diff mbox series

[RFC,2/2] hid: lenovo: move type checks to lenovo_features_set_cptkbd()

Message ID 20230925102302.13094-2-martink@posteo.de
State New
Headers
Series [RFC,1/2] hid: lenovo: Resend all settings on reset_resume for compact keyboards |

Commit Message

Martin Kepplinger Sept. 25, 2023, 10:23 a.m. UTC 
  These custom commands will be sent to both the USB keyboard & mouse
devices but only the mouse will respond. Avoid sending known-useless
messages by always prepending the filter before sending them.

Suggested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Martin Kepplinger <martink@posteo.de>
---
 drivers/hid/hid-lenovo.c | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)

Comments

Jamie Lentin Sept. 27, 2023, 8:19 a.m. UTC | #1 
On 2023-09-25 11:23, Martin Kepplinger wrote:
> These custom commands will be sent to both the USB keyboard & mouse
> devices but only the mouse will respond. Avoid sending known-useless
> messages by always prepending the filter before sending them.
> 
> Suggested-by: Jamie Lentin <jm@lentin.co.uk>
> Signed-off-by: Martin Kepplinger <martink@posteo.de>
> ---
>  drivers/hid/hid-lenovo.c | 27 +++++++++------------------
>  1 file changed, 9 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c
> index 29aa6d372bad..922f3e5462f4 100644
> --- a/drivers/hid/hid-lenovo.c
> +++ b/drivers/hid/hid-lenovo.c
> @@ -521,6 +521,14 @@ static void lenovo_features_set_cptkbd(struct
> hid_device *hdev)
>  	int ret;
>  	struct lenovo_drvdata *cptkbd_data = hid_get_drvdata(hdev);
> 
> +	/* All the custom action happens on the USBMOUSE device for USB */
> +	if (((hdev->product == USB_DEVICE_ID_LENOVO_CUSBKBD) ||
> +	    (hdev->product == USB_DEVICE_ID_LENOVO_TPIIUSBKBD)) &&
> +	    hdev->type != HID_TYPE_USBMOUSE) {
> +		hid_dbg(hdev, "Ignoring keyboard half of device\n");
> +		return;
> +	}
> +
>  	/*
>  	 * Tell the keyboard a driver understands it, and turn F7, F9, F11 
> into
>  	 * regular keys
> @@ -1122,14 +1130,6 @@ static int lenovo_probe_cptkbd(struct hid_device 
> *hdev)
>  	int ret;
>  	struct lenovo_drvdata *cptkbd_data;
> 
> -	/* All the custom action happens on the USBMOUSE device for USB */
> -	if (((hdev->product == USB_DEVICE_ID_LENOVO_CUSBKBD) ||
> -	    (hdev->product == USB_DEVICE_ID_LENOVO_TPIIUSBKBD)) &&
> -	    hdev->type != HID_TYPE_USBMOUSE) {
> -		hid_dbg(hdev, "Ignoring keyboard half of device\n");
> -		return 0;
> -	}
> -

I like the idea of doing it once then forgetting about it, but removing 
this will mean that the "keyboard half" will have it's own set of 
non-functional sysfs parameters I think? Currently:-

# evtest
   . . .
/dev/input/event10:     ThinkPad Compact Bluetooth Keyboard with 
TrackPoint
/dev/input/event11:     Lenovo ThinkPad Compact USB Keyboard with 
TrackPoint
/dev/input/event12:     Lenovo ThinkPad Compact USB Keyboard with 
TrackPoint

# ls -1 /sys/class/input/event*/device/device/fn_lock
/sys/class/input/event10/device/device/fn_lock
/sys/class/input/event12/device/device/fn_lock

(note 11 is missing.)

I think the easiest (but ugly) thing to do is to copy-paste this lump of 
code to the top of lenovo_reset_resume.

