[v6,18/19] PCI: starfive: Add JH7110 PCIe controller

Message ID 20230915102243.59775-19-minda.chen@starfivetech.com
State New
Headers
Series Refactoring Microchip PCIe driver and add StarFive PCIe |

Commit Message

Minda Chen Sept. 15, 2023, 10:22 a.m. UTC
  Add StarFive JH7110 SoC PCIe controller platform
driver codes, and add host init/deinit to pcie-plda-host.c

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Co-developed-by: Kevin Xie <kevin.xie@starfivetech.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
---
 MAINTAINERS                                  |   7 +
 drivers/pci/controller/plda/Kconfig          |  12 +
 drivers/pci/controller/plda/Makefile         |   1 +
 drivers/pci/controller/plda/pcie-plda-host.c | 121 ++++-
 drivers/pci/controller/plda/pcie-plda.h      |  91 +++-
 drivers/pci/controller/plda/pcie-starfive.c  | 461 +++++++++++++++++++
 6 files changed, 688 insertions(+), 5 deletions(-)
 create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
  

Comments

Emil Renner Berthing Sept. 17, 2023, 10:13 p.m. UTC | #1
Minda Chen wrote:
> Add StarFive JH7110 SoC PCIe controller platform
> driver codes, and add host init/deinit to pcie-plda-host.c
>
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> Co-developed-by: Kevin Xie <kevin.xie@starfivetech.com>
> Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
> ---
>  MAINTAINERS                                  |   7 +
>  drivers/pci/controller/plda/Kconfig          |  12 +
>  drivers/pci/controller/plda/Makefile         |   1 +
>  drivers/pci/controller/plda/pcie-plda-host.c | 121 ++++-
>  drivers/pci/controller/plda/pcie-plda.h      |  91 +++-
>  drivers/pci/controller/plda/pcie-starfive.c  | 461 +++++++++++++++++++
>  6 files changed, 688 insertions(+), 5 deletions(-)
>  create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index ebdb65e195ee..4632cd411a3d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -16679,6 +16679,13 @@ S:	Maintained
>  F:	Documentation/devicetree/bindings/pci/socionext,uniphier-pcie*
>  F:	drivers/pci/controller/dwc/pcie-uniphier*
>
> +PCIE DRIVER FOR STARFIVE JH71x0
> +M:	Kevin Xie <kevin.xie@starfivetech.com>
> +L:	linux-pci@vger.kernel.org
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/pci/starfive*
> +F:	drivers/pci/controller/plda/pcie-starfive.c
> +
>  PCIE DRIVER FOR ST SPEAR13XX
>  M:	Pratyush Anand <pratyush.anand@gmail.com>
>  L:	linux-pci@vger.kernel.org
> diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
> index e54a82ee94f5..8de661730aa5 100644
> --- a/drivers/pci/controller/plda/Kconfig
> +++ b/drivers/pci/controller/plda/Kconfig
> @@ -15,4 +15,16 @@ config PCIE_MICROCHIP_HOST
>  	  Say Y here if you want kernel to support the Microchip AXI PCIe
>  	  Host Bridge driver.
>
> +config PCIE_STARFIVE_HOST
> +	tristate "StarFive PCIe host controller"
> +	depends on OF && PCI_MSI
> +	select PCIE_PLDA_HOST
> +	help
> +	  Say Y here if you want to support the StarFive PCIe controller
> +	  in host mode. StarFive PCIe controller uses PLDA PCIe
> +	  core.
> +	  If you choose to build this driver as module it will
> +	  be dynamically linked and module will be called
> +	  pcie-starfive.ko
> +
>  endmenu
> diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
> index 4340ab007f44..0ac6851bed48 100644
> --- a/drivers/pci/controller/plda/Makefile
> +++ b/drivers/pci/controller/plda/Makefile
> @@ -1,3 +1,4 @@
>  # SPDX-License-Identifier: GPL-2.0
>  obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
>  obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
> +obj-$(CONFIG_PCIE_STARFIVE_HOST) += pcie-starfive.o
> diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
> index 26e6cfd2eaba..8b32df477ad8 100644
> --- a/drivers/pci/controller/plda/pcie-plda-host.c
> +++ b/drivers/pci/controller/plda/pcie-plda-host.c
> @@ -20,6 +20,15 @@
>
>  #include "pcie-plda.h"
>
> +void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
> +				int where)
> +{
> +	struct plda_pcie_rp *pcie = bus->sysdata;
> +
> +	return pcie->config_base + PCIE_ECAM_OFFSET(bus->number, devfn, where);
> +}
> +EXPORT_SYMBOL_GPL(plda_pcie_map_bus);
> +
>  static void plda_handle_msi(struct irq_desc *desc)
>  {
>  	struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
> @@ -370,6 +379,12 @@ static const struct plda_event_ops plda_event_ops = {
>  	.get_events = plda_get_events,
>  };
>
> +static const struct plda_event plda_default_event = {
> +	.event_ops		= &plda_event_ops,
> +	.intx_event		= EVENT_PM_MSI_INT_INTX,
> +	.msi_event		= EVENT_PM_MSI_INT_MSI
> +};
> +
>  static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port,
>  				      const struct irq_domain_ops *ops)
>  {
> @@ -416,7 +431,6 @@ int plda_init_interrupts(struct platform_device *pdev,
>  			 const struct plda_event *event)
>  {
>  	struct device *dev = &pdev->dev;
> -	int irq;
>  	int i, intx_irq, msi_irq, event_irq;
>  	int ret;
>  	const struct irq_domain_ops *irq_dom_ops;
> @@ -434,8 +448,8 @@ int plda_init_interrupts(struct platform_device *pdev,
>  		return ret;
>  	}
>
> -	irq = platform_get_irq(pdev, 0);
> -	if (irq < 0)
> +	port->irq = platform_get_irq(pdev, 0);
> +	if (port->irq < 0)
>  		return -ENODEV;

Here you're dropping the local variable irq and just use port->irq directly..

>
>  	port->event_ops = event->event_ops;
> @@ -465,6 +479,7 @@ int plda_init_interrupts(struct platform_device *pdev,
>  		dev_err(dev, "failed to map INTx interrupt\n");
>  		return -ENXIO;
>  	}
> +	port->intx_irq = intx_irq;

..but for intx_irq..

>
>  	/* Plug the INTx chained handler */
>  	irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
> @@ -473,12 +488,13 @@ int plda_init_interrupts(struct platform_device *pdev,
>  				     event->msi_event);
>  	if (!msi_irq)
>  		return -ENXIO;
> +	port->msi_irq = msi_irq;

..and msi_irq you're keeping the local variable. I think you should drop
the local variables here too, or at least do the same for all of them.

>
>  	/* Plug the MSI chained handler */
>  	irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
>
>  	/* Plug the main event chained handler */
> -	irq_set_chained_handler_and_data(irq, plda_handle_event, port);
> +	irq_set_chained_handler_and_data(port->irq, plda_handle_event, port);
>
>  	return 0;
>  }
> @@ -544,3 +560,100 @@ int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
>  	return 0;
>  }
>  EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
> +
> +static void plda_pcie_irq_domain_deinit(struct plda_pcie_rp *pcie)
> +{
> +	irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
> +	irq_set_chained_handler_and_data(pcie->msi_irq, NULL, NULL);
> +	irq_set_chained_handler_and_data(pcie->intx_irq, NULL, NULL);
> +
> +	irq_domain_remove(pcie->msi.msi_domain);
> +	irq_domain_remove(pcie->msi.dev_domain);
> +
> +	irq_domain_remove(pcie->intx_domain);
> +	irq_domain_remove(pcie->event_domain);
> +}
> +
> +int plda_pcie_host_init(struct plda_pcie_rp *port, struct pci_ops *ops)
> +{
> +	struct resource *cfg_res;
> +	struct device *dev = port->dev;
> +	int ret;
> +	struct pci_host_bridge *bridge;
> +	struct platform_device *pdev = to_platform_device(dev);

This looks weird. Please order initialized variables first and maybe even do
reverse christmas tree order. Eg. longeist lines first.

> +
> +	port->bridge_addr =
> +		devm_platform_ioremap_resource_byname(pdev, "apb");
> +
> +	if (IS_ERR(port->bridge_addr))
> +		return dev_err_probe(dev, PTR_ERR(port->bridge_addr),
> +				     "failed to map reg memory\n");
> +
> +	cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
> +	if (!cfg_res)
> +		return dev_err_probe(dev, -ENODEV,
> +				     "failed to get config memory\n");
> +
> +	port->config_base = devm_ioremap_resource(dev, cfg_res);
> +	if (IS_ERR(port->config_base))
> +		return dev_err_probe(dev, PTR_ERR(port->config_base),
> +				     "failed to map config memory\n");
> +
> +	port->phy = devm_phy_optional_get(dev, NULL);
> +	if (IS_ERR(port->phy))
> +		return dev_err_probe(dev, PTR_ERR(port->phy),
> +				     "failed to get pcie phy\n");
> +
> +	bridge = devm_pci_alloc_host_bridge(dev, 0);
> +	if (!bridge)
> +		return dev_err_probe(dev, -ENOMEM,
> +				     "failed to alloc bridge\n");
> +
> +	if (port->host_ops && port->host_ops->host_init) {
> +		ret = port->host_ops->host_init(port);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	port->bridge = bridge;
> +	plda_pcie_setup_window(port->bridge_addr, 0, cfg_res->start, 0,
> +			       resource_size(cfg_res));
> +	plda_pcie_setup_iomems(bridge, port);
> +	plda_set_default_msi(&port->msi);
> +	ret = plda_init_interrupts(pdev, port, &plda_default_event);
> +	if (ret)
> +		goto err_host;
> +
> +	/* Set default bus ops */
> +	bridge->ops = ops;
> +	bridge->sysdata = port;
> +
> +	ret = pci_host_probe(bridge);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to pci host probe: %d\n", ret);

I think you mean:

dev_err_probe(dev, ret, "failed to probe pci host\n");

> +		goto err_probe;
> +	}
> +
> +	return ret;
> +
> +err_probe:
> +	plda_pcie_irq_domain_deinit(port);
> +err_host:
> +	if (port->host_ops && port->host_ops->host_deinit)
> +		port->host_ops->host_deinit(port);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(plda_pcie_host_init);
> +
> +void plda_pcie_host_deinit(struct plda_pcie_rp *port)
> +{
> +	pci_stop_root_bus(port->bridge->bus);
> +	pci_remove_root_bus(port->bridge->bus);
> +
> +	plda_pcie_irq_domain_deinit(port);
> +
> +	if (port->host_ops && port->host_ops->host_deinit)
> +		port->host_ops->host_deinit(port);
> +}
> +EXPORT_SYMBOL_GPL(plda_pcie_host_deinit);
> diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
> index b7420598a326..e571047d7944 100644
> --- a/drivers/pci/controller/plda/pcie-plda.h
> +++ b/drivers/pci/controller/plda/pcie-plda.h
> @@ -6,14 +6,24 @@
>  #ifndef _PCIE_PLDA_H
>  #define _PCIE_PLDA_H
>
> +#include <linux/phy/phy.h>
> +
>  /* Number of MSI IRQs */
>  #define PLDA_MAX_NUM_MSI_IRQS			32
>
>  /* PCIe Bridge Phy Regs */
> +#define GEN_SETTINGS				0x80
> +#define  RP_ENABLE				1
> +#define PCIE_PCI_IDS_DW1			0x9c
> +#define  IDS_CLASS_CODE_SHIFT			16
>  #define PCIE_PCI_IRQ_DW0			0xa8
>  #define  MSIX_CAP_MASK				BIT(31)
>  #define  NUM_MSI_MSGS_MASK			GENMASK(6, 4)
>  #define  NUM_MSI_MSGS_SHIFT			4
> +#define PCI_MISC				0xb4
> +#define  PHY_FUNCTION_DIS			BIT(15)
> +#define PCIE_WINROM				0xfc
> +#define  PREF_MEM_WIN_64_SUPPORT		BIT(3)
>
>  #define IMASK_LOCAL				0x180
>  #define  DMA_END_ENGINE_0_MASK			0x00000000u
> @@ -64,6 +74,8 @@
>  #define ISTATUS_HOST				0x18c
>  #define IMSI_ADDR				0x190
>  #define ISTATUS_MSI				0x194
> +#define PMSG_SUPPORT_RX				0x3f0
> +#define  PMSG_LTR_SUPPORT			BIT(2)
>
>  /* PCIe Master table init defines */
>  #define ATR0_PCIE_WIN0_SRCADDR_PARAM		0x600u
> @@ -85,6 +97,8 @@
>  #define  PCIE_TX_RX_INTERFACE			0x00000000u
>  #define  PCIE_CONFIG_INTERFACE			0x00000001u
>
> +#define CONFIG_SPACE_ADDR			0x1000u
> +
>  #define ATR_ENTRY_SIZE				32
>
>  #define EVENT_A_ATR_EVT_POST_ERR		0
> @@ -134,6 +148,11 @@ struct plda_event_ops {
>  	u32 (*get_events)(struct plda_pcie_rp *pcie);
>  };
>
> +struct plda_pcie_host_ops {
> +	int (*host_init)(struct plda_pcie_rp *pcie);
> +	void (*host_deinit)(struct plda_pcie_rp *pcie);
> +};
> +
>  struct plda_msi {
>  	struct mutex lock;		/* Protect used bitmap */
>  	struct irq_domain *msi_domain;
> @@ -145,12 +164,19 @@ struct plda_msi {
>
>  struct plda_pcie_rp {
>  	struct device *dev;
> +	struct pci_host_bridge *bridge;
>  	struct irq_domain *intx_domain;
>  	struct irq_domain *event_domain;
>  	raw_spinlock_t lock;
>  	struct plda_msi msi;
>  	const struct plda_event_ops *event_ops;
> +	const struct plda_pcie_host_ops *host_ops;
> +	struct phy *phy;
>  	void __iomem *bridge_addr;
> +	void __iomem *config_base;
> +	int irq;
> +	int msi_irq;
> +	int intx_irq;
>  	int num_events;
>  };
>
> @@ -163,6 +189,7 @@ struct plda_event {
>  	int msi_event;
>  };
>
> +void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn, int where);
>  int plda_init_interrupts(struct platform_device *pdev,
>  			 struct plda_pcie_rp *port,
>  			 const struct plda_event *event);
> @@ -171,4 +198,66 @@ void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
>  			    size_t size);
>  int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
>  			   struct plda_pcie_rp *port);
> -#endif
> +int plda_pcie_host_init(struct plda_pcie_rp *pcie, struct pci_ops *ops);
> +void plda_pcie_host_deinit(struct plda_pcie_rp *pcie);
> +
> +static inline void plda_set_default_msi(struct plda_msi *msi)
> +{
> +	msi->vector_phy = IMSI_ADDR;
> +	msi->num_vectors = PLDA_MAX_NUM_MSI_IRQS;
> +}
> +
> +static inline void plda_pcie_enable_root_port(struct plda_pcie_rp *plda)
> +{
> +	u32 value;
> +
> +	value = readl_relaxed(plda->bridge_addr + GEN_SETTINGS);
> +	value |= RP_ENABLE;
> +	writel_relaxed(value, plda->bridge_addr + GEN_SETTINGS);
> +}
> +
> +static inline void plda_pcie_set_standard_class(struct plda_pcie_rp *plda)
> +{
> +	u32 value;
> +
> +	value = readl_relaxed(plda->bridge_addr + PCIE_PCI_IDS_DW1);
> +	value &= 0xff;
> +	value |= (PCI_CLASS_BRIDGE_PCI << IDS_CLASS_CODE_SHIFT);

This looks suspicious. You're clearing the lower 8 bits, but setting
bits 16 and up. Also the parentheses are not strictly necessary.

> +	writel_relaxed(value, plda->bridge_addr + PCIE_PCI_IDS_DW1);
> +}
> +
> +static inline void plda_pcie_set_pref_win_64bit(struct plda_pcie_rp *plda)
> +{
> +	u32 value;
> +
> +	value = readl_relaxed(plda->bridge_addr + PCIE_WINROM);
> +	value |= PREF_MEM_WIN_64_SUPPORT;
> +	writel_relaxed(value, plda->bridge_addr + PCIE_WINROM);
> +}
> +
> +static inline void plda_pcie_disable_ltr(struct plda_pcie_rp *plda)
> +{
> +	u32 value;
> +
> +	value = readl_relaxed(plda->bridge_addr + PMSG_SUPPORT_RX);
> +	value &= ~PMSG_LTR_SUPPORT;
> +	writel_relaxed(value, plda->bridge_addr + PMSG_SUPPORT_RX);
> +}
> +
> +static inline void plda_pcie_disable_func(struct plda_pcie_rp *plda)
> +{
> +	u32 value;
> +
> +	value = readl_relaxed(plda->bridge_addr + PCI_MISC);
> +	value |= PHY_FUNCTION_DIS;
> +	writel_relaxed(value, plda->bridge_addr + PCI_MISC);
> +}
> +
> +static inline void plda_pcie_write_rc_bar(struct plda_pcie_rp *plda, u64 val)
> +{
> +	void __iomem *addr = plda->bridge_addr + CONFIG_SPACE_ADDR;
> +
> +	writel_relaxed(val & 0xffffffff, addr + PCI_BASE_ADDRESS_0);
> +	writel_relaxed(val >> 32, addr + PCI_BASE_ADDRESS_1);

Consider using lower_32_bits(val) and upper_32_bits(val) here.

> +}
> +#endif /* _PCIE_PLDA_H */
> diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
> new file mode 100644
> index 000000000000..42099fef0d7d
> --- /dev/null
> +++ b/drivers/pci/controller/plda/pcie-starfive.c
> @@ -0,0 +1,461 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * PCIe host controller driver for StarFive JH7110 Soc.
> + *
> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_pci.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +#include "../../pci.h"
> +
> +#include "pcie-plda.h"
> +
> +#define PCIE_FUNC_NUM			4
> +
> +/* system control */
> +#define STG_SYSCON_PCIE0_BASE			0x48
> +#define STG_SYSCON_PCIE1_BASE			0x1f8
> +
> +#define STG_SYSCON_ARFUNC_OFFSET		0x78
> +#define STG_SYSCON_AXI4_SLVL_ARFUNC_MASK	 GENMASK(22, 8)
> +#define STG_SYSCON_AXI4_SLVL_PHY_ARFUNC(x)	 FIELD_PREP(GENMASK(20, 17), x)
> +#define STG_SYSCON_AWFUNC_OFFSET		0x7c
> +#define STG_SYSCON_AXI4_SLVL_AWFUNC_MASK	 GENMASK(14, 0)
> +#define STG_SYSCON_AXI4_SLVL_PHY_AWFUNC(x)	 FIELD_PREP(GENMASK(12, 9), x)
> +#define STG_SYSCON_CLKREQ			 BIT(22)
> +#define STG_SYSCON_CKREF_SRC_MASK		 GENMASK(19, 18)
> +#define STG_SYSCON_RP_NEP_OFFSET		0xe8
> +#define STG_SYSCON_K_RP_NEP			 BIT(8)
> +#define STG_SYSCON_LNKSTA_OFFSET		0x170
> +#define DATA_LINK_ACTIVE			 BIT(5)
> +
> +/* Parameters for the waiting for link up routine */
> +#define LINK_WAIT_MAX_RETRIES	10
> +#define LINK_WAIT_USLEEP_MIN	90000
> +#define LINK_WAIT_USLEEP_MAX	100000
> +
> +struct starfive_jh7110_pcie {
> +	struct plda_pcie_rp plda;
> +	struct reset_control *resets;
> +	struct clk_bulk_data *clks;
> +	struct regmap *reg_syscon;
> +	struct gpio_desc *power_gpio;
> +	struct gpio_desc *reset_gpio;
> +
> +	u32 stg_arfun;
> +	u32 stg_awfun;
> +	u32 stg_rp_nep;
> +	u32 stg_lnksta;
> +
> +	int num_clks;
> +};
> +
> +/*
> + * The BAR0/1 of bridge should be hidden during enumeration to
> + * avoid the sizing and resource allocation by PCIe core.
> + */
> +static bool starfive_pcie_hide_rc_bar(struct pci_bus *bus, unsigned int  devfn,
> +				      int offset)
> +{
> +	if (pci_is_root_bus(bus) && !devfn &&
> +	    (offset == PCI_BASE_ADDRESS_0 || offset == PCI_BASE_ADDRESS_1))
> +		return true;
> +
> +	return false;
> +}
> +
> +static int starfive_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
> +				      int where, int size, u32 value)
> +{
> +	if (starfive_pcie_hide_rc_bar(bus, devfn, where))
> +		return PCIBIOS_BAD_REGISTER_NUMBER;
> +
> +	return pci_generic_config_write(bus, devfn, where, size, value);
> +}
> +
> +static int starfive_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
> +				     int where, int size, u32 *value)
> +{
> +	if (starfive_pcie_hide_rc_bar(bus, devfn, where))
> +		return PCIBIOS_BAD_REGISTER_NUMBER;
> +
> +	return pci_generic_config_read(bus, devfn, where, size, value);
> +}
> +
> +static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie, struct device *dev)
> +{
> +	int domain_nr, stg_pcie_base;
> +
> +	pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
> +	if (pcie->num_clks < 0)
> +		return dev_err_probe(dev, -ENODEV,
> +			"failed to get pcie clocks\n");
> +
> +	pcie->resets = devm_reset_control_array_get_exclusive(dev);
> +	if (IS_ERR(pcie->resets))
> +		return dev_err_probe(dev, PTR_ERR(pcie->resets),
> +			"failed to get pcie resets");
> +
> +	pcie->reg_syscon =
> +		syscon_regmap_lookup_by_phandle(dev->of_node,
> +						"starfive,stg-syscon");
> +
> +	if (IS_ERR(pcie->reg_syscon))
> +		return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
> +			"failed to parse starfive,stg-syscon\n");
> +
> +	domain_nr = of_get_pci_domain_nr(dev->of_node);
> +
> +	if (domain_nr < 0 || domain_nr > 1)
> +		return dev_err_probe(dev, -ENODEV,
> +			"failed to get valid pcie id\n");
> +
> +	if (domain_nr == 0)
> +		stg_pcie_base = STG_SYSCON_PCIE0_BASE;
> +	else
> +		stg_pcie_base = STG_SYSCON_PCIE1_BASE;

It seems you only need the domain_nr for the determining this offset into the
stg_syscon. Since this is already specific to the JH7110 SoC, wouldn't it be
safer to match on the 0x2b000000/0x2c000000 or 0x940000000/0x9c0000000
address of the peripheral instead?

> +
> +	pcie->stg_arfun = stg_pcie_base + STG_SYSCON_ARFUNC_OFFSET;
> +	pcie->stg_awfun = stg_pcie_base + STG_SYSCON_AWFUNC_OFFSET;
> +	pcie->stg_rp_nep = stg_pcie_base + STG_SYSCON_RP_NEP_OFFSET;
> +	pcie->stg_lnksta = stg_pcie_base + STG_SYSCON_LNKSTA_OFFSET;

These offsets are all the same for both pcie0 and pcie1 so why do you need a
variable for each? Eg. why not just

if (domain_nr == 0)
	pcie->stg_base = STG_SYSCON_PCIE0_BASE;
else
	pcie->stg_base = STG_SYSCON_PCIE1_BASE;

..and then add add those static offsets where needed?

> +
> +	pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
> +	if (IS_ERR(pcie->reset_gpio)) {
> +		dev_warn(dev, "failed to get perst-gpio\n");

Why is this a warn when you actually error out? I think you mean

return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio, "failed to get
reset GPIO\n");

> +		return -EINVAL;
> +	}
> +
> +	pcie->power_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
> +	if (IS_ERR(pcie->power_gpio)) {
> +		dev_warn(dev, "failed to get power-gpio\n");
> +		return -EINVAL;

return dev_err_probe(dev, PTR_ERR(pcie->power_gpio), "failed to get
power GPIO\n");

> +	}
> +
> +	return 0;
> +}
> +
> +static struct pci_ops starfive_pcie_ops = {
> +	.map_bus	= plda_pcie_map_bus,
> +	.read           = starfive_pcie_config_read,
> +	.write          = starfive_pcie_config_write,
> +};
> +
> +static int starfive_pcie_clk_rst_init(struct starfive_jh7110_pcie *pcie)
> +{
> +	int ret;
> +	struct device *dev = pcie->plda.dev;

Again, please order initialized variables first.

> +
> +	ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
> +	if (ret) {
> +		dev_err(dev, "failed to enable clocks\n");
> +		return ret;

return dev_err_probe(dev, ret, "failed to enable clocks\n");

> +	}
> +
> +	ret = reset_control_deassert(pcie->resets);
> +	if (ret) {
> +		clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> +		dev_err(dev, "failed to resets\n");

I think you mean
return dev_err_probe(dev, ret, "failed to deassert resets\n");

> +	}
> +
> +	return ret;
> +}
> +
> +static void starfive_pcie_clk_rst_deinit(struct starfive_jh7110_pcie *pcie)
> +{
> +	reset_control_assert(pcie->resets);
> +	clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> +}
> +
> +static bool starfive_pcie_link_up(struct plda_pcie_rp *plda)
> +{
> +	struct starfive_jh7110_pcie *pcie =
> +		container_of(plda, struct starfive_jh7110_pcie, plda);
> +	struct device *dev = pcie->plda.dev;

This is only used once below, so just use pcie->plda.dev directly there.

> +	int ret;
> +	u32 stg_reg_val;
> +
> +	ret = regmap_read(pcie->reg_syscon, pcie->stg_lnksta, &stg_reg_val);
> +	if (ret) {
> +		dev_err(dev, "failed to read link status\n");
> +		return false;
> +	}
> +
> +	if (stg_reg_val & DATA_LINK_ACTIVE)
> +		return true;
> +
> +	return false;

These last 4 lines is just "return stg_reg_val & DATA_LINK_ACTIVE;" right?

> +}
> +
> +static int starfive_pcie_host_wait_for_link(struct starfive_jh7110_pcie *pcie)
> +{
> +	struct device *dev = pcie->plda.dev;

Only used once, just inline.

> +	int retries;
> +
> +	/* Check if the link is up or not */
> +	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
> +		if (starfive_pcie_link_up(&pcie->plda)) {
> +			dev_info(dev, "port link up\n");
> +			return 0;
> +		}
> +		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
> +	}
> +
> +	return -ETIMEDOUT;
> +}
> +
> +static int starfive_pcie_enable_phy(struct device *dev, struct plda_pcie_rp *pcie)
> +{
> +	int ret;
> +
> +	if (!pcie->phy)
> +		return 0;
> +
> +	ret = phy_init(pcie->phy);
> +	if (ret)
> +		return dev_err_probe(dev, ret,
> +			"failed to initialize pcie phy\n");
> +
> +	ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
> +	if (ret) {
> +		dev_err(dev, "failed to set pcie mode\n");
> +		goto err_phy_on;
> +	}
> +
> +	ret = phy_power_on(pcie->phy);
> +	if (ret) {
> +		dev_err(dev, "failed to power on pcie phy\n");
> +		goto err_phy_on;
> +	}
> +
> +	return 0;
> +
> +err_phy_on:
> +	phy_exit(pcie->phy);
> +	return ret;
> +}
> +
> +static void starfive_pcie_disable_phy(struct plda_pcie_rp *pcie)
> +{
> +	phy_power_off(pcie->phy);
> +	phy_exit(pcie->phy);
> +}
> +
> +static void starfive_pcie_host_deinit(struct plda_pcie_rp *plda)
> +{
> +	struct starfive_jh7110_pcie *pcie =
> +		container_of(plda, struct starfive_jh7110_pcie, plda);
> +
> +	starfive_pcie_clk_rst_deinit(pcie);
> +	if (pcie->power_gpio)
> +		gpiod_set_value_cansleep(pcie->power_gpio, 0);
> +	starfive_pcie_disable_phy(plda);
> +}
> +
> +static int starfive_pcie_host_init(struct plda_pcie_rp *plda)
> +{
> +	int i;
> +	struct starfive_jh7110_pcie *pcie =
> +		container_of(plda, struct starfive_jh7110_pcie, plda);
> +	struct device *dev = plda->dev;
> +	int ret;

Weird ordering again.

> +
> +	ret = starfive_pcie_enable_phy(dev, plda);
> +	if (ret)
> +		return ret;
> +
> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_rp_nep,
> +			   STG_SYSCON_K_RP_NEP, STG_SYSCON_K_RP_NEP);
> +
> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
> +			   STG_SYSCON_CKREF_SRC_MASK,
> +			   FIELD_PREP(STG_SYSCON_CKREF_SRC_MASK, 2));
> +
> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
> +			   STG_SYSCON_CLKREQ, STG_SYSCON_CLKREQ);
> +
> +	ret = starfive_pcie_clk_rst_init(pcie);
> +	if (ret)
> +		return ret;
> +
> +	if (pcie->power_gpio)
> +		gpiod_set_value_cansleep(pcie->power_gpio, 1);
> +
> +	if (pcie->reset_gpio)
> +		gpiod_set_value_cansleep(pcie->reset_gpio, 1);
> +
> +	/* Disable physical functions except #0 */
> +	for (i = 1; i < PCIE_FUNC_NUM; i++) {
> +		regmap_update_bits(pcie->reg_syscon,
> +				   pcie->stg_arfun,
> +				   STG_SYSCON_AXI4_SLVL_ARFUNC_MASK,
> +				   STG_SYSCON_AXI4_SLVL_PHY_ARFUNC(i));
> +
> +		regmap_update_bits(pcie->reg_syscon,
> +				   pcie->stg_awfun,
> +				   STG_SYSCON_AXI4_SLVL_AWFUNC_MASK,
> +				   STG_SYSCON_AXI4_SLVL_PHY_AWFUNC(i));
> +
> +		plda_pcie_disable_func(plda);
> +	}
> +
> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_arfun,
> +			   STG_SYSCON_AXI4_SLVL_ARFUNC_MASK, 0);
> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
> +			   STG_SYSCON_AXI4_SLVL_AWFUNC_MASK, 0);
> +
> +	plda_pcie_enable_root_port(plda);
> +	plda_pcie_write_rc_bar(plda, 0);
> +
> +	/* PCIe PCI Standard Configuration Identification Settings. */
> +	plda_pcie_set_standard_class(plda);
> +
> +	/*
> +	 * The LTR message forwarding of PCIe Message Reception was set by core
> +	 * as default, but the forward id & addr are also need to be reset.
> +	 * If we do not disable LTR message forwarding here, or set a legal
> +	 * forwarding address, the kernel will get stuck after this driver probe.
> +	 * To workaround, disable the LTR message forwarding support on
> +	 * PCIe Message Reception.
> +	 */
> +	plda_pcie_disable_ltr(plda);
> +
> +	/* Prefetchable memory window 64-bit addressing support */
> +	plda_pcie_set_pref_win_64bit(plda);
> +
> +	/* Ensure that PERST has been asserted for at least 100 ms,
> +	 * the sleep value is T_PVPERL from PCIe CEM spec r2.0 (Table 2-4)
> +	 */
> +	msleep(100);
> +	if (pcie->reset_gpio)
> +		gpiod_set_value_cansleep(pcie->reset_gpio, 0);
> +
> +	/* As the requirement in PCIe base spec r6.0, system (<=5GT/s) must
> +	 * wait a minimum of 100 ms following exit from a conventional reset
> +	 * before sending a configuration request to the device.
> +	 */
> +	msleep(100);
> +
> +	if (starfive_pcie_host_wait_for_link(pcie))
> +		dev_info(dev, "port link down\n");
> +
> +	return ret;
> +}
> +
> +static const struct plda_pcie_host_ops sf_host_ops = {
> +	.host_init = starfive_pcie_host_init,
> +	.host_deinit = starfive_pcie_host_deinit,
> +};
> +
> +static int starfive_pcie_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct starfive_jh7110_pcie *pcie;
> +	struct plda_pcie_rp *plda;
> +	int ret;
> +
> +	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> +	if (!pcie)
> +		return -ENOMEM;
> +
> +	plda = &pcie->plda;
> +	plda->dev = dev;
> +
> +	ret = starfive_pcie_parse_dt(pcie, dev);
> +	if (ret)
> +		return ret;
> +
> +	plda->host_ops = &sf_host_ops;
> +	plda->num_events = NUM_PLDA_EVENTS;
> +	ret = plda_pcie_host_init(&pcie->plda, &starfive_pcie_ops);
> +	if (ret)
> +		return ret;
> +
> +	pm_runtime_enable(&pdev->dev);
> +	pm_runtime_get_sync(&pdev->dev);
> +	platform_set_drvdata(pdev, pcie);
> +
> +	return 0;
> +}
> +
> +static void starfive_pcie_remove(struct platform_device *pdev)
> +{
> +	struct starfive_jh7110_pcie *pcie = platform_get_drvdata(pdev);
> +
> +	plda_pcie_host_deinit(&pcie->plda);
> +	platform_set_drvdata(pdev, NULL);
> +}
> +
> +static int starfive_pcie_suspend_noirq(struct device *dev)
> +{
> +	struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
> +
> +	if (!pcie)
> +		return 0;
> +
> +	clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> +	starfive_pcie_disable_phy(&pcie->plda);
> +
> +	return 0;
> +}
> +
> +static int starfive_pcie_resume_noirq(struct device *dev)
> +{
> +	struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = starfive_pcie_enable_phy(dev, &pcie->plda);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
> +	if (ret) {
> +		dev_err(dev, "failed to enable clocks\n");
> +		starfive_pcie_disable_phy(&pcie->plda);
> +		return ret;
> +	}
> +
> +	return ret;
> +}
> +
> +static const struct dev_pm_ops starfive_pcie_pm_ops = {
> +	NOIRQ_SYSTEM_SLEEP_PM_OPS(starfive_pcie_suspend_noirq,
> +				  starfive_pcie_resume_noirq)
> +};
> +
> +static const struct of_device_id starfive_pcie_of_match[] = {
> +	{ .compatible = "starfive,jh7110-pcie"},

