc_1 {
+ status = "okay";
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8953_l11>;
+ vqmmc-supply = <&pm8953_l12>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <16 4>, <135 4>;
+
+ ts_reset_active: ts-reset-active-state {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ ts_reset_suspend: ts-reset-suspend-state {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ ts_int_active: ts-int-active-state {
+ pins = "gpio65";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ ts_int_suspend: ts-int-suspend-state {
+ pins = "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+};
+
+&uart_0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart_console_active>;
+
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb3_dwc3 {
+ dr_mode = "peripheral";
+};