[v4] scripts/link-vmlinux.sh: Add alias to duplicate symbols for kallsyms

Message ID 20230919193948.465340-1-alessandro.carminati@gmail.com
State New
Headers
Series [v4] scripts/link-vmlinux.sh: Add alias to duplicate symbols for kallsyms |

Commit Message

Alessandro Carminati (Red Hat) Sept. 19, 2023, 7:39 p.m. UTC
  It is not uncommon for drivers or modules related to similar peripherals
to have symbols with the exact same name.
While this is not a problem for the kernel's binary itself, it becomes an
issue when attempting to trace or probe specific functions using
infrastructure like ftrace or kprobe.

The tracing subsystem relies on the `nm -n vmlinux` output, which provides
symbol information from the kernel's ELF binary. However, when multiple
symbols share the same name, the standard nm output does not differentiate
between them. This can lead to confusion and difficulty when trying to
probe the intended symbol.

 ~ # cat /proc/kallsyms | grep " name_show"
 ffffffff8c4f76d0 t name_show
 ffffffff8c9cccb0 t name_show
 ffffffff8cb0ac20 t name_show
 ffffffff8cc728c0 t name_show
 ffffffff8ce0efd0 t name_show
 ffffffff8ce126c0 t name_show
 ffffffff8ce1dd20 t name_show
 ffffffff8ce24e70 t name_show
 ffffffff8d1104c0 t name_show
 ffffffff8d1fe480 t name_show

kas_alias addresses this challenge by enhancing symbol names with
meaningful suffixes generated from the source file and line number
during the kernel build process.
These newly generated aliases provide tracers with the ability to
comprehend the symbols they are interacting with when utilizing the
ftracefs interface.
This approach may also allow for the probing by name of previously
inaccessible symbols.

 ~ # cat /proc/kallsyms | grep gic_mask_irq
 ffffd15671e505ac t gic_mask_irq
 ffffd15671e505ac t gic_mask_irq@drivers_irqchip_irq_gic_c_167
 ffffd15671e532a4 t gic_mask_irq
 ffffd15671e532a4 t gic_mask_irq@drivers_irqchip_irq_gic_v3_c_407
 ~ #

Changes from v1:
- Integrated changes requested by Masami to exclude symbols with prefixes
  "_cfi" and "_pfx".
- Introduced a small framework to handle patterns that need to be excluded
  from the alias production.
- Excluded other symbols using the framework.
- Introduced the ability to discriminate between text and data symbols.
- Added two new config symbols in this version: CONFIG_KALLSYMS_ALIAS_DATA,
  which allows data for data, and CONFIG_KALLSYMS_ALIAS_DATA_ALL, which
  excludes all filters and provides an alias for each duplicated symbol.

https://lore.kernel.org/all/20230711151925.1092080-1-alessandro.carminati@gmail.com/

Changes from v2:
- Alias tags are created by querying DWARF information from the vmlinux.
- The filename + line number is normalized and appended to the original
  name.
- The tag begins with '@' to indicate the symbol source.
- Not a change, but worth mentioning, since the alias is added to the
  existing list, the old duplicated name is preserved, and the livepatch
  way of dealing with duplicates is maintained.
- Acknowledging the existence of scenarios where inlined functions
  declared in header files may result in multiple copies due to compiler
  behavior, though it is not actionable as it does not pose an operational
  issue.
- Highlighting a single exception where the same name refers to different
  functions: the case of "compat_binfmt_elf.c," which directly includes
  "binfmt_elf.c" producing identical function copies in two separate
  modules.

https://lore.kernel.org/all/20230714150326.1152359-1-alessandro.carminati@gmail.com/

Changes from v3:
- kas_alias was rewritten in Python to create a more concise and
  maintainable codebase.
- The previous automation process used by kas_alias to locate the vmlinux
  and the addr2line has been replaced with an explicit command-line switch
  for specifying these requirements.
- addr2line has been added into the main Makefile.
- A new command-line switch has been introduced, enabling users to extend
  the alias to global data names.

https://lore.kernel.org/all/20230828080423.3539686-1-alessandro.carminati@gmail.com/

NOTE:
About the symbols name duplication that happens as consequence of the
inclusion compat_binfmt_elf.c does, it is evident that this corner is
inherently challenging the addr2line approach.
Attempting to conceal this limitation would be counterproductive.

compat_binfmt_elf.c includes directly binfmt_elf.c, addr2line can't help
but report all functions and data declared by that file, coming from
binfmt_elf.c.

My position is that, rather than producing a more complicated pipeline
to handle this corner case, it is better to fix the compat_binfmt_elf.c
anomaly.

This patch does not deal with the two potentially problematic symbols
defined by compat_binfmt_elf.c

Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
---
 Makefile                |   4 +-
 init/Kconfig            |  22 +++++++
 scripts/kas_alias.py    | 132 ++++++++++++++++++++++++++++++++++++++++
 scripts/link-vmlinux.sh |  20 +++++-
 4 files changed, 175 insertions(+), 3 deletions(-)
 create mode 100755 scripts/kas_alias.py
  

Comments

Masami Hiramatsu (Google) Sept. 19, 2023, 11:52 p.m. UTC | #1
On Tue, 19 Sep 2023 19:39:48 +0000
"Alessandro Carminati (Red Hat)" <alessandro.carminati@gmail.com> wrote:

> It is not uncommon for drivers or modules related to similar peripherals
> to have symbols with the exact same name.
> While this is not a problem for the kernel's binary itself, it becomes an
> issue when attempting to trace or probe specific functions using
> infrastructure like ftrace or kprobe.
> 
> The tracing subsystem relies on the `nm -n vmlinux` output, which provides
> symbol information from the kernel's ELF binary. However, when multiple
> symbols share the same name, the standard nm output does not differentiate
> between them. This can lead to confusion and difficulty when trying to
> probe the intended symbol.
> 
>  ~ # cat /proc/kallsyms | grep " name_show"
>  ffffffff8c4f76d0 t name_show
>  ffffffff8c9cccb0 t name_show
>  ffffffff8cb0ac20 t name_show
>  ffffffff8cc728c0 t name_show
>  ffffffff8ce0efd0 t name_show
>  ffffffff8ce126c0 t name_show
>  ffffffff8ce1dd20 t name_show
>  ffffffff8ce24e70 t name_show
>  ffffffff8d1104c0 t name_show
>  ffffffff8d1fe480 t name_show
> 
> kas_alias addresses this challenge by enhancing symbol names with
> meaningful suffixes generated from the source file and line number
> during the kernel build process.
> These newly generated aliases provide tracers with the ability to
> comprehend the symbols they are interacting with when utilizing the
> ftracefs interface.
> This approach may also allow for the probing by name of previously
> inaccessible symbols.
> 
>  ~ # cat /proc/kallsyms | grep gic_mask_irq
>  ffffd15671e505ac t gic_mask_irq
>  ffffd15671e505ac t gic_mask_irq@drivers_irqchip_irq_gic_c_167
>  ffffd15671e532a4 t gic_mask_irq
>  ffffd15671e532a4 t gic_mask_irq@drivers_irqchip_irq_gic_v3_c_407
>  ~ #
> 
> Changes from v1:
> - Integrated changes requested by Masami to exclude symbols with prefixes
>   "_cfi" and "_pfx".
> - Introduced a small framework to handle patterns that need to be excluded
>   from the alias production.
> - Excluded other symbols using the framework.
> - Introduced the ability to discriminate between text and data symbols.
> - Added two new config symbols in this version: CONFIG_KALLSYMS_ALIAS_DATA,
>   which allows data for data, and CONFIG_KALLSYMS_ALIAS_DATA_ALL, which
>   excludes all filters and provides an alias for each duplicated symbol.
> 
> https://lore.kernel.org/all/20230711151925.1092080-1-alessandro.carminati@gmail.com/
> 
> Changes from v2:
> - Alias tags are created by querying DWARF information from the vmlinux.
> - The filename + line number is normalized and appended to the original
>   name.
> - The tag begins with '@' to indicate the symbol source.
> - Not a change, but worth mentioning, since the alias is added to the
>   existing list, the old duplicated name is preserved, and the livepatch
>   way of dealing with duplicates is maintained.
> - Acknowledging the existence of scenarios where inlined functions
>   declared in header files may result in multiple copies due to compiler
>   behavior, though it is not actionable as it does not pose an operational
>   issue.
> - Highlighting a single exception where the same name refers to different
>   functions: the case of "compat_binfmt_elf.c," which directly includes
>   "binfmt_elf.c" producing identical function copies in two separate
>   modules.
> 
> https://lore.kernel.org/all/20230714150326.1152359-1-alessandro.carminati@gmail.com/
> 
> Changes from v3:
> - kas_alias was rewritten in Python to create a more concise and
>   maintainable codebase.
> - The previous automation process used by kas_alias to locate the vmlinux
>   and the addr2line has been replaced with an explicit command-line switch
>   for specifying these requirements.
> - addr2line has been added into the main Makefile.
> - A new command-line switch has been introduced, enabling users to extend
>   the alias to global data names.
> 
> https://lore.kernel.org/all/20230828080423.3539686-1-alessandro.carminati@gmail.com/
> 
> NOTE:
> About the symbols name duplication that happens as consequence of the
> inclusion compat_binfmt_elf.c does, it is evident that this corner is
> inherently challenging the addr2line approach.
> Attempting to conceal this limitation would be counterproductive.
> 
> compat_binfmt_elf.c includes directly binfmt_elf.c, addr2line can't help
> but report all functions and data declared by that file, coming from
> binfmt_elf.c.
> 
> My position is that, rather than producing a more complicated pipeline
> to handle this corner case, it is better to fix the compat_binfmt_elf.c
> anomaly.
> 
> This patch does not deal with the two potentially problematic symbols
> defined by compat_binfmt_elf.c

Hi, it looks good but if I build with O=<build dir>, I have this error.

/ksrc/linux/scripts/link-vmlinux.sh: 176: scripts/kas_alias.py: not found

Maybe something wrong with setting the path?

