[02/10] x86: "sse4arg" adjustments
Checks
Commit Message
Record common properties in other attributes' default calculations:
There's always a 1-byte immediate, and they're always encoded in a VEX3-
like manner (note that "prefix_extra" already evaluates to 1 in this
case). The drop now (or already previously) redundant explicit
attributes, adding "mode" ones where they were missing.
Furthermore use "sse4arg" consistently for all VPCOM* insns; so far
signed comparisons did use it, while unsigned ones used "ssecmp". Note
that while they have (not counting the explicit or implicit immediate
operand) they really only have 3 operands, the operator is also counted
in those patterns. That's relevant for establishing the "memory"
attribute's value, and at the same time benign when there are only
register operands.
Note that despite also having 4 operands, multiply-add insns aren't
affected by this change, as they use "ssemuladd" for "type".
gcc/
* config/i386/i386.md (length_immediate): Handle "sse4arg".
(prefix): Likewise.
(*xop_pcmov_<mode>): Add "mode" attribute.
* config/i386/mmx.md (*xop_maskcmp<mode>3): Drop "prefix_data16",
"prefix_rep", "prefix_extra", and "length_immediate" attributes.
(*xop_maskcmp_uns<mode>3): Likewise. Switch "type" to "sse4arg".
(*xop_pcmov_<mode>): Add "mode" attribute.
* config/i386/sse.md (xop_pcmov_<mode><avxsizesuffix>): Add "mode"
attribute.
(xop_maskcmp<mode>3): Drop "prefix_data16", "prefix_rep",
"prefix_extra", and "length_immediate" attributes.
(xop_maskcmp_uns<mode>3): Likewise. Switch "type" to "sse4arg".
(xop_maskcmp_uns2<mode>3): Drop "prefix_data16", "prefix_extra",
and "length_immediate" attributes. Switch "type" to "sse4arg".
(xop_pcom_tf<mode>3): Likewise.
(xop_vpermil2<mode>3): Drop "length_immediate" attribute.
Comments
On Thu, Aug 3, 2023 at 4:10 PM Jan Beulich via Gcc-patches
<gcc-patches@gcc.gnu.org> wrote:
>
> Record common properties in other attributes' default calculations:
> There's always a 1-byte immediate, and they're always encoded in a VEX3-
> like manner (note that "prefix_extra" already evaluates to 1 in this
> case). The drop now (or already previously) redundant explicit
> attributes, adding "mode" ones where they were missing.
>
> Furthermore use "sse4arg" consistently for all VPCOM* insns; so far
> signed comparisons did use it, while unsigned ones used "ssecmp". Note
> that while they have (not counting the explicit or implicit immediate
> operand) they really only have 3 operands, the operator is also counted
> in those patterns. That's relevant for establishing the "memory"
> attribute's value, and at the same time benign when there are only
> register operands.
>
> Note that despite also having 4 operands, multiply-add insns aren't
> affected by this change, as they use "ssemuladd" for "type".
Ok. (I'm not quite familiar for those xop instructions encoding, you
must have better understanding than me, so just rubber-stamp the
patch.
>
> gcc/
>
> * config/i386/i386.md (length_immediate): Handle "sse4arg".
> (prefix): Likewise.
> (*xop_pcmov_<mode>): Add "mode" attribute.
> * config/i386/mmx.md (*xop_maskcmp<mode>3): Drop "prefix_data16",
> "prefix_rep", "prefix_extra", and "length_immediate" attributes.
> (*xop_maskcmp_uns<mode>3): Likewise. Switch "type" to "sse4arg".
> (*xop_pcmov_<mode>): Add "mode" attribute.
> * config/i386/sse.md (xop_pcmov_<mode><avxsizesuffix>): Add "mode"
> attribute.
> (xop_maskcmp<mode>3): Drop "prefix_data16", "prefix_rep",
> "prefix_extra", and "length_immediate" attributes.
> (xop_maskcmp_uns<mode>3): Likewise. Switch "type" to "sse4arg".
