diff mbox series

[V3,2/4] arm_pmu: acpi: Add a representative platform device for TRBE

Message ID 20230803055652.1322801-3-anshuman.khandual@arm.com
State New
Headers
Series coresight: trbe: Enable ACPI based devices |

Commit Message

Anshuman Khandual Aug. 3, 2023, 5:56 a.m. UTC 
  ACPI TRBE does not have a HID for identification which could create and add
a platform device into the platform bus. Also without a platform device, it
cannot be probed and bound to a platform driver.

This creates a dummy platform device for TRBE after ascertaining that ACPI
provides required interrupts uniformly across all cpus on the system. This
device gets created inside drivers/perf/arm_pmu_acpi.c to accommodate TRBE
being built as a module.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
---
 arch/arm64/include/asm/acpi.h |  3 +++
 drivers/perf/arm_pmu_acpi.c   | 37 ++++++++++++++++++++++++++++++++++-
 include/linux/perf/arm_pmu.h  |  1 +
 3 files changed, 40 insertions(+), 1 deletion(-)

Comments

Yicong Yang Aug. 3, 2023, 9:14 a.m. UTC | #1 
On 2023/8/3 13:56, Anshuman Khandual wrote:
> ACPI TRBE does not have a HID for identification which could create and add
> a platform device into the platform bus. Also without a platform device, it
> cannot be probed and bound to a platform driver.
> 
> This creates a dummy platform device for TRBE after ascertaining that ACPI
> provides required interrupts uniformly across all cpus on the system. This
> device gets created inside drivers/perf/arm_pmu_acpi.c to accommodate TRBE
> being built as a module.
> 
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
> ---
>  arch/arm64/include/asm/acpi.h |  3 +++
>  drivers/perf/arm_pmu_acpi.c   | 37 ++++++++++++++++++++++++++++++++++-
>  include/linux/perf/arm_pmu.h  |  1 +
>  3 files changed, 40 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
> index bd68e1b7f29f..4d537d56eb84 100644
> --- a/arch/arm64/include/asm/acpi.h
> +++ b/arch/arm64/include/asm/acpi.h
> @@ -42,6 +42,9 @@
>  #define ACPI_MADT_GICC_SPE  (offsetof(struct acpi_madt_generic_interrupt, \
>  	spe_interrupt) + sizeof(u16))
>  
> +#define ACPI_MADT_GICC_TRBE  (offsetof(struct acpi_madt_generic_interrupt, \
> +	trbe_interrupt) + sizeof(u16))
> +
>  /* Basic configuration for ACPI */
>  #ifdef	CONFIG_ACPI
>  pgprot_t __acpi_get_mem_attribute(phys_addr_t addr);
> diff --git a/drivers/perf/arm_pmu_acpi.c b/drivers/perf/arm_pmu_acpi.c
> index 235c14766a36..79feea548e6e 100644
> --- a/drivers/perf/arm_pmu_acpi.c
> +++ b/drivers/perf/arm_pmu_acpi.c
> @@ -69,7 +69,7 @@ static void arm_pmu_acpi_unregister_irq(int cpu)
>  		acpi_unregister_gsi(gsi);
>  }
>  
> -#if IS_ENABLED(CONFIG_ARM_SPE_PMU)
> +#if IS_ENABLED(CONFIG_ARM_SPE_PMU) || IS_ENABLED(CONFIG_CORESIGHT_TRBE)
>  static int
>  arm_acpi_register_pmu_device(struct platform_device *pdev, u8 len,
>  			     u16 (*parse_gsi)(struct acpi_madt_generic_interrupt *))
> @@ -166,6 +166,40 @@ static inline void arm_spe_acpi_register_device(void)
>  }
>  #endif /* CONFIG_ARM_SPE_PMU */
>  
> +#ifdef CONFIG_CORESIGHT_TRBE

Maybe we should use #if IS_ENABLED(CONFIG_CORESIGHT_TRBE) here and other places?

As trbe can be configured as a module, when CONFIG_CORESIGHT_TRBE=m this block
won't be compiled. Referred to

https://github.com/torvalds/linux/blob/c7c90e121e992eefdf07945e5a6e9cf097b29463/include/linux/kconfig.h#L68

