arm64: boot: dts: ti: k3-am62a-main: Fix GPIO pin count in DT nodes.

Message ID 20231025110252.1089979-1-n-yadav@ti.com
State New
Headers
Series arm64: boot: dts: ti: k3-am62a-main: Fix GPIO pin count in DT nodes. |

Commit Message

Nitin Yadav Oct. 25, 2023, 11:02 a.m. UTC
  Fix number of gpio pins in main_gpio0 & main_gpio1 DT nodes according
to AM62a SK datasheet. The Link of datasheet is in the following line:

https://www.ti.com/lit/gpn/am62a3

Section: 6.3.10 GPIO (Page No. 52-55)

Fixes: '5fc6b1b62639c ("arm64: dts: ti: Introduce AM62A7 family of SoCs")'

Signed-off-by: Nitin Yadav <n-yadav@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
  

Comments

Krzysztof Kozlowski Oct. 25, 2023, 12:43 p.m. UTC | #1
On 25/10/2023 13:02, Nitin Yadav wrote:
> Fix number of gpio pins in main_gpio0 & main_gpio1 DT nodes according
> to AM62a SK datasheet. The Link of datasheet is in the following line:
> 
> https://www.ti.com/lit/gpn/am62a3
> 
> Section: 6.3.10 GPIO (Page No. 52-55)
> 
> Fixes: '5fc6b1b62639c ("arm64: dts: ti: Introduce AM62A7 family of SoCs")'
> 

No line breaks between tags.

Best regards,
Krzysztof
  
Nishanth Menon Oct. 25, 2023, 3:57 p.m. UTC | #2
On 16:32-20231025, Nitin Yadav wrote:
> Fix number of gpio pins in main_gpio0 & main_gpio1 DT nodes according
> to AM62a SK datasheet. The Link of datasheet is in the following line:

SK? line?

Please rephrase above and just mention the section of the data sheet to
refer to.

> 
> https://www.ti.com/lit/gpn/am62a3
> 
> Section: 6.3.10 GPIO (Page No. 52-55)

> 
> Fixes: '5fc6b1b62639c ("arm64: dts: ti: Introduce AM62A7 family of SoCs")'

What is the single quote for?
Also note the additional comment in the list to drop the extra EoL.


Did you check the MCU and WKUP GPIO count as well? if there are bugs
around it, fix it in a single commit please.

> 
> Signed-off-by: Nitin Yadav <n-yadav@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
> index 3198af08fb9f..de36abb243f1 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
> @@ -462,7 +462,7 @@ main_gpio0: gpio@600000 {
>  			     <193>, <194>, <195>;
>  		interrupt-controller;
>  		#interrupt-cells = <2>;
> -		ti,ngpio = <87>;
> +		ti,ngpio = <92>;
>  		ti,davinci-gpio-unbanked = <0>;
>  		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
>  		clocks = <&k3_clks 77 0>;
> @@ -480,7 +480,7 @@ main_gpio1: gpio@601000 {
>  			     <183>, <184>, <185>;
>  		interrupt-controller;
>  		#interrupt-cells = <2>;
> -		ti,ngpio = <88>;
> +		ti,ngpio = <52>;
>  		ti,davinci-gpio-unbanked = <0>;
>  		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
>  		clocks = <&k3_clks 78 0>;
> -- 
> 2.25.1
>
  
Nitin Yadav Oct. 26, 2023, 6:47 a.m. UTC | #3
On 25/10/23 21:27, Nishanth Menon wrote:
> On 16:32-20231025, Nitin Yadav wrote:
>> Fix number of gpio pins in main_gpio0 & main_gpio1 DT nodes according
>> to AM62a SK datasheet. The Link of datasheet is in the following line:
> 
> SK? line?
> 
> Please rephrase above and just mention the section of the data sheet to
> refer to.
> 
>>
>> https://www.ti.com/lit/gpn/am62a3
>>
>> Section: 6.3.10 GPIO (Page No. 52-55)
> 
>>
>> Fixes: '5fc6b1b62639c ("arm64: dts: ti: Introduce AM62A7 family of SoCs")'
> 
> What is the single quote for?
> Also note the additional comment in the list to drop the extra EoL.
> 
> 
> Did you check the MCU and WKUP GPIO count as well? if there are bugs
> around it, fix it in a single commit please.
yes, checked they are good.
> 
>>
>> Signed-off-by: Nitin Yadav <n-yadav@ti.com>
>> ---
>>  arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
>> index 3198af08fb9f..de36abb243f1 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
>> @@ -462,7 +462,7 @@ main_gpio0: gpio@600000 {
>>  			     <193>, <194>, <195>;
>>  		interrupt-controller;
>>  		#interrupt-cells = <2>;
>> -		ti,ngpio = <87>;
>> +		ti,ngpio = <92>;
>>  		ti,davinci-gpio-unbanked = <0>;
>>  		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
>>  		clocks = <&k3_clks 77 0>;
>> @@ -480,7 +480,7 @@ main_gpio1: gpio@601000 {
>>  			     <183>, <184>, <185>;
>>  		interrupt-controller;
>>  		#interrupt-cells = <2>;
>> -		ti,ngpio = <88>;
>> +		ti,ngpio = <52>;
>>  		ti,davinci-gpio-unbanked = <0>;
>>  		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
>>  		clocks = <&k3_clks 78 0>;
>> -- 
>> 2.25.1
>>
>
  
Nishanth Menon Oct. 26, 2023, 11:35 a.m. UTC | #4
On 12:17-20231026, Nitin Yadav wrote:
> On 25/10/23 21:27, Nishanth Menon wrote:
> > On 16:32-20231025, Nitin Yadav wrote:
> >> Fix number of gpio pins in main_gpio0 & main_gpio1 DT nodes according
> >> to AM62a SK datasheet. The Link of datasheet is in the following line:
> > 
> > SK? line?
> > 
> > Please rephrase above and just mention the section of the data sheet to
> > refer to.
> > 
> >>
> >> https://www.ti.com/lit/gpn/am62a3
> >>
> >> Section: 6.3.10 GPIO (Page No. 52-55)
> > 
> >>
> >> Fixes: '5fc6b1b62639c ("arm64: dts: ti: Introduce AM62A7 family of SoCs")'
> > 
> > What is the single quote for?
> > Also note the additional comment in the list to drop the extra EoL.
> > 
> > 
> > Did you check the MCU and WKUP GPIO count as well? if there are bugs
> > around it, fix it in a single commit please.
> yes, checked they are good.

OK, Thanks for checking, please respin once rc1 is out.
  

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 3198af08fb9f..de36abb243f1 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -462,7 +462,7 @@  main_gpio0: gpio@600000 {
 			     <193>, <194>, <195>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		ti,ngpio = <87>;
+		ti,ngpio = <92>;
 		ti,davinci-gpio-unbanked = <0>;
 		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 77 0>;
@@ -480,7 +480,7 @@  main_gpio1: gpio@601000 {
 			     <183>, <184>, <185>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		ti,ngpio = <88>;
+		ti,ngpio = <52>;
 		ti,davinci-gpio-unbanked = <0>;
 		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 78 0>;