[v2,1/1] PCI: dwc: Use FIELD_GET/PREP()
Commit Message
Convert open-coded variants of PCI field access into FIELD_GET/PREP()
to make the code easier to understand.
Add two missing defines into pci_regs.h. Logically, the Max No-Snoop
Latency Register is a separate word sized register in the PCIe spec,
but the pre-existing LTR defines in pci_regs.h with dword long values
seem to consider the registers together (the same goes for the only
user). Thus, follow the custom and make the new values also take both
word long LTR registers as a joint dword register.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
This patch REPLACES the previous patch which caused the build fail on
arm and also failed to copy the entire value into nosnoop register
like the original code did.
v2:
- Correct define name used in FIELD_PREP()
- Correctly copy the contents of the full register, not just the
Max Latency Value field.
- Wrap also the 110 literal into FIELD_PREP()
drivers/pci/controller/dwc/pcie-designware-ep.c | 7 ++++---
drivers/pci/controller/dwc/pcie-tegra194.c | 10 +++++++---
include/uapi/linux/pci_regs.h | 2 ++
3 files changed, 13 insertions(+), 6 deletions(-)
Comments
On Tue, Oct 24, 2023 at 02:03:36PM +0300, Ilpo Järvinen wrote:
> Convert open-coded variants of PCI field access into FIELD_GET/PREP()
> to make the code easier to understand.
>
> Add two missing defines into pci_regs.h. Logically, the Max No-Snoop
> Latency Register is a separate word sized register in the PCIe spec,
> but the pre-existing LTR defines in pci_regs.h with dword long values
> seem to consider the registers together (the same goes for the only
> user). Thus, follow the custom and make the new values also take both
> word long LTR registers as a joint dword register.
>
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replaced the previous "PCI: dwc: Use FIELD_GET/PREP()" patch on
pci/field-get, thanks!
Here's the diff from a1a3a781d0ba (the previous head of pci/field-get)
to the current head:
diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 12d5ab2f5219..f2a515b639ab 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -126,6 +126,7 @@
#define APPL_LTR_MSG_1 0xC4
#define LTR_MSG_REQ BIT(15)
+#define LTR_NOSNOOP_MSG_REQ BIT(31)
#define APPL_LTR_MSG_2 0xC8
#define APPL_LTR_MSG_2_LTR_MSG_REQ_STATE BIT(3)
@@ -495,8 +496,12 @@ static irqreturn_t tegra_pcie_ep_irq_thread(int irq, void *arg)
ktime_t timeout;
/* 110us for both snoop and no-snoop */
- val = 110 | FIELD_PREP(PCI_LTR_SCALE_SHIFT, 2) | LTR_MSG_REQ;
- val |= FIELD_PREP(PCI_LTR_NOSNOOP_VALUE, val);
+ val = FIELD_PREP(PCI_LTR_VALUE_MASK, 110) |
+ FIELD_PREP(PCI_LTR_SCALE_MASK, 2) |
+ LTR_MSG_REQ |
+ FIELD_PREP(PCI_LTR_NOSNOOP_VALUE, 110) |
+ FIELD_PREP(PCI_LTR_NOSNOOP_SCALE, 2) |
+ LTR_NOSNOOP_MSG_REQ;
appl_writel(pcie, val, APPL_LTR_MSG_1);
/* Send LTR upstream */
> ---
>
> This patch REPLACES the previous patch which caused the build fail on
> arm and also failed to copy the entire value into nosnoop register
> like the original code did.
>
> v2:
> - Correct define name used in FIELD_PREP()
> - Correctly copy the contents of the full register, not just the
> Max Latency Value field.
