[08/11] MIPS: mobileye: Add EyeQ5 dtsi
Commit Message
Add a device tree include file for the Mobileye EyeQ5 SoC.
Based on the work of Slava Samsonov <stanislav.samsonov@intel.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/mobileye/Makefile | 4 +
.../boot/dts/mobileye/eyeq5-fixed-clocks.dtsi | 315 ++++++++++++++++++
arch/mips/boot/dts/mobileye/eyeq5.dtsi | 138 ++++++++
4 files changed, 458 insertions(+)
create mode 100644 arch/mips/boot/dts/mobileye/Makefile
create mode 100644 arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi
create mode 100644 arch/mips/boot/dts/mobileye/eyeq5.dtsi
Comments
On Wed, Oct 4, 2023 at 11:11 AM Gregory CLEMENT
<gregory.clement@bootlin.com> wrote:
>
> Add a device tree include file for the Mobileye EyeQ5 SoC.
>
> Based on the work of Slava Samsonov <stanislav.samsonov@intel.com>
>
> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ---
> arch/mips/boot/dts/Makefile | 1 +
> arch/mips/boot/dts/mobileye/Makefile | 4 +
> .../boot/dts/mobileye/eyeq5-fixed-clocks.dtsi | 315 ++++++++++++++++++
> arch/mips/boot/dts/mobileye/eyeq5.dtsi | 138 ++++++++
> 4 files changed, 458 insertions(+)
> create mode 100644 arch/mips/boot/dts/mobileye/Makefile
> create mode 100644 arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi
> create mode 100644 arch/mips/boot/dts/mobileye/eyeq5.dtsi
>
> diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
> index 928f38a79dff..edb8e8dee758 100644
> --- a/arch/mips/boot/dts/Makefile
> +++ b/arch/mips/boot/dts/Makefile
> @@ -8,6 +8,7 @@ subdir-$(CONFIG_LANTIQ) += lantiq
> subdir-$(CONFIG_MACH_LOONGSON64) += loongson
> subdir-$(CONFIG_SOC_VCOREIII) += mscc
> subdir-$(CONFIG_MIPS_MALTA) += mti
> +subdir-$(CONFIG_SOC_EYEQ5) += mobileye
> subdir-$(CONFIG_LEGACY_BOARD_SEAD3) += mti
> subdir-$(CONFIG_FIT_IMAGE_FDT_NI169445) += ni
> subdir-$(CONFIG_MACH_PIC32) += pic32
> diff --git a/arch/mips/boot/dts/mobileye/Makefile b/arch/mips/boot/dts/mobileye/Makefile
> new file mode 100644
> index 000000000000..99c4124fd4c0
> --- /dev/null
> +++ b/arch/mips/boot/dts/mobileye/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +# Copyright 2023 Mobileye Vision Technologies Ltd.
> +
> +obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
You didn't add anything to 'dtb-y'. Did you test this?
Also, CONFIG_BUILTIN_DTB is supposed to be for legacy bootloaders
which don't understand DT. For a new SoC, fix the bootloader.
> diff --git a/arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi b/arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi
> new file mode 100644
> index 000000000000..a0066465ac8b
> --- /dev/null
> +++ b/arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi
> @@ -0,0 +1,315 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +/*
> + * Copyright 2023 Mobileye Vision Technologies Ltd.
> + */
I assume these aren't all really fixed, but just 'I don't have a clock
driver yet'. That creates an ABI issue when you add the clock
driver(s). Just FYI.
> +
> +/ {
> + /* Fixed clock */
> + pll_cpu: pll_cpu {
Don't use _ in node names.
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <1500000000>;
> + };
> +
> + pll_vdi: pll_vdi {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <1280000000>;
> + };
> +
> + pll_per: pll_per {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <2000000000>;
> + };
> +
> + pll_ddr0: pll_ddr0 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <1857210000>;
> + };
> +
> + pll_ddr1: pll_ddr1 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <1857210000>;
> + };
> +
> +/* PLL_CPU derivatives */
> + occ_cpu: occ_cpu {
> + compatible = "fixed-factor-clock";
> + clocks = <&pll_cpu>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "occ_cpu";
Isn't the default name the node name? Drop these unless you really
have a need and they aren't redundant.
