[PATCH-1v4,expand] Enable vector mode for compare_by_pieces [PR111449]

  Hi,
  Vector mode instructions are efficient for compare on some targets.
This patch enables vector mode for compare_by_pieces. Two help
functions are added to check if vector mode is available for certain
by pieces operations and if if optabs exists for the mode and certain
by pieces operations. One member is added in class op_by_pieces_d to
record the type of operations.

  The test case is in the second patch which is rs6000 specific.

  Compared to last version, the main change is to add a target hook
check - scalar_mode_supported_p when retrieving the available scalar
modes. The mode which is not supported for a target should be skipped.
(e.g. TImode on ppc). Also some function names and comments are refined
according to reviewer's advice.

  Bootstrapped and tested on x86 and powerpc64-linux BE and LE with no
regressions.

Thanks
Gui Haochen

ChangeLog
Expand: Enable vector mode for by pieces compares

Vector mode compare instructions are efficient for equality compare on
rs6000. This patch refactors the codes of by pieces operation to enable
vector mode for compare.

gcc/
	PR target/111449
	* expr.cc (can_use_qi_vectors): New function to return true if
	we know how to implement OP using vectors of bytes.
	(qi_vector_mode_supported_p): New function to check if optabs
	exists for the mode and certain by pieces operations.
	(widest_fixed_size_mode_for_size): Replace the second argument
	with the type of by pieces operations.  Call can_use_qi_vectors
	and qi_vector_mode_supported_p to do the check.  Call
	scalar_mode_supported_p to check if the scalar mode is supported.
	(by_pieces_ninsns): Pass the type of by pieces operation to
	widest_fixed_size_mode_for_size.
	(class op_by_pieces_d): Remove m_qi_vector_mode.  Add m_op to
	record the type of by pieces operations.
	(op_by_pieces_d::op_by_pieces_d): Change last argument to the
	type of by pieces operations, initialize m_op with it.  Pass
	m_op to function widest_fixed_size_mode_for_size.
	(op_by_pieces_d::get_usable_mode): Pass m_op to function
	widest_fixed_size_mode_for_size.
	(op_by_pieces_d::smallest_fixed_size_mode_for_size): Call
	can_use_qi_vectors and qi_vector_mode_supported_p to do the
	check.
	(op_by_pieces_d::run): Pass m_op to function
	widest_fixed_size_mode_for_size.
	(move_by_pieces_d::move_by_pieces_d): Set m_op to MOVE_BY_PIECES.
	(store_by_pieces_d::store_by_pieces_d): Set m_op with the op.
	(can_store_by_pieces): Pass the type of by pieces operations to
	widest_fixed_size_mode_for_size.
	(clear_by_pieces): Initialize class store_by_pieces_d with
	CLEAR_BY_PIECES.
	(compare_by_pieces_d::compare_by_pieces_d): Set m_op to
	COMPARE_BY_PIECES.

patch.diff
  

HAO CHEN GUI <guihaoc@linux.ibm.com> writes:
> Hi,
>   Vector mode instructions are efficient for compare on some targets.
> This patch enables vector mode for compare_by_pieces. Two help
> functions are added to check if vector mode is available for certain
> by pieces operations and if if optabs exists for the mode and certain
> by pieces operations. One member is added in class op_by_pieces_d to
> record the type of operations.
>
>   The test case is in the second patch which is rs6000 specific.
>
>   Compared to last version, the main change is to add a target hook
> check - scalar_mode_supported_p when retrieving the available scalar
> modes. The mode which is not supported for a target should be skipped.
> (e.g. TImode on ppc). Also some function names and comments are refined
> according to reviewer's advice.
>
>   Bootstrapped and tested on x86 and powerpc64-linux BE and LE with no
> regressions.
>
> Thanks
> Gui Haochen
>
> ChangeLog
> Expand: Enable vector mode for by pieces compares
>
> Vector mode compare instructions are efficient for equality compare on
> rs6000. This patch refactors the codes of by pieces operation to enable
> vector mode for compare.
>
> gcc/
> 	PR target/111449
> 	* expr.cc (can_use_qi_vectors): New function to return true if
> 	we know how to implement OP using vectors of bytes.
> 	(qi_vector_mode_supported_p): New function to check if optabs
> 	exists for the mode and certain by pieces operations.
> 	(widest_fixed_size_mode_for_size): Replace the second argument
> 	with the type of by pieces operations.  Call can_use_qi_vectors
> 	and qi_vector_mode_supported_p to do the check.  Call
> 	scalar_mode_supported_p to check if the scalar mode is supported.
> 	(by_pieces_ninsns): Pass the type of by pieces operation to
> 	widest_fixed_size_mode_for_size.
> 	(class op_by_pieces_d): Remove m_qi_vector_mode.  Add m_op to
> 	record the type of by pieces operations.
> 	(op_by_pieces_d::op_by_pieces_d): Change last argument to the
> 	type of by pieces operations, initialize m_op with it.  Pass
> 	m_op to function widest_fixed_size_mode_for_size.
> 	(op_by_pieces_d::get_usable_mode): Pass m_op to function
> 	widest_fixed_size_mode_for_size.
> 	(op_by_pieces_d::smallest_fixed_size_mode_for_size): Call
> 	can_use_qi_vectors and qi_vector_mode_supported_p to do the
> 	check.
> 	(op_by_pieces_d::run): Pass m_op to function
> 	widest_fixed_size_mode_for_size.
> 	(move_by_pieces_d::move_by_pieces_d): Set m_op to MOVE_BY_PIECES.
> 	(store_by_pieces_d::store_by_pieces_d): Set m_op with the op.
> 	(can_store_by_pieces): Pass the type of by pieces operations to
> 	widest_fixed_size_mode_for_size.
> 	(clear_by_pieces): Initialize class store_by_pieces_d with
> 	CLEAR_BY_PIECES.
> 	(compare_by_pieces_d::compare_by_pieces_d): Set m_op to
> 	COMPARE_BY_PIECES.

OK, thanks.  And thanks for your patience.

Richard

> patch.diff
> diff --git a/gcc/expr.cc b/gcc/expr.cc
> index 2c9930ec674..ad5f9dd8ec2 100644
> --- a/gcc/expr.cc
> +++ b/gcc/expr.cc
> @@ -988,18 +988,44 @@ alignment_for_piecewise_move (unsigned int max_pieces, unsigned int align)
>    return align;
>  }
>
> -/* Return the widest QI vector, if QI_MODE is true, or integer mode
> -   that is narrower than SIZE bytes.  */
> +/* Return true if we know how to implement OP using vectors of bytes.  */
> +static bool
> +can_use_qi_vectors (by_pieces_operation op)
> +{
> +  return (op == COMPARE_BY_PIECES
> +	  || op == SET_BY_PIECES
> +	  || op == CLEAR_BY_PIECES);
> +}
> +
> +/* Return true if optabs exists for the mode and certain by pieces
> +   operations.  */
> +static bool
> +qi_vector_mode_supported_p (fixed_size_mode mode, by_pieces_operation op)
> +{
> +  if ((op == SET_BY_PIECES || op == CLEAR_BY_PIECES)
> +      && optab_handler (vec_duplicate_optab, mode) != CODE_FOR_nothing)
> +    return true;
> +
> +  if (op == COMPARE_BY_PIECES
> +      && optab_handler (mov_optab, mode) != CODE_FOR_nothing
> +      && can_compare_p (EQ, mode, ccp_jump))
> +    return true;
>
> +  return false;
> +}
> +
> +/* Return the widest mode that can be used to perform part of an
> +   operation OP on SIZE bytes.  Try to use QI vector modes where
> +   possible.  */
>  static fixed_size_mode
> -widest_fixed_size_mode_for_size (unsigned int size, bool qi_vector)
> +widest_fixed_size_mode_for_size (unsigned int size, by_pieces_operation op)
>  {
>    fixed_size_mode result = NARROWEST_INT_MODE;
>
>    gcc_checking_assert (size > 1);
>
>    /* Use QI vector only if size is wider than a WORD.  */
> -  if (qi_vector && size > UNITS_PER_WORD)
> +  if (can_use_qi_vectors (op) && size > UNITS_PER_WORD)
>      {
>        machine_mode mode;
>        fixed_size_mode candidate;
> @@ -1009,8 +1035,7 @@ widest_fixed_size_mode_for_size (unsigned int size, bool qi_vector)
>  	  {
>  	    if (GET_MODE_SIZE (candidate) >= size)
>  	      break;
> -	    if (optab_handler (vec_duplicate_optab, candidate)
> -		!= CODE_FOR_nothing)
> +	    if (qi_vector_mode_supported_p (candidate, op))
>  	      result = candidate;
>  	  }
>
> @@ -1019,9 +1044,14 @@ widest_fixed_size_mode_for_size (unsigned int size, bool qi_vector)
>      }
>
>    opt_scalar_int_mode tmode;
> +  scalar_int_mode mode;
>    FOR_EACH_MODE_IN_CLASS (tmode, MODE_INT)
> -    if (GET_MODE_SIZE (tmode.require ()) < size)
> -      result = tmode.require ();
> +    {
> +      mode = tmode.require ();
> +      if (GET_MODE_SIZE (mode) < size
> +	  && targetm.scalar_mode_supported_p (mode))
> +      result = mode;
> +    }
>
>    return result;
>  }
> @@ -1061,8 +1091,7 @@ by_pieces_ninsns (unsigned HOST_WIDE_INT l, unsigned int align,
>      {
>        /* NB: Round up L and ALIGN to the widest integer mode for
>  	 MAX_SIZE.  */
> -      mode = widest_fixed_size_mode_for_size (max_size,
> -					      op == SET_BY_PIECES);
> +      mode = widest_fixed_size_mode_for_size (max_size, op);
>        if (optab_handler (mov_optab, mode) != CODE_FOR_nothing)
>  	{
>  	  unsigned HOST_WIDE_INT up = ROUND_UP (l, GET_MODE_SIZE (mode));
> @@ -1076,8 +1105,7 @@ by_pieces_ninsns (unsigned HOST_WIDE_INT l, unsigned int align,
>
>    while (max_size > 1 && l > 0)
>      {
> -      mode = widest_fixed_size_mode_for_size (max_size,
> -					      op == SET_BY_PIECES);
> +      mode = widest_fixed_size_mode_for_size (max_size, op);
>        enum insn_code icode;
>
>        unsigned int modesize = GET_MODE_SIZE (mode);
> @@ -1317,8 +1345,8 @@ class op_by_pieces_d
>    bool m_push;
>    /* True if targetm.overlap_op_by_pieces_p () returns true.  */
>    bool m_overlap_op_by_pieces;
> -  /* True if QI vector mode can be used.  */
> -  bool m_qi_vector_mode;
> +  /* The type of operation that we're performing.  */
> +  by_pieces_operation m_op;
>
>    /* Virtual functions, overriden by derived classes for the specific
>       operation.  */
> @@ -1331,7 +1359,7 @@ class op_by_pieces_d
>   public:
>    op_by_pieces_d (unsigned int, rtx, bool, rtx, bool, by_pieces_constfn,
>  		  void *, unsigned HOST_WIDE_INT, unsigned int, bool,
> -		  bool = false);
> +		  by_pieces_operation);
>    void run ();
>  };
>
> @@ -1349,11 +1377,11 @@ op_by_pieces_d::op_by_pieces_d (unsigned int max_pieces, rtx to,
>  				void *from_cfn_data,
>  				unsigned HOST_WIDE_INT len,
>  				unsigned int align, bool push,
> -				bool qi_vector_mode)
> +				by_pieces_operation op)
>    : m_to (to, to_load, NULL, NULL),
>      m_from (from, from_load, from_cfn, from_cfn_data),
>      m_len (len), m_max_size (max_pieces + 1),
> -    m_push (push), m_qi_vector_mode (qi_vector_mode)
> +    m_push (push), m_op (op)
>  {
>    int toi = m_to.get_addr_inc ();
>    int fromi = m_from.get_addr_inc ();
> @@ -1375,8 +1403,7 @@ op_by_pieces_d::op_by_pieces_d (unsigned int max_pieces, rtx to,
>      {
>        /* Find the mode of the largest comparison.  */
>        fixed_size_mode mode
> -	= widest_fixed_size_mode_for_size (m_max_size,
> -					   m_qi_vector_mode);
> +	= widest_fixed_size_mode_for_size (m_max_size, m_op);
>
>        m_from.decide_autoinc (mode, m_reverse, len);
>        m_to.decide_autoinc (mode, m_reverse, len);
> @@ -1401,7 +1428,7 @@ op_by_pieces_d::get_usable_mode (fixed_size_mode mode, unsigned int len)
>        if (len >= size && prepare_mode (mode, m_align))
>  	break;
>        /* widest_fixed_size_mode_for_size checks SIZE > 1.  */
> -      mode = widest_fixed_size_mode_for_size (size, m_qi_vector_mode);
> +      mode = widest_fixed_size_mode_for_size (size, m_op);
>      }
>    while (1);
>    return mode;
> @@ -1414,7 +1441,7 @@ fixed_size_mode
>  op_by_pieces_d::smallest_fixed_size_mode_for_size (unsigned int size)
>  {
>    /* Use QI vector only for > size of WORD.  */
> -  if (m_qi_vector_mode && size > UNITS_PER_WORD)
> +  if (can_use_qi_vectors (m_op) && size > UNITS_PER_WORD)
>      {
>        machine_mode mode;
>        fixed_size_mode candidate;
> @@ -1427,8 +1454,7 @@ op_by_pieces_d::smallest_fixed_size_mode_for_size (unsigned int size)
>  	      break;
>
>  	    if (GET_MODE_SIZE (candidate) >= size
> -		&& (optab_handler (vec_duplicate_optab, candidate)
> -		    != CODE_FOR_nothing))
> +		&& qi_vector_mode_supported_p (candidate, m_op))
>  	      return candidate;
>  	  }
>      }
> @@ -1451,7 +1477,7 @@ op_by_pieces_d::run ()
>
>    /* widest_fixed_size_mode_for_size checks M_MAX_SIZE > 1.  */
>    fixed_size_mode mode
> -    = widest_fixed_size_mode_for_size (m_max_size, m_qi_vector_mode);
> +    = widest_fixed_size_mode_for_size (m_max_size, m_op);
>    mode = get_usable_mode (mode, length);
>
>    by_pieces_prev to_prev = { nullptr, mode };
> @@ -1516,8 +1542,7 @@ op_by_pieces_d::run ()
>        else
>  	{
>  	  /* widest_fixed_size_mode_for_size checks SIZE > 1.  */
> -	  mode = widest_fixed_size_mode_for_size (size,
> -						  m_qi_vector_mode);
> +	  mode = widest_fixed_size_mode_for_size (size, m_op);
>  	  mode = get_usable_mode (mode, length);
>  	}
>      }
> @@ -1543,7 +1568,7 @@ class move_by_pieces_d : public op_by_pieces_d
>    move_by_pieces_d (rtx to, rtx from, unsigned HOST_WIDE_INT len,
>  		    unsigned int align)
>      : op_by_pieces_d (MOVE_MAX_PIECES, to, false, from, true, NULL,
> -		      NULL, len, align, PUSHG_P (to))
> +		      NULL, len, align, PUSHG_P (to), MOVE_BY_PIECES)
>    {
>    }
>    rtx finish_retmode (memop_ret);
> @@ -1632,15 +1657,16 @@ move_by_pieces (rtx to, rtx from, unsigned HOST_WIDE_INT len,
>  class store_by_pieces_d : public op_by_pieces_d
>  {
>    insn_gen_fn m_gen_fun;
> +
>    void generate (rtx, rtx, machine_mode) final override;
>    bool prepare_mode (machine_mode, unsigned int) final override;
>
>   public:
>    store_by_pieces_d (rtx to, by_pieces_constfn cfn, void *cfn_data,
>  		     unsigned HOST_WIDE_INT len, unsigned int align,
> -		     bool qi_vector_mode)
> +		     by_pieces_operation op)
>      : op_by_pieces_d (STORE_MAX_PIECES, to, false, NULL_RTX, true, cfn,
> -		      cfn_data, len, align, false, qi_vector_mode)
> +		      cfn_data, len, align, false, op)
>    {
>    }
>    rtx finish_retmode (memop_ret);
> @@ -1729,8 +1755,8 @@ can_store_by_pieces (unsigned HOST_WIDE_INT len,
>        max_size = STORE_MAX_PIECES + 1;
>        while (max_size > 1 && l > 0)
>  	{
> -	  fixed_size_mode mode
> -	    = widest_fixed_size_mode_for_size (max_size, memsetp);
> +	  auto op = memsetp ? SET_BY_PIECES : STORE_BY_PIECES;
> +	  auto mode = widest_fixed_size_mode_for_size (max_size, op);
>
>  	  icode = optab_handler (mov_optab, mode);
>  	  if (icode != CODE_FOR_nothing
> @@ -1793,7 +1819,7 @@ store_by_pieces (rtx to, unsigned HOST_WIDE_INT len,
>  		 optimize_insn_for_speed_p ()));
>
>    store_by_pieces_d data (to, constfun, constfundata, len, align,
> -			  memsetp);
> +			  memsetp ? SET_BY_PIECES : STORE_BY_PIECES);
>    data.run ();
>
>    if (retmode != RETURN_BEGIN)
> @@ -1814,7 +1840,7 @@ clear_by_pieces (rtx to, unsigned HOST_WIDE_INT len, unsigned int align)
>    /* Use builtin_memset_read_str to support vector mode broadcast.  */
>    char c = 0;
>    store_by_pieces_d data (to, builtin_memset_read_str, &c, len, align,
> -			  true);
> +			  CLEAR_BY_PIECES);
>    data.run ();
>  }
>
> @@ -1832,12 +1858,13 @@ class compare_by_pieces_d : public op_by_pieces_d
>    void generate (rtx, rtx, machine_mode) final override;
>    bool prepare_mode (machine_mode, unsigned int) final override;
>    void finish_mode (machine_mode) final override;
> +
>   public:
>    compare_by_pieces_d (rtx op0, rtx op1, by_pieces_constfn op1_cfn,
>  		       void *op1_cfn_data, HOST_WIDE_INT len, int align,
>  		       rtx_code_label *fail_label)
>      : op_by_pieces_d (COMPARE_MAX_PIECES, op0, true, op1, true, op1_cfn,
> -		      op1_cfn_data, len, align, false)
> +		      op1_cfn_data, len, align, false, COMPARE_BY_PIECES)
>    {
>      m_fail_label = fail_label;
>    }
  

