[v5] scripts/link-vmlinux.sh: Add alias to duplicate symbols for kallsyms

Message ID 20230927173516.1456594-1-alessandro.carminati@gmail.com
State New
Headers
Series [v5] scripts/link-vmlinux.sh: Add alias to duplicate symbols for kallsyms |

Commit Message

Alessandro Carminati (Red Hat) Sept. 27, 2023, 5:35 p.m. UTC
  It is not uncommon for drivers or modules related to similar peripherals
to have symbols with the exact same name.
While this is not a problem for the kernel's binary itself, it becomes an
issue when attempting to trace or probe specific functions using
infrastructure like ftrace or kprobe.

The tracing subsystem relies on the `nm -n vmlinux` output, which provides
symbol information from the kernel's ELF binary. However, when multiple
symbols share the same name, the standard nm output does not differentiate
between them. This can lead to confusion and difficulty when trying to
probe the intended symbol.

 ~ # cat /proc/kallsyms | grep " name_show"
 ffffffff8c4f76d0 t name_show
 ffffffff8c9cccb0 t name_show
 ffffffff8cb0ac20 t name_show
 ffffffff8cc728c0 t name_show
 ffffffff8ce0efd0 t name_show
 ffffffff8ce126c0 t name_show
 ffffffff8ce1dd20 t name_show
 ffffffff8ce24e70 t name_show
 ffffffff8d1104c0 t name_show
 ffffffff8d1fe480 t name_show

kas_alias addresses this challenge by enhancing symbol names with
meaningful suffixes generated from the source file and line number
during the kernel build process.
These newly generated aliases provide tracers with the ability to
comprehend the symbols they are interacting with when utilizing the
ftracefs interface.
This approach may also allow for the probing by name of previously
inaccessible symbols.

 ~ # cat /proc/kallsyms | grep gic_mask_irq
 ffffd15671e505ac t gic_mask_irq
 ffffd15671e505ac t gic_mask_irq@drivers_irqchip_irq_gic_c_167
 ffffd15671e532a4 t gic_mask_irq
 ffffd15671e532a4 t gic_mask_irq@drivers_irqchip_irq_gic_v3_c_407
 ~ #

Changes from v1:
- Integrated changes requested by Masami to exclude symbols with prefixes
  "_cfi" and "_pfx".
- Introduced a small framework to handle patterns that need to be excluded
  from the alias production.
- Excluded other symbols using the framework.
- Introduced the ability to discriminate between text and data symbols.
- Added two new config symbols in this version: CONFIG_KALLSYMS_ALIAS_DATA,
  which allows data for data, and CONFIG_KALLSYMS_ALIAS_DATA_ALL, which
  excludes all filters and provides an alias for each duplicated symbol.

https://lore.kernel.org/all/20230711151925.1092080-1-alessandro.carminati@gmail.com/

Changes from v2:
- Alias tags are created by querying DWARF information from the vmlinux.
- The filename + line number is normalized and appended to the original
  name.
- The tag begins with '@' to indicate the symbol source.
- Not a change, but worth mentioning, since the alias is added to the
  existing list, the old duplicated name is preserved, and the livepatch
  way of dealing with duplicates is maintained.
- Acknowledging the existence of scenarios where inlined functions
  declared in header files may result in multiple copies due to compiler
  behavior, though it is not actionable as it does not pose an operational
  issue.
- Highlighting a single exception where the same name refers to different
  functions: the case of "compat_binfmt_elf.c," which directly includes
  "binfmt_elf.c" producing identical function copies in two separate
  modules.

https://lore.kernel.org/all/20230714150326.1152359-1-alessandro.carminati@gmail.com/

Changes from v3:
- kas_alias was rewritten in Python to create a more concise and
  maintainable codebase.
- The previous automation process used by kas_alias to locate the vmlinux
  and the addr2line has been replaced with an explicit command-line switch
  for specifying these requirements.
- addr2line has been added into the main Makefile.
- A new command-line switch has been introduced, enabling users to extend
  the alias to global data names.

https://lore.kernel.org/all/20230828080423.3539686-1-alessandro.carminati@gmail.com/

Changes from v4:
- Fixed the O=<build dir> build issue
- The tool halts execution upon encountering major issues, thereby ensuring
  the pipeline is interrupted.
- A cmdline option to specify the source directory added.
- Minor code adjusments.
- Tested on mips32 and i386

https://lore.kernel.org/all/20230919193948.465340-1-alessandro.carminati@gmail.com/

NOTE:
About the symbols name duplication that happens as consequence of the
inclusion compat_binfmt_elf.c does, it is evident that this corner is
inherently challenging the addr2line approach.
Attempting to conceal this limitation would be counterproductive.

compat_binfmt_elf.c includes directly binfmt_elf.c, addr2line can't help
but report all functions and data declared by that file, coming from
binfmt_elf.c.

My position is that, rather than producing a more complicated pipeline
to handle this corner case, it is better to fix the compat_binfmt_elf.c
anomaly.

This patch does not deal with the two potentially problematic symbols
defined by compat_binfmt_elf.c

Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
---
 Makefile                |   4 +-
 init/Kconfig            |  22 +++++++
 scripts/kas_alias.py    | 136 ++++++++++++++++++++++++++++++++++++++++
 scripts/link-vmlinux.sh |  21 ++++++-
 4 files changed, 180 insertions(+), 3 deletions(-)
 create mode 100755 scripts/kas_alias.py
  

Comments

Masami Hiramatsu (Google) Sept. 29, 2023, 11:28 a.m. UTC | #1
On Wed, 27 Sep 2023 17:35:16 +0000
"Alessandro Carminati (Red Hat)" <alessandro.carminati@gmail.com> wrote:

> It is not uncommon for drivers or modules related to similar peripherals
> to have symbols with the exact same name.
> While this is not a problem for the kernel's binary itself, it becomes an
> issue when attempting to trace or probe specific functions using
> infrastructure like ftrace or kprobe.
> 
> The tracing subsystem relies on the `nm -n vmlinux` output, which provides
> symbol information from the kernel's ELF binary. However, when multiple
> symbols share the same name, the standard nm output does not differentiate
> between them. This can lead to confusion and difficulty when trying to
> probe the intended symbol.
> 
>  ~ # cat /proc/kallsyms | grep " name_show"
>  ffffffff8c4f76d0 t name_show
>  ffffffff8c9cccb0 t name_show
>  ffffffff8cb0ac20 t name_show
>  ffffffff8cc728c0 t name_show
>  ffffffff8ce0efd0 t name_show
>  ffffffff8ce126c0 t name_show
>  ffffffff8ce1dd20 t name_show
>  ffffffff8ce24e70 t name_show
>  ffffffff8d1104c0 t name_show
>  ffffffff8d1fe480 t name_show
> 
> kas_alias addresses this challenge by enhancing symbol names with
> meaningful suffixes generated from the source file and line number
> during the kernel build process.
> These newly generated aliases provide tracers with the ability to
> comprehend the symbols they are interacting with when utilizing the
> ftracefs interface.
> This approach may also allow for the probing by name of previously
> inaccessible symbols.
> 
>  ~ # cat /proc/kallsyms | grep gic_mask_irq
>  ffffd15671e505ac t gic_mask_irq
>  ffffd15671e505ac t gic_mask_irq@drivers_irqchip_irq_gic_c_167
>  ffffd15671e532a4 t gic_mask_irq
>  ffffd15671e532a4 t gic_mask_irq@drivers_irqchip_irq_gic_v3_c_407
>  ~ #
> 
> Changes from v1:
> - Integrated changes requested by Masami to exclude symbols with prefixes
>   "_cfi" and "_pfx".
> - Introduced a small framework to handle patterns that need to be excluded
>   from the alias production.
> - Excluded other symbols using the framework.
> - Introduced the ability to discriminate between text and data symbols.
> - Added two new config symbols in this version: CONFIG_KALLSYMS_ALIAS_DATA,
>   which allows data for data, and CONFIG_KALLSYMS_ALIAS_DATA_ALL, which
>   excludes all filters and provides an alias for each duplicated symbol.
> 
> https://lore.kernel.org/all/20230711151925.1092080-1-alessandro.carminati@gmail.com/
> 
> Changes from v2:
> - Alias tags are created by querying DWARF information from the vmlinux.
> - The filename + line number is normalized and appended to the original
>   name.
> - The tag begins with '@' to indicate the symbol source.
> - Not a change, but worth mentioning, since the alias is added to the
>   existing list, the old duplicated name is preserved, and the livepatch
>   way of dealing with duplicates is maintained.
> - Acknowledging the existence of scenarios where inlined functions
>   declared in header files may result in multiple copies due to compiler
>   behavior, though it is not actionable as it does not pose an operational
>   issue.
> - Highlighting a single exception where the same name refers to different
>   functions: the case of "compat_binfmt_elf.c," which directly includes
>   "binfmt_elf.c" producing identical function copies in two separate
>   modules.
> 
> https://lore.kernel.org/all/20230714150326.1152359-1-alessandro.carminati@gmail.com/
> 
> Changes from v3:
> - kas_alias was rewritten in Python to create a more concise and
>   maintainable codebase.
> - The previous automation process used by kas_alias to locate the vmlinux
>   and the addr2line has been replaced with an explicit command-line switch
>   for specifying these requirements.
> - addr2line has been added into the main Makefile.
> - A new command-line switch has been introduced, enabling users to extend
>   the alias to global data names.
> 
> https://lore.kernel.org/all/20230828080423.3539686-1-alessandro.carminati@gmail.com/
> 
> Changes from v4:
> - Fixed the O=<build dir> build issue
> - The tool halts execution upon encountering major issues, thereby ensuring
>   the pipeline is interrupted.
> - A cmdline option to specify the source directory added.
> - Minor code adjusments.
> - Tested on mips32 and i386
> 
> https://lore.kernel.org/all/20230919193948.465340-1-alessandro.carminati@gmail.com/
> 
> NOTE:
> About the symbols name duplication that happens as consequence of the
> inclusion compat_binfmt_elf.c does, it is evident that this corner is
> inherently challenging the addr2line approach.
> Attempting to conceal this limitation would be counterproductive.
> 
> compat_binfmt_elf.c includes directly binfmt_elf.c, addr2line can't help
> but report all functions and data declared by that file, coming from
> binfmt_elf.c.
> 
> My position is that, rather than producing a more complicated pipeline
> to handle this corner case, it is better to fix the compat_binfmt_elf.c
> anomaly.
> 
> This patch does not deal with the two potentially problematic symbols
> defined by compat_binfmt_elf.c

Thanks for update! I confirmed that the suffixes on the same-name symbols.
But I have one comment below;

> 
> Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
> ---
>  Makefile                |   4 +-
>  init/Kconfig            |  22 +++++++
>  scripts/kas_alias.py    | 136 ++++++++++++++++++++++++++++++++++++++++
>  scripts/link-vmlinux.sh |  21 ++++++-
>  4 files changed, 180 insertions(+), 3 deletions(-)
>  create mode 100755 scripts/kas_alias.py
> 
> diff --git a/Makefile b/Makefile
> index 4f283d915e54..f33c179f4cc3 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -488,6 +488,7 @@ OBJCOPY		= $(LLVM_PREFIX)llvm-objcopy$(LLVM_SUFFIX)
>  OBJDUMP		= $(LLVM_PREFIX)llvm-objdump$(LLVM_SUFFIX)
>  READELF		= $(LLVM_PREFIX)llvm-readelf$(LLVM_SUFFIX)
>  STRIP		= $(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX)
> +ADDR2LINE	= $(LLVM_PREFIX)llvm-addr2line$(LLVM_SUFFIX)
>  else
>  CC		= $(CROSS_COMPILE)gcc
>  LD		= $(CROSS_COMPILE)ld
> @@ -497,6 +498,7 @@ OBJCOPY		= $(CROSS_COMPILE)objcopy
>  OBJDUMP		= $(CROSS_COMPILE)objdump
>  READELF		= $(CROSS_COMPILE)readelf
>  STRIP		= $(CROSS_COMPILE)strip
> +ADDR2LINE	= $(CROSS_COMPILE)addr2line
>  endif
>  RUSTC		= rustc
>  RUSTDOC		= rustdoc
> @@ -611,7 +613,7 @@ export RUSTC_BOOTSTRAP := 1
>  export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG
>  export RUSTC RUSTDOC RUSTFMT RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN CARGO
>  export HOSTRUSTC KBUILD_HOSTRUSTFLAGS
> -export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
> +export CPP AR NM STRIP OBJCOPY OBJDUMP READELF ADDR2LINE PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
>  export PERL PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
>  export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD
>  export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
> diff --git a/init/Kconfig b/init/Kconfig
> index 6d35728b94b2..d45dd423e1ec 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -1738,6 +1738,28 @@ config KALLSYMS_BASE_RELATIVE
>  	  time constants, and no relocation pass is required at runtime to fix
>  	  up the entries based on the runtime load address of the kernel.
>  
> +config KALLSYMS_ALIAS_SRCLINE
> +	bool "Produces alias for duplicated text symbols" if EXPERT
> +	depends on KALLSYMS && DEBUG_INFO && !DEBUG_INFO_SPLIT
> +	help
> +	  It is not uncommon for drivers or modules related to similar
> +	  peripherals to have symbols with the exact same name.
> +	  While this is not a problem for the kernel's binary itself, it
> +	  becomes an issue when attempting to trace or probe specific
> +	  functions using infrastructure like ftrace or kprobe.
> +
> +	  This option addresses this challenge, producing alias for text
> +	  symbol names that include the file name and line where the symbols
> +	  are defined in the source code.
> +
> +config KALLSYMS_ALIAS_SRCLINE_DATA
> +	bool "Produces alias also for global variables names"
> +	depends on KALLSYMS_ALIAS_SRCLINE
> +	help
> +	  Sometimes it can be useful to refer to global vars by name. Since
> +	  they suffer the same issue as text symbols, this config option
> +	  allows having aliases for global variables names too.
> +
>  # end of the "standard kernel features (expert users)" menu
>  
>  # syscall, maps, verifier
> diff --git a/scripts/kas_alias.py b/scripts/kas_alias.py
> new file mode 100755
> index 000000000000..7c6b7045081c
> --- /dev/null
> +++ b/scripts/kas_alias.py
> @@ -0,0 +1,136 @@
> +#!/usr/bin/env python3
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Copyright (C) 2023 Red Hat, Inc. Alessandro Carminati <alessandro.carminati@gmail.com>
> +#
> +# kas_alias: Adds alias to duplicate symbols in the kallsyms output.
> +
> +import subprocess
> +import sys
> +import os
> +import argparse
> +import re
> +from collections import namedtuple
> +
> +regex_filter = [
> +        "^__compound_literal\\.[0-9]+$",
> +        "^__[wm]*key\\.[0-9]+$",
> +        "^_*TRACE_SYSTEM.*$",
> +        "^__already_done\\.[0-9]+$",
> +        "^__msg\\.[0-9]+$",
> +        "^__func__\\.[0-9]+$",
> +        "^CSWTCH\\.[0-9]+$",
> +        "^_rs\\.[0-9]+$",
> +        "^___tp_str\\.[0-9]+$",
> +        "^__flags\\.[0-9]+$",
> +        "^___done\\.[0-9]+$",
> +        "^__print_once\\.[0-9]+$",
> +        "^___once_key\\.[0-9]+$",
> +        "^__pfx_.*$",
> +        "^__cfi_.*$"
> +        ]

I saw __pfx_ symbols have suffixes too, this is because this filter is
only applied when the kas_alias is enabled for data symbols .

> +
> +class SeparatorType:
> +    def __call__(self, separator):
> +        if len(separator) != 1:
> +            raise argparse.ArgumentTypeError("Separator must be a single character")
> +        return separator
> +
> +Line = namedtuple('Line', ['address', 'type', 'name'])
> +
> +def parse_file(filename):
> +    symbol_list = []
> +    name_occurrences = {}
> +
> +    with open(filename, 'r') as file:
> +        for line in file:
> +            fields = line.strip().split()
> +
> +            if len(fields) >= 3:
> +                address, type, name = fields[0], fields[1], ' '.join(fields[2:])
> +                symbol_list.append(Line(address, type, name))
> +                name_occurrences[name] = name_occurrences.get(name, 0) + 1
> +
> +    return symbol_list, name_occurrences
> +
> +def find_duplicate(symbol_list, name_occurrences):
> +    name_to_lines = {}
> +    duplicate_lines = []
> +
> +    for line in symbol_list:
> +        if line.name in name_to_lines:
> +            first_occurrence = name_to_lines[line.name]
> +            duplicate_lines.extend([first_occurrence, line])
> +        else:
> +            name_to_lines[line.name] = line
> +
> +    return duplicate_lines
> +
> +def start_addr2line_process(binary_file, addr2line_file):
> +    try:
> +        addr2line_process = subprocess.Popen([addr2line_file, '-fe', binary_file],
> +                                             stdin=subprocess.PIPE,
> +                                             stdout=subprocess.PIPE,
> +                                             stderr=subprocess.PIPE,
> +                                             text=True)
> +        return addr2line_process
> +    except Exception as e:
> +        print(f"Error starting addr2line process: {str(e)}")
> +        sys.exit(1)
> +
> +def addr2line_fetch_address(addr2line_process, address):
> +    try:
> +        addr2line_process.stdin.write(address + '\n')
> +        addr2line_process.stdin.flush()
> +        addr2line_process.stdout.readline().strip()
> +        output = addr2line_process.stdout.readline().strip()
> +
> +        return os.path.normpath(output)
> +    except Exception as e:
> +        print(f"Error communicating with addr2line: {str(e)}")
> +        sys.exit(1)
> +
> +def process_line(obj, config):
> +    if config:
> +        return not (any(re.match(regex, obj.name) for regex in regex_filter))
> +    else:
> +        return obj.type in {"T", "t"}

Here is the problem. The regex_filter check must be done for all text symbols
if config == False. (BTW, this 'config' is too generic name, 'text_only' will
be more readable.)