Missing space before }

> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, starfive_pcie_of_match);
> +
> +static struct platform_driver starfive_pcie_driver = {
> +	.driver = {
> +		.name = "pcie-starfive",
> +		.of_match_table = of_match_ptr(starfive_pcie_of_match),
> +#ifdef CONFIG_PM_SLEEP
> +		.pm = &starfive_pcie_pm_ops,
> +#endif

This can be just .pm = pm_sleep_ptr(&starfive_pcie_pm_ops),

> +	},
> +	.probe = starfive_pcie_probe,
> +	.remove_new = starfive_pcie_remove,
> +};
> +module_platform_driver(starfive_pcie_driver);
> +
> +MODULE_DESCRIPTION("StarFive JH7110 PCIe host driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.17.1
  
Emil Renner Berthing Sept. 18, 2023, 10:52 a.m. UTC | #2
Emil Renner Berthing wrote:
> Minda Chen wrote:
> > Add StarFive JH7110 SoC PCIe controller platform
> > driver codes, and add host init/deinit to pcie-plda-host.c
> >
> > Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> > Co-developed-by: Kevin Xie <kevin.xie@starfivetech.com>
> > Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
> > ---
> >  MAINTAINERS                                  |   7 +
> >  drivers/pci/controller/plda/Kconfig          |  12 +
> >  drivers/pci/controller/plda/Makefile         |   1 +
> >  drivers/pci/controller/plda/pcie-plda-host.c | 121 ++++-
> >  drivers/pci/controller/plda/pcie-plda.h      |  91 +++-
> >  drivers/pci/controller/plda/pcie-starfive.c  | 461 +++++++++++++++++++
> >  6 files changed, 688 insertions(+), 5 deletions(-)
> >  create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index ebdb65e195ee..4632cd411a3d 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -16679,6 +16679,13 @@ S:	Maintained
> >  F:	Documentation/devicetree/bindings/pci/socionext,uniphier-pcie*
> >  F:	drivers/pci/controller/dwc/pcie-uniphier*
> >
> > +PCIE DRIVER FOR STARFIVE JH71x0
> > +M:	Kevin Xie <kevin.xie@starfivetech.com>
> > +L:	linux-pci@vger.kernel.org
> > +S:	Maintained
> > +F:	Documentation/devicetree/bindings/pci/starfive*
> > +F:	drivers/pci/controller/plda/pcie-starfive.c
> > +
> >  PCIE DRIVER FOR ST SPEAR13XX
> >  M:	Pratyush Anand <pratyush.anand@gmail.com>
> >  L:	linux-pci@vger.kernel.org
> > diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
> > index e54a82ee94f5..8de661730aa5 100644
> > --- a/drivers/pci/controller/plda/Kconfig
> > +++ b/drivers/pci/controller/plda/Kconfig
> > @@ -15,4 +15,16 @@ config PCIE_MICROCHIP_HOST
> >  	  Say Y here if you want kernel to support the Microchip AXI PCIe
> >  	  Host Bridge driver.
> >
> > +config PCIE_STARFIVE_HOST
> > +	tristate "StarFive PCIe host controller"
> > +	depends on OF && PCI_MSI
> > +	select PCIE_PLDA_HOST
> > +	help
> > +	  Say Y here if you want to support the StarFive PCIe controller
> > +	  in host mode. StarFive PCIe controller uses PLDA PCIe
> > +	  core.
> > +	  If you choose to build this driver as module it will
> > +	  be dynamically linked and module will be called
> > +	  pcie-starfive.ko
> > +
> >  endmenu
> > diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
> > index 4340ab007f44..0ac6851bed48 100644
> > --- a/drivers/pci/controller/plda/Makefile
> > +++ b/drivers/pci/controller/plda/Makefile
> > @@ -1,3 +1,4 @@
> >  # SPDX-License-Identifier: GPL-2.0
> >  obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
> >  obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
> > +obj-$(CONFIG_PCIE_STARFIVE_HOST) += pcie-starfive.o
> > diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
> > index 26e6cfd2eaba..8b32df477ad8 100644
> > --- a/drivers/pci/controller/plda/pcie-plda-host.c
> > +++ b/drivers/pci/controller/plda/pcie-plda-host.c
> > @@ -20,6 +20,15 @@
> >
> >  #include "pcie-plda.h"
> >
> > +void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
> > +				int where)
> > +{
> > +	struct plda_pcie_rp *pcie = bus->sysdata;
> > +
> > +	return pcie->config_base + PCIE_ECAM_OFFSET(bus->number, devfn, where);
> > +}
> > +EXPORT_SYMBOL_GPL(plda_pcie_map_bus);
> > +
> >  static void plda_handle_msi(struct irq_desc *desc)
> >  {
> >  	struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
> > @@ -370,6 +379,12 @@ static const struct plda_event_ops plda_event_ops = {
> >  	.get_events = plda_get_events,
> >  };
> >
> > +static const struct plda_event plda_default_event = {
> > +	.event_ops		= &plda_event_ops,
> > +	.intx_event		= EVENT_PM_MSI_INT_INTX,
> > +	.msi_event		= EVENT_PM_MSI_INT_MSI
> > +};
> > +
> >  static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port,
> >  				      const struct irq_domain_ops *ops)
> >  {
> > @@ -416,7 +431,6 @@ int plda_init_interrupts(struct platform_device *pdev,
> >  			 const struct plda_event *event)
> >  {
> >  	struct device *dev = &pdev->dev;
> > -	int irq;
> >  	int i, intx_irq, msi_irq, event_irq;
> >  	int ret;
> >  	const struct irq_domain_ops *irq_dom_ops;
> > @@ -434,8 +448,8 @@ int plda_init_interrupts(struct platform_device *pdev,
> >  		return ret;
> >  	}
> >
> > -	irq = platform_get_irq(pdev, 0);
> > -	if (irq < 0)
> > +	port->irq = platform_get_irq(pdev, 0);
> > +	if (port->irq < 0)
> >  		return -ENODEV;
>
> Here you're dropping the local variable irq and just use port->irq directly..
>
> >
> >  	port->event_ops = event->event_ops;
> > @@ -465,6 +479,7 @@ int plda_init_interrupts(struct platform_device *pdev,
> >  		dev_err(dev, "failed to map INTx interrupt\n");
> >  		return -ENXIO;
> >  	}
> > +	port->intx_irq = intx_irq;
>
> ..but for intx_irq..
>
> >
> >  	/* Plug the INTx chained handler */
> >  	irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
> > @@ -473,12 +488,13 @@ int plda_init_interrupts(struct platform_device *pdev,
> >  				     event->msi_event);
> >  	if (!msi_irq)
> >  		return -ENXIO;
> > +	port->msi_irq = msi_irq;
>
> ..and msi_irq you're keeping the local variable. I think you should drop
> the local variables here too, or at least do the same for all of them.
>
> >
> >  	/* Plug the MSI chained handler */
> >  	irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
> >
> >  	/* Plug the main event chained handler */
> > -	irq_set_chained_handler_and_data(irq, plda_handle_event, port);
> > +	irq_set_chained_handler_and_data(port->irq, plda_handle_event, port);
> >
> >  	return 0;
> >  }
> > @@ -544,3 +560,100 @@ int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> >  	return 0;
> >  }
> >  EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
> > +
> > +static void plda_pcie_irq_domain_deinit(struct plda_pcie_rp *pcie)
> > +{
> > +	irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
> > +	irq_set_chained_handler_and_data(pcie->msi_irq, NULL, NULL);
> > +	irq_set_chained_handler_and_data(pcie->intx_irq, NULL, NULL);
> > +
> > +	irq_domain_remove(pcie->msi.msi_domain);
> > +	irq_domain_remove(pcie->msi.dev_domain);
> > +
> > +	irq_domain_remove(pcie->intx_domain);
> > +	irq_domain_remove(pcie->event_domain);
> > +}
> > +
> > +int plda_pcie_host_init(struct plda_pcie_rp *port, struct pci_ops *ops)
> > +{
> > +	struct resource *cfg_res;
> > +	struct device *dev = port->dev;
> > +	int ret;
> > +	struct pci_host_bridge *bridge;
> > +	struct platform_device *pdev = to_platform_device(dev);
>
> This looks weird. Please order initialized variables first and maybe even do
> reverse christmas tree order. Eg. longeist lines first.
>
> > +
> > +	port->bridge_addr =
> > +		devm_platform_ioremap_resource_byname(pdev, "apb");
> > +
> > +	if (IS_ERR(port->bridge_addr))
> > +		return dev_err_probe(dev, PTR_ERR(port->bridge_addr),
> > +				     "failed to map reg memory\n");
> > +
> > +	cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
> > +	if (!cfg_res)
> > +		return dev_err_probe(dev, -ENODEV,
> > +				     "failed to get config memory\n");
> > +
> > +	port->config_base = devm_ioremap_resource(dev, cfg_res);
> > +	if (IS_ERR(port->config_base))
> > +		return dev_err_probe(dev, PTR_ERR(port->config_base),
> > +				     "failed to map config memory\n");
> > +
> > +	port->phy = devm_phy_optional_get(dev, NULL);
> > +	if (IS_ERR(port->phy))
> > +		return dev_err_probe(dev, PTR_ERR(port->phy),
> > +				     "failed to get pcie phy\n");
> > +
> > +	bridge = devm_pci_alloc_host_bridge(dev, 0);
> > +	if (!bridge)
> > +		return dev_err_probe(dev, -ENOMEM,
> > +				     "failed to alloc bridge\n");
> > +
> > +	if (port->host_ops && port->host_ops->host_init) {
> > +		ret = port->host_ops->host_init(port);
> > +		if (ret)
> > +			return ret;
> > +	}
> > +
> > +	port->bridge = bridge;
> > +	plda_pcie_setup_window(port->bridge_addr, 0, cfg_res->start, 0,
> > +			       resource_size(cfg_res));
> > +	plda_pcie_setup_iomems(bridge, port);
> > +	plda_set_default_msi(&port->msi);
> > +	ret = plda_init_interrupts(pdev, port, &plda_default_event);
> > +	if (ret)
> > +		goto err_host;
> > +
> > +	/* Set default bus ops */
> > +	bridge->ops = ops;
> > +	bridge->sysdata = port;
> > +
> > +	ret = pci_host_probe(bridge);
> > +	if (ret < 0) {
> > +		dev_err(dev, "failed to pci host probe: %d\n", ret);
>
> I think you mean:
>
> dev_err_probe(dev, ret, "failed to probe pci host\n");
>
> > +		goto err_probe;
> > +	}
> > +
> > +	return ret;
> > +
> > +err_probe:
> > +	plda_pcie_irq_domain_deinit(port);
> > +err_host:
> > +	if (port->host_ops && port->host_ops->host_deinit)
> > +		port->host_ops->host_deinit(port);
> > +
> > +	return ret;
> > +}
> > +EXPORT_SYMBOL_GPL(plda_pcie_host_init);
> > +
> > +void plda_pcie_host_deinit(struct plda_pcie_rp *port)
> > +{
> > +	pci_stop_root_bus(port->bridge->bus);
> > +	pci_remove_root_bus(port->bridge->bus);
> > +
> > +	plda_pcie_irq_domain_deinit(port);
> > +
> > +	if (port->host_ops && port->host_ops->host_deinit)
> > +		port->host_ops->host_deinit(port);
> > +}
> > +EXPORT_SYMBOL_GPL(plda_pcie_host_deinit);
> > diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
> > index b7420598a326..e571047d7944 100644
> > --- a/drivers/pci/controller/plda/pcie-plda.h
> > +++ b/drivers/pci/controller/plda/pcie-plda.h
> > @@ -6,14 +6,24 @@
> >  #ifndef _PCIE_PLDA_H
> >  #define _PCIE_PLDA_H
> >
> > +#include <linux/phy/phy.h>
> > +
> >  /* Number of MSI IRQs */
> >  #define PLDA_MAX_NUM_MSI_IRQS			32
> >
> >  /* PCIe Bridge Phy Regs */
> > +#define GEN_SETTINGS				0x80
> > +#define  RP_ENABLE				1
> > +#define PCIE_PCI_IDS_DW1			0x9c
> > +#define  IDS_CLASS_CODE_SHIFT			16
> >  #define PCIE_PCI_IRQ_DW0			0xa8
> >  #define  MSIX_CAP_MASK				BIT(31)
> >  #define  NUM_MSI_MSGS_MASK			GENMASK(6, 4)
> >  #define  NUM_MSI_MSGS_SHIFT			4
> > +#define PCI_MISC				0xb4
> > +#define  PHY_FUNCTION_DIS			BIT(15)
> > +#define PCIE_WINROM				0xfc
> > +#define  PREF_MEM_WIN_64_SUPPORT		BIT(3)
> >
> >  #define IMASK_LOCAL				0x180
> >  #define  DMA_END_ENGINE_0_MASK			0x00000000u
> > @@ -64,6 +74,8 @@
> >  #define ISTATUS_HOST				0x18c
> >  #define IMSI_ADDR				0x190
> >  #define ISTATUS_MSI				0x194
> > +#define PMSG_SUPPORT_RX				0x3f0
> > +#define  PMSG_LTR_SUPPORT			BIT(2)
> >
> >  /* PCIe Master table init defines */
> >  #define ATR0_PCIE_WIN0_SRCADDR_PARAM		0x600u
> > @@ -85,6 +97,8 @@
> >  #define  PCIE_TX_RX_INTERFACE			0x00000000u
> >  #define  PCIE_CONFIG_INTERFACE			0x00000001u
> >
> > +#define CONFIG_SPACE_ADDR			0x1000u
> > +
> >  #define ATR_ENTRY_SIZE				32
> >
> >  #define EVENT_A_ATR_EVT_POST_ERR		0
> > @@ -134,6 +148,11 @@ struct plda_event_ops {
> >  	u32 (*get_events)(struct plda_pcie_rp *pcie);
> >  };
> >
> > +struct plda_pcie_host_ops {
> > +	int (*host_init)(struct plda_pcie_rp *pcie);
> > +	void (*host_deinit)(struct plda_pcie_rp *pcie);
> > +};
> > +
> >  struct plda_msi {
> >  	struct mutex lock;		/* Protect used bitmap */
> >  	struct irq_domain *msi_domain;
> > @@ -145,12 +164,19 @@ struct plda_msi {
> >
> >  struct plda_pcie_rp {
> >  	struct device *dev;
> > +	struct pci_host_bridge *bridge;
> >  	struct irq_domain *intx_domain;
> >  	struct irq_domain *event_domain;
> >  	raw_spinlock_t lock;
> >  	struct plda_msi msi;
> >  	const struct plda_event_ops *event_ops;
> > +	const struct plda_pcie_host_ops *host_ops;
> > +	struct phy *phy;
> >  	void __iomem *bridge_addr;
> > +	void __iomem *config_base;
> > +	int irq;
> > +	int msi_irq;
> > +	int intx_irq;
> >  	int num_events;
> >  };
> >
> > @@ -163,6 +189,7 @@ struct plda_event {
> >  	int msi_event;
> >  };
> >
> > +void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn, int where);
> >  int plda_init_interrupts(struct platform_device *pdev,
> >  			 struct plda_pcie_rp *port,
> >  			 const struct plda_event *event);
> > @@ -171,4 +198,66 @@ void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
> >  			    size_t size);
> >  int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> >  			   struct plda_pcie_rp *port);
> > -#endif
> > +int plda_pcie_host_init(struct plda_pcie_rp *pcie, struct pci_ops *ops);
> > +void plda_pcie_host_deinit(struct plda_pcie_rp *pcie);
> > +
> > +static inline void plda_set_default_msi(struct plda_msi *msi)
> > +{
> > +	msi->vector_phy = IMSI_ADDR;
> > +	msi->num_vectors = PLDA_MAX_NUM_MSI_IRQS;
> > +}
> > +
> > +static inline void plda_pcie_enable_root_port(struct plda_pcie_rp *plda)
> > +{
> > +	u32 value;
> > +
> > +	value = readl_relaxed(plda->bridge_addr + GEN_SETTINGS);
> > +	value |= RP_ENABLE;
> > +	writel_relaxed(value, plda->bridge_addr + GEN_SETTINGS);
> > +}
> > +
> > +static inline void plda_pcie_set_standard_class(struct plda_pcie_rp *plda)
> > +{
> > +	u32 value;
> > +
> > +	value = readl_relaxed(plda->bridge_addr + PCIE_PCI_IDS_DW1);
> > +	value &= 0xff;
> > +	value |= (PCI_CLASS_BRIDGE_PCI << IDS_CLASS_CODE_SHIFT);
>
> This looks suspicious. You're clearing the lower 8 bits, but setting
> bits 16 and up. Also the parentheses are not strictly necessary.

Sorry, I just noticed I read this wrong. You're clearing *everything but* the
lower 8 bits. This may be the right thing to do, but then please add a comment
explaining why and define a mask with a name showing what those lower 8 bits
mean.

> > +	writel_relaxed(value, plda->bridge_addr + PCIE_PCI_IDS_DW1);
> > +}
> > +
> > +static inline void plda_pcie_set_pref_win_64bit(struct plda_pcie_rp *plda)
> > +{
> > +	u32 value;
> > +
> > +	value = readl_relaxed(plda->bridge_addr + PCIE_WINROM);
> > +	value |= PREF_MEM_WIN_64_SUPPORT;
> > +	writel_relaxed(value, plda->bridge_addr + PCIE_WINROM);
> > +}
> > +
> > +static inline void plda_pcie_disable_ltr(struct plda_pcie_rp *plda)
> > +{
> > +	u32 value;
> > +
> > +	value = readl_relaxed(plda->bridge_addr + PMSG_SUPPORT_RX);
> > +	value &= ~PMSG_LTR_SUPPORT;
> > +	writel_relaxed(value, plda->bridge_addr + PMSG_SUPPORT_RX);
> > +}
> > +
> > +static inline void plda_pcie_disable_func(struct plda_pcie_rp *plda)
> > +{
> > +	u32 value;
> > +
> > +	value = readl_relaxed(plda->bridge_addr + PCI_MISC);
> > +	value |= PHY_FUNCTION_DIS;
> > +	writel_relaxed(value, plda->bridge_addr + PCI_MISC);
> > +}
> > +
> > +static inline void plda_pcie_write_rc_bar(struct plda_pcie_rp *plda, u64 val)
> > +{
> > +	void __iomem *addr = plda->bridge_addr + CONFIG_SPACE_ADDR;
> > +
> > +	writel_relaxed(val & 0xffffffff, addr + PCI_BASE_ADDRESS_0);
> > +	writel_relaxed(val >> 32, addr + PCI_BASE_ADDRESS_1);
>
> Consider using lower_32_bits(val) and upper_32_bits(val) here.
>
> > +}
> > +#endif /* _PCIE_PLDA_H */
> > diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
> > new file mode 100644
> > index 000000000000..42099fef0d7d
> > --- /dev/null
> > +++ b/drivers/pci/controller/plda/pcie-starfive.c
> > @@ -0,0 +1,461 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * PCIe host controller driver for StarFive JH7110 Soc.
> > + *
> > + * Copyright (C) 2023 StarFive Technology Co., Ltd.
> > + */
> > +
> > +#include <linux/bitfield.h>
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/module.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/of_pci.h>
> > +#include <linux/pci.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/regmap.h>
> > +#include <linux/reset.h>
> > +#include "../../pci.h"
> > +
> > +#include "pcie-plda.h"
> > +
> > +#define PCIE_FUNC_NUM			4
> > +
> > +/* system control */
> > +#define STG_SYSCON_PCIE0_BASE			0x48
> > +#define STG_SYSCON_PCIE1_BASE			0x1f8
> > +
> > +#define STG_SYSCON_ARFUNC_OFFSET		0x78
> > +#define STG_SYSCON_AXI4_SLVL_ARFUNC_MASK	 GENMASK(22, 8)
> > +#define STG_SYSCON_AXI4_SLVL_PHY_ARFUNC(x)	 FIELD_PREP(GENMASK(20, 17), x)
> > +#define STG_SYSCON_AWFUNC_OFFSET		0x7c
> > +#define STG_SYSCON_AXI4_SLVL_AWFUNC_MASK	 GENMASK(14, 0)
> > +#define STG_SYSCON_AXI4_SLVL_PHY_AWFUNC(x)	 FIELD_PREP(GENMASK(12, 9), x)
> > +#define STG_SYSCON_CLKREQ			 BIT(22)
> > +#define STG_SYSCON_CKREF_SRC_MASK		 GENMASK(19, 18)
> > +#define STG_SYSCON_RP_NEP_OFFSET		0xe8
> > +#define STG_SYSCON_K_RP_NEP			 BIT(8)
> > +#define STG_SYSCON_LNKSTA_OFFSET		0x170
> > +#define DATA_LINK_ACTIVE			 BIT(5)
> > +
> > +/* Parameters for the waiting for link up routine */
> > +#define LINK_WAIT_MAX_RETRIES	10
> > +#define LINK_WAIT_USLEEP_MIN	90000
> > +#define LINK_WAIT_USLEEP_MAX	100000
> > +
> > +struct starfive_jh7110_pcie {
> > +	struct plda_pcie_rp plda;
> > +	struct reset_control *resets;
> > +	struct clk_bulk_data *clks;
> > +	struct regmap *reg_syscon;
> > +	struct gpio_desc *power_gpio;
> > +	struct gpio_desc *reset_gpio;
> > +
> > +	u32 stg_arfun;
> > +	u32 stg_awfun;
> > +	u32 stg_rp_nep;
> > +	u32 stg_lnksta;
> > +
> > +	int num_clks;
> > +};
> > +
> > +/*
> > + * The BAR0/1 of bridge should be hidden during enumeration to
> > + * avoid the sizing and resource allocation by PCIe core.
> > + */
> > +static bool starfive_pcie_hide_rc_bar(struct pci_bus *bus, unsigned int  devfn,
> > +				      int offset)
> > +{
> > +	if (pci_is_root_bus(bus) && !devfn &&
> > +	    (offset == PCI_BASE_ADDRESS_0 || offset == PCI_BASE_ADDRESS_1))
> > +		return true;
> > +
> > +	return false;
> > +}
> > +
> > +static int starfive_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
> > +				      int where, int size, u32 value)
> > +{
> > +	if (starfive_pcie_hide_rc_bar(bus, devfn, where))
> > +		return PCIBIOS_BAD_REGISTER_NUMBER;
> > +
> > +	return pci_generic_config_write(bus, devfn, where, size, value);
> > +}
> > +
> > +static int starfive_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
> > +				     int where, int size, u32 *value)
> > +{
> > +	if (starfive_pcie_hide_rc_bar(bus, devfn, where))
> > +		return PCIBIOS_BAD_REGISTER_NUMBER;
> > +
> > +	return pci_generic_config_read(bus, devfn, where, size, value);
> > +}
> > +
> > +static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie, struct device *dev)
> > +{
> > +	int domain_nr, stg_pcie_base;
> > +
> > +	pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
> > +	if (pcie->num_clks < 0)
> > +		return dev_err_probe(dev, -ENODEV,
> > +			"failed to get pcie clocks\n");
> > +
> > +	pcie->resets = devm_reset_control_array_get_exclusive(dev);
> > +	if (IS_ERR(pcie->resets))
> > +		return dev_err_probe(dev, PTR_ERR(pcie->resets),
> > +			"failed to get pcie resets");
> > +
> > +	pcie->reg_syscon =
> > +		syscon_regmap_lookup_by_phandle(dev->of_node,
> > +						"starfive,stg-syscon");
> > +
> > +	if (IS_ERR(pcie->reg_syscon))
> > +		return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
> > +			"failed to parse starfive,stg-syscon\n");
> > +
> > +	domain_nr = of_get_pci_domain_nr(dev->of_node);
> > +
> > +	if (domain_nr < 0 || domain_nr > 1)
> > +		return dev_err_probe(dev, -ENODEV,
> > +			"failed to get valid pcie id\n");
> > +
> > +	if (domain_nr == 0)
> > +		stg_pcie_base = STG_SYSCON_PCIE0_BASE;
> > +	else
> > +		stg_pcie_base = STG_SYSCON_PCIE1_BASE;
>
> It seems you only need the domain_nr for the determining this offset into the
> stg_syscon. Since this is already specific to the JH7110 SoC, wouldn't it be
> safer to match on the 0x2b000000/0x2c000000 or 0x940000000/0x9c0000000
> address of the peripheral instead?
>
> > +
> > +	pcie->stg_arfun = stg_pcie_base + STG_SYSCON_ARFUNC_OFFSET;
> > +	pcie->stg_awfun = stg_pcie_base + STG_SYSCON_AWFUNC_OFFSET;
> > +	pcie->stg_rp_nep = stg_pcie_base + STG_SYSCON_RP_NEP_OFFSET;
> > +	pcie->stg_lnksta = stg_pcie_base + STG_SYSCON_LNKSTA_OFFSET;
>
> These offsets are all the same for both pcie0 and pcie1 so why do you need a
> variable for each? Eg. why not just
>
> if (domain_nr == 0)
> 	pcie->stg_base = STG_SYSCON_PCIE0_BASE;
> else
> 	pcie->stg_base = STG_SYSCON_PCIE1_BASE;
>
> ..and then add add those static offsets where needed?
>
> > +
> > +	pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
> > +	if (IS_ERR(pcie->reset_gpio)) {
> > +		dev_warn(dev, "failed to get perst-gpio\n");
>
> Why is this a warn when you actually error out? I think you mean
>
> return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio, "failed to get
> reset GPIO\n");
>
> > +		return -EINVAL;
> > +	}
> > +
> > +	pcie->power_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
> > +	if (IS_ERR(pcie->power_gpio)) {
> > +		dev_warn(dev, "failed to get power-gpio\n");
> > +		return -EINVAL;
>
> return dev_err_probe(dev, PTR_ERR(pcie->power_gpio), "failed to get
> power GPIO\n");
>
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static struct pci_ops starfive_pcie_ops = {
> > +	.map_bus	= plda_pcie_map_bus,
> > +	.read           = starfive_pcie_config_read,
> > +	.write          = starfive_pcie_config_write,
> > +};
> > +
> > +static int starfive_pcie_clk_rst_init(struct starfive_jh7110_pcie *pcie)
> > +{
> > +	int ret;
> > +	struct device *dev = pcie->plda.dev;
>
> Again, please order initialized variables first.
>
> > +
> > +	ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
> > +	if (ret) {
> > +		dev_err(dev, "failed to enable clocks\n");
> > +		return ret;
>
> return dev_err_probe(dev, ret, "failed to enable clocks\n");
>
> > +	}
> > +
> > +	ret = reset_control_deassert(pcie->resets);
> > +	if (ret) {
> > +		clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> > +		dev_err(dev, "failed to resets\n");
>
> I think you mean
> return dev_err_probe(dev, ret, "failed to deassert resets\n");
>
> > +	}
> > +
> > +	return ret;
> > +}
> > +
> > +static void starfive_pcie_clk_rst_deinit(struct starfive_jh7110_pcie *pcie)
> > +{
> > +	reset_control_assert(pcie->resets);
> > +	clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> > +}
> > +
> > +static bool starfive_pcie_link_up(struct plda_pcie_rp *plda)
> > +{
> > +	struct starfive_jh7110_pcie *pcie =
> > +		container_of(plda, struct starfive_jh7110_pcie, plda);
> > +	struct device *dev = pcie->plda.dev;
>
> This is only used once below, so just use pcie->plda.dev directly there.
>
> > +	int ret;
> > +	u32 stg_reg_val;
> > +
> > +	ret = regmap_read(pcie->reg_syscon, pcie->stg_lnksta, &stg_reg_val);
> > +	if (ret) {
> > +		dev_err(dev, "failed to read link status\n");
> > +		return false;
> > +	}
> > +
> > +	if (stg_reg_val & DATA_LINK_ACTIVE)
> > +		return true;
> > +
> > +	return false;
>
> These last 4 lines is just "return stg_reg_val & DATA_LINK_ACTIVE;" right?
>
> > +}
> > +
> > +static int starfive_pcie_host_wait_for_link(struct starfive_jh7110_pcie *pcie)
> > +{
> > +	struct device *dev = pcie->plda.dev;
>
> Only used once, just inline.
>
> > +	int retries;
> > +
> > +	/* Check if the link is up or not */
> > +	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
> > +		if (starfive_pcie_link_up(&pcie->plda)) {
> > +			dev_info(dev, "port link up\n");
> > +			return 0;
> > +		}
> > +		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
> > +	}
> > +
> > +	return -ETIMEDOUT;
> > +}
> > +
> > +static int starfive_pcie_enable_phy(struct device *dev, struct plda_pcie_rp *pcie)
> > +{
> > +	int ret;
> > +
> > +	if (!pcie->phy)
> > +		return 0;
> > +
> > +	ret = phy_init(pcie->phy);
> > +	if (ret)
> > +		return dev_err_probe(dev, ret,
> > +			"failed to initialize pcie phy\n");
> > +
> > +	ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
> > +	if (ret) {
> > +		dev_err(dev, "failed to set pcie mode\n");
> > +		goto err_phy_on;
> > +	}
> > +
> > +	ret = phy_power_on(pcie->phy);
> > +	if (ret) {
> > +		dev_err(dev, "failed to power on pcie phy\n");
> > +		goto err_phy_on;
> > +	}
> > +
> > +	return 0;
> > +
> > +err_phy_on:
> > +	phy_exit(pcie->phy);
> > +	return ret;
> > +}
> > +
> > +static void starfive_pcie_disable_phy(struct plda_pcie_rp *pcie)
> > +{
> > +	phy_power_off(pcie->phy);
> > +	phy_exit(pcie->phy);
> > +}
> > +
> > +static void starfive_pcie_host_deinit(struct plda_pcie_rp *plda)
> > +{
> > +	struct starfive_jh7110_pcie *pcie =
> > +		container_of(plda, struct starfive_jh7110_pcie, plda);
> > +
> > +	starfive_pcie_clk_rst_deinit(pcie);
> > +	if (pcie->power_gpio)
> > +		gpiod_set_value_cansleep(pcie->power_gpio, 0);
> > +	starfive_pcie_disable_phy(plda);
> > +}
> > +
> > +static int starfive_pcie_host_init(struct plda_pcie_rp *plda)
> > +{
> > +	int i;
> > +	struct starfive_jh7110_pcie *pcie =
> > +		container_of(plda, struct starfive_jh7110_pcie, plda);
> > +	struct device *dev = plda->dev;
> > +	int ret;
>
> Weird ordering again.
>
> > +
> > +	ret = starfive_pcie_enable_phy(dev, plda);
> > +	if (ret)
> > +		return ret;
> > +
> > +	regmap_update_bits(pcie->reg_syscon, pcie->stg_rp_nep,
> > +			   STG_SYSCON_K_RP_NEP, STG_SYSCON_K_RP_NEP);
> > +
> > +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
> > +			   STG_SYSCON_CKREF_SRC_MASK,
> > +			   FIELD_PREP(STG_SYSCON_CKREF_SRC_MASK, 2));
> > +
> > +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
> > +			   STG_SYSCON_CLKREQ, STG_SYSCON_CLKREQ);
> > +
> > +	ret = starfive_pcie_clk_rst_init(pcie);
> > +	if (ret)
> > +		return ret;
> > +
> > +	if (pcie->power_gpio)
> > +		gpiod_set_value_cansleep(pcie->power_gpio, 1);
> > +
> > +	if (pcie->reset_gpio)
> > +		gpiod_set_value_cansleep(pcie->reset_gpio, 1);
> > +
> > +	/* Disable physical functions except #0 */
> > +	for (i = 1; i < PCIE_FUNC_NUM; i++) {
> > +		regmap_update_bits(pcie->reg_syscon,
> > +				   pcie->stg_arfun,
> > +				   STG_SYSCON_AXI4_SLVL_ARFUNC_MASK,
> > +				   STG_SYSCON_AXI4_SLVL_PHY_ARFUNC(i));
> > +
> > +		regmap_update_bits(pcie->reg_syscon,
> > +				   pcie->stg_awfun,
> > +				   STG_SYSCON_AXI4_SLVL_AWFUNC_MASK,
> > +				   STG_SYSCON_AXI4_SLVL_PHY_AWFUNC(i));
> > +
> > +		plda_pcie_disable_func(plda);
> > +	}
> > +
> > +	regmap_update_bits(pcie->reg_syscon, pcie->stg_arfun,
> > +			   STG_SYSCON_AXI4_SLVL_ARFUNC_MASK, 0);
> > +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
> > +			   STG_SYSCON_AXI4_SLVL_AWFUNC_MASK, 0);
> > +
> > +	plda_pcie_enable_root_port(plda);
> > +	plda_pcie_write_rc_bar(plda, 0);
> > +
> > +	/* PCIe PCI Standard Configuration Identification Settings. */
> > +	plda_pcie_set_standard_class(plda);
> > +
> > +	/*
> > +	 * The LTR message forwarding of PCIe Message Reception was set by core
> > +	 * as default, but the forward id & addr are also need to be reset.
> > +	 * If we do not disable LTR message forwarding here, or set a legal
> > +	 * forwarding address, the kernel will get stuck after this driver probe.
> > +	 * To workaround, disable the LTR message forwarding support on
> > +	 * PCIe Message Reception.
> > +	 */
> > +	plda_pcie_disable_ltr(plda);
> > +
> > +	/* Prefetchable memory window 64-bit addressing support */
> > +	plda_pcie_set_pref_win_64bit(plda);
> > +
> > +	/* Ensure that PERST has been asserted for at least 100 ms,
> > +	 * the sleep value is T_PVPERL from PCIe CEM spec r2.0 (Table 2-4)
> > +	 */
> > +	msleep(100);
> > +	if (pcie->reset_gpio)
> > +		gpiod_set_value_cansleep(pcie->reset_gpio, 0);
> > +
> > +	/* As the requirement in PCIe base spec r6.0, system (<=5GT/s) must
> > +	 * wait a minimum of 100 ms following exit from a conventional reset
> > +	 * before sending a configuration request to the device.
> > +	 */
> > +	msleep(100);
> > +
> > +	if (starfive_pcie_host_wait_for_link(pcie))
> > +		dev_info(dev, "port link down\n");
> > +
> > +	return ret;
> > +}
> > +
> > +static const struct plda_pcie_host_ops sf_host_ops = {
> > +	.host_init = starfive_pcie_host_init,
> > +	.host_deinit = starfive_pcie_host_deinit,
> > +};
> > +
> > +static int starfive_pcie_probe(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct starfive_jh7110_pcie *pcie;
> > +	struct plda_pcie_rp *plda;
> > +	int ret;
> > +
> > +	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> > +	if (!pcie)
> > +		return -ENOMEM;
> > +
> > +	plda = &pcie->plda;
> > +	plda->dev = dev;
> > +
> > +	ret = starfive_pcie_parse_dt(pcie, dev);
> > +	if (ret)
> > +		return ret;
> > +
> > +	plda->host_ops = &sf_host_ops;
> > +	plda->num_events = NUM_PLDA_EVENTS;
> > +	ret = plda_pcie_host_init(&pcie->plda, &starfive_pcie_ops);
> > +	if (ret)
> > +		return ret;
> > +
> > +	pm_runtime_enable(&pdev->dev);
> > +	pm_runtime_get_sync(&pdev->dev);
> > +	platform_set_drvdata(pdev, pcie);
> > +
> > +	return 0;
> > +}
> > +
> > +static void starfive_pcie_remove(struct platform_device *pdev)
> > +{
> > +	struct starfive_jh7110_pcie *pcie = platform_get_drvdata(pdev);
> > +
> > +	plda_pcie_host_deinit(&pcie->plda);
> > +	platform_set_drvdata(pdev, NULL);
> > +}
> > +
> > +static int starfive_pcie_suspend_noirq(struct device *dev)
> > +{
> > +	struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
> > +
> > +	if (!pcie)
> > +		return 0;
> > +
> > +	clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> > +	starfive_pcie_disable_phy(&pcie->plda);
> > +
> > +	return 0;
> > +}
> > +
> > +static int starfive_pcie_resume_noirq(struct device *dev)
> > +{
> > +	struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
> > +	int ret;
> > +
> > +	ret = starfive_pcie_enable_phy(dev, &pcie->plda);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
> > +	if (ret) {
> > +		dev_err(dev, "failed to enable clocks\n");
> > +		starfive_pcie_disable_phy(&pcie->plda);
> > +		return ret;
> > +	}
> > +
> > +	return ret;
> > +}
> > +
> > +static const struct dev_pm_ops starfive_pcie_pm_ops = {
> > +	NOIRQ_SYSTEM_SLEEP_PM_OPS(starfive_pcie_suspend_noirq,
> > +				  starfive_pcie_resume_noirq)
> > +};
> > +
> > +static const struct of_device_id starfive_pcie_of_match[] = {
> > +	{ .compatible = "starfive,jh7110-pcie"},
>
> Missing space before }
>
> > +	{ /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, starfive_pcie_of_match);
> > +
> > +static struct platform_driver starfive_pcie_driver = {
> > +	.driver = {
> > +		.name = "pcie-starfive",
> > +		.of_match_table = of_match_ptr(starfive_pcie_of_match),
> > +#ifdef CONFIG_PM_SLEEP
> > +		.pm = &starfive_pcie_pm_ops,
> > +#endif
>
> This can be just .pm = pm_sleep_ptr(&starfive_pcie_pm_ops),
>
> > +	},
> > +	.probe = starfive_pcie_probe,
> > +	.remove_new = starfive_pcie_remove,
> > +};
> > +module_platform_driver(starfive_pcie_driver);
> > +
> > +MODULE_DESCRIPTION("StarFive JH7110 PCIe host driver");
> > +MODULE_LICENSE("GPL v2");
> > --
> > 2.17.1
  
