[6/6] arm64: dts: mt8183: Add jacuzzi pico/pico6 board

Message ID 20231024000724.57714-7-hsinyi@chromium.org
State New
Headers
Series Add a few mt8183 follower boards. |

Commit Message

Hsin-Yi Wang Oct. 24, 2023, 12:02 a.m. UTC
  pico is also known as Acer Chromebook Spin 311.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
 .../mediatek/mt8183-kukui-jacuzzi-pico.dts    |  36 ++++++
 .../mediatek/mt8183-kukui-jacuzzi-pico6.dts   | 110 ++++++++++++++++++
 2 files changed, 146 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
  

Comments

Krzysztof Kozlowski Oct. 24, 2023, 3:21 p.m. UTC | #1
On 24/10/2023 02:02, Hsin-Yi Wang wrote:
> pico is also known as Acer Chromebook Spin 311.
> 
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---

...

> +&wifi_pwrseq {
> +	post-power-on-delay-ms = <50>;
> +
> +	/* Toggle WIFI_ENABLE to reset the chip. */
> +	reset-gpios = <&pio 8 1>;

Use proper defines.

> +};
> +
> +&wifi_pins_pwrseq {
> +	pins_wifi_enable {

No underscores in node names.

Best regards,
Krzysztof
  

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts
new file mode 100644
index 000000000000..e230323b3a54
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts
@@ -0,0 +1,36 @@ 
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google pico board";
+	chassis-type = "convertible";
+	compatible = "google,pico-sku1", "google,pico", "mediatek,mt8183";
+};
+
+&i2c_tunnel {
+	google,remote-bus = <0>;
+};
+
+&i2c2 {
+	i2c-scl-internal-delay-ns = <25000>;
+
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
new file mode 100644
index 000000000000..3e4bc451039e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
@@ -0,0 +1,110 @@ 
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google pico6 board";
+	chassis-type = "convertible";
+	compatible = "google,pico-sku2", "google,pico", "mediatek,mt8183";
+
+	bt_wakeup: bt-wakeup {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins_wakeup>;
+
+		wobt {
+			label = "Wake on BT";
+			gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+};
+
+&i2c_tunnel {
+	google,remote-bus = <0>;
+};
+
+&i2c2 {
+	i2c-scl-internal-delay-ns = <25000>;
+
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
+
+&wifi_wakeup {
+	wowlan {
+		gpios = <&pio 113 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&wifi_pwrseq {
+	post-power-on-delay-ms = <50>;
+
+	/* Toggle WIFI_ENABLE to reset the chip. */
+	reset-gpios = <&pio 8 1>;
+};
+
+&wifi_pins_pwrseq {
+	pins_wifi_enable {
+		pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
+	};
+};
+
+&mmc1_pins_default {
+	pins_cmd_dat {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+	pins_clk {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+};
+
+&mmc1_pins_uhs {
+	pins_clk {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+};
+
+&mmc1 {
+	bt_reset: bt-reset {
+		compatible = "mediatek,mt7921s-bluetooth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins_reset>;
+		reset-gpios = <&pio 120 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pio {
+	bt_pins_wakeup: bt-pins-wakeup {
+		pins_bt_wakeup {
+			pinmux = <PINMUX_GPIO42__FUNC_GPIO42>;
+			input-enable;
+		};
+	};
+
+	bt_pins_reset: bt-pins-reset {
+		pins_bt_reset {
+			pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
+			output-high;
+		};
+	};
+};
+
+/delete-node/ &bluetooth;
+/delete-node/ &bt_pins;