[v2,2/2] clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
Commit Message
The top_dp and top_edp muxes can be both parented to either TVDPLL1
or TVDPLL2, two identically specced PLLs for the specific purpose of
giving out pixel clock: this becomes a problem when the MediaTek
DisplayPort Interface (DPI) driver tries to set the pixel clock rate.
In the usecase of two simultaneous outputs (using two controllers),
it was seen that one of the displays would sometimes display garbled
output (if any at all) and this was because:
- top_edp was set to TVDPLL1, outputting X GHz
- top_dp was set to TVDPLL2, outputting Y GHz
- mtk_dpi calls clk_set_rate(top_edp, Z GHz)
- top_dp is switched to TVDPLL1
- TVDPLL1 changes its rate, top_edp outputs the wrong rate.
- eDP display is garbled
To solve this issue, remove all TVDPLL1 parents from `top_dp` and
all TVDPLL2 parents from `top_edp`, plus, necessarily switch both
clocks to use the new MUX_GATE_CLR_SET_UPD_INDEXED() macro to be
able to use the right bit index for the new parents list.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
drivers/clk/mediatek/clk-mt8195-topckgen.c | 22 ++++++++++++++--------
1 file changed, 14 insertions(+), 8 deletions(-)
Comments
On Wed, Oct 18, 2023 at 6:35 PM AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com> wrote:
>
> The top_dp and top_edp muxes can be both parented to either TVDPLL1
> or TVDPLL2, two identically specced PLLs for the specific purpose of
> giving out pixel clock: this becomes a problem when the MediaTek
> DisplayPort Interface (DPI) driver tries to set the pixel clock rate.
>
> In the usecase of two simultaneous outputs (using two controllers),
> it was seen that one of the displays would sometimes display garbled
> output (if any at all) and this was because:
> - top_edp was set to TVDPLL1, outputting X GHz
> - top_dp was set to TVDPLL2, outputting Y GHz
> - mtk_dpi calls clk_set_rate(top_edp, Z GHz)
> - top_dp is switched to TVDPLL1
> - TVDPLL1 changes its rate, top_edp outputs the wrong rate.
> - eDP display is garbled
>
> To solve this issue, remove all TVDPLL1 parents from `top_dp` and
> all TVDPLL2 parents from `top_edp`, plus, necessarily switch both
> clocks to use the new MUX_GATE_CLR_SET_UPD_INDEXED() macro to be
> able to use the right bit index for the new parents list.
>
> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
> drivers/clk/mediatek/clk-mt8195-topckgen.c | 22 ++++++++++++++--------
> 1 file changed, 14 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/clk/mediatek/clk-mt8195-topckgen.c b/drivers/clk/mediatek/clk-mt8195-topckgen.c
> index 5c426a1c94c7..4529255376e9 100644
> --- a/drivers/clk/mediatek/clk-mt8195-topckgen.c
> +++ b/drivers/clk/mediatek/clk-mt8195-topckgen.c
> @@ -417,15 +417,21 @@ static const char * const pwrmcu_parents[] = {
Nit: I'd add a comment saying this list isn't the full list for reasons.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
