[v6,07/14] can: m_can: Add tx coalescing ethtool support
Commit Message
Add TX support to get/set functions for ethtool coalescing.
tx-frames-irq and tx-usecs-irq can only be set/unset together.
tx-frames-irq needs to be less than TXE and TXB.
As rx and tx share the same timer, rx-usecs-irq and tx-usecs-irq can be
enabled/disabled individually but they need to have the same value if
enabled.
Polling is excluded from TX irq coalescing.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
drivers/net/can/m_can/m_can.c | 38 ++++++++++++++++++++++++++++++++++-
1 file changed, 37 insertions(+), 1 deletion(-)
Comments
On Fri, Sep 29, 2023 at 04:12:57PM +0200, Markus Schneider-Pargmann wrote:
> Add TX support to get/set functions for ethtool coalescing.
> tx-frames-irq and tx-usecs-irq can only be set/unset together.
> tx-frames-irq needs to be less than TXE and TXB.
>
> As rx and tx share the same timer, rx-usecs-irq and tx-usecs-irq can be
> enabled/disabled individually but they need to have the same value if
> enabled.
>
> Polling is excluded from TX irq coalescing.
>
> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <horms@kernel.org>
@@ -1985,6 +1985,8 @@ static int m_can_get_coalesce(struct net_device *dev,
ec->rx_max_coalesced_frames_irq = cdev->rx_max_coalesced_frames_irq;
ec->rx_coalesce_usecs_irq = cdev->rx_coalesce_usecs_irq;
+ ec->tx_max_coalesced_frames_irq = cdev->tx_max_coalesced_frames_irq;
+ ec->tx_coalesce_usecs_irq = cdev->tx_coalesce_usecs_irq;
return 0;
}
@@ -2011,16 +2013,50 @@ static int m_can_set_coalesce(struct net_device *dev,
netdev_err(dev, "rx-frames-irq and rx-usecs-irq can only be set together\n");
return -EINVAL;
}
+ if (ec->tx_max_coalesced_frames_irq > cdev->mcfg[MRAM_TXE].num) {
+ netdev_err(dev, "tx-frames-irq %u greater than the TX event FIFO %u\n",
+ ec->tx_max_coalesced_frames_irq,
+ cdev->mcfg[MRAM_TXE].num);
+ return -EINVAL;
+ }
+ if (ec->tx_max_coalesced_frames_irq > cdev->mcfg[MRAM_TXB].num) {
+ netdev_err(dev, "tx-frames-irq %u greater than the TX FIFO %u\n",
+ ec->tx_max_coalesced_frames_irq,
+ cdev->mcfg[MRAM_TXB].num);
+ return -EINVAL;
+ }
+ if ((ec->tx_max_coalesced_frames_irq == 0) != (ec->tx_coalesce_usecs_irq == 0)) {
+ netdev_err(dev, "tx-frames-irq and tx-usecs-irq can only be set together\n");
+ return -EINVAL;
+ }
+ if (ec->rx_coalesce_usecs_irq != 0 && ec->tx_coalesce_usecs_irq != 0 &&
+ ec->rx_coalesce_usecs_irq != ec->tx_coalesce_usecs_irq) {
+ netdev_err(dev, "rx-usecs-irq %u needs to be equal to tx-usecs-irq %u if both are enabled\n",
+ ec->rx_coalesce_usecs_irq,
+ ec->tx_coalesce_usecs_irq);
+ return -EINVAL;
+ }
cdev->rx_max_coalesced_frames_irq = ec->rx_max_coalesced_frames_irq;
cdev->rx_coalesce_usecs_irq = ec->rx_coalesce_usecs_irq;
+ cdev->tx_max_coalesced_frames_irq = ec->tx_max_coalesced_frames_irq;
+ cdev->tx_coalesce_usecs_irq = ec->tx_coalesce_usecs_irq;
+
+ if (cdev->rx_coalesce_usecs_irq)
+ cdev->irq_timer_wait =
+ ns_to_ktime(cdev->rx_coalesce_usecs_irq * NSEC_PER_USEC);
+ else
+ cdev->irq_timer_wait =
+ ns_to_ktime(cdev->tx_coalesce_usecs_irq * NSEC_PER_USEC);
return 0;
}
static const struct ethtool_ops m_can_ethtool_ops = {
.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS_IRQ |
- ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ,
+ ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ |
+ ETHTOOL_COALESCE_TX_USECS_IRQ |
+ ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ,
.get_ts_info = ethtool_op_get_ts_info,
.get_coalesce = m_can_get_coalesce,
.set_coalesce = m_can_set_coalesce,