diff mbox series

[09/10] arm64: dts: qcom: Add PMR735d pmic dtsi

Message ID	20221116103146.2556846-10-abel.vesa@linaro.org
State	New
Headers	Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; From: Abel Vesa <abel.vesa@linaro.org> To: Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>, Neil Armstrong <neil.armstrong@linaro.org> Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, "vkoul@kernel.org" <vkoul@kernel.org>, Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Subject: [PATCH 09/10] arm64: dts: qcom: Add PMR735d pmic dtsi Date: Wed, 16 Nov 2022 12:31:45 +0200 Message-Id: <20221116103146.2556846-10-abel.vesa@linaro.org> In-Reply-To: <20221116103146.2556846-1-abel.vesa@linaro.org> References: <20221116103146.2556846-1-abel.vesa@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	Add base device tree files for SM8550 \| [00/10] Add base device tree files for SM8550 [01/10] dt-bindings: arm: qcom: Document SM8550 SoC and boards [02/10] arm64: dts: qcom: Add base SM8550 dtsi [03/10] arm64: dts: qcom: Add pm8010 pmic dtsi [04/10] arm64: dts: qcom: Add PM8550 pmic dtsi [05/10] arm64: dts: qcom: Add PM8550b pmic dtsi [06/10] arm64: dts: qcom: Add PM8550ve pmic dtsi [07/10] arm64: dts: qcom: Add PM8550vs pmic dtsi [08/10] arm64: dts: qcom: Add PMK8550 pmic dtsi [09/10] arm64: dts: qcom: Add PMR735d pmic dtsi [10/10] arm64: dts: qcom: Add base SM8550 MTP dts

Commit Message

Abel Vesa Nov. 16, 2022, 10:31 a.m. UTC

  From: Neil Armstrong <neil.armstrong@linaro.org>

Add nodes for PMR735d in separate dtsi file.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/qcom/pmr735d.dtsi | 104 ++++++++++++++++++++++++++
 1 file changed, 104 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pmr735d.dtsi

Comments

Konrad Dybcio Nov. 16, 2022, 11:09 a.m. UTC | #1

On 16/11/2022 11:31, Abel Vesa wrote:
> From: Neil Armstrong <neil.armstrong@linaro.org>
> 
> Add nodes for PMR735d in separate dtsi file.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>   arch/arm64/boot/dts/qcom/pmr735d.dtsi | 104 ++++++++++++++++++++++++++
>   1 file changed, 104 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/qcom/pmr735d.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/pmr735d.dtsi b/arch/arm64/boot/dts/qcom/pmr735d.dtsi
> new file mode 100644
> index 000000000000..41fb664a10b3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/pmr735d.dtsi
> @@ -0,0 +1,104 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022, Linaro Limited
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/spmi/spmi.h>
> +
> +/ {
> +	thermal-zones {
> +		pmr735d-k-thermal {
> +			polling-delay-passive = <100>;
> +			polling-delay = <0>;
> +
> +			thermal-sensors = <&pmr735d_k_temp_alarm>;
> +
> +			trips {
> +				trip0 {
> +					temperature = <95000>;
> +					hysteresis = <0>;
> +					type = "passive";
> +				};
> +
> +				trip1 {
> +					temperature = <115000>;
> +					hysteresis = <0>;
> +					type = "hot";
> +				};
> +			};
> +		};
> +
> +		pmr735d-l-thermal {
> +			polling-delay-passive = <100>;
> +			polling-delay = <0>;
> +
> +			thermal-sensors = <&pmr735d_l_temp_alarm>;
> +
> +			trips {
> +				trip0 {
> +					temperature = <95000>;
> +					hysteresis = <0>;
> +					type = "passive";
> +				};
> +
> +				trip1 {
> +					temperature = <115000>;
> +					hysteresis = <0>;
> +					type = "hot";
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +
> +&spmi_bus {
> +	pmr735d_k: pmic@a {
> +		compatible = "qcom,pmr735d", "qcom,spmi-pmic";
> +		reg = <0xa SPMI_USID>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		pmr735d_k_temp_alarm: temp-alarm@a00 {
> +			compatible = "qcom,spmi-temp-alarm";
> +			reg = <0xa00>;
> +			interrupts = <0xa 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
> +			#thermal-sensor-cells = <0>;
> +		};
> +
> +		pmr735d_k_gpios: gpio@8800 {
> +			compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio";
> +			reg = <0x8800>;
> +			gpio-controller;
> +			gpio-ranges = <&pmr735d_k_gpios 0 0 2>;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +	};
> +
> +	pmr735d_l: pmic@b {
> +		compatible = "qcom,pmr735d", "qcom,spmi-pmic";
> +		reg = <0xb SPMI_USID>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		pmr735d_l_temp_alarm: temp-alarm@a00 {
> +			compatible = "qcom,spmi-temp-alarm";
> +			reg = <0xa00>;
> +			interrupts = <0xb 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
> +			#thermal-sensor-cells = <0>;
> +		};
> +
> +		pmr735d_l_gpios: gpio@8800 {
> +			compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio";
> +			reg = <0x8800>;
> +			gpio-controller;
> +			gpio-ranges = <&pmr735d_l_gpios 0 0 2>;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +	};
> +};

diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pmr735d.dtsi b/arch/arm64/boot/dts/qcom/pmr735d.dtsi
new file mode 100644
index 000000000000..41fb664a10b3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmr735d.dtsi
@@ -0,0 +1,104 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmr735d-k-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmr735d_k_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pmr735d-l-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmr735d_l_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+
+&spmi_bus {
+	pmr735d_k: pmic@a {
+		compatible = "qcom,pmr735d", "qcom,spmi-pmic";
+		reg = <0xa SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmr735d_k_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0xa 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmr735d_k_gpios: gpio@8800 {
+			compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmr735d_k_gpios 0 0 2>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmr735d_l: pmic@b {
+		compatible = "qcom,pmr735d", "qcom,spmi-pmic";
+		reg = <0xb SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmr735d_l_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0xb 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmr735d_l_gpios: gpio@8800 {
+			compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmr735d_l_gpios 0 0 2>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};