Committed as r14-4835.

https://gcc.gnu.org/g:f08ca5903c7a02b450b93143467f70b9fd8e0085

Thanks
Gui Haochen

在 2023/10/20 16:49, Richard Sandiford 写道:
> HAO CHEN GUI <guihaoc@linux.ibm.com> writes:
>> Hi,
>>   Vector mode instructions are efficient for compare on some targets.
>> This patch enables vector mode for compare_by_pieces. Two help
>> functions are added to check if vector mode is available for certain
>> by pieces operations and if if optabs exists for the mode and certain
>> by pieces operations. One member is added in class op_by_pieces_d to
>> record the type of operations.
>>
>>   The test case is in the second patch which is rs6000 specific.
>>
>>   Compared to last version, the main change is to add a target hook
>> check - scalar_mode_supported_p when retrieving the available scalar
>> modes. The mode which is not supported for a target should be skipped.
>> (e.g. TImode on ppc). Also some function names and comments are refined
>> according to reviewer's advice.
>>
>>   Bootstrapped and tested on x86 and powerpc64-linux BE and LE with no
>> regressions.
>>
>> Thanks
>> Gui Haochen
>>
>> ChangeLog
>> Expand: Enable vector mode for by pieces compares
>>
>> Vector mode compare instructions are efficient for equality compare on
>> rs6000. This patch refactors the codes of by pieces operation to enable
>> vector mode for compare.
>>
>> gcc/
>> 	PR target/111449
>> 	* expr.cc (can_use_qi_vectors): New function to return true if
>> 	we know how to implement OP using vectors of bytes.
>> 	(qi_vector_mode_supported_p): New function to check if optabs
>> 	exists for the mode and certain by pieces operations.
>> 	(widest_fixed_size_mode_for_size): Replace the second argument
>> 	with the type of by pieces operations.  Call can_use_qi_vectors
>> 	and qi_vector_mode_supported_p to do the check.  Call
>> 	scalar_mode_supported_p to check if the scalar mode is supported.
>> 	(by_pieces_ninsns): Pass the type of by pieces operation to
>> 	widest_fixed_size_mode_for_size.
>> 	(class op_by_pieces_d): Remove m_qi_vector_mode.  Add m_op to
>> 	record the type of by pieces operations.
>> 	(op_by_pieces_d::op_by_pieces_d): Change last argument to the
>> 	type of by pieces operations, initialize m_op with it.  Pass
>> 	m_op to function widest_fixed_size_mode_for_size.
>> 	(op_by_pieces_d::get_usable_mode): Pass m_op to function
>> 	widest_fixed_size_mode_for_size.
>> 	(op_by_pieces_d::smallest_fixed_size_mode_for_size): Call
>> 	can_use_qi_vectors and qi_vector_mode_supported_p to do the
>> 	check.
>> 	(op_by_pieces_d::run): Pass m_op to function
>> 	widest_fixed_size_mode_for_size.
>> 	(move_by_pieces_d::move_by_pieces_d): Set m_op to MOVE_BY_PIECES.
>> 	(store_by_pieces_d::store_by_pieces_d): Set m_op with the op.
>> 	(can_store_by_pieces): Pass the type of by pieces operations to
>> 	widest_fixed_size_mode_for_size.
>> 	(clear_by_pieces): Initialize class store_by_pieces_d with
>> 	CLEAR_BY_PIECES.
>> 	(compare_by_pieces_d::compare_by_pieces_d): Set m_op to
>> 	COMPARE_BY_PIECES.
> 
> OK, thanks.  And thanks for your patience.
> 
> Richard
> 
>> patch.diff
>> diff --git a/gcc/expr.cc b/gcc/expr.cc
>> index 2c9930ec674..ad5f9dd8ec2 100644
>> --- a/gcc/expr.cc
>> +++ b/gcc/expr.cc
>> @@ -988,18 +988,44 @@ alignment_for_piecewise_move (unsigned int max_pieces, unsigned int align)
>>    return align;
>>  }
>>
>> -/* Return the widest QI vector, if QI_MODE is true, or integer mode
>> -   that is narrower than SIZE bytes.  */
>> +/* Return true if we know how to implement OP using vectors of bytes.  */
>> +static bool
>> +can_use_qi_vectors (by_pieces_operation op)
>> +{
>> +  return (op == COMPARE_BY_PIECES
>> +	  || op == SET_BY_PIECES
>> +	  || op == CLEAR_BY_PIECES);
>> +}
>> +
>> +/* Return true if optabs exists for the mode and certain by pieces
>> +   operations.  */
>> +static bool
>> +qi_vector_mode_supported_p (fixed_size_mode mode, by_pieces_operation op)
>> +{
>> +  if ((op == SET_BY_PIECES || op == CLEAR_BY_PIECES)
>> +      && optab_handler (vec_duplicate_optab, mode) != CODE_FOR_nothing)
>> +    return true;
>> +
>> +  if (op == COMPARE_BY_PIECES
>> +      && optab_handler (mov_optab, mode) != CODE_FOR_nothing
>> +      && can_compare_p (EQ, mode, ccp_jump))
>> +    return true;
>>
>> +  return false;
>> +}
>> +
>> +/* Return the widest mode that can be used to perform part of an
>> +   operation OP on SIZE bytes.  Try to use QI vector modes where
>> +   possible.  */
>>  static fixed_size_mode
>> -widest_fixed_size_mode_for_size (unsigned int size, bool qi_vector)
>> +widest_fixed_size_mode_for_size (unsigned int size, by_pieces_operation op)
>>  {
>>    fixed_size_mode result = NARROWEST_INT_MODE;
>>
>>    gcc_checking_assert (size > 1);
>>
>>    /* Use QI vector only if size is wider than a WORD.  */
>> -  if (qi_vector && size > UNITS_PER_WORD)
>> +  if (can_use_qi_vectors (op) && size > UNITS_PER_WORD)
>>      {
>>        machine_mode mode;
>>        fixed_size_mode candidate;
>> @@ -1009,8 +1035,7 @@ widest_fixed_size_mode_for_size (unsigned int size, bool qi_vector)
>>  	  {
>>  	    if (GET_MODE_SIZE (candidate) >= size)
>>  	      break;
>> -	    if (optab_handler (vec_duplicate_optab, candidate)
>> -		!= CODE_FOR_nothing)
>> +	    if (qi_vector_mode_supported_p (candidate, op))
>>  	      result = candidate;
>>  	  }
>>
>> @@ -1019,9 +1044,14 @@ widest_fixed_size_mode_for_size (unsigned int size, bool qi_vector)
>>      }
>>
>>    opt_scalar_int_mode tmode;
>> +  scalar_int_mode mode;
>>    FOR_EACH_MODE_IN_CLASS (tmode, MODE_INT)
>> -    if (GET_MODE_SIZE (tmode.require ()) < size)
>> -      result = tmode.require ();
>> +    {
>> +      mode = tmode.require ();
>> +      if (GET_MODE_SIZE (mode) < size
>> +	  && targetm.scalar_mode_supported_p (mode))
>> +      result = mode;
>> +    }
>>
>>    return result;
>>  }
>> @@ -1061,8 +1091,7 @@ by_pieces_ninsns (unsigned HOST_WIDE_INT l, unsigned int align,
>>      {
>>        /* NB: Round up L and ALIGN to the widest integer mode for
>>  	 MAX_SIZE.  */
>> -      mode = widest_fixed_size_mode_for_size (max_size,
>> -					      op == SET_BY_PIECES);
>> +      mode = widest_fixed_size_mode_for_size (max_size, op);
>>        if (optab_handler (mov_optab, mode) != CODE_FOR_nothing)
>>  	{
>>  	  unsigned HOST_WIDE_INT up = ROUND_UP (l, GET_MODE_SIZE (mode));
>> @@ -1076,8 +1105,7 @@ by_pieces_ninsns (unsigned HOST_WIDE_INT l, unsigned int align,
>>
>>    while (max_size > 1 && l > 0)
>>      {
>> -      mode = widest_fixed_size_mode_for_size (max_size,
>> -					      op == SET_BY_PIECES);
>> +      mode = widest_fixed_size_mode_for_size (max_size, op);
>>        enum insn_code icode;
>>
>>        unsigned int modesize = GET_MODE_SIZE (mode);
>> @@ -1317,8 +1345,8 @@ class op_by_pieces_d
>>    bool m_push;
>>    /* True if targetm.overlap_op_by_pieces_p () returns true.  */
>>    bool m_overlap_op_by_pieces;
>> -  /* True if QI vector mode can be used.  */
>> -  bool m_qi_vector_mode;
>> +  /* The type of operation that we're performing.  */
>> +  by_pieces_operation m_op;
>>
>>    /* Virtual functions, overriden by derived classes for the specific
>>       operation.  */
>> @@ -1331,7 +1359,7 @@ class op_by_pieces_d
>>   public:
>>    op_by_pieces_d (unsigned int, rtx, bool, rtx, bool, by_pieces_constfn,
>>  		  void *, unsigned HOST_WIDE_INT, unsigned int, bool,
>> -		  bool = false);
>> +		  by_pieces_operation);
>>    void run ();
>>  };
>>
>> @@ -1349,11 +1377,11 @@ op_by_pieces_d::op_by_pieces_d (unsigned int max_pieces, rtx to,
>>  				void *from_cfn_data,
>>  				unsigned HOST_WIDE_INT len,
>>  				unsigned int align, bool push,
>> -				bool qi_vector_mode)
>> +				by_pieces_operation op)
>>    : m_to (to, to_load, NULL, NULL),
>>      m_from (from, from_load, from_cfn, from_cfn_data),
>>      m_len (len), m_max_size (max_pieces + 1),
>> -    m_push (push), m_qi_vector_mode (qi_vector_mode)
>> +    m_push (push), m_op (op)
>>  {
>>    int toi = m_to.get_addr_inc ();
>>    int fromi = m_from.get_addr_inc ();
>> @@ -1375,8 +1403,7 @@ op_by_pieces_d::op_by_pieces_d (unsigned int max_pieces, rtx to,
>>      {
>>        /* Find the mode of the largest comparison.  */
>>        fixed_size_mode mode
>> -	= widest_fixed_size_mode_for_size (m_max_size,
>> -					   m_qi_vector_mode);
>> +	= widest_fixed_size_mode_for_size (m_max_size, m_op);
>>
>>        m_from.decide_autoinc (mode, m_reverse, len);
>>        m_to.decide_autoinc (mode, m_reverse, len);
>> @@ -1401,7 +1428,7 @@ op_by_pieces_d::get_usable_mode (fixed_size_mode mode, unsigned int len)
>>        if (len >= size && prepare_mode (mode, m_align))
>>  	break;
>>        /* widest_fixed_size_mode_for_size checks SIZE > 1.  */
>> -      mode = widest_fixed_size_mode_for_size (size, m_qi_vector_mode);
>> +      mode = widest_fixed_size_mode_for_size (size, m_op);
>>      }
>>    while (1);
>>    return mode;
>> @@ -1414,7 +1441,7 @@ fixed_size_mode
>>  op_by_pieces_d::smallest_fixed_size_mode_for_size (unsigned int size)
>>  {
>>    /* Use QI vector only for > size of WORD.  */
>> -  if (m_qi_vector_mode && size > UNITS_PER_WORD)
>> +  if (can_use_qi_vectors (m_op) && size > UNITS_PER_WORD)
>>      {
>>        machine_mode mode;
>>        fixed_size_mode candidate;
>> @@ -1427,8 +1454,7 @@ op_by_pieces_d::smallest_fixed_size_mode_for_size (unsigned int size)
>>  	      break;
>>
>>  	    if (GET_MODE_SIZE (candidate) >= size
>> -		&& (optab_handler (vec_duplicate_optab, candidate)
>> -		    != CODE_FOR_nothing))
>> +		&& qi_vector_mode_supported_p (candidate, m_op))
>>  	      return candidate;
>>  	  }
>>      }
>> @@ -1451,7 +1477,7 @@ op_by_pieces_d::run ()
>>
>>    /* widest_fixed_size_mode_for_size checks M_MAX_SIZE > 1.  */
>>    fixed_size_mode mode
>> -    = widest_fixed_size_mode_for_size (m_max_size, m_qi_vector_mode);
>> +    = widest_fixed_size_mode_for_size (m_max_size, m_op);
>>    mode = get_usable_mode (mode, length);
>>
>>    by_pieces_prev to_prev = { nullptr, mode };
>> @@ -1516,8 +1542,7 @@ op_by_pieces_d::run ()
>>        else
>>  	{
>>  	  /* widest_fixed_size_mode_for_size checks SIZE > 1.  */
>> -	  mode = widest_fixed_size_mode_for_size (size,
>> -						  m_qi_vector_mode);
>> +	  mode = widest_fixed_size_mode_for_size (size, m_op);
>>  	  mode = get_usable_mode (mode, length);
>>  	}
>>      }
>> @@ -1543,7 +1568,7 @@ class move_by_pieces_d : public op_by_pieces_d
>>    move_by_pieces_d (rtx to, rtx from, unsigned HOST_WIDE_INT len,
>>  		    unsigned int align)
>>      : op_by_pieces_d (MOVE_MAX_PIECES, to, false, from, true, NULL,
>> -		      NULL, len, align, PUSHG_P (to))
>> +		      NULL, len, align, PUSHG_P (to), MOVE_BY_PIECES)
>>    {
>>    }
>>    rtx finish_retmode (memop_ret);
>> @@ -1632,15 +1657,16 @@ move_by_pieces (rtx to, rtx from, unsigned HOST_WIDE_INT len,
>>  class store_by_pieces_d : public op_by_pieces_d
>>  {
>>    insn_gen_fn m_gen_fun;
>> +
>>    void generate (rtx, rtx, machine_mode) final override;
>>    bool prepare_mode (machine_mode, unsigned int) final override;
>>
>>   public:
>>    store_by_pieces_d (rtx to, by_pieces_constfn cfn, void *cfn_data,
>>  		     unsigned HOST_WIDE_INT len, unsigned int align,
>> -		     bool qi_vector_mode)
>> +		     by_pieces_operation op)
>>      : op_by_pieces_d (STORE_MAX_PIECES, to, false, NULL_RTX, true, cfn,
>> -		      cfn_data, len, align, false, qi_vector_mode)
>> +		      cfn_data, len, align, false, op)
>>    {
>>    }
>>    rtx finish_retmode (memop_ret);
>> @@ -1729,8 +1755,8 @@ can_store_by_pieces (unsigned HOST_WIDE_INT len,
>>        max_size = STORE_MAX_PIECES + 1;
>>        while (max_size > 1 && l > 0)
>>  	{
>> -	  fixed_size_mode mode
>> -	    = widest_fixed_size_mode_for_size (max_size, memsetp);
>> +	  auto op = memsetp ? SET_BY_PIECES : STORE_BY_PIECES;
>> +	  auto mode = widest_fixed_size_mode_for_size (max_size, op);
>>
>>  	  icode = optab_handler (mov_optab, mode);
>>  	  if (icode != CODE_FOR_nothing
>> @@ -1793,7 +1819,7 @@ store_by_pieces (rtx to, unsigned HOST_WIDE_INT len,
>>  		 optimize_insn_for_speed_p ()));
>>
>>    store_by_pieces_d data (to, constfun, constfundata, len, align,
>> -			  memsetp);
>> +			  memsetp ? SET_BY_PIECES : STORE_BY_PIECES);
>>    data.run ();
>>
>>    if (retmode != RETURN_BEGIN)
>> @@ -1814,7 +1840,7 @@ clear_by_pieces (rtx to, unsigned HOST_WIDE_INT len, unsigned int align)
>>    /* Use builtin_memset_read_str to support vector mode broadcast.  */
>>    char c = 0;
>>    store_by_pieces_d data (to, builtin_memset_read_str, &c, len, align,
>> -			  true);
>> +			  CLEAR_BY_PIECES);
>>    data.run ();
>>  }
>>
>> @@ -1832,12 +1858,13 @@ class compare_by_pieces_d : public op_by_pieces_d
>>    void generate (rtx, rtx, machine_mode) final override;
>>    bool prepare_mode (machine_mode, unsigned int) final override;
>>    void finish_mode (machine_mode) final override;
>> +
>>   public:
>>    compare_by_pieces_d (rtx op0, rtx op1, by_pieces_constfn op1_cfn,
>>  		       void *op1_cfn_data, HOST_WIDE_INT len, int align,
>>  		       rtx_code_label *fail_label)
>>      : op_by_pieces_d (COMPARE_MAX_PIECES, op0, true, op1, true, op1_cfn,
>> -		      op1_cfn_data, len, align, false)
>> +		      op1_cfn_data, len, align, false, COMPARE_BY_PIECES)
>>    {
>>      m_fail_label = fail_label;
>>    }
  