Thank you,

> +
> +if __name__ == "__main__":
> +    parser = argparse.ArgumentParser(description='Add alias to multiple occurring symbols name in kallsyms')
> +    parser.add_argument('-a', "--addr2line", dest="addr2line_file", required=True)
> +    parser.add_argument('-v', "--vmlinux", dest="vmlinux_file", required=True)
> +    parser.add_argument('-o', "--outfile", dest="output_file", required=True)
> +    parser.add_argument('-n', "--nmdata", dest="nm_data_file", required=True)
> +    parser.add_argument('-b', "--basedir", dest="linux_base_dir", required=True)
> +    parser.add_argument('-s', "--separator", dest="separator", required=False, default="@", type=SeparatorType())
> +    parser.add_argument('-d', "--data", dest="include_data", required=False, action='store_true')
> +    config = parser.parse_args()
> +
> +    try:
> +        config.linux_base_dir = os.path.normpath(os.getcwd() + "/" + config.linux_base_dir) + "/"
> +        symbol_list, name_occurrences = parse_file(config.nm_data_file)
> +        addr2line_process = start_addr2line_process(config.vmlinux_file, config.addr2line_file)
> +
> +        with open(config.output_file, 'w') as file:
> +            for obj in symbol_list:
> +                file.write(f"{obj.address} {obj.type} {obj.name}\n")
> +                if (name_occurrences[obj.name] > 1) and process_line(obj, config.include_data) :
> +                    output = addr2line_fetch_address(addr2line_process, obj.address)
> +                    decoration = config.separator + "".join(
> +                        "_" if not c.isalnum() else c for c in output.replace(config.linux_base_dir, "")
> +                    )
> +                    # The addr2line can emit the special string "?:??" when addr2line can not find the
> +                    # specified address in the DWARF section that after normalization it becomes "____".
> +                    # In such cases, emitting an alias wouldn't make sense, so it is skipped.
> +                    if decoration != config.separator + "____":
> +                        file.write(f"{obj.address} {obj.type} {obj.name + decoration}\n")
> +
> +        addr2line_process.stdin.close()
> +        addr2line_process.stdout.close()
> +        addr2line_process.stderr.close()
> +        addr2line_process.wait()
> +
> +    except Exception as e:
> +        print(f"An error occurred: {str(e)}")
> +        raise SystemExit("Script terminated due to an error")
> diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
> index a432b171be82..c110b0f58a19 100755
> --- a/scripts/link-vmlinux.sh
> +++ b/scripts/link-vmlinux.sh
> @@ -91,7 +91,12 @@ vmlinux_link()
>  
>  	# The kallsyms linking does not need debug symbols included.
>  	if [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
> -		ldflags="${ldflags} ${wl}--strip-debug"
> +		# The kallsyms linking does not need debug symbols included,
> +		# unless the KALLSYMS_ALIAS_SRCLINE.
> +		if ! is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE && \
> +		   [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
> +			ldflags="${ldflags} ${wl}--strip-debug"
> +		fi
>  	fi
>  
>  	if is_enabled CONFIG_VMLINUX_MAP; then
> @@ -161,7 +166,19 @@ kallsyms()
>  	fi
>  
>  	info KSYMS ${2}
> -	scripts/kallsyms ${kallsymopt} ${1} > ${2}
> +	ALIAS=""
> +	KAS_DATA=""
> +	if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE_DATA; then
> +		KAS_DATA="--data"
> +	fi
> +	if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE; then
> +		ALIAS=".alias"
> +		${srctree}/scripts/kas_alias.py \
> +			--addr2line ${ADDR2LINE} --vmlinux ${kallsyms_vmlinux} \
> +			--nmdata ${1} --outfile ${1}${ALIAS} \
> +			--basedir ${srctree} --separator @ ${KAS_DATA}
> +	fi
> +	scripts/kallsyms ${kallsymopt} ${1}${ALIAS} > ${2}
>  }
>  
>  # Perform one step in kallsyms generation, including temporary linking of
> -- 
> 2.34.1
>
  
Alessandro Carminati (Red Hat) Sept. 29, 2023, 4:03 p.m. UTC | #2
Hello Masami,

Thank you for your feedback.


Il giorno ven 29 set 2023 alle ore 13:28 Masami Hiramatsu
<mhiramat@kernel.org> ha scritto:
>
> On Wed, 27 Sep 2023 17:35:16 +0000
> "Alessandro Carminati (Red Hat)" <alessandro.carminati@gmail.com> wrote:
>
> > It is not uncommon for drivers or modules related to similar peripherals
> > to have symbols with the exact same name.
> > While this is not a problem for the kernel's binary itself, it becomes an
> > issue when attempting to trace or probe specific functions using
> > infrastructure like ftrace or kprobe.
> >
> > The tracing subsystem relies on the `nm -n vmlinux` output, which provides
> > symbol information from the kernel's ELF binary. However, when multiple
> > symbols share the same name, the standard nm output does not differentiate
> > between them. This can lead to confusion and difficulty when trying to
> > probe the intended symbol.
> >
> >  ~ # cat /proc/kallsyms | grep " name_show"
> >  ffffffff8c4f76d0 t name_show
> >  ffffffff8c9cccb0 t name_show
> >  ffffffff8cb0ac20 t name_show
> >  ffffffff8cc728c0 t name_show
> >  ffffffff8ce0efd0 t name_show
> >  ffffffff8ce126c0 t name_show
> >  ffffffff8ce1dd20 t name_show
> >  ffffffff8ce24e70 t name_show
> >  ffffffff8d1104c0 t name_show
> >  ffffffff8d1fe480 t name_show
> >
> > kas_alias addresses this challenge by enhancing symbol names with
> > meaningful suffixes generated from the source file and line number
> > during the kernel build process.
> > These newly generated aliases provide tracers with the ability to
> > comprehend the symbols they are interacting with when utilizing the
> > ftracefs interface.
> > This approach may also allow for the probing by name of previously
> > inaccessible symbols.
> >
> >  ~ # cat /proc/kallsyms | grep gic_mask_irq
> >  ffffd15671e505ac t gic_mask_irq
> >  ffffd15671e505ac t gic_mask_irq@drivers_irqchip_irq_gic_c_167
> >  ffffd15671e532a4 t gic_mask_irq
> >  ffffd15671e532a4 t gic_mask_irq@drivers_irqchip_irq_gic_v3_c_407
> >  ~ #
> >
> > Changes from v1:
> > - Integrated changes requested by Masami to exclude symbols with prefixes
> >   "_cfi" and "_pfx".
> > - Introduced a small framework to handle patterns that need to be excluded
> >   from the alias production.
> > - Excluded other symbols using the framework.
> > - Introduced the ability to discriminate between text and data symbols.
> > - Added two new config symbols in this version: CONFIG_KALLSYMS_ALIAS_DATA,
> >   which allows data for data, and CONFIG_KALLSYMS_ALIAS_DATA_ALL, which
> >   excludes all filters and provides an alias for each duplicated symbol.
> >
> > https://lore.kernel.org/all/20230711151925.1092080-1-alessandro.carminati@gmail.com/
> >
> > Changes from v2:
> > - Alias tags are created by querying DWARF information from the vmlinux.
> > - The filename + line number is normalized and appended to the original
> >   name.
> > - The tag begins with '@' to indicate the symbol source.
> > - Not a change, but worth mentioning, since the alias is added to the
> >   existing list, the old duplicated name is preserved, and the livepatch
> >   way of dealing with duplicates is maintained.
> > - Acknowledging the existence of scenarios where inlined functions
> >   declared in header files may result in multiple copies due to compiler
> >   behavior, though it is not actionable as it does not pose an operational
> >   issue.
> > - Highlighting a single exception where the same name refers to different
> >   functions: the case of "compat_binfmt_elf.c," which directly includes
> >   "binfmt_elf.c" producing identical function copies in two separate
> >   modules.
> >
> > https://lore.kernel.org/all/20230714150326.1152359-1-alessandro.carminati@gmail.com/
> >
> > Changes from v3:
> > - kas_alias was rewritten in Python to create a more concise and
> >   maintainable codebase.
> > - The previous automation process used by kas_alias to locate the vmlinux
> >   and the addr2line has been replaced with an explicit command-line switch
> >   for specifying these requirements.
> > - addr2line has been added into the main Makefile.
> > - A new command-line switch has been introduced, enabling users to extend
> >   the alias to global data names.
> >
> > https://lore.kernel.org/all/20230828080423.3539686-1-alessandro.carminati@gmail.com/
> >
> > Changes from v4:
> > - Fixed the O=<build dir> build issue
> > - The tool halts execution upon encountering major issues, thereby ensuring
> >   the pipeline is interrupted.
> > - A cmdline option to specify the source directory added.
> > - Minor code adjusments.
> > - Tested on mips32 and i386
> >
> > https://lore.kernel.org/all/20230919193948.465340-1-alessandro.carminati@gmail.com/
> >
> > NOTE:
> > About the symbols name duplication that happens as consequence of the
> > inclusion compat_binfmt_elf.c does, it is evident that this corner is
> > inherently challenging the addr2line approach.
> > Attempting to conceal this limitation would be counterproductive.
> >
> > compat_binfmt_elf.c includes directly binfmt_elf.c, addr2line can't help
> > but report all functions and data declared by that file, coming from
> > binfmt_elf.c.
> >
> > My position is that, rather than producing a more complicated pipeline
> > to handle this corner case, it is better to fix the compat_binfmt_elf.c
> > anomaly.
> >
> > This patch does not deal with the two potentially problematic symbols
> > defined by compat_binfmt_elf.c
>
> Thanks for update! I confirmed that the suffixes on the same-name symbols.
> But I have one comment below;
>
> >
> > Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
> > ---
> >  Makefile                |   4 +-
> >  init/Kconfig            |  22 +++++++
> >  scripts/kas_alias.py    | 136 ++++++++++++++++++++++++++++++++++++++++
> >  scripts/link-vmlinux.sh |  21 ++++++-
> >  4 files changed, 180 insertions(+), 3 deletions(-)
> >  create mode 100755 scripts/kas_alias.py
> >
> > diff --git a/Makefile b/Makefile
> > index 4f283d915e54..f33c179f4cc3 100644
> > --- a/Makefile
> > +++ b/Makefile
> > @@ -488,6 +488,7 @@ OBJCOPY           = $(LLVM_PREFIX)llvm-objcopy$(LLVM_SUFFIX)
> >  OBJDUMP              = $(LLVM_PREFIX)llvm-objdump$(LLVM_SUFFIX)
> >  READELF              = $(LLVM_PREFIX)llvm-readelf$(LLVM_SUFFIX)
> >  STRIP                = $(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX)
> > +ADDR2LINE    = $(LLVM_PREFIX)llvm-addr2line$(LLVM_SUFFIX)
> >  else
> >  CC           = $(CROSS_COMPILE)gcc
> >  LD           = $(CROSS_COMPILE)ld
> > @@ -497,6 +498,7 @@ OBJCOPY           = $(CROSS_COMPILE)objcopy
> >  OBJDUMP              = $(CROSS_COMPILE)objdump
> >  READELF              = $(CROSS_COMPILE)readelf
> >  STRIP                = $(CROSS_COMPILE)strip
> > +ADDR2LINE    = $(CROSS_COMPILE)addr2line
> >  endif
> >  RUSTC                = rustc
> >  RUSTDOC              = rustdoc
> > @@ -611,7 +613,7 @@ export RUSTC_BOOTSTRAP := 1
> >  export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG
> >  export RUSTC RUSTDOC RUSTFMT RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN CARGO
> >  export HOSTRUSTC KBUILD_HOSTRUSTFLAGS
> > -export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
> > +export CPP AR NM STRIP OBJCOPY OBJDUMP READELF ADDR2LINE PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
> >  export PERL PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
> >  export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD
> >  export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
> > diff --git a/init/Kconfig b/init/Kconfig
> > index 6d35728b94b2..d45dd423e1ec 100644
> > --- a/init/Kconfig
> > +++ b/init/Kconfig
> > @@ -1738,6 +1738,28 @@ config KALLSYMS_BASE_RELATIVE
> >         time constants, and no relocation pass is required at runtime to fix
> >         up the entries based on the runtime load address of the kernel.
> >
> > +config KALLSYMS_ALIAS_SRCLINE
> > +     bool "Produces alias for duplicated text symbols" if EXPERT
> > +     depends on KALLSYMS && DEBUG_INFO && !DEBUG_INFO_SPLIT
> > +     help
> > +       It is not uncommon for drivers or modules related to similar
> > +       peripherals to have symbols with the exact same name.
> > +       While this is not a problem for the kernel's binary itself, it
> > +       becomes an issue when attempting to trace or probe specific
> > +       functions using infrastructure like ftrace or kprobe.
> > +
> > +       This option addresses this challenge, producing alias for text
> > +       symbol names that include the file name and line where the symbols
> > +       are defined in the source code.
> > +
> > +config KALLSYMS_ALIAS_SRCLINE_DATA
> > +     bool "Produces alias also for global variables names"
> > +     depends on KALLSYMS_ALIAS_SRCLINE
> > +     help
> > +       Sometimes it can be useful to refer to global vars by name. Since
> > +       they suffer the same issue as text symbols, this config option
> > +       allows having aliases for global variables names too.
> > +
> >  # end of the "standard kernel features (expert users)" menu
> >
> >  # syscall, maps, verifier
> > diff --git a/scripts/kas_alias.py b/scripts/kas_alias.py
> > new file mode 100755
> > index 000000000000..7c6b7045081c
> > --- /dev/null
> > +++ b/scripts/kas_alias.py
> > @@ -0,0 +1,136 @@
> > +#!/usr/bin/env python3
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +#
> > +# Copyright (C) 2023 Red Hat, Inc. Alessandro Carminati <alessandro.carminati@gmail.com>
> > +#
> > +# kas_alias: Adds alias to duplicate symbols in the kallsyms output.
> > +
> > +import subprocess
> > +import sys
> > +import os
> > +import argparse
> > +import re
> > +from collections import namedtuple
> > +
> > +regex_filter = [
> > +        "^__compound_literal\\.[0-9]+$",
> > +        "^__[wm]*key\\.[0-9]+$",
> > +        "^_*TRACE_SYSTEM.*$",
> > +        "^__already_done\\.[0-9]+$",
> > +        "^__msg\\.[0-9]+$",
> > +        "^__func__\\.[0-9]+$",
> > +        "^CSWTCH\\.[0-9]+$",
> > +        "^_rs\\.[0-9]+$",
> > +        "^___tp_str\\.[0-9]+$",
> > +        "^__flags\\.[0-9]+$",
> > +        "^___done\\.[0-9]+$",
> > +        "^__print_once\\.[0-9]+$",
> > +        "^___once_key\\.[0-9]+$",
> > +        "^__pfx_.*$",
> > +        "^__cfi_.*$"
> > +        ]
>
> I saw __pfx_ symbols have suffixes too, this is because this filter is
> only applied when the kas_alias is enabled for data symbols .
>
> > +
> > +class SeparatorType:
> > +    def __call__(self, separator):
> > +        if len(separator) != 1:
> > +            raise argparse.ArgumentTypeError("Separator must be a single character")
> > +        return separator
> > +
> > +Line = namedtuple('Line', ['address', 'type', 'name'])
> > +
> > +def parse_file(filename):
> > +    symbol_list = []
> > +    name_occurrences = {}
> > +
> > +    with open(filename, 'r') as file:
> > +        for line in file:
> > +            fields = line.strip().split()
> > +
> > +            if len(fields) >= 3:
> > +                address, type, name = fields[0], fields[1], ' '.join(fields[2:])
> > +                symbol_list.append(Line(address, type, name))
> > +                name_occurrences[name] = name_occurrences.get(name, 0) + 1
> > +
> > +    return symbol_list, name_occurrences
> > +
> > +def find_duplicate(symbol_list, name_occurrences):
> > +    name_to_lines = {}
> > +    duplicate_lines = []
> > +
> > +    for line in symbol_list:
> > +        if line.name in name_to_lines:
> > +            first_occurrence = name_to_lines[line.name]
> > +            duplicate_lines.extend([first_occurrence, line])
> > +        else:
> > +            name_to_lines[line.name] = line
> > +
> > +    return duplicate_lines
> > +
> > +def start_addr2line_process(binary_file, addr2line_file):
> > +    try:
> > +        addr2line_process = subprocess.Popen([addr2line_file, '-fe', binary_file],
> > +                                             stdin=subprocess.PIPE,
> > +                                             stdout=subprocess.PIPE,
> > +                                             stderr=subprocess.PIPE,
> > +                                             text=True)
> > +        return addr2line_process
> > +    except Exception as e:
> > +        print(f"Error starting addr2line process: {str(e)}")
> > +        sys.exit(1)
> > +
> > +def addr2line_fetch_address(addr2line_process, address):
> > +    try:
> > +        addr2line_process.stdin.write(address + '\n')
> > +        addr2line_process.stdin.flush()
> > +        addr2line_process.stdout.readline().strip()
> > +        output = addr2line_process.stdout.readline().strip()
> > +
> > +        return os.path.normpath(output)
> > +    except Exception as e:
> > +        print(f"Error communicating with addr2line: {str(e)}")
> > +        sys.exit(1)
> > +
> > +def process_line(obj, config):
> > +    if config:
> > +        return not (any(re.match(regex, obj.name) for regex in regex_filter))
> > +    else:
> > +        return obj.type in {"T", "t"}
>
> Here is the problem. The regex_filter check must be done for all text symbols
> if config == False. (BTW, this 'config' is too generic name, 'text_only' will
> be more readable.)

Initially, I had a performance concern about extending the regex check to
all symbols. However, after conducting some testing, I agree that extending
the check to both text and data symbols does indeed result in a negligible
performance penalty.

I'll take your suggestion into consideration and make the necessary changes
to improve readability by renaming 'config' to 'process_data_sym'.
I'll be sure to
incorporate these suggestions in a new version of the code.
Your feedback is invaluable, and I appreciate your patience.