Minda Chen Sept. 19, 2023, 11:17 a.m. UTC | #3
On 2023/9/18 6:13, Emil Renner Berthing wrote:
> Minda Chen wrote:
>> Add StarFive JH7110 SoC PCIe controller platform
>> driver codes, and add host init/deinit to pcie-plda-host.c
>>
>> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
>> Co-developed-by: Kevin Xie <kevin.xie@starfivetech.com>
>> Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
>> ---
>>  MAINTAINERS                                  |   7 +
>>  drivers/pci/controller/plda/Kconfig          |  12 +
>>  drivers/pci/controller/plda/Makefile         |   1 +
>>  drivers/pci/controller/plda/pcie-plda-host.c | 121 ++++-
>>  drivers/pci/controller/plda/pcie-plda.h      |  91 +++-
>>  drivers/pci/controller/plda/pcie-starfive.c  | 461 +++++++++++++++++++
>>  6 files changed, 688 insertions(+), 5 deletions(-)
>>  create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index ebdb65e195ee..4632cd411a3d 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -16679,6 +16679,13 @@ S:	Maintained
>>  F:	Documentation/devicetree/bindings/pci/socionext,uniphier-pcie*
>>  F:	drivers/pci/controller/dwc/pcie-uniphier*
>>
>> +PCIE DRIVER FOR STARFIVE JH71x0
>> +M:	Kevin Xie <kevin.xie@starfivetech.com>
>> +L:	linux-pci@vger.kernel.org
>> +S:	Maintained
>> +F:	Documentation/devicetree/bindings/pci/starfive*
>> +F:	drivers/pci/controller/plda/pcie-starfive.c
>> +
>>  PCIE DRIVER FOR ST SPEAR13XX
>>  M:	Pratyush Anand <pratyush.anand@gmail.com>
>>  L:	linux-pci@vger.kernel.org
>> diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
>> index e54a82ee94f5..8de661730aa5 100644
>> --- a/drivers/pci/controller/plda/Kconfig
>> +++ b/drivers/pci/controller/plda/Kconfig
>> @@ -15,4 +15,16 @@ config PCIE_MICROCHIP_HOST
>>  	  Say Y here if you want kernel to support the Microchip AXI PCIe
>>  	  Host Bridge driver.
>>
>> +config PCIE_STARFIVE_HOST
>> +	tristate "StarFive PCIe host controller"
>> +	depends on OF && PCI_MSI
>> +	select PCIE_PLDA_HOST
>> +	help
>> +	  Say Y here if you want to support the StarFive PCIe controller
>> +	  in host mode. StarFive PCIe controller uses PLDA PCIe
>> +	  core.
>> +	  If you choose to build this driver as module it will
>> +	  be dynamically linked and module will be called
>> +	  pcie-starfive.ko
>> +
>>  endmenu
>> diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
>> index 4340ab007f44..0ac6851bed48 100644
>> --- a/drivers/pci/controller/plda/Makefile
>> +++ b/drivers/pci/controller/plda/Makefile
>> @@ -1,3 +1,4 @@
>>  # SPDX-License-Identifier: GPL-2.0
>>  obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
>>  obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
>> +obj-$(CONFIG_PCIE_STARFIVE_HOST) += pcie-starfive.o
>> diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
>> index 26e6cfd2eaba..8b32df477ad8 100644
>> --- a/drivers/pci/controller/plda/pcie-plda-host.c
>> +++ b/drivers/pci/controller/plda/pcie-plda-host.c
>> @@ -20,6 +20,15 @@
>>
>>  #include "pcie-plda.h"
>>
>> +void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
>> +				int where)
>> +{
>> +	struct plda_pcie_rp *pcie = bus->sysdata;
>> +
>> +	return pcie->config_base + PCIE_ECAM_OFFSET(bus->number, devfn, where);
>> +}
>> +EXPORT_SYMBOL_GPL(plda_pcie_map_bus);
>> +
>>  static void plda_handle_msi(struct irq_desc *desc)
>>  {
>>  	struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
>> @@ -370,6 +379,12 @@ static const struct plda_event_ops plda_event_ops = {
>>  	.get_events = plda_get_events,
>>  };
>>
>> +static const struct plda_event plda_default_event = {
>> +	.event_ops		= &plda_event_ops,
>> +	.intx_event		= EVENT_PM_MSI_INT_INTX,
>> +	.msi_event		= EVENT_PM_MSI_INT_MSI
>> +};
>> +
>>  static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port,
>>  				      const struct irq_domain_ops *ops)
>>  {
>> @@ -416,7 +431,6 @@ int plda_init_interrupts(struct platform_device *pdev,
>>  			 const struct plda_event *event)
>>  {
>>  	struct device *dev = &pdev->dev;
>> -	int irq;
>>  	int i, intx_irq, msi_irq, event_irq;
>>  	int ret;
>>  	const struct irq_domain_ops *irq_dom_ops;
>> @@ -434,8 +448,8 @@ int plda_init_interrupts(struct platform_device *pdev,
>>  		return ret;
>>  	}
>>
>> -	irq = platform_get_irq(pdev, 0);
>> -	if (irq < 0)
>> +	port->irq = platform_get_irq(pdev, 0);
>> +	if (port->irq < 0)
>>  		return -ENODEV;
> 
> Here you're dropping the local variable irq and just use port->irq directly..
> 
>>
>>  	port->event_ops = event->event_ops;
>> @@ -465,6 +479,7 @@ int plda_init_interrupts(struct platform_device *pdev,
>>  		dev_err(dev, "failed to map INTx interrupt\n");
>>  		return -ENXIO;
>>  	}
>> +	port->intx_irq = intx_irq;
> 
> ..but for intx_irq..
> 
>>
>>  	/* Plug the INTx chained handler */
>>  	irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
>> @@ -473,12 +488,13 @@ int plda_init_interrupts(struct platform_device *pdev,
>>  				     event->msi_event);
>>  	if (!msi_irq)
>>  		return -ENXIO;
>> +	port->msi_irq = msi_irq;
> 
> ..and msi_irq you're keeping the local variable. I think you should drop
> the local variables here too, or at least do the same for all of them.
> 
OK, remove all the local variables is better.
>>
>>  	/* Plug the MSI chained handler */
>>  	irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
>>
>>  	/* Plug the main event chained handler */
>> -	irq_set_chained_handler_and_data(irq, plda_handle_event, port);
>> +	irq_set_chained_handler_and_data(port->irq, plda_handle_event, port);
>>
>>  	return 0;
>>  }
>> @@ -544,3 +560,100 @@ int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
>>  	return 0;
>>  }
>>  EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
>> +
>> +static void plda_pcie_irq_domain_deinit(struct plda_pcie_rp *pcie)
>> +{
>> +	irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
>> +	irq_set_chained_handler_and_data(pcie->msi_irq, NULL, NULL);
>> +	irq_set_chained_handler_and_data(pcie->intx_irq, NULL, NULL);
>> +
>> +	irq_domain_remove(pcie->msi.msi_domain);
>> +	irq_domain_remove(pcie->msi.dev_domain);
>> +
>> +	irq_domain_remove(pcie->intx_domain);
>> +	irq_domain_remove(pcie->event_domain);
>> +}
>> +
>> +int plda_pcie_host_init(struct plda_pcie_rp *port, struct pci_ops *ops)
>> +{
>> +	struct resource *cfg_res;
>> +	struct device *dev = port->dev;
>> +	int ret;
>> +	struct pci_host_bridge *bridge;
>> +	struct platform_device *pdev = to_platform_device(dev);
> 
> This looks weird. Please order initialized variables first and maybe even do
> reverse christmas tree order. Eg. longeist lines first.
> 
OK, The same with other places.
>> +
>> +	port->bridge_addr =
>> +		devm_platform_ioremap_resource_byname(pdev, "apb");
>> +
>> +	if (IS_ERR(port->bridge_addr))
>> +		return dev_err_probe(dev, PTR_ERR(port->bridge_addr),
>> +				     "failed to map reg memory\n");
>> +
>> +	cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
>> +	if (!cfg_res)
>> +		return dev_err_probe(dev, -ENODEV,
>> +				     "failed to get config memory\n");
>> +
>> +	port->config_base = devm_ioremap_resource(dev, cfg_res);
>> +	if (IS_ERR(port->config_base))
>> +		return dev_err_probe(dev, PTR_ERR(port->config_base),
>> +				     "failed to map config memory\n");
>> +
>> +	port->phy = devm_phy_optional_get(dev, NULL);
>> +	if (IS_ERR(port->phy))
>> +		return dev_err_probe(dev, PTR_ERR(port->phy),
>> +				     "failed to get pcie phy\n");
>> +
>> +	bridge = devm_pci_alloc_host_bridge(dev, 0);
>> +	if (!bridge)
>> +		return dev_err_probe(dev, -ENOMEM,
>> +				     "failed to alloc bridge\n");
>> +
>> +	if (port->host_ops && port->host_ops->host_init) {
>> +		ret = port->host_ops->host_init(port);
>> +		if (ret)
>> +			return ret;
>> +	}
>> +
>> +	port->bridge = bridge;
>> +	plda_pcie_setup_window(port->bridge_addr, 0, cfg_res->start, 0,
>> +			       resource_size(cfg_res));
>> +	plda_pcie_setup_iomems(bridge, port);
>> +	plda_set_default_msi(&port->msi);
>> +	ret = plda_init_interrupts(pdev, port, &plda_default_event);
>> +	if (ret)
>> +		goto err_host;
>> +
>> +	/* Set default bus ops */
>> +	bridge->ops = ops;
>> +	bridge->sysdata = port;
>> +
>> +	ret = pci_host_probe(bridge);
>> +	if (ret < 0) {
>> +		dev_err(dev, "failed to pci host probe: %d\n", ret);
> 
> I think you mean:
> 
> dev_err_probe(dev, ret, "failed to probe pci host\n");
> 
I check with dev_err_probe, It is better than dev_err, I will replace this.
>> +		goto err_probe;
>> +	}
>> +
>> +	return ret;
>> +
>> +err_probe:
>> +	plda_pcie_irq_domain_deinit(port);
>> +err_host:
>> +	if (port->host_ops && port->host_ops->host_deinit)
>> +		port->host_ops->host_deinit(port);
>> +
>> +	return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(plda_pcie_host_init);
>> +
>> +void plda_pcie_host_deinit(struct plda_pcie_rp *port)
>> +{
>> +	pci_stop_root_bus(port->bridge->bus);
>> +	pci_remove_root_bus(port->bridge->bus);
>> +
>> +	plda_pcie_irq_domain_deinit(port);
>> +
>> +	if (port->host_ops && port->host_ops->host_deinit)
>> +		port->host_ops->host_deinit(port);
>> +}
>> +EXPORT_SYMBOL_GPL(plda_pcie_host_deinit);
>> diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
>> index b7420598a326..e571047d7944 100644
>> --- a/drivers/pci/controller/plda/pcie-plda.h
>> +++ b/drivers/pci/controller/plda/pcie-plda.h
>> @@ -6,14 +6,24 @@
>>  #ifndef _PCIE_PLDA_H
>>  #define _PCIE_PLDA_H
>>
>> +#include <linux/phy/phy.h>
>> +
>>  /* Number of MSI IRQs */
>>  #define PLDA_MAX_NUM_MSI_IRQS			32
>>
>>  /* PCIe Bridge Phy Regs */
>> +#define GEN_SETTINGS				0x80
>> +#define  RP_ENABLE				1
>> +#define PCIE_PCI_IDS_DW1			0x9c
>> +#define  IDS_CLASS_CODE_SHIFT			16
>>  #define PCIE_PCI_IRQ_DW0			0xa8
>>  #define  MSIX_CAP_MASK				BIT(31)
>>  #define  NUM_MSI_MSGS_MASK			GENMASK(6, 4)
>>  #define  NUM_MSI_MSGS_SHIFT			4
>> +#define PCI_MISC				0xb4
>> +#define  PHY_FUNCTION_DIS			BIT(15)
>> +#define PCIE_WINROM				0xfc
>> +#define  PREF_MEM_WIN_64_SUPPORT		BIT(3)
>>
>>  #define IMASK_LOCAL				0x180
>>  #define  DMA_END_ENGINE_0_MASK			0x00000000u
>> @@ -64,6 +74,8 @@
>>  #define ISTATUS_HOST				0x18c
>>  #define IMSI_ADDR				0x190
>>  #define ISTATUS_MSI				0x194
>> +#define PMSG_SUPPORT_RX				0x3f0
>> +#define  PMSG_LTR_SUPPORT			BIT(2)
>>
>>  /* PCIe Master table init defines */
>>  #define ATR0_PCIE_WIN0_SRCADDR_PARAM		0x600u
>> @@ -85,6 +97,8 @@
>>  #define  PCIE_TX_RX_INTERFACE			0x00000000u
>>  #define  PCIE_CONFIG_INTERFACE			0x00000001u
>>
>> +#define CONFIG_SPACE_ADDR			0x1000u
>> +
>>  #define ATR_ENTRY_SIZE				32
>>
>>  #define EVENT_A_ATR_EVT_POST_ERR		0
>> @@ -134,6 +148,11 @@ struct plda_event_ops {
>>  	u32 (*get_events)(struct plda_pcie_rp *pcie);
>>  };
>>
>> +struct plda_pcie_host_ops {
>> +	int (*host_init)(struct plda_pcie_rp *pcie);
>> +	void (*host_deinit)(struct plda_pcie_rp *pcie);
>> +};
>> +
>>  struct plda_msi {
>>  	struct mutex lock;		/* Protect used bitmap */
>>  	struct irq_domain *msi_domain;
>> @@ -145,12 +164,19 @@ struct plda_msi {
>>
>>  struct plda_pcie_rp {
>>  	struct device *dev;
>> +	struct pci_host_bridge *bridge;
>>  	struct irq_domain *intx_domain;
>>  	struct irq_domain *event_domain;
>>  	raw_spinlock_t lock;
>>  	struct plda_msi msi;
>>  	const struct plda_event_ops *event_ops;
>> +	const struct plda_pcie_host_ops *host_ops;
>> +	struct phy *phy;
>>  	void __iomem *bridge_addr;
>> +	void __iomem *config_base;
>> +	int irq;
>> +	int msi_irq;
>> +	int intx_irq;
>>  	int num_events;
>>  };
>>
>> @@ -163,6 +189,7 @@ struct plda_event {
>>  	int msi_event;
>>  };
>>
>> +void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn, int where);
>>  int plda_init_interrupts(struct platform_device *pdev,
>>  			 struct plda_pcie_rp *port,
>>  			 const struct plda_event *event);
>> @@ -171,4 +198,66 @@ void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
>>  			    size_t size);
>>  int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
>>  			   struct plda_pcie_rp *port);
>> -#endif
>> +int plda_pcie_host_init(struct plda_pcie_rp *pcie, struct pci_ops *ops);
>> +void plda_pcie_host_deinit(struct plda_pcie_rp *pcie);
>> +
>> +static inline void plda_set_default_msi(struct plda_msi *msi)
>> +{
>> +	msi->vector_phy = IMSI_ADDR;
>> +	msi->num_vectors = PLDA_MAX_NUM_MSI_IRQS;
>> +}
>> +
>> +static inline void plda_pcie_enable_root_port(struct plda_pcie_rp *plda)
>> +{
>> +	u32 value;
>> +
>> +	value = readl_relaxed(plda->bridge_addr + GEN_SETTINGS);
>> +	value |= RP_ENABLE;
>> +	writel_relaxed(value, plda->bridge_addr + GEN_SETTINGS);
>> +}
>> +
>> +static inline void plda_pcie_set_standard_class(struct plda_pcie_rp *plda)
>> +{
>> +	u32 value;
>> +
>> +	value = readl_relaxed(plda->bridge_addr + PCIE_PCI_IDS_DW1);
>> +	value &= 0xff;
>> +	value |= (PCI_CLASS_BRIDGE_PCI << IDS_CLASS_CODE_SHIFT);
> 
> This looks suspicious. You're clearing the lower 8 bits, but setting
> bits 16 and up. Also the parentheses are not strictly necessary.
> 
I will add comments to this.
>> +	writel_relaxed(value, plda->bridge_addr + PCIE_PCI_IDS_DW1);
>> +}
>> +
>> +static inline void plda_pcie_set_pref_win_64bit(struct plda_pcie_rp *plda)
>> +{
>> +	u32 value;
>> +
>> +	value = readl_relaxed(plda->bridge_addr + PCIE_WINROM);
>> +	value |= PREF_MEM_WIN_64_SUPPORT;
>> +	writel_relaxed(value, plda->bridge_addr + PCIE_WINROM);
>> +}
>> +
>> +static inline void plda_pcie_disable_ltr(struct plda_pcie_rp *plda)
>> +{
>> +	u32 value;
>> +
>> +	value = readl_relaxed(plda->bridge_addr + PMSG_SUPPORT_RX);
>> +	value &= ~PMSG_LTR_SUPPORT;
>> +	writel_relaxed(value, plda->bridge_addr + PMSG_SUPPORT_RX);
>> +}
>> +
>> +static inline void plda_pcie_disable_func(struct plda_pcie_rp *plda)
>> +{
>> +	u32 value;
>> +
>> +	value = readl_relaxed(plda->bridge_addr + PCI_MISC);
>> +	value |= PHY_FUNCTION_DIS;
>> +	writel_relaxed(value, plda->bridge_addr + PCI_MISC);
>> +}
>> +
>> +static inline void plda_pcie_write_rc_bar(struct plda_pcie_rp *plda, u64 val)
>> +{
>> +	void __iomem *addr = plda->bridge_addr + CONFIG_SPACE_ADDR;
>> +
>> +	writel_relaxed(val & 0xffffffff, addr + PCI_BASE_ADDRESS_0);
>> +	writel_relaxed(val >> 32, addr + PCI_BASE_ADDRESS_1);
> 
> Consider using lower_32_bits(val) and upper_32_bits(val) here.
> 
>> +}
>> +#endif /* _PCIE_PLDA_H */
>> diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
>> new file mode 100644
>> index 000000000000..42099fef0d7d
>> --- /dev/null
>> +++ b/drivers/pci/controller/plda/pcie-starfive.c
>> @@ -0,0 +1,461 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * PCIe host controller driver for StarFive JH7110 Soc.
>> + *
>> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
>> + */
>> +
>> +#include <linux/bitfield.h>
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/kernel.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/module.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/of_pci.h>
>> +#include <linux/pci.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/regmap.h>
>> +#include <linux/reset.h>
>> +#include "../../pci.h"
>> +
>> +#include "pcie-plda.h"
>> +
>> +#define PCIE_FUNC_NUM			4
>> +
>> +/* system control */
>> +#define STG_SYSCON_PCIE0_BASE			0x48
>> +#define STG_SYSCON_PCIE1_BASE			0x1f8
>> +
>> +#define STG_SYSCON_ARFUNC_OFFSET		0x78
>> +#define STG_SYSCON_AXI4_SLVL_ARFUNC_MASK	 GENMASK(22, 8)
>> +#define STG_SYSCON_AXI4_SLVL_PHY_ARFUNC(x)	 FIELD_PREP(GENMASK(20, 17), x)
>> +#define STG_SYSCON_AWFUNC_OFFSET		0x7c
>> +#define STG_SYSCON_AXI4_SLVL_AWFUNC_MASK	 GENMASK(14, 0)
>> +#define STG_SYSCON_AXI4_SLVL_PHY_AWFUNC(x)	 FIELD_PREP(GENMASK(12, 9), x)
>> +#define STG_SYSCON_CLKREQ			 BIT(22)
>> +#define STG_SYSCON_CKREF_SRC_MASK		 GENMASK(19, 18)
>> +#define STG_SYSCON_RP_NEP_OFFSET		0xe8
>> +#define STG_SYSCON_K_RP_NEP			 BIT(8)
>> +#define STG_SYSCON_LNKSTA_OFFSET		0x170
>> +#define DATA_LINK_ACTIVE			 BIT(5)
>> +
>> +/* Parameters for the waiting for link up routine */
>> +#define LINK_WAIT_MAX_RETRIES	10
>> +#define LINK_WAIT_USLEEP_MIN	90000
>> +#define LINK_WAIT_USLEEP_MAX	100000
>> +
>> +struct starfive_jh7110_pcie {
>> +	struct plda_pcie_rp plda;
>> +	struct reset_control *resets;
>> +	struct clk_bulk_data *clks;
>> +	struct regmap *reg_syscon;
>> +	struct gpio_desc *power_gpio;
>> +	struct gpio_desc *reset_gpio;
>> +
>> +	u32 stg_arfun;
>> +	u32 stg_awfun;
>> +	u32 stg_rp_nep;
>> +	u32 stg_lnksta;
>> +
>> +	int num_clks;
>> +};
>> +
>> +/*
>> + * The BAR0/1 of bridge should be hidden during enumeration to
>> + * avoid the sizing and resource allocation by PCIe core.
>> + */
>> +static bool starfive_pcie_hide_rc_bar(struct pci_bus *bus, unsigned int  devfn,
>> +				      int offset)
>> +{
>> +	if (pci_is_root_bus(bus) && !devfn &&
>> +	    (offset == PCI_BASE_ADDRESS_0 || offset == PCI_BASE_ADDRESS_1))
>> +		return true;
>> +
>> +	return false;
>> +}
>> +
>> +static int starfive_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
>> +				      int where, int size, u32 value)
>> +{
>> +	if (starfive_pcie_hide_rc_bar(bus, devfn, where))
>> +		return PCIBIOS_BAD_REGISTER_NUMBER;
>> +
>> +	return pci_generic_config_write(bus, devfn, where, size, value);
>> +}
>> +
>> +static int starfive_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
>> +				     int where, int size, u32 *value)
>> +{
>> +	if (starfive_pcie_hide_rc_bar(bus, devfn, where))
>> +		return PCIBIOS_BAD_REGISTER_NUMBER;
>> +
>> +	return pci_generic_config_read(bus, devfn, where, size, value);
>> +}
>> +
>> +static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie, struct device *dev)
>> +{
>> +	int domain_nr, stg_pcie_base;
>> +
>> +	pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
>> +	if (pcie->num_clks < 0)
>> +		return dev_err_probe(dev, -ENODEV,
>> +			"failed to get pcie clocks\n");
>> +
>> +	pcie->resets = devm_reset_control_array_get_exclusive(dev);
>> +	if (IS_ERR(pcie->resets))
>> +		return dev_err_probe(dev, PTR_ERR(pcie->resets),
>> +			"failed to get pcie resets");
>> +
>> +	pcie->reg_syscon =
>> +		syscon_regmap_lookup_by_phandle(dev->of_node,
>> +						"starfive,stg-syscon");
>> +
>> +	if (IS_ERR(pcie->reg_syscon))
>> +		return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
>> +			"failed to parse starfive,stg-syscon\n");
>> +
>> +	domain_nr = of_get_pci_domain_nr(dev->of_node);
>> +
>> +	if (domain_nr < 0 || domain_nr > 1)
>> +		return dev_err_probe(dev, -ENODEV,
>> +			"failed to get valid pcie id\n");
>> +
>> +	if (domain_nr == 0)
>> +		stg_pcie_base = STG_SYSCON_PCIE0_BASE;
>> +	else
>> +		stg_pcie_base = STG_SYSCON_PCIE1_BASE;
> 
> It seems you only need the domain_nr for the determining this offset into the
> stg_syscon. Since this is already specific to the JH7110 SoC, wouldn't it be
> safer to match on the 0x2b000000/0x2c000000 or 0x940000000/0x9c0000000
> address of the peripheral instead?
> 
Maybe this codes not just bind to JH7110 SoC. 
>> +
>> +	pcie->stg_arfun = stg_pcie_base + STG_SYSCON_ARFUNC_OFFSET;
>> +	pcie->stg_awfun = stg_pcie_base + STG_SYSCON_AWFUNC_OFFSET;
>> +	pcie->stg_rp_nep = stg_pcie_base + STG_SYSCON_RP_NEP_OFFSET;
>> +	pcie->stg_lnksta = stg_pcie_base + STG_SYSCON_LNKSTA_OFFSET;
> 
> These offsets are all the same for both pcie0 and pcie1 so why do you need a
> variable for each? Eg. why not just
> 
> if (domain_nr == 0)
> 	pcie->stg_base = STG_SYSCON_PCIE0_BASE;
> else
> 	pcie->stg_base = STG_SYSCON_PCIE1_BASE;
> 
> ..and then add add those static offsets where needed?
> 
OK. I will try to modify this.
>> +
>> +	pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
>> +	if (IS_ERR(pcie->reset_gpio)) {
>> +		dev_warn(dev, "failed to get perst-gpio\n");
> 
> Why is this a warn when you actually error out? I think you mean
> 
> return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio, "failed to get
> reset GPIO\n");
> 
>> +		return -EINVAL;
>> +	}
>> +
>> +	pcie->power_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
>> +	if (IS_ERR(pcie->power_gpio)) {
>> +		dev_warn(dev, "failed to get power-gpio\n");
>> +		return -EINVAL;
> 
> return dev_err_probe(dev, PTR_ERR(pcie->power_gpio), "failed to get
> power GPIO\n");
> 
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static struct pci_ops starfive_pcie_ops = {
>> +	.map_bus	= plda_pcie_map_bus,
>> +	.read           = starfive_pcie_config_read,
>> +	.write          = starfive_pcie_config_write,
>> +};
>> +
>> +static int starfive_pcie_clk_rst_init(struct starfive_jh7110_pcie *pcie)
>> +{
>> +	int ret;
>> +	struct device *dev = pcie->plda.dev;
> 
> Again, please order initialized variables first.
> 
>> +
>> +	ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
>> +	if (ret) {
>> +		dev_err(dev, "failed to enable clocks\n");
>> +		return ret;
> 
> return dev_err_probe(dev, ret, "failed to enable clocks\n");
> 
>> +	}
>> +
>> +	ret = reset_control_deassert(pcie->resets);
>> +	if (ret) {
>> +		clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
>> +		dev_err(dev, "failed to resets\n");
> 
> I think you mean
> return dev_err_probe(dev, ret, "failed to deassert resets\n");
> 
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +static void starfive_pcie_clk_rst_deinit(struct starfive_jh7110_pcie *pcie)
>> +{
>> +	reset_control_assert(pcie->resets);
>> +	clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
>> +}
>> +
>> +static bool starfive_pcie_link_up(struct plda_pcie_rp *plda)
>> +{
>> +	struct starfive_jh7110_pcie *pcie =
>> +		container_of(plda, struct starfive_jh7110_pcie, plda);
>> +	struct device *dev = pcie->plda.dev;
> 
> This is only used once below, so just use pcie->plda.dev directly there.
> 
OK, thanks
>> +	int ret;
>> +	u32 stg_reg_val;
>> +
>> +	ret = regmap_read(pcie->reg_syscon, pcie->stg_lnksta, &stg_reg_val);
>> +	if (ret) {
>> +		dev_err(dev, "failed to read link status\n");
>> +		return false;
>> +	}
>> +
>> +	if (stg_reg_val & DATA_LINK_ACTIVE)
>> +		return true;
>> +
>> +	return false;
> 
> These last 4 lines is just "return stg_reg_val & DATA_LINK_ACTIVE;" right?
> 
OK
>> +}
>> +
>> +static int starfive_pcie_host_wait_for_link(struct starfive_jh7110_pcie *pcie)
>> +{
>> +	struct device *dev = pcie->plda.dev;
> 
> Only used once, just inline.
> 
>> +	int retries;
>> +
>> +	/* Check if the link is up or not */
>> +	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
>> +		if (starfive_pcie_link_up(&pcie->plda)) {
>> +			dev_info(dev, "port link up\n");
>> +			return 0;
>> +		}
>> +		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
>> +	}
>> +
>> +	return -ETIMEDOUT;
>> +}
>> +
>> +static int starfive_pcie_enable_phy(struct device *dev, struct plda_pcie_rp *pcie)
>> +{
>> +	int ret;
>> +
>> +	if (!pcie->phy)
>> +		return 0;
>> +
>> +	ret = phy_init(pcie->phy);
>> +	if (ret)
>> +		return dev_err_probe(dev, ret,
>> +			"failed to initialize pcie phy\n");
>> +
>> +	ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
>> +	if (ret) {
>> +		dev_err(dev, "failed to set pcie mode\n");
>> +		goto err_phy_on;
>> +	}
>> +
>> +	ret = phy_power_on(pcie->phy);
>> +	if (ret) {
>> +		dev_err(dev, "failed to power on pcie phy\n");
>> +		goto err_phy_on;
>> +	}
>> +
>> +	return 0;
>> +
>> +err_phy_on:
>> +	phy_exit(pcie->phy);
>> +	return ret;
>> +}
>> +
>> +static void starfive_pcie_disable_phy(struct plda_pcie_rp *pcie)
>> +{
>> +	phy_power_off(pcie->phy);
>> +	phy_exit(pcie->phy);
>> +}
>> +
>> +static void starfive_pcie_host_deinit(struct plda_pcie_rp *plda)
>> +{
>> +	struct starfive_jh7110_pcie *pcie =
>> +		container_of(plda, struct starfive_jh7110_pcie, plda);
>> +
>> +	starfive_pcie_clk_rst_deinit(pcie);
>> +	if (pcie->power_gpio)
>> +		gpiod_set_value_cansleep(pcie->power_gpio, 0);
>> +	starfive_pcie_disable_phy(plda);
>> +}
>> +
>> +static int starfive_pcie_host_init(struct plda_pcie_rp *plda)
>> +{
>> +	int i;
>> +	struct starfive_jh7110_pcie *pcie =
>> +		container_of(plda, struct starfive_jh7110_pcie, plda);
>> +	struct device *dev = plda->dev;
>> +	int ret;
> 
> Weird ordering again.
> 
>> +
>> +	ret = starfive_pcie_enable_phy(dev, plda);
>> +	if (ret)
>> +		return ret;
>> +
>> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_rp_nep,
>> +			   STG_SYSCON_K_RP_NEP, STG_SYSCON_K_RP_NEP);
>> +
>> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
>> +			   STG_SYSCON_CKREF_SRC_MASK,
>> +			   FIELD_PREP(STG_SYSCON_CKREF_SRC_MASK, 2));
>> +
>> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
>> +			   STG_SYSCON_CLKREQ, STG_SYSCON_CLKREQ);
>> +
>> +	ret = starfive_pcie_clk_rst_init(pcie);
>> +	if (ret)
>> +		return ret;
>> +
>> +	if (pcie->power_gpio)
>> +		gpiod_set_value_cansleep(pcie->power_gpio, 1);
>> +
>> +	if (pcie->reset_gpio)
>> +		gpiod_set_value_cansleep(pcie->reset_gpio, 1);
>> +
>> +	/* Disable physical functions except #0 */
>> +	for (i = 1; i < PCIE_FUNC_NUM; i++) {
>> +		regmap_update_bits(pcie->reg_syscon,
>> +				   pcie->stg_arfun,
>> +				   STG_SYSCON_AXI4_SLVL_ARFUNC_MASK,
>> +				   STG_SYSCON_AXI4_SLVL_PHY_ARFUNC(i));
>> +
>> +		regmap_update_bits(pcie->reg_syscon,
>> +				   pcie->stg_awfun,
>> +				   STG_SYSCON_AXI4_SLVL_AWFUNC_MASK,
>> +				   STG_SYSCON_AXI4_SLVL_PHY_AWFUNC(i));
>> +
>> +		plda_pcie_disable_func(plda);
>> +	}
>> +
>> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_arfun,
>> +			   STG_SYSCON_AXI4_SLVL_ARFUNC_MASK, 0);
>> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
>> +			   STG_SYSCON_AXI4_SLVL_AWFUNC_MASK, 0);
>> +
>> +	plda_pcie_enable_root_port(plda);
>> +	plda_pcie_write_rc_bar(plda, 0);
>> +
>> +	/* PCIe PCI Standard Configuration Identification Settings. */
>> +	plda_pcie_set_standard_class(plda);
>> +
>> +	/*
>> +	 * The LTR message forwarding of PCIe Message Reception was set by core
>> +	 * as default, but the forward id & addr are also need to be reset.
>> +	 * If we do not disable LTR message forwarding here, or set a legal
>> +	 * forwarding address, the kernel will get stuck after this driver probe.
>> +	 * To workaround, disable the LTR message forwarding support on
>> +	 * PCIe Message Reception.
>> +	 */
>> +	plda_pcie_disable_ltr(plda);
>> +
>> +	/* Prefetchable memory window 64-bit addressing support */
>> +	plda_pcie_set_pref_win_64bit(plda);
>> +
>> +	/* Ensure that PERST has been asserted for at least 100 ms,
>> +	 * the sleep value is T_PVPERL from PCIe CEM spec r2.0 (Table 2-4)
>> +	 */
>> +	msleep(100);
>> +	if (pcie->reset_gpio)
>> +		gpiod_set_value_cansleep(pcie->reset_gpio, 0);
>> +
>> +	/* As the requirement in PCIe base spec r6.0, system (<=5GT/s) must
>> +	 * wait a minimum of 100 ms following exit from a conventional reset
>> +	 * before sending a configuration request to the device.
>> +	 */
>> +	msleep(100);
>> +
>> +	if (starfive_pcie_host_wait_for_link(pcie))
>> +		dev_info(dev, "port link down\n");
>> +
>> +	return ret;
>> +}
>> +
>> +static const struct plda_pcie_host_ops sf_host_ops = {
>> +	.host_init = starfive_pcie_host_init,
>> +	.host_deinit = starfive_pcie_host_deinit,
>> +};
>> +
>> +static int starfive_pcie_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct starfive_jh7110_pcie *pcie;
>> +	struct plda_pcie_rp *plda;
>> +	int ret;
>> +
>> +	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
>> +	if (!pcie)
>> +		return -ENOMEM;
>> +
>> +	plda = &pcie->plda;
>> +	plda->dev = dev;
>> +
>> +	ret = starfive_pcie_parse_dt(pcie, dev);
>> +	if (ret)
>> +		return ret;
>> +
>> +	plda->host_ops = &sf_host_ops;
>> +	plda->num_events = NUM_PLDA_EVENTS;
>> +	ret = plda_pcie_host_init(&pcie->plda, &starfive_pcie_ops);
>> +	if (ret)
>> +		return ret;
>> +
>> +	pm_runtime_enable(&pdev->dev);
>> +	pm_runtime_get_sync(&pdev->dev);
>> +	platform_set_drvdata(pdev, pcie);
>> +
>> +	return 0;
>> +}
>> +
>> +static void starfive_pcie_remove(struct platform_device *pdev)
>> +{
>> +	struct starfive_jh7110_pcie *pcie = platform_get_drvdata(pdev);
>> +
>> +	plda_pcie_host_deinit(&pcie->plda);
>> +	platform_set_drvdata(pdev, NULL);
>> +}
>> +
>> +static int starfive_pcie_suspend_noirq(struct device *dev)
>> +{
>> +	struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
>> +
>> +	if (!pcie)
>> +		return 0;
>> +
>> +	clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
>> +	starfive_pcie_disable_phy(&pcie->plda);
>> +
>> +	return 0;
>> +}
>> +
>> +static int starfive_pcie_resume_noirq(struct device *dev)
>> +{
>> +	struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
>> +	int ret;
>> +
>> +	ret = starfive_pcie_enable_phy(dev, &pcie->plda);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
>> +	if (ret) {
>> +		dev_err(dev, "failed to enable clocks\n");
>> +		starfive_pcie_disable_phy(&pcie->plda);
>> +		return ret;
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +static const struct dev_pm_ops starfive_pcie_pm_ops = {
>> +	NOIRQ_SYSTEM_SLEEP_PM_OPS(starfive_pcie_suspend_noirq,
>> +				  starfive_pcie_resume_noirq)
>> +};
>> +
>> +static const struct of_device_id starfive_pcie_of_match[] = {
>> +	{ .compatible = "starfive,jh7110-pcie"},
> 
> Missing space before }
> 
>> +	{ /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, starfive_pcie_of_match);
>> +
>> +static struct platform_driver starfive_pcie_driver = {
>> +	.driver = {
>> +		.name = "pcie-starfive",
>> +		.of_match_table = of_match_ptr(starfive_pcie_of_match),
>> +#ifdef CONFIG_PM_SLEEP
>> +		.pm = &starfive_pcie_pm_ops,
>> +#endif
> 
> This can be just .pm = pm_sleep_ptr(&starfive_pcie_pm_ops),
> 
OK
>> +	},
>> +	.probe = starfive_pcie_probe,
>> +	.remove_new = starfive_pcie_remove,
>> +};
>> +module_platform_driver(starfive_pcie_driver);
>> +
>> +MODULE_DESCRIPTION("StarFive JH7110 PCIe host driver");
>> +MODULE_LICENSE("GPL v2");
>> --
>> 2.17.1
  