Cheers,

>  	cptkbd_data = devm_kzalloc(&hdev->dev,
>  					sizeof(*cptkbd_data),
>  					GFP_KERNEL);
> @@ -1264,16 +1264,7 @@ static int lenovo_probe(struct hid_device *hdev,
>  #ifdef CONFIG_PM
>  static int lenovo_reset_resume(struct hid_device *hdev)
>  {
> -	switch (hdev->product) {
> -	case USB_DEVICE_ID_LENOVO_CUSBKBD:
> -		if (hdev->type == HID_TYPE_USBMOUSE) {
> -			lenovo_features_set_cptkbd(hdev);
> -		}
> -
> -		break;
> -	default:
> -		break;
> -	}
> +	lenovo_features_set_cptkbd(hdev);
> 
>  	return 0;
>  }
Martin Kepplinger Sept. 27, 2023, 11:20 a.m. UTC | #2 
Am Mittwoch, dem 27.09.2023 um 09:19 +0100 schrieb Jamie Lentin:
> On 2023-09-25 11:23, Martin Kepplinger wrote:
> > These custom commands will be sent to both the USB keyboard & mouse
> > devices but only the mouse will respond. Avoid sending known-
> > useless
> > messages by always prepending the filter before sending them.
> > 
> > Suggested-by: Jamie Lentin <jm@lentin.co.uk>
> > Signed-off-by: Martin Kepplinger <martink@posteo.de>
> > ---
> >  drivers/hid/hid-lenovo.c | 27 +++++++++------------------
> >  1 file changed, 9 insertions(+), 18 deletions(-)
> > 
> > diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c
> > index 29aa6d372bad..922f3e5462f4 100644
> > --- a/drivers/hid/hid-lenovo.c
> > +++ b/drivers/hid/hid-lenovo.c
> > @@ -521,6 +521,14 @@ static void lenovo_features_set_cptkbd(struct
> > hid_device *hdev)
> >         int ret;
> >         struct lenovo_drvdata *cptkbd_data = hid_get_drvdata(hdev);
> > 
> > +       /* All the custom action happens on the USBMOUSE device for
> > USB */
> > +       if (((hdev->product == USB_DEVICE_ID_LENOVO_CUSBKBD) ||
> > +           (hdev->product == USB_DEVICE_ID_LENOVO_TPIIUSBKBD)) &&
> > +           hdev->type != HID_TYPE_USBMOUSE) {
> > +               hid_dbg(hdev, "Ignoring keyboard half of
> > device\n");
> > +               return;
> > +       }
> > +
> >         /*
> >          * Tell the keyboard a driver understands it, and turn F7,
> > F9, F11 
> > into
> >          * regular keys
> > @@ -1122,14 +1130,6 @@ static int lenovo_probe_cptkbd(struct
> > hid_device 
> > *hdev)
> >         int ret;
> >         struct lenovo_drvdata *cptkbd_data;
> > 
> > -       /* All the custom action happens on the USBMOUSE device for
> > USB */
> > -       if (((hdev->product == USB_DEVICE_ID_LENOVO_CUSBKBD) ||
> > -           (hdev->product == USB_DEVICE_ID_LENOVO_TPIIUSBKBD)) &&
> > -           hdev->type != HID_TYPE_USBMOUSE) {
> > -               hid_dbg(hdev, "Ignoring keyboard half of
> > device\n");
> > -               return 0;
> > -       }
> > -
> 
> I like the idea of doing it once then forgetting about it, but
> removing 
> this will mean that the "keyboard half" will have it's own set of 
> non-functional sysfs parameters I think? Currently:-
> 
> # evtest
>    . . .
> /dev/input/event10:     ThinkPad Compact Bluetooth Keyboard with 
> TrackPoint
> /dev/input/event11:     Lenovo ThinkPad Compact USB Keyboard with 
> TrackPoint
> /dev/input/event12:     Lenovo ThinkPad Compact USB Keyboard with 
> TrackPoint
> 
> # ls -1 /sys/class/input/event*/device/device/fn_lock
> /sys/class/input/event10/device/device/fn_lock
> /sys/class/input/event12/device/device/fn_lock
> 
> (note 11 is missing.)
> 
> I think the easiest (but ugly) thing to do is to copy-paste this lump
> of 
> code to the top of lenovo_reset_resume.
> Cheers,
> 
> >         cptkbd_data = devm_kzalloc(&hdev->dev,
> >                                         sizeof(*cptkbd_data),
> >                                         GFP_KERNEL);
> > @@ -1264,16 +1264,7 @@ static int lenovo_probe(struct hid_device
> > *hdev,
> >  #ifdef CONFIG_PM
> >  static int lenovo_reset_resume(struct hid_device *hdev)
> >  {
> > -       switch (hdev->product) {
> > -       case USB_DEVICE_ID_LENOVO_CUSBKBD:
> > -               if (hdev->type == HID_TYPE_USBMOUSE) {
> > -                       lenovo_features_set_cptkbd(hdev);
> > -               }
> > -
> > -               break;
> > -       default:
> > -               break;
> > -       }
> > +       lenovo_features_set_cptkbd(hdev);

ok. ignore my change (this whole patch) and look at your addition here,
don't you already make sure only the mouse-part gets the messages? you
just write switch()case instead of if(); what do you think is missing
here?