> +static struct resource trbe_resources[] = {
> +	{
> +		/* irq */
> +		.flags          = IORESOURCE_IRQ,
> +	}
> +};
> +
> +static struct platform_device trbe_dev = {
> +	.name = ARMV8_TRBE_PDEV_NAME,
> +	.id = -1,
> +	.resource = trbe_resources,
> +	.num_resources = ARRAY_SIZE(trbe_resources)
> +};
> +
> +static u16 arm_trbe_parse_gsi(struct acpi_madt_generic_interrupt *gicc)
> +{
> +	return gicc->trbe_interrupt;
> +}
> +
> +static void arm_trbe_acpi_register_device(void)
> +{
> +	int ret = arm_acpi_register_pmu_device(&trbe_dev, ACPI_MADT_GICC_TRBE,
> +					       arm_trbe_parse_gsi);
> +	if (ret)
> +		pr_warn("ACPI: TRBE: Unable to register device\n");
> +}
> +#else
> +static inline void arm_trbe_acpi_register_device(void)
> +{
> +
> +}
> +#endif /* CONFIG_CORESIGHT_TRBE */
> +
>  static int arm_pmu_acpi_parse_irqs(void)
>  {
>  	int irq, cpu, irq_cpu, err;
> @@ -401,6 +435,7 @@ static int arm_pmu_acpi_init(void)
>  		return 0;
>  
>  	arm_spe_acpi_register_device();
> +	arm_trbe_acpi_register_device();
>  
>  	return 0;
>  }
> diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h
> index a0801f68762b..143fbc10ecfe 100644
> --- a/include/linux/perf/arm_pmu.h
> +++ b/include/linux/perf/arm_pmu.h
> @@ -187,5 +187,6 @@ void armpmu_free_irq(int irq, int cpu);
>  #endif /* CONFIG_ARM_PMU */
>  
>  #define ARMV8_SPE_PDEV_NAME "arm,spe-v1"
> +#define ARMV8_TRBE_PDEV_NAME "arm,trbe"
>  
>  #endif /* __ARM_PMU_H__ */
>
Anshuman Khandual Aug. 4, 2023, 9:34 a.m. UTC | #2 
On 8/3/23 14:44, Yicong Yang wrote:
> On 2023/8/3 13:56, Anshuman Khandual wrote:
>> ACPI TRBE does not have a HID for identification which could create and add
>> a platform device into the platform bus. Also without a platform device, it
>> cannot be probed and bound to a platform driver.
>>
>> This creates a dummy platform device for TRBE after ascertaining that ACPI
>> provides required interrupts uniformly across all cpus on the system. This
>> device gets created inside drivers/perf/arm_pmu_acpi.c to accommodate TRBE
>> being built as a module.
>>
>> Cc: Catalin Marinas <catalin.marinas@arm.com>
>> Cc: Will Deacon <will@kernel.org>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: linux-kernel@vger.kernel.org
>> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
>> ---
>>  arch/arm64/include/asm/acpi.h |  3 +++
>>  drivers/perf/arm_pmu_acpi.c   | 37 ++++++++++++++++++++++++++++++++++-
>>  include/linux/perf/arm_pmu.h  |  1 +
>>  3 files changed, 40 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
>> index bd68e1b7f29f..4d537d56eb84 100644
>> --- a/arch/arm64/include/asm/acpi.h
>> +++ b/arch/arm64/include/asm/acpi.h
>> @@ -42,6 +42,9 @@
>>  #define ACPI_MADT_GICC_SPE  (offsetof(struct acpi_madt_generic_interrupt, \
>>  	spe_interrupt) + sizeof(u16))
>>  
>> +#define ACPI_MADT_GICC_TRBE  (offsetof(struct acpi_madt_generic_interrupt, \
>> +	trbe_interrupt) + sizeof(u16))
>> +
>>  /* Basic configuration for ACPI */
>>  #ifdef	CONFIG_ACPI
>>  pgprot_t __acpi_get_mem_attribute(phys_addr_t addr);
>> diff --git a/drivers/perf/arm_pmu_acpi.c b/drivers/perf/arm_pmu_acpi.c
>> index 235c14766a36..79feea548e6e 100644
>> --- a/drivers/perf/arm_pmu_acpi.c
>> +++ b/drivers/perf/arm_pmu_acpi.c
>> @@ -69,7 +69,7 @@ static void arm_pmu_acpi_unregister_irq(int cpu)
>>  		acpi_unregister_gsi(gsi);
>>  }
>>  
>> -#if IS_ENABLED(CONFIG_ARM_SPE_PMU)
>> +#if IS_ENABLED(CONFIG_ARM_SPE_PMU) || IS_ENABLED(CONFIG_CORESIGHT_TRBE)
>>  static int
>>  arm_acpi_register_pmu_device(struct platform_device *pdev, u8 len,
>>  			     u16 (*parse_gsi)(struct acpi_madt_generic_interrupt *))
>> @@ -166,6 +166,40 @@ static inline void arm_spe_acpi_register_device(void)
>>  }
>>  #endif /* CONFIG_ARM_SPE_PMU */
>>  
>> +#ifdef CONFIG_CORESIGHT_TRBE
> Maybe we should use #if IS_ENABLED(CONFIG_CORESIGHT_TRBE) here and other places?
> 
> As trbe can be configured as a module, when CONFIG_CORESIGHT_TRBE=m this block
> won't be compiled. Referred to
> 
> https://github.com/torvalds/linux/blob/c7c90e121e992eefdf07945e5a6e9cf097b29463/include/linux/kconfig.h#L68

You are right, just making CONFIG_CORESIGHT_TRBE=m make it fall back on the
stub arm_trbe_acpi_register_device() definition, which does not create the
required dummy platform device thus preventing TRBE probe on the platform.