Regards.
Alessandro
>
> Thank you,
>
> > +
> > +if __name__ == "__main__":
> > +    parser = argparse.ArgumentParser(description='Add alias to multiple occurring symbols name in kallsyms')
> > +    parser.add_argument('-a', "--addr2line", dest="addr2line_file", required=True)
> > +    parser.add_argument('-v', "--vmlinux", dest="vmlinux_file", required=True)
> > +    parser.add_argument('-o', "--outfile", dest="output_file", required=True)
> > +    parser.add_argument('-n', "--nmdata", dest="nm_data_file", required=True)
> > +    parser.add_argument('-b', "--basedir", dest="linux_base_dir", required=True)
> > +    parser.add_argument('-s', "--separator", dest="separator", required=False, default="@", type=SeparatorType())
> > +    parser.add_argument('-d', "--data", dest="include_data", required=False, action='store_true')
> > +    config = parser.parse_args()
> > +
> > +    try:
> > +        config.linux_base_dir = os.path.normpath(os.getcwd() + "/" + config.linux_base_dir) + "/"
> > +        symbol_list, name_occurrences = parse_file(config.nm_data_file)
> > +        addr2line_process = start_addr2line_process(config.vmlinux_file, config.addr2line_file)
> > +
> > +        with open(config.output_file, 'w') as file:
> > +            for obj in symbol_list:
> > +                file.write(f"{obj.address} {obj.type} {obj.name}\n")
> > +                if (name_occurrences[obj.name] > 1) and process_line(obj, config.include_data) :
> > +                    output = addr2line_fetch_address(addr2line_process, obj.address)
> > +                    decoration = config.separator + "".join(
> > +                        "_" if not c.isalnum() else c for c in output.replace(config.linux_base_dir, "")
> > +                    )
> > +                    # The addr2line can emit the special string "?:??" when addr2line can not find the
> > +                    # specified address in the DWARF section that after normalization it becomes "____".
> > +                    # In such cases, emitting an alias wouldn't make sense, so it is skipped.
> > +                    if decoration != config.separator + "____":
> > +                        file.write(f"{obj.address} {obj.type} {obj.name + decoration}\n")
> > +
> > +        addr2line_process.stdin.close()
> > +        addr2line_process.stdout.close()
> > +        addr2line_process.stderr.close()
> > +        addr2line_process.wait()
> > +
> > +    except Exception as e:
> > +        print(f"An error occurred: {str(e)}")
> > +        raise SystemExit("Script terminated due to an error")
> > diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
> > index a432b171be82..c110b0f58a19 100755
> > --- a/scripts/link-vmlinux.sh
> > +++ b/scripts/link-vmlinux.sh
> > @@ -91,7 +91,12 @@ vmlinux_link()
> >
> >       # The kallsyms linking does not need debug symbols included.
> >       if [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
> > -             ldflags="${ldflags} ${wl}--strip-debug"
> > +             # The kallsyms linking does not need debug symbols included,
> > +             # unless the KALLSYMS_ALIAS_SRCLINE.
> > +             if ! is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE && \
> > +                [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
> > +                     ldflags="${ldflags} ${wl}--strip-debug"
> > +             fi
> >       fi
> >
> >       if is_enabled CONFIG_VMLINUX_MAP; then
> > @@ -161,7 +166,19 @@ kallsyms()
> >       fi
> >
> >       info KSYMS ${2}
> > -     scripts/kallsyms ${kallsymopt} ${1} > ${2}
> > +     ALIAS=""
> > +     KAS_DATA=""
> > +     if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE_DATA; then
> > +             KAS_DATA="--data"
> > +     fi
> > +     if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE; then
> > +             ALIAS=".alias"
> > +             ${srctree}/scripts/kas_alias.py \
> > +                     --addr2line ${ADDR2LINE} --vmlinux ${kallsyms_vmlinux} \
> > +                     --nmdata ${1} --outfile ${1}${ALIAS} \
> > +                     --basedir ${srctree} --separator @ ${KAS_DATA}
> > +     fi
> > +     scripts/kallsyms ${kallsymopt} ${1}${ALIAS} > ${2}
> >  }
> >
> >  # Perform one step in kallsyms generation, including temporary linking of
> > --
> > 2.34.1
> >
>
>
> --
> Masami Hiramatsu (Google) <mhiramat@kernel.org>
  
Francis Laniel Oct. 2, 2023, 2:27 p.m. UTC | #3
Hi.

Le mercredi 27 septembre 2023, 20:35:16 EEST Alessandro Carminati (Red Hat) a 
écrit :
> It is not uncommon for drivers or modules related to similar peripherals
> to have symbols with the exact same name.
> While this is not a problem for the kernel's binary itself, it becomes an
> issue when attempting to trace or probe specific functions using
> infrastructure like ftrace or kprobe.
> 
> The tracing subsystem relies on the `nm -n vmlinux` output, which provides
> symbol information from the kernel's ELF binary. However, when multiple
> symbols share the same name, the standard nm output does not differentiate
> between them. This can lead to confusion and difficulty when trying to
> probe the intended symbol.
> 
>  ~ # cat /proc/kallsyms | grep " name_show"
>  ffffffff8c4f76d0 t name_show
>  ffffffff8c9cccb0 t name_show
>  ffffffff8cb0ac20 t name_show
>  ffffffff8cc728c0 t name_show
>  ffffffff8ce0efd0 t name_show
>  ffffffff8ce126c0 t name_show
>  ffffffff8ce1dd20 t name_show
>  ffffffff8ce24e70 t name_show
>  ffffffff8d1104c0 t name_show
>  ffffffff8d1fe480 t name_show
> 
> kas_alias addresses this challenge by enhancing symbol names with
> meaningful suffixes generated from the source file and line number
> during the kernel build process.
> These newly generated aliases provide tracers with the ability to
> comprehend the symbols they are interacting with when utilizing the
> ftracefs interface.
> This approach may also allow for the probing by name of previously
> inaccessible symbols.
> 
>  ~ # cat /proc/kallsyms | grep gic_mask_irq
>  ffffd15671e505ac t gic_mask_irq
>  ffffd15671e505ac t gic_mask_irq@drivers_irqchip_irq_gic_c_167
>  ffffd15671e532a4 t gic_mask_irq
>  ffffd15671e532a4 t gic_mask_irq@drivers_irqchip_irq_gic_v3_c_407
>  ~ #
> 
> Changes from v1:
> - Integrated changes requested by Masami to exclude symbols with prefixes
>   "_cfi" and "_pfx".
> - Introduced a small framework to handle patterns that need to be excluded
>   from the alias production.
> - Excluded other symbols using the framework.
> - Introduced the ability to discriminate between text and data symbols.
> - Added two new config symbols in this version: CONFIG_KALLSYMS_ALIAS_DATA,
>   which allows data for data, and CONFIG_KALLSYMS_ALIAS_DATA_ALL, which
>   excludes all filters and provides an alias for each duplicated symbol.
> 
> https://lore.kernel.org/all/20230711151925.1092080-1-alessandro.carminati@gm
> ail.com/
> 
> Changes from v2:
> - Alias tags are created by querying DWARF information from the vmlinux.
> - The filename + line number is normalized and appended to the original
>   name.
> - The tag begins with '@' to indicate the symbol source.
> - Not a change, but worth mentioning, since the alias is added to the
>   existing list, the old duplicated name is preserved, and the livepatch
>   way of dealing with duplicates is maintained.
> - Acknowledging the existence of scenarios where inlined functions
>   declared in header files may result in multiple copies due to compiler
>   behavior, though it is not actionable as it does not pose an operational
>   issue.
> - Highlighting a single exception where the same name refers to different
>   functions: the case of "compat_binfmt_elf.c," which directly includes
>   "binfmt_elf.c" producing identical function copies in two separate
>   modules.
> 
> https://lore.kernel.org/all/20230714150326.1152359-1-alessandro.carminati@gm
> ail.com/
> 
> Changes from v3:
> - kas_alias was rewritten in Python to create a more concise and
>   maintainable codebase.
> - The previous automation process used by kas_alias to locate the vmlinux
>   and the addr2line has been replaced with an explicit command-line switch
>   for specifying these requirements.
> - addr2line has been added into the main Makefile.
> - A new command-line switch has been introduced, enabling users to extend
>   the alias to global data names.
> 
> https://lore.kernel.org/all/20230828080423.3539686-1-alessandro.carminati@gm
> ail.com/
> 
> Changes from v4:
> - Fixed the O=<build dir> build issue
> - The tool halts execution upon encountering major issues, thereby ensuring
>   the pipeline is interrupted.
> - A cmdline option to specify the source directory added.
> - Minor code adjusments.
> - Tested on mips32 and i386

Thank you for sending this new version!
I only found nits and I think we are near its merge!

> https://lore.kernel.org/all/20230919193948.465340-1-alessandro.carminati@gma
> il.com/
> 
> NOTE:
> About the symbols name duplication that happens as consequence of the
> inclusion compat_binfmt_elf.c does, it is evident that this corner is
> inherently challenging the addr2line approach.
> Attempting to conceal this limitation would be counterproductive.
> 
> compat_binfmt_elf.c includes directly binfmt_elf.c, addr2line can't help
> but report all functions and data declared by that file, coming from
> binfmt_elf.c.
> 
> My position is that, rather than producing a more complicated pipeline
> to handle this corner case, it is better to fix the compat_binfmt_elf.c
> anomaly.
> 
> This patch does not deal with the two potentially problematic symbols
> defined by compat_binfmt_elf.c
> 
> Signed-off-by: Alessandro Carminati (Red Hat)
> <alessandro.carminati@gmail.com> ---
>  Makefile                |   4 +-
>  init/Kconfig            |  22 +++++++
>  scripts/kas_alias.py    | 136 ++++++++++++++++++++++++++++++++++++++++
>  scripts/link-vmlinux.sh |  21 ++++++-
>  4 files changed, 180 insertions(+), 3 deletions(-)
>  create mode 100755 scripts/kas_alias.py
> 
> diff --git a/Makefile b/Makefile
> index 4f283d915e54..f33c179f4cc3 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -488,6 +488,7 @@ OBJCOPY		= $(LLVM_PREFIX)llvm-objcopy$
(LLVM_SUFFIX)
>  OBJDUMP		= $(LLVM_PREFIX)llvm-objdump$(LLVM_SUFFIX)
>  READELF		= $(LLVM_PREFIX)llvm-readelf$(LLVM_SUFFIX)
>  STRIP		= $(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX)
> +ADDR2LINE	= $(LLVM_PREFIX)llvm-addr2line$(LLVM_SUFFIX)
>  else
>  CC		= $(CROSS_COMPILE)gcc
>  LD		= $(CROSS_COMPILE)ld
> @@ -497,6 +498,7 @@ OBJCOPY		= $(CROSS_COMPILE)objcopy
>  OBJDUMP		= $(CROSS_COMPILE)objdump
>  READELF		= $(CROSS_COMPILE)readelf
>  STRIP		= $(CROSS_COMPILE)strip
> +ADDR2LINE	= $(CROSS_COMPILE)addr2line
>  endif
>  RUSTC		= rustc
>  RUSTDOC		= rustdoc
> @@ -611,7 +613,7 @@ export RUSTC_BOOTSTRAP := 1
>  export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS
> CROSS_COMPILE LD CC HOSTPKG_CONFIG export RUSTC RUSTDOC RUSTFMT
> RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN CARGO export HOSTRUSTC
> KBUILD_HOSTRUSTFLAGS
> -export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX
> YACC AWK INSTALLKERNEL +export CPP AR NM STRIP OBJCOPY OBJDUMP READELF
> ADDR2LINE PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL export PERL
> PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
>  export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD
>  export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
> LDFLAGS_MODULE diff --git a/init/Kconfig b/init/Kconfig
> index 6d35728b94b2..d45dd423e1ec 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -1738,6 +1738,28 @@ config KALLSYMS_BASE_RELATIVE
>  	  time constants, and no relocation pass is required at runtime to fix
>  	  up the entries based on the runtime load address of the kernel.
> 
> +config KALLSYMS_ALIAS_SRCLINE
> +	bool "Produces alias for duplicated text symbols" if EXPERT
> +	depends on KALLSYMS && DEBUG_INFO && !DEBUG_INFO_SPLIT
> +	help
> +	  It is not uncommon for drivers or modules related to similar
> +	  peripherals to have symbols with the exact same name.
> +	  While this is not a problem for the kernel's binary itself, it
> +	  becomes an issue when attempting to trace or probe specific
> +	  functions using infrastructure like ftrace or kprobe.
> +
> +	  This option addresses this challenge, producing alias for text
> +	  symbol names that include the file name and line where the symbols
> +	  are defined in the source code.
> +
> +config KALLSYMS_ALIAS_SRCLINE_DATA
> +	bool "Produces alias also for global variables names"
> +	depends on KALLSYMS_ALIAS_SRCLINE
> +	help
> +	  Sometimes it can be useful to refer to global vars by name. Since
> +	  they suffer the same issue as text symbols, this config option
> +	  allows having aliases for global variables names too.
> +
>  # end of the "standard kernel features (expert users)" menu
> 
>  # syscall, maps, verifier
> diff --git a/scripts/kas_alias.py b/scripts/kas_alias.py
> new file mode 100755
> index 000000000000..7c6b7045081c
> --- /dev/null
> +++ b/scripts/kas_alias.py
> @@ -0,0 +1,136 @@
> +#!/usr/bin/env python3
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Copyright (C) 2023 Red Hat, Inc. Alessandro Carminati
> <alessandro.carminati@gmail.com> +#
> +# kas_alias: Adds alias to duplicate symbols in the kallsyms output.
> +
> +import subprocess
> +import sys
> +import os
> +import argparse
> +import re
> +from collections import namedtuple
> +
> +regex_filter = [
> +        "^__compound_literal\\.[0-9]+$",
> +        "^__[wm]*key\\.[0-9]+$",
> +        "^_*TRACE_SYSTEM.*$",
> +        "^__already_done\\.[0-9]+$",
> +        "^__msg\\.[0-9]+$",
> +        "^__func__\\.[0-9]+$",
> +        "^CSWTCH\\.[0-9]+$",
> +        "^_rs\\.[0-9]+$",
> +        "^___tp_str\\.[0-9]+$",
> +        "^__flags\\.[0-9]+$",
> +        "^___done\\.[0-9]+$",
> +        "^__print_once\\.[0-9]+$",
> +        "^___once_key\\.[0-9]+$",
> +        "^__pfx_.*$",
> +        "^__cfi_.*$"
> +        ]
> +
> +class SeparatorType:
> +    def __call__(self, separator):
> +        if len(separator) != 1:
> +            raise argparse.ArgumentTypeError("Separator must be a single
> character") +        return separator
> +
> +Line = namedtuple('Line', ['address', 'type', 'name'])
> +
> +def parse_file(filename):
> +    symbol_list = []
> +    name_occurrences = {}
> +
> +    with open(filename, 'r') as file:
> +        for line in file:
> +            fields = line.strip().split()
> +
> +            if len(fields) >= 3:
> +                address, type, name = fields[0], fields[1], '
> '.join(fields[2:]) +                symbol_list.append(Line(address, type,
> name))
> +                name_occurrences[name] = name_occurrences.get(name, 0) + 1
> +
> +    return symbol_list, name_occurrences
> +
> +def find_duplicate(symbol_list, name_occurrences):

This function is never used.

> +    name_to_lines = {}
> +    duplicate_lines = []
> +
> +    for line in symbol_list:
> +        if line.name in name_to_lines:
> +            first_occurrence = name_to_lines[line.name]
> +            duplicate_lines.extend([first_occurrence, line])
> +        else:
> +            name_to_lines[line.name] = line
> +
> +    return duplicate_lines
> +
> +def start_addr2line_process(binary_file, addr2line_file):
> +    try:
> +        addr2line_process = subprocess.Popen([addr2line_file, '-fe',
> binary_file], +                                            
> stdin=subprocess.PIPE, +                                            
> stdout=subprocess.PIPE, +                                            
> stderr=subprocess.PIPE, +                                            
> text=True)
> +        return addr2line_process
> +    except Exception as e:
> +        print(f"Error starting addr2line process: {str(e)}")
> +        sys.exit(1)

As you already have a try/except block code in your main function, I think it 
is better to handle all exception here rather than inside each function.

> +
> +def addr2line_fetch_address(addr2line_process, address):
> +    try:
> +        addr2line_process.stdin.write(address + '\n')
> +        addr2line_process.stdin.flush()
> +        addr2line_process.stdout.readline().strip()
> +        output = addr2line_process.stdout.readline().strip()
> +
> +        return os.path.normpath(output)
> +    except Exception as e:
> +        print(f"Error communicating with addr2line: {str(e)}")
> +        sys.exit(1)

Same comment as above.

> +def process_line(obj, config):
> +    if config:
> +        return not (any(re.match(regex, obj.name) for regex in
> regex_filter)) +    else:
> +        return obj.type in {"T", "t"}
> +
> +if __name__ == "__main__":
> +    parser = argparse.ArgumentParser(description='Add alias to multiple
> occurring symbols name in kallsyms') +    parser.add_argument('-a',
> "--addr2line", dest="addr2line_file", required=True) +   
> parser.add_argument('-v', "--vmlinux", dest="vmlinux_file", required=True)
> +    parser.add_argument('-o', "--outfile", dest="output_file",
> required=True) +    parser.add_argument('-n', "--nmdata",
> dest="nm_data_file", required=True) +    parser.add_argument('-b',
> "--basedir", dest="linux_base_dir", required=True) +   
> parser.add_argument('-s', "--separator", dest="separator", required=False,
> default="@", type=SeparatorType()) +    parser.add_argument('-d', "--data",
> dest="include_data", required=False, action='store_true') +    config =
> parser.parse_args()
> +
> +    try:
> +        config.linux_base_dir = os.path.normpath(os.getcwd() + "/" +
> config.linux_base_dir) + "/" +        symbol_list, name_occurrences =
> parse_file(config.nm_data_file) +        addr2line_process =
> start_addr2line_process(config.vmlinux_file, config.addr2line_file) +
> +        with open(config.output_file, 'w') as file:
> +            for obj in symbol_list:
> +                file.write(f"{obj.address} {obj.type} {obj.name}\n")
> +                if (name_occurrences[obj.name] > 1) and process_line(obj,
> config.include_data) : +                    output =
> addr2line_fetch_address(addr2line_process, obj.address) +                  
>  decoration = config.separator + "".join(
> +                        "_" if not c.isalnum() else c for c in
> output.replace(config.linux_base_dir, "") +                    )
> +                    # The addr2line can emit the special string "?:??" when
> addr2line can not find the +                    # specified address in the
> DWARF section that after normalization it becomes "____". +                
>    # In such cases, emitting an alias wouldn't make sense, so it is
> skipped. 

