diff mbox series

[v3,2/2] mmc: rtsx: add rts5264 to support sd express card

Message ID 1143f3d4d26b4e7a8b3cc0d68caaa5ba@realtek.com
State New
Headers
Series [v3,1/2] misc: rtsx: add to support new card reader rts5264 |

Commit Message

Ricky WU Oct. 19, 2023, 3 a.m. UTC 
  add rts5264 register setting when sd express card insert

Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
---
v3: split up mmc part from v2 patch
---
 drivers/mmc/host/rtsx_pci_sdmmc.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

-- 
2.25.1

Comments

Ulf Hansson Oct. 19, 2023, 11:41 a.m. UTC | #1 
On Thu, 19 Oct 2023 at 05:01, Ricky WU <ricky_wu@realtek.com> wrote:
>
> add rts5264 register setting when sd express card insert
>
> Signed-off-by: Ricky Wu <ricky_wu@realtek.com>

I wasn't cc'd patch1 and not the mmc-list. Can you please resubmit so
we can see the complete series?

Kind regards
Uffe

> ---
> v3: split up mmc part from v2 patch
> ---
>  drivers/mmc/host/rtsx_pci_sdmmc.c | 17 ++++++++++++++++-
>  1 file changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
> index 87d78432a1e0..7dfe7c4e0077 100644
> --- a/drivers/mmc/host/rtsx_pci_sdmmc.c
> +++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
> @@ -7,6 +7,7 @@
>   *   Wei WANG <wei_wang@realsil.com.cn>
>   */
>
> +#include <linux/pci.h>
>  #include <linux/module.h>
>  #include <linux/slab.h>
>  #include <linux/highmem.h>
> @@ -947,7 +948,7 @@ static int sd_power_on(struct realtek_pci_sdmmc *host, unsigned char power_mode)
>         /* send at least 74 clocks */
>         rtsx_pci_write_register(pcr, SD_BUS_STAT, SD_CLK_TOGGLE_EN, SD_CLK_TOGGLE_EN);
>
> -       if (PCI_PID(pcr) == PID_5261) {
> +       if ((PCI_PID(pcr) == PID_5261) || (PCI_PID(pcr) == PID_5264)) {
>                 /*
>                  * If test mode is set switch to SD Express mandatorily,
>                  * this is only for factory testing.
> @@ -1364,6 +1365,14 @@ static int sdmmc_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
>         struct realtek_pci_sdmmc *host = mmc_priv(mmc);
>         struct rtsx_pcr *pcr = host->pcr;
>
> +       if (PCI_PID(pcr) == PID_5264) {
> +               pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL2,
> +                               PCI_EXP_LNKCTL2_TLS, PCI_EXP_LNKCTL2_TLS_2_5GT);
> +               pci_write_config_byte(pcr->pci, 0x80e, 0x02);
> +               pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL2,
> +                               PCI_EXP_LNKCTL2_TLS, PCI_EXP_LNKCTL2_TLS_5_0GT);
> +       }
> +
>         /* Set relink_time for changing to PCIe card */
>         relink_time = 0x8FFF;
>
> @@ -1379,6 +1388,12 @@ static int sdmmc_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
>         if (pcr->ops->disable_auto_blink)
>                 pcr->ops->disable_auto_blink(pcr);
>
> +       if (PCI_PID(pcr) == PID_5264) {
> +               rtsx_pci_write_register(pcr, RTS5264_AUTOLOAD_CFG2,
> +                       RTS5264_CHIP_RST_N_SEL, RTS5264_CHIP_RST_N_SEL);
> +               rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00);
> +       }
> +
>         /* For PCIe/NVMe mode can't enter delink issue */
>         pcr->hw_param.interrupt_en &= ~(SD_INT_EN);
>         rtsx_pci_writel(pcr, RTSX_BIER, pcr->hw_param.interrupt_en);
> --
> 2.25.1
diff mbox series

Patch

diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index 87d78432a1e0..7dfe7c4e0077 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -7,6 +7,7 @@ 
  *   Wei WANG <wei_wang@realsil.com.cn>
  */
 
+#include <linux/pci.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/highmem.h>
@@ -947,7 +948,7 @@  static int sd_power_on(struct realtek_pci_sdmmc *host, unsigned char power_mode)
 	/* send at least 74 clocks */
 	rtsx_pci_write_register(pcr, SD_BUS_STAT, SD_CLK_TOGGLE_EN, SD_CLK_TOGGLE_EN);
 
-	if (PCI_PID(pcr) == PID_5261) {
+	if ((PCI_PID(pcr) == PID_5261) || (PCI_PID(pcr) == PID_5264)) {
 		/*
 		 * If test mode is set switch to SD Express mandatorily,
 		 * this is only for factory testing.
@@ -1364,6 +1365,14 @@  static int sdmmc_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct realtek_pci_sdmmc *host = mmc_priv(mmc);
 	struct rtsx_pcr *pcr = host->pcr;
 
+	if (PCI_PID(pcr) == PID_5264) {
+		pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL2,
+				PCI_EXP_LNKCTL2_TLS, PCI_EXP_LNKCTL2_TLS_2_5GT);
+		pci_write_config_byte(pcr->pci, 0x80e, 0x02);
+		pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL2,
+				PCI_EXP_LNKCTL2_TLS, PCI_EXP_LNKCTL2_TLS_5_0GT);
+	}
+
 	/* Set relink_time for changing to PCIe card */
 	relink_time = 0x8FFF;
 
@@ -1379,6 +1388,12 @@  static int sdmmc_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (pcr->ops->disable_auto_blink)
 		pcr->ops->disable_auto_blink(pcr);
 
+	if (PCI_PID(pcr) == PID_5264) {
+		rtsx_pci_write_register(pcr, RTS5264_AUTOLOAD_CFG2,
+			RTS5264_CHIP_RST_N_SEL, RTS5264_CHIP_RST_N_SEL);
+		rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00);
+	}
+
 	/* For PCIe/NVMe mode can't enter delink issue */
 	pcr->hw_param.interrupt_en &= ~(SD_INT_EN);
 	rtsx_pci_writel(pcr, RTSX_BIER, pcr->hw_param.interrupt_en);