Hi Haochen Gui,

It seems that the commit caused lots of test case fail on x86 platforms:

https://gcc.gnu.org/pipermail/gcc-regression/2023-October/078379.html
https://gcc.gnu.org/pipermail/gcc-regression/2023-October/078380.html
https://gcc.gnu.org/pipermail/gcc-regression/2023-October/078381.html
https://gcc.gnu.org/pipermail/gcc-regression/2023-October/078382.html
https://gcc.gnu.org/pipermail/gcc-regression/2023-October/078383.html
https://gcc.gnu.org/pipermail/gcc-regression/2023-October/078384.html

Please help verify that if we need some testcase change or we get bug here.

A simple reproducer under build folder is:

make check RUNTESTFLAGS="i386.exp=g++.target/i386/pr80566-2.C --target_board='unix{-m64\ -march=cascadelake,-m32\ -march=cascadelake,-m32,-m64}'"

Thx,
Haochen

> -----Original Message-----
> From: HAO CHEN GUI <guihaoc@linux.ibm.com>
> Sent: Monday, October 23, 2023 9:30 AM
> To: Richard Sandiford <richard.sandiford@arm.com>
> Cc: gcc-patches <gcc-patches@gcc.gnu.org>
> Subject: Re: [PATCH-1v4, expand] Enable vector mode for compare_by_pieces
> [PR111449]
> 
> Committed as r14-4835.
> 
> https://gcc.gnu.org/g:f08ca5903c7a02b450b93143467f70b9fd8e0085
> 
> Thanks
> Gui Haochen
> 
> 在 2023/10/20 16:49, Richard Sandiford 写道:
> > HAO CHEN GUI <guihaoc@linux.ibm.com> writes:
> >> Hi,
> >>   Vector mode instructions are efficient for compare on some targets.
> >> This patch enables vector mode for compare_by_pieces. Two help
> >> functions are added to check if vector mode is available for certain
> >> by pieces operations and if if optabs exists for the mode and certain
> >> by pieces operations. One member is added in class op_by_pieces_d to
> >> record the type of operations.
> >>
> >>   The test case is in the second patch which is rs6000 specific.
> >>
> >>   Compared to last version, the main change is to add a target hook
> >> check - scalar_mode_supported_p when retrieving the available scalar
> >> modes. The mode which is not supported for a target should be skipped.
> >> (e.g. TImode on ppc). Also some function names and comments are refined
> >> according to reviewer's advice.
> >>
> >>   Bootstrapped and tested on x86 and powerpc64-linux BE and LE with no
> >> regressions.
> >>
> >> Thanks
> >> Gui Haochen
> >>
> >> ChangeLog
> >> Expand: Enable vector mode for by pieces compares
> >>
> >> Vector mode compare instructions are efficient for equality compare on
> >> rs6000. This patch refactors the codes of by pieces operation to enable
> >> vector mode for compare.
> >>
> >> gcc/
> >> 	PR target/111449
> >> 	* expr.cc (can_use_qi_vectors): New function to return true if
> >> 	we know how to implement OP using vectors of bytes.
> >> 	(qi_vector_mode_supported_p): New function to check if optabs
> >> 	exists for the mode and certain by pieces operations.
> >> 	(widest_fixed_size_mode_for_size): Replace the second argument
> >> 	with the type of by pieces operations.  Call can_use_qi_vectors
> >> 	and qi_vector_mode_supported_p to do the check.  Call
> >> 	scalar_mode_supported_p to check if the scalar mode is supported.
> >> 	(by_pieces_ninsns): Pass the type of by pieces operation to
> >> 	widest_fixed_size_mode_for_size.
> >> 	(class op_by_pieces_d): Remove m_qi_vector_mode.  Add m_op to
> >> 	record the type of by pieces operations.
> >> 	(op_by_pieces_d::op_by_pieces_d): Change last argument to the
> >> 	type of by pieces operations, initialize m_op with it.  Pass
> >> 	m_op to function widest_fixed_size_mode_for_size.
> >> 	(op_by_pieces_d::get_usable_mode): Pass m_op to function
> >> 	widest_fixed_size_mode_for_size.
> >> 	(op_by_pieces_d::smallest_fixed_size_mode_for_size): Call
> >> 	can_use_qi_vectors and qi_vector_mode_supported_p to do the
> >> 	check.
> >> 	(op_by_pieces_d::run): Pass m_op to function
> >> 	widest_fixed_size_mode_for_size.
> >> 	(move_by_pieces_d::move_by_pieces_d): Set m_op to
> MOVE_BY_PIECES.
> >> 	(store_by_pieces_d::store_by_pieces_d): Set m_op with the op.
> >> 	(can_store_by_pieces): Pass the type of by pieces operations to
> >> 	widest_fixed_size_mode_for_size.
> >> 	(clear_by_pieces): Initialize class store_by_pieces_d with
> >> 	CLEAR_BY_PIECES.
> >> 	(compare_by_pieces_d::compare_by_pieces_d): Set m_op to
> >> 	COMPARE_BY_PIECES.
> >
> > OK, thanks.  And thanks for your patience.
> >
> > Richard
> >
> >> patch.diff
> >> diff --git a/gcc/expr.cc b/gcc/expr.cc
> >> index 2c9930ec674..ad5f9dd8ec2 100644
> >> --- a/gcc/expr.cc
> >> +++ b/gcc/expr.cc
> >> @@ -988,18 +988,44 @@ alignment_for_piecewise_move (unsigned int
> max_pieces, unsigned int align)
> >>    return align;
> >>  }
> >>
> >> -/* Return the widest QI vector, if QI_MODE is true, or integer mode
> >> -   that is narrower than SIZE bytes.  */
> >> +/* Return true if we know how to implement OP using vectors of bytes.  */
> >> +static bool
> >> +can_use_qi_vectors (by_pieces_operation op)
> >> +{
> >> +  return (op == COMPARE_BY_PIECES
> >> +	  || op == SET_BY_PIECES
> >> +	  || op == CLEAR_BY_PIECES);
> >> +}
> >> +
> >> +/* Return true if optabs exists for the mode and certain by pieces
> >> +   operations.  */
> >> +static bool
> >> +qi_vector_mode_supported_p (fixed_size_mode mode,
> by_pieces_operation op)
> >> +{
> >> +  if ((op == SET_BY_PIECES || op == CLEAR_BY_PIECES)
> >> +      && optab_handler (vec_duplicate_optab, mode) !=
> CODE_FOR_nothing)
> >> +    return true;
> >> +
> >> +  if (op == COMPARE_BY_PIECES
> >> +      && optab_handler (mov_optab, mode) != CODE_FOR_nothing
> >> +      && can_compare_p (EQ, mode, ccp_jump))
> >> +    return true;
> >>
> >> +  return false;
> >> +}
> >> +
> >> +/* Return the widest mode that can be used to perform part of an
> >> +   operation OP on SIZE bytes.  Try to use QI vector modes where
> >> +   possible.  */
> >>  static fixed_size_mode
> >> -widest_fixed_size_mode_for_size (unsigned int size, bool qi_vector)
> >> +widest_fixed_size_mode_for_size (unsigned int size, by_pieces_operation
> op)
> >>  {
> >>    fixed_size_mode result = NARROWEST_INT_MODE;
> >>
> >>    gcc_checking_assert (size > 1);
> >>
> >>    /* Use QI vector only if size is wider than a WORD.  */
> >> -  if (qi_vector && size > UNITS_PER_WORD)
> >> +  if (can_use_qi_vectors (op) && size > UNITS_PER_WORD)
> >>      {
> >>        machine_mode mode;
> >>        fixed_size_mode candidate;
> >> @@ -1009,8 +1035,7 @@ widest_fixed_size_mode_for_size (unsigned int
> size, bool qi_vector)
> >>  	  {
> >>  	    if (GET_MODE_SIZE (candidate) >= size)
> >>  	      break;
> >> -	    if (optab_handler (vec_duplicate_optab, candidate)
> >> -		!= CODE_FOR_nothing)
> >> +	    if (qi_vector_mode_supported_p (candidate, op))
> >>  	      result = candidate;
> >>  	  }
> >>
> >> @@ -1019,9 +1044,14 @@ widest_fixed_size_mode_for_size (unsigned
> int size, bool qi_vector)
> >>      }
> >>
> >>    opt_scalar_int_mode tmode;
> >> +  scalar_int_mode mode;
> >>    FOR_EACH_MODE_IN_CLASS (tmode, MODE_INT)
> >> -    if (GET_MODE_SIZE (tmode.require ()) < size)
> >> -      result = tmode.require ();
> >> +    {
> >> +      mode = tmode.require ();
> >> +      if (GET_MODE_SIZE (mode) < size
> >> +	  && targetm.scalar_mode_supported_p (mode))
> >> +      result = mode;
> >> +    }
> >>
> >>    return result;
> >>  }
> >> @@ -1061,8 +1091,7 @@ by_pieces_ninsns (unsigned HOST_WIDE_INT l,
> unsigned int align,
> >>      {
> >>        /* NB: Round up L and ALIGN to the widest integer mode for
> >>  	 MAX_SIZE.  */
> >> -      mode = widest_fixed_size_mode_for_size (max_size,
> >> -					      op == SET_BY_PIECES);
> >> +      mode = widest_fixed_size_mode_for_size (max_size, op);
> >>        if (optab_handler (mov_optab, mode) != CODE_FOR_nothing)
> >>  	{
> >>  	  unsigned HOST_WIDE_INT up = ROUND_UP (l, GET_MODE_SIZE
> (mode));
> >> @@ -1076,8 +1105,7 @@ by_pieces_ninsns (unsigned HOST_WIDE_INT l,
> unsigned int align,
> >>
> >>    while (max_size > 1 && l > 0)
> >>      {
> >> -      mode = widest_fixed_size_mode_for_size (max_size,
> >> -					      op == SET_BY_PIECES);
> >> +      mode = widest_fixed_size_mode_for_size (max_size, op);