thanks,
                           martin

> > 
> >         return 0;
> >  }
Jamie Lentin Sept. 28, 2023, 9:06 p.m. UTC | #3 
On 2023-09-27 12:20, Martin Kepplinger wrote:
> Am Mittwoch, dem 27.09.2023 um 09:19 +0100 schrieb Jamie Lentin:
>> On 2023-09-25 11:23, Martin Kepplinger wrote:
>> > These custom commands will be sent to both the USB keyboard & mouse
>> > devices but only the mouse will respond. Avoid sending known-
>> > useless
>> > messages by always prepending the filter before sending them.
>> >
>> > Suggested-by: Jamie Lentin <jm@lentin.co.uk>
>> > Signed-off-by: Martin Kepplinger <martink@posteo.de>
>> > ---
>> >  drivers/hid/hid-lenovo.c | 27 +++++++++------------------
>> >  1 file changed, 9 insertions(+), 18 deletions(-)
>> >
>> > diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c
>> > index 29aa6d372bad..922f3e5462f4 100644
>> > --- a/drivers/hid/hid-lenovo.c
>> > +++ b/drivers/hid/hid-lenovo.c
>> > @@ -521,6 +521,14 @@ static void lenovo_features_set_cptkbd(struct
>> > hid_device *hdev)
>> >         int ret;
>> >         struct lenovo_drvdata *cptkbd_data = hid_get_drvdata(hdev);
>> >
>> > +       /* All the custom action happens on the USBMOUSE device for
>> > USB */
>> > +       if (((hdev->product == USB_DEVICE_ID_LENOVO_CUSBKBD) ||
>> > +           (hdev->product == USB_DEVICE_ID_LENOVO_TPIIUSBKBD)) &&
>> > +           hdev->type != HID_TYPE_USBMOUSE) {
>> > +               hid_dbg(hdev, "Ignoring keyboard half of
>> > device\n");
>> > +               return;
>> > +       }
>> > +
>> >         /*
>> >          * Tell the keyboard a driver understands it, and turn F7,
>> > F9, F11
>> > into
>> >          * regular keys
>> > @@ -1122,14 +1130,6 @@ static int lenovo_probe_cptkbd(struct
>> > hid_device
>> > *hdev)
>> >         int ret;
>> >         struct lenovo_drvdata *cptkbd_data;
>> >
>> > -       /* All the custom action happens on the USBMOUSE device for
>> > USB */
>> > -       if (((hdev->product == USB_DEVICE_ID_LENOVO_CUSBKBD) ||
>> > -           (hdev->product == USB_DEVICE_ID_LENOVO_TPIIUSBKBD)) &&
>> > -           hdev->type != HID_TYPE_USBMOUSE) {
>> > -               hid_dbg(hdev, "Ignoring keyboard half of
>> > device\n");
>> > -               return 0;
>> > -       }
>> > -
>> 
>> I like the idea of doing it once then forgetting about it, but
>> removing
>> this will mean that the "keyboard half" will have it's own set of
>> non-functional sysfs parameters I think? Currently:-
>> 
>> # evtest
>>    . . .
>> /dev/input/event10:     ThinkPad Compact Bluetooth Keyboard with
>> TrackPoint
>> /dev/input/event11:     Lenovo ThinkPad Compact USB Keyboard with
>> TrackPoint
>> /dev/input/event12:     Lenovo ThinkPad Compact USB Keyboard with
>> TrackPoint
>> 
>> # ls -1 /sys/class/input/event*/device/device/fn_lock
>> /sys/class/input/event10/device/device/fn_lock
>> /sys/class/input/event12/device/device/fn_lock
>> 
>> (note 11 is missing.)
>> 
>> I think the easiest (but ugly) thing to do is to copy-paste this lump
>> of
>> code to the top of lenovo_reset_resume.
>> Cheers,
>> 
>> >         cptkbd_data = devm_kzalloc(&hdev->dev,
>> >                                         sizeof(*cptkbd_data),
>> >                                         GFP_KERNEL);
>> > @@ -1264,16 +1264,7 @@ static int lenovo_probe(struct hid_device
>> > *hdev,
>> >  #ifdef CONFIG_PM
>> >  static int lenovo_reset_resume(struct hid_device *hdev)
>> >  {
>> > -       switch (hdev->product) {
>> > -       case USB_DEVICE_ID_LENOVO_CUSBKBD:
>> > -               if (hdev->type == HID_TYPE_USBMOUSE) {
>> > -                       lenovo_features_set_cptkbd(hdev);
>> > -               }
>> > -
>> > -               break;
>> > -       default:
>> > -               break;
>> > -       }
>> > +       lenovo_features_set_cptkbd(hdev);
> 
> ok. ignore my change (this whole patch) and look at your addition here,
> don't you already make sure only the mouse-part gets the messages? you
> just write switch()case instead of if(); what do you think is missing
> here?

