[08/17] pmdomain: qcom: Move Kconfig options to the pmdomain subsystem
Commit Message
The Kconfig options belongs closer to the corresponding implementations,
hence let's move them from the soc subsystem to the pmdomain subsystem.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: <linux-arm-msm@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/pmdomain/Kconfig | 1 +
drivers/pmdomain/qcom/Kconfig | 41 +++++++++++++++++++++++++++++++++++
drivers/soc/qcom/Kconfig | 37 -------------------------------
3 files changed, 42 insertions(+), 37 deletions(-)
create mode 100644 drivers/pmdomain/qcom/Kconfig
Comments
On 14.09.2023 13:17, Ulf Hansson wrote:
> The Kconfig options belongs closer to the corresponding implementations,
> hence let's move them from the soc subsystem to the pmdomain subsystem.
>
> Cc: Bjorn Andersson <andersson@kernel.org>
> Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
> Cc: Andy Gross <agross@kernel.org>
> Cc: <linux-arm-msm@vger.kernel.org>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> ---
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
On Thu, Sep 14, 2023 at 01:17:53PM +0200, Ulf Hansson wrote:
> The Kconfig options belongs closer to the corresponding implementations,
> hence let's move them from the soc subsystem to the pmdomain subsystem.
>
> Cc: Bjorn Andersson <andersson@kernel.org>
> Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
> Cc: Andy Gross <agross@kernel.org>
> Cc: <linux-arm-msm@vger.kernel.org>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Regards,
Bjorn
@@ -7,5 +7,6 @@ source "drivers/pmdomain/apple/Kconfig"
source "drivers/pmdomain/bcm/Kconfig"
source "drivers/pmdomain/imx/Kconfig"
source "drivers/pmdomain/mediatek/Kconfig"
+source "drivers/pmdomain/qcom/Kconfig"
endmenu
new file mode 100644
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Qualcomm Power Domains"
+
+config QCOM_CPR
+ tristate "QCOM Core Power Reduction (CPR) support"
+ depends on ARCH_QCOM && HAS_IOMEM
+ select PM_OPP
+ select REGMAP
+ help
+ Say Y here to enable support for the CPR hardware found on Qualcomm
+ SoCs like QCS404.
+
+ This driver populates CPU OPPs tables and makes adjustments to the
+ tables based on feedback from the CPR hardware. If you want to do
+ CPUfrequency scaling say Y here.
+
+ To compile this driver as a module, choose M here: the module will
+ be called qcom-cpr
+
+config QCOM_RPMHPD
+ tristate "Qualcomm RPMh Power domain driver"
+ depends on QCOM_RPMH && QCOM_COMMAND_DB
+ help
+ QCOM RPMh Power domain driver to support power-domains with
+ performance states. The driver communicates a performance state
+ value to RPMh which then translates it into corresponding voltage
+ for the voltage rail.
+
+config QCOM_RPMPD
+ tristate "Qualcomm RPM Power domain driver"
+ depends on PM && OF
+ depends on QCOM_SMD_RPM
+ select PM_GENERIC_DOMAINS
+ select PM_GENERIC_DOMAINS_OF
+ help
+ QCOM RPM Power domain driver to support power-domains with
+ performance states. The driver communicates a performance state
+ value to RPM which then translates it into corresponding voltage
+ for the voltage rail.
+
+endmenu
@@ -26,22 +26,6 @@ config QCOM_COMMAND_DB
resource on a RPM-hardened platform must use this database to get
SoC specific identifier and information for the shared resources.
-config QCOM_CPR
- tristate "QCOM Core Power Reduction (CPR) support"
- depends on ARCH_QCOM && HAS_IOMEM
- select PM_OPP
- select REGMAP
- help
- Say Y here to enable support for the CPR hardware found on Qualcomm
- SoCs like QCS404.
-
- This driver populates CPU OPPs tables and makes adjustments to the
- tables based on feedback from the CPR hardware. If you want to do
- CPUfrequency scaling say Y here.
-
- To compile this driver as a module, choose M here: the module will
- be called qcom-cpr
-
config QCOM_GENI_SE
tristate "QCOM GENI Serial Engine Driver"
depends on ARCH_QCOM || COMPILE_TEST
@@ -157,27 +141,6 @@ config QCOM_RPMH
of hardware components aggregate requests for these resources and
help apply the aggregated state on the resource.
-config QCOM_RPMHPD
- tristate "Qualcomm RPMh Power domain driver"
- depends on QCOM_RPMH && QCOM_COMMAND_DB
- help
- QCOM RPMh Power domain driver to support power-domains with
- performance states. The driver communicates a performance state
- value to RPMh which then translates it into corresponding voltage
- for the voltage rail.
-
-config QCOM_RPMPD
- tristate "Qualcomm RPM Power domain driver"
- depends on PM && OF
- depends on QCOM_SMD_RPM
- select PM_GENERIC_DOMAINS
- select PM_GENERIC_DOMAINS_OF
- help
- QCOM RPM Power domain driver to support power-domains with
- performance states. The driver communicates a performance state
- value to RPM which then translates it into corresponding voltage
- for the voltage rail.
-
config QCOM_SMEM
tristate "Qualcomm Shared Memory Manager (SMEM)"
depends on ARCH_QCOM || COMPILE_TEST