Thank you,

> 
> Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
> ---
>  Makefile                |   4 +-
>  init/Kconfig            |  22 +++++++
>  scripts/kas_alias.py    | 132 ++++++++++++++++++++++++++++++++++++++++
>  scripts/link-vmlinux.sh |  20 +++++-
>  4 files changed, 175 insertions(+), 3 deletions(-)
>  create mode 100755 scripts/kas_alias.py
> 
> diff --git a/Makefile b/Makefile
> index 4f283d915e54..f33c179f4cc3 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -488,6 +488,7 @@ OBJCOPY		= $(LLVM_PREFIX)llvm-objcopy$(LLVM_SUFFIX)
>  OBJDUMP		= $(LLVM_PREFIX)llvm-objdump$(LLVM_SUFFIX)
>  READELF		= $(LLVM_PREFIX)llvm-readelf$(LLVM_SUFFIX)
>  STRIP		= $(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX)
> +ADDR2LINE	= $(LLVM_PREFIX)llvm-addr2line$(LLVM_SUFFIX)
>  else
>  CC		= $(CROSS_COMPILE)gcc
>  LD		= $(CROSS_COMPILE)ld
> @@ -497,6 +498,7 @@ OBJCOPY		= $(CROSS_COMPILE)objcopy
>  OBJDUMP		= $(CROSS_COMPILE)objdump
>  READELF		= $(CROSS_COMPILE)readelf
>  STRIP		= $(CROSS_COMPILE)strip
> +ADDR2LINE	= $(CROSS_COMPILE)addr2line
>  endif
>  RUSTC		= rustc
>  RUSTDOC		= rustdoc
> @@ -611,7 +613,7 @@ export RUSTC_BOOTSTRAP := 1
>  export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG
>  export RUSTC RUSTDOC RUSTFMT RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN CARGO
>  export HOSTRUSTC KBUILD_HOSTRUSTFLAGS
> -export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
> +export CPP AR NM STRIP OBJCOPY OBJDUMP READELF ADDR2LINE PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
>  export PERL PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
>  export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD
>  export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
> diff --git a/init/Kconfig b/init/Kconfig
> index 6d35728b94b2..d45dd423e1ec 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -1738,6 +1738,28 @@ config KALLSYMS_BASE_RELATIVE
>  	  time constants, and no relocation pass is required at runtime to fix
>  	  up the entries based on the runtime load address of the kernel.
>  
> +config KALLSYMS_ALIAS_SRCLINE
> +	bool "Produces alias for duplicated text symbols" if EXPERT
> +	depends on KALLSYMS && DEBUG_INFO && !DEBUG_INFO_SPLIT
> +	help
> +	  It is not uncommon for drivers or modules related to similar
> +	  peripherals to have symbols with the exact same name.
> +	  While this is not a problem for the kernel's binary itself, it
> +	  becomes an issue when attempting to trace or probe specific
> +	  functions using infrastructure like ftrace or kprobe.
> +
> +	  This option addresses this challenge, producing alias for text
> +	  symbol names that include the file name and line where the symbols
> +	  are defined in the source code.
> +
> +config KALLSYMS_ALIAS_SRCLINE_DATA
> +	bool "Produces alias also for global variables names"
> +	depends on KALLSYMS_ALIAS_SRCLINE
> +	help
> +	  Sometimes it can be useful to refer to global vars by name. Since
> +	  they suffer the same issue as text symbols, this config option
> +	  allows having aliases for global variables names too.
> +
>  # end of the "standard kernel features (expert users)" menu
>  
>  # syscall, maps, verifier
> diff --git a/scripts/kas_alias.py b/scripts/kas_alias.py
> new file mode 100755
> index 000000000000..8cc2a2178da6
> --- /dev/null
> +++ b/scripts/kas_alias.py
> @@ -0,0 +1,132 @@
> +#!/usr/bin/env python3
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Copyright (C) 2023 Red Hat, Inc. Alessandro Carminati <alessandro.carminati@gmail.com>
> +#
> +# kas_alias: Adds alias to duplicate symbols in the kallsyms output.
> +
> +import subprocess
> +import sys
> +import os
> +import argparse
> +import re
> +from collections import namedtuple
> +
> +regex_filter = [
> +        "^__compound_literal\\.[0-9]+$",
> +        "^__[wm]*key\\.[0-9]+$",
> +        "^_*TRACE_SYSTEM.*$",
> +        "^__already_done\\.[0-9]+$",
> +        "^__msg\\.[0-9]+$",
> +        "^__func__\\.[0-9]+$",
> +        "^CSWTCH\\.[0-9]+$",
> +        "^_rs\\.[0-9]+$",
> +        "^___tp_str\\.[0-9]+$",
> +        "^__flags\\.[0-9]+$",
> +        "^___done\\.[0-9]+$",
> +        "^__print_once\\.[0-9]+$",
> +        "^___once_key\\.[0-9]+$",
> +        "^__pfx_.*$",
> +        "^__cfi_.*$"
> +        ]
> +
> +class SeparatorType:
> +    def __call__(self, separator):
> +        if len(separator) != 1:
> +            raise argparse.ArgumentTypeError("Separator must be a single character")
> +        return separator
> +
> +Line = namedtuple('Line', ['address', 'type', 'name'])
> +
> +def parse_file(filename):
> +    symbol_list = []
> +    name_occurrences = {}
> +
> +    with open(filename, 'r') as file:
> +        for line in file:
> +            fields = line.strip().split()
> +
> +            if len(fields) >= 3:
> +                address, type, name = fields[0], fields[1], ' '.join(fields[2:])
> +                symbol_list.append(Line(address, type, name))
> +                name_occurrences[name] = name_occurrences.get(name, 0) + 1
> +
> +    return symbol_list, name_occurrences
> +
> +def find_duplicate(symbol_list, name_occurrences):
> +    name_to_lines = {}
> +    duplicate_lines = []
> +
> +    for line in symbol_list:
> +        if line.name in name_to_lines:
> +            first_occurrence = name_to_lines[line.name]
> +            duplicate_lines.extend([first_occurrence, line])
> +        else:
> +            name_to_lines[line.name] = line
> +
> +    return duplicate_lines
> +
> +def start_addr2line_process(binary_file, addr2line_file):
> +    try:
> +        addr2line_process = subprocess.Popen([addr2line_file, '-fe', binary_file],
> +                                             stdin=subprocess.PIPE,
> +                                             stdout=subprocess.PIPE,
> +                                             stderr=subprocess.PIPE,
> +                                             text=True)
> +        return addr2line_process
> +    except Exception as e:
> +        print(f"Error starting addr2line process: {str(e)}")
> +        return None
> +
> +def addr2line_fetch_address(addr2line_process, address):
> +    try:
> +        addr2line_process.stdin.write(address + '\n')
> +        addr2line_process.stdin.flush()
> +        addr2line_process.stdout.readline().strip()
> +        output = addr2line_process.stdout.readline().strip()
> +
> +        return os.path.normpath(output)
> +    except Exception as e:
> +        print(f"Error communicating with addr2line: {str(e)}")
> +        return None
> +
> +def process_line(line, config):
> +    if config:
> +        return not (any(re.match(regex, obj.name) for regex in regex_filter))
> +    else:
> +        return obj.type in {"T", "t"}
> +
> +if __name__ == "__main__":
> +    parser = argparse.ArgumentParser(description='Add alias to multiple occurring symbols name in kallsyms')
> +    parser.add_argument('-a', "--addr2line", dest="addr2line_file", required=True)
> +    parser.add_argument('-v', "--vmlinux", dest="vmlinux_file", required=True)
> +    parser.add_argument('-o', "--outfile", dest="output_file", required=True)
> +    parser.add_argument('-n', "--nmdata", dest="nm_data_file", required=True)
> +    parser.add_argument('-s', "--separator", dest="separator", required=False, default="@", type=SeparatorType())
> +    parser.add_argument('-d', "--data", dest="include_data", required=False, action='store_true')
> +    config = parser.parse_args()
> +
> +    try:
> +        config.linux_base_dir = os.getcwd()+"/"
> +        symbol_list, name_occurrences = parse_file(config.nm_data_file)
> +        addr2line_process = start_addr2line_process(config.vmlinux_file, config.addr2line_file)
> +
> +        with open(config.output_file, 'w') as file:
> +            for obj in symbol_list:
> +                file.write("{} {} {}\n".format(obj.address, obj.type, obj.name))
> +                if (name_occurrences[obj.name] > 1) and process_line(obj, config.include_data) :
> +                    output = addr2line_fetch_address(addr2line_process, obj.address)
> +                    decoration = config.separator + "".join(
> +                        "_" if not c.isalnum() else c for c in output.replace(config.linux_base_dir, "")
> +                    )
> +                    if decoration != config.separator + "____":
> +                        file.write("{} {} {}\n".format(obj.address, obj.type, obj.name + decoration))
> +
> +        addr2line_process.stdin.close()
> +        addr2line_process.stdout.close()
> +        addr2line_process.stderr.close()
> +        addr2line_process.wait()
> +
> +    except Exception as e:
> +        print(f"An error occurred: {str(e)}")
> +        raise SystemExit("Script terminated due to an error")
> diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
> index a432b171be82..7cc24fd5f6b4 100755
> --- a/scripts/link-vmlinux.sh
> +++ b/scripts/link-vmlinux.sh
> @@ -91,7 +91,12 @@ vmlinux_link()
>  
>  	# The kallsyms linking does not need debug symbols included.
>  	if [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
> -		ldflags="${ldflags} ${wl}--strip-debug"
> +		# The kallsyms linking does not need debug symbols included,
> +		# unless the KALLSYMS_ALIAS_SRCLINE.
> +		if ! is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE && \
> +		   [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
> +			ldflags="${ldflags} ${wl}--strip-debug"
> +		fi
>  	fi
>  
>  	if is_enabled CONFIG_VMLINUX_MAP; then
> @@ -161,7 +166,18 @@ kallsyms()
>  	fi
>  
>  	info KSYMS ${2}
> -	scripts/kallsyms ${kallsymopt} ${1} > ${2}
> +	ALIAS=""
> +	KAS_DATA=""
> +	if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE_DATA; then
> +		KAS_DATA="-d"
> +	fi
> +	if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE; then
> +		ALIAS=".alias"
> +		scripts/kas_alias.py \
> +			-a ${ADDR2LINE} -v ${kallsyms_vmlinux} -n ${1} \
> +			-o ${1}${ALIAS} -s @ ${KAS_DATA}
> +	fi
> +	scripts/kallsyms ${kallsymopt} ${1}${ALIAS} > ${2}
>  }
>  
>  # Perform one step in kallsyms generation, including temporary linking of
> -- 
> 2.34.1
>
  
Alessandro Carminati (Red Hat) Sept. 20, 2023, 7:39 a.m. UTC | #2
Hello Masami,

Thank you for the feedback.


Il giorno mer 20 set 2023 alle ore 01:52 Masami Hiramatsu
<mhiramat@kernel.org> ha scritto:
>
> On Tue, 19 Sep 2023 19:39:48 +0000
> "Alessandro Carminati (Red Hat)" <alessandro.carminati@gmail.com> wrote:
>
> > It is not uncommon for drivers or modules related to similar peripherals
> > to have symbols with the exact same name.
> > While this is not a problem for the kernel's binary itself, it becomes an
> > issue when attempting to trace or probe specific functions using
> > infrastructure like ftrace or kprobe.
> >
> > The tracing subsystem relies on the `nm -n vmlinux` output, which provides
> > symbol information from the kernel's ELF binary. However, when multiple
> > symbols share the same name, the standard nm output does not differentiate
> > between them. This can lead to confusion and difficulty when trying to
> > probe the intended symbol.
> >
> >  ~ # cat /proc/kallsyms | grep " name_show"
> >  ffffffff8c4f76d0 t name_show
> >  ffffffff8c9cccb0 t name_show
> >  ffffffff8cb0ac20 t name_show
> >  ffffffff8cc728c0 t name_show
> >  ffffffff8ce0efd0 t name_show
> >  ffffffff8ce126c0 t name_show
> >  ffffffff8ce1dd20 t name_show
> >  ffffffff8ce24e70 t name_show
> >  ffffffff8d1104c0 t name_show
> >  ffffffff8d1fe480 t name_show
> >
> > kas_alias addresses this challenge by enhancing symbol names with
> > meaningful suffixes generated from the source file and line number
> > during the kernel build process.
> > These newly generated aliases provide tracers with the ability to
> > comprehend the symbols they are interacting with when utilizing the
> > ftracefs interface.
> > This approach may also allow for the probing by name of previously
> > inaccessible symbols.
> >
> >  ~ # cat /proc/kallsyms | grep gic_mask_irq
> >  ffffd15671e505ac t gic_mask_irq
> >  ffffd15671e505ac t gic_mask_irq@drivers_irqchip_irq_gic_c_167
> >  ffffd15671e532a4 t gic_mask_irq
> >  ffffd15671e532a4 t gic_mask_irq@drivers_irqchip_irq_gic_v3_c_407
> >  ~ #
> >
> > Changes from v1:
> > - Integrated changes requested by Masami to exclude symbols with prefixes
> >   "_cfi" and "_pfx".
> > - Introduced a small framework to handle patterns that need to be excluded
> >   from the alias production.
> > - Excluded other symbols using the framework.
> > - Introduced the ability to discriminate between text and data symbols.
> > - Added two new config symbols in this version: CONFIG_KALLSYMS_ALIAS_DATA,
> >   which allows data for data, and CONFIG_KALLSYMS_ALIAS_DATA_ALL, which
> >   excludes all filters and provides an alias for each duplicated symbol.
> >
> > https://lore.kernel.org/all/20230711151925.1092080-1-alessandro.carminati@gmail.com/
> >
> > Changes from v2:
> > - Alias tags are created by querying DWARF information from the vmlinux.
> > - The filename + line number is normalized and appended to the original
> >   name.
> > - The tag begins with '@' to indicate the symbol source.
> > - Not a change, but worth mentioning, since the alias is added to the
> >   existing list, the old duplicated name is preserved, and the livepatch
> >   way of dealing with duplicates is maintained.
> > - Acknowledging the existence of scenarios where inlined functions
> >   declared in header files may result in multiple copies due to compiler
> >   behavior, though it is not actionable as it does not pose an operational
> >   issue.
> > - Highlighting a single exception where the same name refers to different
> >   functions: the case of "compat_binfmt_elf.c," which directly includes
> >   "binfmt_elf.c" producing identical function copies in two separate
> >   modules.
> >
> > https://lore.kernel.org/all/20230714150326.1152359-1-alessandro.carminati@gmail.com/
> >
> > Changes from v3:
> > - kas_alias was rewritten in Python to create a more concise and
> >   maintainable codebase.
> > - The previous automation process used by kas_alias to locate the vmlinux
> >   and the addr2line has been replaced with an explicit command-line switch
> >   for specifying these requirements.
> > - addr2line has been added into the main Makefile.
> > - A new command-line switch has been introduced, enabling users to extend
> >   the alias to global data names.
> >
> > https://lore.kernel.org/all/20230828080423.3539686-1-alessandro.carminati@gmail.com/
> >
> > NOTE:
> > About the symbols name duplication that happens as consequence of the
> > inclusion compat_binfmt_elf.c does, it is evident that this corner is
> > inherently challenging the addr2line approach.
> > Attempting to conceal this limitation would be counterproductive.
> >
> > compat_binfmt_elf.c includes directly binfmt_elf.c, addr2line can't help
> > but report all functions and data declared by that file, coming from
> > binfmt_elf.c.
> >
> > My position is that, rather than producing a more complicated pipeline
> > to handle this corner case, it is better to fix the compat_binfmt_elf.c
> > anomaly.
> >
> > This patch does not deal with the two potentially problematic symbols
> > defined by compat_binfmt_elf.c
>
> Hi, it looks good but if I build with O=<build dir>, I have this error.
>
> /ksrc/linux/scripts/link-vmlinux.sh: 176: scripts/kas_alias.py: not found
>
> Maybe something wrong with setting the path?