Correct, this switch statement() that you're removing in this patch 
already does exactly this, so replacing it with the 
if()-and-return-early block would result in equivalent code (ignoring 
the Trackpoint keyboard II). That suggestion wasn't the most helpful of 
mine, sorry!

The reason I originally used a switch here is for symmetry with 
lenovo_probe(), lenovo_remove(), etc. It might some day be useful to add 
something like:

	case USB_DEVICE_ID_LENOVO_X1_TAB:
		lenovo_reset_resume_tp10ubkbd(hdev);
		break;

...to the switch. For completeness, lenovo_reset_resume() should 
probably call a separate lenovo_reset_resume_cptkbd() that does the 
work. For just 3 lines of code it didn't seem worth it at the time 
though.

Cheers,

> 
> thanks,
>                            martin
> 
>> >
>> >         return 0;
>> >  }
Martin Kepplinger Sept. 30, 2023, 9:26 a.m. UTC | #4 
Am Donnerstag, dem 28.09.2023 um 22:06 +0100 schrieb Jamie Lentin:
> On 2023-09-27 12:20, Martin Kepplinger wrote:
> > Am Mittwoch, dem 27.09.2023 um 09:19 +0100 schrieb Jamie Lentin:
> > > On 2023-09-25 11:23, Martin Kepplinger wrote:
> > > > These custom commands will be sent to both the USB keyboard &
> > > > mouse
> > > > devices but only the mouse will respond. Avoid sending known-
> > > > useless
> > > > messages by always prepending the filter before sending them.
> > > > 
> > > > Suggested-by: Jamie Lentin <jm@lentin.co.uk>
> > > > Signed-off-by: Martin Kepplinger <martink@posteo.de>
> > > > ---
> > > >  drivers/hid/hid-lenovo.c | 27 +++++++++------------------
> > > >  1 file changed, 9 insertions(+), 18 deletions(-)
> > > > 
> > > > diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-
> > > > lenovo.c
> > > > index 29aa6d372bad..922f3e5462f4 100644
> > > > --- a/drivers/hid/hid-lenovo.c
> > > > +++ b/drivers/hid/hid-lenovo.c
> > > > @@ -521,6 +521,14 @@ static void
> > > > lenovo_features_set_cptkbd(struct
> > > > hid_device *hdev)
> > > >         int ret;
> > > >         struct lenovo_drvdata *cptkbd_data =
> > > > hid_get_drvdata(hdev);
> > > > 
> > > > +       /* All the custom action happens on the USBMOUSE device
> > > > for
> > > > USB */
> > > > +       if (((hdev->product == USB_DEVICE_ID_LENOVO_CUSBKBD) ||
> > > > +           (hdev->product == USB_DEVICE_ID_LENOVO_TPIIUSBKBD))
> > > > &&
> > > > +           hdev->type != HID_TYPE_USBMOUSE) {
> > > > +               hid_dbg(hdev, "Ignoring keyboard half of
> > > > device\n");
> > > > +               return;
> > > > +       }
> > > > +
> > > >         /*
> > > >          * Tell the keyboard a driver understands it, and turn
> > > > F7,
> > > > F9, F11
> > > > into
> > > >          * regular keys
> > > > @@ -1122,14 +1130,6 @@ static int lenovo_probe_cptkbd(struct
> > > > hid_device
> > > > *hdev)
> > > >         int ret;
> > > >         struct lenovo_drvdata *cptkbd_data;
> > > > 
> > > > -       /* All the custom action happens on the USBMOUSE device
> > > > for
> > > > USB */
> > > > -       if (((hdev->product == USB_DEVICE_ID_LENOVO_CUSBKBD) ||
> > > > -           (hdev->product == USB_DEVICE_ID_LENOVO_TPIIUSBKBD))
> > > > &&