> (xop_maskcmp_uns2<mode>3): Drop "prefix_data16", "prefix_extra",
> and "length_immediate" attributes. Switch "type" to "sse4arg".
> (xop_pcom_tf<mode>3): Likewise.
> (xop_vpermil2<mode>3): Drop "length_immediate" attribute.
>
> --- a/gcc/config/i386/i386.md
> +++ b/gcc/config/i386/i386.md
> @@ -536,6 +536,8 @@
> (cond [(eq_attr "type" "incdec,setcc,icmov,str,lea,other,multi,idiv,leave,
> bitmanip,imulx,msklog,mskmov")
> (const_int 0)
> + (eq_attr "type" "sse4arg")
> + (const_int 1)
> (eq_attr "unit" "i387,sse,mmx")
> (const_int 0)
> (eq_attr "type" "alu,alu1,negnot,imovx,ishift,ishiftx,ishift1,
> @@ -635,6 +637,8 @@
> (const_string "vex")
> (eq_attr "mode" "XI,V16SF,V8DF")
> (const_string "evex")
> + (eq_attr "type" "sse4arg")
> + (const_string "vex")
> ]
> (const_string "orig")))
>
> @@ -23286,7 +23290,8 @@
> (match_operand:MODEF 3 "register_operand" "x")))]
> "TARGET_XOP"
> "vpcmov\t{%1, %3, %2, %0|%0, %2, %3, %1}"
> - [(set_attr "type" "sse4arg")])
> + [(set_attr "type" "sse4arg")
> + (set_attr "mode" "TI")])
>
> ;; These versions of the min/max patterns are intentionally ignorant of
> ;; their behavior wrt -0.0 and NaN (via the commutative operand mark).
> --- a/gcc/config/i386/mmx.md
> +++ b/gcc/config/i386/mmx.md
> @@ -2909,10 +2909,6 @@
> "TARGET_XOP"
> "vpcom%Y1<mmxvecsize>\t{%3, %2, %0|%0, %2, %3}"
> [(set_attr "type" "sse4arg")
> - (set_attr "prefix_data16" "0")
> - (set_attr "prefix_rep" "0")
> - (set_attr "prefix_extra" "2")
> - (set_attr "length_immediate" "1")
> (set_attr "mode" "TI")])
>
> (define_insn "*xop_maskcmp<mode>3"
> @@ -2923,10 +2919,6 @@
> "TARGET_XOP"
> "vpcom%Y1<mmxvecsize>\t{%3, %2, %0|%0, %2, %3}"
> [(set_attr "type" "sse4arg")
> - (set_attr "prefix_data16" "0")
> - (set_attr "prefix_rep" "0")
> - (set_attr "prefix_extra" "2")
> - (set_attr "length_immediate" "1")
> (set_attr "mode" "TI")])
>
> (define_insn "*xop_maskcmp_uns<mode>3"
> @@ -2936,11 +2928,7 @@
> (match_operand:MMXMODEI 3 "register_operand" "x")]))]
> "TARGET_XOP"
> "vpcom%Y1u<mmxvecsize>\t{%3, %2, %0|%0, %2, %3}"
> - [(set_attr "type" "ssecmp")
> - (set_attr "prefix_data16" "0")
> - (set_attr "prefix_rep" "0")
> - (set_attr "prefix_extra" "2")
> - (set_attr "length_immediate" "1")
> + [(set_attr "type" "sse4arg")
> (set_attr "mode" "TI")])
>
> (define_insn "*xop_maskcmp_uns<mode>3"
> @@ -2950,11 +2938,7 @@
> (match_operand:VI_16_32 3 "register_operand" "x")]))]
> "TARGET_XOP"
> "vpcom%Y1u<mmxvecsize>\t{%3, %2, %0|%0, %2, %3}"
> - [(set_attr "type" "ssecmp")
> - (set_attr "prefix_data16" "0")
> - (set_attr "prefix_rep" "0")
> - (set_attr "prefix_extra" "2")
> - (set_attr "length_immediate" "1")