> + };
> + si_css0_ref_clk: si_css0_ref_clk { /* gate ClkRstGen_si_css0_ref */
> + compatible = "fixed-factor-clock";
> + clocks = <&occ_cpu>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "si_css0_ref_clk";
> + };
> + cpc_clk: cpc_clk {
> + compatible = "fixed-factor-clock";
> + clocks = <&si_css0_ref_clk>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "cpc_clk";
> + };
> + core0_clk: core0_clk {
> + compatible = "fixed-factor-clock";
> + clocks = <&si_css0_ref_clk>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "core0_clk";
> + };
> + core1_clk: core1_clk {
> + compatible = "fixed-factor-clock";
> + clocks = <&si_css0_ref_clk>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "core1_clk";
> + };
> + core2_clk: core2_clk {
> + compatible = "fixed-factor-clock";
> + clocks = <&si_css0_ref_clk>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "core2_clk";
> + };
> + core3_clk: core3_clk {
> + compatible = "fixed-factor-clock";
> + clocks = <&si_css0_ref_clk>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "core3_clk";
> + };
> + cm_clk: cm_clk {
> + compatible = "fixed-factor-clock";
> + clocks = <&si_css0_ref_clk>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "cm_clk";
> + };
> + mem_clk: mem_clk {
> + compatible = "fixed-factor-clock";
> + clocks = <&si_css0_ref_clk>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "mem_clk";
> + };
> + occ_isram: occ_isram {
> + compatible = "fixed-factor-clock";
> + clocks = <&pll_cpu>;
> + #clock-cells = <0>;
> + clock-div = <2>;
> + clock-mult = <1>;
> + clock-output-names = "occ_isram";
> + };
> + isram_clk: isram_clk { /* gate ClkRstGen_isram */
> + compatible = "fixed-factor-clock";
> + clocks = <&occ_isram>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "isram_clk";
> + };
> + occ_dbu: occ_dbu {
> + compatible = "fixed-factor-clock";
> + clocks = <&pll_cpu>;
> + #clock-cells = <0>;
> + clock-div = <10>;
> + clock-mult = <1>;
> + clock-output-names = "occ_dbu";
> + };
> + si_dbu_tp_pclk: si_dbu_tp_pclk { /* gate ClkRstGen_dbu */
> + compatible = "fixed-factor-clock";
> + clocks = <&occ_dbu>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "si_dbu_tp_pclk";
> + };
> +/* PLL_VDI derivatives */
> + occ_vdi: occ_vdi {
> + compatible = "fixed-factor-clock";
> + clocks = <&pll_vdi>;
> + #clock-cells = <0>;
> + clock-div = <2>;
> + clock-mult = <1>;
> + clock-output-names = "occ_vdi";
> + };
> + vdi_clk: vdi_clk { /* gate ClkRstGen_vdi */
> + compatible = "fixed-factor-clock";
> + clocks = <&occ_vdi>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "vdi_clk";
> + };
> + occ_can_ser: occ_can_ser {
> + compatible = "fixed-factor-clock";
> + clocks = <&pll_vdi>;
> + #clock-cells = <0>;
> + clock-div = <16>;
> + clock-mult = <1>;
> + clock-output-names = "occ_can_ser";
> + };
> + can_ser_clk: can_ser_clk { /* gate ClkRstGen_can_ser */
> + compatible = "fixed-factor-clock";
> + clocks = <&occ_can_ser>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "can_ser_clk";
> + };
> + i2c_ser_clk: i2c_ser_clk {
> + compatible = "fixed-factor-clock";
> + clocks = <&pll_vdi>;
> + #clock-cells = <0>;
> + clock-div = <20>;
> + clock-mult = <1>;
> + clock-output-names = "i2c_ser_clk";
> + };
> +/* PLL_PER derivatives */
> + occ_periph: occ_periph {
> + compatible = "fixed-factor-clock";
> + clocks = <&pll_per>;
> + #clock-cells = <0>;
> + clock-div = <16>;
> + clock-mult = <1>;
> + clock-output-names = "occ_periph";
> + };
> + periph_clk: periph_clk {
> + compatible = "fixed-factor-clock";
> + clocks = <&occ_periph>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "periph_clk";
> + };
> + can_clk: can_clk {
> + compatible = "fixed-factor-clock";
> + clocks = <&occ_periph>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "can_clk";