> > > > -           hdev->type != HID_TYPE_USBMOUSE) {
> > > > -               hid_dbg(hdev, "Ignoring keyboard half of
> > > > device\n");
> > > > -               return 0;
> > > > -       }
> > > > -
> > > 
> > > I like the idea of doing it once then forgetting about it, but
> > > removing
> > > this will mean that the "keyboard half" will have it's own set of
> > > non-functional sysfs parameters I think? Currently:-
> > > 
> > > # evtest
> > >    . . .
> > > /dev/input/event10:     ThinkPad Compact Bluetooth Keyboard with
> > > TrackPoint
> > > /dev/input/event11:     Lenovo ThinkPad Compact USB Keyboard with
> > > TrackPoint
> > > /dev/input/event12:     Lenovo ThinkPad Compact USB Keyboard with
> > > TrackPoint
> > > 
> > > # ls -1 /sys/class/input/event*/device/device/fn_lock
> > > /sys/class/input/event10/device/device/fn_lock
> > > /sys/class/input/event12/device/device/fn_lock
> > > 
> > > (note 11 is missing.)
> > > 
> > > I think the easiest (but ugly) thing to do is to copy-paste this
> > > lump
> > > of
> > > code to the top of lenovo_reset_resume.
> > > Cheers,
> > > 
> > > >         cptkbd_data = devm_kzalloc(&hdev->dev,
> > > >                                         sizeof(*cptkbd_data),
> > > >                                         GFP_KERNEL);
> > > > @@ -1264,16 +1264,7 @@ static int lenovo_probe(struct
> > > > hid_device
> > > > *hdev,
> > > >  #ifdef CONFIG_PM
> > > >  static int lenovo_reset_resume(struct hid_device *hdev)
> > > >  {
> > > > -       switch (hdev->product) {
> > > > -       case USB_DEVICE_ID_LENOVO_CUSBKBD:
> > > > -               if (hdev->type == HID_TYPE_USBMOUSE) {
> > > > -                       lenovo_features_set_cptkbd(hdev);
> > > > -               }
> > > > -
> > > > -               break;
> > > > -       default:
> > > > -               break;
> > > > -       }
> > > > +       lenovo_features_set_cptkbd(hdev);
> > 
> > ok. ignore my change (this whole patch) and look at your addition
> > here,
> > don't you already make sure only the mouse-part gets the messages?
> > you
> > just write switch()case instead of if(); what do you think is
> > missing
> > here?
> 
> Correct, this switch statement() that you're removing in this patch 
> already does exactly this, so replacing it with the 
> if()-and-return-early block would result in equivalent code (ignoring
> the Trackpoint keyboard II). That suggestion wasn't the most helpful
> of 
> mine, sorry!
> 
> The reason I originally used a switch here is for symmetry with 
> lenovo_probe(), lenovo_remove(), etc. It might some day be useful to
> add 
> something like:
> 
>         case USB_DEVICE_ID_LENOVO_X1_TAB:
>                 lenovo_reset_resume_tp10ubkbd(hdev);
>                 break;
> 
> ...to the switch. For completeness, lenovo_reset_resume() should 
> probably call a separate lenovo_reset_resume_cptkbd() that does the 
> work. For just 3 lines of code it didn't seem worth it at the time 
> though.
> 
> Cheers,

ok your original patch seems to basically be a valid first fix. Should
I send it on your behalf (with you as author) or do you want to send it
yourself? Let's get this fixed :)