> >>        enum insn_code icode;
> >>
> >>        unsigned int modesize = GET_MODE_SIZE (mode);
> >> @@ -1317,8 +1345,8 @@ class op_by_pieces_d
> >>    bool m_push;
> >>    /* True if targetm.overlap_op_by_pieces_p () returns true.  */
> >>    bool m_overlap_op_by_pieces;
> >> -  /* True if QI vector mode can be used.  */
> >> -  bool m_qi_vector_mode;
> >> +  /* The type of operation that we're performing.  */
> >> +  by_pieces_operation m_op;
> >>
> >>    /* Virtual functions, overriden by derived classes for the specific
> >>       operation.  */
> >> @@ -1331,7 +1359,7 @@ class op_by_pieces_d
> >>   public:
> >>    op_by_pieces_d (unsigned int, rtx, bool, rtx, bool, by_pieces_constfn,
> >>  		  void *, unsigned HOST_WIDE_INT, unsigned int, bool,
> >> -		  bool = false);
> >> +		  by_pieces_operation);
> >>    void run ();
> >>  };
> >>
> >> @@ -1349,11 +1377,11 @@ op_by_pieces_d::op_by_pieces_d (unsigned
> int max_pieces, rtx to,
> >>  				void *from_cfn_data,
> >>  				unsigned HOST_WIDE_INT len,
> >>  				unsigned int align, bool push,
> >> -				bool qi_vector_mode)
> >> +				by_pieces_operation op)
> >>    : m_to (to, to_load, NULL, NULL),
> >>      m_from (from, from_load, from_cfn, from_cfn_data),
> >>      m_len (len), m_max_size (max_pieces + 1),
> >> -    m_push (push), m_qi_vector_mode (qi_vector_mode)
> >> +    m_push (push), m_op (op)
> >>  {
> >>    int toi = m_to.get_addr_inc ();
> >>    int fromi = m_from.get_addr_inc ();
> >> @@ -1375,8 +1403,7 @@ op_by_pieces_d::op_by_pieces_d (unsigned int
> max_pieces, rtx to,
> >>      {
> >>        /* Find the mode of the largest comparison.  */
> >>        fixed_size_mode mode
> >> -	= widest_fixed_size_mode_for_size (m_max_size,
> >> -					   m_qi_vector_mode);
> >> +	= widest_fixed_size_mode_for_size (m_max_size, m_op);
> >>
> >>        m_from.decide_autoinc (mode, m_reverse, len);
> >>        m_to.decide_autoinc (mode, m_reverse, len);
> >> @@ -1401,7 +1428,7 @@ op_by_pieces_d::get_usable_mode
> (fixed_size_mode mode, unsigned int len)
> >>        if (len >= size && prepare_mode (mode, m_align))
> >>  	break;
> >>        /* widest_fixed_size_mode_for_size checks SIZE > 1.  */
> >> -      mode = widest_fixed_size_mode_for_size (size, m_qi_vector_mode);
> >> +      mode = widest_fixed_size_mode_for_size (size, m_op);
> >>      }
> >>    while (1);
> >>    return mode;
> >> @@ -1414,7 +1441,7 @@ fixed_size_mode
> >>  op_by_pieces_d::smallest_fixed_size_mode_for_size (unsigned int size)
> >>  {
> >>    /* Use QI vector only for > size of WORD.  */
> >> -  if (m_qi_vector_mode && size > UNITS_PER_WORD)
> >> +  if (can_use_qi_vectors (m_op) && size > UNITS_PER_WORD)
> >>      {
> >>        machine_mode mode;
> >>        fixed_size_mode candidate;
> >> @@ -1427,8 +1454,7 @@
> op_by_pieces_d::smallest_fixed_size_mode_for_size (unsigned int size)
> >>  	      break;
> >>
> >>  	    if (GET_MODE_SIZE (candidate) >= size
> >> -		&& (optab_handler (vec_duplicate_optab, candidate)
> >> -		    != CODE_FOR_nothing))
> >> +		&& qi_vector_mode_supported_p (candidate, m_op))
> >>  	      return candidate;
> >>  	  }
> >>      }
> >> @@ -1451,7 +1477,7 @@ op_by_pieces_d::run ()
> >>
> >>    /* widest_fixed_size_mode_for_size checks M_MAX_SIZE > 1.  */
> >>    fixed_size_mode mode
> >> -    = widest_fixed_size_mode_for_size (m_max_size, m_qi_vector_mode);
> >> +    = widest_fixed_size_mode_for_size (m_max_size, m_op);
> >>    mode = get_usable_mode (mode, length);
> >>
> >>    by_pieces_prev to_prev = { nullptr, mode };
> >> @@ -1516,8 +1542,7 @@ op_by_pieces_d::run ()
> >>        else
> >>  	{
> >>  	  /* widest_fixed_size_mode_for_size checks SIZE > 1.  */
> >> -	  mode = widest_fixed_size_mode_for_size (size,
> >> -						  m_qi_vector_mode);
> >> +	  mode = widest_fixed_size_mode_for_size (size, m_op);
> >>  	  mode = get_usable_mode (mode, length);
> >>  	}
> >>      }
> >> @@ -1543,7 +1568,7 @@ class move_by_pieces_d : public
> op_by_pieces_d
> >>    move_by_pieces_d (rtx to, rtx from, unsigned HOST_WIDE_INT len,
> >>  		    unsigned int align)
> >>      : op_by_pieces_d (MOVE_MAX_PIECES, to, false, from, true, NULL,
> >> -		      NULL, len, align, PUSHG_P (to))
> >> +		      NULL, len, align, PUSHG_P (to), MOVE_BY_PIECES)
> >>    {
> >>    }
> >>    rtx finish_retmode (memop_ret);
> >> @@ -1632,15 +1657,16 @@ move_by_pieces (rtx to, rtx from, unsigned
> HOST_WIDE_INT len,
> >>  class store_by_pieces_d : public op_by_pieces_d
> >>  {
> >>    insn_gen_fn m_gen_fun;
> >> +
> >>    void generate (rtx, rtx, machine_mode) final override;
> >>    bool prepare_mode (machine_mode, unsigned int) final override;
> >>
> >>   public:
> >>    store_by_pieces_d (rtx to, by_pieces_constfn cfn, void *cfn_data,
> >>  		     unsigned HOST_WIDE_INT len, unsigned int align,
> >> -		     bool qi_vector_mode)
> >> +		     by_pieces_operation op)
> >>      : op_by_pieces_d (STORE_MAX_PIECES, to, false, NULL_RTX, true, cfn,
> >> -		      cfn_data, len, align, false, qi_vector_mode)
> >> +		      cfn_data, len, align, false, op)
> >>    {
> >>    }
> >>    rtx finish_retmode (memop_ret);
> >> @@ -1729,8 +1755,8 @@ can_store_by_pieces (unsigned
> HOST_WIDE_INT len,
> >>        max_size = STORE_MAX_PIECES + 1;
> >>        while (max_size > 1 && l > 0)
> >>  	{
> >> -	  fixed_size_mode mode
> >> -	    = widest_fixed_size_mode_for_size (max_size, memsetp);
> >> +	  auto op = memsetp ? SET_BY_PIECES : STORE_BY_PIECES;
> >> +	  auto mode = widest_fixed_size_mode_for_size (max_size, op);
> >>
> >>  	  icode = optab_handler (mov_optab, mode);
> >>  	  if (icode != CODE_FOR_nothing
> >> @@ -1793,7 +1819,7 @@ store_by_pieces (rtx to, unsigned
> HOST_WIDE_INT len,
> >>  		 optimize_insn_for_speed_p ()));
> >>
> >>    store_by_pieces_d data (to, constfun, constfundata, len, align,
> >> -			  memsetp);
> >> +			  memsetp ? SET_BY_PIECES : STORE_BY_PIECES);
> >>    data.run ();
> >>
> >>    if (retmode != RETURN_BEGIN)
> >> @@ -1814,7 +1840,7 @@ clear_by_pieces (rtx to, unsigned
> HOST_WIDE_INT len, unsigned int align)
> >>    /* Use builtin_memset_read_str to support vector mode broadcast.  */
> >>    char c = 0;
> >>    store_by_pieces_d data (to, builtin_memset_read_str, &c, len, align,
> >> -			  true);
> >> +			  CLEAR_BY_PIECES);
> >>    data.run ();
> >>  }
> >>
> >> @@ -1832,12 +1858,13 @@ class compare_by_pieces_d : public
> op_by_pieces_d
> >>    void generate (rtx, rtx, machine_mode) final override;
> >>    bool prepare_mode (machine_mode, unsigned int) final override;
> >>    void finish_mode (machine_mode) final override;
> >> +
> >>   public:
> >>    compare_by_pieces_d (rtx op0, rtx op1, by_pieces_constfn op1_cfn,
> >>  		       void *op1_cfn_data, HOST_WIDE_INT len, int align,
> >>  		       rtx_code_label *fail_label)
> >>      : op_by_pieces_d (COMPARE_MAX_PIECES, op0, true, op1, true,
> op1_cfn,
> >> -		      op1_cfn_data, len, align, false)
> >> +		      op1_cfn_data, len, align, false, COMPARE_BY_PIECES)
> >>    {
> >>      m_fail_label = fail_label;
> >>    }
  

It seems that the mail got caught elsewhere and did not send into gcc-patches
mailing thread. Resending that.

Thx,
Haochen

-----Original Message-----
From: Jiang, Haochen 
Sent: Tuesday, October 24, 2023 4:43 PM
To: HAO CHEN GUI <guihaoc@linux.ibm.com>; Richard Sandiford <richard.sandiford@arm.com>
Cc: gcc-patches <gcc-patches@gcc.gnu.org>
Subject: RE: [PATCH-1v4, expand] Enable vector mode for compare_by_pieces [PR111449]

Hi Haochen Gui,

It seems that the commit caused lots of test case fail on x86 platforms:

https://gcc.gnu.org/pipermail/gcc-regression/2023-October/078379.html
https://gcc.gnu.org/pipermail/gcc-regression/2023-October/078380.html
https://gcc.gnu.org/pipermail/gcc-regression/2023-October/078381.html
https://gcc.gnu.org/pipermail/gcc-regression/2023-October/078382.html
https://gcc.gnu.org/pipermail/gcc-regression/2023-October/078383.html
https://gcc.gnu.org/pipermail/gcc-regression/2023-October/078384.html

Please help verify that if we need some testcase change or we get bug here.

