diff mbox series

[1/1] gpio: tegra186: Set fwnode of the GPIO chip

Message ID 20231009173858.723686-1-dipenp@nvidia.com
State New
Headers
Series [1/1] gpio: tegra186: Set fwnode of the GPIO chip |

Commit Message

Dipen Patel Oct. 9, 2023, 5:38 p.m. UTC 
  Any driver that depends on the GPIO match function to locate the GPIO
controller, it has to use the fwnode from the gpio_chip structure. But
with [1], it is GPIO providers job to set any members of the gpio_chip
structure. This patch addresses that.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux.git/patch/drivers/gpio/gpiolib.c?id=daecca4b8433d47f0db4933bcc0f283d530ba22e

Signed-off-by: Dipen Patel <dipenp@nvidia.com>
---
 drivers/gpio/gpio-tegra186.c | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

andy@kernel.org Oct. 10, 2023, 1:13 p.m. UTC | #1 
On Mon, Oct 09, 2023 at 10:38:58AM -0700, Dipen Patel wrote:

Tbank you! My comments below.

> Any driver that depends on the GPIO match function to locate the GPIO
> controller, it has to use the fwnode from the gpio_chip structure. But
> with [1], it is GPIO providers job to set any members of the gpio_chip
> structure. This patch addresses that.

> [1] https://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux.git/patch/drivers/gpio/gpiolib.c?id=daecca4b8433d47f0db4933bcc0f283d530ba22e

Use Link: tag for this?

...

> +	/*
> +	 * This is needed for driver using gpio device matching where it
> +	 * has to use gpio_chip fwnode to match the gpio controller.
> +	 */
> +	gpio->gpio.fwnode = of_node_to_fwnode(pdev->dev.of_node);

of_node_to_fwnode() is specific to IRQ, in other places we use generic
of_fwnode_handle(). That's why better just to use dev_fwnode().

...

With the above addressed:
Reviewed-by: Andy Shevchenko <andy@kernel.org>
andy@kernel.org Oct. 10, 2023, 1:48 p.m. UTC | #2 
On Tue, Oct 10, 2023 at 04:13:19PM +0300, Andy Shevchenko wrote:
> On Mon, Oct 09, 2023 at 10:38:58AM -0700, Dipen Patel wrote:

...

> > +	/*
> > +	 * This is needed for driver using gpio device matching where it
> > +	 * has to use gpio_chip fwnode to match the gpio controller.
> > +	 */
> > +	gpio->gpio.fwnode = of_node_to_fwnode(pdev->dev.of_node);
> 
> of_node_to_fwnode() is specific to IRQ, in other places we use generic
> of_fwnode_handle(). That's why better just to use dev_fwnode().

On the second thought is there any parent assigned?
At least I see that in tegra186_gpio_probe(). Are you saying
it is not working? Or is it (matching) called _before_ we
add a GPIO device?
andy@kernel.org Oct. 10, 2023, 2:13 p.m. UTC | #3 
On Tue, Oct 10, 2023 at 04:48:25PM +0300, Andy Shevchenko wrote:
> On Tue, Oct 10, 2023 at 04:13:19PM +0300, Andy Shevchenko wrote:
> > On Mon, Oct 09, 2023 at 10:38:58AM -0700, Dipen Patel wrote:

...

> > > +	/*
> > > +	 * This is needed for driver using gpio device matching where it
> > > +	 * has to use gpio_chip fwnode to match the gpio controller.
> > > +	 */
> > > +	gpio->gpio.fwnode = of_node_to_fwnode(pdev->dev.of_node);
> > 
> > of_node_to_fwnode() is specific to IRQ, in other places we use generic
> > of_fwnode_handle(). That's why better just to use dev_fwnode().
> 
> On the second thought is there any parent assigned?
> At least I see that in tegra186_gpio_probe(). Are you saying
> it is not working? Or is it (matching) called _before_ we
> add a GPIO device?

Okay, I think I got it. There is a function called tegra_gpiochip_match()
in drivers/hte/hte-tegra194.c which fails after my patch. Yeah, if provider
doesn't set fwnode, it can't match. But, since the driver sets the parent
properly it means that the matching function should be done against the
device.

Seems to me that in HTE code the matching function is broken.
andy@kernel.org Oct. 10, 2023, 2:25 p.m. UTC | #4 
On Tue, Oct 10, 2023 at 05:13:42PM +0300, Andy Shevchenko wrote:
> On Tue, Oct 10, 2023 at 04:48:25PM +0300, Andy Shevchenko wrote:
> > On Tue, Oct 10, 2023 at 04:13:19PM +0300, Andy Shevchenko wrote:
> > > On Mon, Oct 09, 2023 at 10:38:58AM -0700, Dipen Patel wrote:

...