Thank you for the comment!

> +                    if decoration != config.separator + "____":
> +                        file.write(f"{obj.address} {obj.type} {obj.name +
> decoration}\n") +
> +        addr2line_process.stdin.close()
> +        addr2line_process.stdout.close()
> +        addr2line_process.stderr.close()
> +        addr2line_process.wait()
> +
> +    except Exception as e:
> +        print(f"An error occurred: {str(e)}")
> +        raise SystemExit("Script terminated due to an error")
> diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
> index a432b171be82..c110b0f58a19 100755
> --- a/scripts/link-vmlinux.sh
> +++ b/scripts/link-vmlinux.sh
> @@ -91,7 +91,12 @@ vmlinux_link()
> 
>  	# The kallsyms linking does not need debug symbols included.
>  	if [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
> -		ldflags="${ldflags} ${wl}--strip-debug"
> +		# The kallsyms linking does not need debug symbols included,
> +		# unless the KALLSYMS_ALIAS_SRCLINE.
> +		if ! is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE && \
> +		   [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
> +			ldflags="${ldflags} ${wl}--strip-debug"
> +		fi
>  	fi
> 
>  	if is_enabled CONFIG_VMLINUX_MAP; then
> @@ -161,7 +166,19 @@ kallsyms()
>  	fi
> 
>  	info KSYMS ${2}
> -	scripts/kallsyms ${kallsymopt} ${1} > ${2}
> +	ALIAS=""
> +	KAS_DATA=""
> +	if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE_DATA; then
> +		KAS_DATA="--data"
> +	fi
> +	if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE; then
> +		ALIAS=".alias"
> +		${srctree}/scripts/kas_alias.py \
> +			--addr2line ${ADDR2LINE} --vmlinux ${kallsyms_vmlinux} \
> +			--nmdata ${1} --outfile ${1}${ALIAS} \
> +			--basedir ${srctree} --separator @ ${KAS_DATA}
> +	fi
> +	scripts/kallsyms ${kallsymopt} ${1}${ALIAS} > ${2}
>  }
> 
>  # Perform one step in kallsyms generation, including temporary linking of

Best regards.
  
Kris Van Hees Oct. 5, 2023, 4:24 p.m. UTC | #4
On Wed, Sep 27, 2023 at 05:35:16PM +0000, Alessandro Carminati (Red Hat) wrote:
> It is not uncommon for drivers or modules related to similar peripherals
> to have symbols with the exact same name.
> While this is not a problem for the kernel's binary itself, it becomes an
> issue when attempting to trace or probe specific functions using
> infrastructure like ftrace or kprobe.
> 
> The tracing subsystem relies on the `nm -n vmlinux` output, which provides
> symbol information from the kernel's ELF binary. However, when multiple
> symbols share the same name, the standard nm output does not differentiate
> between them. This can lead to confusion and difficulty when trying to
> probe the intended symbol.
> 
>  ~ # cat /proc/kallsyms | grep " name_show"
>  ffffffff8c4f76d0 t name_show
>  ffffffff8c9cccb0 t name_show
>  ffffffff8cb0ac20 t name_show
>  ffffffff8cc728c0 t name_show
>  ffffffff8ce0efd0 t name_show
>  ffffffff8ce126c0 t name_show
>  ffffffff8ce1dd20 t name_show
>  ffffffff8ce24e70 t name_show
>  ffffffff8d1104c0 t name_show
>  ffffffff8d1fe480 t name_show

One problem that remains as far as I can see is that this approach does not
take into consideration that there can be duplicate symbols in the core
kernel, but also between core kernel and loadable modules, and even between
loadable modules.  So, I think more is needed to also ensure that this
approach of adding alias symbols is also done for loadable modules.

Earlier work that cover all symbols (core kernel and loadable modules) was
posted quite a while ago by Nick Alcock:

https://lore.kernel.org/all/20221205163157.269335-1-nick.alcock@oracle.com/

It takes a different approach and adds in other info that is very useful for
tracing, but unfortunately it has been dormant for a long time now.

While module symbols are handled quite differently (for kallsyms) from the
core kernel symbols, I think that a similar approach tied in with modpost
ought to be quite possible.  It will add to the size of modules because the
data needs to be stored in the .ko but that is unavoidable.  But not doing it
unfortunately would mean that the duplicate symbol issue remains unresolved
in the presence of loadable modules.

> kas_alias addresses this challenge by enhancing symbol names with
> meaningful suffixes generated from the source file and line number
> during the kernel build process.
> These newly generated aliases provide tracers with the ability to
> comprehend the symbols they are interacting with when utilizing the
> ftracefs interface.
> This approach may also allow for the probing by name of previously
> inaccessible symbols.
> 
>  ~ # cat /proc/kallsyms | grep gic_mask_irq
>  ffffd15671e505ac t gic_mask_irq
>  ffffd15671e505ac t gic_mask_irq@drivers_irqchip_irq_gic_c_167
>  ffffd15671e532a4 t gic_mask_irq
>  ffffd15671e532a4 t gic_mask_irq@drivers_irqchip_irq_gic_v3_c_407
>  ~ #

In the same context as mentioned above (module symbols), I am hoping that the
alias you generate might also be able to contain a module identifier name,
much like the aforementioned patch series by Nick Alcock added.  We have it
for loadable modules already of course, but as has been discussed in relation
to the earlier work, being able to associate a module name with a symbol
regardless of whether that module is configured to be built into the kernel
or whether it is configured to be a loadable module is helpful for tracing
purposes.  Especially for tracers that use tracing scripts that might get
deployed on diverse systems where it cannot always be known at the time of
developing the tracer scripts whether a kernel module is configured to be
loadable or built-in.

I'd be happy to work on something like this as a contribution to your work.
I would envision the alias entry not needing to have the typical [module] added
to it because that will already be annotated on the actual symbol entry.  So,
the alias could be extended to be something like:

ffffffffc0533720 t floppy_open  [floppy]
ffffffffc0533720 t floppy_open@floppy:drivers_block_floppy_c_3988

(absence of a name: prefix to the path would indicate the symbol is not
 associated with any module)

Doing this is more realistic now as a result of the clean-up patches that
Nick introduced, e.g.

https://lore.kernel.org/lkml/20230302211759.30135-1-nick.alcock@oracle.com/

> Changes from v1:
> - Integrated changes requested by Masami to exclude symbols with prefixes
>   "_cfi" and "_pfx".
> - Introduced a small framework to handle patterns that need to be excluded
>   from the alias production.
> - Excluded other symbols using the framework.
> - Introduced the ability to discriminate between text and data symbols.
> - Added two new config symbols in this version: CONFIG_KALLSYMS_ALIAS_DATA,
>   which allows data for data, and CONFIG_KALLSYMS_ALIAS_DATA_ALL, which
>   excludes all filters and provides an alias for each duplicated symbol.
> 
> https://lore.kernel.org/all/20230711151925.1092080-1-alessandro.carminati@gmail.com/
> 
> Changes from v2:
> - Alias tags are created by querying DWARF information from the vmlinux.
> - The filename + line number is normalized and appended to the original
>   name.
> - The tag begins with '@' to indicate the symbol source.
> - Not a change, but worth mentioning, since the alias is added to the
>   existing list, the old duplicated name is preserved, and the livepatch
>   way of dealing with duplicates is maintained.
> - Acknowledging the existence of scenarios where inlined functions
>   declared in header files may result in multiple copies due to compiler
>   behavior, though it is not actionable as it does not pose an operational
>   issue.
> - Highlighting a single exception where the same name refers to different
>   functions: the case of "compat_binfmt_elf.c," which directly includes
>   "binfmt_elf.c" producing identical function copies in two separate
>   modules.
> 
> https://lore.kernel.org/all/20230714150326.1152359-1-alessandro.carminati@gmail.com/
> 
> Changes from v3:
> - kas_alias was rewritten in Python to create a more concise and
>   maintainable codebase.
> - The previous automation process used by kas_alias to locate the vmlinux
>   and the addr2line has been replaced with an explicit command-line switch
>   for specifying these requirements.
> - addr2line has been added into the main Makefile.
> - A new command-line switch has been introduced, enabling users to extend
>   the alias to global data names.
> 
> https://lore.kernel.org/all/20230828080423.3539686-1-alessandro.carminati@gmail.com/
> 
> Changes from v4:
> - Fixed the O=<build dir> build issue
> - The tool halts execution upon encountering major issues, thereby ensuring
>   the pipeline is interrupted.
> - A cmdline option to specify the source directory added.
> - Minor code adjusments.
> - Tested on mips32 and i386
> 
> https://lore.kernel.org/all/20230919193948.465340-1-alessandro.carminati@gmail.com/
> 
> NOTE:
> About the symbols name duplication that happens as consequence of the
> inclusion compat_binfmt_elf.c does, it is evident that this corner is
> inherently challenging the addr2line approach.
> Attempting to conceal this limitation would be counterproductive.
> 
> compat_binfmt_elf.c includes directly binfmt_elf.c, addr2line can't help
> but report all functions and data declared by that file, coming from
> binfmt_elf.c.
> 
> My position is that, rather than producing a more complicated pipeline
> to handle this corner case, it is better to fix the compat_binfmt_elf.c
> anomaly.
> 
> This patch does not deal with the two potentially problematic symbols
> defined by compat_binfmt_elf.c
> 
> Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
> ---
>  Makefile                |   4 +-
>  init/Kconfig            |  22 +++++++
>  scripts/kas_alias.py    | 136 ++++++++++++++++++++++++++++++++++++++++
>  scripts/link-vmlinux.sh |  21 ++++++-
>  4 files changed, 180 insertions(+), 3 deletions(-)
>  create mode 100755 scripts/kas_alias.py
> 
> diff --git a/Makefile b/Makefile
> index 4f283d915e54..f33c179f4cc3 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -488,6 +488,7 @@ OBJCOPY		= $(LLVM_PREFIX)llvm-objcopy$(LLVM_SUFFIX)
>  OBJDUMP		= $(LLVM_PREFIX)llvm-objdump$(LLVM_SUFFIX)
>  READELF		= $(LLVM_PREFIX)llvm-readelf$(LLVM_SUFFIX)
>  STRIP		= $(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX)
> +ADDR2LINE	= $(LLVM_PREFIX)llvm-addr2line$(LLVM_SUFFIX)
>  else
>  CC		= $(CROSS_COMPILE)gcc
>  LD		= $(CROSS_COMPILE)ld
> @@ -497,6 +498,7 @@ OBJCOPY		= $(CROSS_COMPILE)objcopy
>  OBJDUMP		= $(CROSS_COMPILE)objdump
>  READELF		= $(CROSS_COMPILE)readelf
>  STRIP		= $(CROSS_COMPILE)strip
> +ADDR2LINE	= $(CROSS_COMPILE)addr2line
>  endif
>  RUSTC		= rustc
>  RUSTDOC		= rustdoc
> @@ -611,7 +613,7 @@ export RUSTC_BOOTSTRAP := 1
>  export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG
>  export RUSTC RUSTDOC RUSTFMT RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN CARGO
>  export HOSTRUSTC KBUILD_HOSTRUSTFLAGS
> -export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
> +export CPP AR NM STRIP OBJCOPY OBJDUMP READELF ADDR2LINE PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
>  export PERL PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
>  export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD
>  export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
> diff --git a/init/Kconfig b/init/Kconfig
> index 6d35728b94b2..d45dd423e1ec 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -1738,6 +1738,28 @@ config KALLSYMS_BASE_RELATIVE
>  	  time constants, and no relocation pass is required at runtime to fix
>  	  up the entries based on the runtime load address of the kernel.
>  
> +config KALLSYMS_ALIAS_SRCLINE
> +	bool "Produces alias for duplicated text symbols" if EXPERT
> +	depends on KALLSYMS && DEBUG_INFO && !DEBUG_INFO_SPLIT
> +	help
> +	  It is not uncommon for drivers or modules related to similar
> +	  peripherals to have symbols with the exact same name.
> +	  While this is not a problem for the kernel's binary itself, it
> +	  becomes an issue when attempting to trace or probe specific
> +	  functions using infrastructure like ftrace or kprobe.
> +
> +	  This option addresses this challenge, producing alias for text
> +	  symbol names that include the file name and line where the symbols
> +	  are defined in the source code.
> +
> +config KALLSYMS_ALIAS_SRCLINE_DATA
> +	bool "Produces alias also for global variables names"
> +	depends on KALLSYMS_ALIAS_SRCLINE
> +	help
> +	  Sometimes it can be useful to refer to global vars by name. Since
> +	  they suffer the same issue as text symbols, this config option
> +	  allows having aliases for global variables names too.
> +
>  # end of the "standard kernel features (expert users)" menu
>  
>  # syscall, maps, verifier
> diff --git a/scripts/kas_alias.py b/scripts/kas_alias.py
> new file mode 100755
> index 000000000000..7c6b7045081c
> --- /dev/null
> +++ b/scripts/kas_alias.py
> @@ -0,0 +1,136 @@
> +#!/usr/bin/env python3
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Copyright (C) 2023 Red Hat, Inc. Alessandro Carminati <alessandro.carminati@gmail.com>
> +#
> +# kas_alias: Adds alias to duplicate symbols in the kallsyms output.
> +
> +import subprocess
> +import sys
> +import os
> +import argparse
> +import re
> +from collections import namedtuple
> +
> +regex_filter = [
> +        "^__compound_literal\\.[0-9]+$",
> +        "^__[wm]*key\\.[0-9]+$",
> +        "^_*TRACE_SYSTEM.*$",
> +        "^__already_done\\.[0-9]+$",
> +        "^__msg\\.[0-9]+$",
> +        "^__func__\\.[0-9]+$",
> +        "^CSWTCH\\.[0-9]+$",
> +        "^_rs\\.[0-9]+$",
> +        "^___tp_str\\.[0-9]+$",
> +        "^__flags\\.[0-9]+$",
> +        "^___done\\.[0-9]+$",
> +        "^__print_once\\.[0-9]+$",
> +        "^___once_key\\.[0-9]+$",
> +        "^__pfx_.*$",
> +        "^__cfi_.*$"
> +        ]
> +
> +class SeparatorType:
> +    def __call__(self, separator):
> +        if len(separator) != 1:
> +            raise argparse.ArgumentTypeError("Separator must be a single character")
> +        return separator
> +
> +Line = namedtuple('Line', ['address', 'type', 'name'])
> +
> +def parse_file(filename):
> +    symbol_list = []
> +    name_occurrences = {}
> +
> +    with open(filename, 'r') as file:
> +        for line in file:
> +            fields = line.strip().split()
> +
> +            if len(fields) >= 3:
> +                address, type, name = fields[0], fields[1], ' '.join(fields[2:])
> +                symbol_list.append(Line(address, type, name))
> +                name_occurrences[name] = name_occurrences.get(name, 0) + 1
> +
> +    return symbol_list, name_occurrences
> +
> +def find_duplicate(symbol_list, name_occurrences):
> +    name_to_lines = {}
> +    duplicate_lines = []
> +
> +    for line in symbol_list:
> +        if line.name in name_to_lines:
> +            first_occurrence = name_to_lines[line.name]
> +            duplicate_lines.extend([first_occurrence, line])
> +        else:
> +            name_to_lines[line.name] = line
> +
> +    return duplicate_lines
> +
> +def start_addr2line_process(binary_file, addr2line_file):
> +    try:
> +        addr2line_process = subprocess.Popen([addr2line_file, '-fe', binary_file],
> +                                             stdin=subprocess.PIPE,
> +                                             stdout=subprocess.PIPE,
> +                                             stderr=subprocess.PIPE,
> +                                             text=True)
> +        return addr2line_process
> +    except Exception as e:
> +        print(f"Error starting addr2line process: {str(e)}")
> +        sys.exit(1)
> +
> +def addr2line_fetch_address(addr2line_process, address):
> +    try:
> +        addr2line_process.stdin.write(address + '\n')
> +        addr2line_process.stdin.flush()
> +        addr2line_process.stdout.readline().strip()
> +        output = addr2line_process.stdout.readline().strip()
> +
> +        return os.path.normpath(output)
> +    except Exception as e:
> +        print(f"Error communicating with addr2line: {str(e)}")
> +        sys.exit(1)
> +
> +def process_line(obj, config):
> +    if config:
> +        return not (any(re.match(regex, obj.name) for regex in regex_filter))
> +    else:
> +        return obj.type in {"T", "t"}
> +
> +if __name__ == "__main__":
> +    parser = argparse.ArgumentParser(description='Add alias to multiple occurring symbols name in kallsyms')
> +    parser.add_argument('-a', "--addr2line", dest="addr2line_file", required=True)
> +    parser.add_argument('-v', "--vmlinux", dest="vmlinux_file", required=True)
> +    parser.add_argument('-o', "--outfile", dest="output_file", required=True)
> +    parser.add_argument('-n', "--nmdata", dest="nm_data_file", required=True)
> +    parser.add_argument('-b', "--basedir", dest="linux_base_dir", required=True)
> +    parser.add_argument('-s', "--separator", dest="separator", required=False, default="@", type=SeparatorType())
> +    parser.add_argument('-d', "--data", dest="include_data", required=False, action='store_true')
> +    config = parser.parse_args()
> +
> +    try:
> +        config.linux_base_dir = os.path.normpath(os.getcwd() + "/" + config.linux_base_dir) + "/"

This logic normalization fails when you are building the kernel in a directory
that is symbolically linked to another fs.  E.g. I have:

	/home/kvanhees/linux-stable

which is a symbolic link to

	/local/linux-stable	

Since /local is its own fs, the above normalization expression renders the
passed-in basedir "." to be /local/linux-stable, but addr2line is reporting
filenames under /home/kvanhees/linux-stable