A simple reproducer under build folder is:

make check RUNTESTFLAGS="i386.exp=g++.target/i386/pr80566-2.C --target_board='unix{-m64\ -march=cascadelake,-m32\ -march=cascadelake,-m32,-m64}'"

Thx,
Haochen

> -----Original Message-----
> From: HAO CHEN GUI <guihaoc@linux.ibm.com>
> Sent: Monday, October 23, 2023 9:30 AM
> To: Richard Sandiford <richard.sandiford@arm.com>
> Cc: gcc-patches <gcc-patches@gcc.gnu.org>
> Subject: Re: [PATCH-1v4, expand] Enable vector mode for 
> compare_by_pieces [PR111449]
> 
> Committed as r14-4835.
> 
> https://gcc.gnu.org/g:f08ca5903c7a02b450b93143467f70b9fd8e0085
> 
> Thanks
> Gui Haochen
> 
> 在 2023/10/20 16:49, Richard Sandiford 写道:
> > HAO CHEN GUI <guihaoc@linux.ibm.com> writes:
> >> Hi,
> >>   Vector mode instructions are efficient for compare on some targets.
> >> This patch enables vector mode for compare_by_pieces. Two help 
> >> functions are added to check if vector mode is available for 
> >> certain by pieces operations and if if optabs exists for the mode 
> >> and certain by pieces operations. One member is added in class 
> >> op_by_pieces_d to record the type of operations.
> >>
> >>   The test case is in the second patch which is rs6000 specific.
> >>
> >>   Compared to last version, the main change is to add a target hook 
> >> check - scalar_mode_supported_p when retrieving the available 
> >> scalar modes. The mode which is not supported for a target should be skipped.
> >> (e.g. TImode on ppc). Also some function names and comments are 
> >> refined according to reviewer's advice.
> >>
> >>   Bootstrapped and tested on x86 and powerpc64-linux BE and LE with 
> >> no regressions.
> >>
> >> Thanks
> >> Gui Haochen
> >>
> >> ChangeLog
> >> Expand: Enable vector mode for by pieces compares
> >>
> >> Vector mode compare instructions are efficient for equality compare 
> >> on rs6000. This patch refactors the codes of by pieces operation to 
> >> enable vector mode for compare.
> >>
> >> gcc/
> >> 	PR target/111449
> >> 	* expr.cc (can_use_qi_vectors): New function to return true if
> >> 	we know how to implement OP using vectors of bytes.
> >> 	(qi_vector_mode_supported_p): New function to check if optabs
> >> 	exists for the mode and certain by pieces operations.
> >> 	(widest_fixed_size_mode_for_size): Replace the second argument
> >> 	with the type of by pieces operations.  Call can_use_qi_vectors
> >> 	and qi_vector_mode_supported_p to do the check.  Call
> >> 	scalar_mode_supported_p to check if the scalar mode is supported.
> >> 	(by_pieces_ninsns): Pass the type of by pieces operation to
> >> 	widest_fixed_size_mode_for_size.
> >> 	(class op_by_pieces_d): Remove m_qi_vector_mode.  Add m_op to
> >> 	record the type of by pieces operations.
> >> 	(op_by_pieces_d::op_by_pieces_d): Change last argument to the
> >> 	type of by pieces operations, initialize m_op with it.  Pass
> >> 	m_op to function widest_fixed_size_mode_for_size.
> >> 	(op_by_pieces_d::get_usable_mode): Pass m_op to function
> >> 	widest_fixed_size_mode_for_size.
> >> 	(op_by_pieces_d::smallest_fixed_size_mode_for_size): Call
> >> 	can_use_qi_vectors and qi_vector_mode_supported_p to do the
> >> 	check.
> >> 	(op_by_pieces_d::run): Pass m_op to function
> >> 	widest_fixed_size_mode_for_size.
> >> 	(move_by_pieces_d::move_by_pieces_d): Set m_op to
> MOVE_BY_PIECES.
> >> 	(store_by_pieces_d::store_by_pieces_d): Set m_op with the op.
> >> 	(can_store_by_pieces): Pass the type of by pieces operations to
> >> 	widest_fixed_size_mode_for_size.
> >> 	(clear_by_pieces): Initialize class store_by_pieces_d with
> >> 	CLEAR_BY_PIECES.
> >> 	(compare_by_pieces_d::compare_by_pieces_d): Set m_op to
> >> 	COMPARE_BY_PIECES.
> >
> > OK, thanks.  And thanks for your patience.
> >
> > Richard
> >
> >> patch.diff
> >> diff --git a/gcc/expr.cc b/gcc/expr.cc index 
> >> 2c9930ec674..ad5f9dd8ec2 100644
> >> --- a/gcc/expr.cc
> >> +++ b/gcc/expr.cc
> >> @@ -988,18 +988,44 @@ alignment_for_piecewise_move (unsigned int
> max_pieces, unsigned int align)
> >>    return align;
> >>  }
> >>
> >> -/* Return the widest QI vector, if QI_MODE is true, or integer mode
> >> -   that is narrower than SIZE bytes.  */
> >> +/* Return true if we know how to implement OP using vectors of 
> >> +bytes.  */ static bool can_use_qi_vectors (by_pieces_operation op) 
> >> +{
> >> +  return (op == COMPARE_BY_PIECES
> >> +	  || op == SET_BY_PIECES
> >> +	  || op == CLEAR_BY_PIECES);
> >> +}
> >> +
> >> +/* Return true if optabs exists for the mode and certain by pieces
> >> +   operations.  */
> >> +static bool
> >> +qi_vector_mode_supported_p (fixed_size_mode mode,
> by_pieces_operation op)
> >> +{
> >> +  if ((op == SET_BY_PIECES || op == CLEAR_BY_PIECES)
> >> +      && optab_handler (vec_duplicate_optab, mode) !=
> CODE_FOR_nothing)
> >> +    return true;
> >> +
> >> +  if (op == COMPARE_BY_PIECES
> >> +      && optab_handler (mov_optab, mode) != CODE_FOR_nothing
> >> +      && can_compare_p (EQ, mode, ccp_jump))
> >> +    return true;
> >>
> >> +  return false;
> >> +}
> >> +
> >> +/* Return the widest mode that can be used to perform part of an
> >> +   operation OP on SIZE bytes.  Try to use QI vector modes where
> >> +   possible.  */
> >>  static fixed_size_mode
> >> -widest_fixed_size_mode_for_size (unsigned int size, bool 
> >> qi_vector)
> >> +widest_fixed_size_mode_for_size (unsigned int size, 
> >> +by_pieces_operation
> op)
> >>  {
> >>    fixed_size_mode result = NARROWEST_INT_MODE;
> >>
> >>    gcc_checking_assert (size > 1);
> >>
> >>    /* Use QI vector only if size is wider than a WORD.  */
> >> -  if (qi_vector && size > UNITS_PER_WORD)
> >> +  if (can_use_qi_vectors (op) && size > UNITS_PER_WORD)
> >>      {
> >>        machine_mode mode;
> >>        fixed_size_mode candidate;
> >> @@ -1009,8 +1035,7 @@ widest_fixed_size_mode_for_size (unsigned int
> size, bool qi_vector)
> >>  	  {
> >>  	    if (GET_MODE_SIZE (candidate) >= size)
> >>  	      break;
> >> -	    if (optab_handler (vec_duplicate_optab, candidate)
> >> -		!= CODE_FOR_nothing)
> >> +	    if (qi_vector_mode_supported_p (candidate, op))
> >>  	      result = candidate;
> >>  	  }
> >>
> >> @@ -1019,9 +1044,14 @@ widest_fixed_size_mode_for_size (unsigned
> int size, bool qi_vector)
> >>      }
> >>
> >>    opt_scalar_int_mode tmode;
> >> +  scalar_int_mode mode;
> >>    FOR_EACH_MODE_IN_CLASS (tmode, MODE_INT)
> >> -    if (GET_MODE_SIZE (tmode.require ()) < size)
> >> -      result = tmode.require ();
> >> +    {
> >> +      mode = tmode.require ();
> >> +      if (GET_MODE_SIZE (mode) < size
> >> +	  && targetm.scalar_mode_supported_p (mode))
> >> +      result = mode;
> >> +    }
> >>
> >>    return result;
> >>  }
> >> @@ -1061,8 +1091,7 @@ by_pieces_ninsns (unsigned HOST_WIDE_INT l,
> unsigned int align,
> >>      {
> >>        /* NB: Round up L and ALIGN to the widest integer mode for
> >>  	 MAX_SIZE.  */
> >> -      mode = widest_fixed_size_mode_for_size (max_size,
> >> -					      op == SET_BY_PIECES);
> >> +      mode = widest_fixed_size_mode_for_size (max_size, op);
> >>        if (optab_handler (mov_optab, mode) != CODE_FOR_nothing)
> >>  	{
> >>  	  unsigned HOST_WIDE_INT up = ROUND_UP (l, GET_MODE_SIZE
> (mode));
> >> @@ -1076,8 +1105,7 @@ by_pieces_ninsns (unsigned HOST_WIDE_INT l,
> unsigned int align,
> >>
> >>    while (max_size > 1 && l > 0)
> >>      {
> >> -      mode = widest_fixed_size_mode_for_size (max_size,
> >> -					      op == SET_BY_PIECES);
> >> +      mode = widest_fixed_size_mode_for_size (max_size, op);
> >>        enum insn_code icode;
> >>
> >>        unsigned int modesize = GET_MODE_SIZE (mode); @@ -1317,8 
> >> +1345,8 @@ class op_by_pieces_d
> >>    bool m_push;
> >>    /* True if targetm.overlap_op_by_pieces_p () returns true.  */
> >>    bool m_overlap_op_by_pieces;
> >> -  /* True if QI vector mode can be used.  */
> >> -  bool m_qi_vector_mode;
> >> +  /* The type of operation that we're performing.  */  
> >> + by_pieces_operation m_op;
> >>
> >>    /* Virtual functions, overriden by derived classes for the specific
> >>       operation.  */
> >> @@ -1331,7 +1359,7 @@ class op_by_pieces_d
> >>   public:
> >>    op_by_pieces_d (unsigned int, rtx, bool, rtx, bool, by_pieces_constfn,
> >>  		  void *, unsigned HOST_WIDE_INT, unsigned int, bool,
> >> -		  bool = false);
> >> +		  by_pieces_operation);
> >>    void run ();
> >>  };
> >>
> >> @@ -1349,11 +1377,11 @@ op_by_pieces_d::op_by_pieces_d (unsigned
> int max_pieces, rtx to,
> >>  				void *from_cfn_data,
> >>  				unsigned HOST_WIDE_INT len,
> >>  				unsigned int align, bool push,
> >> -				bool qi_vector_mode)
> >> +				by_pieces_operation op)
> >>    : m_to (to, to_load, NULL, NULL),
> >>      m_from (from, from_load, from_cfn, from_cfn_data),
> >>      m_len (len), m_max_size (max_pieces + 1),
> >> -    m_push (push), m_qi_vector_mode (qi_vector_mode)
> >> +    m_push (push), m_op (op)
> >>  {
> >>    int toi = m_to.get_addr_inc ();
> >>    int fromi = m_from.get_addr_inc (); @@ -1375,8 +1403,7 @@ 
> >> op_by_pieces_d::op_by_pieces_d (unsigned int
> max_pieces, rtx to,
> >>      {
> >>        /* Find the mode of the largest comparison.  */
> >>        fixed_size_mode mode
> >> -	= widest_fixed_size_mode_for_size (m_max_size,
> >> -					   m_qi_vector_mode);
> >> +	= widest_fixed_size_mode_for_size (m_max_size, m_op);
> >>
> >>        m_from.decide_autoinc (mode, m_reverse, len);
> >>        m_to.decide_autoinc (mode, m_reverse, len); @@ -1401,7 
> >> +1428,7 @@ op_by_pieces_d::get_usable_mode
> (fixed_size_mode mode, unsigned int len)
> >>        if (len >= size && prepare_mode (mode, m_align))
> >>  	break;
> >>        /* widest_fixed_size_mode_for_size checks SIZE > 1.  */
> >> -      mode = widest_fixed_size_mode_for_size (size, m_qi_vector_mode);
> >> +      mode = widest_fixed_size_mode_for_size (size, m_op);
> >>      }
> >>    while (1);
> >>    return mode;
> >> @@ -1414,7 +1441,7 @@ fixed_size_mode  
> >> op_by_pieces_d::smallest_fixed_size_mode_for_size (unsigned int 
> >> size)  {
> >>    /* Use QI vector only for > size of WORD.  */
> >> -  if (m_qi_vector_mode && size > UNITS_PER_WORD)
> >> +  if (can_use_qi_vectors (m_op) && size > UNITS_PER_WORD)
> >>      {
> >>        machine_mode mode;
> >>        fixed_size_mode candidate;
> >> @@ -1427,8 +1454,7 @@
> op_by_pieces_d::smallest_fixed_size_mode_for_size (unsigned int size)
> >>  	      break;
> >>
> >>  	    if (GET_MODE_SIZE (candidate) >= size
> >> -		&& (optab_handler (vec_duplicate_optab, candidate)
> >> -		    != CODE_FOR_nothing))
> >> +		&& qi_vector_mode_supported_p (candidate, m_op))
> >>  	      return candidate;
> >>  	  }
> >>      }
> >> @@ -1451,7 +1477,7 @@ op_by_pieces_d::run ()
> >>
> >>    /* widest_fixed_size_mode_for_size checks M_MAX_SIZE > 1.  */
> >>    fixed_size_mode mode
> >> -    = widest_fixed_size_mode_for_size (m_max_size, m_qi_vector_mode);
> >> +    = widest_fixed_size_mode_for_size (m_max_size, m_op);
> >>    mode = get_usable_mode (mode, length);
> >>
> >>    by_pieces_prev to_prev = { nullptr, mode }; @@ -1516,8 +1542,7 
> >> @@ op_by_pieces_d::run ()
> >>        else
> >>  	{
> >>  	  /* widest_fixed_size_mode_for_size checks SIZE > 1.  */
> >> -	  mode = widest_fixed_size_mode_for_size (size,
> >> -						  m_qi_vector_mode);
> >> +	  mode = widest_fixed_size_mode_for_size (size, m_op);
> >>  	  mode = get_usable_mode (mode, length);
> >>  	}
> >>      }
> >> @@ -1543,7 +1568,7 @@ class move_by_pieces_d : public
> op_by_pieces_d
> >>    move_by_pieces_d (rtx to, rtx from, unsigned HOST_WIDE_INT len,
> >>  		    unsigned int align)
> >>      : op_by_pieces_d (MOVE_MAX_PIECES, to, false, from, true, NULL,
> >> -		      NULL, len, align, PUSHG_P (to))
> >> +		      NULL, len, align, PUSHG_P (to), MOVE_BY_PIECES)
> >>    {
> >>    }
> >>    rtx finish_retmode (memop_ret);
> >> @@ -1632,15 +1657,16 @@ move_by_pieces (rtx to, rtx from, unsigned
> HOST_WIDE_INT len,
> >>  class store_by_pieces_d : public op_by_pieces_d  {
> >>    insn_gen_fn m_gen_fun;
> >> +
> >>    void generate (rtx, rtx, machine_mode) final override;
> >>    bool prepare_mode (machine_mode, unsigned int) final override;
> >>
> >>   public:
> >>    store_by_pieces_d (rtx to, by_pieces_constfn cfn, void *cfn_data,
> >>  		     unsigned HOST_WIDE_INT len, unsigned int align,
> >> -		     bool qi_vector_mode)
> >> +		     by_pieces_operation op)
> >>      : op_by_pieces_d (STORE_MAX_PIECES, to, false, NULL_RTX, true, cfn,
> >> -		      cfn_data, len, align, false, qi_vector_mode)
> >> +		      cfn_data, len, align, false, op)
> >>    {
> >>    }
> >>    rtx finish_retmode (memop_ret);
> >> @@ -1729,8 +1755,8 @@ can_store_by_pieces (unsigned
> HOST_WIDE_INT len,
> >>        max_size = STORE_MAX_PIECES + 1;
> >>        while (max_size > 1 && l > 0)
> >>  	{
> >> -	  fixed_size_mode mode
> >> -	    = widest_fixed_size_mode_for_size (max_size, memsetp);
> >> +	  auto op = memsetp ? SET_BY_PIECES : STORE_BY_PIECES;
> >> +	  auto mode = widest_fixed_size_mode_for_size (max_size, op);
> >>
> >>  	  icode = optab_handler (mov_optab, mode);
> >>  	  if (icode != CODE_FOR_nothing
> >> @@ -1793,7 +1819,7 @@ store_by_pieces (rtx to, unsigned
> HOST_WIDE_INT len,
> >>  		 optimize_insn_for_speed_p ()));
> >>
> >>    store_by_pieces_d data (to, constfun, constfundata, len, align,
> >> -			  memsetp);
> >> +			  memsetp ? SET_BY_PIECES : STORE_BY_PIECES);
> >>    data.run ();
> >>
> >>    if (retmode != RETURN_BEGIN)
> >> @@ -1814,7 +1840,7 @@ clear_by_pieces (rtx to, unsigned
> HOST_WIDE_INT len, unsigned int align)
> >>    /* Use builtin_memset_read_str to support vector mode broadcast.  */
> >>    char c = 0;
> >>    store_by_pieces_d data (to, builtin_memset_read_str, &c, len, align,
> >> -			  true);
> >> +			  CLEAR_BY_PIECES);
> >>    data.run ();
> >>  }
> >>
> >> @@ -1832,12 +1858,13 @@ class compare_by_pieces_d : public
> op_by_pieces_d
> >>    void generate (rtx, rtx, machine_mode) final override;
> >>    bool prepare_mode (machine_mode, unsigned int) final override;
> >>    void finish_mode (machine_mode) final override;
> >> +
> >>   public:
> >>    compare_by_pieces_d (rtx op0, rtx op1, by_pieces_constfn op1_cfn,
> >>  		       void *op1_cfn_data, HOST_WIDE_INT len, int align,
> >>  		       rtx_code_label *fail_label)
> >>      : op_by_pieces_d (COMPARE_MAX_PIECES, op0, true, op1, true,
> op1_cfn,
> >> -		      op1_cfn_data, len, align, false)
> >> +		      op1_cfn_data, len, align, false, COMPARE_BY_PIECES)
> >>    {
> >>      m_fail_label = fail_label;
> >>    }
  