> + };
> + spi_clk: spi_clk {
> + compatible = "fixed-factor-clock";
> + clocks = <&occ_periph>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "spi_clk";
> + };
> + uart_clk: uart_clk {
> + compatible = "fixed-factor-clock";
> + clocks = <&occ_periph>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "uart_clk";
> + };
> + i2c_clk: i2c_clk {
> + compatible = "fixed-factor-clock";
> + clocks = <&occ_periph>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "i2c_clk";
> + };
> + timer_clk: timer_clk {
> + compatible = "fixed-factor-clock";
> + clocks = <&occ_periph>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "timer_clk";
> + };
> + gpio_clk: gpio_clk {
> + compatible = "fixed-factor-clock";
> + clocks = <&occ_periph>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "gpio_clk";
> + };
> + emmc_sys_clk: emmc_sys_clk {
> + compatible = "fixed-factor-clock";
> + clocks = <&pll_per>;
> + #clock-cells = <0>;
> + clock-div = <10>;
> + clock-mult = <1>;
> + clock-output-names = "emmc_sys_clk";
> + };
> + ccf_ctrl_clk: ccf_ctrl_clk {
> + compatible = "fixed-factor-clock";
> + clocks = <&pll_per>;
> + #clock-cells = <0>;
> + clock-div = <4>;
> + clock-mult = <1>;
> + clock-output-names = "ccf_ctrl_clk";
> + };
> + occ_mjpeg_core: occ_mjpeg_core {
> + compatible = "fixed-factor-clock";
> + clocks = <&pll_per>;
> + #clock-cells = <0>;
> + clock-div = <2>;
> + clock-mult = <1>;
> + clock-output-names = "occ_mjpeg_core";
> + };
> + hsm_clk: hsm_clk { /* gate ClkRstGen_hsm */
> + compatible = "fixed-factor-clock";
> + clocks = <&occ_mjpeg_core>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "hsm_clk";
> + };
> + mjpeg_core_clk: mjpeg_core_clk { /* gate ClkRstGen_mjpeg_gen */
> + compatible = "fixed-factor-clock";
> + clocks = <&occ_mjpeg_core>;
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clock-output-names = "mjpeg_core_clk";
> + };
> + fcmu_a_clk: fcmu_a_clk {
> + compatible = "fixed-factor-clock";
> + clocks = <&pll_per>;
> + #clock-cells = <0>;
> + clock-div = <20>;
> + clock-mult = <1>;
> + clock-output-names = "fcmu_a_clk";
> + };
> + occ_pci_sys: occ_pci_sys {
> + compatible = "fixed-factor-clock";
> + clocks = <&pll_per>;
> + #clock-cells = <0>;
> + clock-div = <8>;
> + clock-mult = <1>;
> + clock-output-names = "occ_pci_sys";
> + };
> + pclk: pclk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <250000000>; /* 250MHz */
> + };
> + tsu_clk: tsu_clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <125000000>; /* 125MHz */
> + };
> +};
> diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
> new file mode 100644
> index 000000000000..0504c2fb3ad5
> --- /dev/null
> +++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
> @@ -0,0 +1,138 @@
> +// SPDX-License-Identifier: GPL-2.0
Doesn't match eyeq5-fixed-clocks.dtsi
> +/*
> + * Copyright 2023 Mobileye Vision Technologies Ltd.
> + */
> +
> +#include <dt-bindings/interrupt-controller/mips-gic.h>
> +#include <dt-bindings/soc/mobileye,eyeq5.h>
> +
> +/memreserve/ 0x40000000 0xc0000000; /* DDR32 */
> +/memreserve/ 0x08000000 0x08000000; /* DDR_LOW */
> +
> +#include "eyeq5-fixed-clocks.dtsi"
> +
> +/* almost all GIC IRQs has the same characteristics. provide short form */
Maybe so, but I prefer not having 2 levels of lookup to figure out values.
> +#define GIC_IRQ(x) GIC_SHARED (x) IRQ_TYPE_LEVEL_HIGH
> +
> +/ {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "mti,i6500";
> + reg = <0>;
> + clocks = <&core0_clk>;
> + };
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> +/* These reserved memory regions are also defined in bootmanager
> + * for configuring inbound translation for BARS, don't change
> + * these without syncing with bootmanager
> + */
Indent with the rest of the node.
