[v6,19/19] riscv: dts: starfive: add PCIe dts configuration for JH7110

Message ID 20230915102243.59775-20-minda.chen@starfivetech.com
State New
Headers
Series Refactoring Microchip PCIe driver and add StarFive PCIe |

Commit Message

Minda Chen Sept. 15, 2023, 10:22 a.m. UTC
  Add PCIe dts configuraion for JH7110 SoC platform.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
---
 .../jh7110-starfive-visionfive-2.dtsi         | 63 +++++++++++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      | 88 +++++++++++++++++++
 2 files changed, 151 insertions(+)
  

Comments

Conor Dooley Sept. 16, 2023, 12:07 a.m. UTC | #1
On Fri, Sep 15, 2023 at 06:22:43PM +0800, Minda Chen wrote:
> Add PCIe dts configuraion for JH7110 SoC platform.
> 
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>

Not really important, but checkpatch whinges about the double signoff
here, since both are you"
  
Minda Chen Sept. 17, 2023, 8:49 a.m. UTC | #2
On 2023/9/16 8:07, Conor Dooley wrote:
> On Fri, Sep 15, 2023 at 06:22:43PM +0800, Minda Chen wrote:
>> Add PCIe dts configuraion for JH7110 SoC platform.
>> 
>> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
>> Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
>> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> 
> Not really important, but checkpatch whinges about the double signoff
> here, since both are you"
Thanks. I don't check this carefully.
  
Emil Renner Berthing Sept. 17, 2023, 10:20 p.m. UTC | #3
Minda Chen wrote:
> Add PCIe dts configuraion for JH7110 SoC platform.
>
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> ---
>  .../jh7110-starfive-visionfive-2.dtsi         | 63 +++++++++++++
>  arch/riscv/boot/dts/starfive/jh7110.dtsi      | 88 +++++++++++++++++++
>  2 files changed, 151 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> index d79f94432b27..8c84852f1c06 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> @@ -402,6 +402,53 @@
>  		};
>  	};
>
> +	pcie0_pins: pcie0-0 {
> +		wake-pins {
> +			pinmux = <GPIOMUX(32, GPOUT_LOW,
> +					      GPOEN_DISABLE,
> +					      GPI_NONE)>;
> +			bias-pull-up;
> +			drive-strength = <2>;
> +			input-enable;
> +			input-schmitt-disable;
> +			slew-rate = <0>;
> +		};
> +		clkreq-pins {
> +			pinmux = <GPIOMUX(27, GPOUT_LOW,
> +					      GPOEN_DISABLE,
> +					      GPI_NONE)>;
> +			bias-pull-down;
> +			drive-strength = <2>;
> +			input-enable;
> +			input-schmitt-disable;
> +			slew-rate = <0>;
> +		};
> +	};
> +
> +	pcie1_pins: pcie1-0 {
> +		wake-pins {
> +			pinmux = <GPIOMUX(21, GPOUT_LOW,
> +					      GPOEN_DISABLE,
> +					      GPI_NONE)>;
> +			bias-pull-up;
> +			drive-strength = <2>;
> +			input-enable;
> +			input-schmitt-disable;
> +			slew-rate = <0>;
> +		};
> +
> +		clkreq-pins {
> +			pinmux = <GPIOMUX(29, GPOUT_LOW,
> +					      GPOEN_DISABLE,
> +					      GPI_NONE)>;
> +			bias-pull-down;
> +			drive-strength = <2>;
> +			input-enable;
> +			input-schmitt-disable;
> +			slew-rate = <0>;
> +		};
> +	};
> +
>  	spi0_pins: spi0-0 {
>  		mosi-pins {
>  			pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
> @@ -499,6 +546,22 @@
>  	};
>  };
>
> +&pcie0 {
> +	pinctrl-names = "default";
> +	perst-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>;
> +	pinctrl-0 = <&pcie0_pins>;
> +	phys = <&pciephy0>;
> +	status = "okay";
> +};
> +
> +&pcie1 {
> +	pinctrl-names = "default";
> +	perst-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>;
> +	pinctrl-0 = <&pcie1_pins>;
> +	phys = <&pciephy1>;
> +	status = "okay";
> +};

These nodes are out of place. The order is
- root node
- clocks sorted alphabetically
- other node references sorted alphabetically

>  &tdm {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&tdm_pins>;
> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> index e85464c328d0..97fe5a242d60 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> @@ -1045,5 +1045,93 @@
>  			#reset-cells = <1>;
>  			power-domains = <&pwrc JH7110_PD_VOUT>;
>  		};
> +
> +		pcie0: pcie@940000000 {
> +			compatible = "starfive,jh7110-pcie";
> +			reg = <0x9 0x40000000 0x0 0x1000000>,
> +			      <0x0 0x2b000000 0x0 0x100000>;
> +			reg-names = "cfg", "apb";
> +			linux,pci-domain = <0>;
> +			#address-cells = <3>;
> +			#size-cells = <2>;
> +			#interrupt-cells = <1>;
> +			ranges = <0x82000000  0x0 0x30000000  0x0 0x30000000 0x0 0x08000000>,
> +				 <0xc3000000  0x9 0x00000000  0x9 0x00000000 0x0 0x40000000>;
> +			interrupts = <56>;
> +			interrupt-parent = <&plic>;

Is interrupt-parent not inherited from the soc bus like other peripherals?