Emil Renner Berthing Sept. 19, 2023, 11:34 a.m. UTC | #4
Minda Chen wrote:
>
>
> On 2023/9/18 6:13, Emil Renner Berthing wrote:
> > Minda Chen wrote:
> >> Add StarFive JH7110 SoC PCIe controller platform
> >> driver codes, and add host init/deinit to pcie-plda-host.c
> >>
> >> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> >> Co-developed-by: Kevin Xie <kevin.xie@starfivetech.com>
> >> Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
> >> ---
> >>  MAINTAINERS                                  |   7 +
> >>  drivers/pci/controller/plda/Kconfig          |  12 +
> >>  drivers/pci/controller/plda/Makefile         |   1 +
> >>  drivers/pci/controller/plda/pcie-plda-host.c | 121 ++++-
> >>  drivers/pci/controller/plda/pcie-plda.h      |  91 +++-
> >>  drivers/pci/controller/plda/pcie-starfive.c  | 461 +++++++++++++++++++
> >>  6 files changed, 688 insertions(+), 5 deletions(-)
> >>  create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
> >>
> >> diff --git a/MAINTAINERS b/MAINTAINERS
> >> index ebdb65e195ee..4632cd411a3d 100644
> >> --- a/MAINTAINERS
> >> +++ b/MAINTAINERS
> >> @@ -16679,6 +16679,13 @@ S:	Maintained
> >>  F:	Documentation/devicetree/bindings/pci/socionext,uniphier-pcie*
> >>  F:	drivers/pci/controller/dwc/pcie-uniphier*
> >>
> >> +PCIE DRIVER FOR STARFIVE JH71x0
> >> +M:	Kevin Xie <kevin.xie@starfivetech.com>
> >> +L:	linux-pci@vger.kernel.org
> >> +S:	Maintained
> >> +F:	Documentation/devicetree/bindings/pci/starfive*
> >> +F:	drivers/pci/controller/plda/pcie-starfive.c
> >> +
> >>  PCIE DRIVER FOR ST SPEAR13XX
> >>  M:	Pratyush Anand <pratyush.anand@gmail.com>
> >>  L:	linux-pci@vger.kernel.org
> >> diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
> >> index e54a82ee94f5..8de661730aa5 100644
> >> --- a/drivers/pci/controller/plda/Kconfig
> >> +++ b/drivers/pci/controller/plda/Kconfig
> >> @@ -15,4 +15,16 @@ config PCIE_MICROCHIP_HOST
> >>  	  Say Y here if you want kernel to support the Microchip AXI PCIe
> >>  	  Host Bridge driver.
> >>
> >> +config PCIE_STARFIVE_HOST
> >> +	tristate "StarFive PCIe host controller"
> >> +	depends on OF && PCI_MSI
> >> +	select PCIE_PLDA_HOST
> >> +	help
> >> +	  Say Y here if you want to support the StarFive PCIe controller
> >> +	  in host mode. StarFive PCIe controller uses PLDA PCIe
> >> +	  core.
> >> +	  If you choose to build this driver as module it will
> >> +	  be dynamically linked and module will be called
> >> +	  pcie-starfive.ko
> >> +
> >>  endmenu
> >> diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
> >> index 4340ab007f44..0ac6851bed48 100644
> >> --- a/drivers/pci/controller/plda/Makefile
> >> +++ b/drivers/pci/controller/plda/Makefile
> >> @@ -1,3 +1,4 @@
> >>  # SPDX-License-Identifier: GPL-2.0
> >>  obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
> >>  obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
> >> +obj-$(CONFIG_PCIE_STARFIVE_HOST) += pcie-starfive.o
> >> diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
> >> index 26e6cfd2eaba..8b32df477ad8 100644
> >> --- a/drivers/pci/controller/plda/pcie-plda-host.c
> >> +++ b/drivers/pci/controller/plda/pcie-plda-host.c
> >> @@ -20,6 +20,15 @@
> >>
> >>  #include "pcie-plda.h"
> >>
> >> +void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
> >> +				int where)
> >> +{
> >> +	struct plda_pcie_rp *pcie = bus->sysdata;
> >> +
> >> +	return pcie->config_base + PCIE_ECAM_OFFSET(bus->number, devfn, where);
> >> +}
> >> +EXPORT_SYMBOL_GPL(plda_pcie_map_bus);
> >> +
> >>  static void plda_handle_msi(struct irq_desc *desc)
> >>  {
> >>  	struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
> >> @@ -370,6 +379,12 @@ static const struct plda_event_ops plda_event_ops = {
> >>  	.get_events = plda_get_events,
> >>  };
> >>
> >> +static const struct plda_event plda_default_event = {
> >> +	.event_ops		= &plda_event_ops,
> >> +	.intx_event		= EVENT_PM_MSI_INT_INTX,
> >> +	.msi_event		= EVENT_PM_MSI_INT_MSI
> >> +};
> >> +
> >>  static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port,
> >>  				      const struct irq_domain_ops *ops)
> >>  {
> >> @@ -416,7 +431,6 @@ int plda_init_interrupts(struct platform_device *pdev,
> >>  			 const struct plda_event *event)
> >>  {
> >>  	struct device *dev = &pdev->dev;
> >> -	int irq;
> >>  	int i, intx_irq, msi_irq, event_irq;
> >>  	int ret;
> >>  	const struct irq_domain_ops *irq_dom_ops;
> >> @@ -434,8 +448,8 @@ int plda_init_interrupts(struct platform_device *pdev,
> >>  		return ret;
> >>  	}
> >>
> >> -	irq = platform_get_irq(pdev, 0);
> >> -	if (irq < 0)
> >> +	port->irq = platform_get_irq(pdev, 0);
> >> +	if (port->irq < 0)
> >>  		return -ENODEV;
> >
> > Here you're dropping the local variable irq and just use port->irq directly..
> >
> >>
> >>  	port->event_ops = event->event_ops;
> >> @@ -465,6 +479,7 @@ int plda_init_interrupts(struct platform_device *pdev,
> >>  		dev_err(dev, "failed to map INTx interrupt\n");
> >>  		return -ENXIO;
> >>  	}
> >> +	port->intx_irq = intx_irq;
> >
> > ..but for intx_irq..
> >
> >>
> >>  	/* Plug the INTx chained handler */
> >>  	irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
> >> @@ -473,12 +488,13 @@ int plda_init_interrupts(struct platform_device *pdev,
> >>  				     event->msi_event);
> >>  	if (!msi_irq)
> >>  		return -ENXIO;
> >> +	port->msi_irq = msi_irq;
> >
> > ..and msi_irq you're keeping the local variable. I think you should drop
> > the local variables here too, or at least do the same for all of them.
> >
> OK, remove all the local variables is better.
> >>
> >>  	/* Plug the MSI chained handler */
> >>  	irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
> >>
> >>  	/* Plug the main event chained handler */
> >> -	irq_set_chained_handler_and_data(irq, plda_handle_event, port);
> >> +	irq_set_chained_handler_and_data(port->irq, plda_handle_event, port);
> >>
> >>  	return 0;
> >>  }
> >> @@ -544,3 +560,100 @@ int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> >>  	return 0;
> >>  }
> >>  EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
> >> +
> >> +static void plda_pcie_irq_domain_deinit(struct plda_pcie_rp *pcie)
> >> +{
> >> +	irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
> >> +	irq_set_chained_handler_and_data(pcie->msi_irq, NULL, NULL);
> >> +	irq_set_chained_handler_and_data(pcie->intx_irq, NULL, NULL);
> >> +
> >> +	irq_domain_remove(pcie->msi.msi_domain);
> >> +	irq_domain_remove(pcie->msi.dev_domain);
> >> +
> >> +	irq_domain_remove(pcie->intx_domain);
> >> +	irq_domain_remove(pcie->event_domain);
> >> +}
> >> +
> >> +int plda_pcie_host_init(struct plda_pcie_rp *port, struct pci_ops *ops)
> >> +{
> >> +	struct resource *cfg_res;
> >> +	struct device *dev = port->dev;
> >> +	int ret;
> >> +	struct pci_host_bridge *bridge;
> >> +	struct platform_device *pdev = to_platform_device(dev);
> >
> > This looks weird. Please order initialized variables first and maybe even do
> > reverse christmas tree order. Eg. longeist lines first.
> >
> OK, The same with other places.
> >> +
> >> +	port->bridge_addr =
> >> +		devm_platform_ioremap_resource_byname(pdev, "apb");
> >> +
> >> +	if (IS_ERR(port->bridge_addr))
> >> +		return dev_err_probe(dev, PTR_ERR(port->bridge_addr),
> >> +				     "failed to map reg memory\n");
> >> +
> >> +	cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
> >> +	if (!cfg_res)
> >> +		return dev_err_probe(dev, -ENODEV,
> >> +				     "failed to get config memory\n");
> >> +
> >> +	port->config_base = devm_ioremap_resource(dev, cfg_res);
> >> +	if (IS_ERR(port->config_base))
> >> +		return dev_err_probe(dev, PTR_ERR(port->config_base),
> >> +				     "failed to map config memory\n");
> >> +
> >> +	port->phy = devm_phy_optional_get(dev, NULL);
> >> +	if (IS_ERR(port->phy))
> >> +		return dev_err_probe(dev, PTR_ERR(port->phy),
> >> +				     "failed to get pcie phy\n");
> >> +
> >> +	bridge = devm_pci_alloc_host_bridge(dev, 0);
> >> +	if (!bridge)
> >> +		return dev_err_probe(dev, -ENOMEM,
> >> +				     "failed to alloc bridge\n");
> >> +
> >> +	if (port->host_ops && port->host_ops->host_init) {
> >> +		ret = port->host_ops->host_init(port);
> >> +		if (ret)
> >> +			return ret;
> >> +	}
> >> +
> >> +	port->bridge = bridge;
> >> +	plda_pcie_setup_window(port->bridge_addr, 0, cfg_res->start, 0,
> >> +			       resource_size(cfg_res));
> >> +	plda_pcie_setup_iomems(bridge, port);
> >> +	plda_set_default_msi(&port->msi);
> >> +	ret = plda_init_interrupts(pdev, port, &plda_default_event);
> >> +	if (ret)
> >> +		goto err_host;
> >> +
> >> +	/* Set default bus ops */
> >> +	bridge->ops = ops;
> >> +	bridge->sysdata = port;
> >> +
> >> +	ret = pci_host_probe(bridge);
> >> +	if (ret < 0) {
> >> +		dev_err(dev, "failed to pci host probe: %d\n", ret);
> >
> > I think you mean:
> >
> > dev_err_probe(dev, ret, "failed to probe pci host\n");
> >
> I check with dev_err_probe, It is better than dev_err, I will replace this.
> >> +		goto err_probe;
> >> +	}
> >> +
> >> +	return ret;
> >> +
> >> +err_probe:
> >> +	plda_pcie_irq_domain_deinit(port);
> >> +err_host:
> >> +	if (port->host_ops && port->host_ops->host_deinit)
> >> +		port->host_ops->host_deinit(port);
> >> +
> >> +	return ret;
> >> +}
> >> +EXPORT_SYMBOL_GPL(plda_pcie_host_init);
> >> +
> >> +void plda_pcie_host_deinit(struct plda_pcie_rp *port)
> >> +{
> >> +	pci_stop_root_bus(port->bridge->bus);
> >> +	pci_remove_root_bus(port->bridge->bus);
> >> +
> >> +	plda_pcie_irq_domain_deinit(port);
> >> +
> >> +	if (port->host_ops && port->host_ops->host_deinit)
> >> +		port->host_ops->host_deinit(port);
> >> +}
> >> +EXPORT_SYMBOL_GPL(plda_pcie_host_deinit);
> >> diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
> >> index b7420598a326..e571047d7944 100644
> >> --- a/drivers/pci/controller/plda/pcie-plda.h
> >> +++ b/drivers/pci/controller/plda/pcie-plda.h
> >> @@ -6,14 +6,24 @@
> >>  #ifndef _PCIE_PLDA_H
> >>  #define _PCIE_PLDA_H
> >>
> >> +#include <linux/phy/phy.h>
> >> +
> >>  /* Number of MSI IRQs */
> >>  #define PLDA_MAX_NUM_MSI_IRQS			32
> >>
> >>  /* PCIe Bridge Phy Regs */
> >> +#define GEN_SETTINGS				0x80
> >> +#define  RP_ENABLE				1
> >> +#define PCIE_PCI_IDS_DW1			0x9c
> >> +#define  IDS_CLASS_CODE_SHIFT			16
> >>  #define PCIE_PCI_IRQ_DW0			0xa8
> >>  #define  MSIX_CAP_MASK				BIT(31)
> >>  #define  NUM_MSI_MSGS_MASK			GENMASK(6, 4)
> >>  #define  NUM_MSI_MSGS_SHIFT			4
> >> +#define PCI_MISC				0xb4
> >> +#define  PHY_FUNCTION_DIS			BIT(15)
> >> +#define PCIE_WINROM				0xfc
> >> +#define  PREF_MEM_WIN_64_SUPPORT		BIT(3)
> >>
> >>  #define IMASK_LOCAL				0x180
> >>  #define  DMA_END_ENGINE_0_MASK			0x00000000u
> >> @@ -64,6 +74,8 @@
> >>  #define ISTATUS_HOST				0x18c
> >>  #define IMSI_ADDR				0x190
> >>  #define ISTATUS_MSI				0x194
> >> +#define PMSG_SUPPORT_RX				0x3f0
> >> +#define  PMSG_LTR_SUPPORT			BIT(2)
> >>
> >>  /* PCIe Master table init defines */
> >>  #define ATR0_PCIE_WIN0_SRCADDR_PARAM		0x600u
> >> @@ -85,6 +97,8 @@
> >>  #define  PCIE_TX_RX_INTERFACE			0x00000000u
> >>  #define  PCIE_CONFIG_INTERFACE			0x00000001u
> >>
> >> +#define CONFIG_SPACE_ADDR			0x1000u
> >> +
> >>  #define ATR_ENTRY_SIZE				32
> >>
> >>  #define EVENT_A_ATR_EVT_POST_ERR		0
> >> @@ -134,6 +148,11 @@ struct plda_event_ops {
> >>  	u32 (*get_events)(struct plda_pcie_rp *pcie);
> >>  };
> >>
> >> +struct plda_pcie_host_ops {
> >> +	int (*host_init)(struct plda_pcie_rp *pcie);
> >> +	void (*host_deinit)(struct plda_pcie_rp *pcie);
> >> +};
> >> +
> >>  struct plda_msi {
> >>  	struct mutex lock;		/* Protect used bitmap */
> >>  	struct irq_domain *msi_domain;
> >> @@ -145,12 +164,19 @@ struct plda_msi {
> >>
> >>  struct plda_pcie_rp {
> >>  	struct device *dev;
> >> +	struct pci_host_bridge *bridge;
> >>  	struct irq_domain *intx_domain;
> >>  	struct irq_domain *event_domain;
> >>  	raw_spinlock_t lock;
> >>  	struct plda_msi msi;
> >>  	const struct plda_event_ops *event_ops;
> >> +	const struct plda_pcie_host_ops *host_ops;
> >> +	struct phy *phy;
> >>  	void __iomem *bridge_addr;
> >> +	void __iomem *config_base;
> >> +	int irq;
> >> +	int msi_irq;
> >> +	int intx_irq;
> >>  	int num_events;
> >>  };
> >>
> >> @@ -163,6 +189,7 @@ struct plda_event {
> >>  	int msi_event;
> >>  };
> >>
> >> +void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn, int where);
> >>  int plda_init_interrupts(struct platform_device *pdev,
> >>  			 struct plda_pcie_rp *port,
> >>  			 const struct plda_event *event);
> >> @@ -171,4 +198,66 @@ void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
> >>  			    size_t size);
> >>  int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> >>  			   struct plda_pcie_rp *port);
> >> -#endif
> >> +int plda_pcie_host_init(struct plda_pcie_rp *pcie, struct pci_ops *ops);
> >> +void plda_pcie_host_deinit(struct plda_pcie_rp *pcie);
> >> +
> >> +static inline void plda_set_default_msi(struct plda_msi *msi)
> >> +{
> >> +	msi->vector_phy = IMSI_ADDR;
> >> +	msi->num_vectors = PLDA_MAX_NUM_MSI_IRQS;
> >> +}
> >> +
> >> +static inline void plda_pcie_enable_root_port(struct plda_pcie_rp *plda)
> >> +{
> >> +	u32 value;
> >> +
> >> +	value = readl_relaxed(plda->bridge_addr + GEN_SETTINGS);
> >> +	value |= RP_ENABLE;
> >> +	writel_relaxed(value, plda->bridge_addr + GEN_SETTINGS);
> >> +}
> >> +
> >> +static inline void plda_pcie_set_standard_class(struct plda_pcie_rp *plda)
> >> +{
> >> +	u32 value;
> >> +
> >> +	value = readl_relaxed(plda->bridge_addr + PCIE_PCI_IDS_DW1);
> >> +	value &= 0xff;
> >> +	value |= (PCI_CLASS_BRIDGE_PCI << IDS_CLASS_CODE_SHIFT);
> >
> > This looks suspicious. You're clearing the lower 8 bits, but setting
> > bits 16 and up. Also the parentheses are not strictly necessary.
> >
> I will add comments to this.
> >> +	writel_relaxed(value, plda->bridge_addr + PCIE_PCI_IDS_DW1);
> >> +}
> >> +
> >> +static inline void plda_pcie_set_pref_win_64bit(struct plda_pcie_rp *plda)
> >> +{
> >> +	u32 value;
> >> +
> >> +	value = readl_relaxed(plda->bridge_addr + PCIE_WINROM);
> >> +	value |= PREF_MEM_WIN_64_SUPPORT;
> >> +	writel_relaxed(value, plda->bridge_addr + PCIE_WINROM);
> >> +}
> >> +
> >> +static inline void plda_pcie_disable_ltr(struct plda_pcie_rp *plda)
> >> +{
> >> +	u32 value;
> >> +
> >> +	value = readl_relaxed(plda->bridge_addr + PMSG_SUPPORT_RX);
> >> +	value &= ~PMSG_LTR_SUPPORT;
> >> +	writel_relaxed(value, plda->bridge_addr + PMSG_SUPPORT_RX);
> >> +}
> >> +
> >> +static inline void plda_pcie_disable_func(struct plda_pcie_rp *plda)
> >> +{
> >> +	u32 value;
> >> +
> >> +	value = readl_relaxed(plda->bridge_addr + PCI_MISC);
> >> +	value |= PHY_FUNCTION_DIS;
> >> +	writel_relaxed(value, plda->bridge_addr + PCI_MISC);
> >> +}
> >> +
> >> +static inline void plda_pcie_write_rc_bar(struct plda_pcie_rp *plda, u64 val)
> >> +{
> >> +	void __iomem *addr = plda->bridge_addr + CONFIG_SPACE_ADDR;
> >> +
> >> +	writel_relaxed(val & 0xffffffff, addr + PCI_BASE_ADDRESS_0);
> >> +	writel_relaxed(val >> 32, addr + PCI_BASE_ADDRESS_1);
> >
> > Consider using lower_32_bits(val) and upper_32_bits(val) here.
> >
> >> +}
> >> +#endif /* _PCIE_PLDA_H */
> >> diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
> >> new file mode 100644
> >> index 000000000000..42099fef0d7d
> >> --- /dev/null
> >> +++ b/drivers/pci/controller/plda/pcie-starfive.c
> >> @@ -0,0 +1,461 @@
> >> +// SPDX-License-Identifier: GPL-2.0+
> >> +/*
> >> + * PCIe host controller driver for StarFive JH7110 Soc.
> >> + *
> >> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
> >> + */
> >> +
> >> +#include <linux/bitfield.h>
> >> +#include <linux/clk.h>
> >> +#include <linux/delay.h>
> >> +#include <linux/gpio/consumer.h>
> >> +#include <linux/interrupt.h>
> >> +#include <linux/kernel.h>
> >> +#include <linux/mfd/syscon.h>
> >> +#include <linux/module.h>
> >> +#include <linux/of_address.h>
> >> +#include <linux/of_irq.h>
> >> +#include <linux/of_pci.h>
> >> +#include <linux/pci.h>
> >> +#include <linux/platform_device.h>
> >> +#include <linux/pm_runtime.h>
> >> +#include <linux/regmap.h>
> >> +#include <linux/reset.h>
> >> +#include "../../pci.h"
> >> +
> >> +#include "pcie-plda.h"
> >> +
> >> +#define PCIE_FUNC_NUM			4
> >> +
> >> +/* system control */
> >> +#define STG_SYSCON_PCIE0_BASE			0x48
> >> +#define STG_SYSCON_PCIE1_BASE			0x1f8
> >> +
> >> +#define STG_SYSCON_ARFUNC_OFFSET		0x78
> >> +#define STG_SYSCON_AXI4_SLVL_ARFUNC_MASK	 GENMASK(22, 8)
> >> +#define STG_SYSCON_AXI4_SLVL_PHY_ARFUNC(x)	 FIELD_PREP(GENMASK(20, 17), x)
> >> +#define STG_SYSCON_AWFUNC_OFFSET		0x7c
> >> +#define STG_SYSCON_AXI4_SLVL_AWFUNC_MASK	 GENMASK(14, 0)
> >> +#define STG_SYSCON_AXI4_SLVL_PHY_AWFUNC(x)	 FIELD_PREP(GENMASK(12, 9), x)
> >> +#define STG_SYSCON_CLKREQ			 BIT(22)
> >> +#define STG_SYSCON_CKREF_SRC_MASK		 GENMASK(19, 18)
> >> +#define STG_SYSCON_RP_NEP_OFFSET		0xe8
> >> +#define STG_SYSCON_K_RP_NEP			 BIT(8)
> >> +#define STG_SYSCON_LNKSTA_OFFSET		0x170
> >> +#define DATA_LINK_ACTIVE			 BIT(5)
> >> +
> >> +/* Parameters for the waiting for link up routine */
> >> +#define LINK_WAIT_MAX_RETRIES	10
> >> +#define LINK_WAIT_USLEEP_MIN	90000
> >> +#define LINK_WAIT_USLEEP_MAX	100000
> >> +
> >> +struct starfive_jh7110_pcie {
> >> +	struct plda_pcie_rp plda;
> >> +	struct reset_control *resets;
> >> +	struct clk_bulk_data *clks;
> >> +	struct regmap *reg_syscon;
> >> +	struct gpio_desc *power_gpio;
> >> +	struct gpio_desc *reset_gpio;
> >> +
> >> +	u32 stg_arfun;
> >> +	u32 stg_awfun;
> >> +	u32 stg_rp_nep;
> >> +	u32 stg_lnksta;
> >> +
> >> +	int num_clks;
> >> +};
> >> +
> >> +/*
> >> + * The BAR0/1 of bridge should be hidden during enumeration to
> >> + * avoid the sizing and resource allocation by PCIe core.
> >> + */
> >> +static bool starfive_pcie_hide_rc_bar(struct pci_bus *bus, unsigned int  devfn,
> >> +				      int offset)
> >> +{
> >> +	if (pci_is_root_bus(bus) && !devfn &&
> >> +	    (offset == PCI_BASE_ADDRESS_0 || offset == PCI_BASE_ADDRESS_1))
> >> +		return true;
> >> +
> >> +	return false;
> >> +}
> >> +
> >> +static int starfive_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
> >> +				      int where, int size, u32 value)
> >> +{
> >> +	if (starfive_pcie_hide_rc_bar(bus, devfn, where))
> >> +		return PCIBIOS_BAD_REGISTER_NUMBER;
> >> +
> >> +	return pci_generic_config_write(bus, devfn, where, size, value);
> >> +}
> >> +
> >> +static int starfive_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
> >> +				     int where, int size, u32 *value)
> >> +{
> >> +	if (starfive_pcie_hide_rc_bar(bus, devfn, where))
> >> +		return PCIBIOS_BAD_REGISTER_NUMBER;
> >> +
> >> +	return pci_generic_config_read(bus, devfn, where, size, value);
> >> +}
> >> +
> >> +static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie, struct device *dev)
> >> +{
> >> +	int domain_nr, stg_pcie_base;
> >> +
> >> +	pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
> >> +	if (pcie->num_clks < 0)
> >> +		return dev_err_probe(dev, -ENODEV,
> >> +			"failed to get pcie clocks\n");
> >> +
> >> +	pcie->resets = devm_reset_control_array_get_exclusive(dev);
> >> +	if (IS_ERR(pcie->resets))
> >> +		return dev_err_probe(dev, PTR_ERR(pcie->resets),
> >> +			"failed to get pcie resets");
> >> +
> >> +	pcie->reg_syscon =
> >> +		syscon_regmap_lookup_by_phandle(dev->of_node,
> >> +						"starfive,stg-syscon");
> >> +
> >> +	if (IS_ERR(pcie->reg_syscon))
> >> +		return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
> >> +			"failed to parse starfive,stg-syscon\n");
> >> +
> >> +	domain_nr = of_get_pci_domain_nr(dev->of_node);
> >> +
> >> +	if (domain_nr < 0 || domain_nr > 1)
> >> +		return dev_err_probe(dev, -ENODEV,
> >> +			"failed to get valid pcie id\n");
> >> +
> >> +	if (domain_nr == 0)
> >> +		stg_pcie_base = STG_SYSCON_PCIE0_BASE;
> >> +	else
> >> +		stg_pcie_base = STG_SYSCON_PCIE1_BASE;
> >
> > It seems you only need the domain_nr for the determining this offset into the
> > stg_syscon. Since this is already specific to the JH7110 SoC, wouldn't it be
> > safer to match on the 0x2b000000/0x2c000000 or 0x940000000/0x9c0000000
> > address of the peripheral instead?
> >
> Maybe this codes not just bind to JH7110 SoC.