> +        symbol_list, name_occurrences = parse_file(config.nm_data_file)
> +        addr2line_process = start_addr2line_process(config.vmlinux_file, config.addr2line_file)
> +
> +        with open(config.output_file, 'w') as file:
> +            for obj in symbol_list:
> +                file.write(f"{obj.address} {obj.type} {obj.name}\n")
> +                if (name_occurrences[obj.name] > 1) and process_line(obj, config.include_data) :
> +                    output = addr2line_fetch_address(addr2line_process, obj.address)
> +                    decoration = config.separator + "".join(
> +                        "_" if not c.isalnum() else c for c in output.replace(config.linux_base_dir, "")
> +                    )
> +                    # The addr2line can emit the special string "?:??" when addr2line can not find the
> +                    # specified address in the DWARF section that after normalization it becomes "____".
> +                    # In such cases, emitting an alias wouldn't make sense, so it is skipped.
> +                    if decoration != config.separator + "____":
> +                        file.write(f"{obj.address} {obj.type} {obj.name + decoration}\n")
> +
> +        addr2line_process.stdin.close()
> +        addr2line_process.stdout.close()
> +        addr2line_process.stderr.close()
> +        addr2line_process.wait()
> +
> +    except Exception as e:
> +        print(f"An error occurred: {str(e)}")
> +        raise SystemExit("Script terminated due to an error")
> diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
> index a432b171be82..c110b0f58a19 100755
> --- a/scripts/link-vmlinux.sh
> +++ b/scripts/link-vmlinux.sh
> @@ -91,7 +91,12 @@ vmlinux_link()
>  
>  	# The kallsyms linking does not need debug symbols included.
>  	if [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
> -		ldflags="${ldflags} ${wl}--strip-debug"
> +		# The kallsyms linking does not need debug symbols included,
> +		# unless the KALLSYMS_ALIAS_SRCLINE.
> +		if ! is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE && \
> +		   [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
> +			ldflags="${ldflags} ${wl}--strip-debug"
> +		fi
>  	fi
>  
>  	if is_enabled CONFIG_VMLINUX_MAP; then
> @@ -161,7 +166,19 @@ kallsyms()
>  	fi
>  
>  	info KSYMS ${2}
> -	scripts/kallsyms ${kallsymopt} ${1} > ${2}
> +	ALIAS=""
> +	KAS_DATA=""
> +	if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE_DATA; then
> +		KAS_DATA="--data"
> +	fi
> +	if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE; then
> +		ALIAS=".alias"
> +		${srctree}/scripts/kas_alias.py \
> +			--addr2line ${ADDR2LINE} --vmlinux ${kallsyms_vmlinux} \
> +			--nmdata ${1} --outfile ${1}${ALIAS} \
> +			--basedir ${srctree} --separator @ ${KAS_DATA}
> +	fi
> +	scripts/kallsyms ${kallsymopt} ${1}${ALIAS} > ${2}
>  }
>  
>  # Perform one step in kallsyms generation, including temporary linking of
> -- 
> 2.34.1
  
Kris Van Hees Oct. 6, 2023, 3:11 a.m. UTC | #5
On Thu, Oct 05, 2023 at 12:24:03PM -0400, Kris Van Hees wrote:
> On Wed, Sep 27, 2023 at 05:35:16PM +0000, Alessandro Carminati (Red Hat) wrote:
> > It is not uncommon for drivers or modules related to similar peripherals
> > to have symbols with the exact same name.
> > While this is not a problem for the kernel's binary itself, it becomes an
> > issue when attempting to trace or probe specific functions using
> > infrastructure like ftrace or kprobe.
> > 
> > The tracing subsystem relies on the `nm -n vmlinux` output, which provides
> > symbol information from the kernel's ELF binary. However, when multiple
> > symbols share the same name, the standard nm output does not differentiate
> > between them. This can lead to confusion and difficulty when trying to
> > probe the intended symbol.
> > 
> >  ~ # cat /proc/kallsyms | grep " name_show"
> >  ffffffff8c4f76d0 t name_show
> >  ffffffff8c9cccb0 t name_show
> >  ffffffff8cb0ac20 t name_show
> >  ffffffff8cc728c0 t name_show
> >  ffffffff8ce0efd0 t name_show
> >  ffffffff8ce126c0 t name_show
> >  ffffffff8ce1dd20 t name_show
> >  ffffffff8ce24e70 t name_show
> >  ffffffff8d1104c0 t name_show
> >  ffffffff8d1fe480 t name_show
> 
> One problem that remains as far as I can see is that this approach does not
> take into consideration that there can be duplicate symbols in the core
> kernel, but also between core kernel and loadable modules, and even between
> loadable modules.  So, I think more is needed to also ensure that this
> approach of adding alias symbols is also done for loadable modules.

Re-reading my email a bit more, I realize that I did not accurate demonstrate
the issue I arefer to.  Obviously, the current patch provides aliases for
duplicate symbols in the core kernel.  And loadable modules are annotated with
the module name.  So, all is well unless modules have duplicate symbols
themselves.  And although it is rare, it does happen:

# grep ' metadata_show' /proc/kallsyms 
ffffffffc05659c0 t metadata_show        [md_mod]
ffffffffc05739f0 t metadata_show        [md_mod]

This again shows a case where there are duplicate symbols that cannot be
distinguished for tracing purposes without additional information.  So, the
proposed patch unfortunately does not cover all cases because of loadable
modules.

> Earlier work that cover all symbols (core kernel and loadable modules) was
> posted quite a while ago by Nick Alcock:
> 
> https://lore.kernel.org/all/20221205163157.269335-1-nick.alcock@oracle.com/
> 
> It takes a different approach and adds in other info that is very useful for
> tracing, but unfortunately it has been dormant for a long time now.
> 
> While module symbols are handled quite differently (for kallsyms) from the
> core kernel symbols, I think that a similar approach tied in with modpost
> ought to be quite possible.  It will add to the size of modules because the
> data needs to be stored in the .ko but that is unavoidable.  But not doing it
> unfortunately would mean that the duplicate symbol issue remains unresolved
> in the presence of loadable modules.
> 
> > kas_alias addresses this challenge by enhancing symbol names with
> > meaningful suffixes generated from the source file and line number
> > during the kernel build process.
> > These newly generated aliases provide tracers with the ability to
> > comprehend the symbols they are interacting with when utilizing the
> > ftracefs interface.
> > This approach may also allow for the probing by name of previously
> > inaccessible symbols.
> > 
> >  ~ # cat /proc/kallsyms | grep gic_mask_irq
> >  ffffd15671e505ac t gic_mask_irq
> >  ffffd15671e505ac t gic_mask_irq@drivers_irqchip_irq_gic_c_167
> >  ffffd15671e532a4 t gic_mask_irq
> >  ffffd15671e532a4 t gic_mask_irq@drivers_irqchip_irq_gic_v3_c_407
> >  ~ #
> 
> In the same context as mentioned above (module symbols), I am hoping that the
> alias you generate might also be able to contain a module identifier name,
> much like the aforementioned patch series by Nick Alcock added.  We have it
> for loadable modules already of course, but as has been discussed in relation
> to the earlier work, being able to associate a module name with a symbol
> regardless of whether that module is configured to be built into the kernel
> or whether it is configured to be a loadable module is helpful for tracing
> purposes.  Especially for tracers that use tracing scripts that might get
> deployed on diverse systems where it cannot always be known at the time of
> developing the tracer scripts whether a kernel module is configured to be
> loadable or built-in.
> 
> I'd be happy to work on something like this as a contribution to your work.
> I would envision the alias entry not needing to have the typical [module] added
> to it because that will already be annotated on the actual symbol entry.  So,
> the alias could be extended to be something like:
> 
> ffffffffc0533720 t floppy_open  [floppy]
> ffffffffc0533720 t floppy_open@floppy:drivers_block_floppy_c_3988
> 
> (absence of a name: prefix to the path would indicate the symbol is not
>  associated with any module)
> 
> Doing this is more realistic now as a result of the clean-up patches that
> Nick introduced, e.g.
> 
> https://lore.kernel.org/lkml/20230302211759.30135-1-nick.alcock@oracle.com/

Reflecting on this a bit more, I think that there might be a much easier (yet
sufficient) solution to providing module name distinction for builtin modules.
Since only duplicate symbols get aliases with the current patch, that would
not be sufficient to identify symbols as belonging to a (conceptual) module
i.e. a module that could have been configured to be loadable but instead is
compiled in).  You would need to add an alias for *all* symbols that are part
of such conceptual modules, which I expect would be considered to be a bit
excessive for the moderate benefit.

I am working on an alternative solution that won't bloat the kernel with
extra aliases and yet should be sufficient to provide module name information
so tracers can use it.

> > Changes from v1:
> > - Integrated changes requested by Masami to exclude symbols with prefixes
> >   "_cfi" and "_pfx".
> > - Introduced a small framework to handle patterns that need to be excluded
> >   from the alias production.
> > - Excluded other symbols using the framework.
> > - Introduced the ability to discriminate between text and data symbols.
> > - Added two new config symbols in this version: CONFIG_KALLSYMS_ALIAS_DATA,
> >   which allows data for data, and CONFIG_KALLSYMS_ALIAS_DATA_ALL, which
> >   excludes all filters and provides an alias for each duplicated symbol.
> > 
> > https://lore.kernel.org/all/20230711151925.1092080-1-alessandro.carminati@gmail.com/
> > 
> > Changes from v2:
> > - Alias tags are created by querying DWARF information from the vmlinux.
> > - The filename + line number is normalized and appended to the original
> >   name.
> > - The tag begins with '@' to indicate the symbol source.
> > - Not a change, but worth mentioning, since the alias is added to the
> >   existing list, the old duplicated name is preserved, and the livepatch
> >   way of dealing with duplicates is maintained.
> > - Acknowledging the existence of scenarios where inlined functions
> >   declared in header files may result in multiple copies due to compiler
> >   behavior, though it is not actionable as it does not pose an operational
> >   issue.
> > - Highlighting a single exception where the same name refers to different
> >   functions: the case of "compat_binfmt_elf.c," which directly includes
> >   "binfmt_elf.c" producing identical function copies in two separate
> >   modules.
> > 
> > https://lore.kernel.org/all/20230714150326.1152359-1-alessandro.carminati@gmail.com/
> > 
> > Changes from v3:
> > - kas_alias was rewritten in Python to create a more concise and
> >   maintainable codebase.
> > - The previous automation process used by kas_alias to locate the vmlinux
> >   and the addr2line has been replaced with an explicit command-line switch
> >   for specifying these requirements.
> > - addr2line has been added into the main Makefile.
> > - A new command-line switch has been introduced, enabling users to extend
> >   the alias to global data names.
> > 
> > https://lore.kernel.org/all/20230828080423.3539686-1-alessandro.carminati@gmail.com/
> > 
> > Changes from v4:
> > - Fixed the O=<build dir> build issue
> > - The tool halts execution upon encountering major issues, thereby ensuring
> >   the pipeline is interrupted.
> > - A cmdline option to specify the source directory added.
> > - Minor code adjusments.
> > - Tested on mips32 and i386
> > 
> > https://lore.kernel.org/all/20230919193948.465340-1-alessandro.carminati@gmail.com/
> > 
> > NOTE:
> > About the symbols name duplication that happens as consequence of the
> > inclusion compat_binfmt_elf.c does, it is evident that this corner is
> > inherently challenging the addr2line approach.
> > Attempting to conceal this limitation would be counterproductive.
> > 
> > compat_binfmt_elf.c includes directly binfmt_elf.c, addr2line can't help
> > but report all functions and data declared by that file, coming from
> > binfmt_elf.c.
> > 
> > My position is that, rather than producing a more complicated pipeline
> > to handle this corner case, it is better to fix the compat_binfmt_elf.c
> > anomaly.
> > 
> > This patch does not deal with the two potentially problematic symbols
> > defined by compat_binfmt_elf.c
> > 
> > Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
> > ---
> >  Makefile                |   4 +-
> >  init/Kconfig            |  22 +++++++
> >  scripts/kas_alias.py    | 136 ++++++++++++++++++++++++++++++++++++++++
> >  scripts/link-vmlinux.sh |  21 ++++++-
> >  4 files changed, 180 insertions(+), 3 deletions(-)
> >  create mode 100755 scripts/kas_alias.py
> > 
> > diff --git a/Makefile b/Makefile
> > index 4f283d915e54..f33c179f4cc3 100644
> > --- a/Makefile
> > +++ b/Makefile
> > @@ -488,6 +488,7 @@ OBJCOPY		= $(LLVM_PREFIX)llvm-objcopy$(LLVM_SUFFIX)
> >  OBJDUMP		= $(LLVM_PREFIX)llvm-objdump$(LLVM_SUFFIX)
> >  READELF		= $(LLVM_PREFIX)llvm-readelf$(LLVM_SUFFIX)
> >  STRIP		= $(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX)
> > +ADDR2LINE	= $(LLVM_PREFIX)llvm-addr2line$(LLVM_SUFFIX)
> >  else
> >  CC		= $(CROSS_COMPILE)gcc
> >  LD		= $(CROSS_COMPILE)ld
> > @@ -497,6 +498,7 @@ OBJCOPY		= $(CROSS_COMPILE)objcopy
> >  OBJDUMP		= $(CROSS_COMPILE)objdump
> >  READELF		= $(CROSS_COMPILE)readelf
> >  STRIP		= $(CROSS_COMPILE)strip
> > +ADDR2LINE	= $(CROSS_COMPILE)addr2line
> >  endif
> >  RUSTC		= rustc
> >  RUSTDOC		= rustdoc
> > @@ -611,7 +613,7 @@ export RUSTC_BOOTSTRAP := 1
> >  export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG
> >  export RUSTC RUSTDOC RUSTFMT RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN CARGO
> >  export HOSTRUSTC KBUILD_HOSTRUSTFLAGS
> > -export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
> > +export CPP AR NM STRIP OBJCOPY OBJDUMP READELF ADDR2LINE PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
> >  export PERL PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
> >  export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD
> >  export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
> > diff --git a/init/Kconfig b/init/Kconfig
> > index 6d35728b94b2..d45dd423e1ec 100644
> > --- a/init/Kconfig
> > +++ b/init/Kconfig
> > @@ -1738,6 +1738,28 @@ config KALLSYMS_BASE_RELATIVE
> >  	  time constants, and no relocation pass is required at runtime to fix
> >  	  up the entries based on the runtime load address of the kernel.
> >  
> > +config KALLSYMS_ALIAS_SRCLINE
> > +	bool "Produces alias for duplicated text symbols" if EXPERT
> > +	depends on KALLSYMS && DEBUG_INFO && !DEBUG_INFO_SPLIT
> > +	help
> > +	  It is not uncommon for drivers or modules related to similar
> > +	  peripherals to have symbols with the exact same name.
> > +	  While this is not a problem for the kernel's binary itself, it
> > +	  becomes an issue when attempting to trace or probe specific
> > +	  functions using infrastructure like ftrace or kprobe.
> > +
> > +	  This option addresses this challenge, producing alias for text
> > +	  symbol names that include the file name and line where the symbols
> > +	  are defined in the source code.
> > +
> > +config KALLSYMS_ALIAS_SRCLINE_DATA
> > +	bool "Produces alias also for global variables names"
> > +	depends on KALLSYMS_ALIAS_SRCLINE
> > +	help
> > +	  Sometimes it can be useful to refer to global vars by name. Since
> > +	  they suffer the same issue as text symbols, this config option
> > +	  allows having aliases for global variables names too.
> > +
> >  # end of the "standard kernel features (expert users)" menu
> >  
> >  # syscall, maps, verifier
> > diff --git a/scripts/kas_alias.py b/scripts/kas_alias.py
> > new file mode 100755
> > index 000000000000..7c6b7045081c
> > --- /dev/null
> > +++ b/scripts/kas_alias.py
> > @@ -0,0 +1,136 @@
> > +#!/usr/bin/env python3
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +#
> > +# Copyright (C) 2023 Red Hat, Inc. Alessandro Carminati <alessandro.carminati@gmail.com>
> > +#
> > +# kas_alias: Adds alias to duplicate symbols in the kallsyms output.
> > +
> > +import subprocess
> > +import sys
> > +import os
> > +import argparse
> > +import re
> > +from collections import namedtuple
> > +
> > +regex_filter = [
> > +        "^__compound_literal\\.[0-9]+$",
> > +        "^__[wm]*key\\.[0-9]+$",
> > +        "^_*TRACE_SYSTEM.*$",
> > +        "^__already_done\\.[0-9]+$",
> > +        "^__msg\\.[0-9]+$",
> > +        "^__func__\\.[0-9]+$",
> > +        "^CSWTCH\\.[0-9]+$",
> > +        "^_rs\\.[0-9]+$",
> > +        "^___tp_str\\.[0-9]+$",
> > +        "^__flags\\.[0-9]+$",
> > +        "^___done\\.[0-9]+$",
> > +        "^__print_once\\.[0-9]+$",
> > +        "^___once_key\\.[0-9]+$",
> > +        "^__pfx_.*$",
> > +        "^__cfi_.*$"
> > +        ]
> > +
> > +class SeparatorType:
> > +    def __call__(self, separator):
> > +        if len(separator) != 1:
> > +            raise argparse.ArgumentTypeError("Separator must be a single character")
> > +        return separator
> > +
> > +Line = namedtuple('Line', ['address', 'type', 'name'])
> > +
> > +def parse_file(filename):
> > +    symbol_list = []
> > +    name_occurrences = {}
> > +
> > +    with open(filename, 'r') as file:
> > +        for line in file:
> > +            fields = line.strip().split()
> > +
> > +            if len(fields) >= 3:
> > +                address, type, name = fields[0], fields[1], ' '.join(fields[2:])
> > +                symbol_list.append(Line(address, type, name))
> > +                name_occurrences[name] = name_occurrences.get(name, 0) + 1
> > +
> > +    return symbol_list, name_occurrences
> > +
> > +def find_duplicate(symbol_list, name_occurrences):
> > +    name_to_lines = {}
> > +    duplicate_lines = []
> > +
> > +    for line in symbol_list:
> > +        if line.name in name_to_lines:
> > +            first_occurrence = name_to_lines[line.name]
> > +            duplicate_lines.extend([first_occurrence, line])
> > +        else:
> > +            name_to_lines[line.name] = line
> > +
> > +    return duplicate_lines
> > +
> > +def start_addr2line_process(binary_file, addr2line_file):
> > +    try:
> > +        addr2line_process = subprocess.Popen([addr2line_file, '-fe', binary_file],
> > +                                             stdin=subprocess.PIPE,
> > +                                             stdout=subprocess.PIPE,
> > +                                             stderr=subprocess.PIPE,
> > +                                             text=True)
> > +        return addr2line_process
> > +    except Exception as e:
> > +        print(f"Error starting addr2line process: {str(e)}")
> > +        sys.exit(1)
> > +
> > +def addr2line_fetch_address(addr2line_process, address):
> > +    try:
> > +        addr2line_process.stdin.write(address + '\n')
> > +        addr2line_process.stdin.flush()
> > +        addr2line_process.stdout.readline().strip()
> > +        output = addr2line_process.stdout.readline().strip()
> > +
> > +        return os.path.normpath(output)
> > +    except Exception as e:
> > +        print(f"Error communicating with addr2line: {str(e)}")
> > +        sys.exit(1)
> > +
> > +def process_line(obj, config):
> > +    if config:
> > +        return not (any(re.match(regex, obj.name) for regex in regex_filter))
> > +    else:
> > +        return obj.type in {"T", "t"}
> > +
> > +if __name__ == "__main__":
> > +    parser = argparse.ArgumentParser(description='Add alias to multiple occurring symbols name in kallsyms')
> > +    parser.add_argument('-a', "--addr2line", dest="addr2line_file", required=True)
> > +    parser.add_argument('-v', "--vmlinux", dest="vmlinux_file", required=True)
> > +    parser.add_argument('-o', "--outfile", dest="output_file", required=True)
> > +    parser.add_argument('-n', "--nmdata", dest="nm_data_file", required=True)
> > +    parser.add_argument('-b', "--basedir", dest="linux_base_dir", required=True)
> > +    parser.add_argument('-s', "--separator", dest="separator", required=False, default="@", type=SeparatorType())
> > +    parser.add_argument('-d', "--data", dest="include_data", required=False, action='store_true')
> > +    config = parser.parse_args()
> > +
> > +    try:
> > +        config.linux_base_dir = os.path.normpath(os.getcwd() + "/" + config.linux_base_dir) + "/"
> 
> This logic normalization fails when you are building the kernel in a directory
> that is symbolically linked to another fs.  E.g. I have:
> 
> 	/home/kvanhees/linux-stable
> 
> which is a symbolic link to
> 
> 	/local/linux-stable	
> 
> Since /local is its own fs, the above normalization expression renders the
> passed-in basedir "." to be /local/linux-stable, but addr2line is reporting
> filenames under /home/kvanhees/linux-stable
> 
> > +        symbol_list, name_occurrences = parse_file(config.nm_data_file)
> > +        addr2line_process = start_addr2line_process(config.vmlinux_file, config.addr2line_file)
> > +
> > +        with open(config.output_file, 'w') as file:
> > +            for obj in symbol_list:
> > +                file.write(f"{obj.address} {obj.type} {obj.name}\n")
> > +                if (name_occurrences[obj.name] > 1) and process_line(obj, config.include_data) :
> > +                    output = addr2line_fetch_address(addr2line_process, obj.address)
> > +                    decoration = config.separator + "".join(
> > +                        "_" if not c.isalnum() else c for c in output.replace(config.linux_base_dir, "")
> > +                    )
> > +                    # The addr2line can emit the special string "?:??" when addr2line can not find the
> > +                    # specified address in the DWARF section that after normalization it becomes "____".
> > +                    # In such cases, emitting an alias wouldn't make sense, so it is skipped.
> > +                    if decoration != config.separator + "____":
> > +                        file.write(f"{obj.address} {obj.type} {obj.name + decoration}\n")
> > +
> > +        addr2line_process.stdin.close()
> > +        addr2line_process.stdout.close()
> > +        addr2line_process.stderr.close()
> > +        addr2line_process.wait()
> > +
> > +    except Exception as e:
> > +        print(f"An error occurred: {str(e)}")
> > +        raise SystemExit("Script terminated due to an error")
> > diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
> > index a432b171be82..c110b0f58a19 100755
> > --- a/scripts/link-vmlinux.sh
> > +++ b/scripts/link-vmlinux.sh
> > @@ -91,7 +91,12 @@ vmlinux_link()
> >  
> >  	# The kallsyms linking does not need debug symbols included.
> >  	if [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
> > -		ldflags="${ldflags} ${wl}--strip-debug"
> > +		# The kallsyms linking does not need debug symbols included,
> > +		# unless the KALLSYMS_ALIAS_SRCLINE.
> > +		if ! is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE && \
> > +		   [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
> > +			ldflags="${ldflags} ${wl}--strip-debug"
> > +		fi
> >  	fi
> >  
> >  	if is_enabled CONFIG_VMLINUX_MAP; then
> > @@ -161,7 +166,19 @@ kallsyms()
> >  	fi
> >  
> >  	info KSYMS ${2}
> > -	scripts/kallsyms ${kallsymopt} ${1} > ${2}
> > +	ALIAS=""
> > +	KAS_DATA=""
> > +	if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE_DATA; then
> > +		KAS_DATA="--data"
> > +	fi
> > +	if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE; then
> > +		ALIAS=".alias"
> > +		${srctree}/scripts/kas_alias.py \
> > +			--addr2line ${ADDR2LINE} --vmlinux ${kallsyms_vmlinux} \
> > +			--nmdata ${1} --outfile ${1}${ALIAS} \
> > +			--basedir ${srctree} --separator @ ${KAS_DATA}
> > +	fi
> > +	scripts/kallsyms ${kallsymopt} ${1}${ALIAS} > ${2}
> >  }
> >  
> >  # Perform one step in kallsyms generation, including temporary linking of
> > -- 
> > 2.34.1
  