OK, I will take it.

Thanks
Gui Haochen

在 2023/10/24 16:49, Jiang, Haochen 写道:
> It seems that the mail got caught elsewhere and did not send into gcc-patches
> mailing thread. Resending that.
> 
> Thx,
> Haochen
> 
> -----Original Message-----
> From: Jiang, Haochen 
> Sent: Tuesday, October 24, 2023 4:43 PM
> To: HAO CHEN GUI <guihaoc@linux.ibm.com>; Richard Sandiford <richard.sandiford@arm.com>
> Cc: gcc-patches <gcc-patches@gcc.gnu.org>
> Subject: RE: [PATCH-1v4, expand] Enable vector mode for compare_by_pieces [PR111449]
> 
> Hi Haochen Gui,
> 
> It seems that the commit caused lots of test case fail on x86 platforms:
> 
> https://gcc.gnu.org/pipermail/gcc-regression/2023-October/078379.html
> https://gcc.gnu.org/pipermail/gcc-regression/2023-October/078380.html
> https://gcc.gnu.org/pipermail/gcc-regression/2023-October/078381.html
> https://gcc.gnu.org/pipermail/gcc-regression/2023-October/078382.html
> https://gcc.gnu.org/pipermail/gcc-regression/2023-October/078383.html
> https://gcc.gnu.org/pipermail/gcc-regression/2023-October/078384.html
> 
> Please help verify that if we need some testcase change or we get bug here.
> 
> A simple reproducer under build folder is:
> 
> make check RUNTESTFLAGS="i386.exp=g++.target/i386/pr80566-2.C --target_board='unix{-m64\ -march=cascadelake,-m32\ -march=cascadelake,-m32,-m64}'"
> 
> Thx,
> Haochen
> 
>> -----Original Message-----
>> From: HAO CHEN GUI <guihaoc@linux.ibm.com>
>> Sent: Monday, October 23, 2023 9:30 AM
>> To: Richard Sandiford <richard.sandiford@arm.com>
>> Cc: gcc-patches <gcc-patches@gcc.gnu.org>
>> Subject: Re: [PATCH-1v4, expand] Enable vector mode for 
>> compare_by_pieces [PR111449]
>>
>> Committed as r14-4835.
>>
>> https://gcc.gnu.org/g:f08ca5903c7a02b450b93143467f70b9fd8e0085
>>
>> Thanks
>> Gui Haochen
>>
>> 在 2023/10/20 16:49, Richard Sandiford 写道:
>>> HAO CHEN GUI <guihaoc@linux.ibm.com> writes:
>>>> Hi,
>>>>   Vector mode instructions are efficient for compare on some targets.
>>>> This patch enables vector mode for compare_by_pieces. Two help 
>>>> functions are added to check if vector mode is available for 
>>>> certain by pieces operations and if if optabs exists for the mode 
>>>> and certain by pieces operations. One member is added in class 
>>>> op_by_pieces_d to record the type of operations.
>>>>
>>>>   The test case is in the second patch which is rs6000 specific.
>>>>
>>>>   Compared to last version, the main change is to add a target hook 
>>>> check - scalar_mode_supported_p when retrieving the available 
>>>> scalar modes. The mode which is not supported for a target should be skipped.
>>>> (e.g. TImode on ppc). Also some function names and comments are 
>>>> refined according to reviewer's advice.
>>>>
>>>>   Bootstrapped and tested on x86 and powerpc64-linux BE and LE with 
>>>> no regressions.
>>>>
>>>> Thanks
>>>> Gui Haochen
>>>>
>>>> ChangeLog
>>>> Expand: Enable vector mode for by pieces compares
>>>>
>>>> Vector mode compare instructions are efficient for equality compare 
>>>> on rs6000. This patch refactors the codes of by pieces operation to 
>>>> enable vector mode for compare.
>>>>
>>>> gcc/
>>>> 	PR target/111449
>>>> 	* expr.cc (can_use_qi_vectors): New function to return true if
>>>> 	we know how to implement OP using vectors of bytes.
>>>> 	(qi_vector_mode_supported_p): New function to check if optabs
>>>> 	exists for the mode and certain by pieces operations.
>>>> 	(widest_fixed_size_mode_for_size): Replace the second argument
>>>> 	with the type of by pieces operations.  Call can_use_qi_vectors
>>>> 	and qi_vector_mode_supported_p to do the check.  Call
>>>> 	scalar_mode_supported_p to check if the scalar mode is supported.
>>>> 	(by_pieces_ninsns): Pass the type of by pieces operation to
>>>> 	widest_fixed_size_mode_for_size.
>>>> 	(class op_by_pieces_d): Remove m_qi_vector_mode.  Add m_op to
>>>> 	record the type of by pieces operations.
>>>> 	(op_by_pieces_d::op_by_pieces_d): Change last argument to the
>>>> 	type of by pieces operations, initialize m_op with it.  Pass
>>>> 	m_op to function widest_fixed_size_mode_for_size.
>>>> 	(op_by_pieces_d::get_usable_mode): Pass m_op to function
>>>> 	widest_fixed_size_mode_for_size.
>>>> 	(op_by_pieces_d::smallest_fixed_size_mode_for_size): Call
>>>> 	can_use_qi_vectors and qi_vector_mode_supported_p to do the
>>>> 	check.
>>>> 	(op_by_pieces_d::run): Pass m_op to function
>>>> 	widest_fixed_size_mode_for_size.
>>>> 	(move_by_pieces_d::move_by_pieces_d): Set m_op to
>> MOVE_BY_PIECES.
>>>> 	(store_by_pieces_d::store_by_pieces_d): Set m_op with the op.
>>>> 	(can_store_by_pieces): Pass the type of by pieces operations to
>>>> 	widest_fixed_size_mode_for_size.
>>>> 	(clear_by_pieces): Initialize class store_by_pieces_d with
>>>> 	CLEAR_BY_PIECES.
>>>> 	(compare_by_pieces_d::compare_by_pieces_d): Set m_op to
>>>> 	COMPARE_BY_PIECES.
>>>
>>> OK, thanks.  And thanks for your patience.
>>>
>>> Richard
>>>
>>>> patch.diff
>>>> diff --git a/gcc/expr.cc b/gcc/expr.cc index 
>>>> 2c9930ec674..ad5f9dd8ec2 100644
>>>> --- a/gcc/expr.cc
>>>> +++ b/gcc/expr.cc
>>>> @@ -988,18 +988,44 @@ alignment_for_piecewise_move (unsigned int
>> max_pieces, unsigned int align)
>>>>    return align;
>>>>  }
>>>>
>>>> -/* Return the widest QI vector, if QI_MODE is true, or integer mode
>>>> -   that is narrower than SIZE bytes.  */
>>>> +/* Return true if we know how to implement OP using vectors of 
>>>> +bytes.  */ static bool can_use_qi_vectors (by_pieces_operation op) 
>>>> +{
>>>> +  return (op == COMPARE_BY_PIECES
>>>> +	  || op == SET_BY_PIECES
>>>> +	  || op == CLEAR_BY_PIECES);
>>>> +}
>>>> +
>>>> +/* Return true if optabs exists for the mode and certain by pieces
>>>> +   operations.  */
>>>> +static bool
>>>> +qi_vector_mode_supported_p (fixed_size_mode mode,
>> by_pieces_operation op)
>>>> +{
>>>> +  if ((op == SET_BY_PIECES || op == CLEAR_BY_PIECES)
>>>> +      && optab_handler (vec_duplicate_optab, mode) !=
>> CODE_FOR_nothing)
>>>> +    return true;
>>>> +
>>>> +  if (op == COMPARE_BY_PIECES
>>>> +      && optab_handler (mov_optab, mode) != CODE_FOR_nothing
>>>> +      && can_compare_p (EQ, mode, ccp_jump))
>>>> +    return true;
>>>>
>>>> +  return false;
>>>> +}
>>>> +
>>>> +/* Return the widest mode that can be used to perform part of an
>>>> +   operation OP on SIZE bytes.  Try to use QI vector modes where
>>>> +   possible.  */
>>>>  static fixed_size_mode
>>>> -widest_fixed_size_mode_for_size (unsigned int size, bool 
>>>> qi_vector)
>>>> +widest_fixed_size_mode_for_size (unsigned int size, 
>>>> +by_pieces_operation
>> op)
>>>>  {
>>>>    fixed_size_mode result = NARROWEST_INT_MODE;
>>>>
>>>>    gcc_checking_assert (size > 1);
>>>>
>>>>    /* Use QI vector only if size is wider than a WORD.  */
>>>> -  if (qi_vector && size > UNITS_PER_WORD)
>>>> +  if (can_use_qi_vectors (op) && size > UNITS_PER_WORD)
>>>>      {
>>>>        machine_mode mode;
>>>>        fixed_size_mode candidate;
>>>> @@ -1009,8 +1035,7 @@ widest_fixed_size_mode_for_size (unsigned int
>> size, bool qi_vector)
>>>>  	  {
>>>>  	    if (GET_MODE_SIZE (candidate) >= size)
>>>>  	      break;
>>>> -	    if (optab_handler (vec_duplicate_optab, candidate)
>>>> -		!= CODE_FOR_nothing)
>>>> +	    if (qi_vector_mode_supported_p (candidate, op))
>>>>  	      result = candidate;
>>>>  	  }
>>>>
>>>> @@ -1019,9 +1044,14 @@ widest_fixed_size_mode_for_size (unsigned
>> int size, bool qi_vector)
>>>>      }
>>>>
>>>>    opt_scalar_int_mode tmode;
>>>> +  scalar_int_mode mode;
>>>>    FOR_EACH_MODE_IN_CLASS (tmode, MODE_INT)
>>>> -    if (GET_MODE_SIZE (tmode.require ()) < size)
>>>> -      result = tmode.require ();
>>>> +    {
>>>> +      mode = tmode.require ();
>>>> +      if (GET_MODE_SIZE (mode) < size
>>>> +	  && targetm.scalar_mode_supported_p (mode))
>>>> +      result = mode;
>>>> +    }
>>>>
>>>>    return result;
>>>>  }
>>>> @@ -1061,8 +1091,7 @@ by_pieces_ninsns (unsigned HOST_WIDE_INT l,
>> unsigned int align,
>>>>      {
>>>>        /* NB: Round up L and ALIGN to the widest integer mode for
>>>>  	 MAX_SIZE.  */
>>>> -      mode = widest_fixed_size_mode_for_size (max_size,
>>>> -					      op == SET_BY_PIECES);
>>>> +      mode = widest_fixed_size_mode_for_size (max_size, op);
>>>>        if (optab_handler (mov_optab, mode) != CODE_FOR_nothing)
>>>>  	{
>>>>  	  unsigned HOST_WIDE_INT up = ROUND_UP (l, GET_MODE_SIZE
>> (mode));
>>>> @@ -1076,8 +1105,7 @@ by_pieces_ninsns (unsigned HOST_WIDE_INT l,
>> unsigned int align,
>>>>
>>>>    while (max_size > 1 && l > 0)
>>>>      {
>>>> -      mode = widest_fixed_size_mode_for_size (max_size,
>>>> -					      op == SET_BY_PIECES);
>>>> +      mode = widest_fixed_size_mode_for_size (max_size, op);
>>>>        enum insn_code icode;
>>>>
>>>>        unsigned int modesize = GET_MODE_SIZE (mode); @@ -1317,8 
>>>> +1345,8 @@ class op_by_pieces_d
>>>>    bool m_push;
>>>>    /* True if targetm.overlap_op_by_pieces_p () returns true.  */
>>>>    bool m_overlap_op_by_pieces;
>>>> -  /* True if QI vector mode can be used.  */
>>>> -  bool m_qi_vector_mode;
>>>> +  /* The type of operation that we're performing.  */  
>>>> + by_pieces_operation m_op;
>>>>
>>>>    /* Virtual functions, overriden by derived classes for the specific
>>>>       operation.  */
>>>> @@ -1331,7 +1359,7 @@ class op_by_pieces_d
>>>>   public:
>>>>    op_by_pieces_d (unsigned int, rtx, bool, rtx, bool, by_pieces_constfn,
>>>>  		  void *, unsigned HOST_WIDE_INT, unsigned int, bool,
>>>> -		  bool = false);
>>>> +		  by_pieces_operation);
>>>>    void run ();
>>>>  };
>>>>
>>>> @@ -1349,11 +1377,11 @@ op_by_pieces_d::op_by_pieces_d (unsigned