Right, but in that case the STG_SYSCON_PCIE{0,1}_BASE offsets will also be
different, so you'd need to get them from device tree match data anyway, and
then you might as well have an { address, offset } table.

> >> +
> >> +	pcie->stg_arfun = stg_pcie_base + STG_SYSCON_ARFUNC_OFFSET;
> >> +	pcie->stg_awfun = stg_pcie_base + STG_SYSCON_AWFUNC_OFFSET;
> >> +	pcie->stg_rp_nep = stg_pcie_base + STG_SYSCON_RP_NEP_OFFSET;
> >> +	pcie->stg_lnksta = stg_pcie_base + STG_SYSCON_LNKSTA_OFFSET;
> >
> > These offsets are all the same for both pcie0 and pcie1 so why do you need a
> > variable for each? Eg. why not just
> >
> > if (domain_nr == 0)
> > 	pcie->stg_base = STG_SYSCON_PCIE0_BASE;
> > else
> > 	pcie->stg_base = STG_SYSCON_PCIE1_BASE;
> >
> > ..and then add add those static offsets where needed?
> >
> OK. I will try to modify this.
> >> +
> >> +	pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
> >> +	if (IS_ERR(pcie->reset_gpio)) {
> >> +		dev_warn(dev, "failed to get perst-gpio\n");
> >
> > Why is this a warn when you actually error out? I think you mean
> >
> > return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio, "failed to get
> > reset GPIO\n");
> >
> >> +		return -EINVAL;
> >> +	}
> >> +
> >> +	pcie->power_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
> >> +	if (IS_ERR(pcie->power_gpio)) {
> >> +		dev_warn(dev, "failed to get power-gpio\n");
> >> +		return -EINVAL;
> >
> > return dev_err_probe(dev, PTR_ERR(pcie->power_gpio), "failed to get
> > power GPIO\n");
> >
> >> +	}
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static struct pci_ops starfive_pcie_ops = {
> >> +	.map_bus	= plda_pcie_map_bus,
> >> +	.read           = starfive_pcie_config_read,
> >> +	.write          = starfive_pcie_config_write,
> >> +};
> >> +
> >> +static int starfive_pcie_clk_rst_init(struct starfive_jh7110_pcie *pcie)
> >> +{
> >> +	int ret;
> >> +	struct device *dev = pcie->plda.dev;
> >
> > Again, please order initialized variables first.
> >
> >> +
> >> +	ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
> >> +	if (ret) {
> >> +		dev_err(dev, "failed to enable clocks\n");
> >> +		return ret;
> >
> > return dev_err_probe(dev, ret, "failed to enable clocks\n");
> >
> >> +	}
> >> +
> >> +	ret = reset_control_deassert(pcie->resets);
> >> +	if (ret) {
> >> +		clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> >> +		dev_err(dev, "failed to resets\n");
> >
> > I think you mean
> > return dev_err_probe(dev, ret, "failed to deassert resets\n");
> >
> >> +	}
> >> +
> >> +	return ret;
> >> +}
> >> +
> >> +static void starfive_pcie_clk_rst_deinit(struct starfive_jh7110_pcie *pcie)
> >> +{
> >> +	reset_control_assert(pcie->resets);
> >> +	clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> >> +}
> >> +
> >> +static bool starfive_pcie_link_up(struct plda_pcie_rp *plda)
> >> +{
> >> +	struct starfive_jh7110_pcie *pcie =
> >> +		container_of(plda, struct starfive_jh7110_pcie, plda);
> >> +	struct device *dev = pcie->plda.dev;
> >
> > This is only used once below, so just use pcie->plda.dev directly there.
> >
> OK, thanks
> >> +	int ret;
> >> +	u32 stg_reg_val;
> >> +
> >> +	ret = regmap_read(pcie->reg_syscon, pcie->stg_lnksta, &stg_reg_val);
> >> +	if (ret) {
> >> +		dev_err(dev, "failed to read link status\n");
> >> +		return false;
> >> +	}
> >> +
> >> +	if (stg_reg_val & DATA_LINK_ACTIVE)
> >> +		return true;
> >> +
> >> +	return false;
> >
> > These last 4 lines is just "return stg_reg_val & DATA_LINK_ACTIVE;" right?
> >
> OK
> >> +}
> >> +
> >> +static int starfive_pcie_host_wait_for_link(struct starfive_jh7110_pcie *pcie)
> >> +{
> >> +	struct device *dev = pcie->plda.dev;
> >
> > Only used once, just inline.
> >
> >> +	int retries;
> >> +
> >> +	/* Check if the link is up or not */
> >> +	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
> >> +		if (starfive_pcie_link_up(&pcie->plda)) {
> >> +			dev_info(dev, "port link up\n");
> >> +			return 0;
> >> +		}
> >> +		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
> >> +	}
> >> +
> >> +	return -ETIMEDOUT;
> >> +}
> >> +
> >> +static int starfive_pcie_enable_phy(struct device *dev, struct plda_pcie_rp *pcie)
> >> +{
> >> +	int ret;
> >> +
> >> +	if (!pcie->phy)
> >> +		return 0;
> >> +
> >> +	ret = phy_init(pcie->phy);
> >> +	if (ret)
> >> +		return dev_err_probe(dev, ret,
> >> +			"failed to initialize pcie phy\n");
> >> +
> >> +	ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
> >> +	if (ret) {
> >> +		dev_err(dev, "failed to set pcie mode\n");
> >> +		goto err_phy_on;
> >> +	}
> >> +
> >> +	ret = phy_power_on(pcie->phy);
> >> +	if (ret) {
> >> +		dev_err(dev, "failed to power on pcie phy\n");
> >> +		goto err_phy_on;
> >> +	}
> >> +
> >> +	return 0;
> >> +
> >> +err_phy_on:
> >> +	phy_exit(pcie->phy);
> >> +	return ret;
> >> +}
> >> +
> >> +static void starfive_pcie_disable_phy(struct plda_pcie_rp *pcie)
> >> +{
> >> +	phy_power_off(pcie->phy);
> >> +	phy_exit(pcie->phy);
> >> +}
> >> +
> >> +static void starfive_pcie_host_deinit(struct plda_pcie_rp *plda)
> >> +{
> >> +	struct starfive_jh7110_pcie *pcie =
> >> +		container_of(plda, struct starfive_jh7110_pcie, plda);
> >> +
> >> +	starfive_pcie_clk_rst_deinit(pcie);
> >> +	if (pcie->power_gpio)
> >> +		gpiod_set_value_cansleep(pcie->power_gpio, 0);
> >> +	starfive_pcie_disable_phy(plda);
> >> +}
> >> +
> >> +static int starfive_pcie_host_init(struct plda_pcie_rp *plda)
> >> +{
> >> +	int i;
> >> +	struct starfive_jh7110_pcie *pcie =
> >> +		container_of(plda, struct starfive_jh7110_pcie, plda);
> >> +	struct device *dev = plda->dev;
> >> +	int ret;
> >
> > Weird ordering again.
> >
> >> +
> >> +	ret = starfive_pcie_enable_phy(dev, plda);
> >> +	if (ret)
> >> +		return ret;
> >> +
> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_rp_nep,
> >> +			   STG_SYSCON_K_RP_NEP, STG_SYSCON_K_RP_NEP);
> >> +
> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
> >> +			   STG_SYSCON_CKREF_SRC_MASK,
> >> +			   FIELD_PREP(STG_SYSCON_CKREF_SRC_MASK, 2));
> >> +
> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
> >> +			   STG_SYSCON_CLKREQ, STG_SYSCON_CLKREQ);
> >> +
> >> +	ret = starfive_pcie_clk_rst_init(pcie);
> >> +	if (ret)
> >> +		return ret;
> >> +
> >> +	if (pcie->power_gpio)
> >> +		gpiod_set_value_cansleep(pcie->power_gpio, 1);
> >> +
> >> +	if (pcie->reset_gpio)
> >> +		gpiod_set_value_cansleep(pcie->reset_gpio, 1);
> >> +
> >> +	/* Disable physical functions except #0 */
> >> +	for (i = 1; i < PCIE_FUNC_NUM; i++) {
> >> +		regmap_update_bits(pcie->reg_syscon,
> >> +				   pcie->stg_arfun,
> >> +				   STG_SYSCON_AXI4_SLVL_ARFUNC_MASK,
> >> +				   STG_SYSCON_AXI4_SLVL_PHY_ARFUNC(i));
> >> +
> >> +		regmap_update_bits(pcie->reg_syscon,
> >> +				   pcie->stg_awfun,
> >> +				   STG_SYSCON_AXI4_SLVL_AWFUNC_MASK,
> >> +				   STG_SYSCON_AXI4_SLVL_PHY_AWFUNC(i));
> >> +
> >> +		plda_pcie_disable_func(plda);
> >> +	}
> >> +
> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_arfun,
> >> +			   STG_SYSCON_AXI4_SLVL_ARFUNC_MASK, 0);
> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
> >> +			   STG_SYSCON_AXI4_SLVL_AWFUNC_MASK, 0);
> >> +
> >> +	plda_pcie_enable_root_port(plda);
> >> +	plda_pcie_write_rc_bar(plda, 0);
> >> +
> >> +	/* PCIe PCI Standard Configuration Identification Settings. */
> >> +	plda_pcie_set_standard_class(plda);
> >> +
> >> +	/*
> >> +	 * The LTR message forwarding of PCIe Message Reception was set by core
> >> +	 * as default, but the forward id & addr are also need to be reset.
> >> +	 * If we do not disable LTR message forwarding here, or set a legal
> >> +	 * forwarding address, the kernel will get stuck after this driver probe.
> >> +	 * To workaround, disable the LTR message forwarding support on
> >> +	 * PCIe Message Reception.
> >> +	 */
> >> +	plda_pcie_disable_ltr(plda);
> >> +
> >> +	/* Prefetchable memory window 64-bit addressing support */
> >> +	plda_pcie_set_pref_win_64bit(plda);
> >> +
> >> +	/* Ensure that PERST has been asserted for at least 100 ms,
> >> +	 * the sleep value is T_PVPERL from PCIe CEM spec r2.0 (Table 2-4)
> >> +	 */
> >> +	msleep(100);
> >> +	if (pcie->reset_gpio)
> >> +		gpiod_set_value_cansleep(pcie->reset_gpio, 0);
> >> +
> >> +	/* As the requirement in PCIe base spec r6.0, system (<=5GT/s) must
> >> +	 * wait a minimum of 100 ms following exit from a conventional reset
> >> +	 * before sending a configuration request to the device.
> >> +	 */
> >> +	msleep(100);
> >> +
> >> +	if (starfive_pcie_host_wait_for_link(pcie))
> >> +		dev_info(dev, "port link down\n");
> >> +
> >> +	return ret;
> >> +}
> >> +
> >> +static const struct plda_pcie_host_ops sf_host_ops = {
> >> +	.host_init = starfive_pcie_host_init,
> >> +	.host_deinit = starfive_pcie_host_deinit,
> >> +};
> >> +
> >> +static int starfive_pcie_probe(struct platform_device *pdev)
> >> +{
> >> +	struct device *dev = &pdev->dev;
> >> +	struct starfive_jh7110_pcie *pcie;
> >> +	struct plda_pcie_rp *plda;
> >> +	int ret;
> >> +
> >> +	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> >> +	if (!pcie)
> >> +		return -ENOMEM;
> >> +
> >> +	plda = &pcie->plda;
> >> +	plda->dev = dev;
> >> +
> >> +	ret = starfive_pcie_parse_dt(pcie, dev);
> >> +	if (ret)
> >> +		return ret;
> >> +
> >> +	plda->host_ops = &sf_host_ops;
> >> +	plda->num_events = NUM_PLDA_EVENTS;
> >> +	ret = plda_pcie_host_init(&pcie->plda, &starfive_pcie_ops);
> >> +	if (ret)
> >> +		return ret;
> >> +
> >> +	pm_runtime_enable(&pdev->dev);
> >> +	pm_runtime_get_sync(&pdev->dev);
> >> +	platform_set_drvdata(pdev, pcie);
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static void starfive_pcie_remove(struct platform_device *pdev)
> >> +{
> >> +	struct starfive_jh7110_pcie *pcie = platform_get_drvdata(pdev);
> >> +
> >> +	plda_pcie_host_deinit(&pcie->plda);
> >> +	platform_set_drvdata(pdev, NULL);
> >> +}
> >> +
> >> +static int starfive_pcie_suspend_noirq(struct device *dev)
> >> +{
> >> +	struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
> >> +
> >> +	if (!pcie)
> >> +		return 0;
> >> +
> >> +	clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> >> +	starfive_pcie_disable_phy(&pcie->plda);
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static int starfive_pcie_resume_noirq(struct device *dev)
> >> +{
> >> +	struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
> >> +	int ret;
> >> +
> >> +	ret = starfive_pcie_enable_phy(dev, &pcie->plda);
> >> +	if (ret)
> >> +		return ret;
> >> +
> >> +	ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
> >> +	if (ret) {
> >> +		dev_err(dev, "failed to enable clocks\n");
> >> +		starfive_pcie_disable_phy(&pcie->plda);
> >> +		return ret;
> >> +	}
> >> +
> >> +	return ret;
> >> +}
> >> +
> >> +static const struct dev_pm_ops starfive_pcie_pm_ops = {
> >> +	NOIRQ_SYSTEM_SLEEP_PM_OPS(starfive_pcie_suspend_noirq,
> >> +				  starfive_pcie_resume_noirq)
> >> +};
> >> +
> >> +static const struct of_device_id starfive_pcie_of_match[] = {
> >> +	{ .compatible = "starfive,jh7110-pcie"},
> >
> > Missing space before }
> >
> >> +	{ /* sentinel */ }
> >> +};
> >> +MODULE_DEVICE_TABLE(of, starfive_pcie_of_match);
> >> +
> >> +static struct platform_driver starfive_pcie_driver = {
> >> +	.driver = {
> >> +		.name = "pcie-starfive",
> >> +		.of_match_table = of_match_ptr(starfive_pcie_of_match),
> >> +#ifdef CONFIG_PM_SLEEP
> >> +		.pm = &starfive_pcie_pm_ops,
> >> +#endif
> >
> > This can be just .pm = pm_sleep_ptr(&starfive_pcie_pm_ops),
> >
> OK
> >> +	},
> >> +	.probe = starfive_pcie_probe,
> >> +	.remove_new = starfive_pcie_remove,
> >> +};
> >> +module_platform_driver(starfive_pcie_driver);
> >> +
> >> +MODULE_DESCRIPTION("StarFive JH7110 PCIe host driver");
> >> +MODULE_LICENSE("GPL v2");
> >> --
> >> 2.17.1
  