You're spot on.
Switching from C to Python for kas_alias has this little quirk where it
doesn't end up in the target script directory anymore. So, if you're using
a specific target build directory, you'll have to hunt down the script in
the source tree. I'll sort this out once I've collected all the feedback.

Regards
Alessandro
  
Francis Laniel Sept. 20, 2023, 10:53 a.m. UTC | #3
Hi.

Le mardi 19 septembre 2023, 22:39:48 EEST Alessandro Carminati (Red Hat) a 
écrit :
> It is not uncommon for drivers or modules related to similar peripherals
> to have symbols with the exact same name.
> While this is not a problem for the kernel's binary itself, it becomes an
> issue when attempting to trace or probe specific functions using
> infrastructure like ftrace or kprobe.
> 
> The tracing subsystem relies on the `nm -n vmlinux` output, which provides
> symbol information from the kernel's ELF binary. However, when multiple
> symbols share the same name, the standard nm output does not differentiate
> between them. This can lead to confusion and difficulty when trying to
> probe the intended symbol.
> 
>  ~ # cat /proc/kallsyms | grep " name_show"
>  ffffffff8c4f76d0 t name_show
>  ffffffff8c9cccb0 t name_show
>  ffffffff8cb0ac20 t name_show
>  ffffffff8cc728c0 t name_show
>  ffffffff8ce0efd0 t name_show
>  ffffffff8ce126c0 t name_show
>  ffffffff8ce1dd20 t name_show
>  ffffffff8ce24e70 t name_show
>  ffffffff8d1104c0 t name_show
>  ffffffff8d1fe480 t name_show
> 
> kas_alias addresses this challenge by enhancing symbol names with
> meaningful suffixes generated from the source file and line number
> during the kernel build process.
> These newly generated aliases provide tracers with the ability to
> comprehend the symbols they are interacting with when utilizing the
> ftracefs interface.
> This approach may also allow for the probing by name of previously
> inaccessible symbols.
> 
>  ~ # cat /proc/kallsyms | grep gic_mask_irq
>  ffffd15671e505ac t gic_mask_irq
>  ffffd15671e505ac t gic_mask_irq@drivers_irqchip_irq_gic_c_167
>  ffffd15671e532a4 t gic_mask_irq
>  ffffd15671e532a4 t gic_mask_irq@drivers_irqchip_irq_gic_v3_c_407
>  ~ #
> 
> Changes from v1:
> - Integrated changes requested by Masami to exclude symbols with prefixes
>   "_cfi" and "_pfx".
> - Introduced a small framework to handle patterns that need to be excluded
>   from the alias production.
> - Excluded other symbols using the framework.
> - Introduced the ability to discriminate between text and data symbols.
> - Added two new config symbols in this version: CONFIG_KALLSYMS_ALIAS_DATA,
>   which allows data for data, and CONFIG_KALLSYMS_ALIAS_DATA_ALL, which
>   excludes all filters and provides an alias for each duplicated symbol.
> 
> https://lore.kernel.org/all/20230711151925.1092080-1-alessandro.carminati@gm
> ail.com/
> 
> Changes from v2:
> - Alias tags are created by querying DWARF information from the vmlinux.
> - The filename + line number is normalized and appended to the original
>   name.
> - The tag begins with '@' to indicate the symbol source.
> - Not a change, but worth mentioning, since the alias is added to the
>   existing list, the old duplicated name is preserved, and the livepatch
>   way of dealing with duplicates is maintained.
> - Acknowledging the existence of scenarios where inlined functions
>   declared in header files may result in multiple copies due to compiler
>   behavior, though it is not actionable as it does not pose an operational
>   issue.
> - Highlighting a single exception where the same name refers to different
>   functions: the case of "compat_binfmt_elf.c," which directly includes
>   "binfmt_elf.c" producing identical function copies in two separate
>   modules.
> 
> https://lore.kernel.org/all/20230714150326.1152359-1-alessandro.carminati@gm
> ail.com/
> 
> Changes from v3:
> - kas_alias was rewritten in Python to create a more concise and
>   maintainable codebase.
> - The previous automation process used by kas_alias to locate the vmlinux
>   and the addr2line has been replaced with an explicit command-line switch
>   for specifying these requirements.
> - addr2line has been added into the main Makefile.
> - A new command-line switch has been introduced, enabling users to extend
>   the alias to global data names.
> 
> https://lore.kernel.org/all/20230828080423.3539686-1-alessandro.carminati@gm
> ail.com/
> 
> NOTE:
> About the symbols name duplication that happens as consequence of the
> inclusion compat_binfmt_elf.c does, it is evident that this corner is
> inherently challenging the addr2line approach.
> Attempting to conceal this limitation would be counterproductive.
> 
> compat_binfmt_elf.c includes directly binfmt_elf.c, addr2line can't help
> but report all functions and data declared by that file, coming from
> binfmt_elf.c.
> 
> My position is that, rather than producing a more complicated pipeline
> to handle this corner case, it is better to fix the compat_binfmt_elf.c
> anomaly.
> 
> This patch does not deal with the two potentially problematic symbols
> defined by compat_binfmt_elf.c

First, thank you for the v4, you will find in the remaining of the messages 
some comments but for now, I did not test it (this is planned).
On a general way, using python really helps here as the code is more 
straightforward, thank you for this change.

Regarding the problem with compat_binfmt_elf.c, do you have any idea on how to 
address it?
I can maybe take a look at it but I would like to avoid breaking everything.

> Signed-off-by: Alessandro Carminati (Red Hat)
> <alessandro.carminati@gmail.com> ---
>  Makefile                |   4 +-
>  init/Kconfig            |  22 +++++++
>  scripts/kas_alias.py    | 132 ++++++++++++++++++++++++++++++++++++++++
>  scripts/link-vmlinux.sh |  20 +++++-
>  4 files changed, 175 insertions(+), 3 deletions(-)
>  create mode 100755 scripts/kas_alias.py
> 
> diff --git a/Makefile b/Makefile
> index 4f283d915e54..f33c179f4cc3 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -488,6 +488,7 @@ OBJCOPY		= $(LLVM_PREFIX)llvm-objcopy$
(LLVM_SUFFIX)
>  OBJDUMP		= $(LLVM_PREFIX)llvm-objdump$(LLVM_SUFFIX)
>  READELF		= $(LLVM_PREFIX)llvm-readelf$(LLVM_SUFFIX)
>  STRIP		= $(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX)
> +ADDR2LINE	= $(LLVM_PREFIX)llvm-addr2line$(LLVM_SUFFIX)
>  else
>  CC		= $(CROSS_COMPILE)gcc
>  LD		= $(CROSS_COMPILE)ld
> @@ -497,6 +498,7 @@ OBJCOPY		= $(CROSS_COMPILE)objcopy
>  OBJDUMP		= $(CROSS_COMPILE)objdump
>  READELF		= $(CROSS_COMPILE)readelf
>  STRIP		= $(CROSS_COMPILE)strip
> +ADDR2LINE	= $(CROSS_COMPILE)addr2line
>  endif
>  RUSTC		= rustc
>  RUSTDOC		= rustdoc
> @@ -611,7 +613,7 @@ export RUSTC_BOOTSTRAP := 1
>  export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS
> CROSS_COMPILE LD CC HOSTPKG_CONFIG export RUSTC RUSTDOC RUSTFMT
> RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN CARGO export HOSTRUSTC
> KBUILD_HOSTRUSTFLAGS
> -export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX
> YACC AWK INSTALLKERNEL +export CPP AR NM STRIP OBJCOPY OBJDUMP READELF
> ADDR2LINE PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL export PERL
> PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
>  export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD
>  export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
> LDFLAGS_MODULE diff --git a/init/Kconfig b/init/Kconfig
> index 6d35728b94b2..d45dd423e1ec 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -1738,6 +1738,28 @@ config KALLSYMS_BASE_RELATIVE
>  	  time constants, and no relocation pass is required at runtime to fix
>  	  up the entries based on the runtime load address of the kernel.
> 
> +config KALLSYMS_ALIAS_SRCLINE
> +	bool "Produces alias for duplicated text symbols" if EXPERT
> +	depends on KALLSYMS && DEBUG_INFO && !DEBUG_INFO_SPLIT
> +	help
> +	  It is not uncommon for drivers or modules related to similar
> +	  peripherals to have symbols with the exact same name.
> +	  While this is not a problem for the kernel's binary itself, it
> +	  becomes an issue when attempting to trace or probe specific
> +	  functions using infrastructure like ftrace or kprobe.
> +
> +	  This option addresses this challenge, producing alias for text
> +	  symbol names that include the file name and line where the symbols
> +	  are defined in the source code.
> +
> +config KALLSYMS_ALIAS_SRCLINE_DATA
> +	bool "Produces alias also for global variables names"
> +	depends on KALLSYMS_ALIAS_SRCLINE
> +	help
> +	  Sometimes it can be useful to refer to global vars by name. Since
> +	  they suffer the same issue as text symbols, this config option
> +	  allows having aliases for global variables names too.
> +
>  # end of the "standard kernel features (expert users)" menu
> 
>  # syscall, maps, verifier
> diff --git a/scripts/kas_alias.py b/scripts/kas_alias.py
> new file mode 100755
> index 000000000000..8cc2a2178da6
> --- /dev/null
> +++ b/scripts/kas_alias.py
> @@ -0,0 +1,132 @@
> +#!/usr/bin/env python3
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Copyright (C) 2023 Red Hat, Inc. Alessandro Carminati
> <alessandro.carminati@gmail.com> +#
> +# kas_alias: Adds alias to duplicate symbols in the kallsyms output.
> +
> +import subprocess
> +import sys
> +import os
> +import argparse
> +import re
> +from collections import namedtuple
> +
> +regex_filter = [
> +        "^__compound_literal\\.[0-9]+$",
> +        "^__[wm]*key\\.[0-9]+$",
> +        "^_*TRACE_SYSTEM.*$",
> +        "^__already_done\\.[0-9]+$",
> +        "^__msg\\.[0-9]+$",
> +        "^__func__\\.[0-9]+$",
> +        "^CSWTCH\\.[0-9]+$",
> +        "^_rs\\.[0-9]+$",
> +        "^___tp_str\\.[0-9]+$",
> +        "^__flags\\.[0-9]+$",
> +        "^___done\\.[0-9]+$",
> +        "^__print_once\\.[0-9]+$",
> +        "^___once_key\\.[0-9]+$",
> +        "^__pfx_.*$",
> +        "^__cfi_.*$"
> +        ]
> +
> +class SeparatorType:
> +    def __call__(self, separator):
> +        if len(separator) != 1:
> +            raise argparse.ArgumentTypeError("Separator must be a single
> character") +        return separator
> +
> +Line = namedtuple('Line', ['address', 'type', 'name'])
> +
> +def parse_file(filename):
> +    symbol_list = []
> +    name_occurrences = {}
> +
> +    with open(filename, 'r') as file:
> +        for line in file:
> +            fields = line.strip().split()
> +
> +            if len(fields) >= 3:
> +                address, type, name = fields[0], fields[1], '
> '.join(fields[2:]) +                symbol_list.append(Line(address, type,
> name))
> +                name_occurrences[name] = name_occurrences.get(name, 0) + 1
> +
> +    return symbol_list, name_occurrences
> +
> +def find_duplicate(symbol_list, name_occurrences):
> +    name_to_lines = {}
> +    duplicate_lines = []
> +
> +    for line in symbol_list:
> +        if line.name in name_to_lines:
> +            first_occurrence = name_to_lines[line.name]
> +            duplicate_lines.extend([first_occurrence, line])
> +        else:
> +            name_to_lines[line.name] = line
> +
> +    return duplicate_lines
> +
> +def start_addr2line_process(binary_file, addr2line_file):
> +    try:
> +        addr2line_process = subprocess.Popen([addr2line_file, '-fe',
> binary_file], +                                            
> stdin=subprocess.PIPE, +                                            
> stdout=subprocess.PIPE, +                                            
> stderr=subprocess.PIPE, +                                            
> text=True)
> +        return addr2line_process
> +    except Exception as e:
> +        print(f"Error starting addr2line process: {str(e)}")
> +        return None

