[1/2] ARM: dts: ti: add missing space before {
Commit Message
Add missing whitespace between node name/label and opening {.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts | 2 +-
arch/arm/boot/dts/ti/keystone/keystone-k2l.dtsi | 2 +-
arch/arm/boot/dts/ti/omap/am437x-idk-evm.dts | 8 ++++----
3 files changed, 6 insertions(+), 6 deletions(-)
Comments
On 7/5/23 9:57 AM, Krzysztof Kozlowski wrote:
> Add missing whitespace between node name/label and opening {.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: David Lechner <david@lechnology.com>
Hi Krzysztof Kozlowski,
On Wed, 05 Jul 2023 16:57:54 +0200, Krzysztof Kozlowski wrote:
> Add missing whitespace between node name/label and opening {.
>
>
I have applied the following to branch ti-k3-dts-next on [1].
Thank you!
[2/2] arm64: dts: ti: add missing space before {
commit: 48a498a269c60cd3ca3de87761a1016aa7de9593
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
On 16:57-20230705, Krzysztof Kozlowski wrote:
> Add missing whitespace between node name/label and opening {.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts | 2 +-
> arch/arm/boot/dts/ti/keystone/keystone-k2l.dtsi | 2 +-
> arch/arm/boot/dts/ti/omap/am437x-idk-evm.dts | 8 ++++----
Tony: Could you pick this up?
Reviewed-by: Nishanth Menon <nm@ti.com>
> 3 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts b/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts
> index afd04a423856..17a1632a8ac1 100644
> --- a/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts
> +++ b/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts
> @@ -391,7 +391,7 @@ &spi1 {
> pinctrl-names = "default";
> cs-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
>
> - display@0{
> + display@0 {
> compatible = "lego,ev3-lcd";
> reg = <0>;
> spi-max-frequency = <10000000>;
> diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2l.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2l.dtsi
> index 8949578e62e8..2062fe561642 100644
> --- a/arch/arm/boot/dts/ti/keystone/keystone-k2l.dtsi
> +++ b/arch/arm/boot/dts/ti/keystone/keystone-k2l.dtsi
> @@ -137,7 +137,7 @@ uart01_spi2_pins: uart01-spi2-pins {
> >;
> };
>
> - dfesync_rp1_pins: dfesync-rp1-pins{
> + dfesync_rp1_pins: dfesync-rp1-pins {
> pinctrl-single,bits = <
> /* DFESYNC_RP1_SEL */
> 0x0 0x0 0x2
> diff --git a/arch/arm/boot/dts/ti/omap/am437x-idk-evm.dts b/arch/arm/boot/dts/ti/omap/am437x-idk-evm.dts
> index 863552393c07..edaddc7b6a5e 100644
> --- a/arch/arm/boot/dts/ti/omap/am437x-idk-evm.dts
> +++ b/arch/arm/boot/dts/ti/omap/am437x-idk-evm.dts
> @@ -58,7 +58,7 @@ vdd_core: fixed-regulator-vdd_core {
> vin-supply = <&vdd_corereg>;
> };
>
> - v1_8dreg: fixed-regulator-v1_8dreg{
> + v1_8dreg: fixed-regulator-v1_8dreg {
> compatible = "regulator-fixed";
> regulator-name = "V1_8DREG";
> regulator-min-microvolt = <1800000>;
> @@ -68,7 +68,7 @@ v1_8dreg: fixed-regulator-v1_8dreg{
> vin-supply = <&v24_0d>;
> };
>
> - v1_8d: fixed-regulator-v1_8d{
> + v1_8d: fixed-regulator-v1_8d {
> compatible = "regulator-fixed";
> regulator-name = "V1_8D";
> regulator-min-microvolt = <1800000>;
> @@ -78,7 +78,7 @@ v1_8d: fixed-regulator-v1_8d{
> vin-supply = <&v1_8dreg>;
> };
>
> - v1_5dreg: fixed-regulator-v1_5dreg{
> + v1_5dreg: fixed-regulator-v1_5dreg {
> compatible = "regulator-fixed";
> regulator-name = "V1_5DREG";
> regulator-min-microvolt = <1500000>;
> @@ -88,7 +88,7 @@ v1_5dreg: fixed-regulator-v1_5dreg{
> vin-supply = <&v24_0d>;
> };
>
> - v1_5d: fixed-regulator-v1_5d{
> + v1_5d: fixed-regulator-v1_5d {
> compatible = "regulator-fixed";
> regulator-name = "V1_5D";
> regulator-min-microvolt = <1500000>;
> --
> 2.34.1
>
* Nishanth Menon <nm@ti.com> [230711 16:50]:
> On 16:57-20230705, Krzysztof Kozlowski wrote:
> > Add missing whitespace between node name/label and opening {.
> >
> > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > ---
> > arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts | 2 +-
> > arch/arm/boot/dts/ti/keystone/keystone-k2l.dtsi | 2 +-
> > arch/arm/boot/dts/ti/omap/am437x-idk-evm.dts | 8 ++++----
>
> Tony: Could you pick this up?
>
> Reviewed-by: Nishanth Menon <nm@ti.com>
Thanks applying into omap-for-v6.6/dt.
Regards,
Tony
@@ -391,7 +391,7 @@ &spi1 {
pinctrl-names = "default";
cs-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
- display@0{
+ display@0 {
compatible = "lego,ev3-lcd";
reg = <0>;
spi-max-frequency = <10000000>;
@@ -137,7 +137,7 @@ uart01_spi2_pins: uart01-spi2-pins {
>;
};
- dfesync_rp1_pins: dfesync-rp1-pins{
+ dfesync_rp1_pins: dfesync-rp1-pins {
pinctrl-single,bits = <
/* DFESYNC_RP1_SEL */
0x0 0x0 0x2
@@ -58,7 +58,7 @@ vdd_core: fixed-regulator-vdd_core {
vin-supply = <&vdd_corereg>;
};
- v1_8dreg: fixed-regulator-v1_8dreg{
+ v1_8dreg: fixed-regulator-v1_8dreg {
compatible = "regulator-fixed";
regulator-name = "V1_8DREG";
regulator-min-microvolt = <1800000>;
@@ -68,7 +68,7 @@ v1_8dreg: fixed-regulator-v1_8dreg{
vin-supply = <&v24_0d>;
};
- v1_8d: fixed-regulator-v1_8d{
+ v1_8d: fixed-regulator-v1_8d {
compatible = "regulator-fixed";
regulator-name = "V1_8D";
regulator-min-microvolt = <1800000>;
@@ -78,7 +78,7 @@ v1_8d: fixed-regulator-v1_8d{
vin-supply = <&v1_8dreg>;
};
- v1_5dreg: fixed-regulator-v1_5dreg{
+ v1_5dreg: fixed-regulator-v1_5dreg {
compatible = "regulator-fixed";
regulator-name = "V1_5DREG";
regulator-min-microvolt = <1500000>;
@@ -88,7 +88,7 @@ v1_5dreg: fixed-regulator-v1_5dreg{
vin-supply = <&v24_0d>;
};
- v1_5d: fixed-regulator-v1_5d{
+ v1_5d: fixed-regulator-v1_5d {
compatible = "regulator-fixed";
regulator-name = "V1_5D";
regulator-min-microvolt = <1500000>;