> + [(set_attr "type" "sse4arg")
> (set_attr "mode" "TI")])
>
> (define_expand "vec_cmp<mode><mode>"
> @@ -3144,7 +3128,8 @@
> (match_operand:MMXMODE124 2 "register_operand" "x")))]
> "TARGET_XOP && TARGET_MMX_WITH_SSE"
> "vpcmov\t{%3, %2, %1, %0|%0, %1, %2, %3}"
> - [(set_attr "type" "sse4arg")])
> + [(set_attr "type" "sse4arg")
> + (set_attr "mode" "TI")])
>
> (define_insn "*xop_pcmov_<mode>"
> [(set (match_operand:VI_16_32 0 "register_operand" "=x")
> @@ -3154,7 +3139,8 @@
> (match_operand:VI_16_32 2 "register_operand" "x")))]
> "TARGET_XOP"
> "vpcmov\t{%3, %2, %1, %0|%0, %1, %2, %3}"
> - [(set_attr "type" "sse4arg")])
> + [(set_attr "type" "sse4arg")
> + (set_attr "mode" "TI")])
>
> ;; XOP permute instructions
> (define_insn "mmx_ppermv64"
> --- a/gcc/config/i386/sse.md
> +++ b/gcc/config/i386/sse.md
> @@ -24821,7 +24821,8 @@
> (match_operand:V_128_256 2 "nonimmediate_operand" "xm,x")))]
> "TARGET_XOP"
> "vpcmov\t{%3, %2, %1, %0|%0, %1, %2, %3}"
> - [(set_attr "type" "sse4arg")])
> + [(set_attr "type" "sse4arg")
> + (set_attr "mode" "<sseinsnmode>")])
>
> ;; Recognize XOP's vpcmov from canonical (xor (and (xor t f) c) f)
> (define_split
> @@ -25739,10 +25740,6 @@
> "TARGET_XOP"
> "vpcom%Y1<ssemodesuffix>\t{%3, %2, %0|%0, %2, %3}"
> [(set_attr "type" "sse4arg")
> - (set_attr "prefix_data16" "0")
> - (set_attr "prefix_rep" "0")
> - (set_attr "prefix_extra" "2")
> - (set_attr "length_immediate" "1")
> (set_attr "mode" "TI")])
>
> (define_insn "xop_maskcmp_uns<mode>3"
> @@ -25752,11 +25749,7 @@
> (match_operand:VI_128 3 "nonimmediate_operand" "xm")]))]
> "TARGET_XOP"
> "vpcom%Y1u<ssemodesuffix>\t{%3, %2, %0|%0, %2, %3}"
> - [(set_attr "type" "ssecmp")
> - (set_attr "prefix_data16" "0")
> - (set_attr "prefix_rep" "0")
> - (set_attr "prefix_extra" "2")
> - (set_attr "length_immediate" "1")
> + [(set_attr "type" "sse4arg")
> (set_attr "mode" "TI")])
>
> ;; Version of pcom*u* that is called from the intrinsics that allows pcomequ*
> @@ -25771,10 +25764,7 @@
> UNSPEC_XOP_UNSIGNED_CMP))]
> "TARGET_XOP"
> "vpcom%Y1u<ssemodesuffix>\t{%3, %2, %0|%0, %2, %3}"
> - [(set_attr "type" "ssecmp")
> - (set_attr "prefix_data16" "0")
> - (set_attr "prefix_extra" "2")
> - (set_attr "length_immediate" "1")
> + [(set_attr "type" "sse4arg")
> (set_attr "mode" "TI")])
>
> ;; Pcomtrue and pcomfalse support. These are useless instructions, but are
> @@ -25792,10 +25782,7 @@
> ? "vpcomtrue<ssemodesuffix>\t{%2, %1, %0|%0, %1, %2}"
> : "vpcomfalse<ssemodesuffix>\t{%2, %1, %0|%0, %1, %2}");
> }
> - [(set_attr "type" "ssecmp")
> - (set_attr "prefix_data16" "0")
> - (set_attr "prefix_extra" "2")
> - (set_attr "length_immediate" "1")
