HID: lenovo: Fix middle-button behaviour for system suspend
Commit Message
After system suspend the middle-button mode is being reset to
compatibility mode which simply breaks functionality for the devices
where native mode is configured during probe().
Fix this by setting native mode in reset_resume() for the appropriate
devices.
Fixes: 94eefa271323 ("HID: lenovo: Use native middle-button mode for compact keyboards")
Signed-off-by: Martin Kepplinger <martink@posteo.de>
---
drivers/hid/hid-lenovo.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
Comments
On 2023-09-21 10:21, Martin Kepplinger wrote:
> After system suspend the middle-button mode is being reset to
> compatibility mode which simply breaks functionality for the devices
> where native mode is configured during probe().
>
> Fix this by setting native mode in reset_resume() for the appropriate
> devices.
>
> Fixes: 94eefa271323 ("HID: lenovo: Use native middle-button mode for
> compact keyboards")
> Signed-off-by: Martin Kepplinger <martink@posteo.de>
> ---
> drivers/hid/hid-lenovo.c | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c
> index 44763c0da444..d20562b9eca6 100644
> --- a/drivers/hid/hid-lenovo.c
> +++ b/drivers/hid/hid-lenovo.c
> @@ -1344,6 +1344,28 @@ static int lenovo_input_configured(struct
> hid_device *hdev,
> return 0;
> }
>
> +static int __maybe_unused lenovo_resume(struct hid_device *hdev)
> +{
> + int ret;
> +
> + switch (hdev->product) {
> + case USB_DEVICE_ID_LENOVO_CUSBKBD:
> + case USB_DEVICE_ID_LENOVO_CBTKBD:
> + case USB_DEVICE_ID_LENOVO_TPIIUSBKBD:
> + case USB_DEVICE_ID_LENOVO_TPIIBTKBD:
> + /* Switch middle button to native mode again */
> + ret = lenovo_send_cmd_cptkbd(hdev, 0x09, 0x01);
This will only reset the middle button state and not the Function key
state, which I believe has similar problems. This was my attempt at
solving this:
https://github.com/lentinj/linux/commit/f1c4e2de780abf8526bcdc9496c463f1ff4fe53b
...which should ensure everything is in a consistent state with what the
kernel expects.
I never submitted this since sending commands was sporadically resulting
in timeouts, although I'm fairly sure it was unrelated to this patch,
and quite possibly a hardware problem with my keyboard. I'd be
interested to know how you get on.
Also, the above will send the command to both the USB keyboard & mouse
devices, only the mouse will respond. So worth prepending something
like:
if (((hdev->product == USB_DEVICE_ID_LENOVO_CUSBKBD) ||
(hdev->product == USB_DEVICE_ID_LENOVO_TPIIUSBKBD)) &&
hdev->type != HID_TYPE_USBMOUSE) {
hid_dbg(hdev, "Ignoring keyboard half of device\n");
return 0;
}
...to avoid sending known-useless messages.
> + if (ret)
> + hid_warn(hdev, "Failed to switch middle button: %d\n",
> + ret);
> + break;
> + default:
> + ret = 0;
> + break;
> + }
> +
> + return ret;
> +}
>
> static const struct hid_device_id lenovo_devices[] = {
> { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPKBD) },
> @@ -1380,6 +1402,9 @@ static struct hid_driver lenovo_driver = {
> .raw_event = lenovo_raw_event,
> .event = lenovo_event,
> .report_fixup = lenovo_report_fixup,
> +#ifdef CONFIG_PM
> + .reset_resume = lenovo_resume,
> +#endif
> };
> module_hid_driver(lenovo_driver);
@@ -1344,6 +1344,28 @@ static int lenovo_input_configured(struct hid_device *hdev,
return 0;
}
+static int __maybe_unused lenovo_resume(struct hid_device *hdev)
+{
+ int ret;
+
+ switch (hdev->product) {
+ case USB_DEVICE_ID_LENOVO_CUSBKBD:
+ case USB_DEVICE_ID_LENOVO_CBTKBD:
+ case USB_DEVICE_ID_LENOVO_TPIIUSBKBD:
+ case USB_DEVICE_ID_LENOVO_TPIIBTKBD:
+ /* Switch middle button to native mode again */
+ ret = lenovo_send_cmd_cptkbd(hdev, 0x09, 0x01);
+ if (ret)
+ hid_warn(hdev, "Failed to switch middle button: %d\n",
+ ret);
+ break;
+ default:
+ ret = 0;
+ break;
+ }
+
+ return ret;
+}
static const struct hid_device_id lenovo_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPKBD) },
@@ -1380,6 +1402,9 @@ static struct hid_driver lenovo_driver = {
.raw_event = lenovo_raw_event,
.event = lenovo_event,
.report_fixup = lenovo_report_fixup,
+#ifdef CONFIG_PM
+ .reset_resume = lenovo_resume,
+#endif
};
module_hid_driver(lenovo_driver);