Will change the above #ifdef as IS_ENABLED() for CONFIG_CORESIGHT_TRBE and
revert back using IS_ENABLED() in the previous patch for CONFIG_ARM_SPE_PMU
as well. Thanks for noticing this problem.
Anshuman Khandual Aug. 4, 2023, 10:01 a.m. UTC | #3 
On 8/3/23 11:26, Anshuman Khandual wrote:
> ACPI TRBE does not have a HID for identification which could create and add
> a platform device into the platform bus. Also without a platform device, it
> cannot be probed and bound to a platform driver.
> 
> This creates a dummy platform device for TRBE after ascertaining that ACPI
> provides required interrupts uniformly across all cpus on the system. This
> device gets created inside drivers/perf/arm_pmu_acpi.c to accommodate TRBE
> being built as a module.
> 
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
> ---
>  arch/arm64/include/asm/acpi.h |  3 +++
>  drivers/perf/arm_pmu_acpi.c   | 37 ++++++++++++++++++++++++++++++++++-
>  include/linux/perf/arm_pmu.h  |  1 +
>  3 files changed, 40 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
> index bd68e1b7f29f..4d537d56eb84 100644
> --- a/arch/arm64/include/asm/acpi.h
> +++ b/arch/arm64/include/asm/acpi.h
> @@ -42,6 +42,9 @@
>  #define ACPI_MADT_GICC_SPE  (offsetof(struct acpi_madt_generic_interrupt, \
>  	spe_interrupt) + sizeof(u16))
>  
> +#define ACPI_MADT_GICC_TRBE  (offsetof(struct acpi_madt_generic_interrupt, \
> +	trbe_interrupt) + sizeof(u16))
> +
>  /* Basic configuration for ACPI */
>  #ifdef	CONFIG_ACPI
>  pgprot_t __acpi_get_mem_attribute(phys_addr_t addr);
> diff --git a/drivers/perf/arm_pmu_acpi.c b/drivers/perf/arm_pmu_acpi.c
> index 235c14766a36..79feea548e6e 100644
> --- a/drivers/perf/arm_pmu_acpi.c
> +++ b/drivers/perf/arm_pmu_acpi.c
> @@ -69,7 +69,7 @@ static void arm_pmu_acpi_unregister_irq(int cpu)
>  		acpi_unregister_gsi(gsi);
>  }
>  
> -#if IS_ENABLED(CONFIG_ARM_SPE_PMU)
> +#if IS_ENABLED(CONFIG_ARM_SPE_PMU) || IS_ENABLED(CONFIG_CORESIGHT_TRBE)

Rather than adding IS_ENABLED() checks for all applicable configs in future
which will need to call arm_acpi_register_pmu_device() for a dummy platform
device, could we instead just add __maybe_unused for the function to prevent
build warning when there are no call sites ? Seems bit better and simpler.

>  static int
>  arm_acpi_register_pmu_device(struct platform_device *pdev, u8 len,
>  			     u16 (*parse_gsi)(struct acpi_madt_generic_interrupt *))
> @@ -166,6 +166,40 @@ static inline void arm_spe_acpi_register_device(void)
>  }
>  #endif /* CONFIG_ARM_SPE_PMU */
>  
> +#ifdef CONFIG_CORESIGHT_TRBE
> +static struct resource trbe_resources[] = {
> +	{
> +		/* irq */
> +		.flags          = IORESOURCE_IRQ,
> +	}
> +};
> +
> +static struct platform_device trbe_dev = {
> +	.name = ARMV8_TRBE_PDEV_NAME,
> +	.id = -1,
> +	.resource = trbe_resources,
> +	.num_resources = ARRAY_SIZE(trbe_resources)
> +};
> +
> +static u16 arm_trbe_parse_gsi(struct acpi_madt_generic_interrupt *gicc)
> +{
> +	return gicc->trbe_interrupt;
> +}
> +
> +static void arm_trbe_acpi_register_device(void)
> +{
> +	int ret = arm_acpi_register_pmu_device(&trbe_dev, ACPI_MADT_GICC_TRBE,
> +					       arm_trbe_parse_gsi);
> +	if (ret)
> +		pr_warn("ACPI: TRBE: Unable to register device\n");
> +}
> +#else
> +static inline void arm_trbe_acpi_register_device(void)
> +{
> +
> +}
> +#endif /* CONFIG_CORESIGHT_TRBE */
> +
>  static int arm_pmu_acpi_parse_irqs(void)
>  {
>  	int irq, cpu, irq_cpu, err;
> @@ -401,6 +435,7 @@ static int arm_pmu_acpi_init(void)
>  		return 0;
>  
>  	arm_spe_acpi_register_device();
> +	arm_trbe_acpi_register_device();
>  
>  	return 0;
>  }
> diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h
> index a0801f68762b..143fbc10ecfe 100644
> --- a/include/linux/perf/arm_pmu.h
> +++ b/include/linux/perf/arm_pmu.h
> @@ -187,5 +187,6 @@ void armpmu_free_irq(int irq, int cpu);
>  #endif /* CONFIG_ARM_PMU */
>  
>  #define ARMV8_SPE_PDEV_NAME "arm,spe-v1"
> +#define ARMV8_TRBE_PDEV_NAME "arm,trbe"
>  
>  #endif /* __ARM_PMU_H__ */
diff mbox series