Minda Chen Sept. 21, 2023, 10:50 a.m. UTC | #5
On 2023/9/19 19:34, Emil Renner Berthing wrote:
> Minda Chen wrote:
>>
>>
>> On 2023/9/18 6:13, Emil Renner Berthing wrote:
>> > Minda Chen wrote:
>> >> Add StarFive JH7110 SoC PCIe controller platform
>> >> driver codes, and add host init/deinit to pcie-plda-host.c
>> >>
>> >> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
>> >> Co-developed-by: Kevin Xie <kevin.xie@starfivetech.com>
>> >> Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
>> >> ---
>> >>  MAINTAINERS                                  |   7 +
>> >>  drivers/pci/controller/plda/Kconfig          |  12 +
>> >>  drivers/pci/controller/plda/Makefile         |   1 +
>> >>  drivers/pci/controller/plda/pcie-plda-host.c | 121 ++++-
>> >>  drivers/pci/controller/plda/pcie-plda.h      |  91 +++-
>> >>  drivers/pci/controller/plda/pcie-starfive.c  | 461 +++++++++++++++++++
>> >>  6 files changed, 688 insertions(+), 5 deletions(-)
>> >>  create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
>> >>
>> >> diff --git a/MAINTAINERS b/MAINTAINERS
>> >> index ebdb65e195ee..4632cd411a3d 100644
>> >> --- a/MAINTAINERS
>> >> +++ b/MAINTAINERS
>> >> @@ -16679,6 +16679,13 @@ S:	Maintained
>> >>  F:	Documentation/devicetree/bindings/pci/socionext,uniphier-pcie*
>> >>  F:	drivers/pci/controller/dwc/pcie-uniphier*
>> >>
>> >> +PCIE DRIVER FOR STARFIVE JH71x0
>> >> +M:	Kevin Xie <kevin.xie@starfivetech.com>
>> >> +L:	linux-pci@vger.kernel.org
>> >> +S:	Maintained
>> >> +F:	Documentation/devicetree/bindings/pci/starfive*
>> >> +F:	drivers/pci/controller/plda/pcie-starfive.c
>> >> +
>> >>  PCIE DRIVER FOR ST SPEAR13XX
>> >>  M:	Pratyush Anand <pratyush.anand@gmail.com>
>> >>  L:	linux-pci@vger.kernel.org
>> >> diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
>> >> index e54a82ee94f5..8de661730aa5 100644
>> >> --- a/drivers/pci/controller/plda/Kconfig
>> >> +++ b/drivers/pci/controller/plda/Kconfig
>> >> @@ -15,4 +15,16 @@ config PCIE_MICROCHIP_HOST
>> >>  	  Say Y here if you want kernel to support the Microchip AXI PCIe
>> >>  	  Host Bridge driver.
>> >>
>> >> +config PCIE_STARFIVE_HOST
>> >> +	tristate "StarFive PCIe host controller"
>> >> +	depends on OF && PCI_MSI
>> >> +	select PCIE_PLDA_HOST
>> >> +	help
>> >> +	  Say Y here if you want to support the StarFive PCIe controller
>> >> +	  in host mode. StarFive PCIe controller uses PLDA PCIe
>> >> +	  core.
>> >> +	  If you choose to build this driver as module it will
>> >> +	  be dynamically linked and module will be called
>> >> +	  pcie-starfive.ko
>> >> +
>> >>  endmenu
>> >> diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
>> >> index 4340ab007f44..0ac6851bed48 100644
>> >> --- a/drivers/pci/controller/plda/Makefile
>> >> +++ b/drivers/pci/controller/plda/Makefile
>> >> @@ -1,3 +1,4 @@
>> >>  # SPDX-License-Identifier: GPL-2.0
>> >>  obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
>> >>  obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
>> >> +obj-$(CONFIG_PCIE_STARFIVE_HOST) += pcie-starfive.o
>> >> diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
>> >> index 26e6cfd2eaba..8b32df477ad8 100644
>> >> --- a/drivers/pci/controller/plda/pcie-plda-host.c
>> >> +++ b/drivers/pci/controller/plda/pcie-plda-host.c
>> >> @@ -20,6 +20,15 @@
>> >>
>> >>  #include "pcie-plda.h"
>> >>
>> >> +void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
>> >> +				int where)
>> >> +{
>> >> +	struct plda_pcie_rp *pcie = bus->sysdata;
>> >> +
>> >> +	return pcie->config_base + PCIE_ECAM_OFFSET(bus->number, devfn, where);
>> >> +}
>> >> +EXPORT_SYMBOL_GPL(plda_pcie_map_bus);
>> >> +
>> >>  static void plda_handle_msi(struct irq_desc *desc)
>> >>  {
>> >>  	struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
>> >> @@ -370,6 +379,12 @@ static const struct plda_event_ops plda_event_ops = {
>> >>  	.get_events = plda_get_events,
>> >>  };
>> >>
>> >> +static const struct plda_event plda_default_event = {
>> >> +	.event_ops		= &plda_event_ops,
>> >> +	.intx_event		= EVENT_PM_MSI_INT_INTX,
>> >> +	.msi_event		= EVENT_PM_MSI_INT_MSI
>> >> +};
>> >> +
>> >>  static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port,
>> >>  				      const struct irq_domain_ops *ops)
>> >>  {
>> >> @@ -416,7 +431,6 @@ int plda_init_interrupts(struct platform_device *pdev,
>> >>  			 const struct plda_event *event)
>> >>  {
>> >>  	struct device *dev = &pdev->dev;
>> >> -	int irq;
>> >>  	int i, intx_irq, msi_irq, event_irq;
>> >>  	int ret;
>> >>  	const struct irq_domain_ops *irq_dom_ops;
>> >> @@ -434,8 +448,8 @@ int plda_init_interrupts(struct platform_device *pdev,
>> >>  		return ret;
>> >>  	}
>> >>
>> >> -	irq = platform_get_irq(pdev, 0);
>> >> -	if (irq < 0)
>> >> +	port->irq = platform_get_irq(pdev, 0);
>> >> +	if (port->irq < 0)
>> >>  		return -ENODEV;
>> >
>> > Here you're dropping the local variable irq and just use port->irq directly..
>> >
>> >>
>> >>  	port->event_ops = event->event_ops;
>> >> @@ -465,6 +479,7 @@ int plda_init_interrupts(struct platform_device *pdev,
>> >>  		dev_err(dev, "failed to map INTx interrupt\n");
>> >>  		return -ENXIO;
>> >>  	}
>> >> +	port->intx_irq = intx_irq;
>> >
>> > ..but for intx_irq..
>> >
>> >>
>> >>  	/* Plug the INTx chained handler */
>> >>  	irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
>> >> @@ -473,12 +488,13 @@ int plda_init_interrupts(struct platform_device *pdev,
>> >>  				     event->msi_event);
>> >>  	if (!msi_irq)
>> >>  		return -ENXIO;
>> >> +	port->msi_irq = msi_irq;
>> >
>> > ..and msi_irq you're keeping the local variable. I think you should drop
>> > the local variables here too, or at least do the same for all of them.
>> >
>> OK, remove all the local variables is better.
>> >>
>> >>  	/* Plug the MSI chained handler */
>> >>  	irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
>> >>
>> >>  	/* Plug the main event chained handler */
>> >> -	irq_set_chained_handler_and_data(irq, plda_handle_event, port);
>> >> +	irq_set_chained_handler_and_data(port->irq, plda_handle_event, port);
>> >>
>> >>  	return 0;
>> >>  }
>> >> @@ -544,3 +560,100 @@ int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
>> >>  	return 0;
>> >>  }
>> >>  EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
>> >> +
>> >> +static void plda_pcie_irq_domain_deinit(struct plda_pcie_rp *pcie)
>> >> +{
>> >> +	irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
>> >> +	irq_set_chained_handler_and_data(pcie->msi_irq, NULL, NULL);
>> >> +	irq_set_chained_handler_and_data(pcie->intx_irq, NULL, NULL);
>> >> +
>> >> +	irq_domain_remove(pcie->msi.msi_domain);
>> >> +	irq_domain_remove(pcie->msi.dev_domain);
>> >> +
>> >> +	irq_domain_remove(pcie->intx_domain);
>> >> +	irq_domain_remove(pcie->event_domain);
>> >> +}
>> >> +
>> >> +int plda_pcie_host_init(struct plda_pcie_rp *port, struct pci_ops *ops)
>> >> +{
>> >> +	struct resource *cfg_res;
>> >> +	struct device *dev = port->dev;
>> >> +	int ret;
>> >> +	struct pci_host_bridge *bridge;
>> >> +	struct platform_device *pdev = to_platform_device(dev);
>> >
>> > This looks weird. Please order initialized variables first and maybe even do
>> > reverse christmas tree order. Eg. longeist lines first.
>> >
>> OK, The same with other places.
>> >> +
>> >> +	port->bridge_addr =
>> >> +		devm_platform_ioremap_resource_byname(pdev, "apb");
>> >> +
>> >> +	if (IS_ERR(port->bridge_addr))
>> >> +		return dev_err_probe(dev, PTR_ERR(port->bridge_addr),
>> >> +				     "failed to map reg memory\n");
>> >> +
>> >> +	cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
>> >> +	if (!cfg_res)
>> >> +		return dev_err_probe(dev, -ENODEV,
>> >> +				     "failed to get config memory\n");
>> >> +
>> >> +	port->config_base = devm_ioremap_resource(dev, cfg_res);
>> >> +	if (IS_ERR(port->config_base))
>> >> +		return dev_err_probe(dev, PTR_ERR(port->config_base),
>> >> +				     "failed to map config memory\n");
>> >> +
>> >> +	port->phy = devm_phy_optional_get(dev, NULL);
>> >> +	if (IS_ERR(port->phy))
>> >> +		return dev_err_probe(dev, PTR_ERR(port->phy),
>> >> +				     "failed to get pcie phy\n");
>> >> +
>> >> +	bridge = devm_pci_alloc_host_bridge(dev, 0);
>> >> +	if (!bridge)
>> >> +		return dev_err_probe(dev, -ENOMEM,
>> >> +				     "failed to alloc bridge\n");
>> >> +
>> >> +	if (port->host_ops && port->host_ops->host_init) {
>> >> +		ret = port->host_ops->host_init(port);
>> >> +		if (ret)
>> >> +			return ret;
>> >> +	}
>> >> +
>> >> +	port->bridge = bridge;
>> >> +	plda_pcie_setup_window(port->bridge_addr, 0, cfg_res->start, 0,
>> >> +			       resource_size(cfg_res));
>> >> +	plda_pcie_setup_iomems(bridge, port);
>> >> +	plda_set_default_msi(&port->msi);
>> >> +	ret = plda_init_interrupts(pdev, port, &plda_default_event);
>> >> +	if (ret)
>> >> +		goto err_host;
>> >> +
>> >> +	/* Set default bus ops */
>> >> +	bridge->ops = ops;
>> >> +	bridge->sysdata = port;
>> >> +
>> >> +	ret = pci_host_probe(bridge);
>> >> +	if (ret < 0) {
>> >> +		dev_err(dev, "failed to pci host probe: %d\n", ret);
>> >
>> > I think you mean:
>> >
>> > dev_err_probe(dev, ret, "failed to probe pci host\n");
>> >
>> I check with dev_err_probe, It is better than dev_err, I will replace this.
>> >> +		goto err_probe;
>> >> +	}
>> >> +
>> >> +	return ret;
>> >> +
>> >> +err_probe:
>> >> +	plda_pcie_irq_domain_deinit(port);
>> >> +err_host:
>> >> +	if (port->host_ops && port->host_ops->host_deinit)
>> >> +		port->host_ops->host_deinit(port);
>> >> +
>> >> +	return ret;
>> >> +}
>> >> +EXPORT_SYMBOL_GPL(plda_pcie_host_init);
>> >> +
>> >> +void plda_pcie_host_deinit(struct plda_pcie_rp *port)
>> >> +{
>> >> +	pci_stop_root_bus(port->bridge->bus);
>> >> +	pci_remove_root_bus(port->bridge->bus);
>> >> +
>> >> +	plda_pcie_irq_domain_deinit(port);
>> >> +
>> >> +	if (port->host_ops && port->host_ops->host_deinit)
>> >> +		port->host_ops->host_deinit(port);
>> >> +}
>> >> +EXPORT_SYMBOL_GPL(plda_pcie_host_deinit);
>> >> diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
>> >> index b7420598a326..e571047d7944 100644
>> >> --- a/drivers/pci/controller/plda/pcie-plda.h
>> >> +++ b/drivers/pci/controller/plda/pcie-plda.h
>> >> @@ -6,14 +6,24 @@
>> >>  #ifndef _PCIE_PLDA_H
>> >>  #define _PCIE_PLDA_H
>> >>
>> >> +#include <linux/phy/phy.h>
>> >> +
>> >>  /* Number of MSI IRQs */
>> >>  #define PLDA_MAX_NUM_MSI_IRQS			32
>> >>
>> >>  /* PCIe Bridge Phy Regs */
>> >> +#define GEN_SETTINGS				0x80
>> >> +#define  RP_ENABLE				1
>> >> +#define PCIE_PCI_IDS_DW1			0x9c
>> >> +#define  IDS_CLASS_CODE_SHIFT			16
>> >>  #define PCIE_PCI_IRQ_DW0			0xa8
>> >>  #define  MSIX_CAP_MASK				BIT(31)
>> >>  #define  NUM_MSI_MSGS_MASK			GENMASK(6, 4)
>> >>  #define  NUM_MSI_MSGS_SHIFT			4
>> >> +#define PCI_MISC				0xb4
>> >> +#define  PHY_FUNCTION_DIS			BIT(15)
>> >> +#define PCIE_WINROM				0xfc
>> >> +#define  PREF_MEM_WIN_64_SUPPORT		BIT(3)
>> >>
>> >>  #define IMASK_LOCAL				0x180
>> >>  #define  DMA_END_ENGINE_0_MASK			0x00000000u
>> >> @@ -64,6 +74,8 @@
>> >>  #define ISTATUS_HOST				0x18c
>> >>  #define IMSI_ADDR				0x190
>> >>  #define ISTATUS_MSI				0x194
>> >> +#define PMSG_SUPPORT_RX				0x3f0
>> >> +#define  PMSG_LTR_SUPPORT			BIT(2)
>> >>
>> >>  /* PCIe Master table init defines */
>> >>  #define ATR0_PCIE_WIN0_SRCADDR_PARAM		0x600u
>> >> @@ -85,6 +97,8 @@
>> >>  #define  PCIE_TX_RX_INTERFACE			0x00000000u
>> >>  #define  PCIE_CONFIG_INTERFACE			0x00000001u
>> >>
>> >> +#define CONFIG_SPACE_ADDR			0x1000u
>> >> +
>> >>  #define ATR_ENTRY_SIZE				32
>> >>
>> >>  #define EVENT_A_ATR_EVT_POST_ERR		0
>> >> @@ -134,6 +148,11 @@ struct plda_event_ops {
>> >>  	u32 (*get_events)(struct plda_pcie_rp *pcie);
>> >>  };
>> >>
>> >> +struct plda_pcie_host_ops {
>> >> +	int (*host_init)(struct plda_pcie_rp *pcie);
>> >> +	void (*host_deinit)(struct plda_pcie_rp *pcie);
>> >> +};
>> >> +
>> >>  struct plda_msi {
>> >>  	struct mutex lock;		/* Protect used bitmap */
>> >>  	struct irq_domain *msi_domain;
>> >> @@ -145,12 +164,19 @@ struct plda_msi {
>> >>
>> >>  struct plda_pcie_rp {
>> >>  	struct device *dev;
>> >> +	struct pci_host_bridge *bridge;
>> >>  	struct irq_domain *intx_domain;
>> >>  	struct irq_domain *event_domain;
>> >>  	raw_spinlock_t lock;
>> >>  	struct plda_msi msi;
>> >>  	const struct plda_event_ops *event_ops;
>> >> +	const struct plda_pcie_host_ops *host_ops;
>> >> +	struct phy *phy;
>> >>  	void __iomem *bridge_addr;
>> >> +	void __iomem *config_base;
>> >> +	int irq;
>> >> +	int msi_irq;
>> >> +	int intx_irq;
>> >>  	int num_events;
>> >>  };
>> >>
>> >> @@ -163,6 +189,7 @@ struct plda_event {
>> >>  	int msi_event;
>> >>  };
>> >>
>> >> +void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn, int where);
>> >>  int plda_init_interrupts(struct platform_device *pdev,
>> >>  			 struct plda_pcie_rp *port,
>> >>  			 const struct plda_event *event);
>> >> @@ -171,4 +198,66 @@ void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
>> >>  			    size_t size);
>> >>  int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
>> >>  			   struct plda_pcie_rp *port);
>> >> -#endif
>> >> +int plda_pcie_host_init(struct plda_pcie_rp *pcie, struct pci_ops *ops);
>> >> +void plda_pcie_host_deinit(struct plda_pcie_rp *pcie);
>> >> +
>> >> +static inline void plda_set_default_msi(struct plda_msi *msi)
>> >> +{
>> >> +	msi->vector_phy = IMSI_ADDR;
>> >> +	msi->num_vectors = PLDA_MAX_NUM_MSI_IRQS;
>> >> +}
>> >> +
>> >> +static inline void plda_pcie_enable_root_port(struct plda_pcie_rp *plda)
>> >> +{
>> >> +	u32 value;
>> >> +
>> >> +	value = readl_relaxed(plda->bridge_addr + GEN_SETTINGS);
>> >> +	value |= RP_ENABLE;
>> >> +	writel_relaxed(value, plda->bridge_addr + GEN_SETTINGS);
>> >> +}
>> >> +
>> >> +static inline void plda_pcie_set_standard_class(struct plda_pcie_rp *plda)
>> >> +{
>> >> +	u32 value;
>> >> +
>> >> +	value = readl_relaxed(plda->bridge_addr + PCIE_PCI_IDS_DW1);
>> >> +	value &= 0xff;
>> >> +	value |= (PCI_CLASS_BRIDGE_PCI << IDS_CLASS_CODE_SHIFT);
>> >
>> > This looks suspicious. You're clearing the lower 8 bits, but setting
>> > bits 16 and up. Also the parentheses are not strictly necessary.
>> >
>> I will add comments to this.
>> >> +	writel_relaxed(value, plda->bridge_addr + PCIE_PCI_IDS_DW1);
>> >> +}
>> >> +
>> >> +static inline void plda_pcie_set_pref_win_64bit(struct plda_pcie_rp *plda)
>> >> +{
>> >> +	u32 value;
>> >> +
>> >> +	value = readl_relaxed(plda->bridge_addr + PCIE_WINROM);
>> >> +	value |= PREF_MEM_WIN_64_SUPPORT;
>> >> +	writel_relaxed(value, plda->bridge_addr + PCIE_WINROM);
>> >> +}
>> >> +
>> >> +static inline void plda_pcie_disable_ltr(struct plda_pcie_rp *plda)
>> >> +{
>> >> +	u32 value;
>> >> +
>> >> +	value = readl_relaxed(plda->bridge_addr + PMSG_SUPPORT_RX);
>> >> +	value &= ~PMSG_LTR_SUPPORT;
>> >> +	writel_relaxed(value, plda->bridge_addr + PMSG_SUPPORT_RX);
>> >> +}
>> >> +
>> >> +static inline void plda_pcie_disable_func(struct plda_pcie_rp *plda)
>> >> +{
>> >> +	u32 value;
>> >> +
>> >> +	value = readl_relaxed(plda->bridge_addr + PCI_MISC);
>> >> +	value |= PHY_FUNCTION_DIS;
>> >> +	writel_relaxed(value, plda->bridge_addr + PCI_MISC);
>> >> +}
>> >> +
>> >> +static inline void plda_pcie_write_rc_bar(struct plda_pcie_rp *plda, u64 val)
>> >> +{
>> >> +	void __iomem *addr = plda->bridge_addr + CONFIG_SPACE_ADDR;
>> >> +
>> >> +	writel_relaxed(val & 0xffffffff, addr + PCI_BASE_ADDRESS_0);
>> >> +	writel_relaxed(val >> 32, addr + PCI_BASE_ADDRESS_1);
>> >
>> > Consider using lower_32_bits(val) and upper_32_bits(val) here.
>> >
>> >> +}
>> >> +#endif /* _PCIE_PLDA_H */
>> >> diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
>> >> new file mode 100644
>> >> index 000000000000..42099fef0d7d
>> >> --- /dev/null
>> >> +++ b/drivers/pci/controller/plda/pcie-starfive.c
>> >> @@ -0,0 +1,461 @@
>> >> +// SPDX-License-Identifier: GPL-2.0+
>> >> +/*
>> >> + * PCIe host controller driver for StarFive JH7110 Soc.
>> >> + *
>> >> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
>> >> + */
>> >> +
>> >> +#include <linux/bitfield.h>
>> >> +#include <linux/clk.h>
>> >> +#include <linux/delay.h>
>> >> +#include <linux/gpio/consumer.h>
>> >> +#include <linux/interrupt.h>
>> >> +#include <linux/kernel.h>
>> >> +#include <linux/mfd/syscon.h>
>> >> +#include <linux/module.h>
>> >> +#include <linux/of_address.h>
>> >> +#include <linux/of_irq.h>
>> >> +#include <linux/of_pci.h>
>> >> +#include <linux/pci.h>
>> >> +#include <linux/platform_device.h>
>> >> +#include <linux/pm_runtime.h>
>> >> +#include <linux/regmap.h>
>> >> +#include <linux/reset.h>
>> >> +#include "../../pci.h"
>> >> +
>> >> +#include "pcie-plda.h"
>> >> +
>> >> +#define PCIE_FUNC_NUM			4
>> >> +
>> >> +/* system control */
>> >> +#define STG_SYSCON_PCIE0_BASE			0x48
>> >> +#define STG_SYSCON_PCIE1_BASE			0x1f8
>> >> +
>> >> +#define STG_SYSCON_ARFUNC_OFFSET		0x78
>> >> +#define STG_SYSCON_AXI4_SLVL_ARFUNC_MASK	 GENMASK(22, 8)
>> >> +#define STG_SYSCON_AXI4_SLVL_PHY_ARFUNC(x)	 FIELD_PREP(GENMASK(20, 17), x)
>> >> +#define STG_SYSCON_AWFUNC_OFFSET		0x7c
>> >> +#define STG_SYSCON_AXI4_SLVL_AWFUNC_MASK	 GENMASK(14, 0)
>> >> +#define STG_SYSCON_AXI4_SLVL_PHY_AWFUNC(x)	 FIELD_PREP(GENMASK(12, 9), x)
>> >> +#define STG_SYSCON_CLKREQ			 BIT(22)
>> >> +#define STG_SYSCON_CKREF_SRC_MASK		 GENMASK(19, 18)
>> >> +#define STG_SYSCON_RP_NEP_OFFSET		0xe8
>> >> +#define STG_SYSCON_K_RP_NEP			 BIT(8)
>> >> +#define STG_SYSCON_LNKSTA_OFFSET		0x170
>> >> +#define DATA_LINK_ACTIVE			 BIT(5)
>> >> +
>> >> +/* Parameters for the waiting for link up routine */
>> >> +#define LINK_WAIT_MAX_RETRIES	10
>> >> +#define LINK_WAIT_USLEEP_MIN	90000
>> >> +#define LINK_WAIT_USLEEP_MAX	100000
>> >> +
>> >> +struct starfive_jh7110_pcie {
>> >> +	struct plda_pcie_rp plda;
>> >> +	struct reset_control *resets;
>> >> +	struct clk_bulk_data *clks;
>> >> +	struct regmap *reg_syscon;
>> >> +	struct gpio_desc *power_gpio;
>> >> +	struct gpio_desc *reset_gpio;
>> >> +
>> >> +	u32 stg_arfun;
>> >> +	u32 stg_awfun;
>> >> +	u32 stg_rp_nep;
>> >> +	u32 stg_lnksta;
>> >> +
>> >> +	int num_clks;
>> >> +};
>> >> +
>> >> +/*
>> >> + * The BAR0/1 of bridge should be hidden during enumeration to
>> >> + * avoid the sizing and resource allocation by PCIe core.
>> >> + */
>> >> +static bool starfive_pcie_hide_rc_bar(struct pci_bus *bus, unsigned int  devfn,
>> >> +				      int offset)
>> >> +{
>> >> +	if (pci_is_root_bus(bus) && !devfn &&
>> >> +	    (offset == PCI_BASE_ADDRESS_0 || offset == PCI_BASE_ADDRESS_1))
>> >> +		return true;
>> >> +
>> >> +	return false;
>> >> +}
>> >> +
>> >> +static int starfive_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
>> >> +				      int where, int size, u32 value)
>> >> +{
>> >> +	if (starfive_pcie_hide_rc_bar(bus, devfn, where))
>> >> +		return PCIBIOS_BAD_REGISTER_NUMBER;
>> >> +
>> >> +	return pci_generic_config_write(bus, devfn, where, size, value);
>> >> +}
>> >> +
>> >> +static int starfive_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
>> >> +				     int where, int size, u32 *value)
>> >> +{
>> >> +	if (starfive_pcie_hide_rc_bar(bus, devfn, where))
>> >> +		return PCIBIOS_BAD_REGISTER_NUMBER;
>> >> +
>> >> +	return pci_generic_config_read(bus, devfn, where, size, value);
>> >> +}
>> >> +
>> >> +static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie, struct device *dev)
>> >> +{
>> >> +	int domain_nr, stg_pcie_base;
>> >> +
>> >> +	pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
>> >> +	if (pcie->num_clks < 0)
>> >> +		return dev_err_probe(dev, -ENODEV,
>> >> +			"failed to get pcie clocks\n");
>> >> +
>> >> +	pcie->resets = devm_reset_control_array_get_exclusive(dev);
>> >> +	if (IS_ERR(pcie->resets))
>> >> +		return dev_err_probe(dev, PTR_ERR(pcie->resets),
>> >> +			"failed to get pcie resets");
>> >> +
>> >> +	pcie->reg_syscon =
>> >> +		syscon_regmap_lookup_by_phandle(dev->of_node,
>> >> +						"starfive,stg-syscon");
>> >> +
>> >> +	if (IS_ERR(pcie->reg_syscon))
>> >> +		return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
>> >> +			"failed to parse starfive,stg-syscon\n");
>> >> +
>> >> +	domain_nr = of_get_pci_domain_nr(dev->of_node);
>> >> +
>> >> +	if (domain_nr < 0 || domain_nr > 1)
>> >> +		return dev_err_probe(dev, -ENODEV,
>> >> +			"failed to get valid pcie id\n");
>> >> +
>> >> +	if (domain_nr == 0)
>> >> +		stg_pcie_base = STG_SYSCON_PCIE0_BASE;
>> >> +	else
>> >> +		stg_pcie_base = STG_SYSCON_PCIE1_BASE;
>> >
>> > It seems you only need the domain_nr for the determining this offset into the
>> > stg_syscon. Since this is already specific to the JH7110 SoC, wouldn't it be
>> > safer to match on the 0x2b000000/0x2c000000 or 0x940000000/0x9c0000000
>> > address of the peripheral instead?
>> >
>> Maybe this codes not just bind to JH7110 SoC.
> 
> Right, but in that case the STG_SYSCON_PCIE{0,1}_BASE offsets will also be
> different, so you'd need to get them from device tree match data anyway, and
> then you might as well have an { address, offset } table.
> Previous I discuss this with Conor,The match data is not added now.
The match data will be added While adding different device tree compatible. 
Now just one compatible.
>> >> +
>> >> +	pcie->stg_arfun = stg_pcie_base + STG_SYSCON_ARFUNC_OFFSET;
>> >> +	pcie->stg_awfun = stg_pcie_base + STG_SYSCON_AWFUNC_OFFSET;
>> >> +	pcie->stg_rp_nep = stg_pcie_base + STG_SYSCON_RP_NEP_OFFSET;
>> >> +	pcie->stg_lnksta = stg_pcie_base + STG_SYSCON_LNKSTA_OFFSET;
>> >
>> > These offsets are all the same for both pcie0 and pcie1 so why do you need a
>> > variable for each? Eg. why not just
>> >
>> > if (domain_nr == 0)
>> > 	pcie->stg_base = STG_SYSCON_PCIE0_BASE;
>> > else
>> > 	pcie->stg_base = STG_SYSCON_PCIE1_BASE;
>> >
>> > ..and then add add those static offsets where needed?
>> >
>> OK. I will try to modify this.
>> >> +
>> >> +	pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
>> >> +	if (IS_ERR(pcie->reset_gpio)) {
>> >> +		dev_warn(dev, "failed to get perst-gpio\n");
>> >
>> > Why is this a warn when you actually error out? I think you mean
>> >
>> > return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio, "failed to get
>> > reset GPIO\n");
>> >
>> >> +		return -EINVAL;
>> >> +	}
>> >> +
>> >> +	pcie->power_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
>> >> +	if (IS_ERR(pcie->power_gpio)) {
>> >> +		dev_warn(dev, "failed to get power-gpio\n");
>> >> +		return -EINVAL;
>> >
>> > return dev_err_probe(dev, PTR_ERR(pcie->power_gpio), "failed to get
>> > power GPIO\n");
>> >
>> >> +	}
>> >> +
>> >> +	return 0;
>> >> +}
>> >> +
>> >> +static struct pci_ops starfive_pcie_ops = {
>> >> +	.map_bus	= plda_pcie_map_bus,
>> >> +	.read           = starfive_pcie_config_read,
>> >> +	.write          = starfive_pcie_config_write,
>> >> +};
>> >> +
>> >> +static int starfive_pcie_clk_rst_init(struct starfive_jh7110_pcie *pcie)
>> >> +{
>> >> +	int ret;
>> >> +	struct device *dev = pcie->plda.dev;
>> >
>> > Again, please order initialized variables first.
>> >
>> >> +
>> >> +	ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
>> >> +	if (ret) {
>> >> +		dev_err(dev, "failed to enable clocks\n");
>> >> +		return ret;
>> >
>> > return dev_err_probe(dev, ret, "failed to enable clocks\n");
>> >
>> >> +	}
>> >> +
>> >> +	ret = reset_control_deassert(pcie->resets);
>> >> +	if (ret) {
>> >> +		clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
>> >> +		dev_err(dev, "failed to resets\n");
>> >
>> > I think you mean
>> > return dev_err_probe(dev, ret, "failed to deassert resets\n");
>> >
>> >> +	}
>> >> +
>> >> +	return ret;
>> >> +}
>> >> +
>> >> +static void starfive_pcie_clk_rst_deinit(struct starfive_jh7110_pcie *pcie)
>> >> +{
>> >> +	reset_control_assert(pcie->resets);
>> >> +	clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
>> >> +}
>> >> +
>> >> +static bool starfive_pcie_link_up(struct plda_pcie_rp *plda)
>> >> +{
>> >> +	struct starfive_jh7110_pcie *pcie =
>> >> +		container_of(plda, struct starfive_jh7110_pcie, plda);
>> >> +	struct device *dev = pcie->plda.dev;
>> >
>> > This is only used once below, so just use pcie->plda.dev directly there.
>> >
>> OK, thanks
>> >> +	int ret;
>> >> +	u32 stg_reg_val;
>> >> +
>> >> +	ret = regmap_read(pcie->reg_syscon, pcie->stg_lnksta, &stg_reg_val);
>> >> +	if (ret) {
>> >> +		dev_err(dev, "failed to read link status\n");
>> >> +		return false;
>> >> +	}
>> >> +
>> >> +	if (stg_reg_val & DATA_LINK_ACTIVE)
>> >> +		return true;
>> >> +
>> >> +	return false;
>> >
>> > These last 4 lines is just "return stg_reg_val & DATA_LINK_ACTIVE;" right?
>> >
>> OK
>> >> +}
>> >> +
>> >> +static int starfive_pcie_host_wait_for_link(struct starfive_jh7110_pcie *pcie)
>> >> +{
>> >> +	struct device *dev = pcie->plda.dev;
>> >
>> > Only used once, just inline.
>> >
>> >> +	int retries;
>> >> +
>> >> +	/* Check if the link is up or not */
>> >> +	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
>> >> +		if (starfive_pcie_link_up(&pcie->plda)) {
>> >> +			dev_info(dev, "port link up\n");
>> >> +			return 0;
>> >> +		}
>> >> +		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
>> >> +	}
>> >> +
>> >> +	return -ETIMEDOUT;
>> >> +}
>> >> +
>> >> +static int starfive_pcie_enable_phy(struct device *dev, struct plda_pcie_rp *pcie)
>> >> +{
>> >> +	int ret;
>> >> +
>> >> +	if (!pcie->phy)
>> >> +		return 0;
>> >> +
>> >> +	ret = phy_init(pcie->phy);
>> >> +	if (ret)
>> >> +		return dev_err_probe(dev, ret,
>> >> +			"failed to initialize pcie phy\n");
>> >> +
>> >> +	ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
>> >> +	if (ret) {
>> >> +		dev_err(dev, "failed to set pcie mode\n");
>> >> +		goto err_phy_on;
>> >> +	}
>> >> +
>> >> +	ret = phy_power_on(pcie->phy);
>> >> +	if (ret) {
>> >> +		dev_err(dev, "failed to power on pcie phy\n");
>> >> +		goto err_phy_on;
>> >> +	}
>> >> +
>> >> +	return 0;
>> >> +
>> >> +err_phy_on:
>> >> +	phy_exit(pcie->phy);
>> >> +	return ret;
>> >> +}
>> >> +
>> >> +static void starfive_pcie_disable_phy(struct plda_pcie_rp *pcie)
>> >> +{
>> >> +	phy_power_off(pcie->phy);
>> >> +	phy_exit(pcie->phy);
>> >> +}
>> >> +
>> >> +static void starfive_pcie_host_deinit(struct plda_pcie_rp *plda)
>> >> +{
>> >> +	struct starfive_jh7110_pcie *pcie =
>> >> +		container_of(plda, struct starfive_jh7110_pcie, plda);
>> >> +
>> >> +	starfive_pcie_clk_rst_deinit(pcie);
>> >> +	if (pcie->power_gpio)
>> >> +		gpiod_set_value_cansleep(pcie->power_gpio, 0);
>> >> +	starfive_pcie_disable_phy(plda);
>> >> +}
>> >> +
>> >> +static int starfive_pcie_host_init(struct plda_pcie_rp *plda)
>> >> +{
>> >> +	int i;
>> >> +	struct starfive_jh7110_pcie *pcie =
>> >> +		container_of(plda, struct starfive_jh7110_pcie, plda);
>> >> +	struct device *dev = plda->dev;
>> >> +	int ret;
>> >
>> > Weird ordering again.
>> >
>> >> +
>> >> +	ret = starfive_pcie_enable_phy(dev, plda);
>> >> +	if (ret)
>> >> +		return ret;
>> >> +
>> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_rp_nep,
>> >> +			   STG_SYSCON_K_RP_NEP, STG_SYSCON_K_RP_NEP);
>> >> +
>> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
>> >> +			   STG_SYSCON_CKREF_SRC_MASK,
>> >> +			   FIELD_PREP(STG_SYSCON_CKREF_SRC_MASK, 2));
>> >> +
>> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
>> >> +			   STG_SYSCON_CLKREQ, STG_SYSCON_CLKREQ);
>> >> +
>> >> +	ret = starfive_pcie_clk_rst_init(pcie);
>> >> +	if (ret)
>> >> +		return ret;
>> >> +
>> >> +	if (pcie->power_gpio)
>> >> +		gpiod_set_value_cansleep(pcie->power_gpio, 1);
>> >> +
>> >> +	if (pcie->reset_gpio)
>> >> +		gpiod_set_value_cansleep(pcie->reset_gpio, 1);
>> >> +
>> >> +	/* Disable physical functions except #0 */
>> >> +	for (i = 1; i < PCIE_FUNC_NUM; i++) {
>> >> +		regmap_update_bits(pcie->reg_syscon,
>> >> +				   pcie->stg_arfun,
>> >> +				   STG_SYSCON_AXI4_SLVL_ARFUNC_MASK,
>> >> +				   STG_SYSCON_AXI4_SLVL_PHY_ARFUNC(i));
>> >> +
>> >> +		regmap_update_bits(pcie->reg_syscon,
>> >> +				   pcie->stg_awfun,
>> >> +				   STG_SYSCON_AXI4_SLVL_AWFUNC_MASK,
>> >> +				   STG_SYSCON_AXI4_SLVL_PHY_AWFUNC(i));
>> >> +
>> >> +		plda_pcie_disable_func(plda);
>> >> +	}
>> >> +
>> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_arfun,
>> >> +			   STG_SYSCON_AXI4_SLVL_ARFUNC_MASK, 0);
>> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
>> >> +			   STG_SYSCON_AXI4_SLVL_AWFUNC_MASK, 0);
>> >> +
>> >> +	plda_pcie_enable_root_port(plda);
>> >> +	plda_pcie_write_rc_bar(plda, 0);
>> >> +
>> >> +	/* PCIe PCI Standard Configuration Identification Settings. */
>> >> +	plda_pcie_set_standard_class(plda);
>> >> +
>> >> +	/*
>> >> +	 * The LTR message forwarding of PCIe Message Reception was set by core
>> >> +	 * as default, but the forward id & addr are also need to be reset.
>> >> +	 * If we do not disable LTR message forwarding here, or set a legal
>> >> +	 * forwarding address, the kernel will get stuck after this driver probe.
>> >> +	 * To workaround, disable the LTR message forwarding support on
>> >> +	 * PCIe Message Reception.
>> >> +	 */
>> >> +	plda_pcie_disable_ltr(plda);
>> >> +
>> >> +	/* Prefetchable memory window 64-bit addressing support */
>> >> +	plda_pcie_set_pref_win_64bit(plda);
>> >> +
>> >> +	/* Ensure that PERST has been asserted for at least 100 ms,
>> >> +	 * the sleep value is T_PVPERL from PCIe CEM spec r2.0 (Table 2-4)
>> >> +	 */
>> >> +	msleep(100);
>> >> +	if (pcie->reset_gpio)
>> >> +		gpiod_set_value_cansleep(pcie->reset_gpio, 0);
>> >> +
>> >> +	/* As the requirement in PCIe base spec r6.0, system (<=5GT/s) must
>> >> +	 * wait a minimum of 100 ms following exit from a conventional reset
>> >> +	 * before sending a configuration request to the device.
>> >> +	 */
>> >> +	msleep(100);
>> >> +
>> >> +	if (starfive_pcie_host_wait_for_link(pcie))
>> >> +		dev_info(dev, "port link down\n");
>> >> +
>> >> +	return ret;
>> >> +}
>> >> +
>> >> +static const struct plda_pcie_host_ops sf_host_ops = {
>> >> +	.host_init = starfive_pcie_host_init,
>> >> +	.host_deinit = starfive_pcie_host_deinit,
>> >> +};
>> >> +
>> >> +static int starfive_pcie_probe(struct platform_device *pdev)
>> >> +{
>> >> +	struct device *dev = &pdev->dev;
>> >> +	struct starfive_jh7110_pcie *pcie;
>> >> +	struct plda_pcie_rp *plda;
>> >> +	int ret;
>> >> +
>> >> +	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
>> >> +	if (!pcie)
>> >> +		return -ENOMEM;
>> >> +
>> >> +	plda = &pcie->plda;
>> >> +	plda->dev = dev;
>> >> +
>> >> +	ret = starfive_pcie_parse_dt(pcie, dev);
>> >> +	if (ret)
>> >> +		return ret;
>> >> +
>> >> +	plda->host_ops = &sf_host_ops;
>> >> +	plda->num_events = NUM_PLDA_EVENTS;
>> >> +	ret = plda_pcie_host_init(&pcie->plda, &starfive_pcie_ops);
>> >> +	if (ret)
>> >> +		return ret;
>> >> +
>> >> +	pm_runtime_enable(&pdev->dev);
>> >> +	pm_runtime_get_sync(&pdev->dev);
>> >> +	platform_set_drvdata(pdev, pcie);
>> >> +
>> >> +	return 0;
>> >> +}
>> >> +
>> >> +static void starfive_pcie_remove(struct platform_device *pdev)
>> >> +{
>> >> +	struct starfive_jh7110_pcie *pcie = platform_get_drvdata(pdev);
>> >> +
>> >> +	plda_pcie_host_deinit(&pcie->plda);
>> >> +	platform_set_drvdata(pdev, NULL);
>> >> +}
>> >> +
>> >> +static int starfive_pcie_suspend_noirq(struct device *dev)
>> >> +{
>> >> +	struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
>> >> +
>> >> +	if (!pcie)
>> >> +		return 0;
>> >> +
>> >> +	clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
>> >> +	starfive_pcie_disable_phy(&pcie->plda);
>> >> +
>> >> +	return 0;
>> >> +}
>> >> +
>> >> +static int starfive_pcie_resume_noirq(struct device *dev)
>> >> +{
>> >> +	struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
>> >> +	int ret;
>> >> +
>> >> +	ret = starfive_pcie_enable_phy(dev, &pcie->plda);
>> >> +	if (ret)
>> >> +		return ret;
>> >> +
>> >> +	ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
>> >> +	if (ret) {
>> >> +		dev_err(dev, "failed to enable clocks\n");
>> >> +		starfive_pcie_disable_phy(&pcie->plda);
>> >> +		return ret;
>> >> +	}
>> >> +
>> >> +	return ret;
>> >> +}
>> >> +
>> >> +static const struct dev_pm_ops starfive_pcie_pm_ops = {
>> >> +	NOIRQ_SYSTEM_SLEEP_PM_OPS(starfive_pcie_suspend_noirq,
>> >> +				  starfive_pcie_resume_noirq)
>> >> +};
>> >> +
>> >> +static const struct of_device_id starfive_pcie_of_match[] = {
>> >> +	{ .compatible = "starfive,jh7110-pcie"},
>> >
>> > Missing space before }
>> >
>> >> +	{ /* sentinel */ }
>> >> +};
>> >> +MODULE_DEVICE_TABLE(of, starfive_pcie_of_match);
>> >> +
>> >> +static struct platform_driver starfive_pcie_driver = {
>> >> +	.driver = {
>> >> +		.name = "pcie-starfive",
>> >> +		.of_match_table = of_match_ptr(starfive_pcie_of_match),
>> >> +#ifdef CONFIG_PM_SLEEP
>> >> +		.pm = &starfive_pcie_pm_ops,
>> >> +#endif
>> >
>> > This can be just .pm = pm_sleep_ptr(&starfive_pcie_pm_ops),
>> >
>> OK
>> >> +	},
>> >> +	.probe = starfive_pcie_probe,
>> >> +	.remove_new = starfive_pcie_remove,
>> >> +};
>> >> +module_platform_driver(starfive_pcie_driver);
>> >> +
>> >> +MODULE_DESCRIPTION("StarFive JH7110 PCIe host driver");
>> >> +MODULE_LICENSE("GPL v2");
>> >> --
>> >> 2.17.1
  