Here, you can raise another exception, otherwise this error message will be 
printed on stdout as you use print().

> +
> +def addr2line_fetch_address(addr2line_process, address):
> +    try:
> +        addr2line_process.stdin.write(address + '\n')
> +        addr2line_process.stdin.flush()
> +        addr2line_process.stdout.readline().strip()
> +        output = addr2line_process.stdout.readline().strip()
> +
> +        return os.path.normpath(output)
> +    except Exception as e:
> +        print(f"Error communicating with addr2line: {str(e)}")
> +        return None

Same comment than above.

> +def process_line(line, config):

line should be named obj here.

> +    if config:
> +        return not (any(re.match(regex, obj.name) for regex in
> regex_filter)) +    else:
> +        return obj.type in {"T", "t"}
> +if __name__ == "__main__":
> +    parser = argparse.ArgumentParser(description='Add alias to multiple
> occurring symbols name in kallsyms') +    parser.add_argument('-a',
> "--addr2line", dest="addr2line_file", required=True) +   
> parser.add_argument('-v', "--vmlinux", dest="vmlinux_file", required=True)
> +    parser.add_argument('-o', "--outfile", dest="output_file",
> required=True) +    parser.add_argument('-n', "--nmdata",
> dest="nm_data_file", required=True) +    parser.add_argument('-s',
> "--separator", dest="separator", required=False, default="@",
> type=SeparatorType()) +    parser.add_argument('-d', "--data",
> dest="include_data", required=False, action='store_true') +    config =
> parser.parse_args()
> +
> +    try:
> +        config.linux_base_dir = os.getcwd()+"/"
> +        symbol_list, name_occurrences = parse_file(config.nm_data_file)
> +        addr2line_process = start_addr2line_process(config.vmlinux_file,
> config.addr2line_file) +
> +        with open(config.output_file, 'w') as file:
> +            for obj in symbol_list:
> +                file.write("{} {} {}\n".format(obj.address, obj.type,
> obj.name)) 

I am not a python expert but is there something which prevents using f-string 
here?

> +                if (name_occurrences[obj.name] > 1) and
> process_line(obj, config.include_data) : +                    output =
> addr2line_fetch_address(addr2line_process, obj.address) +                  
>  decoration = config.separator + "".join(
> +                        "_" if not c.isalnum() else c for c in
> output.replace(config.linux_base_dir, "") +                    )

Cannot the above be simplified to:
decoration = config.separator + config.linux_base_dir + ("_" if not c.isalnum() 
else c for c in output)

> +                    if decoration != config.separator + "____":

Why exactly "____" and not "_+" (+ in the regex meaning of {1, n})?

> +                        file.write("{} {} {}\n".format(obj.address,
> obj.type, obj.name + decoration)) +
> +        addr2line_process.stdin.close()
> +        addr2line_process.stdout.close()
> +        addr2line_process.stderr.close()
> +        addr2line_process.wait()
> +
> +    except Exception as e:
> +        print(f"An error occurred: {str(e)}")
> +        raise SystemExit("Script terminated due to an error")

Maybe you can fuse the two:
raise SystemExit(f"Script terminated due to an error: {str(e)}")

> diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
> index a432b171be82..7cc24fd5f6b4 100755
> --- a/scripts/link-vmlinux.sh
> +++ b/scripts/link-vmlinux.sh
> @@ -91,7 +91,12 @@ vmlinux_link()
> 
>  	# The kallsyms linking does not need debug symbols included.
>  	if [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
> -		ldflags="${ldflags} ${wl}--strip-debug"
> +		# The kallsyms linking does not need debug symbols included,
> +		# unless the KALLSYMS_ALIAS_SRCLINE.
> +		if ! is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE && \
> +		   [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
> +			ldflags="${ldflags} ${wl}--strip-debug"
> +		fi
>  	fi
> 
>  	if is_enabled CONFIG_VMLINUX_MAP; then
> @@ -161,7 +166,18 @@ kallsyms()
>  	fi
> 
>  	info KSYMS ${2}
> -	scripts/kallsyms ${kallsymopt} ${1} > ${2}
> +	ALIAS=""
> +	KAS_DATA=""
> +	if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE_DATA; then
> +		KAS_DATA="-d"
> +	fi
> +	if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE; then
> +		ALIAS=".alias"
> +		scripts/kas_alias.py \
> +			-a ${ADDR2LINE} -v ${kallsyms_vmlinux} -n ${1} \
> +			-o ${1}${ALIAS} -s @ ${KAS_DATA}

The separator can indeed be set for the python script but is hardcoded from 
the kernel point of view as there are no corresponding CONFIG_.
This is totally fine for me, as if someone wants a specific separator he/she can 
edit this file, but was it your goal?

> +	fi
> +	scripts/kallsyms ${kallsymopt} ${1}${ALIAS} > ${2}
>  }
> 
>  # Perform one step in kallsyms generation, including temporary linking of

Best regards.
  
Alessandro Carminati (Red Hat) Sept. 20, 2023, 6:04 p.m. UTC | #4
Hello Francis,

Thanks a lot for the review.

Il giorno mer 20 set 2023 alle ore 12:53 Francis Laniel
<flaniel@linux.microsoft.com> ha scritto:
>
> Hi.
>
> Le mardi 19 septembre 2023, 22:39:48 EEST Alessandro Carminati (Red Hat) a
> écrit :
> > It is not uncommon for drivers or modules related to similar peripherals
> > to have symbols with the exact same name.
> > While this is not a problem for the kernel's binary itself, it becomes an
> > issue when attempting to trace or probe specific functions using
> > infrastructure like ftrace or kprobe.
> >
> > The tracing subsystem relies on the `nm -n vmlinux` output, which provides
> > symbol information from the kernel's ELF binary. However, when multiple
> > symbols share the same name, the standard nm output does not differentiate
> > between them. This can lead to confusion and difficulty when trying to
> > probe the intended symbol.
> >
> >  ~ # cat /proc/kallsyms | grep " name_show"
> >  ffffffff8c4f76d0 t name_show
> >  ffffffff8c9cccb0 t name_show
> >  ffffffff8cb0ac20 t name_show
> >  ffffffff8cc728c0 t name_show
> >  ffffffff8ce0efd0 t name_show
> >  ffffffff8ce126c0 t name_show
> >  ffffffff8ce1dd20 t name_show
> >  ffffffff8ce24e70 t name_show
> >  ffffffff8d1104c0 t name_show
> >  ffffffff8d1fe480 t name_show
> >
> > kas_alias addresses this challenge by enhancing symbol names with
> > meaningful suffixes generated from the source file and line number
> > during the kernel build process.
> > These newly generated aliases provide tracers with the ability to
> > comprehend the symbols they are interacting with when utilizing the
> > ftracefs interface.
> > This approach may also allow for the probing by name of previously
> > inaccessible symbols.
> >
> >  ~ # cat /proc/kallsyms | grep gic_mask_irq
> >  ffffd15671e505ac t gic_mask_irq
> >  ffffd15671e505ac t gic_mask_irq@drivers_irqchip_irq_gic_c_167
> >  ffffd15671e532a4 t gic_mask_irq
> >  ffffd15671e532a4 t gic_mask_irq@drivers_irqchip_irq_gic_v3_c_407
> >  ~ #
> >
> > Changes from v1:
> > - Integrated changes requested by Masami to exclude symbols with prefixes
> >   "_cfi" and "_pfx".
> > - Introduced a small framework to handle patterns that need to be excluded
> >   from the alias production.
> > - Excluded other symbols using the framework.
> > - Introduced the ability to discriminate between text and data symbols.
> > - Added two new config symbols in this version: CONFIG_KALLSYMS_ALIAS_DATA,
> >   which allows data for data, and CONFIG_KALLSYMS_ALIAS_DATA_ALL, which
> >   excludes all filters and provides an alias for each duplicated symbol.
> >
> > https://lore.kernel.org/all/20230711151925.1092080-1-alessandro.carminati@gm
> > ail.com/
> >
> > Changes from v2:
> > - Alias tags are created by querying DWARF information from the vmlinux.
> > - The filename + line number is normalized and appended to the original
> >   name.
> > - The tag begins with '@' to indicate the symbol source.
> > - Not a change, but worth mentioning, since the alias is added to the
> >   existing list, the old duplicated name is preserved, and the livepatch
> >   way of dealing with duplicates is maintained.
> > - Acknowledging the existence of scenarios where inlined functions
> >   declared in header files may result in multiple copies due to compiler
> >   behavior, though it is not actionable as it does not pose an operational
> >   issue.
> > - Highlighting a single exception where the same name refers to different
> >   functions: the case of "compat_binfmt_elf.c," which directly includes
> >   "binfmt_elf.c" producing identical function copies in two separate
> >   modules.
> >
> > https://lore.kernel.org/all/20230714150326.1152359-1-alessandro.carminati@gm
> > ail.com/
> >
> > Changes from v3:
> > - kas_alias was rewritten in Python to create a more concise and
> >   maintainable codebase.
> > - The previous automation process used by kas_alias to locate the vmlinux
> >   and the addr2line has been replaced with an explicit command-line switch
> >   for specifying these requirements.
> > - addr2line has been added into the main Makefile.
> > - A new command-line switch has been introduced, enabling users to extend
> >   the alias to global data names.
> >
> > https://lore.kernel.org/all/20230828080423.3539686-1-alessandro.carminati@gm
> > ail.com/
> >
> > NOTE:
> > About the symbols name duplication that happens as consequence of the
> > inclusion compat_binfmt_elf.c does, it is evident that this corner is
> > inherently challenging the addr2line approach.
> > Attempting to conceal this limitation would be counterproductive.
> >
> > compat_binfmt_elf.c includes directly binfmt_elf.c, addr2line can't help
> > but report all functions and data declared by that file, coming from
> > binfmt_elf.c.
> >
> > My position is that, rather than producing a more complicated pipeline
> > to handle this corner case, it is better to fix the compat_binfmt_elf.c
> > anomaly.
> >
> > This patch does not deal with the two potentially problematic symbols
> > defined by compat_binfmt_elf.c
>
> First, thank you for the v4, you will find in the remaining of the messages
> some comments but for now, I did not test it (this is planned).
> On a general way, using python really helps here as the code is more
> straightforward, thank you for this change.
>
> Regarding the problem with compat_binfmt_elf.c, do you have any idea on how to
> address it?
> I can maybe take a look at it but I would like to avoid breaking everything.

compat_binfmt_elf.c is a clever hack that enables sharing source code
between two different modules while allowing for command differences through
config macros [1] [2].
The key lies in the fact they have only few differences.