>> int max_pieces, rtx to,
>>>>  				void *from_cfn_data,
>>>>  				unsigned HOST_WIDE_INT len,
>>>>  				unsigned int align, bool push,
>>>> -				bool qi_vector_mode)
>>>> +				by_pieces_operation op)
>>>>    : m_to (to, to_load, NULL, NULL),
>>>>      m_from (from, from_load, from_cfn, from_cfn_data),
>>>>      m_len (len), m_max_size (max_pieces + 1),
>>>> -    m_push (push), m_qi_vector_mode (qi_vector_mode)
>>>> +    m_push (push), m_op (op)
>>>>  {
>>>>    int toi = m_to.get_addr_inc ();
>>>>    int fromi = m_from.get_addr_inc (); @@ -1375,8 +1403,7 @@ 
>>>> op_by_pieces_d::op_by_pieces_d (unsigned int
>> max_pieces, rtx to,
>>>>      {
>>>>        /* Find the mode of the largest comparison.  */
>>>>        fixed_size_mode mode
>>>> -	= widest_fixed_size_mode_for_size (m_max_size,
>>>> -					   m_qi_vector_mode);
>>>> +	= widest_fixed_size_mode_for_size (m_max_size, m_op);
>>>>
>>>>        m_from.decide_autoinc (mode, m_reverse, len);
>>>>        m_to.decide_autoinc (mode, m_reverse, len); @@ -1401,7 
>>>> +1428,7 @@ op_by_pieces_d::get_usable_mode
>> (fixed_size_mode mode, unsigned int len)
>>>>        if (len >= size && prepare_mode (mode, m_align))
>>>>  	break;
>>>>        /* widest_fixed_size_mode_for_size checks SIZE > 1.  */
>>>> -      mode = widest_fixed_size_mode_for_size (size, m_qi_vector_mode);
>>>> +      mode = widest_fixed_size_mode_for_size (size, m_op);
>>>>      }
>>>>    while (1);
>>>>    return mode;
>>>> @@ -1414,7 +1441,7 @@ fixed_size_mode  
>>>> op_by_pieces_d::smallest_fixed_size_mode_for_size (unsigned int 
>>>> size)  {
>>>>    /* Use QI vector only for > size of WORD.  */
>>>> -  if (m_qi_vector_mode && size > UNITS_PER_WORD)
>>>> +  if (can_use_qi_vectors (m_op) && size > UNITS_PER_WORD)
>>>>      {
>>>>        machine_mode mode;
>>>>        fixed_size_mode candidate;
>>>> @@ -1427,8 +1454,7 @@
>> op_by_pieces_d::smallest_fixed_size_mode_for_size (unsigned int size)
>>>>  	      break;
>>>>
>>>>  	    if (GET_MODE_SIZE (candidate) >= size
>>>> -		&& (optab_handler (vec_duplicate_optab, candidate)
>>>> -		    != CODE_FOR_nothing))
>>>> +		&& qi_vector_mode_supported_p (candidate, m_op))
>>>>  	      return candidate;
>>>>  	  }
>>>>      }
>>>> @@ -1451,7 +1477,7 @@ op_by_pieces_d::run ()
>>>>
>>>>    /* widest_fixed_size_mode_for_size checks M_MAX_SIZE > 1.  */
>>>>    fixed_size_mode mode
>>>> -    = widest_fixed_size_mode_for_size (m_max_size, m_qi_vector_mode);
>>>> +    = widest_fixed_size_mode_for_size (m_max_size, m_op);
>>>>    mode = get_usable_mode (mode, length);
>>>>
>>>>    by_pieces_prev to_prev = { nullptr, mode }; @@ -1516,8 +1542,7 
>>>> @@ op_by_pieces_d::run ()
>>>>        else
>>>>  	{
>>>>  	  /* widest_fixed_size_mode_for_size checks SIZE > 1.  */
>>>> -	  mode = widest_fixed_size_mode_for_size (size,
>>>> -						  m_qi_vector_mode);
>>>> +	  mode = widest_fixed_size_mode_for_size (size, m_op);
>>>>  	  mode = get_usable_mode (mode, length);
>>>>  	}
>>>>      }
>>>> @@ -1543,7 +1568,7 @@ class move_by_pieces_d : public
>> op_by_pieces_d
>>>>    move_by_pieces_d (rtx to, rtx from, unsigned HOST_WIDE_INT len,
>>>>  		    unsigned int align)
>>>>      : op_by_pieces_d (MOVE_MAX_PIECES, to, false, from, true, NULL,
>>>> -		      NULL, len, align, PUSHG_P (to))
>>>> +		      NULL, len, align, PUSHG_P (to), MOVE_BY_PIECES)
>>>>    {
>>>>    }
>>>>    rtx finish_retmode (memop_ret);
>>>> @@ -1632,15 +1657,16 @@ move_by_pieces (rtx to, rtx from, unsigned
>> HOST_WIDE_INT len,
>>>>  class store_by_pieces_d : public op_by_pieces_d  {
>>>>    insn_gen_fn m_gen_fun;
>>>> +
>>>>    void generate (rtx, rtx, machine_mode) final override;
>>>>    bool prepare_mode (machine_mode, unsigned int) final override;
>>>>
>>>>   public:
>>>>    store_by_pieces_d (rtx to, by_pieces_constfn cfn, void *cfn_data,
>>>>  		     unsigned HOST_WIDE_INT len, unsigned int align,
>>>> -		     bool qi_vector_mode)
>>>> +		     by_pieces_operation op)
>>>>      : op_by_pieces_d (STORE_MAX_PIECES, to, false, NULL_RTX, true, cfn,
>>>> -		      cfn_data, len, align, false, qi_vector_mode)
>>>> +		      cfn_data, len, align, false, op)
>>>>    {
>>>>    }
>>>>    rtx finish_retmode (memop_ret);
>>>> @@ -1729,8 +1755,8 @@ can_store_by_pieces (unsigned
>> HOST_WIDE_INT len,
>>>>        max_size = STORE_MAX_PIECES + 1;
>>>>        while (max_size > 1 && l > 0)
>>>>  	{
>>>> -	  fixed_size_mode mode
>>>> -	    = widest_fixed_size_mode_for_size (max_size, memsetp);
>>>> +	  auto op = memsetp ? SET_BY_PIECES : STORE_BY_PIECES;
>>>> +	  auto mode = widest_fixed_size_mode_for_size (max_size, op);
>>>>
>>>>  	  icode = optab_handler (mov_optab, mode);
>>>>  	  if (icode != CODE_FOR_nothing
>>>> @@ -1793,7 +1819,7 @@ store_by_pieces (rtx to, unsigned
>> HOST_WIDE_INT len,
>>>>  		 optimize_insn_for_speed_p ()));
>>>>
>>>>    store_by_pieces_d data (to, constfun, constfundata, len, align,
>>>> -			  memsetp);
>>>> +			  memsetp ? SET_BY_PIECES : STORE_BY_PIECES);
>>>>    data.run ();
>>>>
>>>>    if (retmode != RETURN_BEGIN)
>>>> @@ -1814,7 +1840,7 @@ clear_by_pieces (rtx to, unsigned
>> HOST_WIDE_INT len, unsigned int align)
>>>>    /* Use builtin_memset_read_str to support vector mode broadcast.  */
>>>>    char c = 0;
>>>>    store_by_pieces_d data (to, builtin_memset_read_str, &c, len, align,
>>>> -			  true);
>>>> +			  CLEAR_BY_PIECES);
>>>>    data.run ();
>>>>  }
>>>>
>>>> @@ -1832,12 +1858,13 @@ class compare_by_pieces_d : public
>> op_by_pieces_d
>>>>    void generate (rtx, rtx, machine_mode) final override;
>>>>    bool prepare_mode (machine_mode, unsigned int) final override;
>>>>    void finish_mode (machine_mode) final override;
>>>> +
>>>>   public:
>>>>    compare_by_pieces_d (rtx op0, rtx op1, by_pieces_constfn op1_cfn,
>>>>  		       void *op1_cfn_data, HOST_WIDE_INT len, int align,
>>>>  		       rtx_code_label *fail_label)
>>>>      : op_by_pieces_d (COMPARE_MAX_PIECES, op0, true, op1, true,
>> op1_cfn,
>>>> -		      op1_cfn_data, len, align, false)
>>>> +		      op1_cfn_data, len, align, false, COMPARE_BY_PIECES)
>>>>    {
>>>>      m_fail_label = fail_label;
>>>>    }
  

Hi Haochen,
  The regression cases are caused by "targetm.scalar_mode_supported_p" I added
for scalar mode checking. XImode, OImode and TImode (with -m32) are not
enabled in ix86_scalar_mode_supported_p. So they're excluded from by pieces
operations on i386.

  The original code doesn't do a check for scalar modes. I think it might be
incorrect as not all scalar modes support move and compare optabs. (e.g.
TImode with -m32 on rs6000).

  I drafted a new patch to manually check optabs for scalar mode. Now both
vector and scalar modes are checked for optabs.

  I did a simple test. All former regression cases are back. Could you help do
a full regression test? I am worry about the coverage of my CI system.

Thanks
Gui Haochen

patch.diff
diff --git a/gcc/expr.cc b/gcc/expr.cc
index 7aac575eff8..2af9fcbed18 100644
--- a/gcc/expr.cc
+++ b/gcc/expr.cc
@@ -1000,18 +1000,21 @@ can_use_qi_vectors (by_pieces_operation op)
 /* Return true if optabs exists for the mode and certain by pieces
    operations.  */
 static bool
-qi_vector_mode_supported_p (fixed_size_mode mode, by_pieces_operation op)
+mode_supported_p (fixed_size_mode mode, by_pieces_operation op)
 {
+  if (optab_handler (mov_optab, mode) == CODE_FOR_nothing)
+    return false;
+
   if ((op == SET_BY_PIECES || op == CLEAR_BY_PIECES)
-      && optab_handler (vec_duplicate_optab, mode) != CODE_FOR_nothing)
-    return true;
+      && VECTOR_MODE_P (mode)
+      && optab_handler (vec_duplicate_optab, mode) == CODE_FOR_nothing)
+    return false;

   if (op == COMPARE_BY_PIECES
-      && optab_handler (mov_optab, mode) != CODE_FOR_nothing
-      && can_compare_p (EQ, mode, ccp_jump))
-    return true;
+      && !can_compare_p (EQ, mode, ccp_jump))
+    return false;

-  return false;
+  return true;
 }

 /* Return the widest mode that can be used to perform part of an
@@ -1035,7 +1038,7 @@ widest_fixed_size_mode_for_size (unsigned int size, by_pieces_operation op)
 	  {
 	    if (GET_MODE_SIZE (candidate) >= size)
 	      break;
-	    if (qi_vector_mode_supported_p (candidate, op))
+	    if (mode_supported_p (candidate, op))
 	      result = candidate;
 	  }

@@ -1049,7 +1052,7 @@ widest_fixed_size_mode_for_size (unsigned int size, by_pieces_operation op)
     {
       mode = tmode.require ();
       if (GET_MODE_SIZE (mode) < size
-	  && targetm.scalar_mode_supported_p (mode))
+	  && mode_supported_p (mode, op))
       result = mode;
     }

@@ -1454,7 +1457,7 @@ op_by_pieces_d::smallest_fixed_size_mode_for_size (unsigned int size)
 	      break;

 	    if (GET_MODE_SIZE (candidate) >= size
-		&& qi_vector_mode_supported_p (candidate, m_op))
+		&& mode_supported_p (candidate, m_op))
 	      return candidate;
 	  }
     }
  

HAO CHEN GUI <guihaoc@linux.ibm.com> writes:
> Hi Haochen,
>   The regression cases are caused by "targetm.scalar_mode_supported_p" I added
> for scalar mode checking. XImode, OImode and TImode (with -m32) are not
> enabled in ix86_scalar_mode_supported_p. So they're excluded from by pieces
> operations on i386.
>
>   The original code doesn't do a check for scalar modes. I think it might be
> incorrect as not all scalar modes support move and compare optabs. (e.g.
> TImode with -m32 on rs6000).
>
>   I drafted a new patch to manually check optabs for scalar mode. Now both
> vector and scalar modes are checked for optabs.
>
>   I did a simple test. All former regression cases are back. Could you help do
> a full regression test? I am worry about the coverage of my CI system.