> > > > +	/*
> > > > +	 * This is needed for driver using gpio device matching where it
> > > > +	 * has to use gpio_chip fwnode to match the gpio controller.
> > > > +	 */
> > > > +	gpio->gpio.fwnode = of_node_to_fwnode(pdev->dev.of_node);
> > > 
> > > of_node_to_fwnode() is specific to IRQ, in other places we use generic
> > > of_fwnode_handle(). That's why better just to use dev_fwnode().
> > 
> > On the second thought is there any parent assigned?
> > At least I see that in tegra186_gpio_probe(). Are you saying
> > it is not working? Or is it (matching) called _before_ we
> > add a GPIO device?
> 
> Okay, I think I got it. There is a function called tegra_gpiochip_match()
> in drivers/hte/hte-tegra194.c which fails after my patch. Yeah, if provider
> doesn't set fwnode, it can't match. But, since the driver sets the parent
> properly it means that the matching function should be done against the
> device.
> 
> Seems to me that in HTE code the matching function is broken.

I'll send a patch soon. Please, test it.
Bartosz Golaszewski Oct. 10, 2023, 3:10 p.m. UTC | #5 
On Tue, Oct 10, 2023 at 4:25 PM Andy Shevchenko <andy@kernel.org> wrote:
>
> On Tue, Oct 10, 2023 at 05:13:42PM +0300, Andy Shevchenko wrote:
> > On Tue, Oct 10, 2023 at 04:48:25PM +0300, Andy Shevchenko wrote:
> > > On Tue, Oct 10, 2023 at 04:13:19PM +0300, Andy Shevchenko wrote:
> > > > On Mon, Oct 09, 2023 at 10:38:58AM -0700, Dipen Patel wrote:
>
> ...
>
> > > > > +       /*
> > > > > +        * This is needed for driver using gpio device matching where it
> > > > > +        * has to use gpio_chip fwnode to match the gpio controller.
> > > > > +        */
> > > > > +       gpio->gpio.fwnode = of_node_to_fwnode(pdev->dev.of_node);
> > > >
> > > > of_node_to_fwnode() is specific to IRQ, in other places we use generic
> > > > of_fwnode_handle(). That's why better just to use dev_fwnode().
> > >
> > > On the second thought is there any parent assigned?
> > > At least I see that in tegra186_gpio_probe(). Are you saying
> > > it is not working? Or is it (matching) called _before_ we
> > > add a GPIO device?
> >
> > Okay, I think I got it. There is a function called tegra_gpiochip_match()
> > in drivers/hte/hte-tegra194.c which fails after my patch. Yeah, if provider
> > doesn't set fwnode, it can't match. But, since the driver sets the parent
> > properly it means that the matching function should be done against the
> > device.
> >
> > Seems to me that in HTE code the matching function is broken.
>
> I'll send a patch soon. Please, test it.
>

I'll have you know that if it is about to add any new "#include
../gpio/gpiolib.h", then it's a preemptive NAK from me. :)

Bart
andy@kernel.org Oct. 10, 2023, 3:18 p.m. UTC | #6 
On Tue, Oct 10, 2023 at 05:10:08PM +0200, Bartosz Golaszewski wrote:
> On Tue, Oct 10, 2023 at 4:25 PM Andy Shevchenko <andy@kernel.org> wrote:
> > On Tue, Oct 10, 2023 at 05:13:42PM +0300, Andy Shevchenko wrote:
> > > On Tue, Oct 10, 2023 at 04:48:25PM +0300, Andy Shevchenko wrote:
> > > > On Tue, Oct 10, 2023 at 04:13:19PM +0300, Andy Shevchenko wrote:
> > > > > On Mon, Oct 09, 2023 at 10:38:58AM -0700, Dipen Patel wrote:

...

> > > > > > +       /*
> > > > > > +        * This is needed for driver using gpio device matching where it
> > > > > > +        * has to use gpio_chip fwnode to match the gpio controller.
> > > > > > +        */
> > > > > > +       gpio->gpio.fwnode = of_node_to_fwnode(pdev->dev.of_node);
> > > > >
> > > > > of_node_to_fwnode() is specific to IRQ, in other places we use generic
> > > > > of_fwnode_handle(). That's why better just to use dev_fwnode().
> > > >
> > > > On the second thought is there any parent assigned?
> > > > At least I see that in tegra186_gpio_probe(). Are you saying
> > > > it is not working? Or is it (matching) called _before_ we
> > > > add a GPIO device?
> > >
> > > Okay, I think I got it. There is a function called tegra_gpiochip_match()
> > > in drivers/hte/hte-tegra194.c which fails after my patch. Yeah, if provider
> > > doesn't set fwnode, it can't match. But, since the driver sets the parent
> > > properly it means that the matching function should be done against the
> > > device.
> > >
> > > Seems to me that in HTE code the matching function is broken.
> >
> > I'll send a patch soon. Please, test it.
> 
> I'll have you know that if it is about to add any new "#include
> ../gpio/gpiolib.h", then it's a preemptive NAK from me. :)

Nope, see I just sent it.
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c
index d87dd06db40d..86ad34e07841 100644
--- a/drivers/gpio/gpio-tegra186.c
+++ b/drivers/gpio/gpio-tegra186.c
@@ -989,6 +989,12 @@  static int tegra186_gpio_probe(struct platform_device *pdev)
 		offset += port->pins;
 	}
 
+	/*
+	 * This is needed for driver using gpio device matching where it
+	 * has to use gpio_chip fwnode to match the gpio controller.
+	 */
+	gpio->gpio.fwnode = of_node_to_fwnode(pdev->dev.of_node);
+
 	return devm_gpiochip_add_data(&pdev->dev, &gpio->gpio, gpio);
 }