In my view, a good approach would be to refactor both compat_binfmt_elf.c and
binfmt_elf.c, extracting common code and accessing it through wrappers.
This way, anyone looking to explore the functionality provided by either module
would have distinct symbols to work with.
Consolidating the two functions into one also seems beneficial, including in
contexts like livepatch scenarios.

The trade-off here is that the modifications currently made using macros would
need to be done at runtime.
Fortunately, from what I see in the code, these changes appear to be relatively
modest, and the functions don't seem to be critical loops.
Therefore, sacrificing a few cycles to evaluate a flag doesn't appear to be a
game-changer.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/fs/binfmt_elf.c#n754
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/fs/binfmt_elf.c#n1317

>
> > Signed-off-by: Alessandro Carminati (Red Hat)
> > <alessandro.carminati@gmail.com> ---
> >  Makefile                |   4 +-
> >  init/Kconfig            |  22 +++++++
> >  scripts/kas_alias.py    | 132 ++++++++++++++++++++++++++++++++++++++++
> >  scripts/link-vmlinux.sh |  20 +++++-
> >  4 files changed, 175 insertions(+), 3 deletions(-)
> >  create mode 100755 scripts/kas_alias.py
> >
> > diff --git a/Makefile b/Makefile
> > index 4f283d915e54..f33c179f4cc3 100644
> > --- a/Makefile
> > +++ b/Makefile
> > @@ -488,6 +488,7 @@ OBJCOPY           = $(LLVM_PREFIX)llvm-objcopy$
> (LLVM_SUFFIX)
> >  OBJDUMP              = $(LLVM_PREFIX)llvm-objdump$(LLVM_SUFFIX)
> >  READELF              = $(LLVM_PREFIX)llvm-readelf$(LLVM_SUFFIX)
> >  STRIP                = $(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX)
> > +ADDR2LINE    = $(LLVM_PREFIX)llvm-addr2line$(LLVM_SUFFIX)
> >  else
> >  CC           = $(CROSS_COMPILE)gcc
> >  LD           = $(CROSS_COMPILE)ld
> > @@ -497,6 +498,7 @@ OBJCOPY           = $(CROSS_COMPILE)objcopy
> >  OBJDUMP              = $(CROSS_COMPILE)objdump
> >  READELF              = $(CROSS_COMPILE)readelf
> >  STRIP                = $(CROSS_COMPILE)strip
> > +ADDR2LINE    = $(CROSS_COMPILE)addr2line
> >  endif
> >  RUSTC                = rustc
> >  RUSTDOC              = rustdoc
> > @@ -611,7 +613,7 @@ export RUSTC_BOOTSTRAP := 1
> >  export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS
> > CROSS_COMPILE LD CC HOSTPKG_CONFIG export RUSTC RUSTDOC RUSTFMT
> > RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN CARGO export HOSTRUSTC
> > KBUILD_HOSTRUSTFLAGS
> > -export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX
> > YACC AWK INSTALLKERNEL +export CPP AR NM STRIP OBJCOPY OBJDUMP READELF
> > ADDR2LINE PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL export PERL
> > PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
> >  export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD
> >  export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
> > LDFLAGS_MODULE diff --git a/init/Kconfig b/init/Kconfig
> > index 6d35728b94b2..d45dd423e1ec 100644
> > --- a/init/Kconfig
> > +++ b/init/Kconfig
> > @@ -1738,6 +1738,28 @@ config KALLSYMS_BASE_RELATIVE
> >         time constants, and no relocation pass is required at runtime to fix
> >         up the entries based on the runtime load address of the kernel.
> >
> > +config KALLSYMS_ALIAS_SRCLINE
> > +     bool "Produces alias for duplicated text symbols" if EXPERT
> > +     depends on KALLSYMS && DEBUG_INFO && !DEBUG_INFO_SPLIT
> > +     help
> > +       It is not uncommon for drivers or modules related to similar
> > +       peripherals to have symbols with the exact same name.
> > +       While this is not a problem for the kernel's binary itself, it
> > +       becomes an issue when attempting to trace or probe specific
> > +       functions using infrastructure like ftrace or kprobe.
> > +
> > +       This option addresses this challenge, producing alias for text
> > +       symbol names that include the file name and line where the symbols
> > +       are defined in the source code.
> > +
> > +config KALLSYMS_ALIAS_SRCLINE_DATA
> > +     bool "Produces alias also for global variables names"
> > +     depends on KALLSYMS_ALIAS_SRCLINE
> > +     help
> > +       Sometimes it can be useful to refer to global vars by name. Since
> > +       they suffer the same issue as text symbols, this config option
> > +       allows having aliases for global variables names too.
> > +
> >  # end of the "standard kernel features (expert users)" menu
> >
> >  # syscall, maps, verifier
> > diff --git a/scripts/kas_alias.py b/scripts/kas_alias.py
> > new file mode 100755
> > index 000000000000..8cc2a2178da6
> > --- /dev/null
> > +++ b/scripts/kas_alias.py
> > @@ -0,0 +1,132 @@
> > +#!/usr/bin/env python3
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +#
> > +# Copyright (C) 2023 Red Hat, Inc. Alessandro Carminati
> > <alessandro.carminati@gmail.com> +#
> > +# kas_alias: Adds alias to duplicate symbols in the kallsyms output.
> > +
> > +import subprocess
> > +import sys
> > +import os
> > +import argparse
> > +import re
> > +from collections import namedtuple
> > +
> > +regex_filter = [
> > +        "^__compound_literal\\.[0-9]+$",
> > +        "^__[wm]*key\\.[0-9]+$",
> > +        "^_*TRACE_SYSTEM.*$",
> > +        "^__already_done\\.[0-9]+$",
> > +        "^__msg\\.[0-9]+$",
> > +        "^__func__\\.[0-9]+$",
> > +        "^CSWTCH\\.[0-9]+$",
> > +        "^_rs\\.[0-9]+$",
> > +        "^___tp_str\\.[0-9]+$",
> > +        "^__flags\\.[0-9]+$",
> > +        "^___done\\.[0-9]+$",
> > +        "^__print_once\\.[0-9]+$",
> > +        "^___once_key\\.[0-9]+$",
> > +        "^__pfx_.*$",
> > +        "^__cfi_.*$"
> > +        ]
> > +
> > +class SeparatorType:
> > +    def __call__(self, separator):
> > +        if len(separator) != 1:
> > +            raise argparse.ArgumentTypeError("Separator must be a single
> > character") +        return separator
> > +
> > +Line = namedtuple('Line', ['address', 'type', 'name'])
> > +
> > +def parse_file(filename):
> > +    symbol_list = []
> > +    name_occurrences = {}
> > +
> > +    with open(filename, 'r') as file:
> > +        for line in file:
> > +            fields = line.strip().split()
> > +
> > +            if len(fields) >= 3:
> > +                address, type, name = fields[0], fields[1], '
> > '.join(fields[2:]) +                symbol_list.append(Line(address, type,
> > name))
> > +                name_occurrences[name] = name_occurrences.get(name, 0) + 1
> > +
> > +    return symbol_list, name_occurrences
> > +
> > +def find_duplicate(symbol_list, name_occurrences):
> > +    name_to_lines = {}
> > +    duplicate_lines = []
> > +
> > +    for line in symbol_list:
> > +        if line.name in name_to_lines:
> > +            first_occurrence = name_to_lines[line.name]
> > +            duplicate_lines.extend([first_occurrence, line])
> > +        else:
> > +            name_to_lines[line.name] = line
> > +
> > +    return duplicate_lines
> > +
> > +def start_addr2line_process(binary_file, addr2line_file):
> > +    try:
> > +        addr2line_process = subprocess.Popen([addr2line_file, '-fe',
> > binary_file], +
> > stdin=subprocess.PIPE, +
> > stdout=subprocess.PIPE, +
> > stderr=subprocess.PIPE, +
> > text=True)
> > +        return addr2line_process
> > +    except Exception as e:
> > +        print(f"Error starting addr2line process: {str(e)}")
> > +        return None
>
> Here, you can raise another exception, otherwise this error message will be
> printed on stdout as you use print().
>
> > +
> > +def addr2line_fetch_address(addr2line_process, address):
> > +    try:
> > +        addr2line_process.stdin.write(address + '\n')
> > +        addr2line_process.stdin.flush()
> > +        addr2line_process.stdout.readline().strip()
> > +        output = addr2line_process.stdout.readline().strip()
> > +
> > +        return os.path.normpath(output)
> > +    except Exception as e:
> > +        print(f"Error communicating with addr2line: {str(e)}")
> > +        return None
>
> Same comment than above.
>
Hmm, you might be onto something there.
The issue here is that I probably shouldn't return at all and should just
go ahead and terminate the program. I mean, if I hit this exception, it
means I couldn't spawn addr2line or fetch results from it.
In that case, I can't provide the functionality anyway.
When I initially wrote the function, my idea was to prevent the kernel
build pipeline from failing completely by taking the input and pushing it
to the output (even though the application wouldn't provide the
functionality).
But now I started thinking about it from the perspective of a user who
really needs that functionality.
Despite having to enable it, it does not present itself.
That way I'm just complicating the debug.

I came to the conclusion that it's best to just crash the application and
halt the pipeline if either of the two fails.
I will change it accordingly.