> + shmem0_reserved: shmem@804000000 {
> + reg = <0x8 0x04000000 0x0 0x1000000>;
> + };
> + shmem1_reserved: shmem@805000000 {
> + reg = <0x8 0x05000000 0x0 0x1000000>;
> + };
> + pci0_msi_reserved: pci0_msi@806000000 {
> + reg = <0x8 0x06000000 0x0 0x100000>;
> + };
> + pci1_msi_reserved: pci1_msi@806100000 {
> + reg = <0x8 0x06100000 0x0 0x100000>;
> + };
> +
> + mini_coredump0_reserved: mini_coredump0@806200000 {
> + reg = <0x8 0x06200000 0x0 0x100000>;
> + };
> + mhm_reserved_0: the_mhm_reserved_0@0 {
> + reg = <0x8 0x00000000 0x0 0x0000800>;
> + };
> + };
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + serial2 = &uart2;
> + };
> +
> + cpu_intc: interrupt-controller {
> + compatible = "mti,cpu-interrupt-controller";
> + interrupt-controller;
> + #address-cells = <0>;
> + #interrupt-cells = <1>;
> + };
> +
> + gic: interrupt-controller@140000 {
> + compatible = "mti,gic";
> + reg = <0x0 0x140000 0x0 0x20000>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> +
> + /*
> + * Declare the interrupt-parent even though the mti,gic
> + * binding doesn't require it, such that the kernel can
> + * figure out that cpu_intc is the root interrupt
> + * controller & should be probed first.
> + */
> + interrupt-parent = <&cpu_intc>;
> +
> + timer {
> + compatible = "mti,gic-timer";
> + interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
> + clocks = <&core0_clk>;
> + };
> + };
> +
> + soc: soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + compatible = "simple-bus";
> +
> + uart0: serial@800000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0 0x800000 0x0 0x1000>;
> + reg-io-width = <4>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_IRQ(NUM_INT_UART)>;
> + clocks = <&uart_clk>, <&occ_periph>;
> + clock-names = "uartclk", "apb_pclk";
> + };
> +
> + uart1: serial@900000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0 0x900000 0x0 0x1000>;
> + reg-io-width = <4>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_IRQ(NUM_INT_UART)>;
> + clocks = <&uart_clk>, <&occ_periph>;
> + clock-names = "uartclk", "apb_pclk";
> + };
> +
> + uart2: serial@a00000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0 0xa00000 0x0 0x1000>;
> + reg-io-width = <4>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_IRQ(NUM_INT_UART)>;
> + clocks = <&uart_clk>, <&occ_periph>;
> + clock-names = "uartclk", "apb_pclk";
> + };
> +
> + olb: olb@e00000 {
> + compatible = "mobileye,eyeq5-olb", "syscon", "simple-mfd";
> + reg = <0 0xe00000 0x0 0x400>;
> + reg-io-width = <4>;
> + };
> +
> + };
> +};
> --
> 2.40.1
>
Hello Rob,
> On Wed, Oct 4, 2023 at 11:11 AM Gregory CLEMENT
> <gregory.clement@bootlin.com> wrote:
>>
>> Add a device tree include file for the Mobileye EyeQ5 SoC.
>>
>> Based on the work of Slava Samsonov <stanislav.samsonov@intel.com>
>>
>> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
>> ---
>> arch/mips/boot/dts/Makefile | 1 +
>> arch/mips/boot/dts/mobileye/Makefile | 4 +
>> .../boot/dts/mobileye/eyeq5-fixed-clocks.dtsi | 315 ++++++++++++++++++
>> arch/mips/boot/dts/mobileye/eyeq5.dtsi | 138 ++++++++
>> 4 files changed, 458 insertions(+)
>> create mode 100644 arch/mips/boot/dts/mobileye/Makefile
>> create mode 100644 arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi
>> create mode 100644 arch/mips/boot/dts/mobileye/eyeq5.dtsi
>>
>> diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
>> index 928f38a79dff..edb8e8dee758 100644
>> --- a/arch/mips/boot/dts/Makefile
>> +++ b/arch/mips/boot/dts/Makefile
>> @@ -8,6 +8,7 @@ subdir-$(CONFIG_LANTIQ) += lantiq
>> subdir-$(CONFIG_MACH_LOONGSON64) += loongson
>> subdir-$(CONFIG_SOC_VCOREIII) += mscc
>> subdir-$(CONFIG_MIPS_MALTA) += mti
>> +subdir-$(CONFIG_SOC_EYEQ5) += mobileye
>> subdir-$(CONFIG_LEGACY_BOARD_SEAD3) += mti
>> subdir-$(CONFIG_FIT_IMAGE_FDT_NI169445) += ni
>> subdir-$(CONFIG_MACH_PIC32) += pic32
>> diff --git a/arch/mips/boot/dts/mobileye/Makefile b/arch/mips/boot/dts/mobileye/Makefile
>> new file mode 100644
>> index 000000000000..99c4124fd4c0
>> --- /dev/null
>> +++ b/arch/mips/boot/dts/mobileye/Makefile
>> @@ -0,0 +1,4 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +# Copyright 2023 Mobileye Vision Technologies Ltd.