> + [(set_attr "type" "sse4arg")
> (set_attr "mode" "TI")])
>
> (define_insn "xop_vpermil2<mode>3"
> @@ -25809,7 +25796,6 @@
> "TARGET_XOP"
> "vpermil2<ssemodesuffix>\t{%4, %3, %2, %1, %0|%0, %1, %2, %3, %4}"
> [(set_attr "type" "sse4arg")
> - (set_attr "length_immediate" "1")
> (set_attr "mode" "<MODE>")])
>
> ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
>
--
BR,
Hongtao
@@ -536,6 +536,8 @@
(cond [(eq_attr "type" "incdec,setcc,icmov,str,lea,other,multi,idiv,leave,
bitmanip,imulx,msklog,mskmov")
(const_int 0)
+ (eq_attr "type" "sse4arg")
+ (const_int 1)
(eq_attr "unit" "i387,sse,mmx")
(const_int 0)
(eq_attr "type" "alu,alu1,negnot,imovx,ishift,ishiftx,ishift1,
@@ -635,6 +637,8 @@
(const_string "vex")
(eq_attr "mode" "XI,V16SF,V8DF")
(const_string "evex")
+ (eq_attr "type" "sse4arg")
+ (const_string "vex")
]
(const_string "orig")))
@@ -23286,7 +23290,8 @@
(match_operand:MODEF 3 "register_operand" "x")))]
"TARGET_XOP"
"vpcmov\t{%1, %3, %2, %0|%0, %2, %3, %1}"
- [(set_attr "type" "sse4arg")])
+ [(set_attr "type" "sse4arg")
+ (set_attr "mode" "TI")])
;; These versions of the min/max patterns are intentionally ignorant of
;; their behavior wrt -0.0 and NaN (via the commutative operand mark).
@@ -2909,10 +2909,6 @@
"TARGET_XOP"
"vpcom%Y1<mmxvecsize>\t{%3, %2, %0|%0, %2, %3}"
[(set_attr "type" "sse4arg")
- (set_attr "prefix_data16" "0")
- (set_attr "prefix_rep" "0")
- (set_attr "prefix_extra" "2")
- (set_attr "length_immediate" "1")
(set_attr "mode" "TI")])
(define_insn "*xop_maskcmp<mode>3"
@@ -2923,10 +2919,6 @@
"TARGET_XOP"
"vpcom%Y1<mmxvecsize>\t{%3, %2, %0|%0, %2, %3}"
[(set_attr "type" "sse4arg")
- (set_attr "prefix_data16" "0")
- (set_attr "prefix_rep" "0")
- (set_attr "prefix_extra" "2")
- (set_attr "length_immediate" "1")
(set_attr "mode" "TI")])
(define_insn "*xop_maskcmp_uns<mode>3"
@@ -2936,11 +2928,7 @@
(match_operand:MMXMODEI 3 "register_operand" "x")]))]
"TARGET_XOP"
"vpcom%Y1u<mmxvecsize>\t{%3, %2, %0|%0, %2, %3}"
- [(set_attr "type" "ssecmp")
- (set_attr "prefix_data16" "0")
- (set_attr "prefix_rep" "0")
- (set_attr "prefix_extra" "2")
- (set_attr "length_immediate" "1")
+ [(set_attr "type" "sse4arg")
(set_attr "mode" "TI")])
(define_insn "*xop_maskcmp_uns<mode>3"
@@ -2950,11 +2938,7 @@
(match_operand:VI_16_32 3 "register_operand" "x")]))]
"TARGET_XOP"
"vpcom%Y1u<mmxvecsize>\t{%3, %2, %0|%0, %2, %3}"
- [(set_attr "type" "ssecmp")
- (set_attr "prefix_data16" "0")
- (set_attr "prefix_rep" "0")
- (set_attr "prefix_extra" "2")
- (set_attr "length_immediate" "1")
+ [(set_attr "type" "sse4arg")
(set_attr "mode" "TI")])
(define_expand "vec_cmp<mode><mode>"
@@ -3144,7 +3128,8 @@
