diff mbox series

[4/5] riscv: dts: sophgo: add initial CV1812H SoC device tree

Message ID IA1PR20MB495360B632D106BBB833D82ABBCFA@IA1PR20MB4953.namprd20.prod.outlook.com
State New
Headers
Series Add Huashan Pi board support |

Commit Message

Inochi Amaoto Oct. 8, 2023, 11:16 a.m. UTC 
  Add initial device tree for the CV1812H RISC-V SoC by SOPHGO.

Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
---
 arch/riscv/boot/dts/sophgo/cv1800b.dtsi |  95 +------------
 arch/riscv/boot/dts/sophgo/cv180x.dtsi  | 178 ++++++++++++++++++++++++
 arch/riscv/boot/dts/sophgo/cv1812h.dtsi |  36 +++++
 3 files changed, 215 insertions(+), 94 deletions(-)
 create mode 100644 arch/riscv/boot/dts/sophgo/cv180x.dtsi
 create mode 100644 arch/riscv/boot/dts/sophgo/cv1812h.dtsi

--
2.42.0

Comments

Krzysztof Kozlowski Oct. 8, 2023, 11:22 a.m. UTC | #1 
On 08/10/2023 13:16, Inochi Amaoto wrote:
> Add initial device tree for the CV1812H RISC-V SoC by SOPHGO.
> 
> Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
> ---
>  arch/riscv/boot/dts/sophgo/cv1800b.dtsi |  95 +------------
>  arch/riscv/boot/dts/sophgo/cv180x.dtsi  | 178 ++++++++++++++++++++++++
>  arch/riscv/boot/dts/sophgo/cv1812h.dtsi |  36 +++++

You need to split moving existing code into common file and then send it
with proper -M/-B/-C argument so the move/copy will be detected.

Best regards,
Krzysztof
Inochi Amaoto Oct. 9, 2023, 11:32 a.m. UTC | #2 
>On 08/10/2023 13:16, Inochi Amaoto wrote:
>> Add initial device tree for the CV1812H RISC-V SoC by SOPHGO.
>>
>> Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
>> ---
>>  arch/riscv/boot/dts/sophgo/cv1800b.dtsi |  95 +------------
>>  arch/riscv/boot/dts/sophgo/cv180x.dtsi  | 178 ++++++++++++++++++++++++
>>  arch/riscv/boot/dts/sophgo/cv1812h.dtsi |  36 +++++
>
>You need to split moving existing code into common file and then send it
>with proper -M/-B/-C argument so the move/copy will be detected.
>
>Best regards,
>Krzysztof
>

Thanks for reminding me. It seems only -C work for this.
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
index df40e87ee063..0904154f9829 100644
--- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
+++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
@@ -3,106 +3,13 @@ 
  * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
  */

-#include <dt-bindings/interrupt-controller/irq.h>
+#include "cv180x.dtsi"

 / {
 	compatible = "sophgo,cv1800b";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		timebase-frequency = <25000000>;
-
-		cpu0: cpu@0 {
-			compatible = "thead,c906", "riscv";
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-block-size = <64>;
-			d-cache-sets = <512>;
-			d-cache-size = <65536>;
-			i-cache-block-size = <64>;
-			i-cache-sets = <128>;
-			i-cache-size = <32768>;
-			mmu-type = "riscv,sv39";
-			riscv,isa = "rv64imafdc";
-			riscv,isa-base = "rv64i";
-			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
-					       "zifencei", "zihpm";
-
-			cpu0_intc: interrupt-controller {
-				compatible = "riscv,cpu-intc";
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
-	osc: oscillator {
-		compatible = "fixed-clock";
-		clock-output-names = "osc_25m";
-		#clock-cells = <0>;
-	};

 	soc {
-		compatible = "simple-bus";
 		interrupt-parent = <&plic>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		dma-noncoherent;
-		ranges;
-
-		uart0: serial@4140000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04140000 0x100>;
-			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart1: serial@4150000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04150000 0x100>;
-			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart2: serial@4160000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04160000 0x100>;
-			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart3: serial@4170000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04170000 0x100>;
-			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart4: serial@41c0000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x041c0000 0x100>;
-			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};

 		plic: interrupt-controller@70000000 {
 			compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
diff --git a/arch/riscv/boot/dts/sophgo/cv180x.dtsi b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
new file mode 100644
index 000000000000..64ffb23d3626
--- /dev/null
+++ b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
@@ -0,0 +1,178 @@ 
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
+ * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <25000000>;
+
+		cpu0: cpu@0 {
+			compatible = "thead,c906", "riscv";
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <512>;
+			d-cache-size = <65536>;
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			mmu-type = "riscv,sv39";
+			riscv,isa = "rv64imafdc";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
+					       "zifencei", "zihpm";
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	osc: oscillator {
+		compatible = "fixed-clock";
+		clock-output-names = "osc_25m";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		dma-noncoherent;
+		ranges;
+
+		gpio0: gpio@3020000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3020000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio1: gpio@3021000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3021000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio2: gpio@3022000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3022000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			portc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio3: gpio@3023000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3023000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			portd: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		uart0: serial@4140000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04140000 0x100>;
+			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: serial@4150000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04150000 0x100>;
+			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart2: serial@4160000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04160000 0x100>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart3: serial@4170000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04170000 0x100>;
+			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart4: serial@41c0000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x041c0000 0x100>;
+			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/sophgo/cv1812h.dtsi b/arch/riscv/boot/dts/sophgo/cv1812h.dtsi
new file mode 100644
index 000000000000..3864d34b0100
--- /dev/null
+++ b/arch/riscv/boot/dts/sophgo/cv1812h.dtsi
@@ -0,0 +1,36 @@ 
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "cv180x.dtsi"
+
+/ {
+	compatible = "sophgo,cv1812h";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	soc {
+		interrupt-parent = <&plic>;
+
+		plic: interrupt-controller@70000000 {
+			compatible = "sophgo,cv1812h-plic", "thead,c900-plic";
+			reg = <0x70000000 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			riscv,ndev = <101>;
+		};
+
+		clint: timer@74000000 {
+			compatible = "sophgo,cv1812h-clint", "thead,c900-clint";
+			reg = <0x74000000 0x10000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
+		};
+	};
+};