> +			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> +			interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>,
> +					<0x0 0x0 0x0 0x2 &pcie_intc0 0x2>,
> +					<0x0 0x0 0x0 0x3 &pcie_intc0 0x3>,
> +					<0x0 0x0 0x0 0x4 &pcie_intc0 0x4>;
> +			msi-controller;
> +			device_type = "pci";
> +			starfive,stg-syscon = <&stg_syscon>;
> +			bus-range = <0x0 0xff>;
> +			clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>,
> +				 <&stgcrg JH7110_STGCLK_PCIE0_TL>,
> +				 <&stgcrg JH7110_STGCLK_PCIE0_AXI_MST0>,
> +				 <&stgcrg JH7110_STGCLK_PCIE0_APB>;
> +			clock-names = "noc", "tl", "axi_mst0", "apb";
> +			resets = <&stgcrg JH7110_STGRST_PCIE0_AXI_MST0>,
> +				 <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV0>,
> +				 <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV>,
> +				 <&stgcrg JH7110_STGRST_PCIE0_BRG>,
> +				 <&stgcrg JH7110_STGRST_PCIE0_CORE>,
> +				 <&stgcrg JH7110_STGRST_PCIE0_APB>;
> +			reset-names = "mst0", "slv0", "slv", "brg",
> +				      "core", "apb";
> +			status = "disabled";
> +
> +			pcie_intc0: interrupt-controller {
> +				#address-cells = <0>;
> +				#interrupt-cells = <1>;
> +				interrupt-controller;
> +			};
> +		};
> +
> +		pcie1: pcie@9c0000000 {
> +			compatible = "starfive,jh7110-pcie";
> +			reg = <0x9 0xc0000000 0x0 0x1000000>,
> +			      <0x0 0x2c000000 0x0 0x100000>;
> +			reg-names = "cfg", "apb";
> +			linux,pci-domain = <1>;
> +			#address-cells = <3>;
> +			#size-cells = <2>;
> +			#interrupt-cells = <1>;
> +			ranges = <0x82000000  0x0 0x38000000  0x0 0x38000000 0x0 0x08000000>,
> +				 <0xc3000000  0x9 0x80000000  0x9 0x80000000 0x0 0x40000000>;
> +			interrupts = <57>;
> +			interrupt-parent = <&plic>;

ditto.

> +			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> +			interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc1 0x1>,
> +					<0x0 0x0 0x0 0x2 &pcie_intc1 0x2>,
> +					<0x0 0x0 0x0 0x3 &pcie_intc1 0x3>,
> +					<0x0 0x0 0x0 0x4 &pcie_intc1 0x4>;
> +			msi-controller;
> +			device_type = "pci";
> +			starfive,stg-syscon = <&stg_syscon>;
> +			bus-range = <0x0 0xff>;
> +			clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>,
> +				 <&stgcrg JH7110_STGCLK_PCIE1_TL>,
> +				 <&stgcrg JH7110_STGCLK_PCIE1_AXI_MST0>,
> +				 <&stgcrg JH7110_STGCLK_PCIE1_APB>;
> +			clock-names = "noc", "tl", "axi_mst0", "apb";
> +			resets = <&stgcrg JH7110_STGRST_PCIE1_AXI_MST0>,
> +				 <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV0>,
> +				 <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV>,
> +				 <&stgcrg JH7110_STGRST_PCIE1_BRG>,
> +				 <&stgcrg JH7110_STGRST_PCIE1_CORE>,
> +				 <&stgcrg JH7110_STGRST_PCIE1_APB>;
> +			reset-names = "mst0", "slv0", "slv", "brg",
> +				      "core", "apb";
> +			status = "disabled";
> +
> +			pcie_intc1: interrupt-controller {
> +				#address-cells = <0>;
> +				#interrupt-cells = <1>;
> +				interrupt-controller;
> +			};
> +		};
>  	};
>  };
> --
> 2.17.1
  

Patch

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index d79f94432b27..8c84852f1c06 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -402,6 +402,53 @@ 
 		};
 	};
 