thanks,
                       martin
Jamie Lentin Sept. 30, 2023, 9:58 a.m. UTC | #5 
On 2023-09-30 10:26, Martin Kepplinger wrote:
> Am Donnerstag, dem 28.09.2023 um 22:06 +0100 schrieb Jamie Lentin:
>> On 2023-09-27 12:20, Martin Kepplinger wrote:
>> > Am Mittwoch, dem 27.09.2023 um 09:19 +0100 schrieb Jamie Lentin:
>> > > On 2023-09-25 11:23, Martin Kepplinger wrote:
>> > > > These custom commands will be sent to both the USB keyboard &
>> > > > mouse
>> > > > devices but only the mouse will respond. Avoid sending known-
>> > > > useless
>> > > > messages by always prepending the filter before sending them.
>> > > >
>> > > > Suggested-by: Jamie Lentin <jm@lentin.co.uk>
>> > > > Signed-off-by: Martin Kepplinger <martink@posteo.de>
>> > > > ---
>> > > >  drivers/hid/hid-lenovo.c | 27 +++++++++------------------
>> > > >  1 file changed, 9 insertions(+), 18 deletions(-)
>> > > >
>> > > > diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-
>> > > > lenovo.c
>> > > > index 29aa6d372bad..922f3e5462f4 100644
>> > > > --- a/drivers/hid/hid-lenovo.c
>> > > > +++ b/drivers/hid/hid-lenovo.c
>> > > > @@ -521,6 +521,14 @@ static void
>> > > > lenovo_features_set_cptkbd(struct
>> > > > hid_device *hdev)
>> > > >         int ret;
>> > > >         struct lenovo_drvdata *cptkbd_data =
>> > > > hid_get_drvdata(hdev);
>> > > >
>> > > > +       /* All the custom action happens on the USBMOUSE device
>> > > > for
>> > > > USB */
>> > > > +       if (((hdev->product == USB_DEVICE_ID_LENOVO_CUSBKBD) ||
>> > > > +           (hdev->product == USB_DEVICE_ID_LENOVO_TPIIUSBKBD))
>> > > > &&
>> > > > +           hdev->type != HID_TYPE_USBMOUSE) {
>> > > > +               hid_dbg(hdev, "Ignoring keyboard half of
>> > > > device\n");
>> > > > +               return;
>> > > > +       }
>> > > > +
>> > > >         /*
>> > > >          * Tell the keyboard a driver understands it, and turn
>> > > > F7,
>> > > > F9, F11
>> > > > into
>> > > >          * regular keys
>> > > > @@ -1122,14 +1130,6 @@ static int lenovo_probe_cptkbd(struct
>> > > > hid_device
>> > > > *hdev)
>> > > >         int ret;
>> > > >         struct lenovo_drvdata *cptkbd_data;
>> > > >
>> > > > -       /* All the custom action happens on the USBMOUSE device
>> > > > for
>> > > > USB */
>> > > > -       if (((hdev->product == USB_DEVICE_ID_LENOVO_CUSBKBD) ||
>> > > > -           (hdev->product == USB_DEVICE_ID_LENOVO_TPIIUSBKBD))
>> > > > &&
>> > > > -           hdev->type != HID_TYPE_USBMOUSE) {
>> > > > -               hid_dbg(hdev, "Ignoring keyboard half of
>> > > > device\n");
>> > > > -               return 0;
>> > > > -       }
>> > > > -
>> > >
>> > > I like the idea of doing it once then forgetting about it, but
>> > > removing
>> > > this will mean that the "keyboard half" will have it's own set of
>> > > non-functional sysfs parameters I think? Currently:-
>> > >
>> > > # evtest
>> > >    . . .
>> > > /dev/input/event10:     ThinkPad Compact Bluetooth Keyboard with
>> > > TrackPoint
>> > > /dev/input/event11:     Lenovo ThinkPad Compact USB Keyboard with
>> > > TrackPoint
>> > > /dev/input/event12:     Lenovo ThinkPad Compact USB Keyboard with
>> > > TrackPoint
>> > >
>> > > # ls -1 /sys/class/input/event*/device/device/fn_lock
>> > > /sys/class/input/event10/device/device/fn_lock
>> > > /sys/class/input/event12/device/device/fn_lock
>> > >
>> > > (note 11 is missing.)
>> > >
>> > > I think the easiest (but ugly) thing to do is to copy-paste this
>> > > lump
>> > > of
>> > > code to the top of lenovo_reset_resume.
>> > > Cheers,
>> > >
>> > > >         cptkbd_data = devm_kzalloc(&hdev->dev,
>> > > >                                         sizeof(*cptkbd_data),
>> > > >                                         GFP_KERNEL);
>> > > > @@ -1264,16 +1264,7 @@ static int lenovo_probe(struct
>> > > > hid_device
>> > > > *hdev,
>> > > >  #ifdef CONFIG_PM
>> > > >  static int lenovo_reset_resume(struct hid_device *hdev)
>> > > >  {
>> > > > -       switch (hdev->product) {
>> > > > -       case USB_DEVICE_ID_LENOVO_CUSBKBD:
>> > > > -               if (hdev->type == HID_TYPE_USBMOUSE) {
>> > > > -                       lenovo_features_set_cptkbd(hdev);
>> > > > -               }
>> > > > -
>> > > > -               break;
>> > > > -       default:
>> > > > -               break;
>> > > > -       }
>> > > > +       lenovo_features_set_cptkbd(hdev);
>> >
>> > ok. ignore my change (this whole patch) and look at your addition
>> > here,
>> > don't you already make sure only the mouse-part gets the messages?
>> > you
>> > just write switch()case instead of if(); what do you think is
>> > missing
>> > here?
>> 
>> Correct, this switch statement() that you're removing in this patch
>> already does exactly this, so replacing it with the
>> if()-and-return-early block would result in equivalent code (ignoring
>> the Trackpoint keyboard II). That suggestion wasn't the most helpful
>> of
>> mine, sorry!
>> 
>> The reason I originally used a switch here is for symmetry with
>> lenovo_probe(), lenovo_remove(), etc. It might some day be useful to
>> add
>> something like:
>> 
>>         case USB_DEVICE_ID_LENOVO_X1_TAB:
>>                 lenovo_reset_resume_tp10ubkbd(hdev);
>>                 break;
>> 
>> ...to the switch. For completeness, lenovo_reset_resume() should
>> probably call a separate lenovo_reset_resume_cptkbd() that does the
>> work. For just 3 lines of code it didn't seem worth it at the time
>> though.
>> 
>> Cheers,
> 
> ok your original patch seems to basically be a valid first fix. Should
> I send it on your behalf (with you as author) or do you want to send it
> yourself? Let's get this fixed :)