Emil Renner Berthing Sept. 21, 2023, 11:05 a.m. UTC | #6
Minda Chen wrote:
>
>
> On 2023/9/19 19:34, Emil Renner Berthing wrote:
> > Minda Chen wrote:
> >>
> >>
> >> On 2023/9/18 6:13, Emil Renner Berthing wrote:
> >> > Minda Chen wrote:
> >> >> Add StarFive JH7110 SoC PCIe controller platform
> >> >> driver codes, and add host init/deinit to pcie-plda-host.c
> >> >>
> >> >> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> >> >> Co-developed-by: Kevin Xie <kevin.xie@starfivetech.com>
> >> >> Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
> >> >> ---
> >> >>  MAINTAINERS                                  |   7 +
> >> >>  drivers/pci/controller/plda/Kconfig          |  12 +
> >> >>  drivers/pci/controller/plda/Makefile         |   1 +
> >> >>  drivers/pci/controller/plda/pcie-plda-host.c | 121 ++++-
> >> >>  drivers/pci/controller/plda/pcie-plda.h      |  91 +++-
> >> >>  drivers/pci/controller/plda/pcie-starfive.c  | 461 +++++++++++++++++++
> >> >>  6 files changed, 688 insertions(+), 5 deletions(-)
> >> >>  create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
> >> >>
> >> >> diff --git a/MAINTAINERS b/MAINTAINERS
> >> >> index ebdb65e195ee..4632cd411a3d 100644
> >> >> --- a/MAINTAINERS
> >> >> +++ b/MAINTAINERS
> >> >> @@ -16679,6 +16679,13 @@ S:	Maintained
> >> >>  F:	Documentation/devicetree/bindings/pci/socionext,uniphier-pcie*
> >> >>  F:	drivers/pci/controller/dwc/pcie-uniphier*
> >> >>
> >> >> +PCIE DRIVER FOR STARFIVE JH71x0
> >> >> +M:	Kevin Xie <kevin.xie@starfivetech.com>
> >> >> +L:	linux-pci@vger.kernel.org
> >> >> +S:	Maintained
> >> >> +F:	Documentation/devicetree/bindings/pci/starfive*
> >> >> +F:	drivers/pci/controller/plda/pcie-starfive.c
> >> >> +
> >> >>  PCIE DRIVER FOR ST SPEAR13XX
> >> >>  M:	Pratyush Anand <pratyush.anand@gmail.com>
> >> >>  L:	linux-pci@vger.kernel.org
> >> >> diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
> >> >> index e54a82ee94f5..8de661730aa5 100644
> >> >> --- a/drivers/pci/controller/plda/Kconfig
> >> >> +++ b/drivers/pci/controller/plda/Kconfig
> >> >> @@ -15,4 +15,16 @@ config PCIE_MICROCHIP_HOST
> >> >>  	  Say Y here if you want kernel to support the Microchip AXI PCIe
> >> >>  	  Host Bridge driver.
> >> >>
> >> >> +config PCIE_STARFIVE_HOST
> >> >> +	tristate "StarFive PCIe host controller"
> >> >> +	depends on OF && PCI_MSI
> >> >> +	select PCIE_PLDA_HOST
> >> >> +	help
> >> >> +	  Say Y here if you want to support the StarFive PCIe controller
> >> >> +	  in host mode. StarFive PCIe controller uses PLDA PCIe
> >> >> +	  core.
> >> >> +	  If you choose to build this driver as module it will
> >> >> +	  be dynamically linked and module will be called
> >> >> +	  pcie-starfive.ko
> >> >> +
> >> >>  endmenu
> >> >> diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
> >> >> index 4340ab007f44..0ac6851bed48 100644
> >> >> --- a/drivers/pci/controller/plda/Makefile
> >> >> +++ b/drivers/pci/controller/plda/Makefile
> >> >> @@ -1,3 +1,4 @@
> >> >>  # SPDX-License-Identifier: GPL-2.0
> >> >>  obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
> >> >>  obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
> >> >> +obj-$(CONFIG_PCIE_STARFIVE_HOST) += pcie-starfive.o
> >> >> diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
> >> >> index 26e6cfd2eaba..8b32df477ad8 100644
> >> >> --- a/drivers/pci/controller/plda/pcie-plda-host.c
> >> >> +++ b/drivers/pci/controller/plda/pcie-plda-host.c
> >> >> @@ -20,6 +20,15 @@
> >> >>
> >> >>  #include "pcie-plda.h"
> >> >>
> >> >> +void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
> >> >> +				int where)
> >> >> +{
> >> >> +	struct plda_pcie_rp *pcie = bus->sysdata;
> >> >> +
> >> >> +	return pcie->config_base + PCIE_ECAM_OFFSET(bus->number, devfn, where);
> >> >> +}
> >> >> +EXPORT_SYMBOL_GPL(plda_pcie_map_bus);
> >> >> +
> >> >>  static void plda_handle_msi(struct irq_desc *desc)
> >> >>  {
> >> >>  	struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
> >> >> @@ -370,6 +379,12 @@ static const struct plda_event_ops plda_event_ops = {
> >> >>  	.get_events = plda_get_events,
> >> >>  };
> >> >>
> >> >> +static const struct plda_event plda_default_event = {
> >> >> +	.event_ops		= &plda_event_ops,
> >> >> +	.intx_event		= EVENT_PM_MSI_INT_INTX,
> >> >> +	.msi_event		= EVENT_PM_MSI_INT_MSI
> >> >> +};
> >> >> +
> >> >>  static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port,
> >> >>  				      const struct irq_domain_ops *ops)
> >> >>  {
> >> >> @@ -416,7 +431,6 @@ int plda_init_interrupts(struct platform_device *pdev,
> >> >>  			 const struct plda_event *event)
> >> >>  {
> >> >>  	struct device *dev = &pdev->dev;
> >> >> -	int irq;
> >> >>  	int i, intx_irq, msi_irq, event_irq;
> >> >>  	int ret;
> >> >>  	const struct irq_domain_ops *irq_dom_ops;
> >> >> @@ -434,8 +448,8 @@ int plda_init_interrupts(struct platform_device *pdev,
> >> >>  		return ret;
> >> >>  	}
> >> >>
> >> >> -	irq = platform_get_irq(pdev, 0);
> >> >> -	if (irq < 0)
> >> >> +	port->irq = platform_get_irq(pdev, 0);
> >> >> +	if (port->irq < 0)
> >> >>  		return -ENODEV;
> >> >
> >> > Here you're dropping the local variable irq and just use port->irq directly..
> >> >
> >> >>
> >> >>  	port->event_ops = event->event_ops;
> >> >> @@ -465,6 +479,7 @@ int plda_init_interrupts(struct platform_device *pdev,
> >> >>  		dev_err(dev, "failed to map INTx interrupt\n");
> >> >>  		return -ENXIO;
> >> >>  	}
> >> >> +	port->intx_irq = intx_irq;
> >> >
> >> > ..but for intx_irq..
> >> >
> >> >>
> >> >>  	/* Plug the INTx chained handler */
> >> >>  	irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
> >> >> @@ -473,12 +488,13 @@ int plda_init_interrupts(struct platform_device *pdev,
> >> >>  				     event->msi_event);
> >> >>  	if (!msi_irq)
> >> >>  		return -ENXIO;
> >> >> +	port->msi_irq = msi_irq;
> >> >
> >> > ..and msi_irq you're keeping the local variable. I think you should drop
> >> > the local variables here too, or at least do the same for all of them.
> >> >
> >> OK, remove all the local variables is better.
> >> >>
> >> >>  	/* Plug the MSI chained handler */
> >> >>  	irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
> >> >>
> >> >>  	/* Plug the main event chained handler */
> >> >> -	irq_set_chained_handler_and_data(irq, plda_handle_event, port);
> >> >> +	irq_set_chained_handler_and_data(port->irq, plda_handle_event, port);
> >> >>
> >> >>  	return 0;
> >> >>  }
> >> >> @@ -544,3 +560,100 @@ int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> >> >>  	return 0;
> >> >>  }
> >> >>  EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
> >> >> +
> >> >> +static void plda_pcie_irq_domain_deinit(struct plda_pcie_rp *pcie)
> >> >> +{
> >> >> +	irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
> >> >> +	irq_set_chained_handler_and_data(pcie->msi_irq, NULL, NULL);
> >> >> +	irq_set_chained_handler_and_data(pcie->intx_irq, NULL, NULL);
> >> >> +
> >> >> +	irq_domain_remove(pcie->msi.msi_domain);
> >> >> +	irq_domain_remove(pcie->msi.dev_domain);
> >> >> +
> >> >> +	irq_domain_remove(pcie->intx_domain);
> >> >> +	irq_domain_remove(pcie->event_domain);
> >> >> +}
> >> >> +
> >> >> +int plda_pcie_host_init(struct plda_pcie_rp *port, struct pci_ops *ops)
> >> >> +{
> >> >> +	struct resource *cfg_res;
> >> >> +	struct device *dev = port->dev;
> >> >> +	int ret;
> >> >> +	struct pci_host_bridge *bridge;
> >> >> +	struct platform_device *pdev = to_platform_device(dev);
> >> >
> >> > This looks weird. Please order initialized variables first and maybe even do
> >> > reverse christmas tree order. Eg. longeist lines first.
> >> >
> >> OK, The same with other places.
> >> >> +
> >> >> +	port->bridge_addr =
> >> >> +		devm_platform_ioremap_resource_byname(pdev, "apb");
> >> >> +
> >> >> +	if (IS_ERR(port->bridge_addr))
> >> >> +		return dev_err_probe(dev, PTR_ERR(port->bridge_addr),
> >> >> +				     "failed to map reg memory\n");
> >> >> +
> >> >> +	cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
> >> >> +	if (!cfg_res)
> >> >> +		return dev_err_probe(dev, -ENODEV,
> >> >> +				     "failed to get config memory\n");
> >> >> +
> >> >> +	port->config_base = devm_ioremap_resource(dev, cfg_res);
> >> >> +	if (IS_ERR(port->config_base))
> >> >> +		return dev_err_probe(dev, PTR_ERR(port->config_base),
> >> >> +				     "failed to map config memory\n");
> >> >> +
> >> >> +	port->phy = devm_phy_optional_get(dev, NULL);
> >> >> +	if (IS_ERR(port->phy))
> >> >> +		return dev_err_probe(dev, PTR_ERR(port->phy),
> >> >> +				     "failed to get pcie phy\n");
> >> >> +
> >> >> +	bridge = devm_pci_alloc_host_bridge(dev, 0);
> >> >> +	if (!bridge)
> >> >> +		return dev_err_probe(dev, -ENOMEM,
> >> >> +				     "failed to alloc bridge\n");
> >> >> +
> >> >> +	if (port->host_ops && port->host_ops->host_init) {
> >> >> +		ret = port->host_ops->host_init(port);
> >> >> +		if (ret)
> >> >> +			return ret;
> >> >> +	}
> >> >> +
> >> >> +	port->bridge = bridge;
> >> >> +	plda_pcie_setup_window(port->bridge_addr, 0, cfg_res->start, 0,
> >> >> +			       resource_size(cfg_res));
> >> >> +	plda_pcie_setup_iomems(bridge, port);
> >> >> +	plda_set_default_msi(&port->msi);
> >> >> +	ret = plda_init_interrupts(pdev, port, &plda_default_event);
> >> >> +	if (ret)
> >> >> +		goto err_host;
> >> >> +
> >> >> +	/* Set default bus ops */
> >> >> +	bridge->ops = ops;
> >> >> +	bridge->sysdata = port;
> >> >> +
> >> >> +	ret = pci_host_probe(bridge);
> >> >> +	if (ret < 0) {
> >> >> +		dev_err(dev, "failed to pci host probe: %d\n", ret);
> >> >
> >> > I think you mean:
> >> >
> >> > dev_err_probe(dev, ret, "failed to probe pci host\n");
> >> >
> >> I check with dev_err_probe, It is better than dev_err, I will replace this.
> >> >> +		goto err_probe;
> >> >> +	}
> >> >> +
> >> >> +	return ret;
> >> >> +
> >> >> +err_probe:
> >> >> +	plda_pcie_irq_domain_deinit(port);
> >> >> +err_host:
> >> >> +	if (port->host_ops && port->host_ops->host_deinit)
> >> >> +		port->host_ops->host_deinit(port);
> >> >> +
> >> >> +	return ret;
> >> >> +}
> >> >> +EXPORT_SYMBOL_GPL(plda_pcie_host_init);
> >> >> +
> >> >> +void plda_pcie_host_deinit(struct plda_pcie_rp *port)
> >> >> +{
> >> >> +	pci_stop_root_bus(port->bridge->bus);
> >> >> +	pci_remove_root_bus(port->bridge->bus);
> >> >> +
> >> >> +	plda_pcie_irq_domain_deinit(port);
> >> >> +
> >> >> +	if (port->host_ops && port->host_ops->host_deinit)
> >> >> +		port->host_ops->host_deinit(port);
> >> >> +}
> >> >> +EXPORT_SYMBOL_GPL(plda_pcie_host_deinit);
> >> >> diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
> >> >> index b7420598a326..e571047d7944 100644
> >> >> --- a/drivers/pci/controller/plda/pcie-plda.h
> >> >> +++ b/drivers/pci/controller/plda/pcie-plda.h
> >> >> @@ -6,14 +6,24 @@
> >> >>  #ifndef _PCIE_PLDA_H
> >> >>  #define _PCIE_PLDA_H
> >> >>
> >> >> +#include <linux/phy/phy.h>
> >> >> +
> >> >>  /* Number of MSI IRQs */
> >> >>  #define PLDA_MAX_NUM_MSI_IRQS			32
> >> >>
> >> >>  /* PCIe Bridge Phy Regs */
> >> >> +#define GEN_SETTINGS				0x80
> >> >> +#define  RP_ENABLE				1
> >> >> +#define PCIE_PCI_IDS_DW1			0x9c
> >> >> +#define  IDS_CLASS_CODE_SHIFT			16
> >> >>  #define PCIE_PCI_IRQ_DW0			0xa8
> >> >>  #define  MSIX_CAP_MASK				BIT(31)
> >> >>  #define  NUM_MSI_MSGS_MASK			GENMASK(6, 4)
> >> >>  #define  NUM_MSI_MSGS_SHIFT			4
> >> >> +#define PCI_MISC				0xb4
> >> >> +#define  PHY_FUNCTION_DIS			BIT(15)
> >> >> +#define PCIE_WINROM				0xfc
> >> >> +#define  PREF_MEM_WIN_64_SUPPORT		BIT(3)
> >> >>
> >> >>  #define IMASK_LOCAL				0x180
> >> >>  #define  DMA_END_ENGINE_0_MASK			0x00000000u
> >> >> @@ -64,6 +74,8 @@
> >> >>  #define ISTATUS_HOST				0x18c
> >> >>  #define IMSI_ADDR				0x190
> >> >>  #define ISTATUS_MSI				0x194
> >> >> +#define PMSG_SUPPORT_RX				0x3f0
> >> >> +#define  PMSG_LTR_SUPPORT			BIT(2)
> >> >>
> >> >>  /* PCIe Master table init defines */
> >> >>  #define ATR0_PCIE_WIN0_SRCADDR_PARAM		0x600u
> >> >> @@ -85,6 +97,8 @@
> >> >>  #define  PCIE_TX_RX_INTERFACE			0x00000000u
> >> >>  #define  PCIE_CONFIG_INTERFACE			0x00000001u
> >> >>
> >> >> +#define CONFIG_SPACE_ADDR			0x1000u
> >> >> +
> >> >>  #define ATR_ENTRY_SIZE				32
> >> >>
> >> >>  #define EVENT_A_ATR_EVT_POST_ERR		0
> >> >> @@ -134,6 +148,11 @@ struct plda_event_ops {
> >> >>  	u32 (*get_events)(struct plda_pcie_rp *pcie);
> >> >>  };
> >> >>
> >> >> +struct plda_pcie_host_ops {
> >> >> +	int (*host_init)(struct plda_pcie_rp *pcie);
> >> >> +	void (*host_deinit)(struct plda_pcie_rp *pcie);
> >> >> +};
> >> >> +
> >> >>  struct plda_msi {
> >> >>  	struct mutex lock;		/* Protect used bitmap */
> >> >>  	struct irq_domain *msi_domain;
> >> >> @@ -145,12 +164,19 @@ struct plda_msi {
> >> >>
> >> >>  struct plda_pcie_rp {
> >> >>  	struct device *dev;
> >> >> +	struct pci_host_bridge *bridge;
> >> >>  	struct irq_domain *intx_domain;
> >> >>  	struct irq_domain *event_domain;
> >> >>  	raw_spinlock_t lock;
> >> >>  	struct plda_msi msi;
> >> >>  	const struct plda_event_ops *event_ops;
> >> >> +	const struct plda_pcie_host_ops *host_ops;
> >> >> +	struct phy *phy;
> >> >>  	void __iomem *bridge_addr;
> >> >> +	void __iomem *config_base;
> >> >> +	int irq;
> >> >> +	int msi_irq;
> >> >> +	int intx_irq;
> >> >>  	int num_events;
> >> >>  };
> >> >>
> >> >> @@ -163,6 +189,7 @@ struct plda_event {
> >> >>  	int msi_event;
> >> >>  };
> >> >>
> >> >> +void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn, int where);
> >> >>  int plda_init_interrupts(struct platform_device *pdev,
> >> >>  			 struct plda_pcie_rp *port,
> >> >>  			 const struct plda_event *event);
> >> >> @@ -171,4 +198,66 @@ void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
> >> >>  			    size_t size);
> >> >>  int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> >> >>  			   struct plda_pcie_rp *port);
> >> >> -#endif
> >> >> +int plda_pcie_host_init(struct plda_pcie_rp *pcie, struct pci_ops *ops);
> >> >> +void plda_pcie_host_deinit(struct plda_pcie_rp *pcie);
> >> >> +
> >> >> +static inline void plda_set_default_msi(struct plda_msi *msi)
> >> >> +{
> >> >> +	msi->vector_phy = IMSI_ADDR;
> >> >> +	msi->num_vectors = PLDA_MAX_NUM_MSI_IRQS;
> >> >> +}
> >> >> +
> >> >> +static inline void plda_pcie_enable_root_port(struct plda_pcie_rp *plda)
> >> >> +{
> >> >> +	u32 value;
> >> >> +
> >> >> +	value = readl_relaxed(plda->bridge_addr + GEN_SETTINGS);
> >> >> +	value |= RP_ENABLE;
> >> >> +	writel_relaxed(value, plda->bridge_addr + GEN_SETTINGS);
> >> >> +}
> >> >> +
> >> >> +static inline void plda_pcie_set_standard_class(struct plda_pcie_rp *plda)
> >> >> +{
> >> >> +	u32 value;
> >> >> +
> >> >> +	value = readl_relaxed(plda->bridge_addr + PCIE_PCI_IDS_DW1);
> >> >> +	value &= 0xff;
> >> >> +	value |= (PCI_CLASS_BRIDGE_PCI << IDS_CLASS_CODE_SHIFT);
> >> >
> >> > This looks suspicious. You're clearing the lower 8 bits, but setting
> >> > bits 16 and up. Also the parentheses are not strictly necessary.
> >> >
> >> I will add comments to this.
> >> >> +	writel_relaxed(value, plda->bridge_addr + PCIE_PCI_IDS_DW1);
> >> >> +}
> >> >> +
> >> >> +static inline void plda_pcie_set_pref_win_64bit(struct plda_pcie_rp *plda)
> >> >> +{
> >> >> +	u32 value;
> >> >> +
> >> >> +	value = readl_relaxed(plda->bridge_addr + PCIE_WINROM);
> >> >> +	value |= PREF_MEM_WIN_64_SUPPORT;
> >> >> +	writel_relaxed(value, plda->bridge_addr + PCIE_WINROM);
> >> >> +}
> >> >> +
> >> >> +static inline void plda_pcie_disable_ltr(struct plda_pcie_rp *plda)
> >> >> +{
> >> >> +	u32 value;
> >> >> +
> >> >> +	value = readl_relaxed(plda->bridge_addr + PMSG_SUPPORT_RX);
> >> >> +	value &= ~PMSG_LTR_SUPPORT;
> >> >> +	writel_relaxed(value, plda->bridge_addr + PMSG_SUPPORT_RX);
> >> >> +}
> >> >> +
> >> >> +static inline void plda_pcie_disable_func(struct plda_pcie_rp *plda)
> >> >> +{
> >> >> +	u32 value;
> >> >> +
> >> >> +	value = readl_relaxed(plda->bridge_addr + PCI_MISC);
> >> >> +	value |= PHY_FUNCTION_DIS;
> >> >> +	writel_relaxed(value, plda->bridge_addr + PCI_MISC);
> >> >> +}
> >> >> +
> >> >> +static inline void plda_pcie_write_rc_bar(struct plda_pcie_rp *plda, u64 val)
> >> >> +{
> >> >> +	void __iomem *addr = plda->bridge_addr + CONFIG_SPACE_ADDR;
> >> >> +
> >> >> +	writel_relaxed(val & 0xffffffff, addr + PCI_BASE_ADDRESS_0);
> >> >> +	writel_relaxed(val >> 32, addr + PCI_BASE_ADDRESS_1);
> >> >
> >> > Consider using lower_32_bits(val) and upper_32_bits(val) here.
> >> >
> >> >> +}
> >> >> +#endif /* _PCIE_PLDA_H */
> >> >> diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
> >> >> new file mode 100644
> >> >> index 000000000000..42099fef0d7d
> >> >> --- /dev/null
> >> >> +++ b/drivers/pci/controller/plda/pcie-starfive.c
> >> >> @@ -0,0 +1,461 @@
> >> >> +// SPDX-License-Identifier: GPL-2.0+
> >> >> +/*
> >> >> + * PCIe host controller driver for StarFive JH7110 Soc.
> >> >> + *
> >> >> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
> >> >> + */
> >> >> +
> >> >> +#include <linux/bitfield.h>
> >> >> +#include <linux/clk.h>
> >> >> +#include <linux/delay.h>
> >> >> +#include <linux/gpio/consumer.h>
> >> >> +#include <linux/interrupt.h>
> >> >> +#include <linux/kernel.h>
> >> >> +#include <linux/mfd/syscon.h>
> >> >> +#include <linux/module.h>
> >> >> +#include <linux/of_address.h>
> >> >> +#include <linux/of_irq.h>
> >> >> +#include <linux/of_pci.h>
> >> >> +#include <linux/pci.h>
> >> >> +#include <linux/platform_device.h>
> >> >> +#include <linux/pm_runtime.h>
> >> >> +#include <linux/regmap.h>
> >> >> +#include <linux/reset.h>
> >> >> +#include "../../pci.h"
> >> >> +
> >> >> +#include "pcie-plda.h"
> >> >> +
> >> >> +#define PCIE_FUNC_NUM			4
> >> >> +
> >> >> +/* system control */
> >> >> +#define STG_SYSCON_PCIE0_BASE			0x48
> >> >> +#define STG_SYSCON_PCIE1_BASE			0x1f8
> >> >> +
> >> >> +#define STG_SYSCON_ARFUNC_OFFSET		0x78
> >> >> +#define STG_SYSCON_AXI4_SLVL_ARFUNC_MASK	 GENMASK(22, 8)
> >> >> +#define STG_SYSCON_AXI4_SLVL_PHY_ARFUNC(x)	 FIELD_PREP(GENMASK(20, 17), x)
> >> >> +#define STG_SYSCON_AWFUNC_OFFSET		0x7c
> >> >> +#define STG_SYSCON_AXI4_SLVL_AWFUNC_MASK	 GENMASK(14, 0)
> >> >> +#define STG_SYSCON_AXI4_SLVL_PHY_AWFUNC(x)	 FIELD_PREP(GENMASK(12, 9), x)
> >> >> +#define STG_SYSCON_CLKREQ			 BIT(22)
> >> >> +#define STG_SYSCON_CKREF_SRC_MASK		 GENMASK(19, 18)
> >> >> +#define STG_SYSCON_RP_NEP_OFFSET		0xe8
> >> >> +#define STG_SYSCON_K_RP_NEP			 BIT(8)
> >> >> +#define STG_SYSCON_LNKSTA_OFFSET		0x170
> >> >> +#define DATA_LINK_ACTIVE			 BIT(5)
> >> >> +
> >> >> +/* Parameters for the waiting for link up routine */
> >> >> +#define LINK_WAIT_MAX_RETRIES	10
> >> >> +#define LINK_WAIT_USLEEP_MIN	90000
> >> >> +#define LINK_WAIT_USLEEP_MAX	100000
> >> >> +
> >> >> +struct starfive_jh7110_pcie {
> >> >> +	struct plda_pcie_rp plda;
> >> >> +	struct reset_control *resets;
> >> >> +	struct clk_bulk_data *clks;
> >> >> +	struct regmap *reg_syscon;
> >> >> +	struct gpio_desc *power_gpio;
> >> >> +	struct gpio_desc *reset_gpio;
> >> >> +
> >> >> +	u32 stg_arfun;
> >> >> +	u32 stg_awfun;
> >> >> +	u32 stg_rp_nep;
> >> >> +	u32 stg_lnksta;
> >> >> +
> >> >> +	int num_clks;
> >> >> +};
> >> >> +
> >> >> +/*
> >> >> + * The BAR0/1 of bridge should be hidden during enumeration to
> >> >> + * avoid the sizing and resource allocation by PCIe core.
> >> >> + */
> >> >> +static bool starfive_pcie_hide_rc_bar(struct pci_bus *bus, unsigned int  devfn,
> >> >> +				      int offset)
> >> >> +{
> >> >> +	if (pci_is_root_bus(bus) && !devfn &&
> >> >> +	    (offset == PCI_BASE_ADDRESS_0 || offset == PCI_BASE_ADDRESS_1))
> >> >> +		return true;
> >> >> +
> >> >> +	return false;
> >> >> +}
> >> >> +
> >> >> +static int starfive_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
> >> >> +				      int where, int size, u32 value)
> >> >> +{
> >> >> +	if (starfive_pcie_hide_rc_bar(bus, devfn, where))
> >> >> +		return PCIBIOS_BAD_REGISTER_NUMBER;
> >> >> +
> >> >> +	return pci_generic_config_write(bus, devfn, where, size, value);
> >> >> +}
> >> >> +
> >> >> +static int starfive_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
> >> >> +				     int where, int size, u32 *value)
> >> >> +{
> >> >> +	if (starfive_pcie_hide_rc_bar(bus, devfn, where))
> >> >> +		return PCIBIOS_BAD_REGISTER_NUMBER;
> >> >> +
> >> >> +	return pci_generic_config_read(bus, devfn, where, size, value);
> >> >> +}
> >> >> +
> >> >> +static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie, struct device *dev)
> >> >> +{
> >> >> +	int domain_nr, stg_pcie_base;
> >> >> +
> >> >> +	pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
> >> >> +	if (pcie->num_clks < 0)
> >> >> +		return dev_err_probe(dev, -ENODEV,
> >> >> +			"failed to get pcie clocks\n");
> >> >> +
> >> >> +	pcie->resets = devm_reset_control_array_get_exclusive(dev);
> >> >> +	if (IS_ERR(pcie->resets))
> >> >> +		return dev_err_probe(dev, PTR_ERR(pcie->resets),
> >> >> +			"failed to get pcie resets");
> >> >> +
> >> >> +	pcie->reg_syscon =
> >> >> +		syscon_regmap_lookup_by_phandle(dev->of_node,
> >> >> +						"starfive,stg-syscon");
> >> >> +
> >> >> +	if (IS_ERR(pcie->reg_syscon))
> >> >> +		return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
> >> >> +			"failed to parse starfive,stg-syscon\n");
> >> >> +
> >> >> +	domain_nr = of_get_pci_domain_nr(dev->of_node);
> >> >> +
> >> >> +	if (domain_nr < 0 || domain_nr > 1)
> >> >> +		return dev_err_probe(dev, -ENODEV,
> >> >> +			"failed to get valid pcie id\n");
> >> >> +
> >> >> +	if (domain_nr == 0)
> >> >> +		stg_pcie_base = STG_SYSCON_PCIE0_BASE;
> >> >> +	else
> >> >> +		stg_pcie_base = STG_SYSCON_PCIE1_BASE;
> >> >
> >> > It seems you only need the domain_nr for the determining this offset into the
> >> > stg_syscon. Since this is already specific to the JH7110 SoC, wouldn't it be
> >> > safer to match on the 0x2b000000/0x2c000000 or 0x940000000/0x9c0000000
> >> > address of the peripheral instead?
> >> >
> >> Maybe this codes not just bind to JH7110 SoC.
> >
> > Right, but in that case the STG_SYSCON_PCIE{0,1}_BASE offsets will also be
> > different, so you'd need to get them from device tree match data anyway, and
> > then you might as well have an { address, offset } table.
> > Previous I discuss this with Conor,The match data is not added now.
> The match data will be added While adding different device tree compatible.
> Now just one compatible.

Exactly. So for now there should be now problem matching on the
peripheral address.

> >> >> +
> >> >> +	pcie->stg_arfun = stg_pcie_base + STG_SYSCON_ARFUNC_OFFSET;
> >> >> +	pcie->stg_awfun = stg_pcie_base + STG_SYSCON_AWFUNC_OFFSET;
> >> >> +	pcie->stg_rp_nep = stg_pcie_base + STG_SYSCON_RP_NEP_OFFSET;
> >> >> +	pcie->stg_lnksta = stg_pcie_base + STG_SYSCON_LNKSTA_OFFSET;
> >> >
> >> > These offsets are all the same for both pcie0 and pcie1 so why do you need a
> >> > variable for each? Eg. why not just
> >> >
> >> > if (domain_nr == 0)
> >> > 	pcie->stg_base = STG_SYSCON_PCIE0_BASE;
> >> > else
> >> > 	pcie->stg_base = STG_SYSCON_PCIE1_BASE;
> >> >
> >> > ..and then add add those static offsets where needed?
> >> >
> >> OK. I will try to modify this.
> >> >> +
> >> >> +	pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
> >> >> +	if (IS_ERR(pcie->reset_gpio)) {
> >> >> +		dev_warn(dev, "failed to get perst-gpio\n");
> >> >
> >> > Why is this a warn when you actually error out? I think you mean
> >> >
> >> > return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio, "failed to get
> >> > reset GPIO\n");
> >> >
> >> >> +		return -EINVAL;
> >> >> +	}
> >> >> +
> >> >> +	pcie->power_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
> >> >> +	if (IS_ERR(pcie->power_gpio)) {
> >> >> +		dev_warn(dev, "failed to get power-gpio\n");
> >> >> +		return -EINVAL;
> >> >
> >> > return dev_err_probe(dev, PTR_ERR(pcie->power_gpio), "failed to get
> >> > power GPIO\n");
> >> >
> >> >> +	}
> >> >> +
> >> >> +	return 0;
> >> >> +}
> >> >> +
> >> >> +static struct pci_ops starfive_pcie_ops = {
> >> >> +	.map_bus	= plda_pcie_map_bus,
> >> >> +	.read           = starfive_pcie_config_read,
> >> >> +	.write          = starfive_pcie_config_write,
> >> >> +};
> >> >> +
> >> >> +static int starfive_pcie_clk_rst_init(struct starfive_jh7110_pcie *pcie)
> >> >> +{
> >> >> +	int ret;
> >> >> +	struct device *dev = pcie->plda.dev;
> >> >
> >> > Again, please order initialized variables first.
> >> >
> >> >> +
> >> >> +	ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
> >> >> +	if (ret) {
> >> >> +		dev_err(dev, "failed to enable clocks\n");
> >> >> +		return ret;
> >> >
> >> > return dev_err_probe(dev, ret, "failed to enable clocks\n");
> >> >
> >> >> +	}
> >> >> +
> >> >> +	ret = reset_control_deassert(pcie->resets);
> >> >> +	if (ret) {
> >> >> +		clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> >> >> +		dev_err(dev, "failed to resets\n");
> >> >
> >> > I think you mean
> >> > return dev_err_probe(dev, ret, "failed to deassert resets\n");
> >> >
> >> >> +	}
> >> >> +
> >> >> +	return ret;
> >> >> +}
> >> >> +
> >> >> +static void starfive_pcie_clk_rst_deinit(struct starfive_jh7110_pcie *pcie)
> >> >> +{
> >> >> +	reset_control_assert(pcie->resets);
> >> >> +	clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> >> >> +}
> >> >> +
> >> >> +static bool starfive_pcie_link_up(struct plda_pcie_rp *plda)
> >> >> +{
> >> >> +	struct starfive_jh7110_pcie *pcie =
> >> >> +		container_of(plda, struct starfive_jh7110_pcie, plda);
> >> >> +	struct device *dev = pcie->plda.dev;
> >> >
> >> > This is only used once below, so just use pcie->plda.dev directly there.
> >> >
> >> OK, thanks
> >> >> +	int ret;
> >> >> +	u32 stg_reg_val;
> >> >> +
> >> >> +	ret = regmap_read(pcie->reg_syscon, pcie->stg_lnksta, &stg_reg_val);
> >> >> +	if (ret) {
> >> >> +		dev_err(dev, "failed to read link status\n");
> >> >> +		return false;
> >> >> +	}
> >> >> +
> >> >> +	if (stg_reg_val & DATA_LINK_ACTIVE)
> >> >> +		return true;
> >> >> +
> >> >> +	return false;
> >> >
> >> > These last 4 lines is just "return stg_reg_val & DATA_LINK_ACTIVE;" right?
> >> >
> >> OK
> >> >> +}
> >> >> +
> >> >> +static int starfive_pcie_host_wait_for_link(struct starfive_jh7110_pcie *pcie)
> >> >> +{
> >> >> +	struct device *dev = pcie->plda.dev;
> >> >
> >> > Only used once, just inline.
> >> >
> >> >> +	int retries;
> >> >> +
> >> >> +	/* Check if the link is up or not */
> >> >> +	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
> >> >> +		if (starfive_pcie_link_up(&pcie->plda)) {
> >> >> +			dev_info(dev, "port link up\n");
> >> >> +			return 0;
> >> >> +		}
> >> >> +		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
> >> >> +	}
> >> >> +
> >> >> +	return -ETIMEDOUT;
> >> >> +}
> >> >> +
> >> >> +static int starfive_pcie_enable_phy(struct device *dev, struct plda_pcie_rp *pcie)
> >> >> +{
> >> >> +	int ret;
> >> >> +
> >> >> +	if (!pcie->phy)
> >> >> +		return 0;
> >> >> +
> >> >> +	ret = phy_init(pcie->phy);
> >> >> +	if (ret)
> >> >> +		return dev_err_probe(dev, ret,
> >> >> +			"failed to initialize pcie phy\n");
> >> >> +
> >> >> +	ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
> >> >> +	if (ret) {
> >> >> +		dev_err(dev, "failed to set pcie mode\n");
> >> >> +		goto err_phy_on;
> >> >> +	}
> >> >> +
> >> >> +	ret = phy_power_on(pcie->phy);
> >> >> +	if (ret) {
> >> >> +		dev_err(dev, "failed to power on pcie phy\n");
> >> >> +		goto err_phy_on;
> >> >> +	}
> >> >> +
> >> >> +	return 0;
> >> >> +
> >> >> +err_phy_on:
> >> >> +	phy_exit(pcie->phy);
> >> >> +	return ret;
> >> >> +}
> >> >> +
> >> >> +static void starfive_pcie_disable_phy(struct plda_pcie_rp *pcie)
> >> >> +{
> >> >> +	phy_power_off(pcie->phy);
> >> >> +	phy_exit(pcie->phy);
> >> >> +}
> >> >> +
> >> >> +static void starfive_pcie_host_deinit(struct plda_pcie_rp *plda)
> >> >> +{
> >> >> +	struct starfive_jh7110_pcie *pcie =
> >> >> +		container_of(plda, struct starfive_jh7110_pcie, plda);
> >> >> +
> >> >> +	starfive_pcie_clk_rst_deinit(pcie);
> >> >> +	if (pcie->power_gpio)
> >> >> +		gpiod_set_value_cansleep(pcie->power_gpio, 0);
> >> >> +	starfive_pcie_disable_phy(plda);
> >> >> +}
> >> >> +
> >> >> +static int starfive_pcie_host_init(struct plda_pcie_rp *plda)
> >> >> +{
> >> >> +	int i;
> >> >> +	struct starfive_jh7110_pcie *pcie =
> >> >> +		container_of(plda, struct starfive_jh7110_pcie, plda);
> >> >> +	struct device *dev = plda->dev;
> >> >> +	int ret;
> >> >
> >> > Weird ordering again.
> >> >
> >> >> +
> >> >> +	ret = starfive_pcie_enable_phy(dev, plda);
> >> >> +	if (ret)
> >> >> +		return ret;
> >> >> +
> >> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_rp_nep,
> >> >> +			   STG_SYSCON_K_RP_NEP, STG_SYSCON_K_RP_NEP);
> >> >> +
> >> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
> >> >> +			   STG_SYSCON_CKREF_SRC_MASK,
> >> >> +			   FIELD_PREP(STG_SYSCON_CKREF_SRC_MASK, 2));
> >> >> +
> >> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
> >> >> +			   STG_SYSCON_CLKREQ, STG_SYSCON_CLKREQ);
> >> >> +
> >> >> +	ret = starfive_pcie_clk_rst_init(pcie);
> >> >> +	if (ret)
> >> >> +		return ret;
> >> >> +
> >> >> +	if (pcie->power_gpio)
> >> >> +		gpiod_set_value_cansleep(pcie->power_gpio, 1);
> >> >> +
> >> >> +	if (pcie->reset_gpio)
> >> >> +		gpiod_set_value_cansleep(pcie->reset_gpio, 1);
> >> >> +
> >> >> +	/* Disable physical functions except #0 */
> >> >> +	for (i = 1; i < PCIE_FUNC_NUM; i++) {
> >> >> +		regmap_update_bits(pcie->reg_syscon,
> >> >> +				   pcie->stg_arfun,
> >> >> +				   STG_SYSCON_AXI4_SLVL_ARFUNC_MASK,
> >> >> +				   STG_SYSCON_AXI4_SLVL_PHY_ARFUNC(i));
> >> >> +
> >> >> +		regmap_update_bits(pcie->reg_syscon,
> >> >> +				   pcie->stg_awfun,
> >> >> +				   STG_SYSCON_AXI4_SLVL_AWFUNC_MASK,
> >> >> +				   STG_SYSCON_AXI4_SLVL_PHY_AWFUNC(i));
> >> >> +
> >> >> +		plda_pcie_disable_func(plda);
> >> >> +	}
> >> >> +
> >> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_arfun,
> >> >> +			   STG_SYSCON_AXI4_SLVL_ARFUNC_MASK, 0);
> >> >> +	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
> >> >> +			   STG_SYSCON_AXI4_SLVL_AWFUNC_MASK, 0);
> >> >> +
> >> >> +	plda_pcie_enable_root_port(plda);
> >> >> +	plda_pcie_write_rc_bar(plda, 0);
> >> >> +
> >> >> +	/* PCIe PCI Standard Configuration Identification Settings. */
> >> >> +	plda_pcie_set_standard_class(plda);
> >> >> +
> >> >> +	/*
> >> >> +	 * The LTR message forwarding of PCIe Message Reception was set by core
> >> >> +	 * as default, but the forward id & addr are also need to be reset.
> >> >> +	 * If we do not disable LTR message forwarding here, or set a legal
> >> >> +	 * forwarding address, the kernel will get stuck after this driver probe.
> >> >> +	 * To workaround, disable the LTR message forwarding support on
> >> >> +	 * PCIe Message Reception.
> >> >> +	 */
> >> >> +	plda_pcie_disable_ltr(plda);
> >> >> +
> >> >> +	/* Prefetchable memory window 64-bit addressing support */
> >> >> +	plda_pcie_set_pref_win_64bit(plda);
> >> >> +
> >> >> +	/* Ensure that PERST has been asserted for at least 100 ms,
> >> >> +	 * the sleep value is T_PVPERL from PCIe CEM spec r2.0 (Table 2-4)
> >> >> +	 */
> >> >> +	msleep(100);
> >> >> +	if (pcie->reset_gpio)
> >> >> +		gpiod_set_value_cansleep(pcie->reset_gpio, 0);
> >> >> +
> >> >> +	/* As the requirement in PCIe base spec r6.0, system (<=5GT/s) must
> >> >> +	 * wait a minimum of 100 ms following exit from a conventional reset
> >> >> +	 * before sending a configuration request to the device.
> >> >> +	 */
> >> >> +	msleep(100);
> >> >> +
> >> >> +	if (starfive_pcie_host_wait_for_link(pcie))
> >> >> +		dev_info(dev, "port link down\n");
> >> >> +
> >> >> +	return ret;
> >> >> +}
> >> >> +
> >> >> +static const struct plda_pcie_host_ops sf_host_ops = {
> >> >> +	.host_init = starfive_pcie_host_init,
> >> >> +	.host_deinit = starfive_pcie_host_deinit,
> >> >> +};
> >> >> +
> >> >> +static int starfive_pcie_probe(struct platform_device *pdev)
> >> >> +{
> >> >> +	struct device *dev = &pdev->dev;
> >> >> +	struct starfive_jh7110_pcie *pcie;
> >> >> +	struct plda_pcie_rp *plda;
> >> >> +	int ret;
> >> >> +
> >> >> +	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> >> >> +	if (!pcie)
> >> >> +		return -ENOMEM;
> >> >> +
> >> >> +	plda = &pcie->plda;
> >> >> +	plda->dev = dev;
> >> >> +
> >> >> +	ret = starfive_pcie_parse_dt(pcie, dev);
> >> >> +	if (ret)
> >> >> +		return ret;
> >> >> +
> >> >> +	plda->host_ops = &sf_host_ops;
> >> >> +	plda->num_events = NUM_PLDA_EVENTS;
> >> >> +	ret = plda_pcie_host_init(&pcie->plda, &starfive_pcie_ops);
> >> >> +	if (ret)
> >> >> +		return ret;
> >> >> +
> >> >> +	pm_runtime_enable(&pdev->dev);
> >> >> +	pm_runtime_get_sync(&pdev->dev);
> >> >> +	platform_set_drvdata(pdev, pcie);
> >> >> +
> >> >> +	return 0;
> >> >> +}
> >> >> +
> >> >> +static void starfive_pcie_remove(struct platform_device *pdev)
> >> >> +{
> >> >> +	struct starfive_jh7110_pcie *pcie = platform_get_drvdata(pdev);
> >> >> +
> >> >> +	plda_pcie_host_deinit(&pcie->plda);
> >> >> +	platform_set_drvdata(pdev, NULL);
> >> >> +}
> >> >> +
> >> >> +static int starfive_pcie_suspend_noirq(struct device *dev)
> >> >> +{
> >> >> +	struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
> >> >> +
> >> >> +	if (!pcie)
> >> >> +		return 0;
> >> >> +
> >> >> +	clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> >> >> +	starfive_pcie_disable_phy(&pcie->plda);
> >> >> +
> >> >> +	return 0;
> >> >> +}
> >> >> +
> >> >> +static int starfive_pcie_resume_noirq(struct device *dev)
> >> >> +{
> >> >> +	struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
> >> >> +	int ret;
> >> >> +
> >> >> +	ret = starfive_pcie_enable_phy(dev, &pcie->plda);
> >> >> +	if (ret)
> >> >> +		return ret;
> >> >> +
> >> >> +	ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
> >> >> +	if (ret) {
> >> >> +		dev_err(dev, "failed to enable clocks\n");
> >> >> +		starfive_pcie_disable_phy(&pcie->plda);
> >> >> +		return ret;
> >> >> +	}
> >> >> +
> >> >> +	return ret;
> >> >> +}
> >> >> +
> >> >> +static const struct dev_pm_ops starfive_pcie_pm_ops = {
> >> >> +	NOIRQ_SYSTEM_SLEEP_PM_OPS(starfive_pcie_suspend_noirq,
> >> >> +				  starfive_pcie_resume_noirq)
> >> >> +};
> >> >> +
> >> >> +static const struct of_device_id starfive_pcie_of_match[] = {
> >> >> +	{ .compatible = "starfive,jh7110-pcie"},
> >> >
> >> > Missing space before }
> >> >
> >> >> +	{ /* sentinel */ }
> >> >> +};
> >> >> +MODULE_DEVICE_TABLE(of, starfive_pcie_of_match);
> >> >> +
> >> >> +static struct platform_driver starfive_pcie_driver = {
> >> >> +	.driver = {
> >> >> +		.name = "pcie-starfive",
> >> >> +		.of_match_table = of_match_ptr(starfive_pcie_of_match),
> >> >> +#ifdef CONFIG_PM_SLEEP
> >> >> +		.pm = &starfive_pcie_pm_ops,
> >> >> +#endif
> >> >
> >> > This can be just .pm = pm_sleep_ptr(&starfive_pcie_pm_ops),
> >> >
> >> OK
> >> >> +	},
> >> >> +	.probe = starfive_pcie_probe,
> >> >> +	.remove_new = starfive_pcie_remove,
> >> >> +};
> >> >> +module_platform_driver(starfive_pcie_driver);
> >> >> +
> >> >> +MODULE_DESCRIPTION("StarFive JH7110 PCIe host driver");
> >> >> +MODULE_LICENSE("GPL v2");
> >> >> --
> >> >> 2.17.1
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
  