Patch

diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
index bd68e1b7f29f..4d537d56eb84 100644
--- a/arch/arm64/include/asm/acpi.h
+++ b/arch/arm64/include/asm/acpi.h
@@ -42,6 +42,9 @@ 
 #define ACPI_MADT_GICC_SPE  (offsetof(struct acpi_madt_generic_interrupt, \
 	spe_interrupt) + sizeof(u16))
 
+#define ACPI_MADT_GICC_TRBE  (offsetof(struct acpi_madt_generic_interrupt, \
+	trbe_interrupt) + sizeof(u16))
+
 /* Basic configuration for ACPI */
 #ifdef	CONFIG_ACPI
 pgprot_t __acpi_get_mem_attribute(phys_addr_t addr);
diff --git a/drivers/perf/arm_pmu_acpi.c b/drivers/perf/arm_pmu_acpi.c
index 235c14766a36..79feea548e6e 100644
--- a/drivers/perf/arm_pmu_acpi.c
+++ b/drivers/perf/arm_pmu_acpi.c
@@ -69,7 +69,7 @@  static void arm_pmu_acpi_unregister_irq(int cpu)
 		acpi_unregister_gsi(gsi);
 }
 
-#if IS_ENABLED(CONFIG_ARM_SPE_PMU)
+#if IS_ENABLED(CONFIG_ARM_SPE_PMU) || IS_ENABLED(CONFIG_CORESIGHT_TRBE)
 static int
 arm_acpi_register_pmu_device(struct platform_device *pdev, u8 len,
 			     u16 (*parse_gsi)(struct acpi_madt_generic_interrupt *))
@@ -166,6 +166,40 @@  static inline void arm_spe_acpi_register_device(void)
 }
 #endif /* CONFIG_ARM_SPE_PMU */
 
+#ifdef CONFIG_CORESIGHT_TRBE
+static struct resource trbe_resources[] = {
+	{
+		/* irq */
+		.flags          = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device trbe_dev = {
+	.name = ARMV8_TRBE_PDEV_NAME,
+	.id = -1,
+	.resource = trbe_resources,
+	.num_resources = ARRAY_SIZE(trbe_resources)
+};
+
+static u16 arm_trbe_parse_gsi(struct acpi_madt_generic_interrupt *gicc)
+{
+	return gicc->trbe_interrupt;
+}
+
+static void arm_trbe_acpi_register_device(void)
+{
+	int ret = arm_acpi_register_pmu_device(&trbe_dev, ACPI_MADT_GICC_TRBE,
+					       arm_trbe_parse_gsi);
+	if (ret)
+		pr_warn("ACPI: TRBE: Unable to register device\n");
+}
+#else
+static inline void arm_trbe_acpi_register_device(void)
+{
+
+}
+#endif /* CONFIG_CORESIGHT_TRBE */
+
 static int arm_pmu_acpi_parse_irqs(void)
 {
 	int irq, cpu, irq_cpu, err;
@@ -401,6 +435,7 @@  static int arm_pmu_acpi_init(void)
 		return 0;
 
 	arm_spe_acpi_register_device();
+	arm_trbe_acpi_register_device();
 
 	return 0;
 }
diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h
index a0801f68762b..143fbc10ecfe 100644
--- a/include/linux/perf/arm_pmu.h
+++ b/include/linux/perf/arm_pmu.h
@@ -187,5 +187,6 @@  void armpmu_free_irq(int irq, int cpu);
 #endif /* CONFIG_ARM_PMU */
 
 #define ARMV8_SPE_PDEV_NAME "arm,spe-v1"
+#define ARMV8_TRBE_PDEV_NAME "arm,trbe"
 
 #endif /* __ARM_PMU_H__ */