> > +def process_line(line, config):
>
> line should be named obj here.
fair.
>
> > +    if config:
> > +        return not (any(re.match(regex, obj.name) for regex in
> > regex_filter)) +    else:
> > +        return obj.type in {"T", "t"}
> > +if __name__ == "__main__":
> > +    parser = argparse.ArgumentParser(description='Add alias to multiple
> > occurring symbols name in kallsyms') +    parser.add_argument('-a',
> > "--addr2line", dest="addr2line_file", required=True) +
> > parser.add_argument('-v', "--vmlinux", dest="vmlinux_file", required=True)
> > +    parser.add_argument('-o', "--outfile", dest="output_file",
> > required=True) +    parser.add_argument('-n', "--nmdata",
> > dest="nm_data_file", required=True) +    parser.add_argument('-s',
> > "--separator", dest="separator", required=False, default="@",
> > type=SeparatorType()) +    parser.add_argument('-d', "--data",
> > dest="include_data", required=False, action='store_true') +    config =
> > parser.parse_args()
> > +
> > +    try:
> > +        config.linux_base_dir = os.getcwd()+"/"
> > +        symbol_list, name_occurrences = parse_file(config.nm_data_file)
> > +        addr2line_process = start_addr2line_process(config.vmlinux_file,
> > config.addr2line_file) +
> > +        with open(config.output_file, 'w') as file:
> > +            for obj in symbol_list:
> > +                file.write("{} {} {}\n".format(obj.address, obj.type,
> > obj.name))
>
> I am not a python expert but is there something which prevents using f-string
> here?
Agree, best to have a single style.
>
> > +                if (name_occurrences[obj.name] > 1) and
> > process_line(obj, config.include_data) : +                    output =
> > addr2line_fetch_address(addr2line_process, obj.address) +
> >  decoration = config.separator + "".join(
> > +                        "_" if not c.isalnum() else c for c in
> > output.replace(config.linux_base_dir, "") +                    )
>
> Cannot the above be simplified to:
> decoration = config.separator + config.linux_base_dir + ("_" if not c.isalnum()
> else c for c in output)
>
> > +                    if decoration != config.separator + "____":
>
> Why exactly "____" and not "_+" (+ in the regex meaning of {1, n})?
The reason for using "____" is because when addr2line emits the special
string "?:??" its normalized version becomes "____" .
"?:??" occurs when addr2line can not find the specified address in the
DWARF section, which is typical of symbols introduced by the compiler.
In such cases, emitting an alias wouldn't make sense, so I skip it.
>
> > +                        file.write("{} {} {}\n".format(obj.address,
> > obj.type, obj.name + decoration)) +
> > +        addr2line_process.stdin.close()
> > +        addr2line_process.stdout.close()
> > +        addr2line_process.stderr.close()
> > +        addr2line_process.wait()
> > +
> > +    except Exception as e:
> > +        print(f"An error occurred: {str(e)}")
> > +        raise SystemExit("Script terminated due to an error")
>
> Maybe you can fuse the two:
> raise SystemExit(f"Script terminated due to an error: {str(e)}")
Got it, thanks
>
> > diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
> > index a432b171be82..7cc24fd5f6b4 100755
> > --- a/scripts/link-vmlinux.sh
> > +++ b/scripts/link-vmlinux.sh
> > @@ -91,7 +91,12 @@ vmlinux_link()
> >
> >       # The kallsyms linking does not need debug symbols included.
> >       if [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
> > -             ldflags="${ldflags} ${wl}--strip-debug"
> > +             # The kallsyms linking does not need debug symbols included,
> > +             # unless the KALLSYMS_ALIAS_SRCLINE.
> > +             if ! is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE && \
> > +                [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
> > +                     ldflags="${ldflags} ${wl}--strip-debug"
> > +             fi
> >       fi
> >
> >       if is_enabled CONFIG_VMLINUX_MAP; then
> > @@ -161,7 +166,18 @@ kallsyms()
> >       fi
> >
> >       info KSYMS ${2}
> > -     scripts/kallsyms ${kallsymopt} ${1} > ${2}
> > +     ALIAS=""
> > +     KAS_DATA=""
> > +     if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE_DATA; then
> > +             KAS_DATA="-d"
> > +     fi
> > +     if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE; then
> > +             ALIAS=".alias"
> > +             scripts/kas_alias.py \
> > +                     -a ${ADDR2LINE} -v ${kallsyms_vmlinux} -n ${1} \
> > +                     -o ${1}${ALIAS} -s @ ${KAS_DATA}
>
> The separator can indeed be set for the python script but is hardcoded from
> the kernel point of view as there are no corresponding CONFIG_.
> This is totally fine for me, as if someone wants a specific separator he/she can
> edit this file, but was it your goal?
Indeed.
While your earlier point made sense to me, Petr's arguments were quite
convincing.
So, the kernel does hardcode the separator, but if someone really wants
to change it, they can simply edit a character in the
scripts/link-vmlinux.sh file.
>
> > +     fi
> > +     scripts/kallsyms ${kallsymopt} ${1}${ALIAS} > ${2}
> >  }
> >
> >  # Perform one step in kallsyms generation, including temporary linking of
>
> Best regards.
>
>
  
Francis Laniel Sept. 21, 2023, 11:48 a.m. UTC | #5
Hi.

Le mercredi 20 septembre 2023, 21:04:42 EEST Alessandro Carminati a écrit :
> Hello Francis,
> 
> Thanks a lot for the review.

You are welcome.
I also tested it and it works well:
root@vm-amd64:~# grep ' name_show' /proc/kallsyms | head -6
ffffffff810fa070 t name_show
ffffffff810fa070 t name_show@kernel_irq_irqdesc_c_264
ffffffff815e67c0 t name_show
ffffffff815e67c0 t name_show@drivers_pnp_card_c_186
ffffffff81728bb0 t name_show
ffffffff81728bb0 t name_show@drivers_gpu_drm_i915_gt_sysfs_engines_c_26

> Il giorno mer 20 set 2023 alle ore 12:53 Francis Laniel
> 
> <flaniel@linux.microsoft.com> ha scritto:
> > Hi.
> > 
> > Le mardi 19 septembre 2023, 22:39:48 EEST Alessandro Carminati (Red Hat) a
> > 
> > écrit :
> > > It is not uncommon for drivers or modules related to similar peripherals
> > > to have symbols with the exact same name.
> > > While this is not a problem for the kernel's binary itself, it becomes
> > > an
> > > issue when attempting to trace or probe specific functions using
> > > infrastructure like ftrace or kprobe.
> > > 
> > > The tracing subsystem relies on the `nm -n vmlinux` output, which
> > > provides
> > > symbol information from the kernel's ELF binary. However, when multiple
> > > symbols share the same name, the standard nm output does not
> > > differentiate
> > > between them. This can lead to confusion and difficulty when trying to
> > > probe the intended symbol.
> > > 
> > >  ~ # cat /proc/kallsyms | grep " name_show"
> > >  ffffffff8c4f76d0 t name_show
> > >  ffffffff8c9cccb0 t name_show
> > >  ffffffff8cb0ac20 t name_show
> > >  ffffffff8cc728c0 t name_show
> > >  ffffffff8ce0efd0 t name_show
> > >  ffffffff8ce126c0 t name_show
> > >  ffffffff8ce1dd20 t name_show
> > >  ffffffff8ce24e70 t name_show
> > >  ffffffff8d1104c0 t name_show
> > >  ffffffff8d1fe480 t name_show
> > > 
> > > kas_alias addresses this challenge by enhancing symbol names with
> > > meaningful suffixes generated from the source file and line number
> > > during the kernel build process.
> > > These newly generated aliases provide tracers with the ability to
> > > comprehend the symbols they are interacting with when utilizing the
> > > ftracefs interface.
> > > This approach may also allow for the probing by name of previously
> > > inaccessible symbols.
> > > 
> > >  ~ # cat /proc/kallsyms | grep gic_mask_irq
> > >  ffffd15671e505ac t gic_mask_irq
> > >  ffffd15671e505ac t gic_mask_irq@drivers_irqchip_irq_gic_c_167
> > >  ffffd15671e532a4 t gic_mask_irq
> > >  ffffd15671e532a4 t gic_mask_irq@drivers_irqchip_irq_gic_v3_c_407
> > >  ~ #
> > > 
> > > Changes from v1:
> > > - Integrated changes requested by Masami to exclude symbols with
> > > prefixes
> > > 
> > >   "_cfi" and "_pfx".
> > > 
> > > - Introduced a small framework to handle patterns that need to be
> > > excluded
> > > 
> > >   from the alias production.
> > > 
> > > - Excluded other symbols using the framework.
> > > - Introduced the ability to discriminate between text and data symbols.
> > > - Added two new config symbols in this version:
> > > CONFIG_KALLSYMS_ALIAS_DATA,
> > > 
> > >   which allows data for data, and CONFIG_KALLSYMS_ALIAS_DATA_ALL, which
> > >   excludes all filters and provides an alias for each duplicated symbol.
> > > 
> > > https://lore.kernel.org/all/20230711151925.1092080-1-alessandro.carminat
> > > i@gm ail.com/
> > > 
> > > Changes from v2:
> > > - Alias tags are created by querying DWARF information from the vmlinux.
> > > - The filename + line number is normalized and appended to the original
> > > 
> > >   name.
> > > 
> > > - The tag begins with '@' to indicate the symbol source.
> > > - Not a change, but worth mentioning, since the alias is added to the
> > > 
> > >   existing list, the old duplicated name is preserved, and the livepatch
> > >   way of dealing with duplicates is maintained.
> > > 
> > > - Acknowledging the existence of scenarios where inlined functions
> > > 
> > >   declared in header files may result in multiple copies due to compiler
> > >   behavior, though it is not actionable as it does not pose an
> > >   operational
> > >   issue.
> > > 
> > > - Highlighting a single exception where the same name refers to
> > > different
> > > 
> > >   functions: the case of "compat_binfmt_elf.c," which directly includes
> > >   "binfmt_elf.c" producing identical function copies in two separate
> > >   modules.
> > > 
> > > https://lore.kernel.org/all/20230714150326.1152359-1-alessandro.carminat
> > > i@gm ail.com/
> > > 
> > > Changes from v3:
> > > - kas_alias was rewritten in Python to create a more concise and
> > > 
> > >   maintainable codebase.
> > > 
> > > - The previous automation process used by kas_alias to locate the
> > > vmlinux
> > > 
> > >   and the addr2line has been replaced with an explicit command-line
> > >   switch
> > >   for specifying these requirements.
> > > 
> > > - addr2line has been added into the main Makefile.
> > > - A new command-line switch has been introduced, enabling users to
> > > extend
> > > 
> > >   the alias to global data names.
> > > 
> > > https://lore.kernel.org/all/20230828080423.3539686-1-alessandro.carminat
> > > i@gm ail.com/
> > > 
> > > NOTE:
> > > About the symbols name duplication that happens as consequence of the
> > > inclusion compat_binfmt_elf.c does, it is evident that this corner is
> > > inherently challenging the addr2line approach.
> > > Attempting to conceal this limitation would be counterproductive.
> > > 
> > > compat_binfmt_elf.c includes directly binfmt_elf.c, addr2line can't help
> > > but report all functions and data declared by that file, coming from
> > > binfmt_elf.c.
> > > 
> > > My position is that, rather than producing a more complicated pipeline
> > > to handle this corner case, it is better to fix the compat_binfmt_elf.c
> > > anomaly.
> > > 
> > > This patch does not deal with the two potentially problematic symbols
> > > defined by compat_binfmt_elf.c
> > 
> > First, thank you for the v4, you will find in the remaining of the
> > messages
> > some comments but for now, I did not test it (this is planned).
> > On a general way, using python really helps here as the code is more
> > straightforward, thank you for this change.
> > 
> > Regarding the problem with compat_binfmt_elf.c, do you have any idea on
> > how to address it?
> > I can maybe take a look at it but I would like to avoid breaking
> > everything.
> compat_binfmt_elf.c is a clever hack that enables sharing source code
> between two different modules while allowing for command differences through
> config macros [1] [2].
> The key lies in the fact they have only few differences.
> 
> In my view, a good approach would be to refactor both compat_binfmt_elf.c
> and binfmt_elf.c, extracting common code and accessing it through wrappers.
> This way, anyone looking to explore the functionality provided by either
> module would have distinct symbols to work with.
> Consolidating the two functions into one also seems beneficial, including in
> contexts like livepatch scenarios.
> 
> The trade-off here is that the modifications currently made using macros
> would need to be done at runtime.
> Fortunately, from what I see in the code, these changes appear to be
> relatively modest, and the functions don't seem to be critical loops.
> Therefore, sacrificing a few cycles to evaluate a flag doesn't appear to be
> a game-changer.

Thank you for all this information, I will take a deeper look at it but cannot 
guarantee I will come back with something.