> static const char * const dp_parents[] = {
> "clk26m",
> - "tvdpll1_d2",
> "tvdpll2_d2",
> - "tvdpll1_d4",
> "tvdpll2_d4",
> - "tvdpll1_d8",
> "tvdpll2_d8",
> - "tvdpll1_d16",
> "tvdpll2_d16"
> };
> +static const u8 dp_parents_idx[] = { 0, 2, 4, 6, 8 };
> +
> +static const char * const edp_parents[] = {
> + "clk26m",
> + "tvdpll1_d2",
> + "tvdpll1_d4",
> + "tvdpll1_d8",
> + "tvdpll1_d16"
> +};
> +static const u8 edp_parents_idx[] = { 0, 1, 3, 5, 7 };
>
> static const char * const disp_pwm_parents[] = {
> "clk26m",
> @@ -957,11 +963,11 @@ static const struct mtk_mux top_mtk_muxes[] = {
> MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_PWRMCU, "top_pwrmcu",
> pwrmcu_parents, 0x08C, 0x090, 0x094, 16, 3, 23, 0x08, 6,
> CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
> - MUX_GATE_CLR_SET_UPD(CLK_TOP_DP, "top_dp",
> - dp_parents, 0x08C, 0x090, 0x094, 24, 4, 31, 0x08, 7),
> + MUX_GATE_CLR_SET_UPD_INDEXED(CLK_TOP_DP, "top_dp",
> + dp_parents, dp_parents_idx, 0x08C, 0x090, 0x094, 24, 4, 31, 0x08, 7),
> /* CLK_CFG_10 */
> - MUX_GATE_CLR_SET_UPD(CLK_TOP_EDP, "top_edp",
> - dp_parents, 0x098, 0x09C, 0x0A0, 0, 4, 7, 0x08, 8),
> + MUX_GATE_CLR_SET_UPD_INDEXED(CLK_TOP_EDP, "top_edp",
> + edp_parents, edp_parents_idx, 0x098, 0x09C, 0x0A0, 0, 4, 7, 0x08, 8),
> MUX_GATE_CLR_SET_UPD(CLK_TOP_DPI, "top_dpi",
> dp_parents, 0x098, 0x09C, 0x0A0, 8, 4, 15, 0x08, 9),
> MUX_GATE_CLR_SET_UPD(CLK_TOP_DISP_PWM0, "top_disp_pwm0",
> --
> 2.42.0
>
@@ -417,15 +417,21 @@ static const char * const pwrmcu_parents[] = {
static const char * const dp_parents[] = {
"clk26m",
- "tvdpll1_d2",
"tvdpll2_d2",
- "tvdpll1_d4",
"tvdpll2_d4",
- "tvdpll1_d8",
"tvdpll2_d8",
- "tvdpll1_d16",
"tvdpll2_d16"
};
+static const u8 dp_parents_idx[] = { 0, 2, 4, 6, 8 };
+
+static const char * const edp_parents[] = {
+ "clk26m",
+ "tvdpll1_d2",
+ "tvdpll1_d4",
+ "tvdpll1_d8",
+ "tvdpll1_d16"
+};
+static const u8 edp_parents_idx[] = { 0, 1, 3, 5, 7 };
static const char * const disp_pwm_parents[] = {
"clk26m",
@@ -957,11 +963,11 @@ static const struct mtk_mux top_mtk_muxes[] = {
MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_PWRMCU, "top_pwrmcu",
pwrmcu_parents, 0x08C, 0x090, 0x094, 16, 3, 23, 0x08, 6,
CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
- MUX_GATE_CLR_SET_UPD(CLK_TOP_DP, "top_dp",
- dp_parents, 0x08C, 0x090, 0x094, 24, 4, 31, 0x08, 7),
+ MUX_GATE_CLR_SET_UPD_INDEXED(CLK_TOP_DP, "top_dp",
+ dp_parents, dp_parents_idx, 0x08C, 0x090, 0x094, 24, 4, 31, 0x08, 7),
/* CLK_CFG_10 */
- MUX_GATE_CLR_SET_UPD(CLK_TOP_EDP, "top_edp",
- dp_parents, 0x098, 0x09C, 0x0A0, 0, 4, 7, 0x08, 8),
+ MUX_GATE_CLR_SET_UPD_INDEXED(CLK_TOP_EDP, "top_edp",
+ edp_parents, edp_parents_idx, 0x098, 0x09C, 0x0A0, 0, 4, 7, 0x08, 8),
MUX_GATE_CLR_SET_UPD(CLK_TOP_DPI, "top_dpi",
dp_parents, 0x098, 0x09C, 0x0A0, 8, 4, 15, 0x08, 9),
MUX_GATE_CLR_SET_UPD(CLK_TOP_DISP_PWM0, "top_disp_pwm0",