Alessandro Carminati (Red Hat) Oct. 9, 2023, 1:14 p.m. UTC | #6
Hello Kris,

Thank you for your contribution and for having your thought shared with me.

Allow me to begin this conversation by explaining what came to mind when
I decided to propose a patch that creates aliases.

The objective was to address a specific problem I was facing while
minimizing any potential impact on other aspects.
My initial consideration was the existence of numerous tools, both in the
kernel and in userspace, that rely on the current kallsyms implementation.
Both Nick and I shared the concern that making changes to elements upon
which these tools depend on could have significant consequences.

To the best of my knowledge, Nick's strategy has been to duplicate kallsyms
with something new - a new, improved kallsyms file.

However, even if Nick's patch were to be accepted, it wouldn't fully meet
my personal requirements.
This is because my goal was to utilize kprobe on a symbol that shares its
name with others. Nick's work wouldn't allow me to do this, and that's why,
I proposed an alternative.

As a result, my strategy was more modest and focused solely on creating
aliases for duplicate symbols.
By adding these aliases, existing tools would remain unaffected, and the
current system state and ecosystem would be preserved.
For instance, mechanisms like live patching could continue to use the
symbol hit count.

On the flip side, introducing these new symbols would enable tracers to
directly employ the new names without any modifications, and humans could
easily identify the symbol they are dealing with just by examining the
name.
These are the fundamental principles behind my patch - introducing aliases.

Il giorno gio 5 ott 2023 alle ore 18:25 Kris Van Hees
<kris.van.hees@oracle.com> ha scritto:
>
> On Wed, Sep 27, 2023 at 05:35:16PM +0000, Alessandro Carminati (Red Hat) wrote:
> > It is not uncommon for drivers or modules related to similar peripherals
> > to have symbols with the exact same name.
> > While this is not a problem for the kernel's binary itself, it becomes an
> > issue when attempting to trace or probe specific functions using
> > infrastructure like ftrace or kprobe.
> >
> > The tracing subsystem relies on the `nm -n vmlinux` output, which provides
> > symbol information from the kernel's ELF binary. However, when multiple
> > symbols share the same name, the standard nm output does not differentiate
> > between them. This can lead to confusion and difficulty when trying to
> > probe the intended symbol.
> >
> >  ~ # cat /proc/kallsyms | grep " name_show"
> >  ffffffff8c4f76d0 t name_show
> >  ffffffff8c9cccb0 t name_show
> >  ffffffff8cb0ac20 t name_show
> >  ffffffff8cc728c0 t name_show
> >  ffffffff8ce0efd0 t name_show
> >  ffffffff8ce126c0 t name_show
> >  ffffffff8ce1dd20 t name_show
> >  ffffffff8ce24e70 t name_show
> >  ffffffff8d1104c0 t name_show
> >  ffffffff8d1fe480 t name_show
>
> One problem that remains as far as I can see is that this approach does not
> take into consideration that there can be duplicate symbols in the core
> kernel, but also between core kernel and loadable modules, and even between
> loadable modules.  So, I think more is needed to also ensure that this
> approach of adding alias symbols is also done for loadable modules.
>
> Earlier work that cover all symbols (core kernel and loadable modules) was
> posted quite a while ago by Nick Alcock:
>
> https://lore.kernel.org/all/20221205163157.269335-1-nick.alcock@oracle.com/
>
> It takes a different approach and adds in other info that is very useful for
> tracing, but unfortunately it has been dormant for a long time now.
>
> While module symbols are handled quite differently (for kallsyms) from the
> core kernel symbols, I think that a similar approach tied in with modpost
> ought to be quite possible.  It will add to the size of modules because the
> data needs to be stored in the .ko but that is unavoidable.  But not doing it
> unfortunately would mean that the duplicate symbol issue remains unresolved
> in the presence of loadable modules.
>

In the current implementation, my work is capable of "addressing" the issue
only for duplicate symbols within the core kernel image.
This is a fact.
Currently, modules are not within the scope of my work.

Originally, my intention was to deal with duplicates in modules as the
subsequent objective.

I agree with you that addressing duplicate symbols in modules is something
that needs to be resolved, but from my perspective, it appeared to be of
lesser importance.
This is because, when trace tools are used manually, there is already an
indication of the modules where the name originates.

In this context, I would welcome the opportunity to explore additional use
cases.
By doing so, I can better align any future proposals with these real-world
scenarios and requirements I'm not considering in this moment.

In my initial intention, I had hoped to extend the use of aliases to modules
as well.
However, I encountered some challenges that need to be addressed first.
If I were to continue with this strategy, it would necessitate an impact on
the current build flow, which is something that should be discussed before
taking any concrete steps.

To identify which symbols are duplicated, including those contained in
modules, it requires exploring all the objects. If I were to propose a
complementary tool to kas_alias that operates on modules, it would need to
run on all objects to ascertain the state of the names.
Only after this assessment could it produce its output.
This would entail postponing the second kallsyms pass until after all
modules have been processed.
Additionally, modules would need to be processed twice: once to assess the
names and a second time to generate aliases for duplicated symbols.
I am uncertain if the community would be willing to accept such a delay in
the build process to introduce this feature.

Another point worth noting is the importance of exporting this duplicate
name report in public headers to ensure consistency for oot modules.

These are my thoughts on the potential extension of my work to encompass
symbol duplicates in loadable modules. I'm genuinely interested in hearing
your perspective and ideas. If you're planning to explore a completely
different approach or believe that the alias strategy may not be the most
effective way forward, I would be happy to collaborate and combine our
efforts to propose a patch that comprehensively addresses the issue of
symbol duplicates in all its facets. Sharing our expertise and working
together could lead to a more robust and inclusive solution for the Linux
kernel community.

> > kas_alias addresses this challenge by enhancing symbol names with
> > meaningful suffixes generated from the source file and line number
> > during the kernel build process.
> > These newly generated aliases provide tracers with the ability to
> > comprehend the symbols they are interacting with when utilizing the
> > ftracefs interface.
> > This approach may also allow for the probing by name of previously
> > inaccessible symbols.
> >
> >  ~ # cat /proc/kallsyms | grep gic_mask_irq
> >  ffffd15671e505ac t gic_mask_irq
> >  ffffd15671e505ac t gic_mask_irq@drivers_irqchip_irq_gic_c_167
> >  ffffd15671e532a4 t gic_mask_irq
> >  ffffd15671e532a4 t gic_mask_irq@drivers_irqchip_irq_gic_v3_c_407
> >  ~ #
>
> In the same context as mentioned above (module symbols), I am hoping that the
> alias you generate might also be able to contain a module identifier name,
> much like the aforementioned patch series by Nick Alcock added.  We have it
> for loadable modules already of course, but as has been discussed in relation
> to the earlier work, being able to associate a module name with a symbol
> regardless of whether that module is configured to be built into the kernel
> or whether it is configured to be a loadable module is helpful for tracing
> purposes.  Especially for tracers that use tracing scripts that might get
> deployed on diverse systems where it cannot always be known at the time of
> developing the tracer scripts whether a kernel module is configured to be
> loadable or built-in.
>
> I'd be happy to work on something like this as a contribution to your work.
> I would envision the alias entry not needing to have the typical [module] added
> to it because that will already be annotated on the actual symbol entry.  So,
> the alias could be extended to be something like:
>
> ffffffffc0533720 t floppy_open  [floppy]
> ffffffffc0533720 t floppy_open@floppy:drivers_block_floppy_c_3988
>
> (absence of a name: prefix to the path would indicate the symbol is not
>  associated with any module)
>
> Doing this is more realistic now as a result of the clean-up patches that
> Nick introduced, e.g.
>
> https://lore.kernel.org/lkml/20230302211759.30135-1-nick.alcock@oracle.com/
>

Personally, I don't perceive any specific benefit in including the module name
as part of the decoration. Please don't get me wrong; I do recognize that it
enhances clarity in Nick's work.
In that context, a human can easily discern that a duplicated name originates
from a module, aiding in understanding which symbol they require as it is
already for duplicates coming from modules.

However, when it comes to my current implementation, I don't see a compelling
reason to include module name into the decoration I append to names aliases.
Please accept my apologies if I may not be taking into account any obvious use
cases, but as it stands, I don't find a strong rationale for incorporating
module names into the symbol decoration.

In any case, as you've pointed out, duplicates can arise from names in code
that is not intended to be a module.
Therefore, relying solely on the module name would not fully address the
problem you initially aimed to solve.