> [1]
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/fs/
> binfmt_elf.c#n754 [2]
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/fs/
> binfmt_elf.c#n1317
> > > Signed-off-by: Alessandro Carminati (Red Hat)
> > > <alessandro.carminati@gmail.com> ---
> > > 
> > >  Makefile                |   4 +-
> > >  init/Kconfig            |  22 +++++++
> > >  scripts/kas_alias.py    | 132 ++++++++++++++++++++++++++++++++++++++++
> > >  scripts/link-vmlinux.sh |  20 +++++-
> > >  4 files changed, 175 insertions(+), 3 deletions(-)
> > >  create mode 100755 scripts/kas_alias.py
> > > 
> > > diff --git a/Makefile b/Makefile
> > > index 4f283d915e54..f33c179f4cc3 100644
> > > --- a/Makefile
> > > +++ b/Makefile
> > > @@ -488,6 +488,7 @@ OBJCOPY           = $(LLVM_PREFIX)llvm-objcopy$
> > 
> > (LLVM_SUFFIX)
> > 
> > >  OBJDUMP              = $(LLVM_PREFIX)llvm-objdump$(LLVM_SUFFIX)
> > >  READELF              = $(LLVM_PREFIX)llvm-readelf$(LLVM_SUFFIX)
> > >  STRIP                = $(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX)
> > > 
> > > +ADDR2LINE    = $(LLVM_PREFIX)llvm-addr2line$(LLVM_SUFFIX)
> > > 
> > >  else
> > >  CC           = $(CROSS_COMPILE)gcc
> > >  LD           = $(CROSS_COMPILE)ld
> > > 
> > > @@ -497,6 +498,7 @@ OBJCOPY           = $(CROSS_COMPILE)objcopy
> > > 
> > >  OBJDUMP              = $(CROSS_COMPILE)objdump
> > >  READELF              = $(CROSS_COMPILE)readelf
> > >  STRIP                = $(CROSS_COMPILE)strip
> > > 
> > > +ADDR2LINE    = $(CROSS_COMPILE)addr2line
> > > 
> > >  endif
> > >  RUSTC                = rustc
> > >  RUSTDOC              = rustdoc
> > > 
> > > @@ -611,7 +613,7 @@ export RUSTC_BOOTSTRAP := 1
> > > 
> > >  export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS
> > > 
> > > CROSS_COMPILE LD CC HOSTPKG_CONFIG export RUSTC RUSTDOC RUSTFMT
> > > RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN CARGO export HOSTRUSTC
> > > KBUILD_HOSTRUSTFLAGS
> > > -export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS
> > > LEX
> > > YACC AWK INSTALLKERNEL +export CPP AR NM STRIP OBJCOPY OBJDUMP READELF
> > > ADDR2LINE PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL export PERL
> > > PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
> > > 
> > >  export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD
> > >  export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
> > > 
> > > LDFLAGS_MODULE diff --git a/init/Kconfig b/init/Kconfig
> > > index 6d35728b94b2..d45dd423e1ec 100644
> > > --- a/init/Kconfig
> > > +++ b/init/Kconfig
> > > @@ -1738,6 +1738,28 @@ config KALLSYMS_BASE_RELATIVE
> > > 
> > >         time constants, and no relocation pass is required at runtime to
> > >         fix
> > >         up the entries based on the runtime load address of the kernel.
> > > 
> > > +config KALLSYMS_ALIAS_SRCLINE
> > > +     bool "Produces alias for duplicated text symbols" if EXPERT
> > > +     depends on KALLSYMS && DEBUG_INFO && !DEBUG_INFO_SPLIT
> > > +     help
> > > +       It is not uncommon for drivers or modules related to similar
> > > +       peripherals to have symbols with the exact same name.
> > > +       While this is not a problem for the kernel's binary itself, it
> > > +       becomes an issue when attempting to trace or probe specific
> > > +       functions using infrastructure like ftrace or kprobe.
> > > +
> > > +       This option addresses this challenge, producing alias for text
> > > +       symbol names that include the file name and line where the
> > > symbols
> > > +       are defined in the source code.
> > > +
> > > +config KALLSYMS_ALIAS_SRCLINE_DATA
> > > +     bool "Produces alias also for global variables names"
> > > +     depends on KALLSYMS_ALIAS_SRCLINE
> > > +     help
> > > +       Sometimes it can be useful to refer to global vars by name.
> > > Since
> > > +       they suffer the same issue as text symbols, this config option
> > > +       allows having aliases for global variables names too.
> > > +
> > > 
> > >  # end of the "standard kernel features (expert users)" menu
> > >  
> > >  # syscall, maps, verifier
> > > 
> > > diff --git a/scripts/kas_alias.py b/scripts/kas_alias.py
> > > new file mode 100755
> > > index 000000000000..8cc2a2178da6
> > > --- /dev/null
> > > +++ b/scripts/kas_alias.py
> > > @@ -0,0 +1,132 @@
> > > +#!/usr/bin/env python3
> > > +# SPDX-License-Identifier: GPL-2.0-only
> > > +#
> > > +# Copyright (C) 2023 Red Hat, Inc. Alessandro Carminati
> > > <alessandro.carminati@gmail.com> +#
> > > +# kas_alias: Adds alias to duplicate symbols in the kallsyms output.
> > > +
> > > +import subprocess
> > > +import sys
> > > +import os
> > > +import argparse
> > > +import re
> > > +from collections import namedtuple
> > > +
> > > +regex_filter = [
> > > +        "^__compound_literal\\.[0-9]+$",
> > > +        "^__[wm]*key\\.[0-9]+$",
> > > +        "^_*TRACE_SYSTEM.*$",
> > > +        "^__already_done\\.[0-9]+$",
> > > +        "^__msg\\.[0-9]+$",
> > > +        "^__func__\\.[0-9]+$",
> > > +        "^CSWTCH\\.[0-9]+$",
> > > +        "^_rs\\.[0-9]+$",
> > > +        "^___tp_str\\.[0-9]+$",
> > > +        "^__flags\\.[0-9]+$",
> > > +        "^___done\\.[0-9]+$",
> > > +        "^__print_once\\.[0-9]+$",
> > > +        "^___once_key\\.[0-9]+$",
> > > +        "^__pfx_.*$",
> > > +        "^__cfi_.*$"
> > > +        ]
> > > +
> > > +class SeparatorType:
> > > +    def __call__(self, separator):
> > > +        if len(separator) != 1:
> > > +            raise argparse.ArgumentTypeError("Separator must be a
> > > single
> > > character") +        return separator
> > > +
> > > +Line = namedtuple('Line', ['address', 'type', 'name'])
> > > +
> > > +def parse_file(filename):
> > > +    symbol_list = []
> > > +    name_occurrences = {}
> > > +
> > > +    with open(filename, 'r') as file:
> > > +        for line in file:
> > > +            fields = line.strip().split()
> > > +
> > > +            if len(fields) >= 3:
> > > +                address, type, name = fields[0], fields[1], '
> > > '.join(fields[2:]) +                symbol_list.append(Line(address,
> > > type,
> > > name))
> > > +                name_occurrences[name] = name_occurrences.get(name, 0)
> > > + 1
> > > +
> > > +    return symbol_list, name_occurrences
> > > +
> > > +def find_duplicate(symbol_list, name_occurrences):
> > > +    name_to_lines = {}
> > > +    duplicate_lines = []
> > > +
> > > +    for line in symbol_list:
> > > +        if line.name in name_to_lines:
> > > +            first_occurrence = name_to_lines[line.name]
> > > +            duplicate_lines.extend([first_occurrence, line])
> > > +        else:
> > > +            name_to_lines[line.name] = line
> > > +
> > > +    return duplicate_lines
> > > +
> > > +def start_addr2line_process(binary_file, addr2line_file):
> > > +    try:
> > > +        addr2line_process = subprocess.Popen([addr2line_file, '-fe',
> > > binary_file], +
> > > stdin=subprocess.PIPE, +
> > > stdout=subprocess.PIPE, +
> > > stderr=subprocess.PIPE, +
> > > text=True)
> > > +        return addr2line_process
> > > +    except Exception as e:
> > > +        print(f"Error starting addr2line process: {str(e)}")
> > > +        return None
> > 
> > Here, you can raise another exception, otherwise this error message will
> > be
> > printed on stdout as you use print().
> > 
> > > +
> > > +def addr2line_fetch_address(addr2line_process, address):
> > > +    try:
> > > +        addr2line_process.stdin.write(address + '\n')
> > > +        addr2line_process.stdin.flush()
> > > +        addr2line_process.stdout.readline().strip()
> > > +        output = addr2line_process.stdout.readline().strip()
> > > +
> > > +        return os.path.normpath(output)
> > > +    except Exception as e:
> > > +        print(f"Error communicating with addr2line: {str(e)}")
> > > +        return None
> > 
> > Same comment than above.
> 
> Hmm, you might be onto something there.
> The issue here is that I probably shouldn't return at all and should just
> go ahead and terminate the program. I mean, if I hit this exception, it
> means I couldn't spawn addr2line or fetch results from it.
> In that case, I can't provide the functionality anyway.
> When I initially wrote the function, my idea was to prevent the kernel
> build pipeline from failing completely by taking the input and pushing it
> to the output (even though the application wouldn't provide the
> functionality).
> But now I started thinking about it from the perspective of a user who
> really needs that functionality.
> Despite having to enable it, it does not present itself.
> That way I'm just complicating the debug.
> 
> I came to the conclusion that it's best to just crash the application and
> halt the pipeline if either of the two fails.
> I will change it accordingly.
> 
> > > +def process_line(line, config):
> > line should be named obj here.
> 
> fair.
> 
> > > +    if config:
> > > +        return not (any(re.match(regex, obj.name) for regex in
> > > regex_filter)) +    else:
> > > +        return obj.type in {"T", "t"}
> > > +if __name__ == "__main__":
> > > +    parser = argparse.ArgumentParser(description='Add alias to multiple
> > > occurring symbols name in kallsyms') +    parser.add_argument('-a',
> > > "--addr2line", dest="addr2line_file", required=True) +
> > > parser.add_argument('-v', "--vmlinux", dest="vmlinux_file",
> > > required=True)
> > > +    parser.add_argument('-o', "--outfile", dest="output_file",
> > > required=True) +    parser.add_argument('-n', "--nmdata",
> > > dest="nm_data_file", required=True) +    parser.add_argument('-s',
> > > "--separator", dest="separator", required=False, default="@",
> > > type=SeparatorType()) +    parser.add_argument('-d', "--data",
> > > dest="include_data", required=False, action='store_true') +    config =
> > > parser.parse_args()
> > > +
> > > +    try:
> > > +        config.linux_base_dir = os.getcwd()+"/"
> > > +        symbol_list, name_occurrences = parse_file(config.nm_data_file)
> > > +        addr2line_process =
> > > start_addr2line_process(config.vmlinux_file,
> > > config.addr2line_file) +
> > > +        with open(config.output_file, 'w') as file:
> > > +            for obj in symbol_list:
> > > +                file.write("{} {} {}\n".format(obj.address, obj.type,
> > > obj.name))
> > 
> > I am not a python expert but is there something which prevents using
> > f-string here?
> 
> Agree, best to have a single style.
> 
> > > +                if (name_occurrences[obj.name] > 1) and
> > > process_line(obj, config.include_data) : +                    output =
> > > addr2line_fetch_address(addr2line_process, obj.address) +
> > > 
> > >  decoration = config.separator + "".join(
> > > 
> > > +                        "_" if not c.isalnum() else c for c in
> > > output.replace(config.linux_base_dir, "") +                    )
> > 
> > Cannot the above be simplified to:
> > decoration = config.separator + config.linux_base_dir + ("_" if not
> > c.isalnum() else c for c in output)
> > 
> > > +                    if decoration != config.separator + "____":
> > Why exactly "____" and not "_+" (+ in the regex meaning of {1, n})?
> 
> The reason for using "____" is because when addr2line emits the special
> string "?:??" its normalized version becomes "____" .
> "?:??" occurs when addr2line can not find the specified address in the
> DWARF section, which is typical of symbols introduced by the compiler.
> In such cases, emitting an alias wouldn't make sense, so I skip it.

OK, this makes sense!
I am wondering nonetheless what do you think about adding a comment which 
would indicate that "____" is the translation of "?:??"? This would be useful 
for people, like me, who does not have a great knowledge about addr2line.