> - Wrap also the 110 literal into FIELD_PREP()
>
> drivers/pci/controller/dwc/pcie-designware-ep.c | 7 ++++---
> drivers/pci/controller/dwc/pcie-tegra194.c | 10 +++++++---
> include/uapi/linux/pci_regs.h | 2 ++
> 3 files changed, 13 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
> index f9182f8d552f..20bef1436bfb 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> @@ -6,6 +6,7 @@
> * Author: Kishon Vijay Abraham I <kishon@ti.com>
> */
>
> +#include <linux/bitfield.h>
> #include <linux/of.h>
> #include <linux/platform_device.h>
>
> @@ -334,7 +335,7 @@ static int dw_pcie_ep_get_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no)
> if (!(val & PCI_MSI_FLAGS_ENABLE))
> return -EINVAL;
>
> - val = (val & PCI_MSI_FLAGS_QSIZE) >> 4;
> + val = FIELD_GET(PCI_MSI_FLAGS_QSIZE, val);
>
> return val;
> }
> @@ -357,7 +358,7 @@ static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> reg = ep_func->msi_cap + func_offset + PCI_MSI_FLAGS;
> val = dw_pcie_readw_dbi(pci, reg);
> val &= ~PCI_MSI_FLAGS_QMASK;
> - val |= (interrupts << 1) & PCI_MSI_FLAGS_QMASK;
> + val |= FIELD_PREP(PCI_MSI_FLAGS_QMASK, interrupts);
> dw_pcie_dbi_ro_wr_en(pci);
> dw_pcie_writew_dbi(pci, reg, val);
> dw_pcie_dbi_ro_wr_dis(pci);
> @@ -584,7 +585,7 @@ int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
>
> reg = ep_func->msix_cap + func_offset + PCI_MSIX_TABLE;
> tbl_offset = dw_pcie_readl_dbi(pci, reg);
> - bir = (tbl_offset & PCI_MSIX_TABLE_BIR);
> + bir = FIELD_GET(PCI_MSIX_TABLE_BIR, tbl_offset);
> tbl_offset &= PCI_MSIX_TABLE_OFFSET;
>
> msix_tbl = ep->epf_bar[bir]->addr + tbl_offset;
> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> index 248cd9347e8f..f2a515b639ab 100644
> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
> @@ -126,7 +126,7 @@
>
> #define APPL_LTR_MSG_1 0xC4
> #define LTR_MSG_REQ BIT(15)
> -#define LTR_MST_NO_SNOOP_SHIFT 16
> +#define LTR_NOSNOOP_MSG_REQ BIT(31)
>
> #define APPL_LTR_MSG_2 0xC8
> #define APPL_LTR_MSG_2_LTR_MSG_REQ_STATE BIT(3)
> @@ -496,8 +496,12 @@ static irqreturn_t tegra_pcie_ep_irq_thread(int irq, void *arg)
> ktime_t timeout;
>
> /* 110us for both snoop and no-snoop */
> - val = 110 | (2 << PCI_LTR_SCALE_SHIFT) | LTR_MSG_REQ;
> - val |= (val << LTR_MST_NO_SNOOP_SHIFT);
> + val = FIELD_PREP(PCI_LTR_VALUE_MASK, 110) |
> + FIELD_PREP(PCI_LTR_SCALE_MASK, 2) |
> + LTR_MSG_REQ |
> + FIELD_PREP(PCI_LTR_NOSNOOP_VALUE, 110) |
> + FIELD_PREP(PCI_LTR_NOSNOOP_SCALE, 2) |
> + LTR_NOSNOOP_MSG_REQ;
> appl_writel(pcie, val, APPL_LTR_MSG_1);
>
> /* Send LTR upstream */
> diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
> index e5f558d96493..495f0ae4ecd5 100644