Thanks for the quick fix.  The patch LGTM FWIW.  Just a small suggestion
for the function name:

>
> Thanks
> Gui Haochen
>
> patch.diff
> diff --git a/gcc/expr.cc b/gcc/expr.cc
> index 7aac575eff8..2af9fcbed18 100644
> --- a/gcc/expr.cc
> +++ b/gcc/expr.cc
> @@ -1000,18 +1000,21 @@ can_use_qi_vectors (by_pieces_operation op)
>  /* Return true if optabs exists for the mode and certain by pieces
>     operations.  */
>  static bool
> -qi_vector_mode_supported_p (fixed_size_mode mode, by_pieces_operation op)
> +mode_supported_p (fixed_size_mode mode, by_pieces_operation op)

Might be worth calling this something more specific, such as
by_pieces_mode_supported_p.

Otherwise the patch is OK for trunk if it passes the x86 testing.

Thanks,
Richard

>  {
> +  if (optab_handler (mov_optab, mode) == CODE_FOR_nothing)
> +    return false;
> +
>    if ((op == SET_BY_PIECES || op == CLEAR_BY_PIECES)
> -      && optab_handler (vec_duplicate_optab, mode) != CODE_FOR_nothing)
> -    return true;
> +      && VECTOR_MODE_P (mode)
> +      && optab_handler (vec_duplicate_optab, mode) == CODE_FOR_nothing)
> +    return false;
>
>    if (op == COMPARE_BY_PIECES
> -      && optab_handler (mov_optab, mode) != CODE_FOR_nothing
> -      && can_compare_p (EQ, mode, ccp_jump))
> -    return true;
> +      && !can_compare_p (EQ, mode, ccp_jump))
> +    return false;
>
> -  return false;
> +  return true;
>  }
>
>  /* Return the widest mode that can be used to perform part of an
> @@ -1035,7 +1038,7 @@ widest_fixed_size_mode_for_size (unsigned int size, by_pieces_operation op)
>  	  {
>  	    if (GET_MODE_SIZE (candidate) >= size)
>  	      break;
> -	    if (qi_vector_mode_supported_p (candidate, op))
> +	    if (mode_supported_p (candidate, op))
>  	      result = candidate;
>  	  }
>
> @@ -1049,7 +1052,7 @@ widest_fixed_size_mode_for_size (unsigned int size, by_pieces_operation op)
>      {
>        mode = tmode.require ();
>        if (GET_MODE_SIZE (mode) < size
> -	  && targetm.scalar_mode_supported_p (mode))
> +	  && mode_supported_p (mode, op))
>        result = mode;
>      }
>
> @@ -1454,7 +1457,7 @@ op_by_pieces_d::smallest_fixed_size_mode_for_size (unsigned int size)
>  	      break;
>
>  	    if (GET_MODE_SIZE (candidate) >= size
> -		&& qi_vector_mode_supported_p (candidate, m_op))
> +		&& mode_supported_p (candidate, m_op))
>  	      return candidate;
>  	  }
>      }
  

> -----Original Message-----
> From: Richard Sandiford <richard.sandiford@arm.com>
> Sent: Wednesday, October 25, 2023 4:40 PM
> To: HAO CHEN GUI <guihaoc@linux.ibm.com>
> Cc: Jiang, Haochen <haochen.jiang@intel.com>; gcc-patches <gcc-
> patches@gcc.gnu.org>
> Subject: Re: [PATCH-1v4, expand] Enable vector mode for compare_by_pieces
> [PR111449]
> 
> HAO CHEN GUI <guihaoc@linux.ibm.com> writes:
> > Hi Haochen,
> >   The regression cases are caused by "targetm.scalar_mode_supported_p"
> > I added for scalar mode checking. XImode, OImode and TImode (with
> > -m32) are not enabled in ix86_scalar_mode_supported_p. So they're
> > excluded from by pieces operations on i386.
> >
> >   The original code doesn't do a check for scalar modes. I think it
> > might be incorrect as not all scalar modes support move and compare optabs. (e.g.
> > TImode with -m32 on rs6000).
> >
> >   I drafted a new patch to manually check optabs for scalar mode. Now
> > both vector and scalar modes are checked for optabs.
> >
> >   I did a simple test. All former regression cases are back. Could you
> > help do a full regression test? I am worry about the coverage of my CI system.

Thanks for that. I am running the regression test now.

Thx,
Haochen

> 
> Thanks for the quick fix.  The patch LGTM FWIW.  Just a small suggestion for
> the function name:
> 
> >
> > Thanks
> > Gui Haochen
> >
> > patch.diff
> > diff --git a/gcc/expr.cc b/gcc/expr.cc index 7aac575eff8..2af9fcbed18
> > 100644
> > --- a/gcc/expr.cc
> > +++ b/gcc/expr.cc
> > @@ -1000,18 +1000,21 @@ can_use_qi_vectors (by_pieces_operation op)
> >  /* Return true if optabs exists for the mode and certain by pieces
> >     operations.  */
> >  static bool
> > -qi_vector_mode_supported_p (fixed_size_mode mode,
> by_pieces_operation
> > op)
> > +mode_supported_p (fixed_size_mode mode, by_pieces_operation op)
> 
> Might be worth calling this something more specific, such as
> by_pieces_mode_supported_p.
> 
> Otherwise the patch is OK for trunk if it passes the x86 testing.
> 
> Thanks,
> Richard
> 
> >  {
> > +  if (optab_handler (mov_optab, mode) == CODE_FOR_nothing)
> > +    return false;
> > +
> >    if ((op == SET_BY_PIECES || op == CLEAR_BY_PIECES)
> > -      && optab_handler (vec_duplicate_optab, mode) != CODE_FOR_nothing)
> > -    return true;
> > +      && VECTOR_MODE_P (mode)
> > +      && optab_handler (vec_duplicate_optab, mode) ==
> CODE_FOR_nothing)
> > +    return false;
> >
> >    if (op == COMPARE_BY_PIECES
> > -      && optab_handler (mov_optab, mode) != CODE_FOR_nothing
> > -      && can_compare_p (EQ, mode, ccp_jump))
> > -    return true;
> > +      && !can_compare_p (EQ, mode, ccp_jump))
> > +    return false;
> >
> > -  return false;
> > +  return true;
> >  }
> >
> >  /* Return the widest mode that can be used to perform part of an @@
> > -1035,7 +1038,7 @@ widest_fixed_size_mode_for_size (unsigned int size,
> by_pieces_operation op)
> >  	  {
> >  	    if (GET_MODE_SIZE (candidate) >= size)
> >  	      break;
> > -	    if (qi_vector_mode_supported_p (candidate, op))
> > +	    if (mode_supported_p (candidate, op))
> >  	      result = candidate;
> >  	  }
> >
> > @@ -1049,7 +1052,7 @@ widest_fixed_size_mode_for_size (unsigned int
> size, by_pieces_operation op)
> >      {
> >        mode = tmode.require ();
> >        if (GET_MODE_SIZE (mode) < size
> > -	  && targetm.scalar_mode_supported_p (mode))
> > +	  && mode_supported_p (mode, op))
> >        result = mode;
> >      }
> >
> > @@ -1454,7 +1457,7 @@
> op_by_pieces_d::smallest_fixed_size_mode_for_size (unsigned int size)
> >  	      break;
> >
> >  	    if (GET_MODE_SIZE (candidate) >= size
> > -		&& qi_vector_mode_supported_p (candidate, m_op))
> > +		&& mode_supported_p (candidate, m_op))
> >  	      return candidate;
> >  	  }
> >      }
  

> -----Original Message-----
> From: Jiang, Haochen
> Sent: Wednesday, October 25, 2023 4:47 PM
> To: Richard Sandiford <richard.sandiford@arm.com>; HAO CHEN GUI
> <guihaoc@linux.ibm.com>
> Cc: gcc-patches <gcc-patches@gcc.gnu.org>
> Subject: RE: [PATCH-1v4, expand] Enable vector mode for compare_by_pieces
> [PR111449]
> 
> > -----Original Message-----
> > From: Richard Sandiford <richard.sandiford@arm.com>
> > Sent: Wednesday, October 25, 2023 4:40 PM
> > To: HAO CHEN GUI <guihaoc@linux.ibm.com>
> > Cc: Jiang, Haochen <haochen.jiang@intel.com>; gcc-patches <gcc-
> > patches@gcc.gnu.org>
> > Subject: Re: [PATCH-1v4, expand] Enable vector mode for
> > compare_by_pieces [PR111449]
> >
> > HAO CHEN GUI <guihaoc@linux.ibm.com> writes:
> > > Hi Haochen,
> > >   The regression cases are caused by "targetm.scalar_mode_supported_p"
> > > I added for scalar mode checking. XImode, OImode and TImode (with
> > > -m32) are not enabled in ix86_scalar_mode_supported_p. So they're
> > > excluded from by pieces operations on i386.
> > >
> > >   The original code doesn't do a check for scalar modes. I think it
> > > might be incorrect as not all scalar modes support move and compare
> optabs. (e.g.
> > > TImode with -m32 on rs6000).
> > >
> > >   I drafted a new patch to manually check optabs for scalar mode.
> > > Now both vector and scalar modes are checked for optabs.
> > >
> > >   I did a simple test. All former regression cases are back. Could
> > > you help do a full regression test? I am worry about the coverage of my CI
> system.
> 
> Thanks for that. I am running the regression test now.

The patch works. Thanks a lot!

Sorry for the delay since my CI accidentally crashed.

Thx,
Haochen

> 
> Thx,
> Haochen
> 
> >
> > Thanks for the quick fix.  The patch LGTM FWIW.  Just a small
> > suggestion for the function name:
> >
> > >
> > > Thanks
> > > Gui Haochen
> > >
> > > patch.diff
> > > diff --git a/gcc/expr.cc b/gcc/expr.cc index
> > > 7aac575eff8..2af9fcbed18
> > > 100644
> > > --- a/gcc/expr.cc
> > > +++ b/gcc/expr.cc
> > > @@ -1000,18 +1000,21 @@ can_use_qi_vectors (by_pieces_operation
> op)
> > >  /* Return true if optabs exists for the mode and certain by pieces
> > >     operations.  */
> > >  static bool
> > > -qi_vector_mode_supported_p (fixed_size_mode mode,
> > by_pieces_operation
> > > op)
> > > +mode_supported_p (fixed_size_mode mode, by_pieces_operation op)
> >
> > Might be worth calling this something more specific, such as
> > by_pieces_mode_supported_p.
> >
> > Otherwise the patch is OK for trunk if it passes the x86 testing.
> >
> > Thanks,
> > Richard
> >
> > >  {
> > > +  if (optab_handler (mov_optab, mode) == CODE_FOR_nothing)
> > > +    return false;
> > > +
> > >    if ((op == SET_BY_PIECES || op == CLEAR_BY_PIECES)
> > > -      && optab_handler (vec_duplicate_optab, mode) !=
> CODE_FOR_nothing)
> > > -    return true;
> > > +      && VECTOR_MODE_P (mode)
> > > +      && optab_handler (vec_duplicate_optab, mode) ==
> > CODE_FOR_nothing)
> > > +    return false;
> > >
> > >    if (op == COMPARE_BY_PIECES
> > > -      && optab_handler (mov_optab, mode) != CODE_FOR_nothing
> > > -      && can_compare_p (EQ, mode, ccp_jump))
> > > -    return true;
> > > +      && !can_compare_p (EQ, mode, ccp_jump))
> > > +    return false;
> > >
> > > -  return false;
> > > +  return true;
> > >  }
> > >
> > >  /* Return the widest mode that can be used to perform part of an @@
> > > -1035,7 +1038,7 @@ widest_fixed_size_mode_for_size (unsigned int
> > > size,
> > by_pieces_operation op)
> > >  	  {
> > >  	    if (GET_MODE_SIZE (candidate) >= size)
> > >  	      break;
> > > -	    if (qi_vector_mode_supported_p (candidate, op))
> > > +	    if (mode_supported_p (candidate, op))
> > >  	      result = candidate;
> > >  	  }
> > >
> > > @@ -1049,7 +1052,7 @@ widest_fixed_size_mode_for_size (unsigned int
> > size, by_pieces_operation op)
> > >      {
> > >        mode = tmode.require ();
> > >        if (GET_MODE_SIZE (mode) < size
> > > -	  && targetm.scalar_mode_supported_p (mode))
> > > +	  && mode_supported_p (mode, op))
> > >        result = mode;
> > >      }
> > >
> > > @@ -1454,7 +1457,7 @@
> > op_by_pieces_d::smallest_fixed_size_mode_for_size (unsigned int size)
> > >  	      break;
> > >
> > >  	    if (GET_MODE_SIZE (candidate) >= size
> > > -		&& qi_vector_mode_supported_p (candidate, m_op))
> > > +		&& mode_supported_p (candidate, m_op))
> > >  	      return candidate;
> > >  	  }
> > >      }