diff mbox series

[net-next,v7,2/7] dt-bindings: net: mvusb: Fix up DSA example

Message ID 20231024-marvell-88e6152-wan-led-v7-2-2869347697d1@linaro.org
State New
Headers
Series Create a binding for the Marvell MV88E6xxx DSA switches |

Commit Message

Linus Walleij Oct. 24, 2023, 1:20 p.m. UTC 
  When adding a proper schema for the Marvell mx88e6xxx switch,
the scripts start complaining about this embedded example:

  dtschema/dtc warnings/errors:
  net/marvell,mvusb.example.dtb: switch@0: ports: '#address-cells'
  is a required property
  from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#
  net/marvell,mvusb.example.dtb: switch@0: ports: '#size-cells'
  is a required property
  from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#

Fix this up by extending the example with those properties in
the ports node.

While we are at it, rename "ports" to "ethernet-ports" and rename
"switch" to "ethernet-switch" as this is recommended practice.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 Documentation/devicetree/bindings/net/marvell,mvusb.yaml | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

Comments

Florian Fainelli Oct. 24, 2023, 4:34 p.m. UTC | #1 
On 10/24/23 06:20, Linus Walleij wrote:
> When adding a proper schema for the Marvell mx88e6xxx switch,
> the scripts start complaining about this embedded example:
> 
>    dtschema/dtc warnings/errors:
>    net/marvell,mvusb.example.dtb: switch@0: ports: '#address-cells'
>    is a required property
>    from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#
>    net/marvell,mvusb.example.dtb: switch@0: ports: '#size-cells'
>    is a required property
>    from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#
> 
> Fix this up by extending the example with those properties in
> the ports node.
> 
> While we are at it, rename "ports" to "ethernet-ports" and rename
> "switch" to "ethernet-switch" as this is recommended practice.
> 
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
index 3a3325168048..ab838c1ffeed 100644
--- a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
+++ b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
@@ -50,11 +50,14 @@  examples:
                     #address-cells = <1>;
                     #size-cells = <0>;
 
-                    switch@0 {
+                    ethernet-switch@0 {
                             compatible = "marvell,mv88e6190";
                             reg = <0x0>;
 
-                            ports {
+                            ethernet-ports {
+                                    #address-cells = <1>;
+                                    #size-cells = <0>;
+
                                     /* Port definitions */
                             };