[v2,5/6] dt-bindings: display: Split common Solomon properties in their own schema
Commit Message
There are DT properties that can be shared across different Solomon OLED
Display Controller families. Split them into a separate common schema to
avoid these properties to be duplicated in different DT bindings schemas.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
---
(no changes since v1)
.../bindings/display/solomon,ssd-common.yaml | 42 +++++++++++++++++++
.../bindings/display/solomon,ssd1307fb.yaml | 28 +------------
MAINTAINERS | 1 +
3 files changed, 44 insertions(+), 27 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/solomon,ssd-common.yaml
Comments
On Thu, 12 Oct 2023 08:58:14 +0200, Javier Martinez Canillas wrote:
> There are DT properties that can be shared across different Solomon OLED
> Display Controller families. Split them into a separate common schema to
> avoid these properties to be duplicated in different DT bindings schemas.
>
> Suggested-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
> ---
>
> (no changes since v1)
>
> .../bindings/display/solomon,ssd-common.yaml | 42 +++++++++++++++++++
> .../bindings/display/solomon,ssd1307fb.yaml | 28 +------------
> MAINTAINERS | 1 +
> 3 files changed, 44 insertions(+), 27 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/display/solomon,ssd-common.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
./Documentation/devicetree/bindings/display/solomon,ssd-common.yaml:42:27: [error] no new line character at the end of file (new-line-at-end-of-file)
dtschema/dtc warnings/errors:
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231012065822.1007930-6-javierm@redhat.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Hi Javier,
On Thu, Oct 12, 2023 at 8:58 AM Javier Martinez Canillas
<javierm@redhat.com> wrote:
> There are DT properties that can be shared across different Solomon OLED
> Display Controller families. Split them into a separate common schema to
> avoid these properties to be duplicated in different DT bindings schemas.
>
> Suggested-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
> ---
>
> (no changes since v1)
New patch in v2.
Gr{oetje,eeting}s,
Geert
Geert Uytterhoeven <geert@linux-m68k.org> writes:
> Hi Javier,
>
> On Thu, Oct 12, 2023 at 8:58 AM Javier Martinez Canillas
> <javierm@redhat.com> wrote:
>> There are DT properties that can be shared across different Solomon OLED
>> Display Controller families. Split them into a separate common schema to
>> avoid these properties to be duplicated in different DT bindings schemas.
>>
>> Suggested-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
>> ---
>>
>> (no changes since v1)
>
> New patch in v2.
>
Yeah, I mention that in the cover letter. That "(no changes since...)"
message is automatically added by the tool I use to post patches (patman)
for all patches that don't have a change history, even for new patches in
a series revision. And I don't know of a way to disable it...
Maybe what I should do is to add a change history to new patches mentioned
that is a new patch to prevent this message to appear.
On Thu, Oct 12, 2023 at 08:58:14AM +0200, Javier Martinez Canillas wrote:
> There are DT properties that can be shared across different Solomon OLED
> Display Controller families. Split them into a separate common schema to
> avoid these properties to be duplicated in different DT bindings schemas.
>
> Suggested-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
> ---
>
> (no changes since v1)
>
> .../bindings/display/solomon,ssd-common.yaml | 42 +++++++++++++++++++
> .../bindings/display/solomon,ssd1307fb.yaml | 28 +------------
> MAINTAINERS | 1 +
> 3 files changed, 44 insertions(+), 27 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/display/solomon,ssd-common.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/solomon,ssd-common.yaml b/Documentation/devicetree/bindings/display/solomon,ssd-common.yaml
> new file mode 100644
> index 000000000000..677fd2b90960
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/solomon,ssd-common.yaml
> @@ -0,0 +1,42 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/solomon,ssd-common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Common properties for Solomon OLED Display Controllers
> +
> +maintainers:
> + - Javier Martinez Canillas <javierm@redhat.com>
> +
> +properties:
> + reg:
> + maxItems: 1
> +
> + reset-gpios:
> + maxItems: 1
> +
> + # Only required for SPI
> + dc-gpios:
> + description:
> + GPIO connected to the controller's D/C# (Data/Command) pin,
> + that is needed for 4-wire SPI to tell the controller if the
> + data sent is for a command register or the display data RAM
> + maxItems: 1
> +
> + solomon,height:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Height in pixel of the screen driven by the controller.
> + The default value is controller-dependent.
> +
> + solomon,width:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Width in pixel of the screen driven by the controller.
> + The default value is controller-dependent.
> +
> +allOf:
> + - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +additionalProperties: true
> \ No newline at end of file
With this fixed,
Reviewed-by: Rob Herring <robh@kernel.org>
new file mode 100644
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/solomon,ssd-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for Solomon OLED Display Controllers
+
+maintainers:
+ - Javier Martinez Canillas <javierm@redhat.com>
+
+properties:
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ # Only required for SPI
+ dc-gpios:
+ description:
+ GPIO connected to the controller's D/C# (Data/Command) pin,
+ that is needed for 4-wire SPI to tell the controller if the
+ data sent is for a command register or the display data RAM
+ maxItems: 1
+
+ solomon,height:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Height in pixel of the screen driven by the controller.
+ The default value is controller-dependent.
+
+ solomon,width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Width in pixel of the screen driven by the controller.
+ The default value is controller-dependent.
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+additionalProperties: true
\ No newline at end of file
@@ -27,38 +27,12 @@ properties:
- solomon,ssd1307
- solomon,ssd1309
- reg:
- maxItems: 1
-
pwms:
maxItems: 1
- reset-gpios:
- maxItems: 1
-
- # Only required for SPI
- dc-gpios:
- description:
- GPIO connected to the controller's D/C# (Data/Command) pin,
- that is needed for 4-wire SPI to tell the controller if the
- data sent is for a command register or the display data RAM
- maxItems: 1
-
vbat-supply:
description: The supply for VBAT
- solomon,height:
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- Height in pixel of the screen driven by the controller.
- The default value is controller-dependent.
-
- solomon,width:
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- Width in pixel of the screen driven by the controller.
- The default value is controller-dependent.
-
solomon,page-offset:
$ref: /schemas/types.yaml#/definitions/uint32
default: 1
@@ -148,7 +122,7 @@ required:
- reg
allOf:
- - $ref: /schemas/spi/spi-peripheral-props.yaml#
+ - $ref: solomon,ssd-common.yaml#
- if:
properties:
@@ -6732,6 +6732,7 @@ DRM DRIVER FOR SOLOMON SSD130X OLED DISPLAYS
M: Javier Martinez Canillas <javierm@redhat.com>
S: Maintained
T: git git://anongit.freedesktop.org/drm/drm-misc
+F: Documentation/devicetree/bindings/display/solomon,ssd-common.yaml
F: Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
F: drivers/gpu/drm/solomon/ssd130x*