> --- a/include/uapi/linux/pci_regs.h
> +++ b/include/uapi/linux/pci_regs.h
> @@ -975,6 +975,8 @@
> #define PCI_LTR_VALUE_MASK 0x000003ff
> #define PCI_LTR_SCALE_MASK 0x00001c00
> #define PCI_LTR_SCALE_SHIFT 10
> +#define PCI_LTR_NOSNOOP_VALUE 0x03ff0000 /* Max No-Snoop Latency Value */
> +#define PCI_LTR_NOSNOOP_SCALE 0x1c000000 /* Scale for Max Value */
> #define PCI_EXT_CAP_LTR_SIZEOF 8
>
> /* Access Control Service */
> --
> 2.30.2
>
@@ -6,6 +6,7 @@
* Author: Kishon Vijay Abraham I <kishon@ti.com>
*/
+#include <linux/bitfield.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@@ -334,7 +335,7 @@ static int dw_pcie_ep_get_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no)
if (!(val & PCI_MSI_FLAGS_ENABLE))
return -EINVAL;
- val = (val & PCI_MSI_FLAGS_QSIZE) >> 4;
+ val = FIELD_GET(PCI_MSI_FLAGS_QSIZE, val);
return val;
}
@@ -357,7 +358,7 @@ static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
reg = ep_func->msi_cap + func_offset + PCI_MSI_FLAGS;
val = dw_pcie_readw_dbi(pci, reg);
val &= ~PCI_MSI_FLAGS_QMASK;
- val |= (interrupts << 1) & PCI_MSI_FLAGS_QMASK;
+ val |= FIELD_PREP(PCI_MSI_FLAGS_QMASK, interrupts);
dw_pcie_dbi_ro_wr_en(pci);
dw_pcie_writew_dbi(pci, reg, val);
dw_pcie_dbi_ro_wr_dis(pci);
@@ -584,7 +585,7 @@ int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
reg = ep_func->msix_cap + func_offset + PCI_MSIX_TABLE;
tbl_offset = dw_pcie_readl_dbi(pci, reg);
- bir = (tbl_offset & PCI_MSIX_TABLE_BIR);
+ bir = FIELD_GET(PCI_MSIX_TABLE_BIR, tbl_offset);
tbl_offset &= PCI_MSIX_TABLE_OFFSET;
msix_tbl = ep->epf_bar[bir]->addr + tbl_offset;
@@ -126,7 +126,7 @@
#define APPL_LTR_MSG_1 0xC4
#define LTR_MSG_REQ BIT(15)
-#define LTR_MST_NO_SNOOP_SHIFT 16
+#define LTR_NOSNOOP_MSG_REQ BIT(31)
#define APPL_LTR_MSG_2 0xC8
#define APPL_LTR_MSG_2_LTR_MSG_REQ_STATE BIT(3)
@@ -496,8 +496,12 @@ static irqreturn_t tegra_pcie_ep_irq_thread(int irq, void *arg)
ktime_t timeout;
/* 110us for both snoop and no-snoop */
- val = 110 | (2 << PCI_LTR_SCALE_SHIFT) | LTR_MSG_REQ;
- val |= (val << LTR_MST_NO_SNOOP_SHIFT);
+ val = FIELD_PREP(PCI_LTR_VALUE_MASK, 110) |
+ FIELD_PREP(PCI_LTR_SCALE_MASK, 2) |
+ LTR_MSG_REQ |
+ FIELD_PREP(PCI_LTR_NOSNOOP_VALUE, 110) |
+ FIELD_PREP(PCI_LTR_NOSNOOP_SCALE, 2) |
+ LTR_NOSNOOP_MSG_REQ;
appl_writel(pcie, val, APPL_LTR_MSG_1);
/* Send LTR upstream */
@@ -975,6 +975,8 @@
#define PCI_LTR_VALUE_MASK 0x000003ff
#define PCI_LTR_SCALE_MASK 0x00001c00
#define PCI_LTR_SCALE_SHIFT 10
+#define PCI_LTR_NOSNOOP_VALUE 0x03ff0000 /* Max No-Snoop Latency Value */
+#define PCI_LTR_NOSNOOP_SCALE 0x1c000000 /* Scale for Max Value */
#define PCI_EXT_CAP_LTR_SIZEOF 8
/* Access Control Service */