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index ebdb65e195ee..4632cd411a3d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16679,6 +16679,13 @@  S:	Maintained
 F:	Documentation/devicetree/bindings/pci/socionext,uniphier-pcie*
 F:	drivers/pci/controller/dwc/pcie-uniphier*
 
+PCIE DRIVER FOR STARFIVE JH71x0
+M:	Kevin Xie <kevin.xie@starfivetech.com>
+L:	linux-pci@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/starfive*
+F:	drivers/pci/controller/plda/pcie-starfive.c
+
 PCIE DRIVER FOR ST SPEAR13XX
 M:	Pratyush Anand <pratyush.anand@gmail.com>
 L:	linux-pci@vger.kernel.org
diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
index e54a82ee94f5..8de661730aa5 100644
--- a/drivers/pci/controller/plda/Kconfig
+++ b/drivers/pci/controller/plda/Kconfig
@@ -15,4 +15,16 @@  config PCIE_MICROCHIP_HOST
 	  Say Y here if you want kernel to support the Microchip AXI PCIe
 	  Host Bridge driver.
 
+config PCIE_STARFIVE_HOST
+	tristate "StarFive PCIe host controller"
+	depends on OF && PCI_MSI
+	select PCIE_PLDA_HOST
+	help
+	  Say Y here if you want to support the StarFive PCIe controller
+	  in host mode. StarFive PCIe controller uses PLDA PCIe
+	  core.
+	  If you choose to build this driver as module it will
+	  be dynamically linked and module will be called
+	  pcie-starfive.ko
+
 endmenu
diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
index 4340ab007f44..0ac6851bed48 100644
--- a/drivers/pci/controller/plda/Makefile
+++ b/drivers/pci/controller/plda/Makefile
@@ -1,3 +1,4 @@ 
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
 obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
+obj-$(CONFIG_PCIE_STARFIVE_HOST) += pcie-starfive.o
diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
index 26e6cfd2eaba..8b32df477ad8 100644
--- a/drivers/pci/controller/plda/pcie-plda-host.c
+++ b/drivers/pci/controller/plda/pcie-plda-host.c
@@ -20,6 +20,15 @@ 
 
 #include "pcie-plda.h"
 
+void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
+				int where)
+{
+	struct plda_pcie_rp *pcie = bus->sysdata;
+
+	return pcie->config_base + PCIE_ECAM_OFFSET(bus->number, devfn, where);
+}
+EXPORT_SYMBOL_GPL(plda_pcie_map_bus);
+
 static void plda_handle_msi(struct irq_desc *desc)
 {
 	struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
@@ -370,6 +379,12 @@  static const struct plda_event_ops plda_event_ops = {
 	.get_events = plda_get_events,
 };
 
+static const struct plda_event plda_default_event = {
+	.event_ops		= &plda_event_ops,
+	.intx_event		= EVENT_PM_MSI_INT_INTX,
+	.msi_event		= EVENT_PM_MSI_INT_MSI
+};
+
 static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port,
 				      const struct irq_domain_ops *ops)
 {
@@ -416,7 +431,6 @@  int plda_init_interrupts(struct platform_device *pdev,
 			 const struct plda_event *event)
 {
 	struct device *dev = &pdev->dev;
-	int irq;
 	int i, intx_irq, msi_irq, event_irq;
 	int ret;
 	const struct irq_domain_ops *irq_dom_ops;
@@ -434,8 +448,8 @@  int plda_init_interrupts(struct platform_device *pdev,
 		return ret;
 	}
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
+	port->irq = platform_get_irq(pdev, 0);
+	if (port->irq < 0)
 		return -ENODEV;
 
 	port->event_ops = event->event_ops;
@@ -465,6 +479,7 @@  int plda_init_interrupts(struct platform_device *pdev,
 		dev_err(dev, "failed to map INTx interrupt\n");
 		return -ENXIO;
 	}
+	port->intx_irq = intx_irq;
 
 	/* Plug the INTx chained handler */
 	irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
@@ -473,12 +488,13 @@  int plda_init_interrupts(struct platform_device *pdev,
 				     event->msi_event);
 	if (!msi_irq)
 		return -ENXIO;
+	port->msi_irq = msi_irq;
 
 	/* Plug the MSI chained handler */
 	irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
 
 	/* Plug the main event chained handler */
-	irq_set_chained_handler_and_data(irq, plda_handle_event, port);
+	irq_set_chained_handler_and_data(port->irq, plda_handle_event, port);
 
 	return 0;
 }
@@ -544,3 +560,100 @@  int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
 	return 0;
 }
 EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
+
+static void plda_pcie_irq_domain_deinit(struct plda_pcie_rp *pcie)
+{
+	irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
+	irq_set_chained_handler_and_data(pcie->msi_irq, NULL, NULL);
+	irq_set_chained_handler_and_data(pcie->intx_irq, NULL, NULL);
+
+	irq_domain_remove(pcie->msi.msi_domain);
+	irq_domain_remove(pcie->msi.dev_domain);
+
+	irq_domain_remove(pcie->intx_domain);
+	irq_domain_remove(pcie->event_domain);
+}
+
+int plda_pcie_host_init(struct plda_pcie_rp *port, struct pci_ops *ops)
+{
+	struct resource *cfg_res;
+	struct device *dev = port->dev;
+	int ret;
+	struct pci_host_bridge *bridge;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	port->bridge_addr =
+		devm_platform_ioremap_resource_byname(pdev, "apb");
+
+	if (IS_ERR(port->bridge_addr))
+		return dev_err_probe(dev, PTR_ERR(port->bridge_addr),
+				     "failed to map reg memory\n");
+
+	cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
+	if (!cfg_res)
+		return dev_err_probe(dev, -ENODEV,
+				     "failed to get config memory\n");
+
+	port->config_base = devm_ioremap_resource(dev, cfg_res);
+	if (IS_ERR(port->config_base))
+		return dev_err_probe(dev, PTR_ERR(port->config_base),
+				     "failed to map config memory\n");
+
+	port->phy = devm_phy_optional_get(dev, NULL);
+	if (IS_ERR(port->phy))
+		return dev_err_probe(dev, PTR_ERR(port->phy),
+				     "failed to get pcie phy\n");
+
+	bridge = devm_pci_alloc_host_bridge(dev, 0);
+	if (!bridge)
+		return dev_err_probe(dev, -ENOMEM,
+				     "failed to alloc bridge\n");
+
+	if (port->host_ops && port->host_ops->host_init) {
+		ret = port->host_ops->host_init(port);
+		if (ret)
+			return ret;
+	}
+
+	port->bridge = bridge;
+	plda_pcie_setup_window(port->bridge_addr, 0, cfg_res->start, 0,
+			       resource_size(cfg_res));
+	plda_pcie_setup_iomems(bridge, port);
+	plda_set_default_msi(&port->msi);
+	ret = plda_init_interrupts(pdev, port, &plda_default_event);
+	if (ret)
+		goto err_host;
+
+	/* Set default bus ops */
+	bridge->ops = ops;
+	bridge->sysdata = port;
+
+	ret = pci_host_probe(bridge);
+	if (ret < 0) {
+		dev_err(dev, "failed to pci host probe: %d\n", ret);
+		goto err_probe;
+	}
+
+	return ret;
+
+err_probe:
+	plda_pcie_irq_domain_deinit(port);
+err_host:
+	if (port->host_ops && port->host_ops->host_deinit)
+		port->host_ops->host_deinit(port);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(plda_pcie_host_init);
+
+void plda_pcie_host_deinit(struct plda_pcie_rp *port)
+{
+	pci_stop_root_bus(port->bridge->bus);
+	pci_remove_root_bus(port->bridge->bus);
+
+	plda_pcie_irq_domain_deinit(port);
+
+	if (port->host_ops && port->host_ops->host_deinit)
+		port->host_ops->host_deinit(port);
+}
+EXPORT_SYMBOL_GPL(plda_pcie_host_deinit);
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index b7420598a326..e571047d7944 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -6,14 +6,24 @@ 
 #ifndef _PCIE_PLDA_H
 #define _PCIE_PLDA_H
 
+#include <linux/phy/phy.h>
+
 /* Number of MSI IRQs */
 #define PLDA_MAX_NUM_MSI_IRQS			32
 
 /* PCIe Bridge Phy Regs */
+#define GEN_SETTINGS				0x80
+#define  RP_ENABLE				1
+#define PCIE_PCI_IDS_DW1			0x9c
+#define  IDS_CLASS_CODE_SHIFT			16
 #define PCIE_PCI_IRQ_DW0			0xa8
 #define  MSIX_CAP_MASK				BIT(31)
 #define  NUM_MSI_MSGS_MASK			GENMASK(6, 4)
 #define  NUM_MSI_MSGS_SHIFT			4
+#define PCI_MISC				0xb4
+#define  PHY_FUNCTION_DIS			BIT(15)
+#define PCIE_WINROM				0xfc
+#define  PREF_MEM_WIN_64_SUPPORT		BIT(3)
 
 #define IMASK_LOCAL				0x180
 #define  DMA_END_ENGINE_0_MASK			0x00000000u
@@ -64,6 +74,8 @@ 
 #define ISTATUS_HOST				0x18c
 #define IMSI_ADDR				0x190
 #define ISTATUS_MSI				0x194
+#define PMSG_SUPPORT_RX				0x3f0
+#define  PMSG_LTR_SUPPORT			BIT(2)
 
 /* PCIe Master table init defines */
 #define ATR0_PCIE_WIN0_SRCADDR_PARAM		0x600u
@@ -85,6 +97,8 @@ 
 #define  PCIE_TX_RX_INTERFACE			0x00000000u
 #define  PCIE_CONFIG_INTERFACE			0x00000001u
 
+#define CONFIG_SPACE_ADDR			0x1000u
+
 #define ATR_ENTRY_SIZE				32
 
 #define EVENT_A_ATR_EVT_POST_ERR		0
@@ -134,6 +148,11 @@  struct plda_event_ops {
 	u32 (*get_events)(struct plda_pcie_rp *pcie);
 };
 
+struct plda_pcie_host_ops {
+	int (*host_init)(struct plda_pcie_rp *pcie);
+	void (*host_deinit)(struct plda_pcie_rp *pcie);
+};
+
 struct plda_msi {
 	struct mutex lock;		/* Protect used bitmap */
 	struct irq_domain *msi_domain;
@@ -145,12 +164,19 @@  struct plda_msi {
 
 struct plda_pcie_rp {
 	struct device *dev;
+	struct pci_host_bridge *bridge;
 	struct irq_domain *intx_domain;
 	struct irq_domain *event_domain;
 	raw_spinlock_t lock;
 	struct plda_msi msi;
 	const struct plda_event_ops *event_ops;
+	const struct plda_pcie_host_ops *host_ops;
+	struct phy *phy;
 	void __iomem *bridge_addr;
+	void __iomem *config_base;
+	int irq;
+	int msi_irq;
+	int intx_irq;
 	int num_events;
 };
 
@@ -163,6 +189,7 @@  struct plda_event {
 	int msi_event;
 };
 
+void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn, int where);
 int plda_init_interrupts(struct platform_device *pdev,
 			 struct plda_pcie_rp *port,
 			 const struct plda_event *event);
@@ -171,4 +198,66 @@  void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
 			    size_t size);
 int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
 			   struct plda_pcie_rp *port);
-#endif
+int plda_pcie_host_init(struct plda_pcie_rp *pcie, struct pci_ops *ops);
+void plda_pcie_host_deinit(struct plda_pcie_rp *pcie);
+
+static inline void plda_set_default_msi(struct plda_msi *msi)
+{
+	msi->vector_phy = IMSI_ADDR;
+	msi->num_vectors = PLDA_MAX_NUM_MSI_IRQS;
+}
+
+static inline void plda_pcie_enable_root_port(struct plda_pcie_rp *plda)
+{
+	u32 value;
+
+	value = readl_relaxed(plda->bridge_addr + GEN_SETTINGS);
+	value |= RP_ENABLE;
+	writel_relaxed(value, plda->bridge_addr + GEN_SETTINGS);
+}
+
+static inline void plda_pcie_set_standard_class(struct plda_pcie_rp *plda)
+{
+	u32 value;
+
+	value = readl_relaxed(plda->bridge_addr + PCIE_PCI_IDS_DW1);
+	value &= 0xff;
+	value |= (PCI_CLASS_BRIDGE_PCI << IDS_CLASS_CODE_SHIFT);
+	writel_relaxed(value, plda->bridge_addr + PCIE_PCI_IDS_DW1);
+}
+
+static inline void plda_pcie_set_pref_win_64bit(struct plda_pcie_rp *plda)
+{
+	u32 value;
+
+	value = readl_relaxed(plda->bridge_addr + PCIE_WINROM);
+	value |= PREF_MEM_WIN_64_SUPPORT;
+	writel_relaxed(value, plda->bridge_addr + PCIE_WINROM);
+}
+
+static inline void plda_pcie_disable_ltr(struct plda_pcie_rp *plda)
+{
+	u32 value;
+
+	value = readl_relaxed(plda->bridge_addr + PMSG_SUPPORT_RX);
+	value &= ~PMSG_LTR_SUPPORT;
+	writel_relaxed(value, plda->bridge_addr + PMSG_SUPPORT_RX);
+}
+
+static inline void plda_pcie_disable_func(struct plda_pcie_rp *plda)
+{
+	u32 value;
+
+	value = readl_relaxed(plda->bridge_addr + PCI_MISC);
+	value |= PHY_FUNCTION_DIS;
+	writel_relaxed(value, plda->bridge_addr + PCI_MISC);
+}
+
+static inline void plda_pcie_write_rc_bar(struct plda_pcie_rp *plda, u64 val)
+{
+	void __iomem *addr = plda->bridge_addr + CONFIG_SPACE_ADDR;
+
+	writel_relaxed(val & 0xffffffff, addr + PCI_BASE_ADDRESS_0);
+	writel_relaxed(val >> 32, addr + PCI_BASE_ADDRESS_1);
+}
+#endif /* _PCIE_PLDA_H */
diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
new file mode 100644
index 000000000000..42099fef0d7d
--- /dev/null
+++ b/drivers/pci/controller/plda/pcie-starfive.c
@@ -0,0 +1,461 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * PCIe host controller driver for StarFive JH7110 Soc.
+ *
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include "../../pci.h"
+
+#include "pcie-plda.h"
+
+#define PCIE_FUNC_NUM			4
+
+/* system control */
+#define STG_SYSCON_PCIE0_BASE			0x48
+#define STG_SYSCON_PCIE1_BASE			0x1f8
+
+#define STG_SYSCON_ARFUNC_OFFSET		0x78
+#define STG_SYSCON_AXI4_SLVL_ARFUNC_MASK	 GENMASK(22, 8)
+#define STG_SYSCON_AXI4_SLVL_PHY_ARFUNC(x)	 FIELD_PREP(GENMASK(20, 17), x)
+#define STG_SYSCON_AWFUNC_OFFSET		0x7c
+#define STG_SYSCON_AXI4_SLVL_AWFUNC_MASK	 GENMASK(14, 0)
+#define STG_SYSCON_AXI4_SLVL_PHY_AWFUNC(x)	 FIELD_PREP(GENMASK(12, 9), x)
+#define STG_SYSCON_CLKREQ			 BIT(22)
+#define STG_SYSCON_CKREF_SRC_MASK		 GENMASK(19, 18)
+#define STG_SYSCON_RP_NEP_OFFSET		0xe8
+#define STG_SYSCON_K_RP_NEP			 BIT(8)
+#define STG_SYSCON_LNKSTA_OFFSET		0x170
+#define DATA_LINK_ACTIVE			 BIT(5)
+
+/* Parameters for the waiting for link up routine */
+#define LINK_WAIT_MAX_RETRIES	10
+#define LINK_WAIT_USLEEP_MIN	90000
+#define LINK_WAIT_USLEEP_MAX	100000
+
+struct starfive_jh7110_pcie {
+	struct plda_pcie_rp plda;
+	struct reset_control *resets;
+	struct clk_bulk_data *clks;
+	struct regmap *reg_syscon;
+	struct gpio_desc *power_gpio;
+	struct gpio_desc *reset_gpio;
+
+	u32 stg_arfun;
+	u32 stg_awfun;
+	u32 stg_rp_nep;
+	u32 stg_lnksta;
+
+	int num_clks;
+};
+
+/*
+ * The BAR0/1 of bridge should be hidden during enumeration to
+ * avoid the sizing and resource allocation by PCIe core.
+ */
+static bool starfive_pcie_hide_rc_bar(struct pci_bus *bus, unsigned int  devfn,
+				      int offset)
+{
+	if (pci_is_root_bus(bus) && !devfn &&
+	    (offset == PCI_BASE_ADDRESS_0 || offset == PCI_BASE_ADDRESS_1))
+		return true;
+
+	return false;
+}
+
+static int starfive_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
+				      int where, int size, u32 value)
+{
+	if (starfive_pcie_hide_rc_bar(bus, devfn, where))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	return pci_generic_config_write(bus, devfn, where, size, value);
+}
+
+static int starfive_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
+				     int where, int size, u32 *value)
+{
+	if (starfive_pcie_hide_rc_bar(bus, devfn, where))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	return pci_generic_config_read(bus, devfn, where, size, value);
+}
+
+static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie, struct device *dev)
+{
+	int domain_nr, stg_pcie_base;
+
+	pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
+	if (pcie->num_clks < 0)
+		return dev_err_probe(dev, -ENODEV,
+			"failed to get pcie clocks\n");
+
+	pcie->resets = devm_reset_control_array_get_exclusive(dev);
+	if (IS_ERR(pcie->resets))
+		return dev_err_probe(dev, PTR_ERR(pcie->resets),
+			"failed to get pcie resets");
+
+	pcie->reg_syscon =
+		syscon_regmap_lookup_by_phandle(dev->of_node,
+						"starfive,stg-syscon");
+
+	if (IS_ERR(pcie->reg_syscon))
+		return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
+			"failed to parse starfive,stg-syscon\n");
+
+	domain_nr = of_get_pci_domain_nr(dev->of_node);
+
+	if (domain_nr < 0 || domain_nr > 1)
+		return dev_err_probe(dev, -ENODEV,
+			"failed to get valid pcie id\n");
+
+	if (domain_nr == 0)
+		stg_pcie_base = STG_SYSCON_PCIE0_BASE;
+	else
+		stg_pcie_base = STG_SYSCON_PCIE1_BASE;
+
+	pcie->stg_arfun = stg_pcie_base + STG_SYSCON_ARFUNC_OFFSET;
+	pcie->stg_awfun = stg_pcie_base + STG_SYSCON_AWFUNC_OFFSET;
+	pcie->stg_rp_nep = stg_pcie_base + STG_SYSCON_RP_NEP_OFFSET;
+	pcie->stg_lnksta = stg_pcie_base + STG_SYSCON_LNKSTA_OFFSET;
+
+	pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
+	if (IS_ERR(pcie->reset_gpio)) {
+		dev_warn(dev, "failed to get perst-gpio\n");
+		return -EINVAL;
+	}
+
+	pcie->power_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(pcie->power_gpio)) {
+		dev_warn(dev, "failed to get power-gpio\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct pci_ops starfive_pcie_ops = {
+	.map_bus	= plda_pcie_map_bus,
+	.read           = starfive_pcie_config_read,
+	.write          = starfive_pcie_config_write,
+};
+
+static int starfive_pcie_clk_rst_init(struct starfive_jh7110_pcie *pcie)
+{
+	int ret;
+	struct device *dev = pcie->plda.dev;
+
+	ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
+	if (ret) {
+		dev_err(dev, "failed to enable clocks\n");
+		return ret;
+	}
+
+	ret = reset_control_deassert(pcie->resets);
+	if (ret) {
+		clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
+		dev_err(dev, "failed to resets\n");
+	}
+
+	return ret;
+}
+
+static void starfive_pcie_clk_rst_deinit(struct starfive_jh7110_pcie *pcie)
+{
+	reset_control_assert(pcie->resets);
+	clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
+}
+
+static bool starfive_pcie_link_up(struct plda_pcie_rp *plda)
+{
+	struct starfive_jh7110_pcie *pcie =
+		container_of(plda, struct starfive_jh7110_pcie, plda);
+	struct device *dev = pcie->plda.dev;
+	int ret;
+	u32 stg_reg_val;
+
+	ret = regmap_read(pcie->reg_syscon, pcie->stg_lnksta, &stg_reg_val);
+	if (ret) {
+		dev_err(dev, "failed to read link status\n");
+		return false;
+	}
+
+	if (stg_reg_val & DATA_LINK_ACTIVE)
+		return true;
+
+	return false;
+}
+
+static int starfive_pcie_host_wait_for_link(struct starfive_jh7110_pcie *pcie)
+{
+	struct device *dev = pcie->plda.dev;
+	int retries;
+
+	/* Check if the link is up or not */
+	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+		if (starfive_pcie_link_up(&pcie->plda)) {
+			dev_info(dev, "port link up\n");
+			return 0;
+		}
+		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int starfive_pcie_enable_phy(struct device *dev, struct plda_pcie_rp *pcie)
+{
+	int ret;
+
+	if (!pcie->phy)
+		return 0;
+
+	ret = phy_init(pcie->phy);
+	if (ret)
+		return dev_err_probe(dev, ret,
+			"failed to initialize pcie phy\n");
+
+	ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
+	if (ret) {
+		dev_err(dev, "failed to set pcie mode\n");
+		goto err_phy_on;
+	}
+
+	ret = phy_power_on(pcie->phy);
+	if (ret) {
+		dev_err(dev, "failed to power on pcie phy\n");
+		goto err_phy_on;
+	}
+
+	return 0;
+
+err_phy_on:
+	phy_exit(pcie->phy);
+	return ret;
+}
+
+static void starfive_pcie_disable_phy(struct plda_pcie_rp *pcie)
+{
+	phy_power_off(pcie->phy);
+	phy_exit(pcie->phy);
+}
+
+static void starfive_pcie_host_deinit(struct plda_pcie_rp *plda)
+{
+	struct starfive_jh7110_pcie *pcie =
+		container_of(plda, struct starfive_jh7110_pcie, plda);
+
+	starfive_pcie_clk_rst_deinit(pcie);
+	if (pcie->power_gpio)
+		gpiod_set_value_cansleep(pcie->power_gpio, 0);
+	starfive_pcie_disable_phy(plda);
+}
+
+static int starfive_pcie_host_init(struct plda_pcie_rp *plda)
+{
+	int i;
+	struct starfive_jh7110_pcie *pcie =
+		container_of(plda, struct starfive_jh7110_pcie, plda);
+	struct device *dev = plda->dev;
+	int ret;
+
+	ret = starfive_pcie_enable_phy(dev, plda);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(pcie->reg_syscon, pcie->stg_rp_nep,
+			   STG_SYSCON_K_RP_NEP, STG_SYSCON_K_RP_NEP);
+
+	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
+			   STG_SYSCON_CKREF_SRC_MASK,
+			   FIELD_PREP(STG_SYSCON_CKREF_SRC_MASK, 2));
+
+	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
+			   STG_SYSCON_CLKREQ, STG_SYSCON_CLKREQ);
+
+	ret = starfive_pcie_clk_rst_init(pcie);
+	if (ret)
+		return ret;
+
+	if (pcie->power_gpio)
+		gpiod_set_value_cansleep(pcie->power_gpio, 1);
+
+	if (pcie->reset_gpio)
+		gpiod_set_value_cansleep(pcie->reset_gpio, 1);
+
+	/* Disable physical functions except #0 */
+	for (i = 1; i < PCIE_FUNC_NUM; i++) {
+		regmap_update_bits(pcie->reg_syscon,
+				   pcie->stg_arfun,
+				   STG_SYSCON_AXI4_SLVL_ARFUNC_MASK,
+				   STG_SYSCON_AXI4_SLVL_PHY_ARFUNC(i));
+
+		regmap_update_bits(pcie->reg_syscon,
+				   pcie->stg_awfun,
+				   STG_SYSCON_AXI4_SLVL_AWFUNC_MASK,
+				   STG_SYSCON_AXI4_SLVL_PHY_AWFUNC(i));
+
+		plda_pcie_disable_func(plda);
+	}
+
+	regmap_update_bits(pcie->reg_syscon, pcie->stg_arfun,
+			   STG_SYSCON_AXI4_SLVL_ARFUNC_MASK, 0);
+	regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
+			   STG_SYSCON_AXI4_SLVL_AWFUNC_MASK, 0);
+
+	plda_pcie_enable_root_port(plda);
+	plda_pcie_write_rc_bar(plda, 0);
+
+	/* PCIe PCI Standard Configuration Identification Settings. */
+	plda_pcie_set_standard_class(plda);
+
+	/*
+	 * The LTR message forwarding of PCIe Message Reception was set by core
+	 * as default, but the forward id & addr are also need to be reset.
+	 * If we do not disable LTR message forwarding here, or set a legal
+	 * forwarding address, the kernel will get stuck after this driver probe.
+	 * To workaround, disable the LTR message forwarding support on
+	 * PCIe Message Reception.
+	 */
+	plda_pcie_disable_ltr(plda);
+
+	/* Prefetchable memory window 64-bit addressing support */
+	plda_pcie_set_pref_win_64bit(plda);
+
+	/* Ensure that PERST has been asserted for at least 100 ms,
+	 * the sleep value is T_PVPERL from PCIe CEM spec r2.0 (Table 2-4)
+	 */
+	msleep(100);
+	if (pcie->reset_gpio)
+		gpiod_set_value_cansleep(pcie->reset_gpio, 0);
+
+	/* As the requirement in PCIe base spec r6.0, system (<=5GT/s) must
+	 * wait a minimum of 100 ms following exit from a conventional reset
+	 * before sending a configuration request to the device.
+	 */
+	msleep(100);
+
+	if (starfive_pcie_host_wait_for_link(pcie))
+		dev_info(dev, "port link down\n");
+
+	return ret;
+}
+
+static const struct plda_pcie_host_ops sf_host_ops = {
+	.host_init = starfive_pcie_host_init,
+	.host_deinit = starfive_pcie_host_deinit,
+};
+
+static int starfive_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct starfive_jh7110_pcie *pcie;
+	struct plda_pcie_rp *plda;
+	int ret;
+
+	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+	if (!pcie)
+		return -ENOMEM;
+
+	plda = &pcie->plda;
+	plda->dev = dev;
+
+	ret = starfive_pcie_parse_dt(pcie, dev);
+	if (ret)
+		return ret;
+
+	plda->host_ops = &sf_host_ops;
+	plda->num_events = NUM_PLDA_EVENTS;
+	ret = plda_pcie_host_init(&pcie->plda, &starfive_pcie_ops);
+	if (ret)
+		return ret;
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+	platform_set_drvdata(pdev, pcie);
+
+	return 0;
+}
+
+static void starfive_pcie_remove(struct platform_device *pdev)
+{
+	struct starfive_jh7110_pcie *pcie = platform_get_drvdata(pdev);
+
+	plda_pcie_host_deinit(&pcie->plda);
+	platform_set_drvdata(pdev, NULL);
+}
+
+static int starfive_pcie_suspend_noirq(struct device *dev)
+{
+	struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
+
+	if (!pcie)
+		return 0;
+
+	clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
+	starfive_pcie_disable_phy(&pcie->plda);
+
+	return 0;
+}
+
+static int starfive_pcie_resume_noirq(struct device *dev)
+{
+	struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
+	int ret;
+
+	ret = starfive_pcie_enable_phy(dev, &pcie->plda);
+	if (ret)
+		return ret;
+
+	ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
+	if (ret) {
+		dev_err(dev, "failed to enable clocks\n");
+		starfive_pcie_disable_phy(&pcie->plda);
+		return ret;
+	}
+
+	return ret;
+}
+
+static const struct dev_pm_ops starfive_pcie_pm_ops = {
+	NOIRQ_SYSTEM_SLEEP_PM_OPS(starfive_pcie_suspend_noirq,
+				  starfive_pcie_resume_noirq)
+};
+
+static const struct of_device_id starfive_pcie_of_match[] = {
+	{ .compatible = "starfive,jh7110-pcie"},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, starfive_pcie_of_match);
+
+static struct platform_driver starfive_pcie_driver = {
+	.driver = {
+		.name = "pcie-starfive",
+		.of_match_table = of_match_ptr(starfive_pcie_of_match),
+#ifdef CONFIG_PM_SLEEP
+		.pm = &starfive_pcie_pm_ops,
+#endif
+	},
+	.probe = starfive_pcie_probe,
+	.remove_new = starfive_pcie_remove,
+};
+module_platform_driver(starfive_pcie_driver);
+
+MODULE_DESCRIPTION("StarFive JH7110 PCIe host driver");
+MODULE_LICENSE("GPL v2");