>> +
>> +obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
>
> You didn't add anything to 'dtb-y'. Did you test this?
Initially yes, and finally we switch on the FIT image generation, so we
don't use it anymore
>
> Also, CONFIG_BUILTIN_DTB is supposed to be for legacy bootloaders
> which don't understand DT. For a new SoC, fix the bootloader.
I can remove it
>
>> diff --git a/arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi b/arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi
>> new file mode 100644
>> index 000000000000..a0066465ac8b
>> --- /dev/null
>> +++ b/arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi
>> @@ -0,0 +1,315 @@
>> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +/*
>> + * Copyright 2023 Mobileye Vision Technologies Ltd.
>> + */
>
> I assume these aren't all really fixed, but just 'I don't have a clock
> driver yet'. That creates an ABI issue when you add the clock
> driver(s). Just FYI.
Indeed they aren't all fixed. The plan is to replace the relevant ones by a
real clock driver when ready.
In this case some part of the dts file will be modified. But is it a
real issue ?
Booting with a new kernel with an old dtb will still continue to work in
the same way. it's only new tdb with old kernel that won't work, but we
are not supposed to support this case.
>
>> +
>> +/ {
>> + /* Fixed clock */
>> + pll_cpu: pll_cpu {
>
> Don't use _ in node names.
OK
[...]
>> +/* PLL_CPU derivatives */
>> + occ_cpu: occ_cpu {
>> + compatible = "fixed-factor-clock";
>> + clocks = <&pll_cpu>;
>> + #clock-cells = <0>;
>> + clock-div = <1>;
>> + clock-mult = <1>;
>> + clock-output-names = "occ_cpu";
>
> Isn't the default name the node name? Drop these unless you really
> have a need and they aren't redundant.
indeed it's not used, I remove them too.
[...]
>> --- /dev/null
>> +++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
>> @@ -0,0 +1,138 @@
>> +// SPDX-License-Identifier: GPL-2.0
>
> Doesn't match eyeq5-fixed-clocks.dtsi
OK
>
>> +/*
>> + * Copyright 2023 Mobileye Vision Technologies Ltd.
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/mips-gic.h>
>> +#include <dt-bindings/soc/mobileye,eyeq5.h>
>> +
>> +/memreserve/ 0x40000000 0xc0000000; /* DDR32 */
>> +/memreserve/ 0x08000000 0x08000000; /* DDR_LOW */
>> +
>> +#include "eyeq5-fixed-clocks.dtsi"
>> +
>> +/* almost all GIC IRQs has the same characteristics. provide short form */
>
> Maybe so, but I prefer not having 2 levels of lookup to figure out values.
>
>> +#define GIC_IRQ(x) GIC_SHARED (x) IRQ_TYPE_LEVEL_HIGH
OK I remove it.
>> +
>> +/ {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + cpu@0 {
>> + device_type = "cpu";
>> + compatible = "mti,i6500";
>> + reg = <0>;
>> + clocks = <&core0_clk>;
>> + };
>> + };
>> +
>> + reserved-memory {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> +/* These reserved memory regions are also defined in bootmanager
>> + * for configuring inbound translation for BARS, don't change
>> + * these without syncing with bootmanager
>> + */
>
> Indent with the rest of the node.
