diff mbox series

[v2,1/2] dt-bindings:iio:frequency:admv1013: add vcc regs

Message ID 20230727110121.93546-1-antoniu.miclaus@analog.com
State New
Headers
Series [v2,1/2] dt-bindings:iio:frequency:admv1013: add vcc regs |

Commit Message

Antoniu Miclaus July 27, 2023, 11:01 a.m. UTC 
  Add bindings for the VCC regulators of the ADMV1013 microware
upconverter.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
changes in v2:
 - make the vcc regulators as required.
 .../bindings/iio/frequency/adi,admv1013.yaml  | 60 +++++++++++++++++++
 1 file changed, 60 insertions(+)

Comments

Krzysztof Kozlowski July 27, 2023, 11:06 a.m. UTC | #1 
On 27/07/2023 13:01, Antoniu Miclaus wrote:
> Add bindings for the VCC regulators of the ADMV1013 microware
> upconverter.
> 
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
> ---
> changes in v2:
>  - make the vcc regulators as required.

No improvements in the subject... Please wait some time before sending
new versions.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
index fc813bcb6532..f2eb2287ed9e 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
@@ -39,6 +39,46 @@  properties:
     description:
       Analog voltage regulator.
 
+  vcc-drv-supply:
+    description:
+      RF Driver voltage regulator.
+
+  vcc2-drv-supply:
+    description:
+      RF predriver voltage regulator.
+
+  vcc-vva-supply:
+    description:
+      VVA Control Circuit voltage regulator.
+
+  vcc-amp1-supply:
+    description:
+      RF Amplifier 1 voltage regulator.
+
+  vcc-amp2-supply:
+    description:
+      RF Amplifier 2 voltage regulator.
+
+  vcc-env-supply:
+    description:
+      Envelope Detector voltage regulator.
+
+  vcc-bg-supply:
+    description:
+      Mixer Chip Band Gap Circuit voltage regulator.
+
+  vcc-bg2-supply:
+    description:
+      VGA Chip Band Gap Circuit voltage regulator.
+
+  vcc-mixer-supply:
+    description:
+      Mixer voltage regulator.
+
+  vcc-quad-supply:
+    description:
+      Quadruppler voltage regulator.
+
   adi,detector-enable:
     description:
       Enable the Envelope Detector available at output pins VENV_P and
@@ -69,6 +109,16 @@  required:
   - clocks
   - clock-names
   - vcm-supply
+  - vcc-drv-supply
+  - vcc2-drv-supply
+  - vcc-vva-supply
+  - vcc-amp1-supply
+  - vcc-amp2-supply
+  - vcc-env-supply
+  - vcc-bg-supply
+  - vcc-bg2-supply
+  - vcc-mixer-supply
+  - vcc-quad-supply
 
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
@@ -87,6 +137,16 @@  examples:
         clocks = <&admv1013_lo>;
         clock-names = "lo_in";
         vcm-supply = <&vcm>;
+        vcc-drv-supply = <&vcc_drv>;
+        vcc2-drv-supply = <&vcc2_drv>;
+        vcc-vva-supply = <&vcc_vva>;
+        vcc-amp1-supply = <&vcc_amp1>;
+        vcc-amp2-supply = <&vcc_amp2>;
+        vcc-env-supply = <&vcc_env>;
+        vcc-bg-supply = <&vcc_bg>;
+        vcc-bg2-supply = <&vcc_bg2>;
+        vcc-mixer-supply = <&vcc_mixer>;
+        vcc-quad-supply = <&vcc_quad>;
         adi,quad-se-mode = "diff";
         adi,detector-enable;
       };