If it's working for you and you don't mind, feel free send it on my 
behalf. I don't have the hardware to test the patch currently.

Thanks!

> 
> thanks,
>                        martin
diff mbox series

Patch

diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c
index 29aa6d372bad..922f3e5462f4 100644
--- a/drivers/hid/hid-lenovo.c
+++ b/drivers/hid/hid-lenovo.c
@@ -521,6 +521,14 @@  static void lenovo_features_set_cptkbd(struct hid_device *hdev)
 	int ret;
 	struct lenovo_drvdata *cptkbd_data = hid_get_drvdata(hdev);
 
+	/* All the custom action happens on the USBMOUSE device for USB */
+	if (((hdev->product == USB_DEVICE_ID_LENOVO_CUSBKBD) ||
+	    (hdev->product == USB_DEVICE_ID_LENOVO_TPIIUSBKBD)) &&
+	    hdev->type != HID_TYPE_USBMOUSE) {
+		hid_dbg(hdev, "Ignoring keyboard half of device\n");
+		return;
+	}
+
 	/*
 	 * Tell the keyboard a driver understands it, and turn F7, F9, F11 into
 	 * regular keys
@@ -1122,14 +1130,6 @@  static int lenovo_probe_cptkbd(struct hid_device *hdev)
 	int ret;
 	struct lenovo_drvdata *cptkbd_data;
 
-	/* All the custom action happens on the USBMOUSE device for USB */
-	if (((hdev->product == USB_DEVICE_ID_LENOVO_CUSBKBD) ||
-	    (hdev->product == USB_DEVICE_ID_LENOVO_TPIIUSBKBD)) &&
-	    hdev->type != HID_TYPE_USBMOUSE) {
-		hid_dbg(hdev, "Ignoring keyboard half of device\n");
-		return 0;
-	}
-
 	cptkbd_data = devm_kzalloc(&hdev->dev,
 					sizeof(*cptkbd_data),
 					GFP_KERNEL);
@@ -1264,16 +1264,7 @@  static int lenovo_probe(struct hid_device *hdev,
 #ifdef CONFIG_PM
 static int lenovo_reset_resume(struct hid_device *hdev)
 {
-	switch (hdev->product) {
-	case USB_DEVICE_ID_LENOVO_CUSBKBD:
-		if (hdev->type == HID_TYPE_USBMOUSE) {
-			lenovo_features_set_cptkbd(hdev);
-		}
-
-		break;
-	default:
-		break;
-	}
+	lenovo_features_set_cptkbd(hdev);
 
 	return 0;
 }