(match_operand:MMXMODE124 2 "register_operand" "x")))]
"TARGET_XOP && TARGET_MMX_WITH_SSE"
"vpcmov\t{%3, %2, %1, %0|%0, %1, %2, %3}"
- [(set_attr "type" "sse4arg")])
+ [(set_attr "type" "sse4arg")
+ (set_attr "mode" "TI")])
(define_insn "*xop_pcmov_<mode>"
[(set (match_operand:VI_16_32 0 "register_operand" "=x")
@@ -3154,7 +3139,8 @@
(match_operand:VI_16_32 2 "register_operand" "x")))]
"TARGET_XOP"
"vpcmov\t{%3, %2, %1, %0|%0, %1, %2, %3}"
- [(set_attr "type" "sse4arg")])
+ [(set_attr "type" "sse4arg")
+ (set_attr "mode" "TI")])
;; XOP permute instructions
(define_insn "mmx_ppermv64"
@@ -24821,7 +24821,8 @@
(match_operand:V_128_256 2 "nonimmediate_operand" "xm,x")))]
"TARGET_XOP"
"vpcmov\t{%3, %2, %1, %0|%0, %1, %2, %3}"
- [(set_attr "type" "sse4arg")])
+ [(set_attr "type" "sse4arg")
+ (set_attr "mode" "<sseinsnmode>")])
;; Recognize XOP's vpcmov from canonical (xor (and (xor t f) c) f)
(define_split
@@ -25739,10 +25740,6 @@
"TARGET_XOP"
"vpcom%Y1<ssemodesuffix>\t{%3, %2, %0|%0, %2, %3}"
[(set_attr "type" "sse4arg")
- (set_attr "prefix_data16" "0")
- (set_attr "prefix_rep" "0")
- (set_attr "prefix_extra" "2")
- (set_attr "length_immediate" "1")
(set_attr "mode" "TI")])
(define_insn "xop_maskcmp_uns<mode>3"
@@ -25752,11 +25749,7 @@
(match_operand:VI_128 3 "nonimmediate_operand" "xm")]))]
"TARGET_XOP"
"vpcom%Y1u<ssemodesuffix>\t{%3, %2, %0|%0, %2, %3}"
- [(set_attr "type" "ssecmp")
- (set_attr "prefix_data16" "0")
- (set_attr "prefix_rep" "0")
- (set_attr "prefix_extra" "2")
- (set_attr "length_immediate" "1")
+ [(set_attr "type" "sse4arg")
(set_attr "mode" "TI")])
;; Version of pcom*u* that is called from the intrinsics that allows pcomequ*
@@ -25771,10 +25764,7 @@
UNSPEC_XOP_UNSIGNED_CMP))]
"TARGET_XOP"
"vpcom%Y1u<ssemodesuffix>\t{%3, %2, %0|%0, %2, %3}"
- [(set_attr "type" "ssecmp")
- (set_attr "prefix_data16" "0")
- (set_attr "prefix_extra" "2")
- (set_attr "length_immediate" "1")
+ [(set_attr "type" "sse4arg")
(set_attr "mode" "TI")])
;; Pcomtrue and pcomfalse support. These are useless instructions, but are
@@ -25792,10 +25782,7 @@
? "vpcomtrue<ssemodesuffix>\t{%2, %1, %0|%0, %1, %2}"
: "vpcomfalse<ssemodesuffix>\t{%2, %1, %0|%0, %1, %2}");
}
- [(set_attr "type" "ssecmp")
- (set_attr "prefix_data16" "0")
- (set_attr "prefix_extra" "2")
- (set_attr "length_immediate" "1")
+ [(set_attr "type" "sse4arg")
(set_attr "mode" "TI")])
(define_insn "xop_vpermil2<mode>3"
@@ -25809,7 +25796,6 @@
"TARGET_XOP"
"vpermil2<ssemodesuffix>\t{%4, %3, %2, %1, %0|%0, %1, %2, %3, %4}"
[(set_attr "type" "sse4arg")
- (set_attr "length_immediate" "1")
(set_attr "mode" "<MODE>")])
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;