diff mbox series

[v2,1/2] ASoC: dt-bindings: qcom,wsa883x: Use correct SD_N polarity

Message ID 20221110133512.478831-1-krzysztof.kozlowski@linaro.org
State New
Headers
Series [v2,1/2] ASoC: dt-bindings: qcom,wsa883x: Use correct SD_N polarity |

Commit Message

Krzysztof Kozlowski Nov. 10, 2022, 1:35 p.m. UTC 
  Use correct polarity in example and powerdown-gpios description.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v1:
1. New patch.
---
 Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

Comments

Srinivas Kandagatla Nov. 11, 2022, 4:42 p.m. UTC | #1 
On 10/11/2022 13:35, Krzysztof Kozlowski wrote:
> Use correct polarity in example and powerdown-gpios description.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
> 
> Changes since v1:
> 1. New patch.
> ---
>   Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml | 8 +++++---
>   1 file changed, 5 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
> index 6113f65f2990..99f9c10bbc83 100644
> --- a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
> +++ b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
> @@ -23,7 +23,7 @@ properties:
>       maxItems: 1
>   
>     powerdown-gpios:
> -    description: GPIO spec for Powerdown/Shutdown line to use
> +    description: GPIO spec for Powerdown/Shutdown line to use (pin SD_N)
>       maxItems: 1
>   
>     vdd-supply:
> @@ -47,6 +47,8 @@ additionalProperties: false
>   
>   examples:
>     - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
>       soundwire-controller@3250000 {
>           #address-cells = <2>;
>           #size-cells = <0>;
> @@ -55,7 +57,7 @@ examples:
>           speaker@0,1 {
>               compatible = "sdw10217020200";
>               reg = <0 1>;
> -            powerdown-gpios = <&tlmm 1 0>;
> +            powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
>               vdd-supply = <&vreg_s10b_1p8>;
>               #thermal-sensor-cells = <0>;
>               #sound-dai-cells = <0>;
> @@ -64,7 +66,7 @@ examples:
>           speaker@0,2 {
>               compatible = "sdw10217020200";
>               reg = <0 2>;
> -            powerdown-gpios = <&tlmm 89 0>;
> +            powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
>               vdd-supply = <&vreg_s10b_1p8>;
>               #thermal-sensor-cells = <0>;
>               #sound-dai-cells = <0>;
Mark Brown Nov. 11, 2022, 8:09 p.m. UTC | #2 
On Thu, 10 Nov 2022 14:35:11 +0100, Krzysztof Kozlowski wrote:
> Use correct polarity in example and powerdown-gpios description.
> 
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/2] ASoC: dt-bindings: qcom,wsa883x: Use correct SD_N polarity
      commit: 817e981736d27731adb9d7ca11eb8069d1ee569d
[2/2] ASoC: codecs: wsa883x: Use proper shutdown GPIO polarity
      commit: ec5dba73f7ba10797904cf18092d2e6975a22147

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
index 6113f65f2990..99f9c10bbc83 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
@@ -23,7 +23,7 @@  properties:
     maxItems: 1
 
   powerdown-gpios:
-    description: GPIO spec for Powerdown/Shutdown line to use
+    description: GPIO spec for Powerdown/Shutdown line to use (pin SD_N)
     maxItems: 1
 
   vdd-supply:
@@ -47,6 +47,8 @@  additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
+
     soundwire-controller@3250000 {
         #address-cells = <2>;
         #size-cells = <0>;
@@ -55,7 +57,7 @@  examples:
         speaker@0,1 {
             compatible = "sdw10217020200";
             reg = <0 1>;
-            powerdown-gpios = <&tlmm 1 0>;
+            powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
             vdd-supply = <&vreg_s10b_1p8>;
             #thermal-sensor-cells = <0>;
             #sound-dai-cells = <0>;
@@ -64,7 +66,7 @@  examples:
         speaker@0,2 {
             compatible = "sdw10217020200";
             reg = <0 2>;
-            powerdown-gpios = <&tlmm 89 0>;
+            powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
             vdd-supply = <&vreg_s10b_1p8>;
             #thermal-sensor-cells = <0>;
             #sound-dai-cells = <0>;