diff mbox series

drm/bridge: it6505: Check power state with it6505->powered in IRQ handler

Message ID 20230727100131.2338127-1-treapking@chromium.org
State New
Headers
Series drm/bridge: it6505: Check power state with it6505->powered in IRQ handler |

Commit Message

Pin-yen Lin July 27, 2023, 10:01 a.m. UTC 
  On system resume, the driver might call it6505_poweron directly if the
runtime PM hasn't been enabled. In such case, pm_runtime_get_if_in_use
will always return 0 because dev->power.runtime_status stays at
RPM_SUSPENDED, and the IRQ will never be handled.

Use it6505->powered from the driver struct fixes this because it always
gets updated when it6505_poweron is called.

Fixes: 5eb9a4314053 ("drm/bridge: it6505: Guard bridge power in IRQ handler")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>

---

 drivers/gpu/drm/bridge/ite-it6505.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Comments

Neil Armstrong Aug. 1, 2023, 9:37 a.m. UTC | #1 
On 27/07/2023 12:01, Pin-yen Lin wrote:
> On system resume, the driver might call it6505_poweron directly if the
> runtime PM hasn't been enabled. In such case, pm_runtime_get_if_in_use
> will always return 0 because dev->power.runtime_status stays at
> RPM_SUSPENDED, and the IRQ will never be handled.
> 
> Use it6505->powered from the driver struct fixes this because it always
> gets updated when it6505_poweron is called.
> 
> Fixes: 5eb9a4314053 ("drm/bridge: it6505: Guard bridge power in IRQ handler")
> Signed-off-by: Pin-yen Lin <treapking@chromium.org>
> 
> ---
> 
>   drivers/gpu/drm/bridge/ite-it6505.c | 4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
> index 6c2fcd8b8780..2f300f5ca051 100644
> --- a/drivers/gpu/drm/bridge/ite-it6505.c
> +++ b/drivers/gpu/drm/bridge/ite-it6505.c
> @@ -2517,9 +2517,11 @@ static irqreturn_t it6505_int_threaded_handler(int unused, void *data)
>   	};
>   	int int_status[3], i;
>   
> -	if (it6505->enable_drv_hold || pm_runtime_get_if_in_use(dev) <= 0)
> +	if (it6505->enable_drv_hold || !it6505->powered)
>   		return IRQ_HANDLED;
>   
> +	pm_runtime_get_sync(dev);
> +
>   	int_status[0] = it6505_read(it6505, INT_STATUS_01);
>   	int_status[1] = it6505_read(it6505, INT_STATUS_02);
>   	int_status[2] = it6505_read(it6505, INT_STATUS_03);

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Neil Armstrong Aug. 3, 2023, 8:32 a.m. UTC | #2 
Hi,

On Thu, 27 Jul 2023 18:01:10 +0800, Pin-yen Lin wrote:
> On system resume, the driver might call it6505_poweron directly if the
> runtime PM hasn't been enabled. In such case, pm_runtime_get_if_in_use
> will always return 0 because dev->power.runtime_status stays at
> RPM_SUSPENDED, and the IRQ will never be handled.
> 
> Use it6505->powered from the driver struct fixes this because it always
> gets updated when it6505_poweron is called.
> 
> [...]

Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-fixes)

[1/1] drm/bridge: it6505: Check power state with it6505->powered in IRQ handler
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=e9d699af3f65d62cf195f0e7a039400093ab2af2
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index 6c2fcd8b8780..2f300f5ca051 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -2517,9 +2517,11 @@  static irqreturn_t it6505_int_threaded_handler(int unused, void *data)
 	};
 	int int_status[3], i;
 
-	if (it6505->enable_drv_hold || pm_runtime_get_if_in_use(dev) <= 0)
+	if (it6505->enable_drv_hold || !it6505->powered)
 		return IRQ_HANDLED;
 
+	pm_runtime_get_sync(dev);
+
 	int_status[0] = it6505_read(it6505, INT_STATUS_01);
 	int_status[1] = it6505_read(it6505, INT_STATUS_02);
 	int_status[2] = it6505_read(it6505, INT_STATUS_03);