OK
Thanks,
Gregory
@@ -8,6 +8,7 @@ subdir-$(CONFIG_LANTIQ) += lantiq
subdir-$(CONFIG_MACH_LOONGSON64) += loongson
subdir-$(CONFIG_SOC_VCOREIII) += mscc
subdir-$(CONFIG_MIPS_MALTA) += mti
+subdir-$(CONFIG_SOC_EYEQ5) += mobileye
subdir-$(CONFIG_LEGACY_BOARD_SEAD3) += mti
subdir-$(CONFIG_FIT_IMAGE_FDT_NI169445) += ni
subdir-$(CONFIG_MACH_PIC32) += pic32
new file mode 100644
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright 2023 Mobileye Vision Technologies Ltd.
+
+obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
new file mode 100644
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright 2023 Mobileye Vision Technologies Ltd.
+ */
+
+/ {
+ /* Fixed clock */
+ pll_cpu: pll_cpu {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1500000000>;
+ };
+
+ pll_vdi: pll_vdi {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1280000000>;
+ };
+
+ pll_per: pll_per {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <2000000000>;
+ };
+
+ pll_ddr0: pll_ddr0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1857210000>;
+ };
+
+ pll_ddr1: pll_ddr1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1857210000>;
+ };
+
+/* PLL_CPU derivatives */
+ occ_cpu: occ_cpu {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_cpu>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "occ_cpu";
+ };
+ si_css0_ref_clk: si_css0_ref_clk { /* gate ClkRstGen_si_css0_ref */
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_cpu>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "si_css0_ref_clk";
+ };
+ cpc_clk: cpc_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&si_css0_ref_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "cpc_clk";
+ };
+ core0_clk: core0_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&si_css0_ref_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "core0_clk";
+ };
+ core1_clk: core1_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&si_css0_ref_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "core1_clk";
+ };
+ core2_clk: core2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&si_css0_ref_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "core2_clk";
+ };
+ core3_clk: core3_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&si_css0_ref_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "core3_clk";
+ };
+ cm_clk: cm_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&si_css0_ref_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "cm_clk";
+ };
+ mem_clk: mem_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&si_css0_ref_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "mem_clk";
+ };
+ occ_isram: occ_isram {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_cpu>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "occ_isram";
+ };
+ isram_clk: isram_clk { /* gate ClkRstGen_isram */
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_isram>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "isram_clk";
+ };
+ occ_dbu: occ_dbu {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_cpu>;
+ #clock-cells = <0>;
+ clock-div = <10>;
+ clock-mult = <1>;
+ clock-output-names = "occ_dbu";
+ };
+ si_dbu_tp_pclk: si_dbu_tp_pclk { /* gate ClkRstGen_dbu */
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_dbu>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "si_dbu_tp_pclk";
+ };
+/* PLL_VDI derivatives */
+ occ_vdi: occ_vdi {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_vdi>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "occ_vdi";
+ };
+ vdi_clk: vdi_clk { /* gate ClkRstGen_vdi */
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_vdi>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "vdi_clk";
+ };
+ occ_can_ser: occ_can_ser {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_vdi>;
+ #clock-cells = <0>;
+ clock-div = <16>;
+ clock-mult = <1>;
+ clock-output-names = "occ_can_ser";
+ };
+ can_ser_clk: can_ser_clk { /* gate ClkRstGen_can_ser */
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_can_ser>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "can_ser_clk";
+ };
+ i2c_ser_clk: i2c_ser_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_vdi>;
+ #clock-cells = <0>;
+ clock-div = <20>;
+ clock-mult = <1>;
+ clock-output-names = "i2c_ser_clk";
+ };
+/* PLL_PER derivatives */
+ occ_periph: occ_periph {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_per>;
+ #clock-cells = <0>;
+ clock-div = <16>;
+ clock-mult = <1>;
+ clock-output-names = "occ_periph";
+ };
+ periph_clk: periph_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_periph>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "periph_clk";
+ };
+ can_clk: can_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_periph>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "can_clk";
+ };
+ spi_clk: spi_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_periph>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "spi_clk";
+ };
+ uart_clk: uart_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_periph>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "uart_clk";