> > Changes from v1:
> > - Integrated changes requested by Masami to exclude symbols with prefixes
> >   "_cfi" and "_pfx".
> > - Introduced a small framework to handle patterns that need to be excluded
> >   from the alias production.
> > - Excluded other symbols using the framework.
> > - Introduced the ability to discriminate between text and data symbols.
> > - Added two new config symbols in this version: CONFIG_KALLSYMS_ALIAS_DATA,
> >   which allows data for data, and CONFIG_KALLSYMS_ALIAS_DATA_ALL, which
> >   excludes all filters and provides an alias for each duplicated symbol.
> >
> > https://lore.kernel.org/all/20230711151925.1092080-1-alessandro.carminati@gmail.com/
> >
> > Changes from v2:
> > - Alias tags are created by querying DWARF information from the vmlinux.
> > - The filename + line number is normalized and appended to the original
> >   name.
> > - The tag begins with '@' to indicate the symbol source.
> > - Not a change, but worth mentioning, since the alias is added to the
> >   existing list, the old duplicated name is preserved, and the livepatch
> >   way of dealing with duplicates is maintained.
> > - Acknowledging the existence of scenarios where inlined functions
> >   declared in header files may result in multiple copies due to compiler
> >   behavior, though it is not actionable as it does not pose an operational
> >   issue.
> > - Highlighting a single exception where the same name refers to different
> >   functions: the case of "compat_binfmt_elf.c," which directly includes
> >   "binfmt_elf.c" producing identical function copies in two separate
> >   modules.
> >
> > https://lore.kernel.org/all/20230714150326.1152359-1-alessandro.carminati@gmail.com/
> >
> > Changes from v3:
> > - kas_alias was rewritten in Python to create a more concise and
> >   maintainable codebase.
> > - The previous automation process used by kas_alias to locate the vmlinux
> >   and the addr2line has been replaced with an explicit command-line switch
> >   for specifying these requirements.
> > - addr2line has been added into the main Makefile.
> > - A new command-line switch has been introduced, enabling users to extend
> >   the alias to global data names.
> >
> > https://lore.kernel.org/all/20230828080423.3539686-1-alessandro.carminati@gmail.com/
> >
> > Changes from v4:
> > - Fixed the O=<build dir> build issue
> > - The tool halts execution upon encountering major issues, thereby ensuring
> >   the pipeline is interrupted.
> > - A cmdline option to specify the source directory added.
> > - Minor code adjusments.
> > - Tested on mips32 and i386
> >
> > https://lore.kernel.org/all/20230919193948.465340-1-alessandro.carminati@gmail.com/
> >
> > NOTE:
> > About the symbols name duplication that happens as consequence of the
> > inclusion compat_binfmt_elf.c does, it is evident that this corner is
> > inherently challenging the addr2line approach.
> > Attempting to conceal this limitation would be counterproductive.
> >
> > compat_binfmt_elf.c includes directly binfmt_elf.c, addr2line can't help
> > but report all functions and data declared by that file, coming from
> > binfmt_elf.c.
> >
> > My position is that, rather than producing a more complicated pipeline
> > to handle this corner case, it is better to fix the compat_binfmt_elf.c
> > anomaly.
> >
> > This patch does not deal with the two potentially problematic symbols
> > defined by compat_binfmt_elf.c
> >
> > Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
> > ---
> >  Makefile                |   4 +-
> >  init/Kconfig            |  22 +++++++
> >  scripts/kas_alias.py    | 136 ++++++++++++++++++++++++++++++++++++++++
> >  scripts/link-vmlinux.sh |  21 ++++++-
> >  4 files changed, 180 insertions(+), 3 deletions(-)
> >  create mode 100755 scripts/kas_alias.py
> >
> > diff --git a/Makefile b/Makefile
> > index 4f283d915e54..f33c179f4cc3 100644
> > --- a/Makefile
> > +++ b/Makefile
> > @@ -488,6 +488,7 @@ OBJCOPY           = $(LLVM_PREFIX)llvm-objcopy$(LLVM_SUFFIX)
> >  OBJDUMP              = $(LLVM_PREFIX)llvm-objdump$(LLVM_SUFFIX)
> >  READELF              = $(LLVM_PREFIX)llvm-readelf$(LLVM_SUFFIX)
> >  STRIP                = $(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX)
> > +ADDR2LINE    = $(LLVM_PREFIX)llvm-addr2line$(LLVM_SUFFIX)
> >  else
> >  CC           = $(CROSS_COMPILE)gcc
> >  LD           = $(CROSS_COMPILE)ld
> > @@ -497,6 +498,7 @@ OBJCOPY           = $(CROSS_COMPILE)objcopy
> >  OBJDUMP              = $(CROSS_COMPILE)objdump
> >  READELF              = $(CROSS_COMPILE)readelf
> >  STRIP                = $(CROSS_COMPILE)strip
> > +ADDR2LINE    = $(CROSS_COMPILE)addr2line
> >  endif
> >  RUSTC                = rustc
> >  RUSTDOC              = rustdoc
> > @@ -611,7 +613,7 @@ export RUSTC_BOOTSTRAP := 1
> >  export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG
> >  export RUSTC RUSTDOC RUSTFMT RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN CARGO
> >  export HOSTRUSTC KBUILD_HOSTRUSTFLAGS
> > -export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
> > +export CPP AR NM STRIP OBJCOPY OBJDUMP READELF ADDR2LINE PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
> >  export PERL PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
> >  export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD
> >  export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
> > diff --git a/init/Kconfig b/init/Kconfig
> > index 6d35728b94b2..d45dd423e1ec 100644
> > --- a/init/Kconfig
> > +++ b/init/Kconfig
> > @@ -1738,6 +1738,28 @@ config KALLSYMS_BASE_RELATIVE
> >         time constants, and no relocation pass is required at runtime to fix
> >         up the entries based on the runtime load address of the kernel.
> >
> > +config KALLSYMS_ALIAS_SRCLINE
> > +     bool "Produces alias for duplicated text symbols" if EXPERT
> > +     depends on KALLSYMS && DEBUG_INFO && !DEBUG_INFO_SPLIT
> > +     help
> > +       It is not uncommon for drivers or modules related to similar
> > +       peripherals to have symbols with the exact same name.
> > +       While this is not a problem for the kernel's binary itself, it
> > +       becomes an issue when attempting to trace or probe specific
> > +       functions using infrastructure like ftrace or kprobe.
> > +
> > +       This option addresses this challenge, producing alias for text
> > +       symbol names that include the file name and line where the symbols
> > +       are defined in the source code.
> > +
> > +config KALLSYMS_ALIAS_SRCLINE_DATA
> > +     bool "Produces alias also for global variables names"
> > +     depends on KALLSYMS_ALIAS_SRCLINE
> > +     help
> > +       Sometimes it can be useful to refer to global vars by name. Since
> > +       they suffer the same issue as text symbols, this config option
> > +       allows having aliases for global variables names too.
> > +
> >  # end of the "standard kernel features (expert users)" menu
> >
> >  # syscall, maps, verifier
> > diff --git a/scripts/kas_alias.py b/scripts/kas_alias.py
> > new file mode 100755
> > index 000000000000..7c6b7045081c
> > --- /dev/null
> > +++ b/scripts/kas_alias.py
> > @@ -0,0 +1,136 @@
> > +#!/usr/bin/env python3
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +#
> > +# Copyright (C) 2023 Red Hat, Inc. Alessandro Carminati <alessandro.carminati@gmail.com>
> > +#
> > +# kas_alias: Adds alias to duplicate symbols in the kallsyms output.
> > +
> > +import subprocess
> > +import sys
> > +import os
> > +import argparse
> > +import re
> > +from collections import namedtuple
> > +
> > +regex_filter = [
> > +        "^__compound_literal\\.[0-9]+$",
> > +        "^__[wm]*key\\.[0-9]+$",
> > +        "^_*TRACE_SYSTEM.*$",
> > +        "^__already_done\\.[0-9]+$",
> > +        "^__msg\\.[0-9]+$",
> > +        "^__func__\\.[0-9]+$",
> > +        "^CSWTCH\\.[0-9]+$",
> > +        "^_rs\\.[0-9]+$",
> > +        "^___tp_str\\.[0-9]+$",
> > +        "^__flags\\.[0-9]+$",
> > +        "^___done\\.[0-9]+$",
> > +        "^__print_once\\.[0-9]+$",
> > +        "^___once_key\\.[0-9]+$",
> > +        "^__pfx_.*$",
> > +        "^__cfi_.*$"
> > +        ]
> > +
> > +class SeparatorType:
> > +    def __call__(self, separator):
> > +        if len(separator) != 1:
> > +            raise argparse.ArgumentTypeError("Separator must be a single character")
> > +        return separator
> > +
> > +Line = namedtuple('Line', ['address', 'type', 'name'])
> > +
> > +def parse_file(filename):
> > +    symbol_list = []
> > +    name_occurrences = {}
> > +
> > +    with open(filename, 'r') as file:
> > +        for line in file:
> > +            fields = line.strip().split()
> > +
> > +            if len(fields) >= 3:
> > +                address, type, name = fields[0], fields[1], ' '.join(fields[2:])
> > +                symbol_list.append(Line(address, type, name))
> > +                name_occurrences[name] = name_occurrences.get(name, 0) + 1
> > +
> > +    return symbol_list, name_occurrences
> > +
> > +def find_duplicate(symbol_list, name_occurrences):
> > +    name_to_lines = {}
> > +    duplicate_lines = []
> > +
> > +    for line in symbol_list:
> > +        if line.name in name_to_lines:
> > +            first_occurrence = name_to_lines[line.name]
> > +            duplicate_lines.extend([first_occurrence, line])
> > +        else:
> > +            name_to_lines[line.name] = line
> > +
> > +    return duplicate_lines
> > +
> > +def start_addr2line_process(binary_file, addr2line_file):
> > +    try:
> > +        addr2line_process = subprocess.Popen([addr2line_file, '-fe', binary_file],
> > +                                             stdin=subprocess.PIPE,
> > +                                             stdout=subprocess.PIPE,
> > +                                             stderr=subprocess.PIPE,
> > +                                             text=True)
> > +        return addr2line_process
> > +    except Exception as e:
> > +        print(f"Error starting addr2line process: {str(e)}")
> > +        sys.exit(1)
> > +
> > +def addr2line_fetch_address(addr2line_process, address):
> > +    try:
> > +        addr2line_process.stdin.write(address + '\n')
> > +        addr2line_process.stdin.flush()
> > +        addr2line_process.stdout.readline().strip()
> > +        output = addr2line_process.stdout.readline().strip()
> > +
> > +        return os.path.normpath(output)
> > +    except Exception as e:
> > +        print(f"Error communicating with addr2line: {str(e)}")
> > +        sys.exit(1)
> > +
> > +def process_line(obj, config):
> > +    if config:
> > +        return not (any(re.match(regex, obj.name) for regex in regex_filter))
> > +    else:
> > +        return obj.type in {"T", "t"}
> > +
> > +if __name__ == "__main__":
> > +    parser = argparse.ArgumentParser(description='Add alias to multiple occurring symbols name in kallsyms')
> > +    parser.add_argument('-a', "--addr2line", dest="addr2line_file", required=True)
> > +    parser.add_argument('-v', "--vmlinux", dest="vmlinux_file", required=True)
> > +    parser.add_argument('-o', "--outfile", dest="output_file", required=True)
> > +    parser.add_argument('-n', "--nmdata", dest="nm_data_file", required=True)
> > +    parser.add_argument('-b', "--basedir", dest="linux_base_dir", required=True)
> > +    parser.add_argument('-s', "--separator", dest="separator", required=False, default="@", type=SeparatorType())
> > +    parser.add_argument('-d', "--data", dest="include_data", required=False, action='store_true')
> > +    config = parser.parse_args()
> > +
> > +    try:
> > +        config.linux_base_dir = os.path.normpath(os.getcwd() + "/" + config.linux_base_dir) + "/"
>
> This logic normalization fails when you are building the kernel in a directory
> that is symbolically linked to another fs.  E.g. I have:
>
>         /home/kvanhees/linux-stable
>
> which is a symbolic link to
>
>         /local/linux-stable
>
> Since /local is its own fs, the above normalization expression renders the
> passed-in basedir "." to be /local/linux-stable, but addr2line is reporting
> filenames under /home/kvanhees/linux-stable
>
> > +        symbol_list, name_occurrences = parse_file(config.nm_data_file)
> > +        addr2line_process = start_addr2line_process(config.vmlinux_file, config.addr2line_file)
> > +
> > +        with open(config.output_file, 'w') as file:
> > +            for obj in symbol_list:
> > +                file.write(f"{obj.address} {obj.type} {obj.name}\n")
> > +                if (name_occurrences[obj.name] > 1) and process_line(obj, config.include_data) :
> > +                    output = addr2line_fetch_address(addr2line_process, obj.address)
> > +                    decoration = config.separator + "".join(
> > +                        "_" if not c.isalnum() else c for c in output.replace(config.linux_base_dir, "")
> > +                    )
> > +                    # The addr2line can emit the special string "?:??" when addr2line can not find the
> > +                    # specified address in the DWARF section that after normalization it becomes "____".
> > +                    # In such cases, emitting an alias wouldn't make sense, so it is skipped.
> > +                    if decoration != config.separator + "____":
> > +                        file.write(f"{obj.address} {obj.type} {obj.name + decoration}\n")
> > +
> > +        addr2line_process.stdin.close()
> > +        addr2line_process.stdout.close()
> > +        addr2line_process.stderr.close()
> > +        addr2line_process.wait()
> > +
> > +    except Exception as e:
> > +        print(f"An error occurred: {str(e)}")
> > +        raise SystemExit("Script terminated due to an error")
> > diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
> > index a432b171be82..c110b0f58a19 100755
> > --- a/scripts/link-vmlinux.sh
> > +++ b/scripts/link-vmlinux.sh
> > @@ -91,7 +91,12 @@ vmlinux_link()
> >
> >       # The kallsyms linking does not need debug symbols included.
> >       if [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
> > -             ldflags="${ldflags} ${wl}--strip-debug"
> > +             # The kallsyms linking does not need debug symbols included,
> > +             # unless the KALLSYMS_ALIAS_SRCLINE.
> > +             if ! is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE && \
> > +                [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
> > +                     ldflags="${ldflags} ${wl}--strip-debug"
> > +             fi
> >       fi
> >
> >       if is_enabled CONFIG_VMLINUX_MAP; then
> > @@ -161,7 +166,19 @@ kallsyms()
> >       fi
> >
> >       info KSYMS ${2}
> > -     scripts/kallsyms ${kallsymopt} ${1} > ${2}
> > +     ALIAS=""
> > +     KAS_DATA=""
> > +     if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE_DATA; then
> > +             KAS_DATA="--data"
> > +     fi
> > +     if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE; then
> > +             ALIAS=".alias"
> > +             ${srctree}/scripts/kas_alias.py \
> > +                     --addr2line ${ADDR2LINE} --vmlinux ${kallsyms_vmlinux} \
> > +                     --nmdata ${1} --outfile ${1}${ALIAS} \
> > +                     --basedir ${srctree} --separator @ ${KAS_DATA}
> > +     fi
> > +     scripts/kallsyms ${kallsymopt} ${1}${ALIAS} > ${2}
> >  }
> >
> >  # Perform one step in kallsyms generation, including temporary linking of
> > --
> > 2.34.1

Thank you.
Alessandro
  
Petr Mladek Oct. 10, 2023, 11:33 a.m. UTC | #7
On Mon 2023-10-09 15:14:28, Alessandro Carminati wrote:
> Hello Kris,
> 
> Thank you for your contribution and for having your thought shared with me.
> 
> Allow me to begin this conversation by explaining what came to mind when
> I decided to propose a patch that creates aliases.
> 
> The objective was to address a specific problem I was facing while
> minimizing any potential impact on other aspects.
> My initial consideration was the existence of numerous tools, both in the
> kernel and in userspace, that rely on the current kallsyms implementation.
> Both Nick and I shared the concern that making changes to elements upon
> which these tools depend on could have significant consequences.
> 
> To the best of my knowledge, Nick's strategy has been to duplicate kallsyms
> with something new - a new, improved kallsyms file.
> 
> However, even if Nick's patch were to be accepted, it wouldn't fully meet
> my personal requirements.
> This is because my goal was to utilize kprobe on a symbol that shares its
> name with others. Nick's work wouldn't allow me to do this, and that's why,
> I proposed an alternative.
> 
> As a result, my strategy was more modest and focused solely on creating
> aliases for duplicate symbols.
> By adding these aliases, existing tools would remain unaffected, and the
> current system state and ecosystem would be preserved.
> For instance, mechanisms like live patching could continue to use the
> symbol hit count.
> 
> On the flip side, introducing these new symbols would enable tracers to
> directly employ the new names without any modifications, and humans could
> easily identify the symbol they are dealing with just by examining the
> name.
> These are the fundamental principles behind my patch - introducing aliases.
> 
> Il giorno gio 5 ott 2023 alle ore 18:25 Kris Van Hees
> <kris.van.hees@oracle.com> ha scritto:
> >
> > On Wed, Sep 27, 2023 at 05:35:16PM +0000, Alessandro Carminati (Red Hat) wrote:
> > > It is not uncommon for drivers or modules related to similar peripherals
> > > to have symbols with the exact same name.
> > > While this is not a problem for the kernel's binary itself, it becomes an
> > > issue when attempting to trace or probe specific functions using
> > > infrastructure like ftrace or kprobe.
> > >
> > > The tracing subsystem relies on the `nm -n vmlinux` output, which provides
> > > symbol information from the kernel's ELF binary. However, when multiple
> > > symbols share the same name, the standard nm output does not differentiate
> > > between them. This can lead to confusion and difficulty when trying to
> > > probe the intended symbol.
> > >
> > >  ~ # cat /proc/kallsyms | grep " name_show"
> > >  ffffffff8c4f76d0 t name_show
> > >  ffffffff8c9cccb0 t name_show
> > >  ffffffff8cb0ac20 t name_show
> > >  ffffffff8cc728c0 t name_show
> > >  ffffffff8ce0efd0 t name_show
> > >  ffffffff8ce126c0 t name_show
> > >  ffffffff8ce1dd20 t name_show
> > >  ffffffff8ce24e70 t name_show
> > >  ffffffff8d1104c0 t name_show
> > >  ffffffff8d1fe480 t name_show
> >
> > One problem that remains as far as I can see is that this approach does not
> > take into consideration that there can be duplicate symbols in the core
> > kernel, but also between core kernel and loadable modules, and even between
> > loadable modules.  So, I think more is needed to also ensure that this
> > approach of adding alias symbols is also done for loadable modules.
> 
> To identify which symbols are duplicated, including those contained in
> modules, it requires exploring all the objects. If I were to propose a
> complementary tool to kas_alias that operates on modules, it would need to
> run on all objects to ascertain the state of the names.
> Only after this assessment could it produce its output.
> This would entail postponing the second kallsyms pass until after all
> modules have been processed.
> Additionally, modules would need to be processed twice: once to assess the
> names and a second time to generate aliases for duplicated symbols.
> I am uncertain if the community would be willing to accept such a delay in
> the build process to introduce this feature.

From the livepatching POV:

  + It needs a way to distinguish duplicate symbols within a module.

  + It does _not_ need to distinguish symbols which have the same name
    in two modules or in a module and vmlinux.

Background: The livepatch contains a structure where the livepatched
symbols are already split per-livepatched objects: vmlinux or modules.
I has to know whether a later loaded or removed module is livepatched
or not and what functions need some tweaking.

> > I'd be happy to work on something like this as a contribution to your work.
> > I would envision the alias entry not needing to have the typical [module] added
> > to it because that will already be annotated on the actual symbol entry.  So,
> > the alias could be extended to be something like:
> >
> > ffffffffc0533720 t floppy_open  [floppy]
> > ffffffffc0533720 t floppy_open@floppy:drivers_block_floppy_c_3988
> >
> > (absence of a name: prefix to the path would indicate the symbol is not
> >  associated with any module)
> >
> > Doing this is more realistic now as a result of the clean-up patches that
> > Nick introduced, e.g.
> >
> > https://lore.kernel.org/lkml/20230302211759.30135-1-nick.alcock@oracle.com/
> >
> 
> Personally, I don't perceive any specific benefit in including the module name
> as part of the decoration. Please don't get me wrong; I do recognize that it
> enhances clarity in Nick's work.
> In that context, a human can easily discern that a duplicated name originates
> from a module, aiding in understanding which symbol they require as it is
> already for duplicates coming from modules.
> 
> However, when it comes to my current implementation, I don't see a compelling
> reason to include module name into the decoration I append to names aliases.
> Please accept my apologies if I may not be taking into account any obvious use
> cases, but as it stands, I don't find a strong rationale for incorporating
> module names into the symbol decoration.
>
> In any case, as you've pointed out, duplicates can arise from names in code
> that is not intended to be a module.
> Therefore, relying solely on the module name would not fully address the
> problem you initially aimed to solve.

From my POV:

The source path and the line number is enough to distinguish duplicate
symbols even in modules.

The added module name would just add extra complexity into the kernel
and tools parsing and using the alias. The tracing tools would need to
handle the source path and line number anyway for symbols duplicated
within same module/vmlinux.

Adding module name for builtin modules might be misleading. It won't
be clear which symbols are in vmlinux binary and which are in
real modules.