> > > +                        file.write("{} {} {}\n".format(obj.address,
> > > obj.type, obj.name + decoration)) +
> > > +        addr2line_process.stdin.close()
> > > +        addr2line_process.stdout.close()
> > > +        addr2line_process.stderr.close()
> > > +        addr2line_process.wait()
> > > +
> > > +    except Exception as e:
> > > +        print(f"An error occurred: {str(e)}")
> > > +        raise SystemExit("Script terminated due to an error")
> > 
> > Maybe you can fuse the two:
> > raise SystemExit(f"Script terminated due to an error: {str(e)}")
> 
> Got it, thanks
> 
> > > diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
> > > index a432b171be82..7cc24fd5f6b4 100755
> > > --- a/scripts/link-vmlinux.sh
> > > +++ b/scripts/link-vmlinux.sh
> > > @@ -91,7 +91,12 @@ vmlinux_link()
> > > 
> > >       # The kallsyms linking does not need debug symbols included.
> > >       if [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
> > > 
> > > -             ldflags="${ldflags} ${wl}--strip-debug"
> > > +             # The kallsyms linking does not need debug symbols
> > > included,
> > > +             # unless the KALLSYMS_ALIAS_SRCLINE.
> > > +             if ! is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE && \
> > > +                [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ;
> > > then
> > > +                     ldflags="${ldflags} ${wl}--strip-debug"
> > > +             fi
> > > 
> > >       fi
> > >       
> > >       if is_enabled CONFIG_VMLINUX_MAP; then
> > > 
> > > @@ -161,7 +166,18 @@ kallsyms()
> > > 
> > >       fi
> > >       
> > >       info KSYMS ${2}
> > > 
> > > -     scripts/kallsyms ${kallsymopt} ${1} > ${2}
> > > +     ALIAS=""
> > > +     KAS_DATA=""
> > > +     if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE_DATA; then
> > > +             KAS_DATA="-d"
> > > +     fi
> > > +     if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE; then
> > > +             ALIAS=".alias"
> > > +             scripts/kas_alias.py \
> > > +                     -a ${ADDR2LINE} -v ${kallsyms_vmlinux} -n ${1} \
> > > +                     -o ${1}${ALIAS} -s @ ${KAS_DATA}
> > 
> > The separator can indeed be set for the python script but is hardcoded
> > from
> > the kernel point of view as there are no corresponding CONFIG_.
> > This is totally fine for me, as if someone wants a specific separator
> > he/she can edit this file, but was it your goal?
> 
> Indeed.
> While your earlier point made sense to me, Petr's arguments were quite
> convincing.
> So, the kernel does hardcode the separator, but if someone really wants
> to change it, they can simply edit a character in the
> scripts/link-vmlinux.sh file.

I totally agree with Petr's comment.
I think adding a format or other complicated stuff is just a remix of "the 
highway to hell is paved with good intentions".
So better to let it as it, and expert users can just edit the script.

> > > +     fi
> > > +     scripts/kallsyms ${kallsymopt} ${1}${ALIAS} > ${2}
> > > 
> > >  }
> > >  
> > >  # Perform one step in kallsyms generation, including temporary linking
> > >  of
> > 
> > Best regards.

Best regards.
  

Patch

diff --git a/Makefile b/Makefile
index 4f283d915e54..f33c179f4cc3 100644
--- a/Makefile
+++ b/Makefile
@@ -488,6 +488,7 @@  OBJCOPY		= $(LLVM_PREFIX)llvm-objcopy$(LLVM_SUFFIX)
 OBJDUMP		= $(LLVM_PREFIX)llvm-objdump$(LLVM_SUFFIX)
 READELF		= $(LLVM_PREFIX)llvm-readelf$(LLVM_SUFFIX)
 STRIP		= $(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX)
+ADDR2LINE	= $(LLVM_PREFIX)llvm-addr2line$(LLVM_SUFFIX)
 else
 CC		= $(CROSS_COMPILE)gcc
 LD		= $(CROSS_COMPILE)ld
@@ -497,6 +498,7 @@  OBJCOPY		= $(CROSS_COMPILE)objcopy
 OBJDUMP		= $(CROSS_COMPILE)objdump
 READELF		= $(CROSS_COMPILE)readelf
 STRIP		= $(CROSS_COMPILE)strip
+ADDR2LINE	= $(CROSS_COMPILE)addr2line
 endif
 RUSTC		= rustc
 RUSTDOC		= rustdoc
@@ -611,7 +613,7 @@  export RUSTC_BOOTSTRAP := 1
 export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG
 export RUSTC RUSTDOC RUSTFMT RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN CARGO
 export HOSTRUSTC KBUILD_HOSTRUSTFLAGS
-export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
+export CPP AR NM STRIP OBJCOPY OBJDUMP READELF ADDR2LINE PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
 export PERL PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
 export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD
 export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
diff --git a/init/Kconfig b/init/Kconfig
index 6d35728b94b2..d45dd423e1ec 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1738,6 +1738,28 @@  config KALLSYMS_BASE_RELATIVE
 	  time constants, and no relocation pass is required at runtime to fix
 	  up the entries based on the runtime load address of the kernel.
 
+config KALLSYMS_ALIAS_SRCLINE
+	bool "Produces alias for duplicated text symbols" if EXPERT
+	depends on KALLSYMS && DEBUG_INFO && !DEBUG_INFO_SPLIT
+	help
+	  It is not uncommon for drivers or modules related to similar
+	  peripherals to have symbols with the exact same name.
+	  While this is not a problem for the kernel's binary itself, it
+	  becomes an issue when attempting to trace or probe specific
+	  functions using infrastructure like ftrace or kprobe.
+
+	  This option addresses this challenge, producing alias for text
+	  symbol names that include the file name and line where the symbols
+	  are defined in the source code.
+
+config KALLSYMS_ALIAS_SRCLINE_DATA
+	bool "Produces alias also for global variables names"
+	depends on KALLSYMS_ALIAS_SRCLINE
+	help
+	  Sometimes it can be useful to refer to global vars by name. Since
+	  they suffer the same issue as text symbols, this config option
+	  allows having aliases for global variables names too.
+
 # end of the "standard kernel features (expert users)" menu
 
 # syscall, maps, verifier
diff --git a/scripts/kas_alias.py b/scripts/kas_alias.py
new file mode 100755
index 000000000000..8cc2a2178da6
--- /dev/null
+++ b/scripts/kas_alias.py
@@ -0,0 +1,132 @@ 
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2023 Red Hat, Inc. Alessandro Carminati <alessandro.carminati@gmail.com>
+#
+# kas_alias: Adds alias to duplicate symbols in the kallsyms output.
+
+import subprocess
+import sys
+import os
+import argparse
+import re
+from collections import namedtuple
+
+regex_filter = [
+        "^__compound_literal\\.[0-9]+$",
+        "^__[wm]*key\\.[0-9]+$",
+        "^_*TRACE_SYSTEM.*$",
+        "^__already_done\\.[0-9]+$",
+        "^__msg\\.[0-9]+$",
+        "^__func__\\.[0-9]+$",
+        "^CSWTCH\\.[0-9]+$",
+        "^_rs\\.[0-9]+$",
+        "^___tp_str\\.[0-9]+$",
+        "^__flags\\.[0-9]+$",
+        "^___done\\.[0-9]+$",
+        "^__print_once\\.[0-9]+$",
+        "^___once_key\\.[0-9]+$",
+        "^__pfx_.*$",
+        "^__cfi_.*$"
+        ]
+
+class SeparatorType:
+    def __call__(self, separator):
+        if len(separator) != 1:
+            raise argparse.ArgumentTypeError("Separator must be a single character")
+        return separator
+
+Line = namedtuple('Line', ['address', 'type', 'name'])
+
+def parse_file(filename):
+    symbol_list = []
+    name_occurrences = {}
+
+    with open(filename, 'r') as file:
+        for line in file:
+            fields = line.strip().split()
+
+            if len(fields) >= 3:
+                address, type, name = fields[0], fields[1], ' '.join(fields[2:])
+                symbol_list.append(Line(address, type, name))
+                name_occurrences[name] = name_occurrences.get(name, 0) + 1
+
+    return symbol_list, name_occurrences
+
+def find_duplicate(symbol_list, name_occurrences):
+    name_to_lines = {}
+    duplicate_lines = []
+
+    for line in symbol_list:
+        if line.name in name_to_lines:
+            first_occurrence = name_to_lines[line.name]
+            duplicate_lines.extend([first_occurrence, line])
+        else:
+            name_to_lines[line.name] = line
+
+    return duplicate_lines
+
+def start_addr2line_process(binary_file, addr2line_file):
+    try:
+        addr2line_process = subprocess.Popen([addr2line_file, '-fe', binary_file],
+                                             stdin=subprocess.PIPE,
+                                             stdout=subprocess.PIPE,
+                                             stderr=subprocess.PIPE,
+                                             text=True)
+        return addr2line_process
+    except Exception as e:
+        print(f"Error starting addr2line process: {str(e)}")
+        return None
+
+def addr2line_fetch_address(addr2line_process, address):
+    try:
+        addr2line_process.stdin.write(address + '\n')
+        addr2line_process.stdin.flush()
+        addr2line_process.stdout.readline().strip()
+        output = addr2line_process.stdout.readline().strip()
+
+        return os.path.normpath(output)
+    except Exception as e:
+        print(f"Error communicating with addr2line: {str(e)}")
+        return None
+
+def process_line(line, config):
+    if config:
+        return not (any(re.match(regex, obj.name) for regex in regex_filter))
+    else:
+        return obj.type in {"T", "t"}
+
+if __name__ == "__main__":
+    parser = argparse.ArgumentParser(description='Add alias to multiple occurring symbols name in kallsyms')
+    parser.add_argument('-a', "--addr2line", dest="addr2line_file", required=True)
+    parser.add_argument('-v', "--vmlinux", dest="vmlinux_file", required=True)
+    parser.add_argument('-o', "--outfile", dest="output_file", required=True)
+    parser.add_argument('-n', "--nmdata", dest="nm_data_file", required=True)
+    parser.add_argument('-s', "--separator", dest="separator", required=False, default="@", type=SeparatorType())
+    parser.add_argument('-d', "--data", dest="include_data", required=False, action='store_true')
+    config = parser.parse_args()
+
+    try:
+        config.linux_base_dir = os.getcwd()+"/"
+        symbol_list, name_occurrences = parse_file(config.nm_data_file)
+        addr2line_process = start_addr2line_process(config.vmlinux_file, config.addr2line_file)
+
+        with open(config.output_file, 'w') as file:
+            for obj in symbol_list:
+                file.write("{} {} {}\n".format(obj.address, obj.type, obj.name))
+                if (name_occurrences[obj.name] > 1) and process_line(obj, config.include_data) :
+                    output = addr2line_fetch_address(addr2line_process, obj.address)
+                    decoration = config.separator + "".join(
+                        "_" if not c.isalnum() else c for c in output.replace(config.linux_base_dir, "")
+                    )
+                    if decoration != config.separator + "____":
+                        file.write("{} {} {}\n".format(obj.address, obj.type, obj.name + decoration))
+
+        addr2line_process.stdin.close()
+        addr2line_process.stdout.close()
+        addr2line_process.stderr.close()
+        addr2line_process.wait()
+
+    except Exception as e:
+        print(f"An error occurred: {str(e)}")
+        raise SystemExit("Script terminated due to an error")
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index a432b171be82..7cc24fd5f6b4 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -91,7 +91,12 @@  vmlinux_link()
 
 	# The kallsyms linking does not need debug symbols included.
 	if [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
-		ldflags="${ldflags} ${wl}--strip-debug"
+		# The kallsyms linking does not need debug symbols included,
+		# unless the KALLSYMS_ALIAS_SRCLINE.
+		if ! is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE && \
+		   [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
+			ldflags="${ldflags} ${wl}--strip-debug"
+		fi
 	fi
 
 	if is_enabled CONFIG_VMLINUX_MAP; then
@@ -161,7 +166,18 @@  kallsyms()
 	fi
 
 	info KSYMS ${2}
-	scripts/kallsyms ${kallsymopt} ${1} > ${2}
+	ALIAS=""
+	KAS_DATA=""
+	if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE_DATA; then
+		KAS_DATA="-d"
+	fi
+	if is_enabled CONFIG_KALLSYMS_ALIAS_SRCLINE; then
+		ALIAS=".alias"
+		scripts/kas_alias.py \
+			-a ${ADDR2LINE} -v ${kallsyms_vmlinux} -n ${1} \
+			-o ${1}${ALIAS} -s @ ${KAS_DATA}
+	fi
+	scripts/kallsyms ${kallsymopt} ${1}${ALIAS} > ${2}
 }
 
 # Perform one step in kallsyms generation, including temporary linking of