+ };
+ i2c_clk: i2c_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_periph>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "i2c_clk";
+ };
+ timer_clk: timer_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_periph>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "timer_clk";
+ };
+ gpio_clk: gpio_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_periph>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "gpio_clk";
+ };
+ emmc_sys_clk: emmc_sys_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_per>;
+ #clock-cells = <0>;
+ clock-div = <10>;
+ clock-mult = <1>;
+ clock-output-names = "emmc_sys_clk";
+ };
+ ccf_ctrl_clk: ccf_ctrl_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_per>;
+ #clock-cells = <0>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ clock-output-names = "ccf_ctrl_clk";
+ };
+ occ_mjpeg_core: occ_mjpeg_core {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_per>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "occ_mjpeg_core";
+ };
+ hsm_clk: hsm_clk { /* gate ClkRstGen_hsm */
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_mjpeg_core>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "hsm_clk";
+ };
+ mjpeg_core_clk: mjpeg_core_clk { /* gate ClkRstGen_mjpeg_gen */
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_mjpeg_core>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "mjpeg_core_clk";
+ };
+ fcmu_a_clk: fcmu_a_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_per>;
+ #clock-cells = <0>;
+ clock-div = <20>;
+ clock-mult = <1>;
+ clock-output-names = "fcmu_a_clk";
+ };
+ occ_pci_sys: occ_pci_sys {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_per>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ clock-output-names = "occ_pci_sys";
+ };
+ pclk: pclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>; /* 250MHz */
+ };
+ tsu_clk: tsu_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>; /* 125MHz */
+ };
+};
new file mode 100644
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2023 Mobileye Vision Technologies Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+#include <dt-bindings/soc/mobileye,eyeq5.h>
+
+/memreserve/ 0x40000000 0xc0000000; /* DDR32 */
+/memreserve/ 0x08000000 0x08000000; /* DDR_LOW */
+
+#include "eyeq5-fixed-clocks.dtsi"
+
+/* almost all GIC IRQs has the same characteristics. provide short form */
+#define GIC_IRQ(x) GIC_SHARED (x) IRQ_TYPE_LEVEL_HIGH
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mti,i6500";
+ reg = <0>;
+ clocks = <&core0_clk>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+/* These reserved memory regions are also defined in bootmanager
+ * for configuring inbound translation for BARS, don't change
+ * these without syncing with bootmanager
+ */
+ shmem0_reserved: shmem@804000000 {
+ reg = <0x8 0x04000000 0x0 0x1000000>;
+ };
+ shmem1_reserved: shmem@805000000 {
+ reg = <0x8 0x05000000 0x0 0x1000000>;
+ };
+ pci0_msi_reserved: pci0_msi@806000000 {
+ reg = <0x8 0x06000000 0x0 0x100000>;
+ };
+ pci1_msi_reserved: pci1_msi@806100000 {
+ reg = <0x8 0x06100000 0x0 0x100000>;
+ };
+
+ mini_coredump0_reserved: mini_coredump0@806200000 {
+ reg = <0x8 0x06200000 0x0 0x100000>;
+ };
+ mhm_reserved_0: the_mhm_reserved_0@0 {
+ reg = <0x8 0x00000000 0x0 0x0000800>;
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+ cpu_intc: interrupt-controller {
+ compatible = "mti,cpu-interrupt-controller";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+ gic: interrupt-controller@140000 {
+ compatible = "mti,gic";
+ reg = <0x0 0x140000 0x0 0x20000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ /*
+ * Declare the interrupt-parent even though the mti,gic
+ * binding doesn't require it, such that the kernel can
+ * figure out that cpu_intc is the root interrupt
+ * controller & should be probed first.
+ */
+ interrupt-parent = <&cpu_intc>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ clocks = <&core0_clk>;
+ };
+ };
+
+ soc: soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ compatible = "simple-bus";
+
+ uart0: serial@800000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0 0x800000 0x0 0x1000>;
+ reg-io-width = <4>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_IRQ(NUM_INT_UART)>;
+ clocks = <&uart_clk>, <&occ_periph>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ uart1: serial@900000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0 0x900000 0x0 0x1000>;
+ reg-io-width = <4>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_IRQ(NUM_INT_UART)>;
+ clocks = <&uart_clk>, <&occ_periph>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ uart2: serial@a00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0 0xa00000 0x0 0x1000>;
+ reg-io-width = <4>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_IRQ(NUM_INT_UART)>;
+ clocks = <&uart_clk>, <&occ_periph>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ olb: olb@e00000 {
+ compatible = "mobileye,eyeq5-olb", "syscon", "simple-mfd";
+ reg = <0 0xe00000 0x0 0x400>;
+ reg-io-width = <4>;
+ };
+
+ };
+};