+	pcie0_pins: pcie0-0 {
+		wake-pins {
+			pinmux = <GPIOMUX(32, GPOUT_LOW,
+					      GPOEN_DISABLE,
+					      GPI_NONE)>;
+			bias-pull-up;
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+		clkreq-pins {
+			pinmux = <GPIOMUX(27, GPOUT_LOW,
+					      GPOEN_DISABLE,
+					      GPI_NONE)>;
+			bias-pull-down;
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+
+	pcie1_pins: pcie1-0 {
+		wake-pins {
+			pinmux = <GPIOMUX(21, GPOUT_LOW,
+					      GPOEN_DISABLE,
+					      GPI_NONE)>;
+			bias-pull-up;
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		clkreq-pins {
+			pinmux = <GPIOMUX(29, GPOUT_LOW,
+					      GPOEN_DISABLE,
+					      GPI_NONE)>;
+			bias-pull-down;
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+
 	spi0_pins: spi0-0 {
 		mosi-pins {
 			pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
@@ -499,6 +546,22 @@ 
 	};
 };
 
+&pcie0 {
+	pinctrl-names = "default";
+	perst-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pcie0_pins>;
+	phys = <&pciephy0>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	perst-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pcie1_pins>;
+	phys = <&pciephy1>;
+	status = "okay";
+};
+
 &tdm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&tdm_pins>;
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index e85464c328d0..97fe5a242d60 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -1045,5 +1045,93 @@ 
 			#reset-cells = <1>;
 			power-domains = <&pwrc JH7110_PD_VOUT>;
 		};
+
+		pcie0: pcie@940000000 {
+			compatible = "starfive,jh7110-pcie";
+			reg = <0x9 0x40000000 0x0 0x1000000>,
+			      <0x0 0x2b000000 0x0 0x100000>;
+			reg-names = "cfg", "apb";
+			linux,pci-domain = <0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x82000000  0x0 0x30000000  0x0 0x30000000 0x0 0x08000000>,
+				 <0xc3000000  0x9 0x00000000  0x9 0x00000000 0x0 0x40000000>;
+			interrupts = <56>;
+			interrupt-parent = <&plic>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>,
+					<0x0 0x0 0x0 0x2 &pcie_intc0 0x2>,
+					<0x0 0x0 0x0 0x3 &pcie_intc0 0x3>,
+					<0x0 0x0 0x0 0x4 &pcie_intc0 0x4>;
+			msi-controller;
+			device_type = "pci";
+			starfive,stg-syscon = <&stg_syscon>;
+			bus-range = <0x0 0xff>;
+			clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>,
+				 <&stgcrg JH7110_STGCLK_PCIE0_TL>,
+				 <&stgcrg JH7110_STGCLK_PCIE0_AXI_MST0>,
+				 <&stgcrg JH7110_STGCLK_PCIE0_APB>;
+			clock-names = "noc", "tl", "axi_mst0", "apb";
+			resets = <&stgcrg JH7110_STGRST_PCIE0_AXI_MST0>,
+				 <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV0>,
+				 <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV>,
+				 <&stgcrg JH7110_STGRST_PCIE0_BRG>,
+				 <&stgcrg JH7110_STGRST_PCIE0_CORE>,
+				 <&stgcrg JH7110_STGRST_PCIE0_APB>;
+			reset-names = "mst0", "slv0", "slv", "brg",
+				      "core", "apb";
+			status = "disabled";
+
+			pcie_intc0: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		pcie1: pcie@9c0000000 {
+			compatible = "starfive,jh7110-pcie";
+			reg = <0x9 0xc0000000 0x0 0x1000000>,
+			      <0x0 0x2c000000 0x0 0x100000>;
+			reg-names = "cfg", "apb";
+			linux,pci-domain = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x82000000  0x0 0x38000000  0x0 0x38000000 0x0 0x08000000>,
+				 <0xc3000000  0x9 0x80000000  0x9 0x80000000 0x0 0x40000000>;
+			interrupts = <57>;
+			interrupt-parent = <&plic>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc1 0x1>,
+					<0x0 0x0 0x0 0x2 &pcie_intc1 0x2>,
+					<0x0 0x0 0x0 0x3 &pcie_intc1 0x3>,
+					<0x0 0x0 0x0 0x4 &pcie_intc1 0x4>;
+			msi-controller;
+			device_type = "pci";
+			starfive,stg-syscon = <&stg_syscon>;
+			bus-range = <0x0 0xff>;
+			clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>,
+				 <&stgcrg JH7110_STGCLK_PCIE1_TL>,
+				 <&stgcrg JH7110_STGCLK_PCIE1_AXI_MST0>,
+				 <&stgcrg JH7110_STGCLK_PCIE1_APB>;
+			clock-names = "noc", "tl", "axi_mst0", "apb";
+			resets = <&stgcrg JH7110_STGRST_PCIE1_AXI_MST0>,
+				 <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV0>,
+				 <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV>,
+				 <&stgcrg JH7110_STGRST_PCIE1_BRG>,
+				 <&stgcrg JH7110_STGRST_PCIE1_CORE>,
+				 <&stgcrg JH7110_STGRST_PCIE1_APB>;
+			reset-names = "mst0", "slv0", "slv", "brg",
+				      "core", "apb";
+			status = "disabled";
+
+			pcie_intc1: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
 	};
 };