Best Regards,
Petr
  
Kris Van Hees Oct. 10, 2023, 2:48 p.m. UTC | #8
On Tue, Oct 10, 2023 at 01:33:09PM +0200, Petr Mladek wrote:
> On Mon 2023-10-09 15:14:28, Alessandro Carminati wrote:
> > Hello Kris,
> > 
> > Thank you for your contribution and for having your thought shared with me.
> > 
> > Allow me to begin this conversation by explaining what came to mind when
> > I decided to propose a patch that creates aliases.
> > 
> > The objective was to address a specific problem I was facing while
> > minimizing any potential impact on other aspects.
> > My initial consideration was the existence of numerous tools, both in the
> > kernel and in userspace, that rely on the current kallsyms implementation.
> > Both Nick and I shared the concern that making changes to elements upon
> > which these tools depend on could have significant consequences.
> > 
> > To the best of my knowledge, Nick's strategy has been to duplicate kallsyms
> > with something new - a new, improved kallsyms file.
> > 
> > However, even if Nick's patch were to be accepted, it wouldn't fully meet
> > my personal requirements.
> > This is because my goal was to utilize kprobe on a symbol that shares its
> > name with others. Nick's work wouldn't allow me to do this, and that's why,
> > I proposed an alternative.
> > 
> > As a result, my strategy was more modest and focused solely on creating
> > aliases for duplicate symbols.
> > By adding these aliases, existing tools would remain unaffected, and the
> > current system state and ecosystem would be preserved.
> > For instance, mechanisms like live patching could continue to use the
> > symbol hit count.
> > 
> > On the flip side, introducing these new symbols would enable tracers to
> > directly employ the new names without any modifications, and humans could
> > easily identify the symbol they are dealing with just by examining the
> > name.
> > These are the fundamental principles behind my patch - introducing aliases.
> > 
> > Il giorno gio 5 ott 2023 alle ore 18:25 Kris Van Hees
> > <kris.van.hees@oracle.com> ha scritto:
> > >
> > > On Wed, Sep 27, 2023 at 05:35:16PM +0000, Alessandro Carminati (Red Hat) wrote:
> > > > It is not uncommon for drivers or modules related to similar peripherals
> > > > to have symbols with the exact same name.
> > > > While this is not a problem for the kernel's binary itself, it becomes an
> > > > issue when attempting to trace or probe specific functions using
> > > > infrastructure like ftrace or kprobe.
> > > >
> > > > The tracing subsystem relies on the `nm -n vmlinux` output, which provides
> > > > symbol information from the kernel's ELF binary. However, when multiple
> > > > symbols share the same name, the standard nm output does not differentiate
> > > > between them. This can lead to confusion and difficulty when trying to
> > > > probe the intended symbol.
> > > >
> > > >  ~ # cat /proc/kallsyms | grep " name_show"
> > > >  ffffffff8c4f76d0 t name_show
> > > >  ffffffff8c9cccb0 t name_show
> > > >  ffffffff8cb0ac20 t name_show
> > > >  ffffffff8cc728c0 t name_show
> > > >  ffffffff8ce0efd0 t name_show
> > > >  ffffffff8ce126c0 t name_show
> > > >  ffffffff8ce1dd20 t name_show
> > > >  ffffffff8ce24e70 t name_show
> > > >  ffffffff8d1104c0 t name_show
> > > >  ffffffff8d1fe480 t name_show
> > >
> > > One problem that remains as far as I can see is that this approach does not
> > > take into consideration that there can be duplicate symbols in the core
> > > kernel, but also between core kernel and loadable modules, and even between
> > > loadable modules.  So, I think more is needed to also ensure that this
> > > approach of adding alias symbols is also done for loadable modules.
> > 
> > To identify which symbols are duplicated, including those contained in
> > modules, it requires exploring all the objects. If I were to propose a
> > complementary tool to kas_alias that operates on modules, it would need to
> > run on all objects to ascertain the state of the names.
> > Only after this assessment could it produce its output.
> > This would entail postponing the second kallsyms pass until after all
> > modules have been processed.
> > Additionally, modules would need to be processed twice: once to assess the
> > names and a second time to generate aliases for duplicated symbols.
> > I am uncertain if the community would be willing to accept such a delay in
> > the build process to introduce this feature.
> 
> >From the livepatching POV:
> 
>   + It needs a way to distinguish duplicate symbols within a module.
> 
>   + It does _not_ need to distinguish symbols which have the same name
>     in two modules or in a module and vmlinux.
> 
> Background: The livepatch contains a structure where the livepatched
> symbols are already split per-livepatched objects: vmlinux or modules.
> I has to know whether a later loaded or removed module is livepatched
> or not and what functions need some tweaking.

Thank you for sharing the POV for livepatching.  That is cery helpful.

My follow-up email to my original response shows an example that demonstrates
this remaining problem...  a loadable module that contains a duplicate symbol,
so this issue does pop up (and is why I raise it here):

# grep ' metadata_show' /proc/kallsyms
ffffffffc05659c0 t metadata_show        [md_mod]
ffffffffc05739f0 t metadata_show        [md_mod]

This is certainly a harder problem to deal with because of how kallsyms data
for a module is handled, but unfortunately, there is a need because this
situation does occur.

> > > I'd be happy to work on something like this as a contribution to your work.
> > > I would envision the alias entry not needing to have the typical [module] added
> > > to it because that will already be annotated on the actual symbol entry.  So,
> > > the alias could be extended to be something like:
> > >
> > > ffffffffc0533720 t floppy_open  [floppy]
> > > ffffffffc0533720 t floppy_open@floppy:drivers_block_floppy_c_3988
> > >
> > > (absence of a name: prefix to the path would indicate the symbol is not
> > >  associated with any module)
> > >
> > > Doing this is more realistic now as a result of the clean-up patches that
> > > Nick introduced, e.g.
> > >
> > > https://lore.kernel.org/lkml/20230302211759.30135-1-nick.alcock@oracle.com/
> > >
> > 
> > Personally, I don't perceive any specific benefit in including the module name
> > as part of the decoration. Please don't get me wrong; I do recognize that it
> > enhances clarity in Nick's work.
> > In that context, a human can easily discern that a duplicated name originates
> > from a module, aiding in understanding which symbol they require as it is
> > already for duplicates coming from modules.
> > 
> > However, when it comes to my current implementation, I don't see a compelling
> > reason to include module name into the decoration I append to names aliases.
> > Please accept my apologies if I may not be taking into account any obvious use
> > cases, but as it stands, I don't find a strong rationale for incorporating
> > module names into the symbol decoration.
> >
> > In any case, as you've pointed out, duplicates can arise from names in code
> > that is not intended to be a module.
> > Therefore, relying solely on the module name would not fully address the
> > problem you initially aimed to solve.
> 
> >From my POV:
> 
> The source path and the line number is enough to distinguish duplicate
> symbols even in modules.
> 
> The added module name would just add extra complexity into the kernel
> and tools parsing and using the alias. The tracing tools would need to
> handle the source path and line number anyway for symbols duplicated
> within same module/vmlinux.
> 
> Adding module name for builtin modules might be misleading. It won't
> be clear which symbols are in vmlinux binary and which are in
> real modules.

The merit of having module names even for symbols that are in a module that is
built into the kernel image has been discussed before and there certainly is
a benefit for tracers.  Also, it is easy to avoid misleading information bu
making it easy to distinguish whether a module name is for a builtin module vs
a loaded module (e.g. Nick proposed {modname} vs [modname]). 

But I will defer that topic to a different mail thread, picking up from the
earlier discussions on this feature, and proposing a minimal patch to make
this data available in a way that is completely independent from this work
(and won't impact kallsyms data presentation in any way).

Thanks,
Kris
  
Daniel Bristot de Oliveira Oct. 16, 2023, 12:42 p.m. UTC | #9
>> In any case, as you've pointed out, duplicates can arise from names in code
>> that is not intended to be a module.
>> Therefore, relying solely on the module name would not fully address the
>> problem you initially aimed to solve.
> 
> From my POV:
> 
> The source path and the line number is enough to distinguish duplicate
> symbols even in modules.
> 
> The added module name would just add extra complexity into the kernel
> and tools parsing and using the alias. The tracing tools would need to
> handle the source path and line number anyway for symbols duplicated
> within same module/vmlinux.
> 
> Adding module name for builtin modules might be misleading. It won't
> be clear which symbols are in vmlinux binary and which are in
> real modules.

+1

-- Daniel
  

Patch

diff --git a/Makefile b/Makefile
index 4f283d915e54..f33c179f4cc3 100644
--- a/Makefile
+++ b/Makefile
@@ -488,6 +488,7 @@  OBJCOPY		= $(LLVM_PREFIX)llvm-objcopy$(LLVM_SUFFIX)
 OBJDUMP		= $(LLVM_PREFIX)llvm-objdump$(LLVM_SUFFIX)
 READELF		= $(LLVM_PREFIX)llvm-readelf$(LLVM_SUFFIX)
 STRIP		= $(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX)
+ADDR2LINE	= $(LLVM_PREFIX)llvm-addr2line$(LLVM_SUFFIX)
 else
 CC		= $(CROSS_COMPILE)gcc
 LD		= $(CROSS_COMPILE)ld
@@ -497,6 +498,7 @@  OBJCOPY		= $(CROSS_COMPILE)objcopy
 OBJDUMP		= $(CROSS_COMPILE)objdump
 READELF		= $(CROSS_COMPILE)readelf
 STRIP		= $(CROSS_COMPILE)strip
+ADDR2LINE	= $(CROSS_COMPILE)addr2line
 endif
 RUSTC		= rustc
 RUSTDOC		= rustdoc
@@ -611,7 +613,7 @@  export RUSTC_BOOTSTRAP := 1
 export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG
 export RUSTC RUSTDOC RUSTFMT RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN CARGO
 export HOSTRUSTC KBUILD_HOSTRUSTFLAGS
-export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
+export CPP AR NM STRIP OBJCOPY OBJDUMP READELF ADDR2LINE PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
 export PERL PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
 export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD
 export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
diff --git a/init/Kconfig b/init/Kconfig
index 6d35728b94b2..d45dd423e1ec 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1738,6 +1738,28 @@  config KALLSYMS_BASE_RELATIVE
 	  time constants, and no relocation pass is required at runtime to fix
 	  up the entries based on the runtime load address of the kernel.
 
+config KALLSYMS_ALIAS_SRCLINE
+	bool "Produces alias for duplicated text symbols" if EXPERT
+	depends on KALLSYMS && DEBUG_INFO && !DEBUG_INFO_SPLIT
+	help
+	  It is not uncommon for drivers or modules related to similar
+	  peripherals to have symbols with the exact same name.
+	  While this is not a problem for the kernel's binary itself, it
+	  becomes an issue when attempting to trace or probe specific
+	  functions using infrastructure like ftrace or kprobe.
+
+	  This option addresses this challenge, producing alias for text
+	  symbol names that include the file name and line where the symbols
+	  are defined in the source code.
+
+config KALLSYMS_ALIAS_SRCLINE_DATA
+	bool "Produces alias also for global variables names"
+	depends on KALLSYMS_ALIAS_SRCLINE
+	help
+	  Sometimes it can be useful to refer to global vars by name. Since
+	  they suffer the same issue as text symbols, this config option
+	  allows having aliases for global variables names too.
+
 # end of the "standard kernel features (expert users)" menu
 
 # syscall, maps, verifier
diff --git a/scripts/kas_alias.py b/scripts/kas_alias.py
new file mode 100755
index 000000000000..7c6b7045081c
--- /dev/null
+++ b/scripts/kas_alias.py
@@ -0,0 +1,136 @@ 
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2023 Red Hat, Inc. Alessandro Carminati <alessandro.carminati@gmail.com>
+#
+# kas_alias: Adds alias to duplicate symbols in the kallsyms output.
+
+import subprocess
+import sys
+import os
+import argparse
+import re
+from collections import namedtuple
+
+regex_filter = [
+        "^__compound_literal\\.[0-9]+$",
+        "^__[wm]*key\\.[0-9]+$",
+        "^_*TRACE_SYSTEM.*$",
+        "^__already_done\\.[0-9]+$",
+        "^__msg\\.[0-9]+$",
+        "^__func__\\.[0-9]+$",
+        "^CSWTCH\\.[0-9]+$",
+        "^_rs\\.[0-9]+$",
+        "^___tp_str\\.[0-9]+$",
+        "^__flags\\.[0-9]+$",
+        "^___done\\.[0-9]+$",
+        "^__print_once\\.[0-9]+$",
+        "^___once_key\\.[0-9]+$",
+        "^__pfx_.*$",
+        "^__cfi_.*$"
+        ]
+
+class SeparatorType:
+    def __call__(self, separator):
+        if len(separator) != 1:
+            raise argparse.ArgumentTypeError("Separator must be a single character")
+        return separator
+
+Line = namedtuple('Line', ['address', 'type', 'name'])
+
+def parse_file(filename):
+    symbol_list = []
+    name_occurrences = {}
+
+    with open(filename, 'r') as file:
+        for line in file:
+            fields = line.strip().split()
+
+            if len(fields) >= 3:
+                address, type, name = fields[0], fields[1], ' '.join(fields[2:])
+                symbol_list.append(Line(address, type, name))
+                name_occurrences[name] = name_occurrences.get(name, 0) + 1
+
+    return symbol_list, name_occurrences
+
+def find_duplicate(symbol_list, name_occurrences):
+    name_to_lines = {}
+    duplicate_lines = []
+
+    for line in symbol_list:
+        if line.name in name_to_lines:
+            first_occurrence = name_to_lines[line.name]
+            duplicate_lines.extend([first_occurrence, line])
+        else:
+            name_to_lines[line.name] = line
+
+    return duplicate_lines
+
+def start_addr2line_process(binary_file, addr2line_file):
+    try:
+        addr2line_process = subprocess.Popen([addr2line_file, '-fe', binary_file],
+                                             stdin=subprocess.PIPE,
+                                             stdout=subprocess.PIPE,
+                                             stderr=subprocess.PIPE,
+                                             text=True)
+        return addr2line_process
+    except Exception as e:
+        print(f"Error starting addr2line process: {str(e)}")
+        sys.exit(1)
+
+def addr2line_fetch_address(addr2line_process, address):
+    try:
+        addr2line_process.stdin.write(address + '\n')
+        addr2line_process.stdin.flush()
+        addr2line_process.stdout.readline().strip()
+        output = addr2line_process.stdout.readline().strip()
+
+        return os.path.normpath(output)
+    except Exception as e:
+        print(f"Error communicating with addr2line: {str(e)}")
+        sys.exit(1)
+
+def process_line(obj, config):
+    if config:
+        return not (any(re.match(regex, obj.name) for regex in regex_filter))
+    else:
+        return obj.type in {"T", "t"}
+
+if __name__ == "__main__":
+    parser = argparse.ArgumentParser(description='Add alias to multiple occurring symbols name in kallsyms')
+    parser.add_argument('-a', "--addr2line", dest="addr2line_file", required=True)
+    parser.add_argument('-v', "--vmlinux", dest="vmlinux_file", required=True)
+    parser.add_argument('-o', "--outfile", dest="output_file", required=True)
+    parser.add_argument('-n', "--nmdata", dest="nm_data_file", required=True)
+    parser.add_argument('-b', "--basedir", dest="linux_base_dir", required=True)
+    parser.add_argument('-s', "--separator", dest="separator", required=False, default="@", type=SeparatorType())
+    parser.add_argument('-d', "--data", dest="include_data", required=False, action='store_true')
+    config = parser.parse_args()
+
+    try:
+        config.linux_base_dir = os.path.normpath(os.getcwd() + "/" + config.linux_base_dir) + "/"
+        symbol_list, name_occurrences = parse_file(config.nm_data_file)
+        addr2line_process = start_addr2line_process(config.vmlinux_file, config.addr2line_file)
+
+        with open(config.output_file, 'w') as file:
+            for obj in symbol_list:
+                file.write(f"{obj.address} {obj.type} {obj.name}\n")
+                if (name_occurrences[obj.name] > 1) and process_line(obj, config.include_data) :
+                    output = addr2line_fetch_address(addr2line_process, obj.address)
+                    decoration = config.separator + "".join(
+                        "_" if not c.isalnum() else c for c in output.replace(config.linux_base_dir, "")
+                    )
+                    # The addr2line can emit the special string "?:??" when addr2line can not find the
+                    # specified address in the DWARF section that after normalization it becomes "____".
+                    # In such cases, emitting an alias wouldn't make sense, so it is skipped.
+                    if decoration != config.separator + "____":
+                        file.write(f"{obj.address} {obj.type} {obj.name + decoration}\n")
+
+        addr2line_process.stdin.close()
+        addr2line_process.stdout.close()
+        addr2line_process.stderr.close()
+        addr2line_process.wait()
+
+    except Exception as e:
+        print(f"An error occurred: {str(e)}")
+        raise SystemExit("Script terminated due to an error")
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index a432b171be82..c110b0f58a19 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -91,7 +91,12 @@  vmlinux_link()
 
 	# The kallsyms linking does not need debug symbols included.
 	if [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
-		ldflags="${ldflags} ${wl}--strip-debug"
+		# The kallsyms linking does not need debug symbols included,
+		# unless the KALLSYMS_ALIAS_SRCLINE.
+		if ! is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE && \
+		   [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
+			ldflags="${ldflags} ${wl}--strip-debug"
+		fi
 	fi
 
 	if is_enabled CONFIG_VMLINUX_MAP; then
@@ -161,7 +166,19 @@  kallsyms()
 	fi
 
 	info KSYMS ${2}
-	scripts/kallsyms ${kallsymopt} ${1} > ${2}
+	ALIAS=""
+	KAS_DATA=""
+	if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE_DATA; then
+		KAS_DATA="--data"
+	fi
+	if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE; then
+		ALIAS=".alias"
+		${srctree}/scripts/kas_alias.py \
+			--addr2line ${ADDR2LINE} --vmlinux ${kallsyms_vmlinux} \
+			--nmdata ${1} --outfile ${1}${ALIAS} \
+			--basedir ${srctree} --separator @ ${KAS_DATA}
+	fi
+	scripts/kallsyms ${kallsymopt} ${1}${ALIAS} > ${2}
 }
 
 # Perform one step in kallsyms generation, including temporary linking of